A builder is purchasing a rectangular plot of land with frontage on a road for the purpose of constructing a rectangular warehouse. Its floor area must be 300,000 square feet. Local building codes require that the building be set back 40 feet from the road and that there be empty buffer strips of land 25 feet wide on the sides and 20 feet wide in the back. Find the overall dimensions of the parcel of land and building which will minimize the total area of the land parcel that the builder must purchase.

The function has a local minimum.

That is, (3/2, 7/4)

We have to given that,

Function is defined as,

⇒ f (x) = x² - 3x + 4

Now, The critical value of function is,

⇒ f (x) = x² - 3x + 4

⇒ f' (x) = 2x - 3

⇒ 2x - 3 = 0

⇒ x = 3/2

And,

⇒ f'' (x) = 2 > 0

Hence, It has a local minimum.

Which is,

c = 3/2

f (c) = f (3/2) = (3/2)² - 3(3/2) + 4

                  = 9/4 - 9/2 + 4

                  = - 9/4 + 4

                  = 7/4

That is, (3/2, 7/4)

Thus, The function has a local minimum.

That is, (3/2, 7/4)

Learn more about the function visit:

https://brainly.com/question/11624077

#SPJ1

a. ∫5x²√(2x²+1)dx = (1/2)∫√u du where u=2x²+1

b. ∫x².5(201²)dx = (2/7)∫u.5du where u=x³

a. To use the substitution method, we first choose a part of the integrand to substitute. Let u be equal to 2x²+1, so du = 4x dx. We can manipulate the integrand by factoring out 5x and substituting u and du.

∫5x²√(2x²+1)dx = 5∫x√(2x²+1)xdx = 5/4∫√u du (since 4x dx = du)

To evaluate the integral, we simplify the new integral involving u.

5/4∫√u du = 5/4 * (2/3)u^(3/2) + C

Substituting back for u,

5/4 * (2/3)(2x²+1)^(3/2) + C

b. Similarly, we choose a part of the integrand to substitute, so we let u = x³, so du = 3x² dx. Then we can manipulate the integral by factoring out x² and substituting u and du.

∫x².5(201²)dx = ∫x²(201²)√x dx = 201²∫u.5/2 du (since 3x² dx = du)

Again, we simplify the new integral by raising u to the power of 7/2 and multiplying by 2/7.

201²∫u.5/2 du = 2/7 * 201² * (2/7)u^(7/2) + C

Substituting back for u,

(4/49) * 201² * x^7/2 + C

Learn more about Substituting here.

https://brainly.com/questions/29383142

#SPJ11

To compute the exact value of each of the following definite integrals using the Fundamental Theorem of Calculus:

a) ∫[a to b] r dr

We can apply the Fundamental Theorem of Calculus to find the antiderivative of r with respect to r, which is (1/2)r². Evaluating this antiderivative from a to b gives the definite integral as [(1/2)b² - (1/2)a²].

b) ∫[a to b] ∫[−10π/180 to 53°] cos(θ) dθ

First, we integrate with respect to θ using the antiderivative of cos(θ), which is sin(θ). Then we evaluate the result from -10π/180 to 53°, converting the angle to radians. The definite integral becomes [sin(53°) - sin(-10π/180)].

c) ∫[c to d] ∫[√(−2cos(θ)) to (√3)] cos(θ) d(θ) dr

In this case, we have a double integral with respect to θ and r. We first integrate with respect to θ, treating r as a constant, using the antiderivative of cos(θ), which is sin(θ). Then we evaluate the result from √(-2cos(θ)) to √3. Finally, we integrate the resulting expression with respect to r from c to d. The exact value of this definite integral depends on the specific limits of integration and the values of c and d.

learn more about Fundamental Theorem of Calculus here:

https://brainly.com/question/30761130

#SPJ11

The function f(x) has intervals where f'(x) is greater than zero. The correct interval is (-∞, 2], which means all values less than or equal to 2.

To determine the interval where f'(x) is greater than zero, we need to find the values of x for which the derivative of f(x) is positive. The derivative of a function measures its rate of change at each point. In this case, we can see that the given function f(x) is not explicitly defined, but rather a sequence of numbers. We can interpret this sequence as a step function, where the value of f(x) changes abruptly at each integer value of x.

Since the step function changes its value at each integer, the derivative of f(x) will be zero at those points. The derivative will be positive when we move from a negative integer to a positive integer. Therefore, the interval where f'(x) is greater than zero is (-∞, 2]. This means that all values less than or equal to 2 will result in a positive derivative.

In conclusion, the correct answer is (-∞, 2]. Within this interval, f'(x) is greater than zero, indicating an increasing trend in the function.

learn more about function here:

https://brainly.com/question/31062578

#SPJ11

In 2 minutes, the approximate population of the bacteria will be 7020 organisms.

Since the bacteria's population is tripling every 10 minutes, we can first calculate the number of 10-minute intervals in 2 minutes, which is 0.2 (2 divided by 10).

Next, we can use the formula P = P0 x 3^(t/10), where P is the population after a certain amount of time, P0 is the starting population, t is the time elapsed in minutes, and 3 is the tripling factor. Plugging in the values, we get:

P = 1755 x 3^(0.2)

P ≈ 7020

Therefore, in 2 minutes, the approximate population of the bacteria will be 7020 organisms.

It's important to note that this is only an approximation since the growth rate is likely not exactly tripling every 10 minutes. Additionally, environmental factors may also affect the actual growth rate of the bacteria.

Learn more about tripling here.

https://brainly.com/questions/29547087

#SPJ11

To determine the number of shares, we need to solve a system of equations. The information provided includes the price decrease of both stocks and the total investment amount.

Let's assume x represents the number of shares of HES and y represents the number of shares of XOM bought. Based on the given information, we can set up the following equations:

Equation 1: 80x + 96y = 22,720 (total investment at the beginning)

Equation 2: 64x + 80y = 18,560 (selling price after 3 months)

To solve the system of equations, we can use various methods, such as substitution or elimination. Let's use the elimination method:

Multiplying Equation 1 by 0.8 and Equation 2 by 1.2 to eliminate the y term, we get:

Equation 3: 64x + 76.8y = 18,176

Equation 4: 64x + 80y = 18,560

Subtracting Equation 3 from Equation 4, we eliminate the x term:

3.2y = 384

y = 120

Substituting y = 120 into Equation 3 or 4, we find:

64x + 80(120) = 18,560

64x + 9600 = 18,560

64x = 8,960

x = 140

Therefore, the number of shares of HES bought is 140, and the number of shares of XOM bought is 120.

Learn more about system of equations here:

https://brainly.com/question/27905123

#SPJ11

The second derivative of g(x); g"(0) is equal to 0.

To find g"(0) for the function g(x) = 5x³(x² - 5x + 4), we need to calculate the second derivative of g(x) and then evaluate it at x = 0.

First, let's find the first derivative of g(x):

g'(x) = d/dx [5x³(x² - 5x + 4)].

Using the product rule, we can differentiate the function:

g'(x) = 5x³(2x - 5) + 3(5x²)(x² - 5x + 4)

     = 10x⁴ - 25x⁴ + 20x³ + 75x⁴ - 375x³ + 300x²

     = 60x⁴ - 375x³ + 300x².

Next, we differentiate g'(x) to find the second derivative:

g''(x) = d/dx [60x⁴ - 375x³ + 300x²]

      = 240x³ - 1125x² + 600x.

Now, let's evaluate g"(0) by substituting x = 0 into g''(x):

g"(0) = 240(0)³ - 1125(0)² + 600(0)

     = 0.

Therefore, g"(0) is equal to 0.

To know more about second derivative refer here:

https://brainly.com/question/29005833#

#SPJ11

Based on the information provided, the second-order differential equation is given as:

y'' - y' = 0

To find a solution of the second-order initial value problem (IVP), we need to determine the specific values of the parameters that satisfy the initial conditions.

The given initial conditions are:

y(-1) = 0

y'(-1) = -6

Let's start by finding the general solution to the differential equation. The characteristic equation is:

r^2 - r = 0

Factoring out an r:

r(r - 1) = 0

This gives us two possible roots: r = 0 and r = 1.

Therefore, the general solution is of the form:

y = c1 * e^0 + c2 * e^x

y = c1 + c2 * e^x

To find the specific solution that satisfies the initial conditions, we substitute the values of x and y into the general solution:

y(-1) = c1 + c2 * e^(-1) = 0          (equation 1)

y'(-1) = c2 * e^(-1) = -6              (equation 2)

From equation 2, we can solve for c2:

c2 = -6 * e

Substituting this value of c2 into equation 1:

c1 + (-6 * e) * e^(-1) = 0

c1 - 6 = 0

c1 = 6

Therefore, the specific solution to the IVP is:

y = 6 - 6e^x

This is the solution that satisfies the second-order differential equation y'' - y' = 0 with the given initial conditions y(-1) = 0 and y'(-1) = -6.

Visit here to learn more about differential equation:

brainly.com/question/25731911

#SPJ11

The formula for calculating a fixed-rate mortgage's monthly payment can be used to determine the monthly house payments required to amortise a loan:

[tex]P equals (P0 * r * (1 + r)n) / ((1 + r)n - 1),[/tex]

where P is the monthly installment, P0 is the loan's principal, r is the interest rate each month, and n is the total number of monthly installments.

In this instance, the loan's $141,900 principal balance, 8.4% yearly interest rate, and 30 years of repayment are all factors. The loan period must be changed to the total number of monthly payments, and the annual interest rate must be changed to a interest rate.

learn more about amortise here :

https://brainly.com/question/30973396

#SPJ11

x = π/4 + nπ, where n is an integer, is the solution for the equation tan(x) - 6tan(x) + 5 = 0 in the interval 0 < x < 21.

To solve the equation tan(x) - 6tan(x) + 5 = 0 in the interval 0 < x < 21, we can use the properties of trigonometric functions and algebraic manipulation.

Rearranging the equation, we have:

tan(x) - 6tan(x) + 5 = 0

-5tan(x) - 5 = 0

tan(x) = 1

The equation tan(x) = 1 indicates that x is an angle whose tangent is 1. Since the tangent function has a period of π, we can express the solution as x = arctan(1) + nπ, where n is an integer. The arctan(1) represents the principal value of the angle whose tangent is 1, which is π/4. Hence, the solution can be written as x = π/4 + nπ, where n is an integer.

Considering the given interval 0 < x < 21, we need to find the values of x that satisfy this condition. By substituting integer values for n, we can generate a series of angles within the given interval. For example, when n = 0, x = π/4 is within the interval. Similarly, for n = 1, x = π/4 + π = 5π/4 is also within the interval. This process can be continued to find other valid values of x.

In conclusion, the solution to the equation in the interval 0 < x < 21 is x = arctan(1) + nπ, where n is an integer. This represents a series of angles that satisfy the equation and fall within the specified interval.

Learn more about Arctan : brainly.com/question/1554041

#SPJ11

To find the limit of the expression (f(x+h)-f(x))/h as h approaches 0, where f(x) = x² - 2x + 7, we can directly substitute the given function into the expression and simplify to obtain the limit.

The given function is f(x) = x² - 2x + 7. We are interested in finding the limit of the expression (f(x+h)-f(x))/h as h approaches 0. Let's substitute the function into the expression:

lim(h->0) (f(x+h)-f(x))/h = lim(h->0) ((x+h)² - 2(x+h) + 7 - (x² - 2x + 7))/h

Simplifying further:

= lim(h->0) (x² + 2xh + h² - 2x - 2h + 7 - x² + 2x - 7)/h

= lim(h->0) (2xh + h² - 2h)/h

= lim(h->0) 2x + h - 2

Since h is approaching 0, the term h will disappear, and we are left with:

= 2x - 2

Therefore, the limit of the expression (f(x+h)-f(x))/h as h approaches 0 is 2x - 2.

Learn more about limit of the expression here:

https://brainly.com/question/25828595

#SPJ11

We find that the area of the surface obtained by rotating the curve y = 6x^3 from x = 0 to x = 6 about the X-axis is 7776π square units.

To explain the process in more detail, we start with the formula for the surface area of revolution. The differential element of surface area dA is given by dA = 2πy√(1+(dy/dx)^2) dx, where y represents the function defining the curve and dy/dx is its derivative.

In this case, the curve is defined by y = 6x^3, so we need to find dy/dx. Taking the derivative of y with respect to x, we obtain dy/dx = d/dx(6x^3) = 18x^2.

Now we can substitute y = 6x^3 and dy/dx = 18x^2 into the formula for dA. We have dA = 2π(6x^3)√(1+(18x^2)^2) dx.

To find the total surface area, we integrate dA with respect to x over the interval from x = 0 to x = 6. The integral becomes ∫(0 to 6) 2π(6x^3)√(1+(18x^2)^2) dx.

Evaluating this integral, we find that the area of the surface obtained by rotating the curve y = 6x^3 from x = 0 to x = 6 about the X-axis is 7776π square units.

To learn more about area click here, brainly.com/question/30307509

#SPJ11

The given ordinary differential equation is a linear homogeneous second-order equation with constant coefficients. The characteristic equation is solved to find the roots, which determine the general solution. To find the particular solution, a guess is made based on the form of the forcing term. The solutions are then combined to form the complete solution. In this case, the complete solution consists of the general solution and the particular solution.

To classify the given ODE, we look at its highest-order derivative term. Since it is a second-order derivative, the ODE is a second-order equation.

The characteristic equation is obtained by substituting y = e^(rx) into the homogeneous form of the equation (setting the forcing term equal to zero). For the given ODE, the characteristic equation becomes:

r^2 + 2r + 17 = 0

Solving this quadratic equation gives us the roots r1 = -1 + 4i and r2 = -1 - 4i.

The general solution to the homogeneous equation is then given by:

y_h(x) = c1e^((-1+4i)x) + c2e^((-1-4i)x)

To find the particular solution, a guess is made based on the form of the forcing term. Since the forcing term is 60e^(-4x)sin(5x), a particular solution of the form y_p(x) = Ae^(-4x)sin(5x) + Be^(-4x)cos(5x) is assumed.

By substituting this guess into the original ODE and solving for A and B, we can find the particular solution.

To ensure that we have found all the solutions, we combine the general solution and the particular solution. The general solution is a linear combination of two linearly independent solutions, and the particular solution is added to this to obtain the complete solution.

Therefore, the complete solution to the given ODE consists of the general solution and the particular solution.

Learn more about equation  here;

https://brainly.com/question/29174899

#SPJ11

The open interval on which f is concave up is (-∞, ∞), and the open interval on which f is concave down is "none". The inflection points occur at x = "none".

Given function f(x) = -x - 4x + 8x + 1 = 3x + 1Find the second derivative of f(x) with respect to x to determine where it is concave up and where it is concave down:

f′′(x) = f′(x) = 3

Since the second derivative is always positive, the function is concave up everywhere.

There are no inflection points in the function f(x) = 3x + 1, hence the answer is "none" for the last part.

Therefore, the open interval on which f is concave up is (-∞, ∞), and the open interval on which f is concave down is "none". The inflection points occur at x = "none".

Learn more about interval here:

https://brainly.com/question/11051767

#SPJ11

The Laplacian operator is represented as [tex]a^2 v^2 = V.V = a^2(a^2v/a^2x^2 + a^2v/a^2y^2 + a^2v/a^2z^2).[/tex]

To apply the Laplacian operator to the function h(x, y, z) = [tex]e^(2^2)[/tex] * sin(-7y), we need to find the second-order partial derivatives of the function with respect to each variable. Let's denote the partial derivatives as follows: [tex]∂^2h/∂x^2, ∂^2h/∂y^2, and ∂^2h/∂z^2.[/tex]

Taking the first partial derivative of h with respect to x, we get ∂h/∂x = 0, as there is no x term in the function. Thus, the second partial derivative [tex]∂^2h/∂x^2[/tex]is also 0.

For the y-component, [tex]∂h/∂y = -7e^(2^2) * cos(-7y)[/tex], and taking the second partial derivative ∂^2h/∂y^2, we have [tex]∂^2h/∂y^2 = 49e^(2^2) * sin(-7y).[/tex]

Since there is no z term in the function, ∂h/∂z = 0, and consequently, [tex]∂^2h/∂z^2 = 0.[/tex]

Therefore, applying the Laplacian operator to h(x, y, z) =[tex]e^(2^2) * sin(-7y) yields a^2v^2 = 0 + 49e^(2^2) * sin(-7y) + 0 = 49e^(2^2) * sin(-7y).[/tex]

Learn more about partial derivative here:

https://brainly.com/question/32387059

#SPJ11

The accumulated present value of Rochelle's position is approximately $314,611.07.

To find the accumulated present value of Rochelle's position, we can use the formula for continuous compound interest:

P = Pe^(kt),

where P is the accumulated present value, P0 is the initial value (salary), e is the base of the natural logarithm (approximately 2.71828), k is the interest rate, and t is the time period.

P0 = $95,000 (annual salary)

k = 0.04 (4% interest rate)

t = 65 - 35 = 30 years (time period)

Using the formula, we have:

P = $95,000 * e^(0.04 * 30).

Calculating this expression:

P = $95,000 * e^(1.2).

Using a calculator or software, we find:

P ≈ $95,000 * 3.320117.

P ≈ $314,611.07.

Therefore, the accumulated present value of Rochelle's position is approximately $314,611.07.

Learn more about future value at brainly.com/question/30787954

#SPJ11

Answer:

fill in the point into your equation and check it.

Step-by-step explanation:

You did a great job writing the equation. Now use the equation and the (x, y) in each part to find out which points are on the circle. For example, part A, (3,9) use x =3 and y = 9 in your equation

(3+3)^2 + (9-1)^2 = 100?



6^2 + 8^2 = 100

36 + 64 = 100

100 = 100 this checks so A(3,9) IS on the circle.

But for B(6,8), that is not on the circle bc it does not check:

(6+3)^2 + (8-1)^2 =100?



9^2 + 7^2 = 100

81 + 49 = 100

130 = 100 false. This does not check. (6,8) is not on the circle.

Be sure to check C, D, E

The truth table is attached in the image and the logic diagram is also attached.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

To implement the given function using AND, OR, and NOT logic gates, let's go through each step:

a. f has the value of 1 only if:

  i. a has the value 0 and b has the value 0.

  ii. a has the value 0 and b has the value 1.

We can create a truth table to represent the function:

The truth table is attached in thee image.

From the truth table, we can observe that f is equal to 1 when (a = 0 and b = 0) or (a = 0 and b = 1).

We can express this using logical operators as:

f = (a AND b') OR (a' AND b)

the logic diagram to implement this function is attached.

In the logic diagram, the inputs a and b are connected to the AND gate, and its complement (NOT) is connected to the other input of the AND gate.

The outputs of the AND gate are connected to the inputs of the OR gate. The output of the OR gate represents the output f.

This logic diagram represents the implementation of the boolean function f using AND, OR, and NOT logic gates based on the given conditions.

Hence, The truth table is attached in the image and the logic diagram is also attached.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ4

The probabilities are (a) The first two balls are red and the third is white, P(a) = 128/5832, (b) The probability of Two of the balls are red and one is white, P(b) = 384/5832.

To find the probability of events (a) and (b), we need to calculate the probability of each event separately and then add them up.

(a) The probability that the first two balls are red and the third ball is white:

The probability of drawing a red ball with replacement is 4/18, as there are 4 red balls out of 18 total balls.

Since we're drawing with replacement, the probability of drawing a red ball again is also 4/18.

The probability of drawing a white ball is 8/18.

To find the probability of these events occurring in sequence, we multiply their individual probabilities:

P(a) = (4/18) * (4/18) * (8/18)

(b) The probability that two balls are red and one is white:

There are three possible combinations for this event:

Red, Red, White

Red, White, Red

White, Red, Red

For each combination, we need to multiply the probabilities of drawing the respective colors:

P(b) = (4/18) * (4/18) * (8/18)   (combination 1)

+ (4/18) * (8/18) * (4/18)   (combination 2)

+ (8/18) * (4/18) * (4/18)   (combination 3)

Now, let's calculate these probabilities:

(a) P(a) = (4/18) * (4/18) * (8/18) = 128/5832

(b) P(b) = (4/18) * (4/18) * (8/18) + (4/18) * (8/18) * (4/18) + (8/18) * (4/18) * (4/18)

= 128/5832 + 128/5832 + 128/5832

= 384/5832

Therefore, the probabilities are (a) The first two balls are red and the third is white, P(a) = 128/5832, (b) The probability of Two of the balls are red and one is white, P(b) = 384/5832.

To know more about probability check the below link:

https://brainly.com/question/25839839

#SPJ4

The series 10 1 8 10.) Σ^=1 3 11.) Σ=2 12.) Σπ=1 32n+1 n5n-1 n(Inn) ³ √√n+8 7²-2 n²+1 n+cos n 13.) Σ=1 1 is divergent.

The given series contains a variety of terms and expressions, making it challenging to provide a simple and direct answer. Upon analysis, we can observe that the terms do not converge to a specific value or approach zero as the series progresses. This lack of convergence indicates that the series diverges.

In more detail, the presence of terms like n^5n-1 and √√n+8 in the series suggests exponential growth, which implies the terms become larger and larger as n increases. Additionally, the presence of n+cosn in the series introduces oscillation, preventing the terms from approaching a fixed value. These characteristics confirm the divergence of the series.

To determine the convergence or divergence of a series, it is important to examine the behavior of its terms and investigate if they approach a specific value or tend to infinity. In this case, the terms exhibit divergent behavior, leading to the conclusion that the given series is divergent.

In summary, the series 10 1 8 10.) Σ^=1 3 11.) Σ=2 12.) Σπ=1 32n+1 n5n-1 n(Inn) ³ √√n+8 7²-2 n²+1 n+cos n 13.) Σ=1 1 is divergent due to the lack of convergence in its terms.

To learn more about Convergence of a series, visit:

https://brainly.com/question/29853820

#SPJ11

The potential function for the vector field. F(x,y,z) = xy^2z^2i + x^2yz^2 j + x2^y^2z k is f(x,y,z) = x^2y^2z^2/2 + C. We need to determine if the vector field is conservative and also the potential function of the equation.

To determine whether a vector field is conservative, we need to check if it satisfies the condition of the Curl Theorem, which states that a vector field F = P i + Q j + R k is conservative if and only if the curl of F is zero:

curl(F) = (∂R/∂y - ∂Q/∂z) i + (∂P/∂z - ∂R/∂x) j + (∂Q/∂x - ∂P/∂y) k

If the curl is zero, then there exists a potential function f(x,y,z) such that F = ∇f. To find the potential function, we need to integrate each component of F with respect to its corresponding variable:

f(x,y,z) = ∫P dx + ∫Q dy + ∫R dz + C

where C is a constant of integration.

So let's compute the curl of the given vector field:

∂R/∂y = 2xyz, ∂Q/∂z = 2xyz, ∂P/∂z = 2xyz

∂R/∂x = 0, ∂P/∂y = 0, ∂Q/∂x = 0

Therefore,

curl(F) = 0i + 0j + 0k

Since the curl is zero, the vector field F is conservative.

To find the potential function, we need to integrate each component of F:

∫xy^2z^2 dx = x^2y^2z^2/2 + C1(y,z)

∫x^2yz^2 dy = x^2y^2z^2/2 + C2(x,z)

∫x^2y^2z dz = x^2y^2z^2/2 + C3(x,y)

where C1, C2, and C3 are constants of integration that depend on the variable that is not being integrated.

Now, we can choose any two of the three expressions for f(x,y,z) and eliminate the two constants of integration that appear in them. For example, from the first two expressions, we have:

x^2y^2z^2/2 + C1(y,z) = x^2y^2z^2/2 + C2(x,z)

Therefore, C1(y,z) = C2(x,z) - x^2y^2z^2/2. Similarly, from the first and third expressions, we have:

C1(y,z) = C3(x,y) - x^2y^2z^2/2.

Therefore, C3(x,y) = C1(y,z) + x^2y^2z^2/2. Substituting this into the expression for C1, we get:

C1(y,z) = C2(x,z) - x^2y^2z^2/2 = C1(y,z) + x^2y^2z^2/2 + x^2y^2z^2/2

Solving for C1, we get:

C1(y,z) = C2(x,z) = C3(x,y) = constant

So the potential function is:

f(x,y,z) = x^2y^2z^2/2 + C

where C is a constant of integration.

To know more about vector field refer here:

https://brainly.com/question/14122594#

#SPJ11

The net change in the amount of carbon-14 remaining in the sample between 500 years and 700 years after the shroud was created is approximately 20.93 grams.

To determine the net change in the amount of carbon-14 remaining in the sample between 500 years and 700 years after the shroud was created, we need to calculate the definite integral of the function that models the rate of change of carbon-14.

The function given is y(t) = t/5730, where t represents the time in years. This function represents the rate of change of the amount of carbon-14 remaining in the sample.

To find the net change, we integrate the function y(t) over the interval from 500 to 700:

Net change = ∫[500, 700] y(t) dt

Using the antiderivative of y(t) = t/5730, which is (1/2) * (t^2)/5730, we can evaluate the definite integral:

Net change = [(1/2) * (t^2)/5730] evaluated from 500 to 700

= (1/2) * [(700^2)/5730 - (500^2)/5730]

= (1/2) * [490000/5730 - 250000/5730]

= (1/2) * (240000/5730)

= 120000/5730

≈ 20.93 grams

Therefore, the net change in the amount of carbon-14 remaining in the sample between 500 years and 700 years after the shroud was created is approximately 20.93 grams.

To learn more about integral

https://brainly.com/question/22008756

#SPJ11

The radius of a cylinder is reduced by 4% and it's height is increased by 2% then then volume of cylinder will reduced by 2 percent.

Assume that,

Radius of cylinder = r

Height of cylinder = h

Then volume of cylinder = π r² h

Now according to the given information,

radius is reduced by 4 percent,

Then,

r' = r - 0.04r

  = 0.96r

Height of cylinder is increased by 2%

Then,

h' = h + 0.02h

   = 1.02h

Therefore,

New volume of cylinder = π(0.96r)² (1.02h)

                                        = 0.940 π r² h

Now change of volume in percentage

=  [(0.940 π r² h -  π r² h)/π r² h]x100

= -0.06x100

= -6%

Hence volume of cylinder will reduced by 2 percent.

To learn more about cylinder visit:

https://brainly.com/question/27803865

#SPJ1

The estimated possible error in computing the volume of the cube is 240 cm^3.

To estimate the possible error in computing the volume of the cube, we can use differentials. The volume of a cube is given by the formula V = s^3, where s is the length of the edge.

Let's calculate the differential of the volume, dV, using differentials:

dV = 3s^2 ds

Given that the length of the edge is 20 cm and the possible error in measurement is 0.2 cm, we have s = 20 cm and ds = 0.2 cm.

Substituting these values into the differential equation:

dV = 3(20 cm)^2 (0.2 cm)

Simplifying the equation:

dV = 3(400 cm^2)(0.2 cm)

= 240 cm^3

Therefore, 240 cm^3. is the estimated possible error in computing the volume of the cube.. However, none of the given choices (240 cm^3, 120 cm^3, 480 cm^3, 4800 cm^3) match the estimated error.

To learn more about error, refer below:

https://brainly.com/question/13089857

#SPJ11

The first three terms of the sequence are:

a₁ = 0,

a₂ = 0,

a₃ = -2.

To obtain the first three terms of the sequence, we substitute n = 1, n = 2, and n = 3 into the formula.

For n = 1:

a₁ = 5(1) - 1 - (1 + 1)²

= 5 - 1 - 2²

= 5 - 1 - 4

= 0

For n = 2:

a₂ = 5(2) - 1 - (2 + 1)²

= 10 - 1 - 3²

= 10 - 1 - 9

= 0

For n = 3:

a₃ = 5(3) - 1 - (3 + 1)²

= 15 - 1 - 4²

= 15 - 1 - 16

= -2

Therefore, the first three terms of the sequence are:

a₁ = 0,

a₂ = 0,

a₃ = -2.

Learn more about sequences here, https://brainly.com/question/7882626

#SPJ11

The value of B is approximately equal to 9.14 times the magnitude of E, in terms of A, D, and E.

To determine the value of B in terms of A, D, and E, let's analyze the given information and use the properties of a triangle.

Given:

C-5 = D = 8

∠C-D = 35°

∠A-D = 40°

|E| = 2|A|

Using the property of a triangle, the sum of the angles in a triangle is 180°. We can express the angle ∠B-D as:

∠B-D = 180° - (∠C-D + ∠A-D)

= 180° - (35° + 40°)

= 180° - 75°

= 105°

Now, let's use the Law of Sines to relate the magnitudes of the sides to the sines of their opposite angles. The Law of Sines states:

sin(A)/a = sin(B)/b = sin(C)/c

We can write the following ratios:

sin(∠A-D)/|A| = sin(∠B-D)/|B| = sin(∠C-D)/|D|

Substituting the given values:

sin(40°)/|A| = sin(105°)/|B| = sin(35°)/8

To find B in terms of A, D, and E, we need to eliminate |A| from the equation. We know that |E| = 2|A|, so |A| = |E|/2. Substituting this value into the equation:

sin(40°)/(|E|/2) = sin(105°)/|B| = sin(35°)/8

Rearranging the equation to solve for |B|:

|B| = (sin(105°)/sin(40°)) * (|E|/2)

= (8*sin(105°))/(sin(40°)) * (|E|/2)

= 8 * (sin(105°)/sin(40°)) * (|E|/2)

≈ 9.14 * |E|

Therefore, B is approximately equal to 9.14 times the magnitude of E, in terms of A, D, and E.

To know more about triangles, visit the link : https://brainly.com/question/1058720

#SPJ11

Partial fraction decomposition of [tex]x^6/(x^2-4) is {x^6}/{x^2-4}[/tex]=[tex]{A_1}/{x+2} + {A_2}/{x-2}[/tex] where [tex]A1 and A2[/tex] are constants and -2 and 2 are the roots of the denominator [tex]x^2 - 4.[/tex]

Partial fraction decomposition involves breaking a fraction down into simpler fractions. These simpler fractions consist of terms with denominators that are factors of the original denominator. It is often used in calculus when integrating rational functions.

The form of partial fraction decomposition is as follows:

[tex]{P(x)}/{Q(x)}[/tex]= [tex]{A_1}/{x-x_1} +{A_2}/{x-x_2} + {A_3}/{x-x_3} + ... + {A_n}/{x-x_n}[/tex]where [tex]A1, A2, A3, ..., An[/tex] are constants, and[tex]x1, x2, x3, ..., xn[/tex] are the roots of the polynomial [tex]Q(x)[/tex].

Now let's apply this form to the given function, [tex]x^6/(x^2-4)[/tex]: [tex]{x^6}/{x^2-4} ={A_1}/{x+2} + {A_2}/{x-2}[/tex]where A1 and A2 are constants and -2 and 2 are the roots of the denominator[tex]x^2 - 4.[/tex]

This is the partial fraction decomposition of[tex]x^6/(x^2-4).[/tex]

Note that we have not determined the numerical values of the coefficients A1 and A2.

For more such questions on Partial fraction decomposition, click on:

https://brainly.com/question/24594390

#SPJ8

The equation of the tangent line to the curve f(x) = √(6x+4) at x = 2 is y = 2x - 2.

To find the equation of the tangent line, we first need to find the derivative of the function f(x). Taking the derivative of √(6x+4) with respect to x, we get f'(x) = 1/(2√(6x+4)) * 6 = 3/(√(6x+4)).

Next, we substitute x = 2 into the derivative to find the slope of the tangent line at x = 2. Plugging x = 2 into f'(x), we have f'(2) = 3/(√(6*2+4)) = 3/4.

Now, we have the slope of the tangent line, which is 3/4. Using the point-slope form of a line y - y₁ = m(x - x₁) and substituting the point (2, f(2)) = (2, √(6*2+4)) = (2, 4), we have y - 4 = (3/4)(x - 2).

Finally, we can rearrange the equation to standard form by multiplying both sides by 4 to eliminate the fraction: 4y - 16 = 3x - 6. Simplifying, we get the equation of the tangent line in standard form as 3x - 4y + 10 = 0.

Learn more about equation of the tangent line:

https://brainly.com/question/6617153

#SPJ11

The answer provides the calculations for vector operations using the given vectors a and b. It determines the values of a + b, 4a + 2b, ||a||, and ||a - b||, simplifying the vectors completely.

Given the vectors a = 5i + j and b = 1 - 4j, we can perform the vector operations as follows:

a + b:

To find the sum of vectors a and b, we add their corresponding components:

a + b = (5i + j) + (1 - 4j) = 5i + j + 1 - 4j = 6i - 3j.

4a + 2b:

To find the scalar multiple of vectors 4a and 2b, we multiply each component by the scalar:

4a + 2b = 4(5i + j) + 2(1 - 4j) = 20i + 4j + 2 - 8j = 20i - 4j + 2.

||a||:

To find the magnitude of vector a, we calculate the square root of the sum of the squares of its components:

||a|| = √((5)^2 + (1)^2) = √(25 + 1) = √26.

||a - b||:

To find the magnitude of the difference between vectors a and b, we subtract their corresponding components and calculate the magnitude:

||a - b|| = √((5 - 1)^2 + (1 - (-4))^2) = √(16 + 25) = √41.

In conclusion, the calculations for the given vector operations are: a + b = 6i - 3j, 4a + 2b = 20i - 4j + 2, ||a|| = √26, and ||a - b|| = √41.

Learn more about vector here:

https://brainly.com/question/30958460

#SPJ11

Answer:

904.78 cubic meters.

Step-by-step explanation:

V = (4/3)πr³

Where V represents the volume and r is the radius.

Plugging in the given value, we have:

V = (4/3)π(6³)

V = (4/3)π(216)

V = (4/3)(3.14159)(216)

V ≈ 904.778683 m³

Therefore, the volume of the sphere with a radius of 6 m is approximately 904.78 cubic meters.