3x² dx a) Find a formula to approximate the above integral using n subintervals and using Right Hand Rule. (enter a formula involving n alone). b) Evalute the formula using the indicated n values. n

a. The mean value of the number of students who want a new copy is 7.5, and the standard deviation is 2.45.

To calculate the mean value, we multiply the total number of students (25) by the probability of wanting a new copy (30% or 0.3), resulting in 7.5. The standard deviation can be found using the formula for the standard deviation of a binomial distribution: √(np(1-p)), where n is the total number of trials (25) and p is the probability of success (0.3). After calculations, the standard deviation is approximately 2.45.

b. To find the probability that the number of students who want new copies is more than two standard deviations away from the mean, we need to calculate the z-score and look up the corresponding probability in the standard normal distribution table. However, since the number of students who want new copies is discrete, we need to consider the probability of having more than 9 students wanting new copies (mean + 2 standard deviations).

Using the z-score formula, the z-score is (9 - 7.5) / 2.45 ≈ 0.61. Looking up this z-score in the standard normal distribution table, we find that the probability is approximately 0.2676. Therefore, the probability that the number of students who want new copies is more than two standard deviations away from the mean is 0.2676.

c. To find the probability that all 25 people will get the type of book they want from the current stock, we need to consider the probability of each individual getting what they want. Let X be the number of people who want a new copy. For everyone to get what they want, X should be between 0 and 15 (inclusive). The probability of each individual getting what they want is 0.3 for those who want new copies and 0.7 for those who want used copies.

We can use the binomial probability formula to calculate the probability for each value of X between 0 and 15, and then sum up those probabilities. The final probability is the sum of the individual probabilities: P(X = 0) + P(X = 1) + ... + P(X = 15). After calculations, the probability that all 25 people will get the type of book they want from the current stock is approximately 0.0016.

d. The expected value of total revenue from the sale of the next 25 copies purchased can be calculated by considering the revenue generated from each type of purchase (new or used) and the corresponding probabilities.

Let h(X) be the revenue when X out of the 25 purchasers want new copies. The revenue for each purchase can be calculated by multiplying the price of the book by the number of purchasers who want that type of book. The expected value of total revenue is then the sum of h(X) multiplied by the probability of X for all possible values of X.

Using the given prices, the expected value of total revenue can be expressed as: h(X) = (100 * X) + (70 * (25 - X)). We need to calculate the expected value E[h(X)] by summing up h(X) multiplied by the probability of X for all possible values of X (from 0 to 25). After calculations, the expected value of total revenue from the next 25 copies purchased is approximately $1,875.

Learn more about probability here: https://brainly.com/question/32117953

#SPJ11

x - x₀ = 1(y - y₀) = z - z₀ is the set of symmetric equations for the line. The parametric equations describe the line by giving the coordinates of any point on the line as a function of the parameter t.

To find the parametric equations and symmetric equations for the line, we first need to determine the direction vector of the line.

The given line is parallel to the line x + 3 = y/2 = z - 4. To obtain the direction vector, we can take the coefficients of x, y, and z, which are 1, 1/2, and 1, respectively. So, the direction vector of the line is d = <1, 1/2, 1>.

Next, we can use the point-slope form of a line to find the parametric equations. Taking the given point (1, -4, 5) as the initial point, the parametric equations are:

x = 1 + t

y = -4 + (1/2)t

z = 5 + t

These equations describe the position of any point on the line as a function of the parameter t.

For the symmetric equations, we can use the direction vector to form a set of equations. Let (x₀, y₀, z₀) be the coordinates of any point on the line, and (x, y, z) be the variables:

(x - x₀)/1 = (y - y₀)/(1/2) = (z - z₀)/1

To simplify, we have:

x - x₀ = 1(y - y₀) = z - z₀

This is the set of symmetric equations for the line.

In conclusion, the parametric equations describe the line by giving the coordinates of any point on the line as a function of the parameter t. The symmetric equations represent the line using a set of equations involving the variables x, y, and z. Both sets of equations provide different ways to express the line and describe its properties.

To know more about parametric equations refer here:

https://brainly.com/question/28495359#

#SPJ11

The expected number of candies your colleague consumes in the afternoon is 1.5.

The expected number of candies that your colleague consumes in the afternoon can be calculated using the fitted geometric distribution and the maximum likelihood estimation.

In this case, the data shows that out of the 21 workdays observed, your colleague consumed 1 candy on 14 days and 2 or more candies on 7 days.

The geometric distribution models the number of trials needed to achieve the first success, where each trial has a constant probability of success. In this context, a "success" is defined as consuming 1 candy.

To calculate the expected number of candies, we use the formula for the mean of a geometric distribution, which is given by the reciprocal of the success probability. In this case, the success probability is the proportion of days where your colleague consumed only 1 candy, which is 14/21 or 2/3.

Therefore, the expected number of candies your colleague consumes in the afternoon can be calculated as 1 / (2/3) = 3/2, which is 1.5 candies.

Learn more about geometric distribution here:

https://brainly.com/question/30478452

#SPJ11

Given that rectangles H and K are similar, and we have the dimensions of rectangle H , The area of rectangle K is approximately 225 square centimeters.

Let's denote the dimensions of rectangle K as Lk and Wk, representing its length and width, respectively.

Using the concept of similarity, we know that corresponding sides of similar rectangles are proportional. In this case, the ratio of the width of rectangle K (Wk) to the width of rectangle H (Wh) is equal to the ratio of the length of rectangle K (Lk) to the length of rectangle H (Lh).

We can set up the following proportion:

Wk / Wh = Lk / Lh

Substituting the given values:

Wk / 5cm = Lk / 8cm

Now, we can use the information provided to find the dimensions of rectangle K. It is given that the width of rectangle H is 5cm and the width of rectangle H is 15cm.

Solving for Wk in the proportion:

Wk / 5cm = 15cm / 8cm

Cross-multiplying and simplifying:

8Wk = 75cm

Wk = 75cm / 8

Wk ≈ 9.375cm

Now that we have the width of rectangle K, we can find the length using the same proportion:

Lk / 8cm = 15cm / 5cm

Cross-multiplying and simplifying:

5Lk = 8 * 15

Lk = 8 * 15 / 5

Lk = 24cm

Finally, we can calculate the area of rectangle K using the formula: Area = Length * Width.

Area of K = Lk * Wk

Area of K = 24cm * 9.375cm

Area of K ≈ 225 cm²

Therefore, the area of rectangle K is approximately 225 square centimeters.

For more questions on area

https://brainly.com/question/25292087

#SPJ8

The function h(t)=125+(440π)t gives the height of the tip of the blade as a function of time in minutes.

What is function?

In mathematics, a function is a mathematical relationship that assigns a unique output value to each input value.

To construct a function that describes the height of the tip of a blade on a turbine with 95-foot blades, we consider the vertical motion of the blade as it rotates. Assuming the turbine is initially positioned with one blade pointing straight up and measuring time in minutes:

Determine the distance covered in one revolution:

The circumference of the circle described by the tip of the blade is equal to the length of the blade, which is 95 feet. The distance covered in one revolution is calculated as the circumference of the circle, which is

2π times the radius. The radius is the sum of the height of the turbine's center and the length of the blade.

Radius = 125 + 95 = 220 feet

Distance covered in one revolution =  2π⋅220=440π feet

Determine the height at a specific time:

Since the turbine rotates at a speed of 9 revolutions per minute, time in minutes is directly related to the number of revolutions. For each revolution, the height increases by the distance covered in one revolution.

Let t represent time in minutes, and h(t) represent the height of the tip of the blade at time t. We can define

h(t) as: h(t)=125+(440π)t

Therefore, the function h(t)=125+(440π)t gives the height of the tip of the blade as a function of time in minutes.

To learn more about function visit:

https://brainly.com/question/11624077

#SPJ4

a) This is the power series representation of ln(x).

b) the interval of convergence is (-∞, ∞), and the power series converges for all real values of x.

What is Convergence?

onvergence is the coming together of two different entities, and in the contexts of computing and technology, is the integration of two or more different technologies

(a) To find the power series representation of the function f(x) = ln(x), we can use the Taylor series expansion for ln(1 + x), which is a commonly known series. We will start by substituting x with (x - 1) in order to have a series centered at 0.

ln(1 + x) = x - x^2/2 + x^3/3 - x^4/4 + x^5/5 - ...

To get the power series representation of ln(x), we substitute x with (x - 1) in the above series:

ln(x) = (x - 1) - (x - 1)^2/2 + (x - 1)^3/3 - (x - 1)^4/4 + (x - 1)^5/5 - ...

This is the power series representation of ln(x).

(b) To find the center, radius, and interval of convergence of the power series, we can use the ratio test.

The ratio test states that for a power series ∑(n=0 to ∞) c_n(x - a)^n, the series converges if the limit of |c_(n+1)/(c_n)| as n approaches infinity is less than 1.

In this case, our power series is:

∑(n=0 to ∞) ((-1)^n / (n+1))(x - 1)^n

Applying the ratio test:

|((-1)^(n+1) / (n+2))(x - 1)^(n+1) / ((-1)^n / (n+1))(x - 1)^n)|

= |((-1)^(n+1) / (n+2))(x - 1) / ((-1)^n / (n+1))|

= |(-1)^(n+1)(x - 1) / (n+2)|

As n approaches infinity, the absolute value of this expression becomes:

lim (n→∞) |(-1)^(n+1)(x - 1) / (n+2)|

= |(x - 1)| lim (n→∞) (1 / (n+2))

Since the limit of (1 / (n+2)) as n approaches infinity is 0, the series converges for all values of x - 1. Therefore, the center of convergence is a = 1 and the radius of convergence is infinite.

Hence, the interval of convergence is (-∞, ∞), and the power series converges for all real values of x.

To learn more about Convergence from the given link

https://brainly.com/question/14164120

#SPJ4

The probability of rolling a number less than 3 on a six-sided dice with sides labeled 1 through 6 is 2/6 or 1/3. This is because there are two numbers (1 and 2) that are less than 3,
When rolling a six-sided die with sides labeled 1 through 6, each number is equally likely to be rolled, meaning there is a 1 in 6 chance for each number. To determine the probability of rolling a number less than x (where x is a value between 1 and 7), you must count the number of outcomes meeting the condition and divide that by the total possible outcomes. For example, if x = 4, there are 3 outcomes (1, 2, and 3) that are less than 4, making the probability of rolling a number less than 4 equal to 3/6 or 1/2. Thus there are a total of six possible outcomes, each of which is equally likely to occur. So, the probability of rolling a number less than 3 is the number of favorable outcomes (2) divided by the total number of possible outcomes (6), which simplifies to 1/3. Therefore, there is a one in three chance of rolling a number less than 3 on a six-sided die.

To learn more about probability, visit:

https://brainly.com/question/14950837

#SPJ11

Answer:  The sum of the series (-1)^(n-1) / 5^n is 1/6.

Step-by-step explanation: To determine the sum of the series (-1)^(n-1) / 5^n, we can use the formula for the sum of an infinite geometric series. The formula is given by:

S = a / (1 - r),

where S is the sum of the series, a is the first term, and r is the common ratio.

In this case, the first term a = (-1)^0 / 5^1 = 1/5, and the common ratio r = (-1) / 5 = -1/5.

Substituting the values into the formula:

S = (1/5) / (1 - (-1/5))

S = (1/5) / (1 + 1/5)

S = (1/5) / (6/5)

S = 1/6.

Therefore, the sum of the series (-1)^(n-1) / 5^n is 1/6.

Learn more about ratio:https://brainly.com/question/12024093

#SPJ11

To find dw/ds and dw/dt using the Chain Rule, we need to differentiate the function w with respect to s and t, respectively. Given the function w = y^3 - 10x^2y and the values s = -5 and t = 10, we can proceed as follows:

(a) Finding dw/ds:

Using the Chain Rule, we have dw/ds = (dw/dx) * (dx/ds) + (dw/dy) * (dy/ds).

Taking the partial derivatives, we have:

dw/dx = -20xy

dx/ds = e^s

dw/dy = 3y^2 - 10x^2

dy/ds = e^t

Substituting the values s = -5 and t = 10 into the derivatives, we can evaluate dw/ds.

(b) Finding dw/dt:

Using the Chain Rule, we have dw/dt = (dw/dx) * (dx/dt) + (dw/dy) * (dy/dt).

Taking the partial derivatives, we have:

dw/dx = -20xy

dx/dt = e^s

dw/dy = 3y^2 - 10x^2

dy/dt = e^t

Substituting the values s = -5 and t = 10 into the derivatives, we can evaluate dw/dt.

In summary, to find dw/ds and dw/dt using the Chain Rule, we differentiate the function w with respect to s and t, respectively, by applying the appropriate partial derivatives. By substituting the given values of s and t into the derivatives, we can evaluate dw/ds and dw/dt.

To learn more about Chain Rule : brainly.com/question/30764359

#SPJ11

The statement "if f and g are decreasing functions on an interval I and f ∘ g is defined on I, then f ∘ g is increasing on I" is false. The composition of two decreasing functions does not necessarily result in an increasing function.

The statement "if f and g are decreasing functions on an interval I and f ∘ g is defined on I, then f ∘ g is increasing on I" is not necessarily true. In fact, the statement is false.

To understand why, let's break down the components of the statement. Firstly, if f and g are decreasing functions on an interval I, it means that as the input values increase, the corresponding output values of both functions decrease. However, the composition f ∘ g involves applying the function g first and then applying the function f to the result.

Now, it is important to note that the composition of two decreasing functions does not necessarily result in an increasing function. The combined effect of applying a decreasing function (g) followed by another decreasing function (f) can still result in a decreasing overall behavior. In other words, the composition f ∘ g can still exhibit a decreasing trend even when f and g are individually decreasing.

Therefore, it cannot be concluded that f ∘ g is always increasing on the interval I based solely on the fact that f and g are decreasing functions. Counterexamples can be found where f ∘ g is decreasing or even non-monotonic on the given interval.

Learn more about interval here:

https://brainly.com/question/11051767

#SPJ11

The domain of the function f(x, y) = √y + 6x is the set of all possible values for x and y that satisfy a certain condition. To determine the domain, we need to consider the restrictions on the variables x and y in the given function.

In the given function, f(x, y) = √y + 6x, there are two variables: x and y. The domain of the function refers to the set of all valid values that x and y can take.

To determine the domain, we need to consider any restrictions or conditions stated in the function. In this case, the only restriction is in the square root term, where y must be non-negative (y ≥ 0) since taking the square root of a negative number is not defined in the real number system.

Therefore, the domain of the function f(x, y) = √y + 6x can be expressed as {(x, y) | y ≥ 0}, meaning that any values of x and y are valid as long as y is non-negative. This implies that x can take any real number and y must be greater than or equal to zero.

Learn more about function here:

https://brainly.com/question/31062578

#SPJ11

The complete question is:

Determine the domain of the function of two variables f(x,y) = √y + 6x. (...) The domain is {(x,y) |D. (Type an inequality. Use a comma to separate answers as needed. Use integers or fractions for any numbers in the inequality.)

Using Part I of the Fundamental Theorem of Calculus, we found that the derivative of f(x) = ∫[2 to x] t³ dt is f'(x) = t^3. Additionally, we evaluated f'(2) and obtained the value 8.

To find f'(x) using Part I of the Fundamental Theorem of Calculus, we need to evaluate the definite integral of the derivative of f(x). Given that f(x) = ∫[2 to x] t³ dt, we can find f'(x) by taking the derivative of the integral with respect to x.

Using the Fundamental Theorem of Calculus, we know that if F(x) is an antiderivative of f(x), then ∫[a to x] f(t) dt = F(x) - F(a). In this case, f(x) = t³, so we need to find an antiderivative of t³.

To find the antiderivative, we can use the power rule for integration. The power rule states that ∫t^n dt = (1/(n+1))t^(n+1) + C, where C is the constant of integration. Applying the power rule to t³, we have:

∫t³ dt = (1/(3+1))t^(3+1) + C

= (1/4)t^4 + C.

Now, we can evaluate f'(x) by taking the derivative of the antiderivative of t³:

f'(x) = d/dx [(1/4)t^4 + C]

= (1/4) * d/dx (t^4)

= (1/4) * 4t^3

= t^3.

Therefore, f'(x) = t^3.

To find f'(2), we substitute x = 2 into the derivative function:

f'(2) = (2)^3

= 8.

Hence, f'(x) = t^3 and f'(2) = 8.

Learn more about Fundamental Theorem of Calculus at: brainly.com/question/30761130

#SPJ11

The derivative of the given function f(x)= 3¹0g, (2x²+1) [4 In (sin ² x)] 1. log is 60x(2x² + 1)ln(sin²x) / (sin²x)(2x² + 1). We can use the product rule and the chain rule

Let's break down the function into its components and apply the rules step by step.

First, let's consider the function g(u) = 4ln(u). Applying the chain rule, the derivative of g with respect to u is g'(u) = 4/u.

Next, we have h(v) = sin²(v). The derivative of h with respect to v can be found using the chain rule: h'(v) = 2sin(v)cos(v).

Now, let's apply the product rule to the function f(x) = 3¹0g(2x² + 1)h(x). The product rule states that the derivative of a product of two functions is given by the first function times the derivative of the second function, plus the second function times the derivative of the first function.

Applying the product rule, the derivative of f(x) is:

f'(x) = 3¹0g'(2x² + 1)h(x) + 3¹0g(2x² + 1)h'(x)

Substituting the derivatives of g(u) and h(v) that we found earlier, we get:

f'(x) = 3¹0(4/(2x² + 1))h(x) + 3¹0g(2x² + 1)(2sin(x)cos(x))

Simplifying this expression, we have:

f'(x) = 12h(x)/(2x² + 1) + 6g(2x² + 1)sin(2x)

Finally, replacing h(x) and g(2x² + 1) with their original forms, we obtain:

f'(x) = 12sin²(x)/(2x² + 1) + 6ln(2x² + 1)sin(2x)

Hence, the derivative of f(x) is 60x(2x² + 1)ln(sin²x) / (sin²x)(2x² + 1).

Learn more about derivatives here:

https://brainly.com/question/25324584

#SPJ11

The bounded area between the curve y = x² + 10x and the line y = 2x + 9 is approximately 194.667 square units (rounded to 3 decimal places).

To find the area between the curve y = x² + 10x and the line y = 2x + 9, we need to set the two functions equal to each other and solve for x. This gives us the x-values where the functions intersect.

x² + 10x = 2x + 9

=> x² + 8x - 9 = 0

=> (x - 1)(x + 9) = 0

Setting each factor equal to zero gives the solutions x = 1 and x = -9.

A = ∫ from -9 to 1 [ (2x + 9) - (x² + 10x) ] dx

= ∫ from -9 to 1 [ -x² - 8x + 9 ] dx

= [ -1/3 x³ - 4x² + 9x ] from -9 to 1

= [ -1/3 (1)³ - 4(1)² + 9(1) ] - [ -1/3 (-9)³ - 4(-9)² + 9(-9) ]

= [ -1/3 - 4 + 9 ] - [ -243/3 - 324 - 81 ]

= 4.6667 + 190

= 194.6667 square units

Therefore, the bounded area between the curve y = x² + 10x and the line y = 2x + 9 is approximately 194.667 square units (rounded to 3 decimal places).

Read more on bounded area here https://brainly.com/question/20464528

#SPJ4

The values of c that satisfy the condition for the area of the region bounded by the parabolas y = [tex]16x^2 - c^2[/tex] and y = [tex]c^2 - 16x^2[/tex] to be 16/3 are c = 2 and c = -2.

To find the values of c, we need to calculate the area of the region bounded by the two parabolas and set it equal to 16/3. The area can be obtained by integrating the difference between the two curves over their common interval of intersection.

First, we find the points of intersection by setting the two equations equal to each other:

[tex]16x^2 - c^2 = c^2 - 16x^2[/tex]

Rearranging the equation, we have:

32x^2 = 2c^2

Dividing both sides by 2, we get:

[tex]16x^2 = c^2[/tex]

Taking the square root, we obtain:

4x = c

Solving for x, we find two values of x: x = c/4 and x = -c/4.

Next, we calculate the area by integrating the difference between the two curves over the interval [-c/4, c/4]:

A = ∫[-c/4, c/4] [[tex](16x^2 - c^2) - (c^2 - 16x^2)[/tex]] dx

Simplifying the expression, we have:

A = ∫[-c/4, c/4] ([tex]32x^2 - 2c^2[/tex]) dx

Integrating, we find:

A = [tex][32x^{3/3} - 2c^{2x}][/tex] evaluated from -c/4 to c/4

Evaluating the expression, we get:

A = [tex]16c^{3/3} - 2c^{3/4}[/tex]

Setting this equal to 16/3 and solving for c, we find the values c = 2 and c = -2. These are the values of c that satisfy the condition for the area of the region to be 16/3.

To learn more about parabolas, refer:-

https://brainly.com/question/29267743

#SPJ11

The critical values tα/2 for the given sample sizes and confidence levels are as follows:

for a sample size of 37 at a 90% confidence level, tα/2 = 1.691;

for a sample size of 29 at a 98% confidence level, tα/2 = 2.756;

for a sample size of 9 at an 80% confidence level, tα/2 = 1.860;

for a sample size of 70 at a 95% confidence level, tα/2 = 1.999.

To find the critical values tα/2 from the t-table, we need to determine the degrees of freedom (df) and the corresponding significance level α/2 for the given sample sizes and confidence levels.

For a sample size of 37 at a 90% confidence level, the degrees of freedom is n - 1 = 37 - 1 = 36. Looking up the value of α/2 = (1 - 0.90)/2 = 0.05 in the t-table with 36 degrees of freedom, we find tα/2 = 1.691.

For a sample size of 29 at a 98% confidence level, the degrees of freedom is n - 1 = 29 - 1 = 28. The significance level α/2 is (1 - 0.98)/2 = 0.01. Consulting the t-table with 28 degrees of freedom, we find tα/2 = 2.756.

For a sample size of 9 at an 80% confidence level, the degrees of freedom is n - 1 = 9 - 1 = 8. The significance level α/2 is (1 - 0.80)/2 = 0.10. Referring to the t-table with 8 degrees of freedom, we find tα/2 = 1.860.

For a sample size of 70 at a 95% confidence level, the degrees of freedom is n - 1 = 70 - 1 = 69. The significance level α/2 is (1 - 0.95)/2 = 0.025. Checking the t-table with 69 degrees of freedom, we find tα/2 = 1.999.

Hence, the critical values tα/2 for the given sample sizes and confidence levels are as mentioned above.

Learn more about critical values here:

https://brainly.com/question/32607910

#SPJ11

The vector a with the same direction as (-10, 3, 10) and a length of 5 is approximately (-7.65, 2.29, 7.65).

To find a vector with the same direction as (-10, 3, 10) but with a length of 5, we can scale the original vector by dividing each component by its magnitude and then multiplying it by the desired length.

The original vector (-10, 3, 10) has a magnitude of √((-10)^2 + 3^2 + 10^2) = √(100 + 9 + 100) = √209.

To obtain a vector with a length of 5, we divide each component of the original vector by its magnitude:

x-component: -10 / √209

y-component: 3 / √209

z-component: 10 / √209

Now, we need to scale these components to have a length of 5. We multiply each component by 5:

x-component: (-10 / √209) * 5

y-component: (3 / √209) * 5

z-component: (10 / √209) * 5

Evaluating these expressions gives us the vector a:

a ≈ (-7.65, 2.29, 7.65)

Learn more about finding the unit vector in the same direction:

https://brainly.com/question/29137188

#SPJ11

To determine the limit of the sequence an = 5n² as n approaches infinity, we can observe the behavior of the terms as n becomes larger and larger.

As n increases, the term 5n² also increases, and it grows without bound. There is no specific value that the terms approach or converge to as n goes to infinity. Therefore, we can say that the sequence diverges.

Symbolically, we can represent this as:

lim an = DNE (as n approaches infinity).

In other words, the limit of the sequence does not exist since the terms of the sequence do not approach a specific value as n becomes infinitely large.

Learn more about sequence here: brainly.com/question/32515455

#SPJ11

a. The cost of installing 40 ft² of countertop is $800.

b. The cost of installing an extra 12 ft² after 40 ft² has already been installed is $552.

a) To find the cost of installing 40 ft² of countertop, we can evaluate the integral of C'(x) over the interval [0, 40]:

C(40) = ∫[0, 40] C'(x) dx

Since C'(x) = x, we can substitute this into the integral:

C(40) = ∫[0, 40] x dx

Evaluating the integral, we get:

C(40) = [x²/2] evaluated from 0 to 40

= (40²/2) - (0²/2)

= 800 - 0

= 800 dollars

Therefore, the cost of installing 40 ft² of countertop is $800.

b) To find the cost of installing an extra 12 ft² after 40 ft² has already been installed, we can subtract the cost of installing 40 ft² from the cost of installing 52 ft²:

C(40 + 12) - C(40) = ∫[40, 52] C'(x) dx

Since C'(x) = x, we can substitute this into the integral:

C(40 + 12) - C(40) = ∫[40, 52] x dx

Evaluating the integral, we get:

C(40 + 12) - C(40) = [x²/2] evaluated from 40 to 52

= (52²/2) - (40²/2)

= 1352 - 800

= 552 dollars

Therefore, the cost of installing an extra 12 ft² after 40 ft² has already been installed is $552.

To know more about integrate check the below link:

brainly.com/question/27419605

#SPJ11

The two positive numbers satisfying the given requirements are:

x = 48

y = 16

What is the linear equation?

A linear equation is one in which the variable's maximum power is always 1. A one-degree equation is another name for it.

Here, we have

Given: The product is 768 and the sum of the first plus three times the second is a minimum.

Our two equations are:

xy=768

x+3y=S (for sum)

Since we are trying to minimize the sum, we need to take the derivative of it.

Let's solve for y.

xy = 768

y = 768/x

Now we can plug this in for y in our other problem.

S = x+3(768/x)

S = x+(2304/x)

Take the derivative.

S' = 1-(2304/x²)

We need to find the minimum and to do so we solve for x.

1-(2304/x²)=0

-2304/x² = -1

Cross multiply.

-x² = -2304

x² = 2304

√(x²) =√(2304)

x =48, x = -48

Also, x = 0 because if you plug it into the derivative it is undefined.

So, draw a number line with all of your x values. Pick numbers less than and greater than each.

For less than -48, use 50

Between -48 and 0, use -1

Between 0 and 48, use 1

For greater than 48, use 50.

Now plug all of these into your derivative and mark whether the outcome is positive or negative. We'll find that x=48 is your only minimum because x goes from negative to positive.

So your x value for x+3y = S is 48. To find y, plug x into y = 768/x. y = 16.

Hence, the two positive numbers satisfying the given requirements are:

x = 48

y = 16

To learn more about the linear equation from the given link

https://brainly.com/question/28732353

#SPJ4

Since  [tex]\rm E(26) < 1$[/tex], Demand is Inelastic. Company should raise prices to increase Revenue.

Demand is the quantity οf cοnsumers whο are willing and able tο buy prοducts at variοus prices during a given periοd οf time. Demand fοr any cοmmοdity implies the cοnsumers' desire tο acquire the gοοd, the willingness and ability tο pay fοr it.

The demand fοr a gοοd that the cοnsumer chοοses, depends οn the price οf it, the prices οf οther gοοds, the cοnsumer’s incοme and her tastes and preferences

Demand, [tex]$ \rm D(p)=110-60 p+p^2-0.04 p^3$$$[/tex]

[tex]\rm D^{\prime}(p)=-60+2 p-0.12 p^2[/tex]

Now At [tex]\rm p=26$[/tex]

[tex]\begin{aligned}\rm D(26) & =110-60(26)+26^2-0.04(26)^3 \\& =-1477.04 \\\rm D^{\prime}(26) & =-89.12\end{aligned}[/tex]

[tex]$$Elasticity,$$[/tex]

[tex]\rm E(p)=\dfrac{-p D^{\prime}(p)}{D(p)}[/tex]

[tex]$$At p = 26$$[/tex]

[tex]$ \rm E(26)=\frac{-26 \times(-89.12)}{-1477.04}=-1.56876[/tex]

Since  [tex]\rm E(26) < 1$[/tex], Demand is Inelastic.

Company should raise prices to increase Revenue.

Learn more about Demand

https://brainly.com/question/30402955

#SPJ4

Complete question:

The linear approximation near x=0 for the function f(x) = 34 - 3x^2 is given by y = 34.

To find the linear approximation, we need to evaluate the function at x=0 and find the slope of the tangent line at that point.

At x=0, the function f(x) becomes f(0) = 34 - 3(0)^2 = 34.

The slope of the tangent line at x=0 can be found by taking the derivative of the function with respect to x. The derivative of f(x) = 34 - 3x^2 is f'(x) = -6x.

Evaluating the derivative at x=0, we get f'(0) = -6(0) = 0.

Since the slope of the tangent line at x=0 is 0, the equation of the tangent line is y = 34, which is the linear approximation near x=0 for the function f(x) = 34 - 3x^2.

Therefore, the linear approximation near x=0 for the function f(x) = 34 - 3x^2 is y = 34.

Learn more about derivative here:

https://brainly.com/question/29020856

#SPJ11

The equation to be solved algebraically is 4sin(x) - sin(x). We will find all solutions of the equation on the interval (0, 21), providing exact answers when possible and rounding approximate answers to the nearest hundredth.

To solve the equation 4sin(x) - sin(x) = 0 algebraically on the interval (0, 21), we can factor out sin(x) from both terms. This gives us sin(x)(4 - 1) = 0, simplifying to 3sin(x) = 0. Since sin(x) = 0 when x is a multiple of π (pi), we need to find the values of x that satisfy the equation on the given interval.

Within the interval (0, 21), the solutions for sin(x) = 0 occur when x is a multiple of π. The first positive solution is x = π, and the other solutions are x = 2π, x = 3π, and so on. However, we need to consider the interval (0, 21), so we must find the values of x that lie within this range.

From π to 2π, the value of x is approximately 3.14 to 6.28. From 2π to 3π, x is approximately 6.28 to 9.42. Continuing this pattern, we find that the solutions within the interval (0, 21) are x = 3.14, 6.28, 9.42, 12.56, 15.70, and 18.84. These values are rounded to the nearest hundredth, as requested.

Learn more about interval here:

https://brainly.com/question/11051767

#SPJ11

Given r = 1-3 sin 0, find the following. The area of the inner loop of the given polar curve, rounded to four decimal places, is approximately -5.4978.

To find the area of the inner loop of the polar curve r = 1 - 3sin(θ), we need to determine the limits of integration for θ that correspond to the inner loop

First, let's plot the curve to visualize its shape. The equation r = 1 - 3sin(θ) represents a cardioid, a heart-shaped curve.

The cardioid has an inner loop when the value of sin(θ) is negative. In the given equation, sin(θ) is negative when θ is in the range (π, 2π).

To find the area of the inner loop, we integrate the area element dA = (1/2)r² dθ over the range (π, 2π):

A = ∫[π, 2π] (1/2)(1 - 3sin(θ))² dθ.

Expanding and simplifying the expression inside the integral:

A = ∫[π, 2π] (1/2)(1 - 6sin(θ) + 9sin²(θ)) dθ

 = (1/2) ∫[π, 2π] (1 - 6sin(θ) + 9sin²(θ)) dθ.

To solve this integral, we can expand and evaluate each term separately:

A = (1/2) (∫[π, 2π] dθ - 6∫[π, 2π] sin(θ) dθ + 9∫[π, 2π] sin²(θ) dθ).

The first integral ∫[π, 2π] dθ represents the difference in the angle values, which is 2π - π = π.

The second integral ∫[π, 2π] sin(θ) dθ evaluates to zero since sin(θ) is an odd function over the interval [π, 2π].

For the third integral ∫[π, 2π] sin²(θ) dθ, we can use the trigonometric identity sin²(θ) = (1 - cos(2θ))/2:

A = (1/2)(π - 9/2 ∫[π, 2π] (1 - cos(2θ)) dθ)

 = (1/2)(π - 9/2 (∫[π, 2π] dθ - ∫[π, 2π] cos(2θ) dθ)).

Again, the first integral ∫[π, 2π] dθ evaluates to π.

For the second integral ∫[π, 2π] cos(2θ) dθ, we use the property of cosine function over the interval [π, 2π]:

A = (1/2)(π - 9/2 (π - 0))

 = (1/2)(π - 9π/2)

 = (1/2)(-7π/2)

 = -7π/4.

The area of the inner loop of the given polar curve, rounded to four decimal places, is approximately -5.4978.bIt's important to note that the negative sign arises because the area is bounded below the x-axis, and we take the absolute value to obtain the magnitude of the area.

Learn more about limits of integration here:

https://brainly.com/question/31994684

#SPJ11

The indefinite integral of ∫1200 dx is equal to 1200x + K, where K represents the integration constant.

To compute the indefinite integral of ∫1200 dx, we can apply the power rule of integration. According to the power rule, the integral of x^n dx, where n is a constant, is equal to (x^(n+1))/(n+1) + C, where C is the integration constant. In this case, the integrand is a constant function, 1200, which can be written as 1200x^0. Applying the power rule, we have (1200x^(0+1))/(0+1) + C = 1200x + C, where C represents the integration constant. Therefore, the indefinite integral of ∫1200 dx is equal to 1200x + K, where K represents the integration constant.

Learn more about indefinite integral here:

https://brainly.com/question/31549819

#SPJ11

(a) The solution to the differential equation [tex]v' = 11/27x^(^1^/^2^)[/tex] is [tex]v = (22/81)x^(^3^/^2^) + C[/tex], where C is an arbitrary constant.

(b) The solution to the differential equation (1 + 1/x)y - xy' = 0 with the initial condition v(0) = -1 is [tex]y = x - 1/2ln(x^2 + 1).[/tex]

(c) The solution to the differential equation 7y' + 7y + 1 = [tex]e^x[/tex], with the initial condition y(0) = 2, is y = [tex](e^x - 1)/7[/tex].

(d) The solution to the differential equation ty' + y = 1 is y = (1 + C/t) / t, where C is an arbitrary constant.

To solve the differential equation [tex]v' = 11/27x^(^1^/^2^)[/tex], we can integrate both sides with respect to x to obtain the solution [tex]v = (22/81)x^(^3^/^2^) + C[/tex], where C is the constant of integration.

For the differential equation (1 + 1/x)y - xy' = 0, we can rearrange the equation and solve it using separation of variables. By integrating and applying the initial condition v(0) = -1, we find the solution [tex]y = x - 1/2ln(x^2 + 1).[/tex]

The differential equation 7y' + 7y + 1 = [tex]e^x[/tex] can be solved using an integrating factor method. After finding the integrating factor, we integrate both sides of the equation and use the initial condition y(0) = 2 to determine the solution [tex]y = (e^x - 1)/7.[/tex]

To solve the differential equation ty' + y = 1, we can use an integrating factor method. By finding the integrating factor and integrating both sides, we obtain the solution y = (1 + C/t) / t, where C is the constant of integration.

Learn more about Differential equations

brainly.com/question/2273154

#SPJ11

Given that the limit of f(x) as x approaches a certain value is 81, we need to find the limit of v * f(x) as x approaches the same value. The options provided are 3, 8, 81, and 9.

To find the limit of v * f(x), where v is a constant, we can use a property of limits that states that the limit of a constant times a function is equal to the constant multiplied by the limit of the function. In this case, since v is a constant, we can write:

lim (v * f(x)) = v * lim f(x)

Given that the limit of f(x) is 81, we can substitute this value into the equation:

lim (v * f(x)) = v * 81

Therefore, the limit of v * f(x) is equal to v times 81.

Now, looking at the provided options, we can see that the correct answer is (c) 81, as multiplying any constant by 81 will result in 81.

Learn more about equation here: https://brainly.com/question/12971243

#SPJ11

To find the curvature of a

vector function

F(t) at a specific value of t, we need to compute the curvature formula: K = |dT/ds| / |ds/dt|. In this case, we are given F(t) = (1, 740t^2), and we need to find the curvature at t = v^2.

To find the curvature, we first need to calculate the unit

tangent vector

T. The unit tangent vector T is given by T = dF/ds, where dF/ds is the derivative of the vector function F(t) with respect to the arc length parameter s. Since we are not given the

arc length

parameter, we need to find it first.

To find the arc length parameter s, we

integrate

the magnitude of the derivative of F(t) with respect to t. In this case, F(t) = (1, 740t^2), so dF/dt = (0, 1480t), and the

magnitude

of dF/dt is |dF/dt| = 1480t. Therefore, the arc length parameter is s = ∫|dF/dt| dt = ∫1480t dt = 740t^2.

Now that we have the arc length

parameter

s, we can find the unit tangent vector T = dF/ds. Since dF/ds = dF/dt = (0, 1480t) / 740t^2 = (0, 2/t), the unit tangent vector T is (0, 2/t).

Next, we need to find ds/dt. Since s = 740t^2, ds/dt = d(740t^2)/dt = 1480t.

Finally, we can calculate the

curvature

K using the formula K = |dT/ds| / |ds/dt|. In this case, dT/ds = 0 and |ds/dt| = 1480t. Therefore, the curvature at t = v^2 is K = |dT/ds| / |ds/dt| = 0 / 1480t = 0.

Hence, the curvature of the vector function F(t) at t = v^2 is 0.

To learn more about

curvature

click here :

brainly.com/question/32215102

#SPJ11

The first series is Σ(-(x+6))^n, and we need to find its radius of convergence and interval of convergence.

To determine the radius of convergence, we can use the ratio test. Applying the ratio test, we have:

lim (|(x+6)|^(n+1)/|(-(x+6))^n|) = |x+6|

The series converges if |x + 6| < 1, which means -7 < x < -5. Therefore, the interval of convergence is (-7, -5) and the radius of convergence is R = 1.

The second series is Σ(n!/n^x), and we want to find its radius of convergence and interval of convergence.

Using the ratio test, we have:

lim (|(n+1)!/(n+1)^x| / |(n!/n^x)|) = lim ((n+1)/(n+1)^x) = 1

Since the limit is 1, the ratio test is inconclusive. However, we know that the series converges for x > 1 by the comparison test with the harmonic series. Therefore, the interval of convergence is (1, ∞) and the radius of convergence is ∞.

To learn more about harmonic series : brainly.com/question/32338941

#SPJ11

The surface area of the part of the sphere above the cone is approximately 40.78 square units.

To find the surface area, we first determine the intersection curve between the sphere and the cone. By substituting z = 22 + y^2 into the equation of the sphere, we get a quadratic equation in terms of y. Solving it yields two y-values. We then integrate the square root of the sum of the squares of the partial derivatives of x and y with respect to y over the interval of the intersection curve. This integration gives us the surface area.

Learn more about square here:

https://brainly.com/question/14198272

#SPJ11