a. The derivative of f(x) = (x^2 - x + 2)^4 is f'(x) = 4(x^2 - x + 2)^3(2x - 1).
b. To find f'(1), substitute x = 1 into the derivative function: f'(1) = 4(1^2 - 1 + 2)^3(2(1) - 1).
a. To find the derivative of f(x) = (x^2 - x + 2)^4, we apply the chain rule. The derivative of (x^2 - x + 2) with respect to x is 2x - 1, and when raised to the power of 4, it becomes (2x - 1)^4. Therefore, the derivative of f(x) is f'(x) = 4(x^2 - x + 2)^3(2x - 1).
b. To find f'(1), we substitute x = 1 into the derivative function: f'(1) = 4(1^2 - 1 + 2)^3(2(1) - 1). Simplifying this expression gives f'(1) = 4(2)^3(1) = 32.
2. In the price-demand equation 0.2x + 2p = 900, where p is the price per gallon in dollars and x is the daily demand measured in millions of gallons:
a. To find the price that should be charged if the demand is 30 million gallons, we substitute x = 30 into the equation and solve for p: 0.2(30) + 2p = 900. Simplifying this equation gives 6 + 2p = 900, and solving for p yields p = 447. Therefore, the price should be charged at $447 per gallon.
b. If the price increases by $0.5, we can calculate the decrease in demand by solving the equation for the new demand, x': 0.2x' + 2(p + 0.5) = 900. Subtracting this equation from the original equation gives 0.2x - 0.2x' = 2(p + 0.5) - 2p, which simplifies to 0.2(x - x') = 1. Solving for x - x', we find x - x' = 1/0.2 = 5 million gallons. Therefore, the demand decreases by 5 million gallons when the price increases by $0.5.
Learn more about chain rule here:
https://brainly.com/question/31585086
#SPJ11
Let Σε α, = 1 n=1 Question 1 (20 points): a) [10 points] Which test is most appropriate In(n+7) for series: Σ ? n=1 n+2 b) [10 points) Determine whether the above series is convergent or divergent.
The question asks about the most appropriate test to determine the convergence or divergence of the series Σ (In(n+7) / (n+2)), and then it seeks to determine if the series is convergent or divergent.
a) To determine the most appropriate test for the series Σ (In(n+7) / (n+2)), we can consider the comparison test. The comparison test states that if 0 ≤ aₙ ≤ bₙ for all n, and Σ bₙ converges, then Σ aₙ also converges. In this case, we can compare the given series with the harmonic series, which is a well-known divergent series. By comparing the terms, we can see that In(n+7) / (n+2) is greater than or equal to 1/n for sufficiently large n. Since the harmonic series diverges, we can conclude that the given series also diverges.
b) Based on the comparison test and the conclusion from part a), we can determine that the series Σ (In(n+7) / (n+2)) is divergent. Therefore, the series does not converge to a finite value as the number of terms increases. It diverges, meaning that the sum of its terms goes to infinity.
Learn more about series here: https://brainly.com/question/32525627
#SPJ11
What is the factorization of 729x15 + 1000?
(9x5 + 10)(81x10 – 90x5 + 100)
(9x5 + 10)(81x5 – 90x10 + 100)
(9x3 + 10)(81x6 – 90x6 + 100)
(9x3 + 10)(81x9 – 90x3 + 100)
The Factorization of 729x^15 + 1000 is (9x^5 + 10)(81x^10 - 90x^5 + 100)
To factorize the expression 729x^15 + 1000, we need to recognize that it follows the pattern of a sum of cubes.
The sum of cubes can be factored using the formula:
a^3 + b^3 = (a + b)(a^2 - ab + b^2)
In this case, we have a = 9x^5 and b = 10. Plugging these values into the formula, we get:
729x^15 + 1000 = (9x^5 + 10)((9x^5)^2 - (9x^5)(10) + 10^2)
Simplifying further:
729x^15 + 1000 = (9x^5 + 10)(81x^10 - 90x^5 + 100)
Therefore, the factorization of 729x^15 + 1000 is (9x^5 + 10)(81x^10 - 90x^5 + 100).
To know more about Factorization .
https://brainly.com/question/14268870
#SPJ8
Find the internal volume of an ideal solenoid (L = 0.1 H) if the length of the inductor is 3 cm and the number of loops is 100. a) 0.02 m3 b) 0.06 m3 c) 0.007 m3 d) 0.005 m3
The internal volume of an ideal solenoid is approximately 0.000003 m³. None of the given options (a) 0.02 m³, b) 0.06 m³, c) 0.007 m³, d) 0.005 m³) is the correct answer.
The volume of a solenoid can be approximated by considering it as a cylinder. The formula to calculate the volume of a cylinder is V = πr²h, where r is the radius and h is the height.
To find the internal volume of an ideal solenoid, we need to consider its dimensions and the number of loops.
Given that the length of the inductor (height of the solenoid) is 3 cm (or 0.03 m) and the number of loops is 100, we can calculate the radius using the formula r = L / (2πn), where L is the inductance and n is the number of loops.
Substituting the given values, we get r = 0.1 / (2π * 100) = 0.00159 m.
Now we can calculate the volume using the formula
V = π(0.00159)² * 0.03 = 0.0000032 m³.
Converting the volume to cubic meters, we get 0.0000032 m³, which is approximately 0.000003 m³.
Therefore, none of the given options (a) 0.02 m³, b) 0.06 m³, c) 0.007 m³, d) 0.005 m³) is the correct answer.
To learn more about volume of a cylinder visit:
brainly.com/question/27033747
#SPJ11
Show that the set of all nilpotent elements in a commuative ring
forms an ideal.
Here, r is nilpotent if rn = 0 for some positive
integer n > 0.
To prove that the set of all nilpotent elements forms an ideal, we need to verify two conditions: closure under addition and closure under multiplication by any element in the ring.
Closure under addition: Let a and b be nilpotent elements in the commutative ring. This means that there exist positive integers m and n such that a^m = 0 and b^n = 0. Consider the sum a + b. We can expand (a + b)^(m + n) using the binomial theorem and observe that all terms involving a^i or b^j, where i ≥ m and j ≥ n, will be zero. Hence, (a + b)^(m + n) = 0, showing closure under addition.
Closure under multiplication: Let a be a nilpotent element in the commutative ring, and let r be any element in the ring. We want to show that ar is also nilpotent.
Since a is nilpotent, there exists a positive integer k such that a^k = 0. By raising both sides of the equation to the power of k, we get (a^k)^k = 0^k, which simplifies to a^(k^2) = 0. Therefore, (ar)^(k^2) = a^(k^2)r^(k^2) = 0, proving closure under multiplication.
By satisfying both closure conditions, the set of all nilpotent elements in a commutative ring forms an ideal.
Learn more about nilpotent elements : brainly.com/question/29348107
#SPJ11
Find the least integer n such that f(x) is 0(x") for each of these functions. a) f(x) = 2x3 + x² logx b) f(x) = 3x3 + (log x) c) f(x) = (x+ + x2 + 1)/(x3 + 1) d) f(x) = (x+ + 5 log x)/(x+
we can say that functions (a) and (b) are the functions whose least integer n such that f(x) is 0(xⁿ) is 3.
Given functions:
a) f(x) = 2x³ + x²logxb) f(x) = 3x³ + (log x)c) f(x) = (x² + x² + 1)/(x³ + 1)d) f(x) = (x² + 5log x)/(x³ + x)
For a function to be 0 (xⁿ), where n is a natural number, the highest power of x must be n.
Therefore, we need to identify the degree of each function: a) f(x) = 2x³ + x²logx
Here, the degree of the function is 3. Hence, n = 3.
Therefore, f(x) is 0(x³)
b) f(x) = 3x³ + (log x)
The degree of the function is 3. Hence, n = 3. Therefore, f(x) is 0(x³)
c) f(x) = (x² + x² + 1)/(x³ + 1)
The degree of the function in the numerator is 2.
The degree of the function in the denominator is 3.
Therefore, the degree of the function is less than 3. Hence, we cannot express it as 0(xⁿ).
d) f(x) = (x² + 5log x)/(x³ + x)
The degree of the function in the numerator is 2.
The degree of the function in the denominator is 3.
Therefore, the degree of the function is less than 3. Hence, we cannot express it as 0(xⁿ).
To learn more about function click here https://brainly.com/question/31062578
#SPJ11
Find the directional derivative of the function at the point P in the direction of the point Q. f(x, y, z) = xy – xy2z2, P(1,-1, 2), Q(5, 1, 6) = Duf(1,-1, 2) = 1 = x
The directional derivative of the function [tex]f(x, y, z) = xy - xy^2z^2[/tex] at the point P(1, -1, 2) in the direction of the point Q(5, 1, 6) is -25/3.
What is derivative?In mathematics, a quantity's instantaneous rate of change with respect to another is referred to as its derivative. Investigating the fluctuating nature of an amount is beneficial.
To find the directional derivative of the function [tex]f(x, y, z) = xy - xy^2z^2[/tex] at the point P(1, -1, 2) in the direction of the point Q(5, 1, 6), we need to calculate the gradient of f at P and then take the dot product with the unit vector in the direction of Q.
First, let's calculate the gradient of f(x, y, z):
∇f(x, y, z) = (∂f/∂x, ∂f/∂y, ∂f/∂z)
Taking partial derivatives of f(x, y, z) with respect to x, y, and z:
∂f/∂x [tex]= y - y^2z^2[/tex]
∂f/∂y [tex]= x - 2xyz^2[/tex]
∂f/∂z [tex]= -2xy^2z[/tex]
Now, let's evaluate the gradient at the point P(1, -1, 2):
∇f(1, -1, 2) = (∂f/∂x, ∂f/∂y, ∂f/∂z) [tex]= (y - y^2z^2, x - 2xyz^2, -2xy^2z)[/tex]
Substituting the coordinates of P:
∇f(1, -1, 2) [tex]= (-1 - (-1)^2(2)^2, 1 - 2(1)(-1)(2)^2, -2(1)(-1)^2(2))[/tex]
Simplifying:
∇f(1, -1, 2) = (-1 - 1(4), 1 - 2(1)(4), -2(1)(1)(2))
= (-5, 1 - 8, -4)
= (-5, -7, -4)
Now, let's find the unit vector in the direction of Q(5, 1, 6):
u = Q - P / ||Q - P||
where ||Q - P|| represents the norm (magnitude) of Q - P.
Calculating Q - P:
Q - P = (5 - 1, 1 - (-1), 6 - 2)
= (4, 2, 4)
Calculating the norm of Q - P:
||Q - P|| = √[tex](4^2 + 2^2 + 4^2)[/tex]
= √(16 + 4 + 16)
= √36
= 6
Now, let's find the unit vector in the direction of Q:
u = (4, 2, 4) / 6
= (2/3, 1/3, 2/3)
Finally, to find the directional derivative Duf(1, -1, 2) in the direction of Q:
Duf(1, -1, 2) = ∇f(1, -1, 2) · u
Calculating the dot product:
Duf(1, -1, 2) = (-5, -7, -4) · (2/3, 1/3, 2/3)
= (-5)(2/3) + (-7)(1/3) + (-4)(2/3)
= -10/3 - 7/3 - 8/3
= -25/3
Therefore, the directional derivative of the function [tex]f(x, y, z) = xy - xy^2z^2[/tex] at the point P(1, -1, 2) in the direction of the point Q(5, 1, 6) is -25/3.
Learn more about derivative on:
https://brainly.com/question/23819325
#SPJ4
12 . Find the area of the region that lies inside the first curve and outside the second curve. (You can use a calculator to find this area). (8pts.) = 9cos(0) r=4+ cos(0) r=
The area of the region that lies inside the first curve and outside the second curve is approximately [tex]-8\sqrt{3} - (16\pi/3).[/tex]
What is the area of a region under a curve?
The area of a region under a curve can be found using definite integration. If we have a curve defined by a function f(x) on an interval [a, b], the area A under the curve can be calculated using the definite integral as follows:
[tex]A = {\int[a, b] f(x) dx[/tex]
To find the area of the region that lies inside the first curve and outside the second curve, we need to determine the intersection points of the two curves and then integrate the difference between the two curves over that interval.
The first curve is given by the equation[tex]$r = 9\cos(\theta)$,[/tex] and the second curve is given by [tex]r = 4 + \cos(\theta)$.[/tex]
To find the intersection points, we set the two equations equal to each other:
[tex]\[9\cos(\theta) = 4 + \cos(\theta)\][/tex]
Simplifying the equation, we have:
[tex]\[8\cos(\theta) = 4\][/tex]
Dividing both sides by 8:
[tex]\[\cos(\theta) = 0.5\][/tex]
To find the values of [tex]$\theta$[/tex] that satisfy this equation, we can use the inverse cosine function:
[tex]\[\theta = \cos^{-1}(0.5)\][/tex]
Using a calculator, we find that the solutions are [tex]$\theta = \frac{\pi}{3}$[/tex] and [tex]\theta = \frac{5\pi}{3}$.[/tex]
To calculate the area between the two curves, we need to integrate the difference between the two curves over the interval [tex][\frac{\pi}{3}, \frac{5\pi}{3}]$:[/tex]
[tex]\[Area = \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} (9\cos(\theta) - (4 + \cos(\theta))) d\theta\][/tex]
Evaluating this integral will give us the desired area.
To evaluate the integral and find the area, we need to integrate the difference between the two curves over the interval [tex][\frac{\pi}{3}, \frac{5\pi}{3}]$:[/tex]
[tex]\[Area = \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} (9\cos(\theta) - (4 + \cos(\theta))) d\theta\][/tex]
Let's simplify the integrand first:
[tex]\[Area = \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} (9\cos(\theta) - 4 - \cos(\theta)) d\theta\]\[= \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} (8\cos(\theta) - 4) d\theta\][/tex]
Now we can integrate term by term:
[tex]\[Area = \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} 8\cos(\theta) d\theta - \int_{\frac{\pi}{3}}^{\frac{5\pi}{3}} 4 d\theta\][/tex]
Integrating each term:
[tex]\[\int \cos(\theta) d\theta = \sin(\theta)\]\[\int 4 d\theta = 4\theta\][/tex]
Applying the limits of integration:
[tex]\[Area = [8\sin(\theta)]_{\frac{\pi}{3}}^{\frac{5\pi}{3}} - [4\theta]_{\frac{\pi}{3}}^{\frac{5\pi}{3}}\][/tex]
Plugging in the limits:
[tex]\[Area = 8\sin(\frac{5\pi}{3}) - 8\sin(\frac{\pi}{3}) - 4(\frac{5\pi}{3} - \frac{\pi}{3})\][/tex]
Evaluating
[tex]$\sin(\frac{5\pi}{3})$ and $\sin(\frac{\pi}{3})$:\[\sin(\frac{5\pi}{3}) = -\frac{\sqrt{3}}{2}\]\[\sin(\frac{\pi}{3}) = \frac{\sqrt{3}}{2}\][/tex]
Plugging in these values:
[tex]\[Area = 8(-\frac{\sqrt{3}}{2}) - 8(\frac{\sqrt{3}}{2}) - 4(\frac{5\pi}{3} - \frac{\pi}{3})\]\[= -4\sqrt{3} - 4\sqrt{3} - 4(\frac{4\pi}{3})\]\[= -8\sqrt{3} - \frac{16\pi}{3}\][/tex]
So, the area of the region that lies inside the first curve and outside the second curve is approximately[tex]$-8\sqrt{3} - \frac{16\pi}{3}$.[/tex]
Learn more about the area of a region under a curve:
https://brainly.com/question/29192129
#SPJ4
The null and alternate hypotheses are:
H0 : μ1 = μ2
H1 : μ1 ≠ μ2
A random sample of 12 observations from one population revealed a sample mean of 25 and a sample standard deviation of 4.5. A random sample of 8 observations from another population revealed a sample mean of 30 and a sample standard deviation of 3.5.
At the 0.01 significance level, is there a difference between the population means?
a. State the decision rule. (Negative amounts should be indicated by a minus sign. Round your answer to 3 decimal places.)
The decision rule is to reject H0 if t < or t > .
b. Compute the pooled estimate of the population variance. (Round your answer to 3 decimal places.)
Pooled estimate of the population variance c. Compute the test statistic. (Negative amount should be indicated by a minus sign. Round your answer to 3 decimal places.)
Test statistic d. State your decision about the null hypothesis.
(Click to select)RejectDo not reject H0 .
e. The p-value is (Click to select)between 0.05 and 0.1between 0.2 and 0.05between 0.01 and 0.02between 0.1 and 0.2less than 0.1.
a. The decision rule is to reject H₀ if t < -tα/2 or t > tα/2.
b. the pooled estimate of the population variance is 18.429.
c. The test statistic is -2.601.
d. Since the test statistic falls within the rejection region, we reject the null hypothesis (H₀).
e. The p-value is the probability of obtaining a test statistic as extreme as the observed value, assuming the null hypothesis is true.
What is null hypothesis?A hypothesis known as the null hypothesis states that sample observations are the result of chance. It is claimed to be a claim made by surveyors who wish to look at the data. The symbol for it is H₀.
a. The decision rule is to reject H₀ if t < -tα/2 or t > tα/2.
b. To compute the pooled estimate of the population variance, we can use the formula:
Pooled estimate of the population variance = ((n₁ - 1) * s₁² + (n₂ - 1) * s₂²) / (n₁ + n₂ - 2)
Plugging in the values, we get:
Pooled estimate of the population variance = ((12 - 1) * 4.5² + (8 - 1) * 3.5²) / (12 + 8 - 2) = 18.429
c. The test statistic can be calculated using the formula:
Test statistic = (x₁ - x₂) / √((s₁² / n₁) + (s₂² / n₂))
Plugging in the values, we get:
Test statistic = (25 - 30) / √((4.5² / 12) + (3.5² / 8)) ≈ -2.601
d. Since the test statistic falls within the rejection region, we reject the null hypothesis (H₀).
e. The p-value is the probability of obtaining a test statistic as extreme as the observed value, assuming the null hypothesis is true. In this case, the p-value is less than 0.01 (0.01 significance level), indicating strong evidence against the null hypothesis.
Learn more about null hypothesis on:
https://brainly.com/question/28042334
#SPJ4
2. Given initial value problem { vio="+ 57100 " 5y = y(0) = 3 & y'(0) = 1 (a) Solve the initial value problem. = (b) Write the solution in the format y = A cos(wt – °) (c) Find the amplitude & peri
(a) y = -285500 + 285503e^(1/5y)
(b) The solution in the desired format is: y = A cos(wt - φ) - 285500
(c) The amplitude of the solution is 285503, and the period is 10π.
To solve the given initial value problem { vio="+ 57100 " 5y = y(0) = 3 & y'(0) = 1, let's go through each step.
(a) Solve the initial value problem:
The given differential equation is 5y = y' + 57100. To solve this, we'll first find the general solution by rearranging the equation:
5y - y' = 57100
This is a first-order linear ordinary differential equation. We can solve it by finding the integrating factor. The integrating factor is given by e^(∫-1/5dy) = e^(-1/5y). Multiplying the integrating factor throughout the equation, we get:
e^(-1/5y) * (5y - y') = e^(-1/5y) * 57100
Now, we can simplify the left-hand side using the product rule:
(e^(-1/5y) * 5y) - (e^(-1/5y) * y') = e^(-1/5y) * 57100
Differentiating e^(-1/5y) with respect to y gives us -1/5 * e^(-1/5y). Therefore, the equation becomes:
5e^(-1/5y) * y - e^(-1/5y) * y' = e^(-1/5y) * 57100
Now, we can rewrite the equation as a derivative of a product:
(d/dy) [e^(-1/5y) * y] = 57100 * e^(-1/5y)
Integrating both sides with respect to y, we have:
∫(d/dy) [e^(-1/5y) * y] dy = ∫57100 * e^(-1/5y) dy
Integrating the left-hand side gives us:
e^(-1/5y) * y = ∫57100 * e^(-1/5y) dy
To find the integral on the right-hand side, we can make a substitution u = -1/5y. Then, du = -1/5 dy, and the integral becomes:
∫-5 * 57100 * e^u du = -285500 * ∫e^u du
Integrating e^u with respect to u gives us e^u, so the equation becomes:
e^(-1/5y) * y = -285500 * e^(-1/5y) + C
Multiplying through by e^(1/5y), we get:
y = -285500 + Ce^(1/5y)
To find the constant C, we'll use the initial condition y(0) = 3. Substituting y = 3 and solving for C, we have:
3 = -285500 + Ce^(1/5 * 0)
3 = -285500 + C
Therefore, C = 285503. Substituting this back into the equation, we have:
y = -285500 + 285503e^(1/5y)
(b) Write the solution in the format y = A cos(wt – φ):
To write the solution in the desired format, we need to manipulate the equation further. We'll rewrite the equation as:
y + 285500 = 285503e^(1/5y)
Let A = 285503 and w = 1/5. The equation becomes:
y + 285500 = Ae^(wt)
Since e^(wt) = cos(wt) + i sin(wt), we can write the equation as:
y + 285500 = A(cos(wt) + i sin(wt))
Now, we'll convert this equation to the desired format by using Euler's formula: e^(iθ) = cos(θ) + i sin(θ). Let φ be the phase shift such that wt - φ = θ. The equation becomes:
y + 285500 = A(cos(wt - φ) + i sin(wt - φ))
Since y is a real-valued function, the imaginary part of the equation must be zero. Therefore, we can ignore the imaginary part and write the equation as:
y + 285500 = A cos(wt - φ)
So, the solution in the desired format is:
y = A cos(wt - φ) - 285500
(c) Find the amplitude and period:
From the equation y = A cos(wt - φ) - 285500, we can see that the amplitude is |A| (absolute value of A) and the period is 2π/w.
In our case, A = 285503 and w = 1/5. Therefore, the amplitude is |285503| = 285503, and the period is 2π / (1/5) = 10π.
Hence, the amplitude of the solution is 285503, and the period is 10π.
To know more about amplitude, visit the link : https://brainly.com/question/3613222
#SPJ11
Given f(x, y) = – 2 + 4xyº, find , x5 5 = fxz(x, y) = fry(x, y) = f(x, y) =
Partial derivative with respect to x (fx) = 4y^2, Partial derivative with respect to y (fy) = 8xy, Gradient vector (∇f) = <4y^2, 8xy>, Value of f(x, y) = -2 + 4xy^2
Partial derivative with respect to x (fx):To find fx, we differentiate f(x, y) with respect to x while treating y as a constant: fx = ∂f/∂x = 4y^2
Partial derivative with respect to y (fy):To find fy, we differentiate f(x, y) with respect to y while treating x as a constant: fy = ∂f/∂y = 8xy
Gradient vector (∇f):The gradient vector, denoted as ∇f, is a vector composed of the partial derivatives of f(x, y): ∇f = <fx, fy> = <4y^2, 8xy>
Evaluating f(x, y):To find the value of f(x, y), we substitute the given values of x and y into the function: f(x, y) = -2 + 4xy^2
to know more about partial derivatives, click: brainly.com/question/28750217
#SPJ11
i need the work shown for this question
Answer:
LM = 16, TU = 24 , QP = 32
Step-by-step explanation:
the midsegment TU is half the sum of the bases, that is
[tex]\frac{1}{2}[/tex] (LM + QP) = TU
[tex]\frac{1}{2}[/tex] (2x - 4 + 3x + 2) = 2x + 4
[tex]\frac{1}{2}[/tex] (5x - 2) = 2x + 4 ← multiply both sides by 2 to clear the fraction
5x - 2 = 4x + 8 ( subtract 4x from both sides )
x - 2 = 8 ( add 2 to both sides )
x = 10
Then
LM = 2x - 4 = 2(10) - 4 = 20 - 4 = 16
TU = 2x + 4 = 2(10) + 4 = 20 + 4 = 24
QP = 3x + 2 = 3(10) + 2 = 30 + 2 = 32
Solve the simultaneous equations
2x + 5y = 4
7x - 5y = -1
By algebra properties, the solution to the system of linear equations is (x, y) = (1 / 3, 2 / 3).
How to solve a system of linear equations
In this problem we find a system of two linear equations with two variables, whose solution should be found. This can be done by means of algebra properties. First, write the entire system:
2 · x + 5 · y = 4
7 · x - 5 · y = - 1
Second, clear variable x in the first expression:
2 · x + 5 · y = 4
x + (5 / 2) · y = 2
x = 2 - (5 / 2) · y
Third, substitute on second expression:
7 · [2 - (5 / 2) · y] - 5 · y = - 1
Fourth, simplify the expression:
14 - (35 / 2) · y - 5 · y = - 1
14 - (45 / 2) · y = - 1
15 = (45 / 2) · y
30 = 45 · y
y = 30 / 45
y = 2 / 3
Fifth, compute the variable x:
x = 2 - (5 / 2) · (2 / 3)
x = 2 - 5 / 3
x = 1 / 3
To learn more on systems of linear equations: https://brainly.com/question/20899123
#SPJ1
A medical researcher wanted to test and compare the impact of three different dietary supplements as a means to examine to what extent dietary supplements can speed up wound healing times. She randomly selected 36 patients and then randomly divided this group into three subgroups: a ‘Placebo’ group who ingested sugar-pills; a ‘Vitamin X’ group who took vitamin pills; and a ‘Kale’ group who took Kale pills. The study involved the groups taking their pill-based supplements three times a day for one week and at the end, their wound healing times were recorded
What sort of research design is this?
a. Repeated-measures factorial design.
b. Independent factorial design.
c. ANOVA.
d. Multiple linear regression.
The research design described is an independent factorial design, as it involves randomly assigning participants to different groups and manipulating the independent variable (type of dietary supplement) to examine its impact on the dependent variable (wound healing times).
The research design described in the scenario is an independent factorial design. In this design, the researcher randomly assigns participants to different groups and manipulates the independent variable (type of dietary supplement) to examine its impact on the dependent variable (wound healing times). The independent variable has three levels (Placebo, Vitamin X, and Kale), and each participant is assigned to only one of these levels. This design allows for comparing the effects of different dietary supplements on wound healing times by examining the differences among the three groups.
In this study, the researcher randomly divided the 36 patients into three subgroups, ensuring that each subgroup represents a different level of the independent variable. The participants in each group took their assigned pill-based supplement three times a day for one week, and at the end of the week, their wound healing times were recorded. By comparing the wound healing times among the three groups, the researcher can assess the impact of the different dietary supplements on the outcome variable.
Overall, the study design employs an independent factorial design, which allows for investigating the effects of multiple independent variables (the different dietary supplements) on a dependent variable (wound healing times) while controlling for random assignment and reducing potential confounding variables.
Learn more about divided here: https://brainly.com/question/15381501
#SPJ11
Calculus II integrals
Find the area of the shaded region. y у y=x² y 84 By= 2 x+16 (1,6) 6 (2, 4) (-2, 4) 2 y = 8 - 2x) х 4 2. 4 -2 A= Read it Need Help?
Answer:
Area of shaded region is A = -144744
Step-by-step explanation:
To find the area of the shaded region, we need to identify the boundaries of the region and set up the integral.
From the given graph, we can see that the shaded region is bounded by the curves y = x^2, y = 2x + 16, and the y-axis.
To find the x-values where these curves intersect, we can set the equations equal to each other and solve for x:
x^2 = 2x + 16
Rearranging the equation, we get:
x^2 - 2x - 16 = 0
Using quadratic formula or factoring, we find that the solutions are x = -4 and x = 4.
Thus, the boundaries of the shaded region are x = -4 and x = 4.
To set up the integral for the area, we need to integrate with respect to y since the region is bounded vertically. The integral will be from y = 0 to y = 84.
The area can be calculated as follows:
A = ∫[0, 84] (upper curve - lower curve) dx
A = ∫[0, 84] [(2x + 16) - x^2] dx
Integrating, we have:
A = [x^2 + 16x - (x^3/3)]|[0, 84]
A = [(84^2 + 16(84) - (84^3/3)) - (0^2 + 16(0) - (0^3/3))]
A = [7056 + 1344 - (392^2)] - 0
A = 7056 + 1344 - 154144
A = -144744
Learn more about area:https://brainly.com/question/22972014
#SPJ11
Find the area between (bounded) by the curves y = x² + 10x and y = 2x + 9.
The area between the curves, or the area bounded by the curves, y = x² + 10x and y = 2x + 9 is 58/3 square units.
To find the area between two curves, we need to determine the points of intersection and integrate the difference between the curves over the given interval.
First, let's find the points of intersection by setting the two equations equal to each other:
x² + 10x = 2x + 9
Rearranging the equation, we get:
x² + 8x - 9 = 0
Now we can solve this quadratic equation. Using the quadratic formula, we have:
x = (-8 ± √(8² - 4(-9)))/(2)
Simplifying further, we get:
x = (-8 ± √(100))/(2)
x = (-8 ± 10)/(2)
So we have two possible solutions for x:
x₁ = 1 and x₂ = -9
Now we can integrate the difference between the curves over the interval from x = -9 to x = 1. The area between the curves is given by:
Area = ∫[a,b] (f(x) - g(x)) dx
where f(x) is the upper curve and g(x) is the lower curve.
Using the given curves, we have:
f(x) = 2x + 9
g(x) = x² + 10x
Now we can integrate:
Area = ∫[-9,1] (2x + 9 - (x² + 10x)) dx
Simplifying:
Area = ∫[-9,1] (-x² - 8x + 9) dx
To find the exact value of the area, we need to evaluate this integral. Integrating term by term, we have:
Area = (-1/3)x³ - 4x² + 9x |[-9,1]
Evaluating this expression at the limits of integration:
Area = [(-1/3)(1)³ - 4(1)² + 9(1)] - [(-1/3)(-9)³ - 4(-9)² + 9(-9)]
Area = (-1/3 - 4 + 9) - (-243/3 + 324 - 81)
Area = (4/3) - (-54/3)
Area = (4 + 54)/3
Area = 58/3
Learn more about area:
https://brainly.com/question/25292087
#SPJ11
Find yxdydx and 2yx2d2ydx2 at the given point without
eliminating the parameter.
x=133+3x=13t3+3, y=155+4y=15t5+4t, =2t=2.
Find yx=dydx=
To find y'x = dy/dx, we need to differentiate y with respect to x using the chain rule: y'x ≈ 7.7179.
Given: x = 13t^3 + 3 and y = 15t^5 + 4t
Differentiating y with respect to t:
[tex]dy/dt = 75t^4 + 4[/tex]
Now, we differentiate x with respect to t:
[tex]dx/dt = 39t^2[/tex]
Applying the chain rule:
[tex]y'x = (dy/dt) / (dx/dt)= (75t^4 + 4) / (39t^2)[/tex]
To find the value of y'x at t = 2, we substitute t = 2 into the expression:
[tex]y'x = (75(2^4) + 4) / (39(2^2))[/tex]
= (1200 + 4) / (156)
= 1204 / 156
= 7.7179 (rounded to 4 decimal places)
Therefore, y'x ≈ 7.7179.
Note: It seems there was a typo in the given information, as there are two equal signs (=) instead of one in the equations for x and y. Please double-check the equations to ensure accuracy.
To know more about chain rule click the link below:
brainly.com/question/31402308
#SPJ11
Find the average value of the function over the given rectangle. х f(x, y)=-; R = {(x, y) - 15x54, 2sys 6} x, | } The average value is ... (Round to two decimal places as needed.)
To find the average value of the function f(x, y) over the given rectangle R = {(x, y) : 1 ≤ x ≤ 5, 2 ≤ y ≤ 6}, we need to compute the double integral of f(x, y) over the rectangle R and divide it by the area of the rectangle.
Answer : the average value of the function f(x, y) over the given rectangle R is -9.
The average value is given by the formula:
Average value = (1 / Area of R) * ∬R f(x, y) dA
First, let's compute the double integral of f(x, y) over the rectangle R:
∬R f(x, y) dA = ∫[2,6]∫[1,5] (-xy) dx dy
Integrating with respect to x first:
∫[2,6] -∫[1,5] xy dx dy
= -∫[2,6] [(1/2)x^2]∣[1,5] dy
= -∫[2,6] (25/2 - 1/2) dy
= -(12)(25/2 - 1/2)
= -12(12)
= -144
The area of the rectangle R is given by the product of the lengths of its sides:
Area of R = (5 - 1)(6 - 2)
= 4 * 4
= 16
Now, we can compute the average value:
Average value = (1 / Area of R) * ∬R f(x, y) dA
= (1 / 16) * (-144)
= -9
Therefore, the average value of the function f(x, y) over the given rectangle R is -9.
Learn more about average : brainly.com/question/24057012
#SPJ11
The amount of trash, in tons per year, produced by a town has been growing linearly, and is projected to continue growing according to the formula P(t)=61+3tP(t)=61+3t. Estimate the total trash that will be produced over the next 6 years by interpreting the integral as an area under the curve.
The estimated total trash production over the next 6 years is approximately 420 tons.
To estimate the total trash produced over the next 6 years, we can interpret the integral of the function P(t) = 61 + 3t as the area under the curve. The integral of the function represents the accumulated trash production over time.
Integrating P(t) with respect to t gives us:
∫(61 + 3t) dt = 61t + [tex](3/2)t^2[/tex] + C
To find the total trash produced over a specific time interval, we need to evaluate the integral from the starting time to the ending time. In this case, we want to find the trash produced over the next 6 years, so we evaluate the integral from t = 0 to t = 6:
∫(61 + 3t) dt = [61t + [tex](3/2)t^2[/tex]] from 0 to 6
= [tex](61*6 + (3/2)*6^2) - (61*0 + (3/2)*0^2)[/tex]
= (366 + 54) - 0
= 420 tons
Therefore, the estimated total trash produced over the next 6 years is approximately 420 tons.
To learn more about integral refer:-
https://brainly.com/question/31433890
#SPJ11
If n - 200 and X = 60, construct a 95% confidence interval estimate of the population proportion.
the 95% confidence interval estimate of the population proportion, given X = 60 and n - 200, is approximately 0.3 ± 0.0634.
To construct a confidence interval estimate of the population proportion, we use the formula: X ± Z sqrt((X/n)(1-X/n)).
Given X = 60 and n - 200, we have the sample size and the number of successes. The sample proportion is X/n = 60/200 = 0.3.
To determine the critical value Z for a 95% confidence level, we refer to the standard normal distribution table. For a 95% confidence level, the critical value corresponds to a cumulative probability of 0.975 in each tail, which is approximately 1.96.
Substituting the values into the formula, we have:
0.3 ± 1.96 sqrt((0.3(1-0.3))/200)
Calculating the expression within the square root, we get:
0.3 ± 1.96 sqrt(0.21/200)
Simplifying further, we have:
0.3 ± 1.96 sqrt(0.00105)
The confidence interval estimate is:
0.3 ± 1.96 × 0.0324
This yields the 95% confidence interval estimate for the population proportion.
In conclusion, the 95% confidence interval estimate of the population proportion, given X = 60 and n - 200, is approximately 0.3 ± 0.0634.
Learn more about confidence interval here:
https://brainly.com/question/32546207
#SPJ11
I
need it ASAP please
Find a fundamental set of solutions of the given equation. (D+5)(D2 – 6D + 25)y = 0
The fundamental set of solutions of the equation (D + 5)(D2 - 6D + 25)y = 0 is :
y1 = e^(-5x),
y2 = e^(3x)cos4x, and
y3 = e^(3x)sin4x.
The given equation is (D + 5)(D2 - 6D + 25)y = 0.
The characteristic equation is given as:
(D + 5)(D2 - 6D + 25) = 0.
D = -5, (6 ± √(- 4)(25)) / 2 = 3 ± 4i.
The roots are :
-5, 3 + 4i, and 3 - 4i.
Since the roots are distinct and complex, we can express the fundamental set of solutions as :
y1 = e^(-5x),
y2 = e^(3x)cos4x, and
y3 = e^(3x)sin4x.
Thus, the fundamental set of solutions of the given equation is y1 = e^(-5x), y2 = e^(3x)cos4x, and y3 = e^(3x)sin4x.
To learn more about characteristic equation visit : https://brainly.com/question/18406313
#SPJ11
Find an equation for the set of points in an xy-plane that are equidistant from the point P and the line l. P(−9, 2); l: x = −3
The equation for the set of points equidistant from the point P(-9, 2) and the line l: x = -3 is[tex](x + 3)^2 + (y - 2)^2 = 121.[/tex]
To find the equation for the set of points equidistant from a point and a line, we first consider the distance formula. The distance between a point (x, y) and the point P(-9, 2) is given by the distance formula as sqrt([tex](x - (-9))^2 + (y - 2)^2).[/tex]
Next, we consider the distance between a point (x, y) and the line l: x = -3. Since the line is vertical and parallel to the y-axis, the distance between any point on the line and a point (x, y) is simply the horizontal distance, which is given by |x - (-3)| = |x + 3|.
For the set of points equidistant from P and the line l, the distances to P and the line l are equal. Therefore, we equate the two distance expressions and solve for x and y:
sqrt([tex](x - (-9))^2 + (y - 2)^2) = |x + 3|[/tex]
Squaring both sides to eliminate the square root and simplifying, we get:
[tex](x + 3)^2 + (y - 2)^2 = (x + 3)^2[/tex]
Further simplification leads to:
(y - 2)^2 = 0
Hence, the equation for the set of points equidistant from P and the line l is [tex](x + 3)^2 + (y - 2)^2 = 121.[/tex]
Learn more about square root here:
https://brainly.com/question/29286039
#SPJ11
Find the Laplace transform is applied to the problem y" +2y' +y =p3t, y(0) = 1, y'(0)=2 Find the solution of the initial value problem in the previous problem.
We begin by applying the Laplace transform to both sides of the given differential equation in order to solve the initial value problem using the Laplace transform.
sY(s) - y(0) stands for the Laplace transform of the first derivative of y'(t), where Y(s) is the Laplace transform of y(t) and y(0) is y(t)'s initial condition at time t=0.
The second derivative's Laplace transform is represented similarly as s2Y(s) - sy(0) - y'(0).
When the Laplace transform is used to solve the provided differential equation, we obtain:
[tex]s2Y(s) - sy(0) - y'(0) plus 2(sY(s) - y(0)) + Y(s) = Lp3t[/tex]
By condensing the equation, we obtain:
(s^2 + 2s + 1)Y(s) - s - 2 + 2/s + 1 = 3/s^4
We can now determine Y(s) by isolating it:
learn more about Laplace here :
https://brainly.com/question/13721584
#SPJ11
what is the FUNDAMENTAL THEOREM OF CALCULUS applications? How
it's related to calculus?
The Fundamental Theorem of Calculus is a fundamental result in calculus that establishes a connection between differentiation and integration. It has various applications in calculus, including evaluating definite integrals, finding antiderivatives, and solving problems involving rates of change and accumulation.
The Fundamental Theorem of Calculus consists of two parts: the first part relates differentiation and integration, stating that if a function f(x) is continuous on a closed interval [a, b] and F(x) is its antiderivative, then the definite integral of f(x) from a to b is equal to F(b) - F(a). This allows us to evaluate definite integrals using antiderivatives. The second part of the theorem deals with finding antiderivatives. It states that if a function f(x) is continuous on an interval I, then its antiderivative F(x) exists and can be found by integrating f(x). The Fundamental Theorem of Calculus has numerous applications in calculus. It provides a powerful tool for evaluating definite integrals, calculating areas under curves, determining net change and accumulation, solving differential equations, and more.
To know more about Fundamental Theorem here: brainly.com/question/30761130
#SPJ11
A company has a plant in Miami and a plant in Baltimore. The firm is committed to produce a total of 394 units of a product each week. The total weekly cost is given by C(x,y)=x2+(1/5)y2+46x+54y+800, where x is the number of units produced in Miami and y is the number of units produced in Baltimore. How many units should be produced in each plant to minimize the total weekly cost?
To minimize the total weekly cost, the company should produce 23 units in Miami and 135 units in Baltimore.
To minimize the total weekly cost function C(x, y) = x^2 + (1/5)y^2 + 46x + 54y + 800, we need to find the values of x and y that minimize this function.
We can solve this problem using calculus. First, we calculate the partial derivatives of C(x, y) with respect to x and y:
∂C/∂x = 2x + 46
∂C/∂y = (2/5)y + 54
Next, we set these partial derivatives equal to zero and solve for x and y:
2x + 46 = 0 (equation 1)
(2/5)y + 54 = 0 (equation 2)
Solving equation 1 for x:
2x = -46
x = -23
Solving equation 2 for y:
(2/5)y = -54
y = -135
So, according to the partial derivatives, the critical point occurs at (x, y) = (-23, -135).
To determine if this critical point corresponds to a minimum, we need to calculate the second partial derivatives of C(x, y):
∂^2C/∂x^2 = 2
∂^2C/∂y^2 = 2/5
The determinant of the Hessian matrix is:
D = (∂^2C/∂x^2)(∂^2C/∂y^2) - (∂^2C/∂x∂y)^2 = (2)(2/5) - 0 = 4/5 > 0
Since the determinant is positive, we can conclude that the critical point (x, y) = (-23, -135) corresponds to a minimum.
Therefore, 23 units in Miami and 135 units in Baltimore should be produced to minimize the total weekly cost.
To learn more about cost, refer below:
https://brainly.com/question/14566816
#SPJ11
solve the system dx/dt = [6,-2;20,-6]x with x(0) = [-2;2] give your solution in real form x1 = x2 = and describe the trajectory
In this case, since the eigenvalue λ2 = 4 is positive, the solution decays exponentially towards the origin along the line defined by the eigenvector [1; 1].
To solve the system dx/dt = [6, -2; 20, -6]x with x(0) = [-2; 2], we can find the eigenvalues and eigenvectors of the coefficient matrix [6, -2; 20, -6]. Let's denote the coefficient matrix as A.
The characteristic equation of A is given by det(A - λI) = 0, where λ is the eigenvalue and I is the identity matrix. So we have:
|6 - λ, -2|
|20, -6 - λ| = 0
Expanding the determinant, we get:
(6 - λ)(-6 - λ) - (-2)(20) = 0
(λ - 2)(λ - 4) = 0
Solving for λ, we find two eigenvalues: λ1 = 2 and λ2 = 4.
To find the corresponding eigenvectors, we substitute each eigenvalue back into the equation (A - λI)v = 0 and solve for v. Let's find the eigenvectors for each eigenvalue.
For λ1 = 2:
(A - 2I)v1 = 0
|4, -2|v1 = 0
|20, -8|v1 = 0
Simplifying, we get the equation 4v1 - 2v2 = 0, which gives us v1 = v2.
For λ2 = 4:
(A - 4I)v2 = 0
|2, -2|v2 = 0
|20, -10|v2 = 0
Simplifying, we get the equation 2v1 - 2v2 = 0, which gives us v1 = v2.
So, the eigenvectors for both eigenvalues are v = [1; 1].
Now we can express the general solution of the system as:
x(t) = c1 * e^(λ1 * t) * v1 + c2 * e^(λ2 * t) * v2
Substituting the values, we have:
x(t) = c1 * e^(2t) * [1; 1] + c2 * e^(4t) * [1; 1]
Since x(0) = [-2; 2], we can solve for the constants c1 and c2. Plugging t = 0 into the equation, we get:
[-2; 2] = c1 * e^0 * [1; 1] + c2 * e^0 * [1; 1]
[-2; 2] = c1 * [1; 1] + c2 * [1; 1]
[-2; 2] = [c1 + c2; c1 + c2]
From the first component of the vector equation, we have -2 = c1 + c2.
From the second component of the vector equation, we have 2 = c1 + c2.
Solving these equations, we find c1 = 0 and c2 = -2.
Therefore, the particular solution to the system dx/dt = [6, -2; 20, -6]x with x(0) = [-2; 2] is:
x(t) = -2 * e^(4t) * [1; 1]
The trajectory of the solution represents a line in the direction of the eigenvector [1; 1], with exponential growth/decay based on the eigenvalues.
To know more about eigenvalue visit:
brainly.com/question/14415841
#SPJ11
Find and simplify the derivative of the following function. f(x)=2x4 (3x² - 1) - The derivative of f(x) = 2x4 (3x² - 1) is - (Type an exact answer.)
The derivative of[tex]f(x) = 2x^4 (3x^2 - 1) is 72x^5 - 8x^3.[/tex]
Start with the function [tex]f(x) = 2x^4 (3x^2 - 1).[/tex]
Apply the product rule to differentiate the function.
Using the product rule, differentiate the first term[tex]2x^4 as 8x^3[/tex] and keep the second term ([tex]3x^2 - 1[/tex]) as it is.
Next, keep the first term [tex]2x^4[/tex]as it is and differentiate the second term [tex](3x^2 - 1)[/tex] using the power rule, resulting in 6x^2.
Combine the differentiated terms to obtain the derivative: [tex]8x^3 * (3x^2 - 1) + 2x^4 * 6x^2.[/tex]
Simplify the expression:[tex]24x^5 - 8x^3 + 12x^6.[/tex]
The simplified derivative of f(x) is [tex]72x^5 - 8x^3.[/tex]
learn more about :-derivatives here
https://brainly.com/question/29020856
#SPJ11
Solve the following system of equations using matrices (row operations). If the system has no solution, say that it is inconsistent 2x - 3y - 5z = 2 6x + 10y +422 = 0 - 2x + 2y + 2z=1
To solve the system of equations 2x - 3y - 5z = 2, 6x + 10y + 422 = 0, and -2x + 2y + 2z = 1 using matrices and row operations, we represent the system augmented matrix form and perform row operations to simplify.
Let's represent the system of equations in augmented matrix form:
| 2 -3 -5 | 2 |
| 6 10 422 | 0 |
| -2 2 2 | 1 |
Using row operations, we can simplify the matrix to bring it to row-echelon form. By performing operations such as multiplying rows by constants, adding or subtracting rows, and swapping rows, we aim to isolate the variables and find a solution.
After performing the row operations, we reach the row-echelon form:
| 1 -1.5 -2.5 | 1 |
| 0 0 424 | -6 |
| 0 0 0 | 0 |
In the final row of the matrix, we have all zeroes in the coefficient column but a non-zero value in the constant column. This indicates an inconsistency in the system of equations. Therefore, the system has no solution and is inconsistent.
To learn more about augmented matrix click here :
brainly.com/question/30403694
#SPJ11
After dinner, 2/3 of the cornbread is left. Suppose 4 friends want to share it equally
Answer:
Step-by-step explanation:
If 2/3 of the cornbread is left after dinner and 4 friends want to share it equally, we need to determine how much cornbread each friend will receive.
To find the amount of cornbread each friend will receive, we need to divide the remaining cornbread by the number of friends.
Let's assume the total amount of cornbread is represented by "C".
The remaining cornbread is 2/3 of the total:
Remaining cornbread = (2/3) * C
Since there are 4 friends, we divide the remaining cornbread by 4 to find the amount each friend will receive:
Amount per friend = Remaining cornbread / Number of friends
= [(2/3) * C] / 4
To divide by a fraction, we can multiply by its reciprocal:
Amount per friend = [(2/3) * C] * (1/4)
= (2/3) * (1/4) * C
= (2/12) * C
= (1/6) * C
Therefore, each friend will receive 1/6 of the total amount of cornbread.
Note: Without the specific value of "C" representing the total amount of cornbread, we cannot determine the exact quantity each friend will receive.
find a polynomial function f(x) of least degree having only real coefficients and zeros as given. assume multiplicity 1 unless otherwise stated.
a polynomial function f(x) of least degree with real coefficients and the given zeros (1 with multiplicity 1, 2 with multiplicity 2, and i) is:
f(x) = x^5 - 5x^4 + 9x^3 - 8x^2 + 4x - 4.
To find a polynomial function f(x) of the least degree with real coefficients and given zeros, we can use the fact that if a is a zero of a polynomial with real coefficients, then its conjugate, denoted by a-bar, is also a zero.
Let's consider an example with given zeros:
Zeros:
1 (multiplicity 1)
2 (multiplicity 2)
i (complex zero)
Since we want a polynomial with real coefficients, we need to include the conjugate of the complex zero i, which is -i.
To obtain a polynomial function with the given zeros, we can write it in factored form as follows:
f(x) = (x - 1)(x - 2)(x - 2)(x - i)(x + i)
Now we simplify this expression:
f(x) = (x - 1)(x - 2)^2(x^2 - i^2)
Since i^2 = -1, we can simplify further:
f(x) = (x - 1)(x - 2)^2(x^2 + 1)
Expanding this expression:
f(x) = (x - 1)(x^2 - 4x + 4)(x^2 + 1)
Multiplying and combining like terms:
f(x) = (x^3 - 4x^2 + 4x - x^2 + 4x - 4)(x^2 + 1)
Simplifying:
f(x) = (x^3 - 5x^2 + 8x - 4)(x^2 + 1)
Expanding again:
f(x) = x^5 - 5x^4 + 8x^3 - 4x^2 + x^3 - 5x^2 + 8x - 4x + x^2 - 4
Combining like terms:
f(x) = x^5 - 5x^4 + 9x^3 - 8x^2 + 4x - 4
to know more about polynomial visit:
brainly.com/question/11536910
#SPJ11
Find the following antiderivative:
∫2x2(−x3+3)5 dx
Find the following antiderivative: | 22 2xP(-x3 + 3) dx -X * Do not include the constant "+C" in your answer. For example, if you found the antiderivative was 2x + C, you would enter 2x.
The antiderivative of the given integral ∫2x² (-x³+3)^5 dx is (-x³+3)^6/27.
To solve for the antiderivative of the given integral, we can use the following:
Step 1: Rewrite the given integral in the following form: ∫(u^n) du
Step 2: Integrate u^(n+1)/(n+1) and replace u by the given function in step 1.
The detailed writeup of the steps mentioned are as follows:
Step 1: Let u = (-x³+3).
Then, du/dx = -3x² or dx = -du/3x²
Thus, the given integral can be written as:
∫2x² (-x³+3)^5 dx= -2/3 ∫(u)^5 (-1/3x²) du
= -2/3 ∫u^5 (-1/3) du
= 2/9 ∫u^5 du
= 2/9 [(u^6)/6]
= u^6/27
= (-x^3+3)^6/27
Step 2: Replace u with (-x³+3)^5 in the result obtained in step 1
= [(-x³+3)^6/27] + C
Thus, the antiderivative of the given integral is (-x³+3)^6/27 + C
As the constant of integration is to be omitted out, the antiderivative of the given integral is (-x³+3)^6/27.
To know more about antiderivatives, visit the link : https://brainly.com/question/21627352
#SPJ11