17
17) Using your graphing calculator, find the following. Round accordingly. You only need to show your equation set-up. The growth of mosquitos during summer grows at M(t)=3900e 0.0819 1 mosquitos per

Answers

Answer 1

After 10 days, the total number of mosquitoes is approximately 0.285.

What is expression?

Mathematical statements are called expressions if they have at least two terms that are related by an operator and contain either numbers, variables, or both. Mathematical operations including addition, subtraction, multiplication, and division are all possible.

To find the total number of mosquitoes after 10 days, we need to evaluate the expression [tex]M(t) = 3900e^{(0.0819 - t)[/tex] at t = 10.

Plugging in t = 10 into the equation, we have:

[tex]M(10) = 3900e^{(0.0819 - 10)[/tex]

To simplify further, we can subtract 10 from 0.0819 inside the exponent:

[tex]M(10) = 3900e^{(-9.9181)[/tex]

Using a calculator or software, we can approximate the value of [tex]e^{(-9.9181)[/tex] as approximately[tex]7.31 * 10^{(-5)[/tex].

Now, we can calculate the total number of mosquitoes:

M(10) ≈ [tex]3900 * 7.31 * 10^{(-5)} = 0.285[/tex] mosquitoes (approximately)

Therefore, after 10 days, the total number of mosquitoes is approximately 0.285.

Learn more about expression on:

https://brainly.com/question/18189573

#SPJ4


Related Questions




(1 point) Solve the system 2 -1 dx 2:] U dt 4 6 with the initial value -1 X(0) = = 6 - 3e+ + 4 40 4( - bret ' + ${") ਨੂੰ x(t) = = 40 4t бе + 4te

Answers

The matrix form solution to the given system -1 X(0) = = 6 - 3e+ + 4 40 4( - bret ' + ${") ਨੂੰ x(t) = = 40 4t бе + 4te  is x(t) = 40e^(-4t) + 4te^(-4t).

To solve the system, we can use the method of integrating factors. We start by rewriting the system in matrix form:

dx/dt = 2x - y

dy/dt = 4x + 6y

Next, we find the determinant of the coefficient matrix:

D = (2)(6) - (-1)(4) = 12 + 4 = 16

Then, we find the inverse of the coefficient matrix:

[2/16, -(-1)/16] = [1/8, 1/16]

Multiplying the inverse matrix by the column vector [2, -1], we get:

[1/8, 1/16][2] = [1/4]

          [-1/16]

Therefore, the integrating factor is e^(t/4), and we can rewrite the system as:

d/dt(e^(t/4)x) = (1/4)e^(t/4)(2x - y)

d/dt(e^(t/4)y) = (1/4)e^(t/4)(4x + 6y)

Integrating both equations, we obtain:

e^(t/4)x = ∫[(1/4)e^(t/4)(2x - y)]dt

e^(t/4)y = ∫[(1/4)e^(t/4)(4x + 6y)]dt

Simplifying the integrals and applying the initial conditions, we find the solution:

x(t) = 40e^(-4t) + 4te^(-4t)

y(t) = -20e^(-4t) - 2te^(-4t)

Therefore, the solution to the system is x(t) = 40e^(-4t) + 4te^(-4t) and y(t) = -20e^(-4t) - 2te^(-4t).

To learn more about matrix  click here

brainly.com/question/16932004

#SPJ11

perform quick sort on the following list: 17 , 28 , 20 , 41 , 25 , 12 , 6 , 18 , 7 , 4 17,28,20,41,25,12,6,18,7,4

Answers

The quick sort algorithm sorts the given list [17, 28, 20, 41, 25, 12, 6, 18, 7, 4] in ascending order as [4, 6, 7, 12, 18, 20, 25, 28, 41].

How to perform a quick sort?

To perform a quick sort on the given list [17, 28, 20, 41, 25, 12, 6, 18, 7, 4], we can follow these steps:

1. Choose a pivot element from the list. Let's select the first element, 17, as the pivot.

2. Partition the list around the pivot by rearranging the elements such that all elements smaller than the pivot come before it, and all elements larger than the pivot come after it. After the partitioning, the pivot element will be in its final sorted position.

The partitioning step can be done using the following process:

- Initialize two pointers, i and j, pointing to the start and end of the list.

- Move the pointer i from left to right until an element greater than the pivot is found.

- Move the pointer j from right to left until an element smaller than the pivot is found.

- Swap the elements at positions i and j.

- Repeat the above steps until i and j cross each other.

After the partitioning step, the list will be divided into two sublists, with the pivot in its sorted position.

3. Recursively apply the above steps to the sublists on either side of the pivot until the entire list is sorted.

Let's go through the steps for the given list:

Initial list: [17, 28, 20, 41, 25, 12, 6, 18, 7, 4]

Step 1:

Pivot: 17

Step 2:

After partitioning: [12, 6, 4, 7, 17, 28, 20, 41, 25, 18]

Step 3:

Recursively sort the sublists:

Left sublist: [12, 6, 4, 7]

Right sublist: [28, 20, 41, 25, 18]

Repeat the partitioning and sorting process for the sublists.

Left sublist:

Pivot: 12

After partitioning: [7, 6, 4, 12]

Right sublist:

Pivot: 28

After partitioning: [20, 25, 28, 41, 18]

Continue the process for the remaining sublists:

Left sublist:

Pivot: 7

After partitioning: [4, 6, 7, 12]

Right sublist:

Pivot: 20

After partitioning: [18, 20, 25, 28, 41]

Finally, the sorted list is obtained by combining the sorted sublists:

[4, 6, 7, 12, 18, 20, 25, 28, 41]

Therefore, the quick sort algorithm sorts the given list [17, 28, 20, 41, 25, 12, 6, 18, 7, 4] in ascending order as [4, 6, 7, 12, 18, 20, 25, 28, 41].

To know more about quick sort algorithm, refer here:

https://brainly.com/question/13155236

#SPJ4

please solve
Find the equation of the plane containing the points (-1,3,4), (-1, 9, 4), and (1,-1, 1). Find one additional point on this plane.

Answers

The equation of the plane containing the points (-1, 3, 4), (-1, 9, 4), and (1, -1, 1) is x - y - z = 0. An additional point on the plane is (1, -1, -1).

To find the equation of a plane, we can use the point-normal form of the equation, which states that the equation of a plane can be expressed as ax + by + cz = d, where (a, b, c) is the normal vector to the plane, and (x, y, z) are the coordinates of any point on the plane.

To determine the normal vector, we can use the cross product of two vectors that lie in the plane. Taking the vectors formed by the given points (-1, 3, 4), (-1, 9, 4), and (1, -1, 1), we can calculate the cross product:

v1 = (-1, 9, 4) - (-1, 3, 4) = (0, 6, 0)

v2 = (1, -1, 1) - (-1, 3, 4) = (2, -4, -3)

Taking the cross product of v1 and v2, we have:

n = v1 x v2 = (6, 0, -12)

Now, we can substitute the coordinates of one of the given points (e.g., (-1, 3, 4)) and the normal vector (6, 0, -12) into the point-normal form equation to obtain the equation of the plane:

6(x + 1) - 12(y - 3) + 0(z - 4) = 0

6x - 12y - 12z = -6 + 36 + 0

6x - 12y - 12z = 30

Dividing both sides by 6, we get:

x - 2y - 2z = 5

Therefore, the equation of the plane containing the given points is x - 2y - 2z = 5. To find an additional point on this plane, we can substitute the coordinates into the equation and solve for one of the variables. For example, substituting x = 1 and y = -1 into the equation gives:

1 - 2(-1) - 2z = 5

1 + 2 - 2z = 5

3 - 2z = 5

-2z = 2

z = -1

Hence, an additional point on the plane is (1, -1, -1).

Learn more about point-normal form here:

https://brainly.com/question/30266589

#SPJ11

Determine whether the function is a solution of the differential equation y(4) - 7y = 0. y = 7 cos(x) Yes No Need Help? Read it Watch It

Answers

The function is not a solution of the differential equation y(4) - 7y = 0. y = 7 cos(x) .

To determine if y(x) = 7cos(x) is a solution of the differential equation y(4) - 7y = 0, we need to substitute y(x) and its derivatives into the differential equation:

y(x) = 7cos(x)

y'(x) = -7sin(x)

y''(x) = -7cos(x)

y'''(x) = 7sin(x)

y''''(x) = 7cos(x)

Substituting these into the differential equation, we get:

y(4)(x) - 7y(x) = y'''(x) - 7y(x) = 7sin(x) - 7(7cos(x)) = -42cos(x) ≠ 0

Since the differential equation is not satisfied by y(x) = 7cos(x), y(x) is not a solution of the differential equation y(4) - 7y = 0.

To know more about function refer here:

https://brainly.com/question/31062578#

#SPJ11

Use the triangle below to fill in the blanks.

Answers

Answer:

opposite/adjacent

Step-by-step explanation:

tangent of any angle is:

[tex]\frac{opposite}{adjacent}[/tex]

Hope this helps! :)

Solve the following differential equation with the given
boundary conditions. - If there are infinitely many solutions, use c for any
undetermined constants.
- If there are no solutions, write No Solution.
- Write answers as functions of x (i.e. y = y(x)).
y" +4y = 0

Answers

The given differential equation is y" + 4y = 0. This is a second-order linear homogeneous ordinary differential equation. The general solution is y(x) = c1cos(2x) + c2sin(2x), where c1 and c2 are arbitrary constants.

To solve the differential equation y" + 4y = 0, we assume a solution of the form y(x) = e^(rx). Taking the second derivative and substituting it into the equation, we get r^2e^(rx) + 4e^(rx) = 0. Factoring out e^(rx), we have e^(rx)(r^2 + 4) = 0.

For a nontrivial solution, we require r^2 + 4 = 0. Solving this quadratic equation, we find r = ±2i. Since the roots are complex, the general solution is of the form y(x) = c1e^(0x)cos(2x) + c2e^(0x)sin(2x), which simplifies to y(x) = c1cos(2x) + c2sin(2x).

Here, c1 and c2 are arbitrary constants that can take any real values, representing the family of solutions to the differential equation. Therefore, the general solution to the given differential equation is y(x) = c1cos(2x) + c2sin(2x), where c1 and c2 are undetermined constants.

To learn more about differential equations click here:

brainly.com/question/25731911

#SPJ11

#3 Evaluate Sti³t-4 dt (10 #4 Find f'(x) if f(x) = S₁²² ₁²³ +1 =_=_=_=_d+ + S +²=²1 -dt (15 points) (10 points)

Answers

The derivative of the given function, f(x) = S₁²² ₁²³ +1 ===_=_d+ + S +²=²1 -dt, is evaluated.

To find the derivative of the given function, we need to apply the rules of differentiation. Let's break down the given function step by step. The function consists of three terms separated by the plus sign. In the first term, we have S₁²² ₁²³ + 1.

Without further information about the meaning of these symbols, it is challenging to provide a specific evaluation. However, assuming S₁²² and ₁²³ are constants, their derivatives would be zero, and the derivative of 1 with respect to x is also zero.

Hence, the derivative of the first term would be zero.

Moving on to the second term, which is ===_=_d+, we again encounter symbols without clear context. Without knowing their meaning, it is not possible to evaluate the derivative of this term.

Lastly, in the third term, S +²=²1 - dt, the presence of S and dt suggests they are variables. The derivative of S with respect to x would be dS/dx, and the derivative of dt with respect to x would be zero since t is a constant. However, without further information, it is difficult to provide a complete evaluation of the derivative of the third term. Overall, the given function's derivative depends on the specific meanings and relationships of the symbols used in the function, which are not clear from the provided information.

Learn more about derivative of a function :

https://brainly.com/question/29089690

#SPJ11

Assignment Responses/submit/dep 29213268&tagswautosaved question4780406_8 Need Help Read it 9. [2/3 Points] DETAILS PREVIOUS ANSWERS SCALCETI 6.2.021. Find the volume V of the solid obtained by rotating the region bounded by the given curves about the specified line. y = x2, x = y; about y = 1 3 V 10" X Sketch the region. སུ་ e. X 2 2 - 1 -1

Answers

The volume V of the solid obtained by rotating the region bounded by the given curves about the specified line is π/243 cubic units.

To sketch the region, we first plot the curves y = x^2 and x = y. We can see that the region is bound by the curves y = x^2, x = y, and the x-axis between x = 0 and x = 1.

To rotate this region about y = 1/3, we need to translate the entire region up by 1/3 units. This gives us the following solid of rotation:

We can see that the resulting solid is a cone with its tip at the point (0, 1/3) and its base on the plane y = 4/9. To find the volume of this solid, we can use the formula for the volume of a cone:

V = (1/3)πr^2h

where r is the radius of the base and h is the height of the cone.

To find the radius, we need to find the distance between the point (0, 1/3) and the curve x = y. This gives us:

r = y - 1/3

To find the height, we need to find the distance between y = x^2 and the plane y = 4/9. This gives us:

h = 4/9 - x^2

We can express both r and h in terms of x, since x is the variable of integration:

r = y - 1/3 = x^2 - 1/3

h = 4/9 - x^2

Now we can substitute these into the formula for the volume:

V = ∫₀¹ (1/3)π(x^2 - 1/3)^2(4/9 - x^2) dx

Simplifying this integral is a bit messy, but doable with some algebraic manipulation. The final result is: V = π/243

Therefore, the volume of the solid obtained by rotating the region bounded by y = x^2, x = y, and the x-axis between x = 0 and x = 1 about y = 1/3 is π/243 cubic units.

To know more about volume refer here:

https://brainly.com/question/28058531#

#SPJ11

Write a cost function for the problem. Assume that the relationship is linear. Marginal cost, $80; 40 items cost $4,300 to produce + A. C(x) = 28x +4,300 B. C(x) = 80% +4,300 C. C(x) = 28x + 1.100 OD.

Answers

The cost function for the given problem, assuming a linear relationship, can be expressed as C(x) = mx + b, where x represents the number of items produced, C(x) represents the total cost, and m and b are constants to be determined. The correct option will be provided after the explanation.

The cost function for a linear relationship can be written in the form C(x) = mx + b, where m represents the slope (marginal cost) and b represents the y-intercept (fixed cost). We need to determine the values of m and b based on the given information. In this case, we are given that the marginal cost is $80, which means that for each additional item produced, the cost increases by $80. This gives us the slope m = 80.

We are also given that 40 items cost $4,300 to produce. By substituting x = 40 into the cost function, we can solve for the y-intercept b. Using the equation 4,300 = (80 * 40) + b, we find b = 1,100. Therefore, the correct cost function for this problem is C(x) = 80x + 1,100.

Option C, C(x) = 28x + 1,100, is incorrect as it does not match the given information about the marginal cost and the cost of producing 40 items. Please note that option B, C(x) = 80% + 4,300, is not a valid cost function as it includes a percentage without any reference to the number of items produced. Option A, C(x) = 28x + 4,300, does not match the given information about the marginal cost.

Learn more about equation here: https://brainly.com/question/12788590

#SPJ11

1.- Determine True or False for each statement
a)
b) A partition of an [a,b] interval, where all subintervals have the same width is called a regular partition
c) Let f be an odd integrable function over [−π,π], then
d) If ,then is the area under the graph of f over [a,b]

Answers

a) False

b) True

c) False

d) True

a) The statement is false. A partition of an [a, b] interval, where all subintervals have the same width, is called an equidistant partition, not a regular partition. A regular partition allows for varying widths of the subintervals.

b) The statement is true. A partition of an interval [a, b] where all subintervals have the same width is indeed called a regular partition or an equidistant partition. This means that the distance between any two consecutive partition points is constant.

c) The statement is false. An odd integrable function over a symmetric interval such as [−π, π] does not guarantee that the integral will be zero. An odd function satisfies the property f(-x) = -f(x), but it does not imply that the integral over the entire interval will be zero unless specific conditions are met.

d) The statement is true. If the integral of a function f(x) from a to b is equal to the integral of its absolute value |f(x)| from a to b, then the integral represents the area under the graph of f(x) over the interval [a, b]. This property holds because the absolute value function ensures that any negative areas below the x-axis are counted as positive areas, resulting in the total area under the graph.

Learn more about integrable function here:

https://brainly.com/question/30760341

#SPJ11

Find the first five partial sums of the series 66 K 2 ak K! K=1

Answers

the first five partial sums of the series 66 K 2 ak K! K=1

For k = 1: S_1 = [tex](1^2 * a_1 / 1!) = a_1.[/tex]

For k = 2: S_2 =[tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) = a_1 + 2a_2.[/tex]

For k = 3: S_3 =[tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) = a_1 + 2a_2 + (3a_3 / 2).[/tex]

For k = 4: S_4 = [tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) + (4^2 * a_4 / 4!) = a_1 + 2a_2 + (3a_3 / 2) + (2a_4 / 3).[/tex]

For k = 5: S_5 = [tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) + (4^2 * a_4[/tex]

To find the first five partial sums of the series 66 ∑ (k^2 * ak / k!), k=1, we need to evaluate the series by substituting values of k and summing the terms.

Let’s calculate the partial sums step by step:

For k = 1: S_1 =[tex](1^2 * a_1 / 1!) = a_1.[/tex]

For k = 2: S_2 =[tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) = a_1 + 2a_2.[/tex]

For k = 3: S_3 =[tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) = a_1 + 2a_2 + (3a_3 / 2).[/tex]

For k = 4: S_4 = [tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) + (4^2 * a_4 / 4!) = a_1 + 2a_2 + (3a_3 / 2) + (2a_4 / 3).[/tex]

For k = 5: S_5 = [tex](1^2 * a_1 / 1!) + (2^2 * a_2 / 2!) + (3^2 * a_3 / 3!) + (4^2 * a_4[/tex]

These are the first five partial sums of the series. Each partial sum is obtained by adding another term to the previous sum, with each term depending on the corresponding term of the series and the value of k. The series converges as more terms are added, and the partial sums provide a way to approximate the total sum of the series.

Learn more about partial sums here:

https://brainly.com/question/31900309

#SPJ11

please help with both
Find an equation of the plane. The plane through the point (3, 0, 2) and perpendicular to the line x = 8t, y = 3-t, Z=5+ 2t Need Help? Rendit Submit Answer 15. [-/4 points) DETAILS SCALCETS 12.5.027.

Answers

The equation of the plane passing through the point (3, 0, 2) and perpendicular to the line x = 8t, y = 3 - t, z = 5 + 2t is 8x + y - 2z = 29.

To find the equation of the plane, we need a point on the plane and its normal vector. The given point (3, 0, 2) lies on the plane. To determine the normal vector, we can use the direction vector of the line, which is (8, -1, 2). Since the plane is perpendicular to the line, the normal vector of the plane is parallel to the line's direction vector. Therefore, the normal vector of the plane is also (8, -1, 2).

Using the point-normal form of a plane equation, we substitute the values into the equation:[tex]8(x - 3) + (-1)(y - 0) + 2(z - 2) = 0[/tex]. Simplifying this equation gives us[tex]8x + y - 2z = 29,[/tex]which is the equation of the plane passing through the given point and perpendicular to the given line.

Learn more about vector  here

brainly.com/question/29261830

#SPJ11

an = 10. Which statement is true for the sequence defined as 12 + 22 + 32 + ... + (n + 2)2 ? 2n2 + 11n + 15 (a) Monotonic, bounded and convergent. (b) Not monotonic, bounded and convergent. (c) Monotonic, bounded and divergent. (d) Monotonic, unbounded and divergent. (e) Not monotonic, unbounded and divergent.

Answers

For the sequence the correct statement is Monotonic, bounded, and divergent. So the correct answer is option (c).

To determine which statement is true for the sequence defined as 12 + 22 + 32 + ... + (n + 2)2, let's examine the pattern of the sequence.

The given sequence represents the sum of squares of consecutive natural numbers starting from 1. In other words, it can be written as:

12 + 22 + 32 + ... + n2 + (n + 1)2 + (n + 2)2

Expanding the squares, we have:

1 + 4 + 9 + ... + n2 + n2 + 2n + 1 + n2 + 4n + 4

Combining like terms, we get:

3n2 + 6n + 6

Now, let's substitute n = 10 into the expression:

3(10)2 + 6(10) + 6

= 300 + 60 + 6

= 366

Therefore, when n = 10, the sum of the sequence is 366.

Now, let's analyze the given statements:

(a) Monotonic, bounded, and convergent.

(b) Not monotonic, bounded, and convergent.

(c) Monotonic, bounded, and divergent.

(d) Monotonic, unbounded, and divergent.

(e) Not monotonic, unbounded, and divergent.

To determine whether the sequence is monotonic, we need to check if the terms of the sequence consistently increase or decrease.

If we observe the given sequence, we can see that the terms are increasing, as we are adding squares of consecutive natural numbers. So, the sequence is indeed monotonic.

Regarding boundedness, as the sequence is increasing, it is not bounded above. Therefore, it is not bounded.

Lastly, since the sequence is not bounded, it cannot be convergent. Instead, it is divergent.

Based on these analyses, the correct statement for the given sequence is:

Monotonic, bounded, and divergent. So option c is the correct answer.

To learn more about sequence: https://brainly.com/question/7882626

#SPJ11

Suppose f(x) and f'(x) are continuous everywhere, and have the following values: 0 10 20 H 30 f'(x) 2 8 6 -7 Based on this, determine what you are willing to guarantee. Between 0 and = 10 you guarante✔ Select an answer there is a local maximum Between 10 and = 20 you guarar there is a local minimum nothing Between = 20 and = 30 you guarant.. Between= 30 and = 40 you guarantee Select an answer C 8 C 40 12

Answers

Between 0 and 10, we guarantee there is a local maximum. This is because f'(x) is positive from x=0 to x=10, indicating that f(x) is increasing. At x=10, f'(x) changes sign from positive to negative, indicating that f(x) reaches a local maximum at this point.

Between 10 and 20, we guarantee there is a local minimum. This is because f'(x) is negative from x=10 to x=20, indicating that f(x) is decreasing.

At x=20, f'(x) changes sign from negative to positive, indicating that f(x) reaches a local minimum at this point.

Between 20 and 30, we cannot make any guarantees based on the given information. This is because f'(x) changes sign multiple times in this interval, indicating that there may be multiple local extrema or none at all.

Between 30 and 40, we can guarantee that f'(x)=12. This is because the given information states that f'(x)=6 for x=20

To know more about local maximum refer here:

https://brainly.com/question/29404086#

#SPJ11

how many different makes and models of commercial aircraft are currently in service by the world's airlines

Answers

There are approximately 19 major commercial aircraft manufacturers, with hundreds of different makes and models currently in service by airlines worldwide.

To determine the number of different commercial aircraft makes and models in service, one can research major aircraft manufacturers, such as Boeing, Airbus, Bombardier, Embraer, and others. Each manufacturer produces multiple models, with various sub-models designed for specific airline needs. By researching each manufacturer's aircraft line and cross-referencing with the fleets of airlines around the world, a comprehensive list of commercial aircraft in service can be compiled. However, this number is constantly changing due to new models being introduced and older ones being retired.

The world's airlines currently operate hundreds of different makes and models of commercial aircraft, with a variety of manufacturers contributing to the diverse fleet in service today.

To know more about commercial aircraft manufacturers visit:

https://brainly.com/question/28873287

#SPJ11

Compute the limit by substituting the Maclaurin series for the trig and inverse trig functions. (Use symbolic notation and fractions where needed.) tan(9x) – 9x cos (9x) – 243 x3 — = lim x0 75

Answers

The limit is -243/75 or -3.24.

How did we get the value?

To compute the limit using the Maclaurin series for trigonometric and inverse trigonometric functions, express each term in the given expression using their respective series expansions. Break down each term:

1. The Maclaurin series expansion for tangent (tan) function is:

tan(x) = x + (x³)/3 + (2x⁵)/15 + (17x⁷)/315 + ...

Substitute 9x for x in this series expansion to get the Maclaurin series for tan(9x):

tan(9x) = 9x + (81x³)/3 + (2 x (729x⁵))/15 + (17 × (6561x⁷))/315 + ...

2. The Maclaurin series expansion for cosine (cos) function is:

cos(x) = 1 - (x²)/2 + (x⁴)/24 - (x⁶)/720 + ...

Again, substitute 9x for x in this series expansion to get the Maclaurin series for cos(9x):

cos(9x) = 1 - (81x²)/2 + (6561x⁴)/24 - (59049x⁶)/720 + ...

3. The cubic term, 243x³, does not require substitution or approximation.

Now, rewrite the given expression using the Maclaurin series for trigonometric and inverse trigonometric functions:

lim(x->0) [tan(9x) - 9x cos(9x) - 243x³]/75

= lim(x->0) [(9x + (81x³)/3 + (2 × (729x⁵))/15 + (17 × (6561x⁷))/315) - 9x(1 - (81x²)/2 + (6561x⁴)/24 - (59049x⁶)/720) - 243x³]/75

Now, simplify and collect the terms with the same power of x:

= lim(x->0) [(9x - 9x) + (81x³/3 - 81x³/2) + (2 × (729x⁵)/15) - (17 × (6561x⁷)/315) + (9x³/2) - (81x⁵/24) + (729x⁷/80) - (17 × (6561x⁷)/315) - 243x³]/75

The terms (9x - 9x) and (81x³/3 - 81x³/2) cancel out, leaving:

= lim(x->0) [(2 × (729x⁵)/15) - (17 × (6561x⁷)/315) + (9x³/2) - (81x⁵/24) + (729x⁷/80) - (17 × (6561x⁷)/315) - 243x³]/75

Now, simplify further and remove the common factor of x³ from the remaining terms:

= lim(x->0) [(2 × (729x²)/15) - (17 x (6561x⁴/315) + (9x/2) - (81x²/24) + (729x⁴80) - (17 x. (6561x⁴)/315) - 243]/75

Finally, take the limit as x

approaches 0 by directly substituting x = 0 into the expression:

= [(2 × (729(0)²)/15) - (17 x (6561(0)⁴)/315) + (9(0)/2) - (81(0)²/24) + (729(0)⁴/80) - (17 × (6561(0)⁴)/315) - 243]/75

= [-243]/75

Simplifying further:

= -243/75

Therefore, the limit is -243/75 or -3.24.

learn more about trigonometric functions: https://brainly.com/question/25618616

#SPJ4








Wels Submission 1 (0/2 points) Wednesday, May 18, 2022 03:10 PM PDT Find the amount (future value) of the ordinary annuity. (Round your answer to the nearest cent.) $950/month for 15 years at 4% / yea

Answers

The amount (future value) of the ordinary annuity can be calculated using the formula for the future value of an ordinary annuity:  950 * [(1 + 0.04/12)^(12*15) - 1] / (0.04/12)

A = P * [(1 + r)^n - 1] / r

where A is the future value, P is the periodic payment, r is the interest rate per period, and n is the number of periods.

In this case, the periodic payment is $950/month, the interest rate per year is 4%, and the annuity lasts for 15 years. To use the formula, we need to convert the interest rate and time period to the same units. Since the periodic payment is monthly, we convert the interest rate to a monthly rate by dividing it by 12, and we multiply the number of years by 12 to get the number of periods.

So, the future value is:

A = 950 * [(1 + 0.04/12)^(12*15) - 1] / (0.04/12)

Calculating this expression will give the future value of the annuity rounded to the nearest cent.

To learn more about expression  click here

brainly.com/question/30265549

#SPJ11

Because of terrain dificulties, two sides of a fence can be built for $4 per ft., while the other two sides cost $8 per ft. Find the field of maximum area that can be enclosed for $1200 Use the method of Lagrange multipliers to solve the problem Complete parts (a) through (e) (a) Let x be the width of the field (in feet) and let y be the length of the field (in feet). Write the function to be maximized Maximize f(x,y)= (b) Write the constraint in the form g(x,y)=0 The constraint with all common factors removed is gixy) - (c) Form the Lagrange function. F{xy\)=f(xy)-A=9(xy}= D (d) Find the partial derivatives of the Lagrange function F₂(xy.A) = F₂(xy) F₂(xYA) = (e) Find the field of maximum area that can be enclosed for $1200 The length is ft The width is The maximum area of the field is

Answers

The maximum area that can be enclosed for $1200 is approximately 4500 square feet. To solve the problem using the method of Lagrange multipliers, we need to follow these steps:

(a) The function to be maximized is given by f(x, y) = xy, representing the area of the field.

(b) The constraint in the form g(x, y) = 0 is obtained by considering the cost of building the fence. Since two sides cost $4 per foot and the other two sides cost $8 per foot, the total cost of the fence is given by 4x + 8x + 4y + 8y = 1200. Simplifying this equation, we get 12x + 12y = 1200, which can be further simplified as x + y = 100.

(c) The Lagrange function is formed by introducing a Lagrange multiplier A and subtracting it from the function to be maximized. Therefore, F(x, y, A) = xy - A(x + y - 100).

(d) To find the partial derivatives of the Lagrange function, we compute Fₓ(x, y, A) and Fᵧ(x, y, A). Fₓ(x, y, A) = y - A and Fᵧ(x, y, A) = x - A.

(e) To determine the field of maximum area, we set the partial derivatives equal to zero and solve the resulting system of equations. Setting y - A = 0 and x - A = 0, we find A = y and A = x, respectively. Substituting these values back into the constraint equation x + y = 100, we get x + x = 100, which simplifies to 2x = 100. Solving for x, we find x = 50. Substituting this value back into the constraint equation, we obtain y = 50 as well.

Therefore, the field of maximum area that can be enclosed for $1200 is a square field with both the length and width measuring 50 feet. The maximum area is calculated by multiplying the length and width, resulting in 50 feet * 50 feet = 2500 square feet. Since we are considering both sides of the fence, the total area is twice this value, which gives us 5000 square feet. However, the cost constraint limits us to $1200, so we need to divide this area by 2 to stay within the given budget, resulting in an approximate maximum area of 4500 square feet.

Learn more about Lagrange multipliers :

https://brainly.com/question/30776684

#SPJ11

please complete all 6
Problem 2. (2 points) Write SII, sw, z)dV as an torated integral in each of the six orders of integration, where I su the region bounded by z = 0), z = 5), and ar? op

Answers

To write the triple integral SII, sw, z)dV as an iterated integral in each of the six orders of integration, we need to determine the limits of integration for each variable.

For each value of z, we need to determine the bounds for x within the region R.Therefore, the iterated integral can be written as:

[tex]∫∫∫R f(x, y, z) dy dzd[/tex]

Order of integration: dy dxdzThe limits of integration for y are determined by the bounds of the y-variable within the region R.

For each value of y, we need to determine the bounds for x within the region R.

For each value of x, we need to determine the bounds for z within the region bounded by z = 0 and z = 5.

Therefore, the iterated integral can be written as:

[tex]∫∫∫R f(x, y, z) dy dxdz[/tex]

Order of integration: dx dzdy

The limits of integration for x are determined by the bounds of the x-variable within the region R.

For each value of x, we need to determine the bounds for z within the region bounded by z = 0 and z = 5.

For each value of z, we need to determine the bounds for y within the region R.

Therefore, the iterated integral can be written as:

[tex]∫∫∫R f(x, y, z) dx dzdy[/tex]

Order of integration: dx dydz

The limits of integration for x are determined by the bounds of the x-variable within the region R.For each value of x, we need to determine the bounds for y within thregion R.For each value of y, we need to determine the bounds for z within the region bounded by z = 0 and z = 5.Therefore, the iterated integral can be written as:

[tex]∫∫∫R f(x, y, z) dx dydz[/tex]

Please note that the specific bounds for each variable depend on the given region R and the function f(x, y, z) being integrated.

To learn more about  integral click on the link below:

brainly.com/question/32075815

#SPJ11

Calculate the following double integral. 2 3 I = 1-1² 1². (4+ 12xy) dx dy y=1 x=0 I = (Your answer should be entered as an integer or a fraction.) 5 marks Submit answer

Answers

The value of the double integral ∬(4 + 12xy) dA over the region R, where R is defined as the rectangle with vertices (0, 0), (1, 0), (1, 1), and (0, 1), is 3.

To calculate the double integral, we need to integrate the given function (4 + 12xy) over the region R. The integral can be evaluated by integrating with respect to x first and then with respect to y.

Integrating with respect to x, we get:

∫[0 to 1] (4x + 6xy^2) dx = 2x^2 + 3xy^2 | [0 to 1] = 2 + 3y^2

Next, we integrate this result with respect to y:

∫[0 to 1] (2 + 3y^2) dy = 2y + y^3 | [0 to 1] = 2 + 1 = 3

Therefore, the value of the given double integral over the region R is 3.

In conclusion, the double integral ∬(4 + 12xy) dA over the region R is equal to 3.

To learn more about Double integrals, visit:

https://brainly.com/question/27360126

#SPJ11

I.AE.006. MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER EXAMPLE 6 A particle moves along a line so that its velocity at time t is v(t) = t² - t - 20 (measured in meters per second). (a) Find the displac

Answers

The displacement of a particle moving along a line can be found by integrating its velocity function. Given that the velocity of the particle is v(t) = t² - t - 20, we can determine the particle's displacement.

To find the displacement, we integrate the velocity function with respect to time.  ∫(t² - t - 20) dt = (1/3)t³ - (1/2)t² - 20t + C                                                    Where C is the constant of integration. The displacement of the particle is given by the definite integral of the velocity function over a specific time interval. If the time interval is from t = a to t = b, the displacement would be ∫[a, b](t² - t - 20) dt = [(1/3)t³ - (1/2)t² - 20t] evaluated from a to b                  This will give us the displacement of the particle over the specified time interval.

Learn more about velocity here:

https://brainly.com/question/24259848

#SPJ11

Prove that 1/n has a terminating decimal (i.e. eventually
repeats in all zeros) if and only if the prime factorization of n
contains only factors of 2 and 5.

Answers

By proving terminal decimals, we can prove that n contains only factors of 2 and 5, that is, the prime factorization of n contains only factors of 2 and 5.

Let's prove that 1/n has a terminating decimal (i.e. eventually
repeats in all zeros) if and only if the prime factorization of n contains only factors of 2 and 5.What are prime numbers?Prime numbers are natural numbers greater than 1 that have no positive divisors other than 1 and themselves. Prime numbers play a significant role in the theory of numbers.

Numbers that aren't prime numbers are composite numbers.Prime factorization is the operation of breaking down a number into its prime factors.Prime factorization of a number is the multiplication of the power of the prime factors that result in that number.The theorem that can be used to prove that 1/n has a terminating decimal (i.e. eventually repeats in all zeros) if and only if the prime factorization of n contains only factors of 2 and 5 is called the Theorem of Decimals. Therefore, the proof can be divided into two parts. First, it must be proven that the prime factorization of n contains only factors of 2 and 5, and then it must be proven that 1/n has a terminating decimal only if the prime factorization of n contains only factors of 2 and 5.

Prove that if the prime factorization of n contains only factors of 2 and 5, then 1/n has a terminating decimal (i.e. eventually repeats in all zeros).The prime factorization of n is given as [tex]n = 2^x * 5^y[/tex]where x and y are non-negative integers, or we can say that n contains only factors of 2 and 5.The decimal representation of a fraction 1/n is given by dividing 1 by n.

Let's represent the fraction in the following way:

[tex]$$\frac{1}{n}=\frac{1}{2^x5^y}=\frac{2^a5^b}{2^x5^y}=\frac{2^{a-x}5^{b-y}}{1}$$[/tex]

We need to show that this terminates and eventually repeats in all zeros. It repeats only if the denominator is a product of prime factors that are factors of 10, that is, 2 and 5. Since the prime factorization of the denominator of the fraction is given by 2^x × 5^y, we can see that there is a finite number of prime factors in the denominator. This means that when we divide, the decimal will eventually end up repeating and will only contain zeros.

Prove that if 1/n has a terminating decimal (i.e. eventually repeats in all zeros), then the prime factorization of n contains only factors of 2 and 5.We begin by assuming that 1/n has a terminating decimal, which means that the decimal eventually repeats in all zeros. We can represent this decimal as 0.00...0d where d is the repeating digit.

The decimal representation of a fraction 1/n is given by dividing 1 by n. Therefore, we can represent this decimal as follows: [tex]$$\frac{1}{n}=0.00...0d= \frac{d}{10^m}+\frac{d}{10^{m+1}}+...+\frac{d}{10^{m+p}}+...=\sum_{i=m}^\infty\frac{d}{10^{i}}$$[/tex]

where m is the position of the first non-zero digit and p is the number of repeating digits.

We can rewrite this in the following way:[tex]$$\frac{d}{10^{m+p}}\sum_{i=0}^{m-1}\frac{1}{10^{i}}+\frac{d}{10^{m+p}}\sum_{i=0}^{\infty}\frac{1}{10^{m+p+i}}$$[/tex]

Since the decimal representation of 1/n terminates, the decimal must eventually repeat in all zeros. This means that the repeating digits must be in the form of 0.00...0d, where the number of zeros between the decimal point and the digit d is equal to p-1. Therefore, we can say that d is a multiple of 10^(p-1).Since d is a multiple of [tex]10^(p-1)[/tex], we can write d as:

[tex]$$d=10^{p-1}k$$[/tex] where k is an integer. Therefore, we can rewrite our equation as:

[tex]$$\frac{d}{10^{m+p}}=\frac{k}{10^{m-p+1}}$$[/tex]

Since k is an integer, we can say that 1/n can be written in the following form:

[tex]$$\frac{1}{n}=\frac{k}{2^{x}5^{y}}$$[/tex]

This shows that n contains only factors of 2 and 5, that is, the prime factorization of n contains only factors of 2 and 5.

Learn more about prime factorization here:

https://brainly.com/question/29763746

#SPJ11




a. x2+3x-10 lim X-5 x2-25 b. lim 12x4-2x2-7x x-00 3x4-8x3 2. (8 pts.) Find the derivatives. 5e*- a. f(x) = x b. g(x) = (5x5 - 2 ln x)11 3. (10 pts.) Wisebrook West, an apartment complex, has 250 units

Answers

a. The limit of[tex](x^2 + 3x - 10)/(x^2 - 25)[/tex]as x approaches 5 is undefined.

In the given expression, when x approaches 5, the denominator becomes 0 (x^2 - 25 = 0), which results in division by zero.

Division by zero is undefined, so the limit does not exist.

b. The limit of[tex](12x^4 - 2x^2 - 7x)/(3x^4 - 8x^3)[/tex]as x approaches 0 is 7/8.

To find the limit, we can divide every term in the numerator and denominator by x^4, since x^4 is the highest power of x in both expressions.

This simplifies the expression to ([tex]12 - 2/x^2 - 7/x^3)/(3 - 8/x[/tex]). As x approaches 0, the terms involving 1/x^2 and 1/x^3 tend to infinity, and the term involving 1/x tends to 0. Therefore, the limit simplifies to (12 - 0 - 0)/(3 - 0), which is 12/3 = 4.

Learn more about denominator here:

https://brainly.com/question/15007690

#SPJ11

Find the volume of the solid generated when R (shaded region) is revolved about the given line. T x=2- 73 sec y, x=2, y = ő and y= 0; about x = 2 The volume of the solid obtained by revolving the reg

Answers

The volume of the solid generated that is revolving region R about the line x = 2 is equal to 12.853 cubic units.

To find the volume of the solid generated when the shaded region R is revolved about the line x = 2,

use the method of cylindrical shells.

The region R is bounded by the curves x = 2 - √3sec(y), x = 2, y = π/6, and y = 0.

First, let us determine the limits of integration for the variable y.

The region R lies between y = 0 and y = π/6.

Now, set up the integral to calculate the volume,

V = [tex]\int_{0}^{\pi /6}[/tex]2π(radius)(height) dy

The radius of each cylindrical shell is the distance between the line x = 2 and the curve x = 2 - √3sec(y).

radius

= 2 - (2 - √3sec(y))

= √3sec(y)

The height of each cylindrical shell is the infinitesimal change in y, which is dy.

The integral is,

V = [tex]\int_{0}^{\pi /6}[/tex]2π(√3sec(y))(dy)

To simplify this integral, make use of the trigonometric identity,

sec(y) = 1/cos(y).

V = 2π[tex]\int_{0}^{\pi /6}[/tex] (√3/cos(y))(dy)

Now, integrate with respect to y,

V = 2π(√3)[tex]\int_{0}^{\pi /6}[/tex] (1/cos(y))dy

The integral of (1/cos(y))dy can be evaluated as ln|sec(y) + tan(y)|.

So, the integral is,

⇒V = 2π(√3)[ln|sec(π/6) + tan(π/6)| - ln|sec(0) + tan(0)|]

⇒V = 2π(√3)[ln(√3 + 1) - ln(1)]

⇒V = 2π(√3)[ln(√3 + 1)]

⇒V ≈ 12.853 cubic units

Therefore, the volume of the solid obtained by revolving the region R about the line x = 2 is approximately 12.853 cubic units.

Learn more about volume here

brainly.com/question/17329017

#SPJ4

The above question is incomplete , the complete question is:

Find the volume of the solid generated when R (shaded region) is revolved about the given line.  x=2-√3 sec y, x=2, y = π/6 and y= 0; about x = 2

The volume of the solid obtained by revolving the region x = 2.








Summarize the pertinent information obtained by applying the graphing strategy and sketch the graph of f(x) = 4x e -0.2% Find the domain of f(x). Select the correct choice below and, if necessary, fil

Answers

The graph of [tex]f(x) = 4x * e^{-0.2x}[/tex] is an exponential decay function with a domain of (-∞, +∞).

How topply graphing strategy?

By applying the graphing strategy, we have obtained the following information:

1. Function: [tex]f(x) = 4x * e^{-0.2x}[/tex]

2. Graph shape: The graph of f(x) is an exponential decay function.

3. Vertical asymptote: There is no vertical asymptote.

4. Horizontal asymptote: The graph approaches y = 0 as x approaches positive infinity.

5. Intercepts: The x-intercept occurs at x = 0, and the y-intercept is 0.

6. Increasing/decreasing intervals: The function is decreasing for all x values.

7. Domain: The domain of f(x) is all real numbers since the exponential function is defined for all x.

Based on this information, the graph of [tex]f(x) = 4x * e^{-0.2x}[/tex] is an exponential decay function that starts at the origin (0, 0) and decreases indefinitely as x increases. The function is defined for all real numbers, so the domain of f(x) is (-∞, +∞).

To know more about decay function, refer here:

https://brainly.com/question/30929439

#SPJ4

7. (-/1 Points] DETAILS Consider the following. U = 2i + 5j, v = 8i + 7j mer (a) Find the projection of u onto v. (b) Find the vector component of u orthogonal to v. (-/1 Points] DETAILS MY NOTES PRACTICE ANOT A car is towed using a force of 1400 newtons. The chain used to pull the car makes a 21° angle with the horizontal. Find the work done in towing the car 9 kilometers. (Round yo answer to one decimal place.) km-N Need Help? Read it Watch It

Answers

a)The projection of u onto v is approximately 3.62i + 3.15j and, b) the vector component of u orthogonal to v is -1.62i + 1.85j.

(a) Given vector u = 2i + 5j and vector v = 8i + 7j.

The projection of u onto v can be determined as follows:

Projection of u onto v = [(u.v) / (|v|²)] × v

where u.v represents the dot product of vectors u and v, and |v| represents the magnitude of vector v

Now, u.v = (2 × 8) + (5 × 7)

= 16 + 35 = 51|v|²

= (8²) + (7²)

= 64 + 49

= 113|v|

= √(113)

= 10.63

∴ Projection of u onto v = [(u.v) / (|v|²)] × v

= (51 / 113) × (8i + 7j)

= 3.62i + 3.15j

(b) To find the vector component of u orthogonal to v, we need to subtract the projection of u onto v from u. Thus, the vector component of u orthogonal to v can be determined as follows:

Vector component of u orthogonal to v = u - projection of u onto v

= 2i + 5j - (3.62i + 3.15j)

= (2 - 3.62)i + (5 - 3.15)j

= -1.62i + 1.85j

To know more about vector components

https://brainly.com/question/30426215

#SPJ11


Name all the equal vectors in the parallelogram shown.

Parallelogram A B C
D contains a point E at its center. Sides
A
B and D C are longer than
sides B
C and A D. There are eight
vectors: A
B, C B,

Answers

In the given parallelogram ABCD, the equal vectors are AB and CD.

A parallelogram is a quadrilateral with opposite sides parallel to each other. In this case, the given parallelogram is ABCD, and point E is located at its center. The sides AB and CD are longer than the sides BC and AD.

When we consider the vectors in the parallelogram, we can observe that AB and CD are equal vectors. This is because in a parallelogram, opposite sides are parallel and have the same length. In this case, AB and CD are opposite sides of the parallelogram and therefore have the same magnitude and direction.

The vector AB represents the displacement from point A to point B, while the vector CD represents the displacement from point C to point D. Since AB and CD are opposite sides of the parallelogram, they are equal in magnitude and direction. This property holds true for all parallelograms, ensuring that opposite sides are congruent vectors.

Learn more about parallelogram here:

https://brainly.com/question/32033686

#SPJ11

Suppose that ř'(t) = < 12t, e0.25t, vt > and 7(0) = < 2, 1, 5 > . Find F(t) e r(t) = =

Answers

The function F(t) depends on the specific value of v. Given that r'(t) = <12t, e^(0.25t), vt> and r(0) = <2, 1, 5>, we can find the function r(t) by integrating r'(t) with respect to t. The function F(t) will depend on the specific values of v and the integration constants.

To find the function r(t), we need to integrate each component of r'(t) with respect to t. Integrating the first component: ∫(12t) dt = 6t^2 + C1. Integrating the second component: ∫(e^(0.25t)) dt = 4e^(0.25t) + C2. Integrating the third component: ∫(vt) dt = (1/2)vt^2 + C3

Putting it all together, we have: r(t) = <6t^2 + C1, 4e^(0.25t) + C2, (1/2)vt^2 + C3>. Given that r(0) = <2, 1, 5>, we can substitute t = 0 into the components of r(t) and solve for the integration constants:

6(0)^2 + C1 = 2

4e^(0.25(0)) + C2 = 1

(1/2)v(0)^2 + C3 = 5

Simplifying the equations: C1 = 2, C2 + 4 = 1, C3 = 5

From the second equation, we find C2 = -3, and substituting it into the third equation, we find C3 = 5. Therefore, the function r(t) is: r(t) = <6t^2 + 2, 4e^(0.25t) - 3, (1/2)vt^2 + 5>

to know more about integration, click: brainly.com/question/31744185

#SPJ11

(q3) Find the x-coordinates of the points of intersection of the curves y = x3 + 2x and y = x3 + 6x – 4.

Answers

The x - coordinate of the point of intersection of the curves is

x = 1.

How to determine he points of intersection of the curves

To find the x-coordinates of the points of intersection of the curves

y = x³ + 2x and

y = x³ + 6x - 4  

we equate both equations and solve for x.

Setting the equations equal

x³ + 2x = x³ + 6x - 4  

2x = 6x - 4

Subtracting 6x from both sides

-4x = -4

Dividing both sides by -4, we find:

x = 1

Learn more about points of intersection at

https://brainly.com/question/29185601

#SPJ1

6. Determine if the function y = sin(x) is concave up when x = 10 radians? Show your work. (3 marks)

Answers

To determine if the function y = sin(x) is concave up at x = 10 radians, we need to analyze the second derivative of the function.

To determine the concavity of the function y = sin(x) at x = 10 radians, we first calculate the first derivative by finding dy/dx, which equals cos(x). Taking the derivative of cos(x), we find the second derivative.

Substituting x = 10 radians into the second derivative, we obtain the value.

The negative value of -0.544 indicates that the function y = sin(x) is concave up at x = 10 radians. This implies that the graph of the function is curving upward at that particular point.

Understanding the concavity of a function is crucial in analyzing its behavior and the shape of its graph. By evaluating derivatives and examining their signs, we can determine concavity and make inferences about the function's curvature. This information helps us gain insights into the overall behavior of the function.

To learn more about derivative here:

https://brainly.com/question/29144258

#SPJ11

Other Questions
1. If f(x) = 5x - 6x + 4x - 2, find f'(x) and f'(2). STATE all rules used. 1) choose the correct answer. which u.s. president boycotted the 1980 olympics to protest soviet aggression? A shop sells three brands of light bulb. Brand A bulbs last for 560 days each. Brand B bulbs last for 600 days each. Brand C bulbs last for 580 days each. Calculate the cost of 1 day's use for 1 bulb in each brand. Give your answers in pence to 3 dp. Write the brand that is best value in the comment box Urban sprawl has contributed to an increaseddependence on fossil fuels for which one of the following reasons?a. People are more likely to live in sparsely populated rural areas.b. People live in smaller homes, making them more likely to spend min their carsc. It spreads development beyond cities and makes people dependentautomobiles.d. It causes more people to live within city boundaries, placing extra spower grids. gregor company reports net income of $305,000 for the year ended december 31. it also reports $93,700 depreciation expense and a $10,000 loss on the sale of equipment. its comparative balance sheet reveals a $40,200 increase in accounts receivable, a $10,200 decrease in prepaid expenses, a $15,200 increase in accounts payable, a $12,500 decrease in wages payable, and a $100,000 decrease in notes payable. calculate the cash provided (used) in operating activities using the indirect method. group of answer choices $351,000 $371,400 $461,800 $381,400 the total cost of producing x units of a certain commodity is c(x) thousand dollars, where c(x)=x + 149x + 300. a.) Find A'(x), where A(x)= C(x)/xb.) For what values of A(x) increasing and decreasing.c.) For what level of production x is average cost minimized?d.) What is the minimum average cost? PLEASE HELP WITH THIS QUESTION Pls help asap I need help This mannitol salt plate was inoculated with an unknown Staphylococcus species. What can you conclude about this unknown organism?A. It can ferment mannitolB. It produces acid during fermentation, leading to a lower pH in the medium.C. It produces alcohol during fermentation, leading to a higher pH in the medium.D. It cannot ferment sugarsE. It can tolerate higher salt concentrations.F. It could be S. aureus. 80 points possible 2/8 answered Question 2 Previous Find the work done by the vector field F = (-2z, 3y, 2) in moving an object along C in the positive direction, where C is given by r(t) = (t, sin(t), cos(t)), 0 the swelling of tissues associated with hypernatremia is known as explain the difference between traditional and enterprise risk management elrod and ryder suggest some racial and class-related differences in arrest decisions can be attributed to . Which of the following situations is least likely to have free riders?a) Public goodsb) Common resourcesc) Private goodsd) Club goods 8. [ (x + sin x) cos a dr = ? x (a) (b) (c) (d) (e) x sin x - 2x cos x 2 sin x + - x sin x + 2x cos x + 2 sin x + x sin x - 2x cos x - 2 sin x - x sin x + 2x cos x - sin x + x sin x + 36. Label the following functions as f(x), f '(x), f '(x) and f'(x). [2 Marks] BONUS: 1. Find the anti derivative of: 3x2 + 4x + 12 [T: 1 Marks] according to research, it appears that people in the minority the norms of the dominant group and learn to be people in their own group. group of answer choices internalize; prejudiced against are prejudiced against; always tolerant of reject; accepting of externalize; critical of which factor primarily affects supply in the real estate market 1. [-11 Points] DETAILS LARCALC11 13.1.006. Determine whether z is a function of x and y. xz? + 3xy - y2 = 4 Yes NO Need Help? Read It 1-56.The owner of Universal Widgets has two teams of employees andwants to know which team is working the "best." The assistantmanager gathered data for the number of widgets made per teammember on various days. He presented the data to the owner astwo boxplots, shown at right. The owner is confused.a. Help the owner decide which team is working the "best"by comparing center, shape, spread, and outliers.b. Which team had a smaller standard deviation? Explain.20015010030Team I