The normal force exerted by the horizontal floor on the ladder is equal to the weight of the ladder, which is 147 N. The frictional force exerted by the horizontal floor on the ladder depends on the coefficient of friction.
The normal force, denoted as N, is the perpendicular force exerted by a surface to support the weight of an object. In this case, the normal force exerted by the horizontal floor on the ladder will be equal to the weight of the ladder.
The weight of the ladder can be calculated using the formula: weight = mass × acceleration due to gravity. Given that the mass of the ladder is 15 kg and the acceleration due to gravity is approximately 9.8 m/s², we can calculate the weight as follows:
Weight of ladder = 15 kg × 9.8 m/s² = 147 N
Therefore, the normal force exerted by the horizontal floor on the ladder is 147 N.
Now let's consider the frictional force exerted by the horizontal floor on the ladder. The frictional force, denoted as f, depends on the coefficient of friction between the surfaces in contact. Since the ladder rests on a rough horizontal floor.
The frictional force can be calculated using the formula: frictional force = coefficient of friction × normal force.
To learn more about ladder -
brainly.com/question/33192846
#SPJ11
QUESTION 5 Which of the following is NOT true? The sum of two vectors of the same magnitude cannot be zero The location of a vector on a grid has no impact on its meaning The magnitude of a vector quantity is considered a scalar quantity Any vector can be expressed as the sum of two or more vectors QUESTION 6 What would be the distance from your starting position if you were to follow the directions: "Go North 10 miles, then East 4 miles and then South 7 miles" 7 miles 5 miles 21 miles 14 miles
QUESTION 5 is: The magnitude of a vector quantity is considered a scalar quantity. This statement is NOT true.
QUESTION 6 is: 7 miles.
The answer to QUESTION 5 is: The magnitude of a vector quantity is considered a scalar quantity. This statement is NOT true. The magnitude of a vector represents its size or length and is always considered a scalar quantity.
The answer to QUESTION 6 is: 7 miles.
If you start at a certain position and go North 10 miles, you would move 10 miles in the North direction. Then, if you go East 4 miles, you would move 4 miles in the East direction. Finally, if you go South 7 miles, you would move 7 miles in the South direction.
Since the 7-mile Southward movement cancels out the initial 7-mile Northward movement, the net displacement in the North-South direction is zero. The remaining 4-mile Eastward movement determines the final distance from the starting position, which is 4 miles.
To know more about vector quantity here
https://brainly.com/question/13930100
#SPJ4
QUESTION 5. The statement "The sum of two vectors of the same magnitude cannot be zero" is NOT true.
QUESTION 6. The distance from the starting position after following the directions "Go North 10 miles, then East 4 miles, and then South 7 miles" would be 7 miles.
QUESTION 5
The statement "The sum of two vectors of the same magnitude cannot be zero" is incorrect. In fact, the sum of two vectors of the same magnitude can be zero. This occurs when the two vectors have equal magnitudes but are in opposite directions. In such cases, their combined effect cancels out, resulting in a net sum of zero.
QUESTION 6
To calculate the distance from the starting position after following the directions "Go North 10 miles, then East 4 miles, and then South 7 miles," we need to determine the net displacement. Starting from the initial point and moving North by 10 miles, we establish a displacement of 10 miles in the North direction. Then, moving East by 4 miles adds a displacement of 4 miles in the East direction. However, when we move South by 7 miles, we have a displacement in the opposite direction of the initial North direction.
Taking these displacements into account, we find that the net displacement is given by 10 miles (North) + 4 miles (East) - 7 miles (South). Simplifying this expression, we get a net displacement of 7 miles.
Therefore, the correct option for the distance from the starting position is 7 miles.
Learn more about vectors:
https://brainly.com/question/24256726
#SPJ11
Given the two vectors ₁ c₁ (a, b, 0) and ₂ = c₂(-b, a, 0), where a² + b = 1, calculate the vector dot product ₁₂, and the vector magnitudes ₁ + ₂ and 1-₂. Simplify your results to eliminate both a and b. Comment on what you observe, specifically noting the geometry and the angle between the vectors. Enter responses using 1 for c₁, and 2 for ₂. Enter vectors in the format [p, q, r). V₁ V₂ = (v1+v2) =
(V1-V2)=
the results are:1. 1.2 = 0.2. |1 + 2| = √2.3. |1 - 2| = √2.
Given vectors are 1 = c1 (a, b, 0) and 2 = c2 (-b, a, 0).
The formula for the dot product is; 1 .
2 = |1| × |2| × cosθ ... (1)
Here, |1| is the magnitude of vector 1, |2| is the magnitude of vector 2 and θ is the angle between them.
The magnitude of the vector 1 + 2 is; |1 + 2| = √[(a - b)² + (a + b)²] = √[2(a² + b²)] ... (2)
The magnitude of the vector 1 - 2 is; |1 - 2| = √[(a + b)² + (a - b)²] = √[2(a² + b²)] ... (3)
The dot product of the vectors 1 and 2 are:1.2 = c1c2 (a, b, 0) . (-b, a, 0)
= -c1c2 ab + c1c2 ba
= 0... (4)
Comparing equations (2) and (3), we observe that |1 + 2| = |1 - 2|.
Therefore, the two vectors 1 and 2 have equal magnitudes.
A vector has zero magnitude if and only if it is a zero vector, so vectors 1 and 2 are not zero vectors. Therefore, they are not perpendicular to each other. The dot product of two non-zero vectors is zero if and only if the two vectors are perpendicular to each other.
Thus, we can observe that the two vectors 1 and 2 are not perpendicular to each other, which implies that the angle between them is non-zero and the cosine of the angle is zero. In other words, the two vectors 1 and 2 are orthogonal to each other.
The vector 1 + 2 can be written as (a - b, a + b, 0), and the vector 1 - 2 can be written as (a + b, a - b, 0).
Therefore, the results are:1. 1.2 = 0.2. |1 + 2| = √2.3. |1 - 2| = √2.
learn more about vectors here
https://brainly.com/question/28028700
#SPJ11
Consider a small object at the center of a glass ball of diameter 28.0cm. Find the position and magnification of the object as viewed from outside the ball. The index of refraction for glass is 1.60. Find the focal point. Is it inside or outside of the ball?Object 28.0 cm
Therefore, the position of the object as viewed from outside the glass ball is approximately 21 cm away from the surface of the ball, and the magnification is approximately -1.5.
To find the position and magnification of the object as viewed from outside the glass ball, we can use the lens equation and the magnification equation.
Diameter of the glass ball (d) = 28.0 cm
Index of refraction of glass (n) = 1.60
First, let's find the focal point of the glass ball. Since the object is at the center of the ball, the focal point will also be at the center.
The focal length of a lens is given by the formula:
f = (n - 1) * R
where f is the focal length and R is the radius of curvature of the lens.
Since the glass ball is a sphere, the radius of curvature is half the diameter:
R = d/2 = 28.0 cm / 2 = 14.0 cm
Substituting the values into the formula, we can find the focal length:
f = (1.60 - 1) * 14.0 cm = 0.60 * 14.0 cm = 8.4 cm
The focal point is located at a distance of 8.4 cm from the center of the glass ball. Since the object is at the center of the ball, the focal point is inside the ball.
Now let's find the position and magnification of the object as viewed from outside the ball.
The lens equation relates the object distance (do), image distance (di), and focal length (f):
1/do + 1/di = 1/f
Since the object is at the center of the ball, the object distance is equal to the radius of the ball:
do = d/2 = 28.0 cm / 2 = 14.0 cm
Substituting the values into the lens equation:
1/14.0 cm + 1/di = 1/8.4 cm
Solving for the image distance (di):
1/di = 1/8.4 cm - 1/14.0 cm
1/di = (14.0 cm - 8.4 cm) / (8.4 cm * 14.0 cm)
1/di = 5.6 cm / (8.4 cm * 14.0 cm)
1/di = 5.6 cm / 117.6 cm^2
di = 117.6 cm^2 / 5.6 cm
di ≈ 21 cm
The image distance (di) is approximately 21 cm.
To find the magnification (m), we can use the formula:
m = -di/do
Substituting the values:
m = -21 cm / 14.0 cm
m ≈ -1.5
The magnification (m) is approximately -1.5, indicating that the image is inverted.
Therefore, the position of the object as viewed from outside the glass ball is approximately 21 cm away from the surface of the ball, and the magnification is approximately -1.5.
Learn more about magnification https://brainly.com/question/131206
#SPJ11
Marxism and Environmentalism have some serious philosophical challenges to Liberalism. Two areas of challenge from Marxism are private property and class. Two areas from Environmentalism are private property and conservation. Very briefly explain how or why these four areas are serious challenges to Liberalism
Marxism and Environmentalism pose serious philosophical challenges to Liberalism. Private property and class are two of the major areas that Marxism poses a challenge to Liberalism, while private property and conservation are two of the major areas that Environmentalism poses a challenge to Liberalism.
Marxism poses a challenge to Liberalism on private property and class grounds. According to Marxism, private ownership of property should be abolished. All resources, including land, should be owned and managed by the state for the benefit of all. Marxism believes that class struggle and inequality are both inherent features of capitalism and that a socialist society can only be achieved by eliminating private property and class differences. Marxism believes that individuals should be classified and treated according to their skills, and that the government should be responsible for managing the economy and allocating resources based on need. Environmentalism challenges Liberalism in terms of private property and conservation. As a result, environmentalists argue that conservation and preservation should be given priority over economic development.
To know more about eliminating visit:
https://brainly.com/question/29807794
#SPJ11
State the boundary conditions governing the propagation of an electromagnetic wave across the interface between two isotropic dielectrics with refractive indices n, and nz.
When electromagnetic waves are transmitted across the interface of two isotropic dielectrics with refractive indices, the following are the boundary conditions governing the propagation of an electromagnetic wave:
Boundary conditions governing the propagation of an electromagnetic wave across the interface between two isotropic dielectrics with refractive indices n and nz are:
1. The tangential components of the electric field E are continuous across the interface.
2. The tangential components of the magnetic field H are continuous across the interface.
3. The normal components of the displacement D are continuous across the interface.
4. The normal components of the magnetic field B are continuous across the interface.
5. The tangential component of the electric field E at the interface is proportional to the tangential component of the magnetic field H at the interface, with a proportionality constant equal to the characteristic impedance Z of the medium containing the electric and magnetic fields.
Characteristic impedance Z of a medium containing electric and magnetic fields is given as Z = (u/ε)1/2, where ε is the permittivity and u is the permeability of the medium.
The values of permittivity and permeability may differ for different materials and media.
Learn more about "Boundary conditions governing the propagation of electromagnetic waves " refer to the link : https://brainly.com/question/29854618
#SPJ11
A beam of laser light with a wavelength of X = 355.00 nm passes through a circular aperture of diameter a = 0.197 mm. What is the angular width of the central diffraction maximum formed on a screen? 0.397
The angular width of the central diffraction maximum formed on a screen is 2.20 × 10⁻³ radians.
The formula that relates the angular width of the central diffraction maximum formed on a screen to the wavelength of the laser and the diameter of the circular aperture is given by:
$$\theta = 1.22 \frac{\lambda}{a}$$
Where:
θ = angular width of the central diffraction maximum
λ = wavelength of the laser used
a = diameter of the circular aperture
Substituting the given values in the above formula:
$$\theta = 1.22 \frac{355.00 \times 10^{-9}\ m}{0.197 \times 10^{-3}\ m}$$$$\theta
= 2.20 \times 10^{-3}$$.
To know more about central diffraction visit:-
https://brainly.com/question/32076803
#SPJ11
a girl at a state fair swings a ball in vertical circle at the end of a string. the force of the bottom of the string is?
When a ball is swung on a string in a vertical circle, the tension is greatest at the bottom of the circular path. This is where the rope is most likely to break. It should make sense that the tension at the bottom is the greatest.
Two firecrackers explode at the same place in a rest frame with a time separation of 11 s in that frame. Find the time between explosions according to classical physics, as measured in a frame moving with a speed 0.8 c with respect to the rest frame. Answer in units of s.
According to classical physics, the time between explosions measured in the frame moving with a speed of 0.8c is approximately 18.33 seconds.
To find the time between explosions according to classical physics, we can use the concept of time dilation. In special relativity, time dilation occurs when an observer measures a different time interval between two events due to relative motion.
The time dilation formula is given by:
Δt' = Δt / √[tex](1 - (v^2 / c^2))[/tex]
Where
Δt' is the time interval measured in the moving frame,
Δt is the time interval measured in the rest frame,
v is the relative velocity between the frames, and
c is the speed of light.
In this case, the time interval measured in the rest frame is 11 seconds (Δt = 11 s), and the relative velocity between the frames is 0.8c (v = 0.8c).
Plugging these values into the time dilation formula, we have:
Δt' = 11 / √[tex](1 - (0.8c)^2 / c^2)[/tex]
Δt' = 11 / √(1 - 0.64)
Δt' = 11 / √(0.36)
Δt' = 11 / 0.6
Δt' = 18.33 s
Therefore, according to classical physics, the time between explosions measured in the frame moving with a speed of 0.8c is approximately 18.33 seconds.
To know more about time here
https://brainly.com/question/30413417
#SPJ4
A proton moving at 4.10 x 10^5 m/s through a magnetic field of magnitude 1.74 T experiences a magnetic force of magnitude 7.20 x 10^-13 N. What is the angle between the proton's velocity and the field?
The angle between the proton's velocity and the magnetic field is 0.0642 radians.
The magnetic force on a charged particle:
F = q × v × B × sin(Θ)
Given:
F = 7.20 x 10⁻¹³ N
v = 4.10 x 10⁵ m/s
B = 1.74 T
sin(Θ) = F / q × v × B
sin(Θ) = (7.20 x 10⁻¹³ ) / [(1.60 x 10⁻¹⁹) × (4.10 x 10⁵) × (1.74 )]
sin(Θ) = 0.001118
Θ = sin⁻¹(0.001118)
Θ = 0.0642 radians
The angle between the proton's velocity and the magnetic field is 0.0642 radians.
To know more about the magnetic field:
https://brainly.com/question/30331791
#SPJ4
The angle between the proton's velocity and the field is 3.76 × 10⁻¹° or 0.376 µ°
When a charged particle moves through a magnetic field, it experiences a magnetic force.
The magnetic force (F) on a particle of charge (q) moving with velocity (v) through a magnetic field (B) is given by
F = qvBsinθ Where
qv is the magnetic force component perpendicular to the direction of motion, and
θ is the angle between the particle's velocity and the direction of the magnetic field.
Given data:
Magnitude of velocity of proton, v = 4.10 x 105 m/s
Magnitude of magnetic field, B = 1.74 T
Magnitude of magnetic force, F = 7.20 x 10-13 N
We need to find the angle between the proton's velocity and the field, θ.
So,
F = qvBsinθ7.20 × 10⁻¹³
= 1.6 × 10⁻¹⁹ × 4.1 × 10⁵ × 1.74 × sin θ∴
sin θ = (7.20 × 10⁻¹³) / (1.6 × 10⁻¹⁹ × 4.1 × 10⁵ × 1.74)∴
sin θ = 6.55 × 10⁻¹²∴
θ = sin⁻¹ (6.55 × 10⁻¹²)
θ = 3.76 × 10⁻¹° or 0.376 µ°.
Learn more about proton from the given link
https://brainly.com/question/1481324
#SPJ11
An 93kg diver inhales to have a body density of 948 kg/m3, then swims to the bottom of a shallow sea (sea water density = 1024 kg/m") and begins to float to the surface. What is his acceleration? (g=9.8 m/s2)
The diver's acceleration is approximately 1.01 m/s^2.
To calculate the diver's acceleration, we need to consider the forces acting on the diver.
1. Weight force: The weight force acts downward and is given by the formula:
Weight = mass × gravity
= 93 kg × 9.8 m/s^2
= 911.4 N
2. Buoyant force: When the diver inhales to have a body density less than the surrounding water, there will be an upward buoyant force acting on the diver. The buoyant force is given by:
Buoyant force = fluid density × volume submerged × gravity
The volume submerged is equal to the volume of the diver. Since the diver's body density is 948 kg/m^3, we can calculate the volume submerged as:
Volume submerged = mass / body density
= 93 kg / 948 kg/m^3
= 0.0979 m^3
Now we can calculate the buoyant force:
Buoyant force = 1024 kg/m^3 × 0.0979 m^3 × 9.8 m/s^2
= 1005.5 N
Now, let's calculate the net force acting on the diver:
Net force = Buoyant force - Weight
= 1005.5 N - 911.4 N
= 94.1 N
Since the diver is floating to the surface, the net force is directed upward. We can use Newton's second law to calculate the acceleration:
Net force = mass × acceleration
Rearranging the formula, we find:
Acceleration = Net force / mass
= 94.1 N / 93 kg
≈ 1.01 m/s^2
Therefore, the diver's acceleration is approximately 1.01 m/s^2.
Learn more about acceleration https://brainly.com/question/460763
#SPJ11
The same train ordinarily decelerates at a rate of 1.95 m/s2. how long (in s) does it take to come to a stop from its top speed?
(a) It takes approximately 43.70 seconds for the light-rail commuter train to reach its top speed of 80.0 km/h, starting from rest.
(b) It takes approximately 48.48 seconds for the same train to come to a stop from its top speed.
(c) The emergency deceleration of the train is approximately 9.64 m/s².
(a) To find the time it takes for the train to reach its top speed, we can use the equation of motion:
v = u + at
where:
v is the final velocity (80.0 km/h),
u is the initial velocity (0 m/s since the train starts from rest),
a is the acceleration rate (1.35 m/s²),
and t is the time.
First, we need to convert the final velocity from km/h to m/s:
80.0 km/h = 80.0 × (1000/3600) m/s = 22.22 m/s
Now we can rearrange the equation to solve for time:
t = (v - u) / a = (22.22 - 0) / 1.35 ≈ 43.70 s
(b) To find the time it takes for the train to come to a stop from its top speed, we can use the same equation of motion:
v = u + at
where:
v is the final velocity (0 m/s),
u is the initial velocity (the top speed of the train, which is 22.22 m/s),
a is the deceleration rate (-1.65 m/s² since it's decelerating),
and t is the time.
Now we can rearrange the equation to solve for time:
t = (v - u) / a = (0 - 22.22) / (-1.65) ≈ 48.48 s
(c) To find the emergency deceleration of the train, we can use the equation of motion again:
v = u + at
where:
v is the final velocity (0 m/s),
u is the initial velocity (the top speed of the train, which is 22.22 m/s),
a is the deceleration rate (to be determined),
and t is the time (8.30 s).
Rearranging the equation, we can solve for the deceleration:
a = (v - u) / t = (0 - 22.22) / 8.30 ≈ -2.67 m/s²
The negative sign indicates deceleration, and the magnitude of the deceleration is approximately 2.67 m/s².
Complete question-
a) A light-rail commuter train accelerates at a rate of 1.35 m/s2 . How long does it take to reach its top speed of 80.0 km/h, starting from rest? (b) The same train ordinarily decelerates at a rate of 1.65 m/s2 . How long does it take to come to a stop from its top speed? (c) In emergencies the train can decelerate more rapidly, coming to rest from 80.0 km/h in 8.30 s. What is its emergency deceleration in m/s2 ?
To know more about velocity , click here-
brainly.com/question/80295
#SPJ11
help !
2-A ball is thrown vertically upward with a speed of 25 m/s a. Find its position after 2s. b. Find its velocity at position 30m ?
The problem involves a ball being thrown vertically upward with an initial speed of 25 m/s. The task is to determine: a) the position of the ball after 2 seconds, and b) the velocity of the ball when it reaches a height of 30m.
To solve this problem, we can use the equations of motion for vertical motion under constant acceleration. The key parameters involved are position, time, velocity, and height.
a) To find the position of the ball after 2 seconds, we can use the equation: h = u*t + (1/2)*g*t^2, where h is the height, u is the initial velocity, g is the acceleration due to gravity, and t is the time. By substituting the given values of u and t = 2s into the equation, we can calculate the position of the ball.
b) To find the velocity of the ball at a height of 30m, we can use the equation: v^2 = u^2 + 2*g*h, where v is the final velocity and h is the height. By substituting the known values of u, g, and h = 30m into the equation, we can solve for the velocity.
In summary, we can determine the position of the ball after 2 seconds by using an equation of motion, and find the velocity of the ball at a height of 30m by using another equation of motion. These calculations rely on the initial speed, acceleration due to gravity, and the given time or height values.
Learn more about speed:
https://brainly.com/question/17661499
#SPJ11
Vouwer is incorrect The gauge pressure in your car tires is 2.03 X 10' N/mata temperature of 36.3°C when you drive it onto a ferry boat to Alaska. What is their gauge presure later, when their temperature has dropped to 37.3°C ? 130589 N/? Show hint
Evaluating this expression, we find that the gauge pressure later, when the temperature has dropped to 37.3°C, is approximately 2.04 × 10⁵ N/m² or 130589 N/m².
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, let's convert the initial temperature of 36.3°C to Kelvin by adding 273.15: T₁ = 36.3°C + 273.15 = 309.45 K.
We can calculate the initial number of moles (n) using the ideal gas law. Since the volume (V) remains constant, the ratio of pressure to temperature is constant as well: P₁/T₁ = P₂/T₂.
Substituting the given values, we have P₁/T₁ = (2.03 × 10⁵ N/m²) / 309.45 K.
Now, let's calculate the final pressure (P₂) when the temperature drops to 37.3°C or 310.45 K:
P₂ = (P₁/T₁) × T₂ = (2.03 × 10⁵ N/m²) / 309.45 K × 310.45 K.
Evaluating this expression, we find that the gauge pressure later, when the temperature has dropped to 37.3°C, is approximately 2.04 × 10⁵ N/m² or 130589 N/m².
Learn more about expression here:
https://brainly.com/question/1859113
#SPJ11
a group of students found that the moment of inertia of the plate+disk was 1.74x10-4 kg m2, on the other hand they found that the moment of inertia of the plate was 0.34x10-4 kg m2. What is the value of the moment of inertia of the disk?
By deducting the moment of inertia of the plate from the moment of inertia of the plate and disc, one can determine the moment of inertia of the disc is 1.4 * 10(-4) kg m^2
We can determine the moment of inertia of the disc by multiplying [tex]1.74*10(-4) kg m^2[/tex] by the moment of inertia of the plate, which is [tex]0.34 * 10(-4) kg m^2[/tex].
By deducting the moment of inertia of the plate from the moment of inertia of the plate plus the disc, we can determine the moment of inertia of the disc:
Moment of inertia of the disc is equal to the product of the moments of inertia of the plate and the disc.
Moment of inertia of the disc is equal to
[tex]1.74 * 10-4 kg/m^2 - 0.34 * 10-4 kg/m^2.[/tex]
The disk's moment of inertia is [tex]1.4 * 10(-4) kg m^2[/tex]
As a result, the disk's moment of inertia is equal to 1.4 * 10(-4) kg m^2 .
To learn more about moment of inertia:
https://brainly.com/question/21439277
Arnold Horshack holds the end of a 1.05 kg pendulum at a level at which its gravitational potential energy is 13.00 ) and then releases it. Calculate the velocity of the pendulum as it passes through
Arnold Horshack holds the end of a 1.05 kg pendulum at a level at which its gravitational potential energy is 13.00 and then releases it, the velocity of the pendulum as it passes through the lowest point is approximately 4.97 m/s.
The equation for the conservation of mechanical energy is:
Potential Energy + Kinetic Energy = Constant
13.00 J = (1/2) * (mass) * [tex](velocity)^2[/tex]
13.00 J = (1/2) * (1.05 kg) * [tex](velocity)^2[/tex]
(1/2) * (1.05 kg) * [tex](velocity)^2[/tex] = 13.00 J
(1.05 kg) * [tex](velocity)^2[/tex] = 26.00 J
Now,
[tex](velocity)^2[/tex] = 26.00 J / (1.05 kg)
[tex](velocity)^2[/tex] = 24.76[tex]m^2/s^2[/tex]
velocity = √(24.76 [tex]m^2/s^2[/tex]) ≈ 4.97 m/s
Thus, the velocity of the pendulum as it passes through the lowest point is 4.97 m/s.
For more details regarding velocity, visit:
https://brainly.com/question/30559316
#SPJ4
A 3.00 x 105 kg subway train is brought to a stop from a speed of 1.57 miles per hour in 0.386 m by a large spring bumper at the end of its track. What is the force constant k of the spring? Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23, -2, 146, 5.23e-8 Enter answer here CN/m A spring that is hung from the ceiling stretches 0.422m when a 0.111kg mass is hung from it. The spring is taken down and laid horizontal on a frictionless table and attached by its free end to a rigid wall. With the same mass attached, the spring is then compressed by 0.785m from its rest length and released. Determine the maximum velocity of the mass in this horizontal configuration. Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23,-2, 146, 5.23e-8 Enter answer here m/s
The force constant of the spring is approximately 471,386.5 N/m. The maximum velocity of the mass is around 7.73 m/s.
1. To find the force constant (k) of the spring, we can use Hooke's Law, which states that the force exerted by a spring is proportional to the displacement from its equilibrium position:
F = -k * x,
where F is the force applied, k is the force constant, and x is the displacement. Given information:
- Mass of the subway train (m): 3.00 x 10^5 kg
- Initial speed (v): 1.57 miles per hour = 0.701 meters per second (m/s)
- Stopping distance (x): 0.386 m
To bring the train to a stop, the spring bumper applies a force opposite to the motion of the train until it comes to rest. This force is given by:
F = m * a,
where m is the mass and a is the acceleration.
Using the equation of motion:
v^2 = u^2 + 2 * a * x,
where u is the initial velocity and v is the final velocity,
we can solve for the acceleration (a):
a = (v^2 - u^2) / (2 * x).
Substituting the given values:
a = (0 - (0.701 m/s)^2) / (2 * 0.386 m)
≈ -0.607 m/s^2.
Since the force applied by the spring is opposite to the motion, we can rewrite the force as:
F = -m * a
= -(3.00 x 10^5 kg) * (-0.607 m/s^2).
Using Hooke's Law:
F = -k * x,
we can equate the two expressions for force:
-(3.00 x 10^5 kg) * (-0.607 m/s^2) = -k * 0.386 m.
Simplifying the equation:
k = (3.00 x 10^5 kg * 0.607 m/s^2) / 0.386 m.
Calculating the value:
k ≈ 471,386.5 N/m.
Therefore, the force constant (k) of the spring is approximately 471,386.5 N/m.
2. To find the maximum velocity of the mass in the horizontal configuration, we can use the principle of conservation of mechanical energy. At the maximum compression, all the potential energy stored in the spring is converted into kinetic energy.
The potential energy of the compressed spring is given by:
PE = (1/2) * k * x^2,
where k is the force constant and x is the compression of the spring.
Given information:
- Compression of the spring (x): 0.785 m
- Mass of the object (m): 0.111 kg
The potential energy is converted into kinetic energy at maximum velocity:
PE = (1/2) * m * v_max^2,
where v_max is the maximum velocity.
Setting the potential energy equal to the kinetic energy:
(1/2) * k * x^2 = (1/2) * m * v_max^2.
Simplifying the equation:
k * x^2 = m * v_max^2.
Solving for v_max:
v_max = sqrt((k * x^2) / m).
Substituting the given values:
v_max = sqrt((471,386.5 N/m * (0.785 m)^2) / 0.111 kg).
Calculating the value:
v_max ≈ 7.73 m/s.
Therefore, the maximum velocity of the mass in the horizontal configuration is approximately 7.73 m/s.
To know more about velocity ,click here:
brainly.com/question/30559316
#SPJ11
A planet orbits a star. The period of the rotation of 400 (earth) days. The mass of the star is 6.00 *1030 kg. The mass of the planet is 8.00*1022 kg What is the orbital radius?
The orbital radius of the planet is 8.02 × 10^11 m.
The orbital radius of a planet can be determined using Kepler’s third law which states that the square of the period of an orbit is directly proportional to the cube of the semi-major axis of the orbit. Thus, we have;`T² ∝ a³``T² = ka³`Where T is the period of the orbit and a is the semi-major axis of the orbit.Now, rearranging the formula for k, we have:`k = T²/a³`The value of k is the same for all celestial bodies orbiting a given star. Thus, we can use the period of Earth’s orbit (T = 365.24 days) and the semi-major axis of Earth’s orbit (a = 1 AU) to determine the value of k. We have;`k = T²/a³ = (365.24 days)²/(1 AU)³ = 1.00 AU²`
Thus, we have the relationship`T² = a³`
Multiplying both sides of the equation by `1/k` and substituting the given values of T and m, we get;`a = (T²/k)^(1/3)`The mass of the star is 6.00 * 10^30 kg and the mass of the planet is 8.00 * 10^22 kg. Hence, the value of k can be determined as follows:`k = G(M + m)`Where G is the gravitational constant, M is the mass of the star, and m is the mass of the planet.
Substituting the given values, we have:`k = (6.674 × 10^-11 N m²/kg²)((6.00 × 10^30 kg) + (8.00 × 10^22 kg)) = 4.73 × 10^20 m³/s²`Now, substituting the given value of T into the expression for a, we have;`a = [(400 days)²/(4.73 × 10^20 m³/s²)]^(1/3)``a = 8.02 × 10^11 m`
To know more about radius:
https://brainly.com/question/24051825
#SPJ11
Identify the forces acting on the puck.
Check all that apply. © A. Static friction J, © B. Tension O C. Thrust Filrust
C D. Normal force O e. Weight.
When a hockey puck slides on rough ice after a slapshot, there are several forces that act on it. These forces include weight, normal force, thrust force, and friction forces.
Weight: The weight of the puck is a force that is caused by gravity acting on the puck. This force is always directed downward.
Normal force: The normal force is the force that is perpendicular to the surface on which the puck is sliding. This force is caused by the resistance of the surface and is always directed upwards.
Thrust force: The thrust force is the force that is applied to the puck by the player when they slap the puck. This force is always directed in the direction that the player wants the puck to go.
Friction forces: Friction forces are forces that resist motion and they are caused by the roughness of the ice.
There are two types of friction forces that act on the puck: static friction and kinetic friction.
Static friction: Static friction is the friction force that keeps the puck from moving when it is at rest. When the puck is first hit by the player, there is static friction between the puck and the ice that prevents the puck from moving until the thrust force overcomes it.
Kinetic friction: Kinetic friction is the friction force that acts on the puck when it is sliding on the ice. This force is always directed in the opposite direction to the motion of the puck.
The question should be:
When a hockey puck is sliding on rough ice after being hit with a slapshot, identify the forces that play on it.
A. Static friction J, B. Tension O C. Thrust FilrustC D. Normal force O e. Weight.
Learn more about forces at: https://brainly.com/question/12785175
#SPJ11
Y Part A What is the air pressure at a place where water boils at 60 °C? Express your answer to three significant figures. IVE ΑΣΦ P ? P= Submit Previous Answers Request Answer X Incorrect; Try Again; 5 attempts remaining Provide Feedback Pa Constants Part A If the humidity in a room of volume 450 m³ at 25 °C is 77 %, what mass of water can still evaporate from an open pan? Express your answer to two significant figures and include the appropriate units. HA ? m= Value Units Submit Provide Feedback Next > Request Answer
The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases.
We have to find the atmospheric pressure at a place where the boiling point of water is 60 °C. The boiling point of water depends on the atmospheric pressure. When the atmospheric pressure increases, the boiling point also increases. On the other hand, as the atmospheric pressure decreases, the boiling point also decreases. Thus, we can relate the boiling point of water with atmospheric pressure. The relation is expressed by the following equation: (dp/dt) = (ΔHvap / TΔV).
We know that at standard atmospheric pressure, which is 101.3 kPa, the boiling point of water is 100 °C. Now, we have to find the boiling point of water at 60 °C. The temperature difference between the two boiling points is 40 °C. Thus, we have to find the pressure difference between the two boiling points. We can use the above equation to calculate the pressure difference.Let us assume that the enthalpy of vaporization of water is 40.7 kJ/mol. Also, the change in volume during the transition from liquid to vapor state is 0.018 L/mol.
Thus, dp/dt = (ΔHvap / TΔV) = (40700 J/mol) / (333 K * 0.018 L/mol) = 6635 Pa/KThe boiling point of water at 60 °C is given by, (dp/dt) = (ΔP / ΔT) = ((101.3 kPa - P) / (100 °C - 60 °C)) = 6635 Pa/KSolving for P, we get P = 83.22 kPa.Therefore, the air pressure at a place where water boils at 60 °C is 83.22 kPa.
We have determined that the air pressure at a place where water boils at 60 °C is 83.22 kPa. The boiling point of water is related to atmospheric pressure and we have used the relation between them to calculate the pressure difference between the boiling point of water at 100 °C and 60 °C. By using the value of enthalpy of vaporization and the change in volume during the transition from liquid to vapor state, we have calculated the rate of change of vapor pressure with temperature, which was used to calculate the pressure difference. Finally, we solved for the pressure difference to find the air pressure at a place where water boils at 60 °C.
To know more about boiling point visit:
brainly.com/question/32336971
#SPJ11
49 [Total 5 marks) 1 eV = 1.6x10-19J me = 9.11*10-31 kg P4: One electron with an energy of 189 eV is moving in a circular path and uniform magnetic field of magnitude 70 ut. The magnetic fielded is perpendicular to the velocity vector. Find (a) the frequency of revolution of the electron. [2.5 marks) (b)the radius of the circular path of the electron [2.5 marks)
The frequency of revolution of the electron is approximately 1.92x10¹⁴ Hz. The radius of the circular path of the electron is approximately 5.61x10⁻³ m.
To solve this problem, we can use the equation for the frequency of revolution of a charged particle in a magnetic field:
(a) The frequency of revolution, f, is given by the equation:
f = qB / (2πm)
f is the frequency of revolution
q is the charge of the electron (1.6x10⁻¹⁹ C)
B is the magnitude of the magnetic field (70 μT = 70x10⁻⁶ T)
m is the mass of the electron (9.11x10⁻³¹ kg)
Let's plug in the values:
f = (1.6x10⁻¹⁹ C)(70x10⁻⁶ T) / (2π)(9.11x10⁻³¹kg)
Calculating this expression gives:
f ≈ 1.92x10¹⁴ Hz
So, the frequency of revolution of the electron is approximately 1.92x10¹⁴ Hz.
(b) The radius of the circular path of the electron, r, can be determined using the equation for the centripetal force:
F = qvB = mv² / r
F is the force acting on the electron due to the magnetic field
v is the velocity of the electron
Since the electron is moving in a circular path, we can equate the centripetal force to the magnetic force:
qvB = mv² / r
Simplifying and solving for r, we get:
r = mv / (qB)
Let's calculate the radius using the given values:
r = (9.11x10⁻³¹ kg)(√(2(189 eV)(1.6x10⁻¹⁹ J/eV))) / ((1.6x10⁻¹⁹ C)(70x10⁻⁶ T))
Calculating this expression gives:
r ≈ 5.61x10⁻³ m
Therefore, the radius of the circular path of the electron is approximately 5.61x10⁻³ m.
Learn more about frequency at: https://brainly.com/question/254161
#SPJ11
A weightlifter curls a 33 kg bar, raising it each time a distance of 0.50 m. How many times must he repeat this exercise to burn off the energy in one slice of pizza?What is the change in the thermal energy of the gas? Express your answer using two significant figures.
The weightlifter would need to repeat the exercise approximately 8 times to burn off the energy in one slice of pizza.
To determine how many times the weightlifter must repeat the exercise to burn off the energy in one slice of pizza, we need to calculate the energy burned in one repetition and then compare it to the energy content of the pizza slice.
The energy burned in lifting the bar can be calculated using the equation:
Energy = force × distance
The weightlifter is essentially working against the gravitational force when lifting the bar, so the force can be calculated using:
Force = mass × acceleration due to gravity
The acceleration due to gravity is approximately 9.8 m/s².
Let's calculate the energy burned in one repetition:
Force = mass × acceleration due to gravity
= 33 kg × 9.8 m/s²
≈ 323.4 N
Energy = force × distance
= 323.4 N × 0.50 m
= 161.7 J
Now let's determine the energy content of one slice of pizza. This value can vary depending on the type of pizza and its ingredients, but let's assume an average value.
Assuming the energy content of one slice of pizza is 300 Calories, we can convert it to joules:
1 Calorie = 4.184 J
Energy content of one slice of pizza = 300 Calories × 4.184 J/Calorie
= 1255.2 J
To find out how many times the weightlifter must repeat the exercise to burn off the energy in one slice of pizza, we can divide the energy content of the pizza by the energy burned in one repetition:
Number of repetitions = Energy content of pizza / Energy burned in one repetition
= 1255.2 J / 161.7 J
≈ 7.75
Therefore, the weightlifter would need to repeat the exercise approximately 8 times to burn off the energy in one slice of pizza.
To learn more about energy click here:
brainly.com/question/20709218
#SPJ11
an A car initially Travelling at 24 mith slows to rest in sos. What is the car's acceleration ? take smile - 460g 3m, 1 hour = 60 min, Aminubes 60 seconds. A Force, applied boane care se A to object of ma produces an acceleration of honums the same forces is applied to a second object of mass me produces an acceleration , of 4, 81 mls. What is the value of the Tralis malme?
A car initially Travelling at 24 mith slows to rest in sos, The car's acceleration is -4 m/s².
To determine the car's acceleration, we can use the equation of motion:
v² = u² + 2as
where:
v = final velocity (0 m/s, since the car comes to rest)
u = initial velocity (24 m/s)
a = acceleration (unknown)
s = displacement (unknown)
Rearranging the equation, we have:
a = (v² - u²) / (2s)
Since v = 0 and u = 24 m/s, the equation becomes:
a = (0 - 24²) / (2s)
To find the value of s, we need to use the equation of motion:
s = ut + (1/2)at²
Given that t = 5 seconds, we have:
s = 24(5) + (1/2)(-4)(5²)
s = 120 - 50
s = 70 meters
Now we can substitute the values into the initial equation to calculate the acceleration:
a = (0 - 24²) / (2 * 70)
a = -576 / 140
a ≈ -4 m/s²
Therefore, the car's acceleration is approximately -4 m/s², indicating that it decelerates at a rate of 4 m/s². The negative sign indicates that the acceleration is in the opposite direction of the initial velocity.
To know more about acceleration, refer here:
https://brainly.com/question/30499732#
#SPJ11
You drink a small glass of water that is 99.9999% pure water and 0.0001% some poison. Assume the glass contains about a 1,000,000 million trillion molecules, which is about 30 mL ▾ Y Part A How many polsón molecules did you just drink? Express your answer using one significant figure. || ΑΣΦ 4 → PRE N= Submit Request Answer Part B Should you be concemed? no Oyes O ? million trillion poison molecules
When drinking a small glass of water that is 99.9999% pure water and 0.0001% poison, we can calculate the number of poison molecules consumed and determine whether there is cause for concern.
Given that the glass contains about 1,000,000 million trillion molecules, we can calculate the quantity of poison molecules based on the given percentage.
(a) To calculate the number of poison molecules, we can multiply the total number of molecules in the glass by the percentage of poison. In this case, 0.0001% is equivalent to 0.000001, or 1 in 1,000,000. Multiplying this fraction by the total number of molecules in the glass, we can determine the approximate number of poison molecules consumed, using one significant figure.
(b) Whether one should be concerned depends on the nature and toxicity of the poison. If the quantity of poison molecules consumed is relatively low, it may not pose a significant risk. However, if the poison is highly toxic or even a small quantity can cause harm, there may be cause for concern. It is essential to consider the toxicity of the specific poison and consult with a healthcare professional or poison control center for appropriate guidance.
In summary, by multiplying the total number of molecules in the glass by the given percentage, we can estimate the number of poison molecules consumed. Whether there is cause for concern depends on the toxicity of the poison and the quantity consumed. It is always advisable to seek professional medical advice in cases involving potential ingestion of harmful substances.
Learn more about molecules here :
brainly.com/question/32298217
#SPJ11
A person exerti a forco of 48 N an the end of a door 85 cm Part A wide What is the nugntude of the farque if the larce is exerted perpendicular to the docr? Part B What in the magritude of the tceque if the force is eected at a 45 angle to the face of ifus door?
Part A: The magnitude of the torque if the force is exerted perpendicular to the door is 40.8 Nm.
Part B: The magnitude of the torque if the force is exerted at a 45° angle to the face of the door is 28.56 Nm.
Force exerted, F = 48 N
Width of the door, d = 85 cm = 0.85 m
Part A:
The torque is given by the product of the force and the perpendicular distance from the axis of rotation to the line of action of the force.
Torque = Force × perpendicular distance
Since the force is exerted perpendicular to the door, the perpendicular distance is the same as the width of the door.
Therefore, the torque is given by,
Torque = F × d
= 48 N × 0.85 m
= 40.8
Hence, the magnitude of the torque if the force is exerted perpendicular to the door is 40.8 Nm.
Part B:
The torque due to a force acting at an angle to the door is given by the product of the force, the perpendicular distance to the line of action of the force and the sine of the angle between the force and the perpendicular distance.
Torque = F × d × sin θ
where θ is the angle between the force and the perpendicular distance.
The perpendicular distance is still equal to the width of the door, which is 0.85 m.
Therefore, the torque is given by,
Torque = F × d × sin θ
= 48 × 0.85 × sin 45°
= 28.56 Nm
Therefore, the magnitude of the torque if the force is exerted at a 45° angle to the face of the door is 28.56 Nm.
Learn more about the torque:
brainly.com/question/17512177
#SPJ11
A spherical mirror forms an inverted image 4.00 times larger than the size of the object. If the distance between the object and the image is 0.600 m, show that the mirror is both converging and has a focal length of 16.0 cm. Main Physics Concept: Given information: Gool/5: P=E/T Solution [with sketch or diagram, if applicable]:
In this scenario, a spherical mirror forms an inverted image that is 4.00 times larger than the size of the object.
The distance between the object and the image is given as 0.600 m. The task is to show that the mirror is both converging and has a focal length of 16.0 cm.
To determine whether the mirror is converging or diverging, we can use the magnification equation, which states that the magnification (M) is equal to the ratio of the image height (h') to the object height (h). In this case, the given magnification is 4.00, indicating that the image is larger than the object and inverted.
Since the image is inverted, this suggests that the mirror is a converging mirror, specifically a concave mirror. In a concave mirror, the focal length (f) is positive.
Next, we can use the mirror formula, 1/f = 1/d_o + 1/d_i, where f is the focal length, d_o is the object distance, and d_i is the image distance. The given object and image distances are 0.600 m. By substituting the values into the formula, we can solve for the focal length (f) and show that it is equal to 16.0 cm.
Learn more about spherical mirror here: brainly.com/question/16762350
#SPJ11
In the R-C Circuit experiment, at (t = 0) the switch is closed and the capacitor starts discharging. The voltage across the capacitor was recorded as a function of time according to the equation V=vies 9 8 7 6 5 Vc(volt) 4 3 2 1 0 10 20 30 10 50 t(min) From the graph, the time constant T in second) is 480
In the given RC circuit experiment, the switch is closed at t=0, and the capacitor starts discharging. The voltage across the capacitor has been recorded concerning time. The data for the voltage across the capacitor is given as follows:
V = Vies9 8 7 6 5
Vc (volt)4 3 2 1 0102030405060 t (min)
The time constant of the RC circuit can be calculated by the following formula:
T = R*C Where T is the time constant, R is the resistance of the circuit, and C is the capacitance of the circuit. As we know that the graph of the given data is an exponential decay curve, the formula for the voltage across the capacitor concerning time will be:
Vc = V0 * e^(-t/T)Where V0 is the initial voltage across the capacitor. We can calculate the value of the time constant T by using the given data. From the given graph, the voltage across the capacitor at t=480 seconds is 2 volts.
The formula will be:2 = V0 * e^(-480/T) Solving for T, we get:
T = -480 / ln(2)
≈ 693 seconds.
To know more about circuit visit:
https://brainly.com/question/12608516
#SPJ11
Mickey, a daredevil mouse of mass 0.0229 kg, is attempting to become the world's first "mouse cannonball." He is loaded into a spring-powered gun pointing up at some angle and is shot into the air. The gun's spring has a force constant of 94.7 N/m and is initially compressed a distance of 0.123 m from its relaxed position. If Mickey has teonstant horizontal speed of 2.33 m/s while he is flying through the air, how high h above his initial location in the gun does Mickey soar? Assume g=9.81 m/s 2
.
Given parameters:Mass of Mickey, m
= 0.0229 kgInitial compression of the spring, x
= 0.123 mSpring constant, k
= 94.7 N/mInitial horizontal speed of Mickey, vx
= 2.33 m/sAcceleration due to gravity, g
= 9.81 m/s²Let’s calculate the vertical component of Mickey's initial velocity.
Velocity of Mickey
= √(v² + u²)wherev
= horizontal speed of Mickey
= 2.33 m/su
= vertical speed of MickeyTo calculate the vertical component, we'll use the principle of conservation of energy.Energy stored in the compressed spring is converted into potential energy and kinetic energy when the spring is released.Energy stored in the spring = Kinetic energy of Mickey + Potential energy of MickeyLet’s consider that the Mickey reaches the maximum height h from the ground level, where its vertical speed becomes zero. At this point, all the kinetic energy will be converted to potential energy, i.e.Kinetic energy of Mickey = Potential energy of Mickeymv²/2 = mghwherev = vertical velocity of Mickeym = mass of Mickeyg = acceleration due to gravityh = maximum height that Mickey reached from the ground levelNow, we can write the equation for energy stored in the compressed spring and equate it with the potential energy of Mickey.
To know more about compression visit:
https://brainly.com/question/22170796
#SPJ11
If we could measure the overall curvature of cosmic space and found it to be negative, then we would conclude that the universe ____.
A. will expand forever
B. is expanding faster than we thought
C. is neither expanding nor contracting now
D. is actually contracting now
The correct option for the following question is A. will expand forever. If we could measure the overall curvature of cosmic space and found it to be negative, then we would conclude that the universe will expand forever.
The curvature of cosmic space is determined by the amount of matter and energy present in the universe. There are three possible curvatures: positive curvature (closed or spherical), negative curvature (open or hyperbolic), and zero curvature (flat).
In the case of a negative curvature, the geometry of space is open and extends infinitely. This indicates that the gravitational pull of matter and energy is not strong enough to halt the expansion of the universe. Thus, the universe will continue to expand indefinitely. Therefore, if the overall curvature of cosmic space is measured to be negative, we would conclude that the universe will expand forever.
If the overall curvature of cosmic space is negative, it indicates that the universe will expand forever. The negative curvature implies an open geometry where the expansion will continue indefinitely due to the lack of sufficient gravitational forces to stop it.
Learn more about ” curvature” here:
brainly.com/question/29595940
#SPJ11
Determine the magnitude and direction of the electric field at a
point in the middle of two point charges of 4μC and −3.2μC
separated by 4cm?
The electric field is 14.4 N/C. To determine the magnitude and direction of the electric field at a point in the middle of two point charges, we can use the principle of superposition.
The electric field at the point will be the vector sum of the electric fields created by each charge individually.
Charge 1 (q1) = 4 μC = 4 × 10^-6 C
Charge 2 (q2) = -3.2 μC = -3.2 × 10^-6 C
Distance between the charges (d) = 4 cm = 0.04 m
The electric field created by a point charge at a distance r is given by Coulomb's Law:
E = k * (|q| / r^2)
E is the electric field,
k is the electrostatic constant (k ≈ 9 × 10^9 N m^2/C^2),
|q| is the magnitude of the charge, and
r is the distance from the charge.
Electric field created by q1:
E1 = k * (|q1| / r^2)
= (9 × 10^9 N m^2/C^2) * (4 × 10^-6 C / (0.02 m)^2)
= 9 × 10^9 N m^2/C^2 * 4 × 10^-6 C / 0.0025 m^2
= 9 × 10^9 N / C * 4 × 10^-6 / 0.0025
= 14.4 N/C
The electric field created by q1 is directed away from it, radially outward.
Learn more about magnitude here : brainly.com/question/28714281
#SPJ11
What is the self-inductance of an LC circuit that oscillates at 60 Hz when the capacitance is 10.5 µF? = H
The self-inductance (L) of an LC circuit that oscillates at 60 Hz with a capacitance of 10.5 µF is approximately 1.58 H. The self-inductance of the circuit plays a crucial role in determining its behavior and characteristics, including the frequency of oscillation.
To calculate the self-inductance (L) of an LC circuit that oscillates at 60 Hz with a capacitance of 10.5 µF, we can use the formula for the angular frequency (ω) of an LC circuit:
ω = 1 / √(LC)
Where ω is the angular frequency, L is the self-inductance, and C is the capacitance.
Rearranging the formula to solve for L:
L = 1 / (C * ω²)
Given the capacitance C = 10.5 µF and the frequency f = 60 Hz, we can convert the frequency to angular frequency using the formula:
ω = 2πf
ω = 2π * 60 Hz ≈ 376.99 rad/s
Substituting the values into the formula:
L = 1 / (10.5 × 10⁻⁶ F × (376.99 rad/s)²)
L ≈ 1 / (10.5 × 10⁻⁶ F × 141,573.34 rad²/s²)
L ≈ 1.58 H
Therefore, the self-inductance of the LC circuit is approximately 1.58 H. The self-inductance of the circuit plays a crucial role in determining its behavior and characteristics, including the frequency of oscillation.
To know more about circuit refer here:
https://brainly.com/question/23622384#
#SPJ11