147 grams of argon to liters

We just use molar mass for FeF3 (129.9 g/mol) to calculate the number  moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.

An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.

55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3

0.207 moles×6.022×23molecules/mole=1.2×1023molecules

A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.

To know more about mass  visit:

https://brainly.com/question/15959704

#SPJ1

The Fe(OH)₃ solution has a content of 0.304 M.

In this titration, HNO₃ is the acid and Fe(OH)₃ is the base. At the equivalence point, all the H+ ions from the HNO₃ react with all the OH- ions from the Fe(OH)₃ to form water and the salt, Fe(NO₃)₃. We can use the balanced chemical equation for the reaction to determine the stoichiometric ratio of HNO₃ to Fe(OH)₃ and calculate the molarity of Fe(OH)₃.

The balanced chemical equation for the reaction is:

HNO₃ + 3Fe(OH)₃ → Fe(NO₃)₃ + 3H₂O

From the equation, we see that 1 mole of HNO₃ reacts with 3 moles of Fe(OH)₃. Therefore, the number of moles of HNO₃ in the solution can be calculated as:

moles of HNO₃ = Molarity of HNO₃ x Volume of HNO₃ solution in liters

moles of HNO₃ = 0.524 M x (49.2 mL / 1000 mL/L)

moles of HNO₃ = 0.0258 mol

At the equivalence point, the number of moles of Fe(OH)₃ added is equal to the number of moles of HNO₃ in the solution. Therefore, we can calculate the molarity of Fe(OH)₃ as:

Molarity of Fe(OH)₃ = moles of Fe(OH)₃ added / Volume of Fe(OH)₃ solution in liters

Since the volume of the Fe(OH)₃ solution added is 85 mL, or 0.085 L, we can calculate the moles of Fe(OH)₃ as:

moles of Fe(OH)₃ = moles of HNO₃ = 0.0258 mol

Therefore, the molarity of Fe(OH)₃ is

Molarity of Fe(OH)₃ = 0.0258 mol / 0.085 L

Molarity of Fe(OH)₃ = 0.304 M

Thus, the concentration (molarity) of the Fe(OH)₃ solution is 0.304 M, rounded to two decimal places.

To learn more about concentration refer to:

brainly.com/question/10725862

#SPJ4

The longest wavelength of light capable of breaking a single I-I bond is approximately 787 nm (nanometers).

Energy is considered a quantitative property that can be transferred from an object to perform work.

The energy required to break a mole of I2 molecules is 151 kJ/mol. We can use this information to calculate the energy required to break a single I-I bond:

Energy required to break a single I-I bond = Energy required to break one mole of I2 molecules / Avogadro's number

Energy required to break a single I-I bond = 151 kJ/mol / 6.022 x 10^23 molecules/mol

Energy required to break a single I-I bond = 2.51 x 10^-19 J/bond

To calculate the longest wavelength of light capable of breaking a single I-I bond, we can use the equation:

E = hc/λ

Where

We want to find the wavelength of light that has an energy of 2.51 x 10^-19 J, so we can rearrange the equation as follows:

λ = hc/E

λ = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (2.51 x 10^-19 J)

λ = 7.87 x 10^-7 m

Therefore, the longest wavelength of light capable of breaking a single I-I bond is approximately 787 nm (nanometers).

Learn more about energy here : brainly.com/question/582060

#SPJ1

1) You know the number of moles, you can easily work out the molar mass of Ti(SO3)2 (titanium sulfite), but you don't know the actual mass

2) By adding the mass of the atoms that make up titanium sulfite, you should get something like 207.9934 g/mol

3) To find the actual mass, you times the molar mass and the moles together

Final Answer = 193g

To calculate the Gibbs free energy change (ΔG_rxn) for the reaction at -73°C under the given standard conditions at equilibrium and pH 2, we would need the specific reaction equation, as well as the standard free energy change (ΔG°) and equilibrium constant (K) for that reaction.

Once we have those, we can use the equation ΔG_rxn = ΔG° + RTlnQ, where R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient. However, without the specific reaction details, we cannot calculate ΔG_rxn.

To further elaborate, the Gibbs free energy change (ΔG_rxn) is a measure of the spontaneity of a chemical reaction, and it can tell us whether a reaction will occur spontaneously or not.

The ΔG_rxn can be calculated using the equation ΔG_rxn = ΔG° + RTlnQ, where ΔG° is the standard free energy change of the reaction at standard conditions (usually 298 K and 1 atm), R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and Q is the reaction quotient.

The reaction quotient (Q) is the ratio of the concentrations of the products to the concentrations of the reactants at any given point in the reaction. Under standard conditions, the reaction is at equilibrium, and the reaction quotient (Q) equals the equilibrium constant (K).

If Q < K, then the reaction will proceed spontaneously in the forward direction to reach equilibrium, and ΔG_rxn will be negative.

If Q > K, then the reaction will proceed spontaneously in the reverse direction to reach equilibrium, and ΔG_rxn will be positive. If Q = K, then the reaction is at equilibrium, and ΔG_rxn will be zero.

However, to calculate the Gibbs free energy change (ΔG_rxn) for a specific reaction, we need to know the specific reaction equation, as well as the standard free energy change (ΔG°) and equilibrium constant (K) for that reaction.

These values can be experimentally determined or obtained from reference tables. Therefore, without the specific reaction details, we cannot calculate ΔG_rxn.

To learn more about equilibrium, refer below:

https://brainly.com/question/30807709

#SPJ11

The difference between the free-energy content of the reactants and the free-energy content of the products is also referred to as the free energy change (or ΔG).

The Gibbs free energy (G) is a state function that provides information about the spontaneity of a chemical reaction at a specified temperature, pressure, and concentration. It's also known as Gibbs energy or Gibbs function.It is the energy required to convert a substance from one form to another in a constant temperature and pressure environment.

Gibbs free energy indicates the maximum amount of work that a thermodynamic system can do on its surroundings during an isothermal, isobaric process. The Gibbs free energy change (ΔG) is determined by the difference between the free-energy content of the reactants and the free-energy content of the products, as you mentioned in your question.

Read more about the energy:

https://brainly.com/question/13881533

#SPJ11

The correct reduction half-reaction for the given chemical equation (Zn(s) + CuSO₄(aq) → Cu(s) + ZnSO₄(aq)) is:

Cu²⁺(aq) + 2e⁻ → Cu(s)

1. First, let's identify the species that are changing their oxidation states in the reaction. It's zinc (Zn) and copper (Cu).

2. Zn is undergoing oxidation, as it is losing electrons and forming Zn²⁺ in ZnSO₄. Cu²⁺ from CuSO₄ is gaining electrons and forming elemental copper (Cu).

3. Now, we'll focus on the copper half-reaction to find the reduction half-reaction. Reduction is the process of gaining electrons, so we need to identify the half-reaction where Cu²⁺ gains electrons.

4. The given reduction half-reaction is Cu²⁺(aq) + 2e⁻ → Cu(s), which represents the process where Cu²⁺ ions from the copper sulfate solution gain two electrons to form solid copper.

5. To confirm this, we can check the other options provided:

a. Ag⁺(aq) + Cl⁻(aq) → AgCl(s) - This is a precipitation reaction

b. Fe²⁺(aq) → Fe³⁺(aq) + e⁻ - This is an oxidation half-reaction involving iron

c. HF(aq) + OH⁻(aq) → H₂O(l) + F⁻(aq) - This is an acid-base neutralization reaction

So, the correct reduction half-reaction for the given chemical equation is Cu²⁺(aq) + 2e⁻ → Cu(s).

to know more about half-reaction refer here:

https://brainly.com/question/13109589#

#SPJ11

The highest energy of activation in the SN1 mechanism for the substitution reaction of (CH3)3COH with HX is nucleophilic capture of the carbocation.

During this step, a nucleophile (such as HX) attacks the positive charge on the carbocation, forming a new bond and breaking an existing bond.

This transition state has a higher energy of activation than the other steps in the reaction because it requires the greatest reorganization of the electron density.

Protonation of the alcohol has the second highest energy of activation. This step involves the nucleophile donating a proton to the alcohol, forming an oxonium ion.

This step requires an intermediate and is energetically favorable because the oxygen lone pair donates electron density to the carbon, stabilizing the charge.

Finally, the loss of H2O to form the intermediate carbocation is the lowest energy of activation. This step involves breaking the bond between the oxygen and the hydrogen, releasing water in the process.

This is energetically favorable because the carbocation is more stable than the alcohol.

In conclusion, the highest energy of activation in the SN1 mechanism for the substitution reaction of (CH3)3COH with HX is nucleophilic capture of the carbocation.

to know more about carbocation refer here:

https://brainly.com/question/19168427#

#SPJ11

Answer:

Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.

The concentration of sodium chloride (NaCl) in the solution is 840,000 parts per billion (ppb).

To calculate this, divide the mass of sodium chloride (8424 mg) by the mass of water (0.1711 kg), then multiply the result by 1 billion (10^9).

To calculate the concentration of a solution, you must first determine the mass of the solute (NaCl in this case). The mass of the solute is given in the question as 8424 mg.

The mass of the solvent (water) is given as 0.1711 kg.

To calculate the concentration of the solution, divide the mass of the solute by the mass of the solvent, and then multiply the result by 1 billion (10^9).

In this example, 8424 mg divided by 0.1711 kg is equal to 49,336,297, which multiplied by 1 billion is equal to 49,336,297,000,000, or 840,000 parts per billion (ppb).

To know more about parts per billion click on below link:

https://brainly.com/question/13251096#

#SPJ11

Answer: the answer is 15.009

Explanation:

Therefore, the mass of silver sulfide formed when 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate is 2.238 g.

When 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate, the reaction forms solid silver sulfide. The equation for this reaction is:

H₂S + 2 AgNO₃ → Ag₂S + 2 HNO₃.

To calculate the mass of silver sulfide formed, we need to use the mole ratio of the two reactants. We know that the molecular weight of silver nitrate is 169.88 g/mol and the molecular weight of hydrosulfuric acid is 34.08 g/mol.

Using the mole ratio, we can find the moles of each reactant:

9.48 g/34.08 g/mol = 0.2786 moles of H₂S and 6.35 g/169.88 g/mol = 0.0373 moles of AgNO₃.

Since the reaction forms 1 mole of Ag₂S for every 2 moles of AgNO3, we can calculate the moles of Ag₂S formed: (0.0373 moles of AgNO₃ x 1 mole of Ag₂S)/2 moles of AgNO₃ = 0.01865 moles of AgS.

Now, using the molecular weight of silver sulfide (119.97 g/mol), we can calculate the mass of silver sulfide formed: 0.01865 moles of Ag₂S x 119.97 g/mol = 2.238 g of Ag₂S.

Therefore, the mass of silver sulfide formed when 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate is 2.238 g.

To know more about silver sulfide, refer here:

https://brainly.com/question/14751616#

#SPJ11

2 Sodium azide(s) 2 Sodium(s) + 3 Nitrogen(g) is the balanced chemical equation for the breakdown of sodium azide (Sodium azide). As a result, 13.65 moles of Nitrogen gas will be created from 9.1 mol of Sodium azide.

According to Avogadro's law, a gas's total number of atoms or molecules is directly proportional to the volume of gas that gas occupies at a given pressure and temperature. The formula for Avogardro's equation is V = k n or V1/n1 = V2/n2.

We can use the following ratio to determine how many moles of Nitrogen gas are created by the breakdown of 9.1 mol of Sodium azide:

2 mol Sodium azide / 3 mol Nitrogen = 9.1 mol Sodium azide/ x mol Nitrogen

where x represents the quantity of Nitrogen generated in moles.

After finding x, we obtain:

x = 9.1 mol Sodium azide × 3 mol Nitrogen / 2 mol Sodium azide

x = 13.65 mol Nitrogen

To know more about Avogadro's law visit:-

https://brainly.com/question/4133756

#SPJ9

In order for a six-membered ring to undergo an E2 reaction, the substituents that are to be eliminated axially must both be in equatorial positions.

This is because when bromine and an adjacent hydrogen are both in axial positions, the large tent-butyl substituent is in a cis position in the trans isomer.

Because a large substituent is more stable in a cis position than in an axial position, elimination of the trans isomer occurs through its more stable chair conformer, while elimination of the cis isomer has to occur through its less stable chair conformer. The cis isomer, therefore, reacts more rapidly in an E2 reaction.

because the more stable conformer has to be destabilized in order for the reaction to proceed. As a result, the reaction rate is much higher for the trans isomer than for the cis isomer.

Know more about equatorial here

https://brainly.com/question/24168112#

#SPJ11

As long as the same amount of chemicals and the same reaction conditions are used, the reaction should proceed in the same way, resulting in the same products and reactions.

Therefore, repeating the experiment using the same chemicals and conditions should yield similar results without the need to remix the chemicals. This is possible because chemical reactions follow the law of conservation of mass, which states that matter cannot be created or destroyed, only rearranged.

What is law of conservation?

The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system (in a chemical reaction or physical change) remains constant, regardless of the processes or transformations that occur within the system. In other words, matter cannot be created or destroyed, only transformed or rearranged in a chemical reaction or physical change. This law is a fundamental principle of chemistry and is widely used in chemical calculations and experiments.

To know more about chemicals, visit:

https://brainly.com/question/30970962

#SPJ1

The VSEPR (Valence Shell Electron Pair Repulsion) theory is used to predict the shapes of molecules based on the arrangement of electron pairs around the central atom.

The VSEPR theory assigns a numerical value, called the "VSEPR number", to each central atom in a molecule.

The first digit of the VSEPR number corresponds to the number of electron pairs around the central atom that are involved in bonding. Specifically:

The first digit of the VSEPR number is used to determine the general electron pair geometry around the central atom, which is a crucial factor in determining the molecular geometry of the molecule.

Learn more about VSEPR,

https://brainly.com/question/29756299

#SPJ4

The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.

The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:

Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)

Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol

Volume (ml) = 2.922 ml

The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.

Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.

When these values are plugged into the equation, the resulting volume is 2.922 ml.

The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.

to know more about sucrose refer here:

https://brainly.com/question/29186350#

#SPJ11

The pH of the sodium hydroxide (NaOH) solution is 11.7.

Sodium hydroxide is a strong base and has a very high pH.

To calculate the pH of the solution, you must first calculate the molarity of the solution. To do this, divide the mass of sodium hydroxide by its molar mass, then divide that number by the volume of the solution.

Molarity = (0.40 g NaOH) / (40 g/mol) / (2.0 L) = 0.005 M = 5 x 10⁻³M.

The pH of a strong base is equal to its pOH plus 14. Since pOH is equal to -log[OH-], we can use the molarity of the solution to calculate the pH.

pOH = -log(5 x 10⁻³ M) = 2.30= 11.7

Therefore, the pH of the solution is equal to 14 - 2.30 = 11.7.

Therefore, 0.40 g of sodium hydroxide (NaOH) pellets dissolved in water will create a solution with a pH of 11.7.

To know more about pH, refer here:

https://brainly.com/question/491373#

#SPJ11

The moon stays in orbit around the Earth because of the gravitational force between them.

Despite the Sun having a much larger mass than the Earth and the Moon, the gravitational force between the Earth and the Moon is stronger due to their proximity. The gravitational force of the Earth on the Moon is what keeps it in orbit around the Earth.

This is because gravity is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between them. Although the Sun has a much larger mass than the Earth, it is also much farther away from the Moon, so the gravitational force it exerts on the Moon is much weaker than the gravitational force of the Earth on the Moon.

Therefore, it is the combination of the Moon's velocity and the gravitational force of the Earth that keeps it in orbit around the Earth, despite the much greater mass of the Sun.

Learn more about gravitational force here: https://brainly.com/question/27943482

#SPJ1

The partial pressure of O2 is 0.15 atm if the pco2 is 0. 70-atm and the pn2 is 0

we have a mixture of three gases: oxygen (O2), carbon dioxide (CO2), and nitrogen (N2).

We are given the total pressure of the mixture, which is 0.97 atm, as well as the partial pressures of CO2 and N2, which are 0.70 atm and 0.12 atm, respectively.

To find the partial pressure of O2, we need to subtract the partial pressures of CO2 and N2 from the total pressure.

Partial pressure of O2 = Total pressure - Partial pressure of CO2 - Partial pressure of N2

Partial pressure of O2 = 0.97 atm - 0.70 atm - 0.12 atm

Partial pressure of O2 = 0.15 atm

Therefore, the partial pressure of O2 is 0.15 atm.

To know more about pressure click here:

brainly.com/question/12971272

#SPJ4

The molarity of the first solution containing 0.500 mol of NaOH in 2.30 l of the solution is 0.217 M.

The molarity of a solution is defined as the number of moles of solute per liter of solution. In order to calculate the molarity of the given solution, we need to divide the number of moles of solute by the volume of the solution given in liters. Using the formula for molarity, we have;

Molarity = Number of moles of solute / Volume of solution in liters

Given, Number of moles of solute = 0.500 mol

Volume of solution = 2.30 L

Substitute the values of the given information into the molarity formula; Molarity = 0.500 mol / 2.30 L = 0.217 M

You can learn more about molarity at: brainly.com/question/16727614

#SPJ11

Thus, assuming there is reaction extra B, 3.60 mol of A will result in 9.00 moles  of Z.

According to the chemical equation, hydrogen gas is created when 1.0 mole of zinc combines with 1.0 mole of HCl. As a result, 3.0 moles of Zn react with 3.0 moles of hydrogen gas to form 3.0 moles of hydrogen gas.

The balanced chemical equation states that 2 moles of A and 3 moles of B combine to create 5 moles of Z.

The mole ratio of A to Z is therefore 2:5.

As a result, 3.60 moles of A will result in the following if 2 moles of A result in 5 moles of Z:

5 moles Z/2 moles A * 3.60 moles A = 9.00 moles of Z

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

The number of 20o atoms present in the given sample of 500 oxygen atoms is 301.

The weighted average is a measure of central tendency that takes into account the varying weights (or importance) of the different values in a data set. A weighted average is calculated by multiplying each value by its weight and dividing it by the sum of the weights. It is also referred to as a weighted mean or weighted arithmetic mean. The formula for the weighted average is,

weighted average = (w1x1 + w2x2 + w3x3 + … wn xn) / (w1 + w2 + w3 + … wn)

Where,x1, x2, x3, … xn are the values of the individual observations w1, w2, w3, … wn are the respective weights of the individual observations to solve the given problem. A sample of 500 oxygen atoms contains a mixture of 20o (20.0040754 amu) and 23o (23.01570 amu). The weighted average of oxygen atoms is 22.76272353 amu. We have to find how many 20o atoms are present in this sample.

Here,20o atoms have a mass of 20.0040754 amu23o atoms have a mass of 23.01570 amu

The average mass of 500 oxygen atoms is 22.76272353 amu. Therefore,

500 oxygen atoms weigh= 500 x 22.76272353 = 11381.36176 amu.

average atomic mass of oxygen = 20o atoms (20.0040754 amu) and 23o atoms (23.01570 amu)

Atomic mass of oxygen = [(number of 20o atoms x mass of 20o atoms) + (number of 23o atoms x mass of 23o atoms)] / Total number of oxygen atoms

Let's consider a number of 20o atoms to be ‘x’.Therefore, the number of 23o atoms = (500 - x). Substituting the given values in the above formula, we get,

22.76272353 = [(x x 20.0040754) + ((500 - x) x 23.01570)] / 50022.76272353 = (20.0040754x + 11507.825 - 23.01570x) / 50022.76272353 x 500 = 11507.825 - 3.0116246xx = 301.05 ≈ 301Number of 20o atoms = 301.

Hence, 301 number of 20o atoms are present in this sample.

You can learn more about oxygen atoms at: brainly.com/question/29695801

#SPJ11

Answer: During chemical weathering, sodium is released as dissolved ions and transported to the ocean, where it increases the salinity of the seawater.

Salinity is a measure of the amount of salt in seawater. The greater the salinity, the more salt there is in the water. The salinity of seawater is expressed in parts per thousand (ppt). There are about 35 ppt of salt in seawater.

Chemical weathering is the breakdown of rocks by chemical reactions, resulting in the formation of new minerals. Water is the most common medium for chemical weathering because it can dissolve many minerals. Carbon dioxide, oxygen, and organic acids are also involved in chemical weathering.

Sodium is a common element in minerals that are subject to chemical weathering. When rocks weather, sodium ions are released into the water. Rivers and streams transport these dissolved ions to the ocean, where they accumulate over time.

This is why seawater has a high concentration of sodium ions. Sodium is also introduced into seawater through underwater volcanoes and hydrothermal vents.

Sodium is important for many organisms that live in the ocean. It is an essential nutrient for marine animals, and it plays a role in regulating the body fluids of fish and other aquatic animals. Sodium is also important for maintaining the pH of seawater.

The concentration of sodium in seawater can also have an impact on ocean currents and the movement of water around the world.


Learn more about sodium here:

https://brainly.com/question/29327783#

#SPJ11

When a molecule is exposed to infrared radiation, the molecular change is c. a vibrational excitation.

Infrared radiation is a type of electromagnetic radiation that has a wavelength longer than visible light but shorter than microwaves. It is also known as heat radiation since it produces heat upon exposure to matter. Infrared radiation is used in various fields such as astronomy, meteorology, physics, and chemistry. It can detect celestial objects, measure temperature and atmospheric conditions, and identify molecular structures in chemistry.

Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule. The energy from the IR radiation is absorbed by the molecule's vibrational motion, leading to a change in the molecule's vibrational state.The absorbed energy causes the bonds in the molecule to stretch, contract, or bend. This energy can break the bonds, rearrange the atoms, or create new bonds, which leads to chemical changes in the molecule. Vibrational excitation is a common way to study molecular structure and function.

Summary, when a molecule is exposed to infrared radiation, it undergoes a vibrational excitation. Infrared radiation is a type of electromagnetic radiation that has a longer wavelength than visible light but shorter than microwaves. Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule.

Learn more about electromagnetic at:

https://brainly.com/question/29318543

#SPJ11

The statement, "all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption," is false.

Atomic absorption and atomic emission spectroscopy are two commonly employed techniques for the determination of elements present in a sample.

The advantage of atomic emission spectroscopy over atomic absorption spectroscopy, and vice versa, is dependent on the particular sample to be analyzed.

The principle of atomic absorption spectroscopy is that an atom in the gaseous state absorbs ultraviolet or visible radiation to move from the ground state to an excited state.

As a result, the intensity of the transmitted radiation decreases in proportion to the concentration of the absorbing species.

When a sample is analyzed, the sample is vaporized and the amount of absorption is measured at a specific wavelength.

The amount of radiation that is absorbed by the sample is directly proportional to the amount of the analyte present in the sample.

This information can then be used to estimate the analyte's concentration in the original sample.In atomic emission spectroscopy, the sample is excited by a high-energy source, causing the atoms to reach a higher energy state.

The atoms will eventually return to their ground state by releasing the excess energy, which is emitted as light.

The frequency and intensity of the light emitted is used to determine the concentration of the analyte present in the sample. This process is known as atomic emission spectroscopy.

Atomic absorption spectroscopy is superior in cases where the analyte concentration is low or the sample is a complex mixture,

whereas atomic emission spectroscopy is superior when high sensitivity is required or when the sample contains multiple elements.

Thus, it can be concluded that not all atoms can be easily detected by atomic emission, and that both methods have advantages and disadvantages.

to know more about emission refer here:

https://brainly.com/question/20388835#

#SPJ11

The value of Kp for the reaction at 690 K is 2.51 x 10-3.

At equilibrium, the total pressure in the flask is equal to the sum of the partial pressures of the reactants and products. Since the total pressure is given as 1.2 atm, the value of Kp can be calculated as follows:

Kp = (PH2*PI2)/PHI = (1.2 atm)/(PHI)

Where PH2, PI2 and PHI are the partial pressures of hydrogen gas, iodine gas and hydrogen iodide gas, respectively.

At equilibrium, the rate of forward reaction is equal to the rate of the reverse reaction. Hence, the value of Kp for the reaction at 690 K is equal to the equilibrium constant of the reaction at 690 K.

Kp = (2.51 x 10-3)690 K

Hence, the value of Kp for the reaction at 690 K is 2.51 x 10-3.

to know more about reaction refer here:

https://brainly.com/question/17434463#

#SPJ11

Boiling sugar to make caramel and using a large magnet to remove pieces of iron from a junkyard are two very different processes, but they have one thing in common: they both involve a physical change.

A physical change is a change in a substance that does not result in the formation of a new substance with different chemical properties. In other words, the substance does not undergo a chemical reaction, but rather a change in its physical properties.

Boiling sugar to make caramel is a physical change because the sugar undergoes a change in its physical properties, such as color, texture, and taste, without undergoing a chemical reaction. The sugar molecules are heated to the point where they break down and re-form into a new substance with new properties, but the chemical composition of the sugar remains the same.

Using a large magnet to remove pieces of iron from a junkyard is also a physical change because the magnet is not altering the chemical properties of the iron, but only its physical location. The magnet is attracting and removing the iron from the junkyard, but the iron itself is not undergoing a chemical reaction.

In both cases, the substances are undergoing a physical change, but their chemical properties remain unchanged.

Learn more about Boiling sugar ,

https://brainly.com/question/27984387

#SPJ4

Water molecules are attracted to each other and to ions due to the polarity of water molecules.

The separation of electric charge leading to a molecule having two poles, one positive and the other negative, is referred to as polarity. A polar molecule has a permanent dipole, whereas a nonpolar molecule does not. Water is an example of a polar molecule. The polarity of water is the reason why it is a good solvent and why it is attracted to other polar molecules and ions.

In water, the polar water molecules are pulled toward each other, forming hydrogen bonds. These hydrogen bonds give water its unique properties, such as high surface tension, capillary action, and high boiling and melting points. Ions are also attracted to water due to the polar nature of water molecules. Water molecules surround ions in a process known as hydration or solvation, which stabilizes the ions in solution.

As a result of the polarity of water, it is able to dissolve a wide range of ionic and polar substances, making it one of the most significant substances on the planet.

For more such questions on polarity, click on:

https://brainly.com/question/17118815

#SPJ11

The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.

A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.

While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.

For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.

Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.

Learn more about covalent bond here:

https://brainly.com/question/29630777

#SPJ1