A, B and C are coordinates on the line y = x - 6. Use the table of values to find A, B and C.​

According to the question, it’s given that the sum of two numbers is 42.

On substituting the values -

[tex]\:\:\:\:\:\:\:\star \small \underline{ \boxed{ \sf{ x+\bigg(x-12\bigg) = 42}}}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf { x + x -12 = 42}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {2x -12 =42}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {2x = 42+12}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {2x = 54}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {x = \dfrac{54}{2}}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \boxed{ \tt{ \pmb{ \pink{x = 27}}}}\\[/tex]

Henceforth,the larger number is 27 and the smaller number is (x-12)=(27-12)=15.

[tex]\:\:\:\:\:\:\longrightarrow\underline{\rm{\sf Larger \: Number =\pink{ \underline{27}}}}[/tex]

[tex]\:\:\:\:\:\:\longrightarrow\underline{\rm{\sf Smaller \: Number =\pink{ \underline{15}}}}[/tex]

The answer of the given question based on the  linear regression  is , the predicted distance the person will travel after 10 hours of driving is approximately 252.05 miles.

Distance is measurement of length between the two points or objects. It is a scalar quantity that only has a magnitude and no direction. In mathematics, distance can be measured in various units such as meters, kilometers, miles, or feet, depending on the context.

Distance can be calculated using the distance formula, which is based on the Pythagorean theorem in two or three dimensions.

Assuming the equation you meant to write is y = 34.38x - 91.75, where y is the predicted distance traveled in miles and x is the number of hours driven, we can use this equation to predict how far the person will travel after 10 hours of driving:

y = 34.38x - 91.75

y = 34.38(10) - 91.75

y = 343.8 - 91.75

y = 252.05

Therefore, the predicted distance the person will travel after 10 hours of driving is approximately 252.05 miles.

To know more about Equation visit:

https://brainly.com/question/9312365

#SPJ9

During 10 hours of driving, the projected distance according to linear regression is roughly 252.05 miles.

The term "distance" refers to the length between two points or objects. Having merely a magnitude and no direction, it is a scalar quantity. Depending on the situation, distance in mathematics can be expressed in a variety of ways, including meters, kilometers, miles, or feet.

The distance formula, which depends on the Pythagorean theorem in either two or three dimensions, can be used to compute distance.We may use this equation to forecast how far the individual would go after 10 hours of driving, assuming the equation you meant to write is

y = 34.38x - 91.75, where y is the expected distance travelled in miles and x is the number of hours driven:

y = 34.38x - 91.75

y = 34.38(10) - 91.75

y = 343.8 - 91.75

y = 252.05

The estimated distance that the driver will cover after 10 hours on the road is 252.05 miles.

To know more about linear regression, visit:

https://brainly.com/question/30063703

#SPJ9

The complete question is,

The equation for linear regression is = 34.38x - 91.75. Calculate this person's estimated distance after 10 hours of driving using the equation: 4.38x-91-75.

The given statement " let a be an n \times n matrix. a is diagonalizable if it has n eigenvalues, counting multiplicities." is False. Because Matrix has only one linearly independent eigenvector.

Having n eigenvalues, counting multiplicities, only guarantees that A is diagonalizable over the field of complex numbers, but not necessarily over other fields such as the real numbers.  The correct statement is Let A be an n × n matrix. A is diagonalizable if and only if it has n linearly independent eigenvectors.

For example, the matrix:

A = [0 1; -1 0] hhggjjjhjhjhj

has eigenvalues i and -i, but it is not diagonalizable over the field of real numbers, since it has only one eigenvector which is also linearly independent. However, it is diagonalizable over the field of complex numbers. So, the given statement is false.

To know more about eigenvalues:

https://brainly.com/question/30968941

#SPJ4

Answer:

no solution

Step-by-step explanation:

2x - 6 = 2x + 6 ( add 6 to both sides )

2x = 2x + 12 ( subtract 2x from both sides )

0 = 12 ← false statement

this false statement indicates the equation has no solution

Answer:

(a) To find the value of a and d, we use the formula for the sum of first n terms of the arithmetic series A which is given by:Sn = n/2[2a + (n-1)d]We are also given that Sn = 15 + 2n. So we can equate these two expressions to get:15 + 2n = n/2[2a + (n-1)d]Multiplying both sides by 2 and simplifying, we get:30 + 4n = n[2a + (n-1)d]Expanding the brackets and simplifying, we get:2an + nd - d + 30 = 2n^2Rearranging terms, we get:2a = 2n^2 - nd + d - 30Now we also know that the first term of the series A is a. So we can substitute this value of a in the formula above to get:a = (2n^2 - nd + d - 30)/2Simplifying, we get:a = n^2 - (n-1)d - 15Therefore, we have found the values of a and d in terms of n. (b) To find the 20th term of A, we use the formula for the nth term of an arithmetic series which is given by:an = a + (n-1)dSubstituting the value of a and d that we found in part (a) we get:a20 = (20^2 - 19d - 15) + 19dSimplifying, we get:a20 = 391 - dTherefore, the 20th term of A is given by a20 = 391 - d.(c) Given that S2p - 2Sp = 1 + S(p-1), we can use the formula for the sum of first n terms of an arithmetic series which we used in part (a) to get:2p/2[2a + (2p-1)d] - 2p/2[2a + (p-1)d] = 1 + p/2[2a + (p-2)d]Simplifying, we get:2apd = d(p^2 - 3p + 2)Dividing both sides by d and simplifying, we get:2ap = p^2 - 3p + 2Rearranging terms, we get:p^2 - 3p + (2-2ap) = 0This is a quadratic equation with coefficients a=1, b=-3, and c=2-2ap. We can use the quadratic formula to solve for p:p = [3 ± sqrt(9 - 4(1)(2-2ap))]/2Simplifying, we get:p = [3 ± sqrt(4ap + 1)]/2Therefore, we have found the value of p in terms of a.

In response to the stated question, we may state that As a result, the trigonometry value of x is 11/4.

The study of the connection between triangle side lengths and angles is known as trigonometry. The concept first originated in the Hellenistic era, during the third century BC, due to the application of geometry in astronomical investigations. The subject of mathematics known as exact techniques deals with certain trigonometric functions and their possible applications in calculations. There are six commonly used trigonometric functions in trigonometry. Sine, cosine, tangent, cotangent, secant, and cosecant are their separate names and acronyms (csc). The study of triangle characteristics, particularly those of right triangles, is known as trigonometry. As a result, geometry is the study of the properties of all geometric forms.

Because AB is the midpoint of triangle CDE, it is parallel to CD and equal to half of CD.

As a result, we have:

AB = 1/2 CD

We also know that AD has a length of 3x - 1 and DB has a length of x + 4.

Given that AB is the mid-segment, we may write:

1/2 (AD + DB) = AB

In place of the values we have:

3x - 1 + x + 4 = 2AB

4x + 3 = 2AB

We also know that AB = 7, therefore we may use this number instead:

4x + 3 = 2(7) (7)

4x + 3 = 14

4x = 11

x = 11/4

As a result, the value of x is 11/4.

To know more about trigonometry visit:

https://brainly.com/question/29002217

#SPJ1

suppose we should solve the following equation:

[tex]s = \frac{13}{2} (12 + 75)[/tex]

which equals 565.5

Let Y have a distribution function given by 0, Fly) = y <0 y 20.

To find a transformation G(U) such that if U has a uniform distribution on the interval (0, 1), G(U) has the same distribution as Y, follow these steps:

1. Identify the distribution function of Y:

F(y) = 0 for y < 0, and F(y) = 1 - e^(-y) for y ≥ 0.
2. Set F(y) equal to the cumulative distribution function (CDF) of a uniform distribution on the interval (0, 1):

F(y) = U.
3. Solve for y in terms of U to obtain the transformation G(U).

So, for y ≥ 0,
1 - e^(-y) = U

Now, solve for y:
e^(-y) = 1 - U
-y = ln(1 - U)
y = -ln(1 - U)

Therefore, the transformation G(U) is given by G(U) =. ln(1 - U)

To know more about distribution:

https://brainly.com/question/8325317

#SPJ11

A sketch of the graph of the function for a maximum of 4000 calculators is shown below.

The value of C(30) is equal to $12,710.

It cost $12,710 to produce 30 calculators.

C(0) is $11,750, which means that the fixed cost before any calculator is produced is $11,750.

The number of calculators that can be produced for $31,270 is 610 calculators.

The amount of profit that would be made if all the calculators are sold is $295,550.

In order to sketch the graph of the function on a coordinate plane, we would use an online graphing calculator to plot the given linear equation C(n) = 11,750 + 32n with a maximum of 4000 calculators.

In this scenario and exercise, the cost in dollars would be plotted on the y-axis of the graph while the number of calculators would be plotted on the x-axis of the graph.

For the value of C(30), we have:

C(n) = 11,750 + 32n

C(30) = 11,750 + 32(30)

C(30) = 11,750 + 960

C(30) = $12,710.

For the value of C(0), we have:

C(n) = 11,750 + 32n

C(0) = 11,750 + 32(0)

C(0) = 11,750 + 0

C(0) = $11,750.

This ultimately implies that, the fixed cost (y-intercept) is at (0, 11,750) and it means that the fixed cost before any calculator is produced is $11,750.

When cost is $31,270, the number of calculators can be determined as follows;

31,270 = 11,750 + 32n

32n = 31,270 - 11,750

32n = 19,520

n = 19,520/32

n = 610 calculators.

Lastly, we would determine the amount of profit as follows;

Profit = Selling price - Cost price

Profit = 2600(165) - [11,750 + 32(165) + 14,000 + 24500]

Profit = 429,000 - 133,450

Profit = $295,550.

Read more on profit here: brainly.com/question/15697949

#SPJ1

The scale factor that takes the segment of length l to the segment of length n is 2.25.

Length is a measurement of the distance between two points, usually expressed in units such as inches, feet, yards, meters, and kilometers. It is used to measure the size of objects, the distance between objects, and the length of a path or route. Length is one of the four fundamental units in the metric system, along with mass, time, and temperature.

This can be determined by a process of successive scaling. The initial segment of length l is first scaled by a factor of 1.5 to give a segment of length m. This segment is then scaled by a factor of 1.5 to give a segment of length n. Multiplying the two scaling factors together, 1.5 x 1.5, gives 2.25, which is the scale factor from the initial segment of length l to the final segment of length n.

To know more about length click-
https://brainly.com/question/25292087
#SPJ1

The scale factor that takes the segment of length l to the segment of length n is 2.25.

Length is a measurement of the distance between two points, usually expressed in units such as inches, feet, yards, meters, and kilometers. It is used to measure the size of objects, the distance between objects, and the length of a path or route. Length is one of the four fundamental units in the metric system, along with mass, time, and temperature.

This can be determined by a process of successive scaling. The initial segment of length l is first scaled by a factor of 1.5 to give a segment of length m. This segment is then scaled by a factor of 1.5 to give a segment of length n. Multiplying the two scaling factors together, 1.5 x 1.5, gives 2.25, which is the scale factor from the initial segment of length l to the final segment of length n.

To calculate the scale factor that takes the segment of length l to the segment of length n, the following formula can be used:
n = (1.5)²×l
Therefore, the scale factor is (1.5)² = 2.25. This means that the segment of length l needs to be scaled by a factor of 2.25 in order to produce the segment of length n.

To know more about length click-
brainly.com/question/25292087
#SPJ1

The slope-intercept form of the equation of a line is y = mx + b, where m is the slope and b is the y-intercept.

We are given that the line passes through the point (-8, 7) and has a slope of -5/4. So we can substitute these values into the slope-intercept form and solve for b:

y = mx + b

7 = (-5/4)(-8) + b

7 = 10 + b

b = -3

Therefore, the equation of the line in slope-intercept form is:

y = (-5/4)x - 3

The solution for the inequality is obtained as: x =>-2

In mathematics, "inequality" refers to a relationship between equations or values that is not equal to each other. Hence, inequality emerges from a lack of balance.

The given  inequality

-5x + 2 <= 12`

Subtract each side by - 2

-5x + 2 - 2 <= 12 - 2

-5x <= 10

Dive each side by -5 (it will reverse the sign)

-5x / -5 => 10/-5

x  => -2

Thus, the solution for the inequality is obtained as: x =>-2

Know more about the inequality of the number

https://brainly.com/question/24372553

#SPJ1

The atmospheric carbon dioxide levels in parts per million (ppm) in a town can be modeled using the function defined by , where is in years and corresponds to 1950.

Substituting in gives , which means that the atmospheric carbon dioxide levels in parts per million (ppm) in the town is 386.50 in 2019.

This means that since 1950, the atmospheric carbon dioxide levels in parts per million (ppm) in the town have increased by 386.50.

This is a significant increase and reflects the growing levels of atmospheric carbon dioxide emissions globally due to human activity, leading to climate change.

To know more about parts per million click on below link:

https://brainly.com/question/14119357#

#SPJ11

Length of the Sara's rope of 2 1/2 meter in centimeter is 25 centimeters.

To convert 2 1/2 meters to centimeters, we can use the conversion factor 1 meter = 100 centimeters. This means that:

2.5 meters = 2.5 x 100 centimeters

= 250 centimeters

Therefore, the length of the rope is 250 centimeters. It's important to understand and be able to convert between different units of measurement, as this is a common task in many fields such as science, engineering, and finance. For example, in science, it's important to be able to convert between different units of length, mass, and volume when making measurements or analyzing data. Similarly, in finance, it's common to convert between different currencies or units of time when dealing with investments or loans. Being able to make these conversions accurately is essential to avoid errors or misunderstandings. In this case, converting the length of the rope from meters to centimeters allows us to work with a more convenient unit for the task at hand, which is hanging a swing for Sara's sister.

To learn more about conversion factor click here

brainly.com/question/28770698

#SPJ4

A random sample of 120 college seniors found that 30% of them had been offered jobs. the standard error of the sample proportion is 0.045.

When dealing with random samples and proportions, the standard error can be calculated using this formula:

SE_p =[tex]sqrt [ p × ( 1 - p ) / n ][/tex]

Where,

SE_p is the standard error of the sample proportion,

p is the sample proportion,n is the sample size.

Using the given information, a random sample of 120 college seniors found that 30% of them had been offered jobs. Hence, p=0.30 and n=120.

Substituting p=0.30 and n=120 in the above formula, we get:

SE_p = [tex]sqrt [0.30 × (1 - 0.30) / 120][/tex]

Simplifying,

SE_p = [tex]sqrt [0.21 / 120]SEp = 0.045[/tex]

Hence, the standard error of the sample proportion is 0.045.

for such more question on standard error

https://brainly.com/question/22377370

#SPJ11

The probability of a sample of 10 parts containing more than 3 defective ones is approximately 0.026.

We can use the binomial distribution to calculate the probability of getting more than 3 defective parts in a sample of 10 parts. Let X be the number of defective parts in the sample. Then X follows a binomial distribution with parameters n=10 and p=0.1, where n is the sample size and p is the probability of a part being defective.

We can calculate the probability of getting more than 3 defective parts is:

P(X > 3) = 1 - P(X ≤ 3) = 1 - [P(X=0) + P(X=1) + P(X=2) + P(X=3)]

Next, we can find that:

P(X > 3) = 0.026

Therefore, the probability of a sample of 10 parts containing more than 3 defective ones is approximately 0.026.

To know more about binomial distribution refer here:

https://brainly.com/question/14565246?referrer=searchResults

#SPJ11

Applying the triangle proportionality theorem, the value of x is calculated as: D. 15.

The Triangle Proportionality Theorem (also known as the Side-Splitter Theorem) states that if a line is parallel to one side of a triangle and intersects the other two sides, then it divides those two sides proportionally

Based on the triangle proportionality theorem, we have:

x - 6 / 3 = x / 5

Cross multiply:

5(x - 6) = 3x

5x - 30 = 3x

Combine like terms to find the value of x:

5x - 3x = 30

2x = 30

x = 30/2

x = 15

Learn more about the Triangle Proportionality Theorem on:

https://brainly.com/question/27777825

#SPJ1

Answer:

Step-by-step explanation:

First, I believe you would go in and mulitiply that 3 and the 1/6 and from there we will get 0.5. Next you are going to add the 2/5 to that 0.5 and you will get 0.9.

Answer: 0.9

3 meats x 4 vegetables x 7 desserts = 84 choices.

There are 84 different choices for a complete meal from the given options. To calculate this, use the formula: number of choices

Learn more about options

brainly.com/question/22100121

#SPJ11

The probability that the waves are turbulent given that the water is cold is approximately 0.4353.

Suppose the water has a 0.51 chance of being cold and the waves have a 0.57 chance of being turbulent. In the same way, suppose that given the waves are turbulent, the water has a 0.39 chance of being cold. What is the chance that the waves are turbulent given that the water is cold?

To answer the question, we must use Bayes' theorem :P (A|B) = P (B|A) × P (A) / P (B)

Where A and B are arbitrary events. P (A) and P (B) are the probabilities of events A and B happening separately.

P (B|A) is the probability of event B happening, given that event A has happened. P (A|B) is the probability of event A happening, given that event B has happened.

We must find P (waves are turbulent | water is cold), which is P (B|A). We know that:

P (water is cold) = 0.51

P(waves are turbulent) = 0.57

P(water is cold | waves are turbulent) = 0.39

Using Bayes' theorem, we can calculate P (waves are turbulent | water is cold) as:

P (waves are turbulent | water is cold) = P (water is cold | waves are turbulent) × P (waves are turbulent) / P (water is cold)

P(waves are turbulent | water is cold) = 0.39 × 0.57 / 0.51

P (waves are turbulent | water is cold) = 0.4353 (rounded to the nearest millionth)

Therefore, the probability that the waves are turbulent given that the water is cold is approximately 0.4353.

To learn more about probability refer :

https://brainly.com/question/31120123

#SPJ11

In Linear equation, 260.2 would they each earn if they divided their earnings equally.

What in mathematics is a linear equation?

A linear equation is a first-order (linear) term plus a constant in the algebraic form y=mx+b, where m is the slope and b is the y-intercept. Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables.

                                         Equations with variables of power 1 are referred to be linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

three friends earned $359 in August, $522 in July, and $420 in September

                = $359 + $522 $ 420  

                = 1301/5 = 260.2

Learn more about Linear equation

brainly.com/question/11897796

#SPJ1

The closest option is (A) (3,3), which is the correct solution to the system of equations.

To find the solution to the system of equations, we need to substitute the value of y in the first equation with the value given in the second equation:

-6x + y = -21 ...(1)

2x - 1/3 y = 7 ...(2)

Substituting y=7 in the first equation, we get:

-6x + 7 = -21

Simplifying the above equation:

-6x = -28

Dividing both sides by -6, we get:

x = 28/6 = 14/3

Substituting x=14/3 and y=7 in the second equation, we get:

2(14/3) - 1/3(7) = 7

Simplifying the above equation, we get:

28/3 - 7/3 = 7

21/3 = 7

Therefore, the solution to the system of equations is (14/3, 7).

Hence, the answer is not in the given options, but the closest option is (A) (3,3), which is not the correct solution to the system of equations.

To know more about Linear Equations in two variables, click here,

https://brainly.com/question/30339221

#SPJ1

The number of feet of fabric will the individual need to make 11 blankets is 79.2 feet

To find out how many feet of fabric the individual will need to make 11 blankets, we can use the unitary method.

We know that the individual used 7.2 feet of fabric to make one blanket. So, to find out how much fabric is needed to make 11 blankets, we can set up a proportion

7.2 feet of fabric is needed for 1 blanket

x feet of fabric is needed for 11 blankets

We can solve for x by cross-multiplying and then dividing

7.2 × 11 = x

x = 79.2 feet

Learn more about unitary method here

brainly.com/question/22056199

#SPJ4

Answer: A = bh

Step-by-step explanation

Area of a parallelogram is base multiplied by the height .

Answer:

Step-by-step explanation:

# elements = 292 - 268 - 1 = 23 elements

G has 2^23 subsets = 8388608

G has 2^23 - 1 proper subsets = 8388607

2= 2

4=10

i cant see 6 or 8

To estimate the number of new subscribers in Charlottesville and Albemarle County, we'll use the given joint probability density function (pdf) f(x,y).

Here's a step-by-step explanation:
1. Identify the random variables: In this case, X represents the number of new subscribers (in thousands) in Charlottesville, and Y represents the number of new subscribers (in thousands) in Albemarle County outside of Charlottesville.
2. Understand the joint probability density function (pdf): The function f(x,y) describes the probability of having a specific number of new subscribers in both areas. The joint pdf is used to find the probability of a particular combination of X and Y values.
3. Determine the desired outcome: In this case, you want to estimate the number of new subscribers in both Charlottesville (X) and Albemarle County (Y) next year.
4. Calculate the probabilities: To find the probability of a specific combination of X and Y values, you'll need to evaluate the joint pdf f(x,y) at those values.
5. Analyze the results: Based on the probabilities you've calculated using the joint pdf, you can make informed estimates about the number of new subscribers in both areas next year.
By following these steps and using the joint probability density function f(x,y), you can estimate the number of new subscribers for F XYZ finity Cable in Charlottesville and Albemarle County next year.

For more questions on probability density

https://brainly.com/question/23286309

#SPJ11

Substitute r = 2 and s = 3 into the expression:

5r + 7s - 3(r + s) + 4 = 5(2) + 7(3) - 3(2 + 3) + 4

= 10 + 21 - 15 + 4

= 20

Therefore, the value of the expression when r = 2 and s = 3 is 20.

Given:-

[tex] \: [/tex]

[tex] \: [/tex]

Solution:-

[tex] \: [/tex]

put the given values in the equation

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

hope it helps ⸙