- 240 V operating at 50.0 Ha. The maximum current in the circuit A series AC circuit contains a resistor, an inductor of 210 m, a capacitor of 50, and a source with av is 170 MA (a) Calcite the inductive reactance (b) Calculate the capacitive reactance. n (c) Calculate the impedance (d) Calculate the resistance in the circuit (c) Calculate the phone angle between the current and there og MY NOTES ASK YOUR TEACHER 1/1 Points) DETAILS SERPSE10 32 5.OP.012 A student has a 62.0 Hinductor 62. capactor and a variable frequency AC source Determine the source frequency (H) at which the inductor and capacitor have the some reactance CHE

Answers

Answer 1

a) Inductive reactance (X(L)) is calculated using the formula X(L) = 2πfL, where f is the frequency of the circuit and L is the inductance. Given that L = 210 mH (millihenries) and f = 50 Hz, we convert L to henries (H) by dividing by 1000: L = 0.21 H. Substituting these values into the formula, we have X(L) = 2π(50 Hz)(0.21 H) = 66.03 Ω.

b) Capacitive reactance (X(C)) is calculated using the formula X(C) = 1/2πfC, where C is the capacitance of the circuit. Given that C = 50 μF (microfarads) = 0.05 mF, and f = 50 Hz, we substitute these values into the formula: X(C) = 1/(2π(50 Hz)(0.05 F)) = 63.66 Ω.

c) Impedance (Z) is calculated using the formula Z = √(R² + [X(L) - X(C)]²). Given X(L) = 66.03 Ω, X(C) = 63.66 Ω, and Z = 240 V / 170 mA = 1411.76 Ω, we can rearrange the formula to solve for R: R = √(Z² - [X(L) - X(C)]²) = √(1411.76² - [66.03 - 63.66]²) = 1410.31 Ω.

d) The resistance of the circuit is found to be R = 1410.31 Ω.

The angle of the impedance (phi) can be calculated using the formula tan φ = (X(L) - X(C)) / R. Given X(L) = 66.03 Ω, X(C) = 63.66 Ω, and R = 1410.31 Ω, we find tan φ = (66.03 - 63.66) / 1410.31 = 0.0167. Taking the arctan of this value, we find φ ≈ 0.957°.

Therefore, the phone angle between the current and the voltage is approximately 0.957°.

To learn more about impedance, reactance, and related topics, you can visit the following link:

brainly.com/question/15561066

#SPJ11


Related Questions

(a) Find the distance of the image from a thin diverging lens of focal length 30 cm if the object is placed 20 cm to the right of the lens. Include the correct sign. cm (b) Where is the image formed?

Answers

The image is formed on the same side of the object.

Focal length, f = -30 cm

Distance of object from the lens, u = -20 cm

Distance of the image from the lens, v = ?

Now, using the lens formula, we have:

1/f = 1/v - 1/u

Or, 1/-30 = 1/v - 1/-20

Or, v = -60 cm (distance of image from the lens)

The negative sign of the image distance indicates that the image formed is virtual, erect, and diminished.

The image is formed on the same side of the object. So, the image is formed 60 cm to the left of the lens.

To learn more about image, refer below:

https://brainly.com/question/30725545

#SPJ11

A uniform, solid cylinder of radius 7.00 cm and mass 5.00 kg starts from rest at the top of an inclined plane that is 2.00 m long and tilted at an angle of 21.0∘ with the horizontal. The cylinder rolls without slipping down the ramp. What is the cylinder's speed v at the bottom of the ramp? v= m/s

Answers

The speed of the cylinder at the bottom of the ramp can be determined by using the principle of conservation of energy.

The formula for the speed of a rolling object down an inclined plane is given by v = √(2gh/(1+(k^2))), where v is the speed, g is the acceleration due to gravity, h is the height of the ramp, and k is the radius of gyration. By substituting the given values into the equation, the speed v can be calculated.

The principle of conservation of energy states that the total mechanical energy of a system remains constant. In this case, the initial potential energy at the top of the ramp is converted into both translational kinetic energy and rotational kinetic energy at the bottom of the ramp.

To calculate the speed, we first determine the potential energy at the top of the ramp using the formula PE = mgh, where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the ramp.

Next, we calculate the rotational kinetic energy using the formula KE_rot = (1/2)Iω^2, where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by I = (1/2)mr^2, where r is the radius of the cylinder.

Using the conservation of energy, we equate the initial potential energy to the sum of translational and rotational kinetic energies:

PE = KE_trans + KE_rot

Simplifying the equation and solving for v, we get:

v = √(2gh/(1+(k^2)))

By substituting the given values of g, h, and k into the equation, we can calculate the speed v of the cylinder at the bottom of the ramp.

To learn more about speed click here:

brainly.com/question/93357

#SPJ11

If a moon on Jupiter has 1/8 the mass of the Earth and 1/2 the Earth's radius, what is the acceleration of gravity on the planet's surface? The acceleration of gravity on Earth's surface is 10 m/s 1. 3 m/s 2
2. 1 m/s 2
3. 5 m/s2
4. 4 m/s 2
5. 2 m/s 2

Answers

The acceleration of gravity on planet's surface is 2 m/s^2.

The acceleration of gravity on a planet is directly proportional to its mass and inversely proportional to the square of its radius.

So, if the moon on Jupiter has 1/8 the mass of the Earth and 1/2 the Earth's radius, then the acceleration of gravity on its surface will be 1/8 * (1/4)^2 = 2 m/s^2.

Here is the formula for calculating the acceleration of gravity:

g = GM/r^2

where:

* g is the acceleration of gravity

* G is the gravitational constant

* M is the mass of the planet

* r is the radius of the planet

we have:

g = 6.674 * 10^-11 m^3/kg*s^2 * (1/8) * (5.972 * 10^24 kg)/(2)^2 = 2 m/s^2

Learn more about gravity with the given link,

https://brainly.com/question/557206

#SPJ11

The cars of a long coated by pulling them wider a happerom which also the of 10000 kg that the engine store op meg under the hopperendom Express your answering the significant figures

Answers

The given problem statement mentions a car with a long coat that is expanded by pulling them wider with a hopper weighing 10000 kg. Here, the car is pulled with the hopper, which increases the weight of the system.

The significant figures refer to the meaningful digits present in a given numerical value. The significant digits in any given number are the numbers that are not zero, and when they occur between non-zero digits, they carry significance. For example, 2.3 has two significant figures, and 120.03 has five significant figures.

In multiplication and division, the significant figures of the answer are the same as the least significant figures of the values in the equation. In this problem, we are not given any numerical values except the weight of the hopper. Thus, there is no significance of figures in this problem statement. Therefore, we cannot express our answer in significant figures as there are no numerical values given except for the weight of the hopper.

To know more about hopper visit:

https://brainly.com/question/30777831

#SPJ11

An electron has a rest mass m0​=9.11×10−31 kg. It moves with a speed v=0.700c. The speed of light in a vacuum c=3.00×108 m/s. An electron has a rest mass m0​=9.11×10−31 kg. It moves with a speed v=0.700c. The speed of light in a vacuum c=3.00×108 m/s. Part A - Find its relativistic mass. Part B - What is the total energy E of the electron? ∇ Part C What is the relativistic kinetic energy KE of the electron? Use scientific notations, format 1.234∗10n. Unit is Joules.

Answers

The problem involves an electron with a rest mass of m0​=9.11×10−31 kg moving with a speed v=0.700c, where c=3.00×108 m/s is the speed of light in a vacuum.

The goal is to calculate the relativistic mass of the electron (Part A), the total energy of the electron (Part B), and the relativistic kinetic energy of the electron (Part C).

Part A: The relativistic mass (m) of an object can be calculated using the formula m = m0 / sqrt(1 - v^2/c^2), where m0 is the rest mass, v is the velocity of the object, and c is the speed of light. Plugging in the given values, we can determine the relativistic mass of the electron.

Part B: The total energy (E) of the electron can be calculated using the relativistic energy equation, E = mc^2, where m is the relativistic mass and c is the speed of light. By substituting the previously calculated relativistic mass, we can find the total energy of the electron.

Part C: The relativistic kinetic energy (KE) of the electron can be determined by subtracting the rest energy (m0c^2) from the total energy (E). The rest energy is given by m0c^2, where m0 is the rest mass and c is the speed of light. Subtracting the rest energy from the total energy yields the relativistic kinetic energy.

Learn more about speed here: brainly.com/question/28224010

#SPJ11

What is the sound level of a sound wave with an intensity of 1.58 x 10-8 w/m2? O 158 dB O 15.8 dB O 42 dB O 4.2 dB

Answers

The sound level of the sound wave with an intensity of 1.58 x 10^-8 W/m^2 is 40 dB.

To calculate the sound level in decibels (dB) based on the intensity of a sound wave, we can use the formula:

L = 10 * log10(I/I0),

where L is the sound level in dB, I is the intensity of the sound wave, and I0 is the reference intensity, which is typically set at the threshold of hearing (I0 = 1 x 10^-12 W/m^2).

In this case, the intensity of the sound wave is given as 1.58 x 10^-8 W/m^2.

Plugging the values into the formula, we have:

L = 10 * log10((1.58 x 10^-8 W/m^2) / (1 x 10^-12 W/m^2)).

Simplifying the expression, we get:

L = 10 * log10(1.58 x 10^4) = 10 * 4 = 40 dB.

Therefore, the sound level of the sound wave with an intensity of 1.58 x 10^-8 W/m^2 is 40 dB.

To learn more about intensity

https://brainly.com/question/14349601

#SPJ11

Ronaldo kicked a ball with an initial speed of 12 ms-1 at 35o angle with the ball experienced a constant vertical acceleration of -9.81 ms-2.
a) Calculate the ball’s maximum height and distance.

Answers

The ball's maximum height is approximately 2.38 meters, and the horizontal distance it travels is approximately 6.86 meters.

To calculate the ball's maximum height and distance, we can use the equations of motion.

Resolve the initial velocity:

We need to resolve the initial velocity of 12 m/s into its vertical and horizontal components.

The vertical component can be calculated as V0y = V0 * sin(θ),

where V0 is the initial velocity and θ is the angle (35 degrees in this case).

V0y = 12 * sin(35) ≈ 6.87 m/s.

The horizontal component can be calculated as V0x = V0 * cos(θ),

where V0 is the initial velocity and θ is the angle.

V0x = 12 * cos(35) ≈ 9.80 m/s.

Calculate time of flight:

The time it takes for the ball to reach its maximum height can be found using the equation t = V0y / g, where g is the acceleration due to gravity (-9.81 m/s^2). t = 6.87 / 9.81 ≈ 0.70 s.

Calculate maximum height:

The maximum height (h) can be found using the equation h = (V0y)^2 / (2 * |g|), where |g| is the magnitude of the acceleration due to gravity.

h = (6.87)^2 / (2 * 9.81) ≈ 2.38 m.

Calculate horizontal distance:

The horizontal distance (d) can be found using the equation d = V0x * t, where V0x is the horizontal component of the initial velocity and t is the time of flight.

d = 9.80 * 0.70 ≈ 6.86 m.

Therefore, the ball's maximum height is approximately 2.38 meters, and the horizontal distance it travels is approximately 6.86 meters.

Learn more about distance from the given link,

https://brainly.com/question/26550516

#SPJ11

Single atomic ideal gas of 1.00 mol, volume 1.00 liters, temperature 27 ° C, and heated to a temperature of 227 ° C. The specific heat value for constant volume (Cv) is 12.5 Joule/mol-K. Lwin Calculate the following quantities:
a) (2 points) the ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing
b) (3 points) if this gas is heated by its volume unchanged. How much heat will be required?
c) (3 points) If this gas is heated by constant pressure. How much heat energy must be used more or less than item b)?

Answers

The ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing is given by the following formula.

Ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing = 1 + [tex][(3/2) (R) (T2 - T1) / E1][/tex]Here, R is the ideal gas constant which is [tex]8.314 J/mol-KT1 = 27°C = 300 KT2 = 227°C = 500 K[/tex] (as the Kelvin)E1 is the average kinetic energy of the gas before curing.

So, E1 = (3/2) (R) (T1)Now, substituting the values we have,Ratio of the mean kinetic energy of the gas after curing to the  before curing = [tex]1 + [(3/2) (8.314) (500 - 300) / {(3/2) (8.314) (300)}]≈ 1.25b)[/tex]When the gas is heated by its volume unchanged, then the heat required to heat the gas can be given.

To know more about kinetic visit:

https://brainly.com/question/999862

#SPJ11

Question 15 It is possible to totally convert a given amount of mechanical energy into heat True False

Answers

True, it is possible to totally convert a given amount of mechanical energy into heat.

According to the principle of conservation of energy, energy cannot be created or destroyed, but it can be converted from one form to another. Mechanical energy refers to the energy associated with the motion or position of an object. Heat, on the other hand, is a form of energy associated with the random motion of particles.

When mechanical energy is converted into heat, it is usually due to friction or other dissipative processes. Friction between objects or within systems can generate heat by converting the mechanical energy of their motion into thermal energy. This is commonly observed when objects rub against each other, producing heat as a result.

Additionally, other forms of mechanical energy, such as potential energy or kinetic energy, can also be converted into heat under appropriate conditions. For example, when an object falls from a height, its potential energy is converted into kinetic energy, and upon impact, some or all of this mechanical energy can be transformed into heat.

Therefore, it is possible to totally convert a given amount of mechanical energy into heat through processes such as friction and dissipative interactions.

To know more about mechanical energy refer here:

https://brainly.com/question/32458624#

#SPJ11

14) One-way mirror coating for "Slimy Joe's" used car dealership A window is made of glass that has an index of refraction of 1.75. It is to be coated with a thin film of a material whose index is 1.30. The purpose of the film is to reflect light having a wavelength of 532.0 nm back out into the lobby so he can see you (in the bright light) but you can't see him (in his dark lair of an office). Calculate the smallest positive thickness for this film.

Answers

The smallest positive thickness for the thin film coating is approximately 204.62 nm

To calculate the smallest positive thickness for the thin film coating that acts as a one-way mirror, we can use the concept of optical interference.

The condition for constructive interference for a thin film is given by:

2nt = (m + 1/2)λ

where:

- n is the index of refraction of the film material,

- t is the thickness of the film,

- m is an integer representing the order of the interference, and

- λ is the wavelength of light.

In this case, we want the film to reflect light with a wavelength of 532.0 nm. Therefore, we can rewrite the equation as:

2nt = (m + 1/2) * 532.0 nm

We are given the indices of refraction:

Index of refraction of the glass (n1) = 1.75

Index of refraction of the film (n2) = 1.30

To achieve the desired reflection, we need to consider the light traveling from the film to the glass, which experiences a phase change of 180 degrees. This means that the interference condition becomes:

2nt = (m + 1/2) * λ + λ/2

Substituting the values:

n1 = 1.75, n2 = 1.30, λ = 532.0 nm, and the phase change of 180 degrees:

2(1.30)t = (m + 1/2) * 532.0 nm + 266.0 nm

Simplifying the equation:

2.60t = (m + 1/2) * 532.0 nm + 266.0 nm

Let's assume the smallest positive thickness t that satisfies the condition is when m = 0.

2.60t = (0 + 1/2) * 532.0 nm + 266.0 nm

2.60t = 266.0 nm + 266.0 nm

2.60t = 532.0 nm

t = 532.0 nm / 2.60

t ≈ 204.62 nm

Therefore, the smallest positive thickness for the thin film coating is approximately 204.62 nm.

To learn more about light click here:

brainly.com/question/32390770

#SPJ11

9 7. The radius of the planet is R, and the mass of the planet , measured in meters is M. Micheal Caine is on a location very far from the planet, whearas Anne Hathway is standing on the surface of the planet. If Anne Hathway sees the clock of Micheal Caine, she sees that his clock is ticking N times as fast as her own clock. What is the ration of M/Rs.(6 marks).

Answers

This is the ratio of mass to radius for the given planet. This expression cannot be simplified further.Answer:M/R = (N² - 1)/N² * c²/G

Let the speed of Michael Caine's clock be k times that of Anne Hathaway's clock.So, we can write,k

= N .......(1)

Now, using the formula for time dilation, the time dilation factor is given as, k

= [1 - (v²/c²)]^(-1/2)

On solving the above formula, we get,v²/c²

= (1 - 1/k²) .....(2)

As Michael Caine is very far away from the planet, we can consider him to be at infinity. Therefore, the gravitational potential at his location is zero.As Anne Hathaway is standing on the surface of the planet, the gravitational potential at her location is given as, -GM/R.As gravitational potential energy is equivalent to time, the time dilation factor at Anne's location is given as,k

= [1 - (GM/Rc²)]^(-1/2) ........(3)

From equations (2) and (3), we can write,(1 - 1/k²)

= (GM/Rc²)So, k²

= 1 / (1 - GM/Rc²)

We know that, k

= N,

Substituting the value of k in the above equation, we get,N²

= 1 / (1 - GM/Rc²)

On simplifying, we get,(1 - GM/Rc²)

= 1/N²GM/Rc²

= (N² - 1)/N²GM/R

= (N² - 1)/N² * c²/GM/R²

= (N² - 1)/N² * c².

This is the ratio of mass to radius for the given planet. This expression cannot be simplified further.Answer:M/R

= (N² - 1)/N² * c²/G

To know more about radius visit:

https://brainly.com/question/13449316

#SPJ11

Two tractors are being used to pull a tree stump out of the ground. The larger tractor pulls with a force of 3000 to the east. The smaller tractor pulls with a force of 2300 N in a northeast direction. Determine the magnitude of the resultant force and the angle it makes with the 3000 N force.

Answers

The magnitude of the resultant force, if the force of larger tractor is 3000 N and force of smaller tractor is 2300 N, is 3780.1N and the angle it makes with the 3000N force is 38.7° to the northeast direction.

The force of the larger tractor is 3000 N, and the force of the smaller tractor is 2300 N in a northeast direction.

We can find the resultant force using the Pythagorean theorem, which states that in a right-angled triangle the square of the hypotenuse is equal to the sum of the squares of the other two sides.

Using the given values, let's determine the resultant force:

Total force = √(3000² + 2300²)

Total force = √(9,000,000 + 5,290,000)

Total force = √14,290,000

Total force = 3780.1 N (rounded to one decimal place)

The magnitude of the resultant force is 3780.1 N.

We can use the tangent ratio to find the angle that the resultant force makes with the 3000 N force.

tan θ = opposite/adjacent

tan θ = 2300/3000

θ = tan⁻¹(0.7667)

θ = 38.66°

The angle that the resultant force makes with the 3000 N force is approximately 38.7° to the northeast direction.

To learn more about magnitude: https://brainly.com/question/30337362

#SPJ11

17. (5 pts) The circular loop of wire below has a current of 5 A, going counterclockwise (with respect to the plane of the paper). The loop has a radius of 0.1 meters, and just has one turn (so N=1 ). Find the magnitude and direction of the induced magnetic field at the center of the loop.

Answers

The magnitude of the induced magnetic field at the center of the loop is zero, and its direction is undefined.

To find the magnitude and direction of the induced magnetic field at the center of the circular loop, we can use Ampere's law and the concept of symmetry.

Ampere's law states that the line integral of the magnetic field around a closed loop is equal to the product of the current enclosed by the loop and the permeability of free space (μ₀):

∮ B · dl = μ₀ * I_enclosed

In this case, the current is flowing counterclockwise, and we want to find the magnetic field at the center of the loop. Since the loop is symmetric and the magnetic field lines form concentric circles around the current, the magnetic field at the center will be radially symmetric.

At the center of the loop, the radius of the circular path is zero. Therefore, the line integral of the magnetic field (∮ B · dl) is also zero because there is no path for integration.

Thus, we have:

∮ B · dl = μ₀ * I_enclosed

Therefore, the line integral is zero, it implies that the magnetic field at the center of the loop is also zero.

To learn more about magnitude click here; brainly.com/question/30550744

#SPJ11

Consider a hydrogen atom placed in a region where is a weak external elec- tric field. Calculate the first correction to the ground state energy. The field is in the direction of the positive z axis ε = εk of so that the perturbation to the Hamiltonian is H' = eε x r = eεz where e is the charge of the electron.

Answers

To calculate the first correction to the ground state energy of a hydrogen atom in a weak external electric-field, we need to consider the perturbation to the Hamiltonian caused by the electric field.

The perturbation Hamiltonian is given by H' = eεz, where e is the charge of the electron and ε is the electric field strength. In first-order perturbation theory, the correction to the ground state energy (E₁) can be calculated using the formula:

E₁ = ⟨Ψ₀|H'|Ψ₀⟩

Here, Ψ₀ represents the unperturbed ground state wavefunction of the hydrogen atom.

In the case of the given perturbation H' = eεz, we can write the ground state wavefunction as Ψ₀ = ψ₁s(r), where ψ₁s(r) is the radial part of the ground state wavefunction.

Substituting these values into the equation, we have:

E₁ = ⟨ψ₁s(r)|eεz|ψ₁s(r)⟩

Since the electric field is in the z-direction, the perturbation only affects the z-component of the position operator, which is r = z.

Therefore, the first correction to the ground state energy can be calculated as:

E₁ = eε ⟨ψ₁s(r)|z|ψ₁s(r)⟩

To obtain the final result, the specific form of the ground state wavefunction ψ₁s(r) needs to be known, as it involves the solution of the Schrödinger equation for the hydrogen atom. Once the wavefunction is known, it can be substituted into the equation to evaluate the correction to the ground state energy caused by the weak external electric field.

To learn more about electric-field , click here : https://brainly.com/question/30544719

#SPJ11

Determine the maximum vertical height h which the rollercoaster will reach on the second slope. Include an FBD for the rollercoaster while it is ascending (going up) the slope on the right. Use conservation of energy.

Answers

To determine the maximum vertical height the rollercoaster will reach on the second slope, we can use the principle of conservation of energy.  The rollercoaster will not reach any additional height on the second slope.

Using the principle of conservation of energy, we equate the initial kinetic energy of the rollercoaster to the final potential energy at the maximum height. We assume negligible energy losses due to friction or air resistance.

1. Initial kinetic energy:

The rollercoaster's initial kinetic energy is given by

K = 1/2 * m * v^2, where

m is the mass of the rollercoaster  

v is its initial velocity.

2. Final potential energy:

At the maximum height, the rollercoaster's potential energy is given by

P = m * g * h, where

m is the mass

g is the acceleration due to gravity

h is the height.

Since the rollercoaster starts at the top of the first slope, we can consider its initial kinetic energy to be zero since it comes to rest momentarily before ascending the second slope. Therefore, we have:

0 = m * g * h

Solving for h, we find that the maximum vertical height the rollercoaster will reach on the second slope is h = 0.

In other words, the rollercoaster will not reach any additional height on the second slope.

To know more about kinetic energy, click here-

brainly.com/question/30107920

#SPJ11

Problem 2: Three 0.300 kg masses are placed at the corners of a right triangle as shown below. The sides of the triangle are of lengths a = 0.400 m, b = 0.300 m, and c = 0.500 m. Calculate the magnitude and direction of the gravitational force acting on m3 (the mass on the lower right corner) due to the other 2 masses only. (10 points) G = 6.67x10-11 N m²/kg? m 2 с. ma b b m3

Answers

We need to calculate the magnitude and direction of the gravitational force acting on m3 (the mass on the lower right corner) due to the other 2 masses only. To find we use concepts of gravity.

Given information:
Mass of each object, m = 0.300 kg
Length of sides of the triangle,
a = 0.400 m,
b = 0.300 m,
c = 0.500 m
Gravitational force constant, G = 6.67 x 10-11 N m²/kg

Now, we need to find out the magnitude and direction of the gravitational force acting on m3 (the mass on the lower right corner) due to the other 2 masses only. In order to calculate the gravitational force, we use the formula:

F = (G × m1 × m2) / r²

Where, F is the gravitational force acting on m3m1 and m2 are the masses of the objects r is the distance between the objects. Let's calculate the gravitational force between m1 and m3 first:

Using the above formula:

F1 = (G × m1 × m3) / r1²

Where,r1 is the distance between m1 and m3

r1² = (0.4)² + (0.3)²r1 = √0.25 = 0.5 m

Putting the values in the above equation:

F1 = (6.67 x 10-11 × 0.3²) / 0.5²

F1 = 1.204 x 10-11 N
Towards the right side of m1.

Now, let's calculate the gravitational force between m2 and m3: Using the formula:

F2 = (G × m2 × m3) / r2²
Where,r2 is the distance between m2 and m3

r2² = (0.3)² + (0.5)²r2 = √0.34 = 0.583 m

Putting the values in the above equation:

F2 = (6.67 x 10-11 × 0.3²) / 0.583²

F2 = 8.55 x 10-12 N
Towards the left side of m2

Net gravitational force acting on m3 is the vector sum of F1 and F2. Now, let's find out the net gravitational force using the Pythagorean theorem: Net force,

Fnet = √(F1² + F2²)

Fnet = √[(1.204 x 10-11)² + (8.55 x 10-12)²]

Fnet = 1.494 x 10-11 N

Direction: If θ is the angle between the net gravitational force and the horizontal axis, then

tanθ = (F2/F1)

θ = tan⁻¹(F2/F1)

θ = tan⁻¹[(8.55 x 10-12)/(1.204 x 10-11)]

θ = 35.4° above the horizontal (approximately)

Therefore, the magnitude of the gravitational force acting on m3 is 1.494 × 10-11 N and the direction is 35.4° above the horizontal.

to know more about Gravitational Force visit:

brainly.com/question/29190673

#SPJ11

A nichrome wire has thickness d=0.21mm and L= 0.58m. N=4148 turns to form a solenoid. A=5.7cm^2 and solenoid length= 26cm. The battery connected to the solenoid has V=48V and switch is for a while. What is B (magnetic field strength) inside the coil. Answer in mT in hundredth place

Answers

The magnetic-field strength (B) inside the solenoid coil is approximately 7.88 mT.

To calculate the magnetic field strength, we can use the formula:

B = (μ₀ * N * I) / L

Where:

B is the magnetic field strength,

μ₀ is the permeability of free space (constant),

N is the number of turns in the solenoid,

I is the current flowing through the solenoid, and

L is the length of the solenoid.

First, let's calculate the current (I) flowing through the solenoid using Ohm's law:

V = I * R

Where:

V is the battery voltage and

R is the resistance of the nichrome wire.

The resistance of the wire can be calculated using the formula:

R = (ρ * L) / A

Where:

ρ is the resistivity of the nichrome wire and

A is the cross-sectional area of the wire.

Now, substituting the values into the formulas, we can calculate the magnetic field strength (B).

To learn more about magnetic-field , click here : https://brainly.com/question/19542022

#SPJ11

A tank of compressed air of volume 1.00 m3 is
pressurized to 28.0 atm at T = 273 K. A valve is opened,
and air is released until the pressure in the tank is 14.9 atm. How
many molecules were released?

Answers

2.939 × 10²⁴ molecules were released from the tank. We use the ideal gas law equation to determine the number of molecules released.

To determine the number of molecules released when the air pressure in a tank is reduced, we can use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

PV = nRT

28.0 atm = [tex]28.0 \times 1.01325 \times 10^5 Pa = 2.8394 \times 10^6 Pa[/tex]

14.9 atm = [tex]14.9 \times 1.01325 \times 10^5 Pa = 1.5077 \times 10^6 Pa[/tex]

1.00 m³ = 1000 liters

T = 273 K

Using the ideal gas law to calculate the initial number of moles:

[tex]n_1 = (P_1 \times V) / (R \times T)\\ = (2.8394 \times 10^6 Pa \times 1000 L) / (8.314 J/(mol \cdot K) \times 273 K)\\= 128.76 mol[/tex]

[tex]n_2 = (P_2 \times V) / (R \times T) \\= (1.5077 \times 10^6 Pa \times 1000 L) / (8.314 J/(mol \cdot K)\times 273 K) \\ = 79.93 mol[/tex]

Number of moles = 128.76 mol - 79.93 mol = 48.83 mol

Number of molecules

[tex]= 48.83 mol \times 6.0221 \times 10^{23} molecules/mol\\ \approx 2.939 \times 10^24 molecules[/tex]

Therefore, approximately 2.939 × 10²⁴ molecules were released from the tank.

Learn more about the ideal gas equation here:

https://brainly.com/question/11544185

#SPJ11

Which of the following statements correctly describes the relationship between an object's gravitational potential energy and its height above the ground?
proportional to the square of the object's height above the ground
directly proportional to the object's height above the ground
inversely proportional to the object's height above the ground
proportional to the square root of the object's height above the ground
An archer is able to shoot an arrow with a mass of 0.050 kg at a speed of 120 km/h. If a baseball of mass 0.15 kg is given the same kinetic energy, determine its speed.
A 50 kg student bounces up from a trampoline with a speed of 3.4 m/s. Determine the work done on the student by the force of gravity when she is 5.3 m above the trampoline.

Answers

The correct statement describing the relationship between an object's gravitational potential energy and its height above the ground is that it is directly proportional to the object's height above the ground.

Gravitational potential energy is the energy an object possesses due to its position in a gravitational field. As an object is raised higher above the ground, its potential energy increases. This relationship is linear and follows the principle of work done against gravity. When an object is lifted vertically, the work done is equal to the force of gravity multiplied by the vertical displacement. Since the force of gravity is constant near the Earth's surface, the potential energy is directly proportional to the height.

The kinetic energy (KE) of an object is given by the equation:

KE = (1/2) × mass × velocity^2

Let's denote the velocity of the baseball as v. We know the mass of the baseball is 0.15 kg, and the kinetic energy of the arrow is equal to the kinetic energy of the baseball. Therefore, we can write:

(1/2) × 0.050 kg × (120 km/h)^2 = (1/2) × 0.15 kg × v^2

First, we need to convert the velocity of the arrow from km/h to m/s by dividing it by 3.6:

(1/2) × 0.050 kg × (120,000/3.6 m/s)^2 = (1/2) × 0.15 kg × v^2

Simplifying the equation gives:

0.050 kg × (120,000/3.6 m/s)^2 = 0.15 kg × v^2

Solving for v, we can find the speed of the baseball.

To determine the work done on the student by the force of gravity, we can use the formula:

Work = Force * displacement * cos(theta)

In this case, the force of gravity is equal to the weight of the student, which can be calculated as mass_student * acceleration due to gravity. Given that the student's mass is 50 kg and the displacement is 5.3 m, we can substitute these values into the equation:

Work = (50 kg) * (9.8 m/s^2) * (5.3 m) * cos(180 degrees)

Since cos(180 degrees) = -1, the negative sign indicates that the force of gravity acts in the opposite direction of displacement.

Now, we can perform the calculation:

Work = (50 kg) * (9.8 m/s^2) * (5.3 m) * (-1)

The result will give us the work done on the student by the force of gravity when she is 5.3 m above the trampoline.

To learn more about gravitational potential, click here:https://brainly.com/question/29020626

#SPJ11

17) A 5.0-Volt battery is connected to two long wires that are wired in parallel with one another. Wire "A" has a resistance of 12 Ohms and Wire "B" has a resistance of 30 Ohms. The two wires are each 1.74m long and parallel to one another so that the currents in them flow in the same direction. The separation of the two wires is 3.5cm. What is the current flowing in Wire "A" and Wire "B"? What is the magnetic force (both magnitude and direction) that Wire "B experiences due to Wire "A"?

Answers

The current flowing in Wire "A" can be calculated using Ohm's Law, which states that current (I) is equal to voltage (V) divided by resistance (R).

The current in Wire "B" can be calculated using the same formula. The magnetic force experienced by Wire "B" due to Wire "A" can be determined using the formula for the magnetic force between two parallel conductors.

Voltage (V) = 5.0 V

Resistance of Wire "A" (R_A) = 12 Ω

Resistance of Wire "B" (R_B) = 30 Ω

Length of the wires (L) = 1.74 m

Separation between the wires (d) = 3.5 cm = 0.035 m

1. Calculating the currents in Wire "A" and Wire "B":

Using Ohm's Law: I = V / R

Current in Wire "A" (I_A) = 5.0 V / 12 Ω

Current in Wire "B" (I_B) = 5.0 V / 30 Ω

2. Calculating the magnetic force experienced by Wire "B" due to Wire "A":

The formula for the magnetic force between two parallel conductors is given by:

F = (μ₀ * I_A * I_B * L) / (2πd)

Where:

μ₀ is the permeability of free space (4π x 10^(-7) T·m/A)

I_A is the current in Wire "A"

I_B is the current in Wire "B"

L is the length of the wires

d is the separation between the wires

Substituting the given values:

Magnetic force (F) = (4π x 10^(-7) T·m/A) * (I_A) * (I_B) * (L) / (2πd)

Now, plug in the values of I_A, I_B, L, and d to calculate the magnetic force.

To know more about Ohm's Law refer here:

https://brainly.com/question/1247379?#

#SPJ11

We have a rare sample of Unobtainium which has a half life of 54
hours and is currently measuring 1440 uCi. How radioactive will it
be in 18 days?

Answers

The given sample of Unobtainium has a half-life of 54 hours and is currently measuring 1440 uCi. The problem is asking us to determine how radioactive the sample will be in 18 days.

To solve the given problem, we will first find the decay constant using the half-life formula, which is given as follows:Half-life (t1/2) = 0.693/λWhere λ is the decay constant.To find λ, we will rearrange the above formula as follows:

λ = 0.693/t1/2λ = 0.693/54λ

= 0.01283 per hourThe decay constant of the given Unobtainium sample is 0.01283 per hour.

Now, we will use the exponential decay formula to find the radioactive decay of the sample in 18 days. The formula is given as:A = A0 e-λtWhere A is the current activity of the sample, A0 is the initial activity of the sample, e is the mathematical constant, t is the time elapsed, and λ is the decay constant.We know that the current activity of the sample (A) is 1440 uCi and that we need to find its activity after 18 days. We can convert 18 days into hours by multiplying it by 24 as follows:

18 days × 24 hours/day =

432 hours

Now, we will substitute the given values into the exponential decay formula and solve for A

:A = A0 e-λtA =

1440 e-0.01283(432)A ≈

43.85 uCi

Therefore, the sample of Unobtainium will be radioactive at a rate of approximately 43.85 uCi after 18 days.

To know more about radioactive visit:

https://brainly.com/question/1770619

#SPJ11

- Aldiffraction grating has 2000 lines per centimeter. At what angle will the third-order maximum (m 3) be for 520 nm wavelength green light? 1 nm = 1 x 10-nm, 1 cm=1 x 10-2 m. O 12.20 0 14.20 O 16.2 O 18.2°

Answers

The angle at which the third-order maximum (m = 3) will be observed for 520 nm wavelength green light is 16.2° (option C).

The expression to calculate the angular position of a given-order diffraction maximum is: Sin θ = (mλ)/a, Where, λ = wavelength of light, a = line spacing and m = order of the maximum.

So the given problem is of diffraction grating with line spacing 'a' of 2000 lines/cm for a green light with a wavelength of 520 nm. Using the above expression, the angle (θ) can be calculated as follows:

Sin θ = (mλ)/a => θ = sin⁻¹((mλ)/a)

Where, λ = 520 nm = 520 x 10⁻⁹ m and a = 1/2000 cm = 5 x 10⁻⁵ m. Third-order maximum (m = 3),

θ = sin⁻¹((3λ)/a)θ = sin⁻¹((3 × 520 x 10⁻⁹ m)/(5 x 10⁻⁵ m))

θ = 16.2°

Hence, option C is the correct answer.

To know more about wavelength click on below link :

https://brainly.com/question/31322456#

#SPJ11

If you double an object's velocity, its kinetic energy increases by a factor of four. True False

Answers

True. Doubling an object's velocity increases its kinetic energy by a factor of four.

The relationship between kinetic energy (KE) and velocity (v) is given by the equation [tex]KE=\frac{1}{2}*m * V^{2}[/tex]

where m is the mass of the object. According to this equation, kinetic energy is directly proportional to the square of the velocity. If we consider an initial velocity [tex]V_1[/tex], the initial kinetic energy would be:

[tex]KE_1=\frac{1}{2} * m * V_1^{2}[/tex].

Now, if we double the velocity to [tex]2V_1[/tex], the new kinetic energy would be [tex]KE_2=\frac{1}{2} * m * (2V_1)^2 = \frac{1}{2} * m * 4V_1^2[/tex].

Comparing the initial and new kinetic energies, we can see that [tex]KE_2[/tex] is four times larger than [tex]KE_1[/tex]. Therefore, doubling the velocity results in a fourfold increase in kinetic energy.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ11

Use the parallelogram rule (learned in the tutorials) to solve the following problem:
(utt - Uxx = 0, 0 0
u(x, 0) = sin² (x), x≥0
u(x, 0) = sin(x), x≥0
u(0,t) = t, t≤0
It is recommended that you first explicitly write the parallelogram rule, and only then use it.

Answers

The solution is:[tex]u(x, t) = t + (1/2)(sin^2 (x + t) + sin^2 (x - t)) + (1/2)sin(x)^2t + ... + R(h, k, x, t)[/tex]

Using the Parallelogram rule, we solve the initial-boundary value problem (IBVP) [tex]u_t_t - U_x_x = 0, 0 \leq x \leq \pi /2, t \leq 0[/tex] with boundary conditions [tex]u(x, 0) = sin^2 (x)[/tex], [tex]u(x, 0) = sin(x)[/tex], [tex]u(0,t) = t[/tex]

We substitute the initial conditions [tex]u(x, 0) = sin^2 (x)[/tex], [tex]u(x, 0) = sin(x)[/tex], and [tex]u(0, t) = t[/tex] into the formula to get the solution.

[tex]u(x, t)[/tex] = [tex]t + (1/2)(sin^2 (x + t) + sin^2 (x - t)) + (1/2)sin(x)^2t + [(1/12)sin^4(x + t) + (1/12)sin^4(x - t)]t^2 + [(1/720)sin^6(x + t) + (1/720)sin^6(x - t)]t^3 + R(h, k, x, t)[/tex] where [tex]R(h, k, x, t)[/tex] denotes the remainder of the Taylor expansion of the exact solution.

Learn more about Parallelogram rule here:

https://brainly.com/question/28251509

#SPJ11

Can an object have increasing speed while its acceleration is decreasing? if yes, support your answer with an example.

Answers

Yes, an object can have increasing speed while its acceleration is decreasing. One example is a car accelerating forward while gradually releasing the gas pedal.

The rate of change of velocity is said to be decreasing with time if the acceleration is decreasing. This does not exclude the object's speed from increasing, though.

Consider an automobile that is starting moving at a speed of 10 m/s as an illustration. The driver gradually releases the gas pedal, causing the car's acceleration to decrease. The car continues to accelerate but at a decreasing rate.

Although the car's acceleration is reducing during this period, the speed might still rise. Even if the rate of acceleration is falling, the car's speed can still rise as it accelerates less, reaching 20 m/s, for instance.

Therefore, an object can indeed have increasing speed while its acceleration is decreasing, as demonstrated by the example of a car gradually releasing the gas pedal.

To know more about acceleration, visit,

https://brainly.com/question/460763

#SPJ4

An engine has efficiency of 15% as it absorb 400 J of heat from higher temperature region. How much extra heat should it dissipates to lower temperature reservoir to make efficiency of this engine

Answers

we cannot solve for the required extra heat to dissipate without knowing the temperatures T1 and T2.

Given:

Efficiency of the engine (η) = 15%

Heat absorbed from a higher temperature region = 400 J

Let Q be the extra heat that the engine should dissipate to a lower temperature reservoir to achieve the desired efficiency.

Using the formula for efficiency:

Efficiency (η) = Work done / Heat absorbed

The heat engine transfers heat from a high-temperature region to a low-temperature region, producing work in the process.

Substituting the given values:

η = 15/100

Heat absorbed = 400 J

Work done by the engine = η × Heat absorbed

Work done = (15/100) × 400 J = 60 J

The efficiency equation can be written as:

η = 1 - T2/T1

Where T1 is the temperature of the high-temperature reservoir and T2 is the temperature of the low-temperature reservoir.

We are given the work done by the engine (60 J) but not the temperatures T1 and T2.

Therefore, we cannot solve for the required extra heat to dissipate without knowing the temperatures T1 and T2.

Learn more about Heat Dissipation:

https://brainly.com/question/33288165

#SPJ11

Watching a transverse wave pass by, a woman in a boat notices that 15 crests pass by in 4.2 seconds. If she measures a distance of 0.8 m between two successive crests and the first point and the last point are crests, what is the speed of the wave?

Answers

The speed of the wave is 2.86 m/s.

In summary, to calculate the speed of the wave, we need to use the formula:

Speed = distance / time

The distance between two successive crests is given as 0.8 m, and the time taken for 15 crests to pass by is 4.2 seconds. By dividing the distance by the time, we can determine the speed of the wave.

To explain further, we can calculate the distance traveled by the wave by multiplying the number of crests (15) by the distance between two successive crests (0.8 m). This gives us a total distance of 12 m.

Dividing this distance by the time taken (4.2 seconds), we find the speed of the wave to be approximately 2.86 m/s.

Learn more about Speed here:

brainly.com/question/14126043

#SPJ11

Moving at its maximum safe speed, an amusement park carousel takes 12 S to complete a revolution. At the end of the ride, it slows down smoothly, taking 3.3 rev to come to a stop. Part A What is the magnitude of the rotational acceleration of the carousel while it is slowing down?

Answers

The magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s². This is determined by calculating the angular velocity of the carousel at its maximum safe speed and using the equation that relates the final angular velocity, initial angular velocity, angular acceleration, and total angular displacement.

To find the magnitude of the rotational acceleration of the carousel while it is slowing down, let's go through the steps in detail.

We have,

Time taken for one revolution (T) = 12 s

Total angular displacement (θ) = 3.3 rev

⇒ Calculate the angular velocity (ω) of the carousel at its maximum safe speed.

Using the formula:

Angular velocity (ω) = 2π / T

ω = 2π / 12

ω = π / 6 rad/s

⇒ Determine the angular acceleration (α) while the carousel is slowing down.

Using the equation:

Final angular velocity (ω_f)² = Initial angular velocity (ω_i)² + 2 * Angular acceleration (α) * Total angular displacement (θ)

Since the carousel comes to a stop (ω_f = 0) and the initial angular velocity is ω, the equation becomes:

0 = ω² + 2 * α * (2π * 3.3)

Simplifying the equation, we have:

0 = (π/6)² + 2 * α * (2π * 3.3)

0 = π²/36 + 13.2πα

⇒ Solve for the angular acceleration (α).

Rearranging the equation, we get:

π²/36 = -13.2πα

Dividing both sides by -13.2π, we obtain:

α = -π/36

The magnitude of the rotational acceleration is given by the absolute value of α:

|α| = π/36 rad/s²

Therefore, the magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s².

To know more about rotational acceleration, refer here:

https://brainly.com/question/30238727#

#SPJ11

4. (1 p) A generator A uses a magnetic field of 0.10 T and the area in its winding is 0.045 m2. Generator B has a winding area of ​​0.015 m2. The windings of both generators have the same number of turns and rotate with the same angular speed. Calculate the magnitude of the magnetic field that must be used in generator B so that its maximum emf is the same as that of generator A.

Answers

The magnitude of the magnetic field that must be used in generator B so that its maximum emf is the same as that of generator A is 0.30 T.

Generator A has magnetic field strength, B1 = 0.10 T Area of winding, A1 = 0.045 m² Number of turns, N1 = N2 Angular speed, ω1 = ω2EMF of generator A, ε1 = ?

Does Generator B have magnetic field strength, B2 = ? Area of winding, A2 = 0.015 m² EMF of generator B, ε2 = ε1 From Faraday’s Law of Electromagnetic Induction, we know that:ε = N Δ Φ/Δ t

Where;ε = Electromotive Force in volts

N = Number of turnsΔ

Φ = Change in magnetic fluxΔ

t = Time takenThe magnteic flux is given as; Φ = B A

Therefore,ε = N Δ Φ/Δ tε = N B Δ A/Δ t

Generator A and Generator B have the same number of turns and rotate with the same angular speed. Thus the time taken by both generators is the same. Maximum emf will be produced by each generator when the change in flux is maximum.Substituting the values given for Generator A,N = N1Δ A = A1ω = ω1ε = ε1B = B1ε1 = N1 B1 A1 ω1…………..eqn. (1)To find the magnetic field strength, B2 of generator B, we’ll use equation (1) as follows:

ε2 = N2 B2 A2 ω1Since ε1 = ε2ε1 = N1 B1 A1 ω1ε2 = N2 B2 A2 ω1

Therefore, N1 B1 A1 ω1 = N2 B2 A2 ω1B2 = B1 (A1 N1) / (A2 N2) = 0.10 x 0.045 / 0.015 = 0.30 T

Generator A and Generator B are two separate electrical generators with different magnetic field strengths and winding areas. The magnetic field strength of Generator A is B1 = 0.10 T and the area of its winding is A1 = 0.045 m². On the other hand, Generator B has a winding area of A2 = 0.015 m². The number of turns in both the windings is the same and they rotate with the same angular speed.

We need to find the magnetic field strength of Generator B when the maximum emf produced by Generator B is equal to the maximum emf produced by Generator A. The maximum emf is produced when the change in magnetic flux is maximum. The magnetic flux is given by Φ = B A, where B is the magnetic field strength and A is the area of the winding. The change in magnetic flux is given by Δ Φ = B Δ A.

Using Faraday's Law of Electromagnetic Induction, ε = N Δ Φ/Δ t, where ε is the emf produced, N is the number of turns, Δ Φ is the change in magnetic flux and Δ t is the time taken. The time taken by both generators is the same since they rotate with the same angular speed. Hence, ε1 = N1 B1 A1 ω1 and ε2 = N2 B2 A2 ω1.

Since the maximum emf produced by both generators is equal, ε1 = ε2.Substituting the values given in the problem statement, we get; N1 B1 A1 ω1 = N2 B2 A2 ω1

Rearranging the equation, B2 = B1 (A1 N1) / (A2 N2) = 0.10 x 0.045 / 0.015 = 0.30 TTherefore, the magnitude of the magnetic field that must be used in Generator B so that its maximum emf is the same as that of Generator A is 0.30 T.

To obtain the same maximum emf as generator A, generator B should have a magnetic field strength of 0.30 T. This can be achieved by adjusting the winding area of generator B, as both generators have the same number of turns and rotate with the same angular speed.

To know more about Electromagnetic Induction visit

brainly.com/question/32444953

#SPJ11

Consider a volume current density () in a conducting system where the charge density p() does not change with time. Determine V.J(7). Explain your answer.

Answers

The volume current density for a conducting system where the charge density p() does not change with time is given by J(t) = J0exp(i * 7t), where J0 is the maximum current density and t is the time.

However, we want to determine V.J(7), which means we need to find the value of the current density J at a particular point V in the system. Therefore, we need more information about the system to be able to calculate J(7) at that point V.

Learn more about charge density: https://brainly.com/question/14306160

#SPJ11

Other Questions
Match each point of view with its definition.MatchTermFirst personSecond personThird person limitedThird person omniscientDefinitionA) She is excited to embark on this new journey. She's never had a dog before, andcan't wait to watch him grow.B) The girl walks in with her new puppy, feeling overjoyed. The puppy questions hisnew home and misses the rest of his litter.C) I am so excited to bring home my new puppy. I can't wait to teach him tricks andwatch him grow.D) You bring home your new puppy. You automatically feel an inseparable bond. What is the expansionary and contractionary fiscal policy forthe truck driving industry?Subject is macroeconomics What is the speed parameter if the Lorentz factor y is (a) 1.0279127, (b) 7.7044323, (c) 138.79719, and (d) 978.83229? When Tiger was a puppy, he would jump excitedly on anyone who entered the house; receiving praise for his actions. Now that Tiger weighs 65 pounds, Tiger's owner has asked everyone who enters the house to ignore the dog until he settles down. This scenario illustrates the use of ____.a.extinctionb.discriminationc.generalizationd.latent inhibition Ethical egoism claims thatQuestion 16 options:altruism is a form of disguised egoismlife is nasty brutish and shortwe should always act in our own self-interestpeople do in fact act selfishlyAccording to Shafer-Landau, how might an action bring about more happiness than any other alternative, but still fail to be optimific?(Include both ways discussed in the reading.) You want to dissolve some sugar cubes as quickly as possible in a cup of tea. Suggest two ways you can do that. Consider a consumer with the utility function u(x, x_2) = ln(x) + x2 and the budget constraint Px+ P_2x_2 = m. Derive the consumer's demand functions for x, and x_2. PROJECT MANAGEMENTActivity RENOVATING A HOMEQuestions:As a project manager, you realize there may be substantial resistance to changes brought about by this project, describe any strategy or strategies you would employ to resolve this issue. (Make mention of any group from which this resistance may originate.)After analyzing this project what TWO (2) risks have you identified and how would you respond to these risks as the project manager? The commonwealth system involved governmental support of corporate activity which, ideally, should be used to promote social welfare. + True False 1. The Pygmalion Effect is a phenomenon associated with the leaders perception of the team and whether or not the desired outcomes are fulfilled. a) True b) False. 2. One of the benefits of Authoritative coaching style would include the view that it is efficient and decisive. a) True b) False. 3. A role on a team is a set of behaviors that are expected from the occupants of specific positions within the group. Teams rarely have roles for players other then their captains. a) True b) False 3. (8pts) Two charged particles are arranged as shown. a. (5pts) Find the electric potential at P1 and P2. Use q=3nC and a=1 m highest energy level (ionised) - If an electron absorbs this much energy, it escapes from the atom, and the atom is ionised. lowest energy level. (normal state) The image represents the allowed electr DementiaHow can we use reminiscence and life review, memory training,and support groups to alleviate social and cognition-relatedsymptoms of persons with dementia? In a cash against documents transaction:The draft is payable on presentation to the drawer by the remitting bank.The draft is payable on presentation to the drawee by the presenting bank.The draft is payable on presentation to the drawee by the remitting bank.The draft is payable on presentation to the drawer by the presenting bank. Where was the first hydrothermal vent discovered? mid-atlantic ridge east pacific rise gulf of mexico sea of cortez juan de fuca ridge A monochromatic X-ray, with an initial wavelength of 40 pm undergoes Compton scattering through an angle of 40. Find the wavelength of the scattered X-ray. According to Bonilla-Silva, which frame is the most common in contemporary society? Flag question O a. Minimization of racism O b. Cultural racism O c. Naturalization frame O d. Abstract liberalism second party cookies are available to : second party cookies are available to : the website that collects them and affiliates available to just the website that collects them there are only 1st and 3rd party cookies available to anyone who uses the cookie collection software Let V, W be finite dimensional vector spaces, and suppose that dim(V)=dim(W). Prove that a linear transformation T : V W is injective it is surjective. O Describe the similarities and differences between prokaryotic and eukaryotic cells. O Which microorganism is considered acellular, and why? O It was discovered that resident microbial communities inhibit growth and antibiotic-resistance evolution of Escherichia coli in human gut microbiome samples. This is an example of what microbiological phenomena or effect? Steam Workshop Downloader