A firm manufactures a commodity at two different factories, Factory X and Factory Y. The total cost (in dollars) of manufacturing depends on the quantities, and y produced at each factory, respectively, and is expressed by the joint cost function: C(x, y) = = 1x² + xy + 2y² + 600 A) If the company's objective is to produce 400 units per month while minimizing the total monthly cost of production, how many units should be produced at each factory? (Round your answer to whole units, i.e. no decimal places.) To minimize costs, the company should produce: at Factory X and at Factory Y dollars. (Do not B) For this combination of units, their minimal costs will be enter any commas in your answer.)

The integral ∫[0,1]∫[1,2] x^2 f(x, y) dy dx can be interpreted as the double integral over the region defined by the limits of integration: x ranging from 0 to 1 and y ranging from 1 to 2. To sketch this region, we can visualize a rectangular region in the xy-plane bounded by the lines x = 0, x = 1, y = 1, and y = 2.

Now, to change the order of integration, we need to swap the order of the integrals. Instead of integrating with respect to y first and then x, we will integrate with respect to x first and then y.

The new order of integration will be ∫[1,2]∫[0,1] x^2 f(x, y) dx dy. This means that we will integrate with respect to x over the interval [0,1], and for each value of x, we will integrate with respect to y over the interval [1,2].

Changing the order of integration can sometimes make the evaluation of the integral more convenient or allow us to use different techniques to solve it.

Learn more about integration

https://brainly.com/question/31954835

#SPJ11

False, the graph of y = sin(x) is not increasing on the entire interval. The meaning of y = cosine(λx) is explained in the second paragraph.

False: The graph of y = sin(x) is not increasing on the entire interval because the sine function oscillates between -1 and 1 as x varies. It has both increasing and decreasing segments within each period. However, it is increasing on certain intervals, such as [0, π/2], where the values of sin(x) go from 0 to 1.

The expression y = cos(λx) represents a cosine function with a period of 2π/λ. The parameter λ determines the frequency or number of cycles within the interval of 2π. When λ is greater than 1, the function will have more cycles within 2π, and when λ is less than 1, the function will have fewer cycles. The cosine function has an amplitude of 1 and oscillates between -1 and 1.


To learn more about cosine function click here: brainly.com/question/3876065

#SPJ11

We need to compute the number of permutations of {1, 2, 3, 4, 5, 6, 7, 8, 9} in which either 2, 3, 4 are consecutive or 4, 5 are consecutive or 8, 9, 2 are consecutive. To do this, we will count the number of favorable permutations for each case and then subtract the overlapping cases to obtain the final count.

Let's calculate the number of permutations for each case separately:

Case 1: 2, 3, 4 are consecutive: We treat {2, 3, 4} as a single element. So, we have 7 elements to arrange, which can be done in 7! = 5040 ways.

Case 2: 4, 5 are consecutive: Similar to Case 1, we treat {4, 5} as a single element. We have 8 elements to arrange, resulting in 8! = 40,320 ways.

Case 3: 8, 9, 2 are consecutive: Again, we treat {8, 9, 2} as a single element. We have 7 elements to arrange, giving us 7! = 5040 ways.

However, we have counted some overlapping cases. Specifically, the permutations in which both Case 1 and Case 2 occur simultaneously and the permutations in which both Case 2 and Case 3 occur simultaneously.

To calculate the overlapping cases, we consider {2, 3, 4, 5} as a single element. We have 6 elements to arrange, resulting in 6! = 720 ways.

To obtain the final count, we subtract the overlapping cases from the total count:

Total count = (Count for Case 1) + (Count for Case 2) + (Count for Case 3) - (Overlapping cases)

= 5040 + 40,320 + 5040 - 720

= 46,680

Therefore, the number of permutations satisfying the given conditions is 46,680.

Learn more about permutations here:

https://brainly.com/question/29990226

#SPJ11

Activity 1: Obtain the differential equation of y = At^x, where A is a constant. To find the differential equation, we need to differentiate y with respect to t. Assuming A is a constant and x is a function of t, we can use the chain rule to differentiate y = At^x.

dy/dt = d(A[tex]t^x[/tex])/dt

Applying the chain rule, we have:

dy/dt = d(A[tex]t^x[/tex])/dx * dx/dt

Since x is a function of t, dx/dt represents the derivative of x with respect to t. To find dx/dt, we need more information about the function x(t).

Without further information about the relationship between x and t, we cannot determine the exact differential equation. The form of the differential equation will depend on the specific relationship between x and t.

Activity 3: Prove that y = [tex]4e^{(Ax + B)[/tex], where A and B are constants, is a solution of the differential equation y'' - 25y = 0. To prove that y = [tex]e^{(Ax + B)[/tex] is a solution of the given differential equation, we need to substitute y into the differential equation and verify that it satisfies the equation. First, let's calculate the first and second derivatives of y with respect to x:

dy/dx =[tex]4Ae^{(Ax + B)[/tex]

[tex]d^2y/dx^2 = 4A^2e^{(Ax + B)[/tex]

Now, substitute y, dy/dx, and [tex]d^2y/dx^2[/tex] into the differential equation:

[tex]d^2y/dx^2 - 25y = 4A^{2e}^{(Ax + B)} - 25(4e^{(Ax + B)})[/tex]

Simplifying the expression, we have:

[tex]4A^2e^(Ax + B) - 100e^{(Ax + B)[/tex]

Factoring out the common term [tex]e^{(Ax + B)[/tex], we get:

[tex](4A^2 - 100)e^{(Ax + B)[/tex]

For the equation to be satisfied, the expression inside the parentheses must be equal to zero:

[tex]4A^2 - 100 = 0[/tex]

Solving this equation, we find that A = ±5.

Therefore, for A = ±5, the function [tex]y = 4e^{(Ax + B)[/tex] is a solution of the differential equation y'' - 25y = 0.

learn more about differential equation here:

https://brainly.com/question/32538700

#SPJ11

The critical values for the test statistic T₀ are as follows:(a) For α = 0.01 and n = 20, T₀ ≥ 2.861 (b) For α = 0.05 and n = 12, T₀ ≥ 1.796 (c) For α = 0.10 and n = 15, T₀ ≥ 1.345

We want to determine the appropriate value from the t-conveyance in light of the importance level () and opportunity levels (df) associated with the example size (n) in order to determine the fundamental incentive for the test measurement T0.

df = n - 1 is the probability of testing a population mean with unclear variation.

(a) α = 0.01 and n = 20:

For α = 0.01 and n = 20, the degrees of chance (df) would be 20 - 1 = 19. We need to find the fundamental worth from the t-dissemination for a one-followed test with a significance level of 0.01 and 19 degrees of chance. Let's refer to this fundamental worth as t1.

Using a t-table or factual programming, we discover that, for df = 19 and t1 = 0.01, the approximate value is 2.861.

(b) α = 0.05 and n = 12:

The levels of opportunity (df) would be 12 - 1 = 11 for n = 12 and  = 0.05. For a one-followed test with 11 levels of opportunity and an importance level of 0.05, we want to determine the basic worth from the t-conveyance. Could we mean this essential worth as t₁₋α.

Using a t-table or factual programming, we discover that, for df = 11 and t1 = 0.05, the approximate value is 1.796.

(c) α = 0.10 and n = 15:

For α = 0.10 and n = 15, the degrees of chance (df) would be 15 - 1 = 14. We need to find the essential worth from the t-dispersal for a one-followed test with a significance level of 0.10 and 14 degrees of chance. We ought to refer to this fundamental worth as t1.

Using a t-table or real programming, we find that t₁₋α for α = 0.10 and df = 14 is generally 1.345.

As a result, the fundamental characteristics of the test measurement T0 are as follows:

(a) For α = 0.01 and n = 20, T₀ ≥ 2.861

(b) For α = 0.05 and n = 12, T₀ ≥ 1.796

(c) For α = 0.10 and n = 15, T₀ ≥ 1.345

To know more about probability refer to

https://brainly.com/question/32117953

#SPJ11

The correct relation which is the inverse of relation is,

⇒ y → x

We have to given that,

Relation is defined as,

⇒ x → y

Since we know that,

An inverse relation is, as the name implies, the inverse of a relationship. Let us review what a relation is. A relation is a set of ordered pairs. Consider the two sets A and B.

The set of all ordered pairings of the type (x, y) where x A and y B are represented by A x B is then termed the cartesian product of A and B. A relation is any subset of the cartesian product A x B.

Now, We can write the inverse of relation is,

⇒ x → y

⇒ y → x

Thus, The correct relation which is the inverse of relation is,

⇒ y → x

To learn more about relation visit:

https://brainly.com/question/31111483

#SPJ1

The power series Σn-o(x - 1)" represents a geometric series centered at x = 1. Let's determine the function represented by this power series and the interval of convergence.

The general form of a geometric series is Σar^n, where a is the first term and r is the common ratio. In this case, the first term is n-o(1 - 1)" = 0, and the common ratio is (x - 1)".

Therefore, the power series Σn-o(x - 1)" represents the function f(x) = 0 for all x in the interval of convergence. The interval of convergence of this series is the set of all x-values for which the series converges.

Since the common ratio (x - 1)" is raised to the power n, the series will converge if |x - 1| < 1. In other words, the interval of convergence is (-1, 1).

To know more about interval of convergence refer here:

https://brainly.com/question/31972874#

#SPJ11

The probability that the gambler will win the bet is very low at only 0.83%.

The probability that the gambler will win the bet, we need to first determine the total number of possible outcomes or permutations for the top three finishers out of the six horses. This can be calculated using the formula for permutations:

P(6, 3) = 6! / (6-3)! = 6 x 5 x 4 = 120
This means that there are 120 possible ways that the top three finishers can be chosen out of the six horses. However, the gambler needs to pick the top three finishers in the correct order to win the bet. Therefore, there is only one correct outcome that will result in the gambler winning the bet.

The probability of the correct outcome happening is therefore:

1/120 = 0.0083 or approximately 0.83%

So, the probability that the gambler will win the bet is very low at only 0.83%.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

To find the value of y₁(2), we can use the given differential equation and the initial condition y(1) = 4.  The differential equation is dy/dx = (2y - 5x² + 3) / x. We want to find the particular solution y₁(x) that satisfies this equation. First, we integrate both sides of the equation:

∫dy = ∫(2y - 5x² + 3) / x dx

This gives us y = 2yln|x| - (5/3)x³ + 3x + C, where C is the constant of integration. Next, we substitute the initial condition y(1) = 4 into the equation:

4 = 2(4)ln|1| - (5/3)(1)³ + 3(1) + C

4 = 8ln(1) - 5/3 + 3 + C

4 = 0 + 2/3 + 3 + C

C = 4 - 2/3 - 3

C = 11/3

So the particular solution y₁(x) is given by:

y₁(x) = 2yln|x| - (5/3)x³ + 3x + 11/3

To find y₁(2), we substitute x = 2 into the equation:

y₁(2) = 2y₁ln|2| - (5/3)(2)³ + 3(2) + 11/3

y₁(2) = 2y₁ln(2) - 40/3 + 6 + 11/3

y₁(2) = 2y₁ln(2) - 23/3

Therefore, the value of y₁(2) is 2y₁ln(2) - 23/3.

Learn more about equation here: brainly.com/question/31047012

#SPJ11

The equation of the tangent line to the graph of y = f(x) at the point (2, 6) is y = 8x - 10.

To compute the derivative of the function f(x) using the limit definition, we can start by finding the difference quotient:

f'(x) = lim(h -> 0) [f(x + h) - f(x)] / h

Let's substitute the given function f(x) = x² + 4x - 3 into the difference quotient:

f'(x) = lim(h -> 0) [(x + h)² + 4(x + h) - 3 - (x^2 + 4x - 3)] / h

Simplifying the expression inside the limit:

f'(x) = lim(h -> 0) [x² + 2hx + h² + 4x + 4h - 3 - x² - 4x + 3] / h

Combining like terms:

f'(x) = lim(h -> 0) (2hx + h² + 4h) / h

Canceling out the common factor of h:

f'(x) = lim(h -> 0) (2x + h + 4)

Now we can evaluate the limit as h approaches 0:

f'(x) = 2x + 4

To find the  at x = 2, substitute x = 2 into the derivative expression:

f'(2) = 2(2) + 4

= 4 + 4

= 8

Therefore, f'(2) = 8.

To find the equation of the tangent line to the graph of y = f(x) at the point (2, 6), we can use the point-slope form of a line:

y - y1 = m(x - x1)

where (x1, y1) is the given point (2, 6) and m is the slope, which is the derivative at that point.

Substituting the values:

y - 6 = 8(x - 2)

Simplifying:

y - 6 = 8x - 16

Moving the constant term to the other side:

y = 8x - 10

Therefore, the equation of the tangent line to the graph of y = f(x) at the point (2, 6) is y = 8x - 10.

To know more about derivative check the below link:

https://brainly.com/question/28376218

#SPJ4

The cube root of z can be evaluated by taking the cube root of the magnitude and dividing the angle by 3.

To evaluate the cube root of z = 8 cis(150°), we first find the magnitude of z, which is 8. Taking the cube root of 8 gives us 2.Next, we divide the angle by 3 to find the principal argument. In this case, 150° divided by 3 is 50°. So, the principal argument is 50°.

Since the cube root of a complex number has three possible values, we can add multiples of 360°/3 to the principal argument to find the other two values. In this case, adding 360°/3 gives us 170° and 290°. Therefore, the cube root of z has three values: 2 cis(50°), 2 cis(170°), and 2 cis(290°).

Learn more about Theta : brainly.com/question/21807202

#SPJ11

To find the inverse Laplace transform of Y(s) = a/(s^2 + a^2)(s^2 + 9), we can use partial fraction decomposition.

Given that y" + 9y = sin(at), y(0) = 0 and y'(0) = 0.We need to find the Laplace transform of the given differential equation.To find the Laplace transform of the given differential equation, apply the Laplace transform to both sides of the equation.L{y" + 9y} = L{sin(at)}s^2 Y(s) - s y(0) - y'(0) + 9 Y(s) = a/(s^2 + a^2)Since y(0) = y'(0) = 0, we get s^2 Y(s) + 9 Y(s) = a/(s^2 + a^2)On solving, we get Y(s) = a/(s^2 + a^2)(s^2 + 9)Taking the inverse Laplace transform of Y(s) will give the solution of the differential equation, y(t).

learn more about more Laplace here;

https://brainly.com/question/31486586?

#SPJ11

S = ∫[1,4] 2π(yx)√(1+(x+y)^2) dx. This integral represents the surface area of the solid obtained by rotating the curve about the y-axis on the interval 1 < y < 4.By evaluating this integral, we can find the exact area of the surface.

To calculate the surface area, we need to express the given curve y = yx in terms of x. Dividing both sides by y, we get x = y/x.

Next, we need to find the derivative dy/dx of the curve y = yx. Taking the derivative, we obtain dy/dx = x + y(dx/dx) = x + y.

Now, we can apply the formula for the surface area of a solid of revolution:

S = ∫[a,b] 2πy√(1+(dy/dx)^2) dx.

Substituting the expression for y and dy/dx into the formula, we get:

S = ∫[1,4] 2π(yx)√(1+(x+y)^2) dx.

This integral represents the surface area of the solid obtained by rotating the curve about the y-axis on the interval 1 < y < 4.

By evaluating this integral, we can find the exact area of the surface.

To learn more about integral  click here, brainly.com/question/31059545

#SPJ11

Therefore, the possible lengths of the third side (x) range from 10 to 19 inches.

The sum of the three lengths of a fence can be written as:

9 + 12 + x

The given range for the sum is from 31 to 40 inches, so we can write the compound inequality as:

31 ≤ 9 + 12 + x ≤ 40

Simplifying, we have:

31 ≤ 21 + x ≤ 40

Subtracting 21 from all sides, we get:

10 ≤ x ≤ 19

To know more about possible lengths,

https://brainly.com/question/28776725

#SPJ11

To find the equation of the tangent line to the curve at the point x = 2, we need to find the slope of the curve at that point and use the point-slope form of a line.

To find the slope of the curve at x = 2, we can take the derivative of the original function with respect to x. Once we have the derivative, we evaluate it at x = 2 to find the slope of the tangent line.

After finding the slope, we use the point-slope form of a line, which is y - y1 = m(x - x1), where (x1, y1) is the given point (x = 2) on the curve and m is the slope of the tangent line. Substitute the values of x1, y1, and m into the equation to obtain the equation of the tangent line.

It's important to note that the original function should be provided in order to accurately calculate the slope and determine the equation of the tangent line.

To learn more about Derivative

brainly.com/question/25752367

#SPJ11

To evaluate the double integral of f(x, y) over the domain D, we integrate f(x, y) with respect to x and y over their respective ranges in D.

The given domain D is defined as:

D = {(x, y) | 0 ≤ y < 1, 0 < x < y}

To set up the double integral, we write:

∬D f(x, y) dA

where dA represents the infinitesimal area element in the xy-plane.

Since the domain D is defined as 0 ≤ y < 1 and 0 < x < y, we can rewrite the limits of integration as:

∬D f(x, y) dA = ∫[0, 1] ∫[0, y] f(x, y) dxdy

Now, substituting the given function f(x, y) = e[tex]^(xy)[/tex]into the double integral, we have:

∫[0, 1] ∫[0, y] e[tex]^{(xy)}[/tex] dxdy

To evaluate this integral, we first integrate with respect to x:

∫[0, y] [tex]e^{(xy)[/tex] dx =[tex][e^(xy)/y][/tex] evaluated from x = 0 to x = y

This simplifies to:

∫[tex][0, y] e^{(xy) }dx = (e^{(y^{2}) }- 1)/y[/tex]

Now, we integrate this expression with respect to y:

∫[tex][0, 1] (e^{(y^2) - 1)/y dy[/tex]

This integral may not have a closed-form solution and may require numerical methods to evaluate.

In summary, the double integral of f(x, y) = [tex]e^(xy)[/tex] over the domain D = {(x, y) | 0 ≤ y < 1, 0 < x < y} is:

∫[0, 1] ∫[0, y] e^(xy) dxdy = ∫[0, 1] (e^(y^2) - 1)/y dy

learn more about double integral here:

https://brainly.com/question/27360126

#SPJ11

Given the solid tetrahedron, T with vertices (0,0,0), (2,0,0), (0,1,0), and (0,0,-1). Therefore, the coordinates of the centroid of the given tetrahedron are (1/3, 1/6, -1/3).

We need to find the coordinates of the centroid of this tetrahedron. A solid tetrahedron is a four-faced polyhedron with triangular faces that converge at a single point. The centroid of a solid tetrahedron is given by the intersection of its medians.

We can find the coordinates of the centroid of the given tetrahedron using the following steps:

Step 1: Find the midpoint of edge JD, which joins the points (0,0,0) and (2,0,0).The midpoint of JD is given by: midpoint of JD = (0+2)/2, (0+0)/2, (0+0)/2= (1, 0, 0)

Step 2: Find the midpoint of edge x y, which joins the points (0,1,0) and (0,0,-1).The midpoint of x y is given by: midpoint of x y = (0+0)/2, (1+0)/2, (0+(-1))/2= (0, 1/2, -1/2)

Step 3: Find the midpoint of edge V, which joins the points (0,0,0) and (0,0,-1).

The midpoint of V is given by: midpoint of V = (0+0)/2, (0+0)/2, (0+(-1))/2= (0, 0, -1/2)Step 4: Find the centroid, C of the tetrahedron by finding the average of the midpoints of the edges.

The coordinates of the centroid of the tetrahedron is given by: C = (midpoint of JD + midpoint of x y + midpoint of V)/3C = (1, 0, 0) + (0, 1/2, -1/2) + (0, 0, -1/2)/3C = (1/3, 1/6, -1/3)

To know more about tetrahedron

https://brainly.com/question/4681700

#SPJ11

In both cases, the probability of obtaining anywhere from 70 to 80 heads when flipping a fair coin 100 times is calculated.

a. Using the Binomial distribution, the probability can be computed by summing the probabilities of obtaining 70, 71, 72, ..., up to 80 heads. Each individual probability is calculated using the binomial probability formula. The result will provide the exact probability of obtaining this range of heads.

b. Assuming the coin flips are normally distributed, the probability can be calculated using the normal distribution. The mean of the distribution is equal to the number of trials (100) multiplied by the success probability (0.5 for a fair coin). The standard deviation is calculated as the square root of the product of the success probability (0.5) and its complement (0.5). By finding the cumulative probability between 70 and 80 using the normal distribution, the probability of seeing a result within this range can be obtained.

The probability calculated using the Binomial distribution (a) will provide an exact value, while the normal distribution approximation (b) will provide an estimated probability. Typically, for large sample sizes like 100 coin flips, the normal approximation tends to be very close to the actual probability calculated using the Binomial distribution. However, the approximation may not be as accurate for smaller sample sizes or when dealing with extreme probabilities.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

a) The partial derivative of f with respect to x, fa, is given by fa = y cos x - em sin y.

b) The partial derivative of f with respect to y, fy, is given by fy = sin x + em sin y.

c) The partial derivative of f with respect to r, fra, where r represents the radial distance, is 0.

d) The partial derivative of f with respect to u, fu, where u represents the polar angle, is 0.

e) The mixed partial derivative of f with respect to x and y, fxy, is given by fxy = cos x + em cos y.

a) To find the partial derivative of f with respect to x, fa, we differentiate the terms of f with respect to x while treating y as a constant. The derivative of y sin x with respect to x is y cos x, and the derivative of em cos y with respect to x is 0. Therefore, fa = y cos x - em sin y.

b) To find the partial derivative of f with respect to y, fy, we differentiate the terms of f with respect to y while treating x as a constant. The derivative of y sin x with respect to y is sin x, and the derivative of em cos y with respect to y is em sin y. Therefore, fy = sin x + em sin y.

c) To find the partial derivative of f with respect to r, fra, we need to consider that f is a function of x and y, and not explicitly of r. As a result, the derivative with respect to r is 0.

d) To find the partial derivative of f with respect to u, fu, we need to consider that f is a function of x and y, and not explicitly of u. Therefore, the derivative with respect to u is also 0.

e) To find the mixed partial derivative of f with respect to x and y, fxy, we differentiate fy with respect to x. The derivative of sin x with respect to x is cos x, and the derivative of em cos y with respect to x is 0. Therefore, fxy = cos x + em cos y.

To leran more about partial derivative, refer:-

https://brainly.com/question/28751547

#SPJ11

Question: The critical points of the function w=w+6wv+3v--9u+2 are...

(A). (3, 1) and (-1,-3).

(B). (43, 3) and (1,-1).

(C). (-3, -1) and (1,3).
(D). None

The critical points of the function w=w+6wv+3v--9u+2 are the points where the partial derivatives with respect to u and v are both equal to zero.

Taking the partial derivative with respect to u, we get 6w-9=0, which gives us w=1.5.

Taking the partial derivative with respect to v, we get 6w+3=0, which gives us w=-0.5.

Therefore, there are no critical points for this function since the values of w obtained from the partial derivatives are not equal. Hence, option (D)

The question was: "The critical points of the function w=w+6wv+3v--9u+2 are...

(A). (3, 1) and (-1,-3).

(B). (43, 3) and (1,-1).

(C). (-3, -1) and (1,3).
(D). None"

Learn more about partial derivative: https://brainly.com/question/31399205

#SPJ11

The function [tex]s(x) = -x^2 - 12x - 27[/tex]has a relative maximum at (-6, 9) and a relative minimum at (12, -27).

To find the relative extrema of the function, we can use calculus. The first step is to take the derivative of the function s(x) with respect to x, which gives us s'(x) = -2x - 12. To find the critical points where the derivative is zero or undefined, we set s'(x) = 0 and solve for x. In this case, -2x - 12 = 0, which gives us x = -6.

Next, we can evaluate the function s(x) at the critical point x = -6 and the endpoints of the given interval. When we substitute x = -6 into s(x), we get s[tex](-6) = -6^2 - 12(-6) - 27 = 9.[/tex] This gives us the coordinates of the relative maximum (-6, 9).

Finally, we evaluate s(x) at the other critical point and endpoints. Substituting x = 12 into s(x), we get[tex]s(12) = -12^2 - 12(12) - 27 = -27[/tex]. This gives us the coordinates of the relative minimum (12, -27). Therefore, the function [tex]s(x) = -x^2 - 12x - 27[/tex]has a relative maximum at (-6, 9) and a relative minimum at (12, -27).

learn more about relative extreama here

brainly.com/question/32562793

#SPJ11

Summary:

The mean of the discrete uniform random variable x, defined on the consecutive integers 10, 11, ..., 20, is 15.

Explanation:

To calculate the mean of a discrete uniform random variable, we add up all the possible values and divide by the total number of values.

In this case, the random variable x takes on the values 10, 11, 12, ..., 20. To find the mean, we add up all these values and divide by the total number of values, which is 20 - 10 + 1 = 11.

Sum of values = 10 + 11 + 12 + ... + 20

= (10 + 20) + (11 + 19) + (12 + 18) + ... + (15 + 15)

= 11 * 15

Mean = Sum of values / Total number of values

= (11 * 15) / 11

= 15

Therefore, the mean of the discrete uniform random variable x, defined on the consecutive integers 10, 11, ..., 20, is 15

Learn more about discrete uniform random variable here:

https://brainly.com/question/32113546

#SPJ11

The work done is 2800 ft-lb if a cable that weighs 4 lb/ft is used to lift 800 lb of coal up a mine shaft 700 ft deep.

To calculate the work done, we can use the formula

W = ∫(f(x) × dx)

where f(x) represents the weight of the cable per unit length and dx represents an infinitesimally small length of the cable.

In this case, the weight of the cable is 4 lb/ft, and the length of the cable is 700 ft. So we have

W = ∫(4 × dx) from x = 0 to x = 700

Integrating with respect to x, we get

W = 4x | from x = 0 to x = 700

Substituting the limits of integration

W = 4(700) - 4(0)

W = 2800 lb-ft

To know more about work done here

https://brainly.com/question/32263955

#SPJ4

The given system of differential equations is 4x' - 2y' = 24 and 2x' + y' = 2, with initial conditions x(0) = 3 and y(0) = 3. The solution to the system is an ellipse with a clockwise orientation trajectory.

To solve the system, we can use various methods such as substitution, elimination, or matrix notation. Let's use the matrix notation method. Rewriting the system in matrix form, we have:

| 4 -2 | | x' | | 24 |

| 2 1 | | y' | = | 2 |

Using the inverse of the coefficient matrix, we have:

| x' | | 1 2 | | 24 |

| y' | = | -2 4 | | 2 |

Multiplying the inverse matrix by the constant matrix, we obtain:

| x' | | 10 |

| y' | = | 14 |

Integrating both sides with respect to t, we have:

x = 10t + C1

y = 14t + C2

Applying the initial conditions x(0) = 3 and y(0) = 3, we find C1 = 3 and C2 = 3. Therefore, the solution to the system is:

x = 10t + 3

y = 14t + 3

The trajectory of the solution is described by the parametric equations for x and y, which represent an ellipse. The clockwise orientation of the trajectory is determined by the positive coefficients 10 and 14 in the equations.

To learn more about differential equations: -brainly.com/question/25731911#SPJ11

The four second partial derivatives of the function f(x, y) = y∙sin(ωx) are:

∂²f/∂x² = -y∙ω²∙sin(ωx),

∂²f/∂y² = 0,

∂²f/∂x∂y = ω∙cos(ωx),

∂²f/∂y∂x = ω∙cos(ωx).

To find the four second partial derivatives of the function f(x, y) = y∙sin(ωx), we need to differentiate the function with respect to x and y multiple times.

Let's start by computing the first-order partial derivatives:

∂f/∂x = y∙ω∙cos(ωx)   ... (1)

∂f/∂y = sin(ωx)   ... (2)

To find the second-order partial derivatives, we differentiate the first-order partial derivatives with respect to x and y:

∂²f/∂x² = ∂/∂x (∂f/∂x) = ∂/∂x (y∙ω∙cos(ωx)) = -y∙ω²∙sin(ωx)   ... (3)

∂²f/∂y² = ∂/∂y (∂f/∂y) = ∂/∂y (sin(ωx)) = 0   ... (4)

Next, we compute the mixed partial derivatives:

∂²f/∂x∂y = ∂/∂y (∂f/∂x) = ∂/∂y (y∙ω∙cos(ωx)) = ω∙cos(ωx)   ... (5)

∂²f/∂y∂x = ∂/∂x (∂f/∂y) = ∂/∂x (sin(ωx)) = ω∙cos(ωx)   ... (6)

It's important to note that in this case, since the function f(x, y) does not contain any terms that depend on y, the second partial derivative with respect to y (∂²f/∂y²) evaluates to zero.

The mixed partial derivatives (∂²f/∂x∂y and ∂²f/∂y∂x) are equal, which is a property known as Clairaut's theorem for continuous functions.

Learn more about partial derivatives:

https://brainly.com/question/30217886

#SPJ11

Answer:

[tex]144a^8g^14[/tex]

Step-by-step explanation:

the powers are 8 and 14

The solution to the given differential equation that satisfies the initial condition P(1) = 3 is

[tex]P(t) = 3e^(t-1).[/tex]

To solve the differential equation, we can start by separating the variables and integrating. The given equation is dP/dt = Ce, where C is a constant.

Separating the variables:

dP/Ce = dt

Integrating both sides:

∫ dP/Ce = ∫ dt

Applying the integral:

ln|P| = t + K, where K is the constant of integration

Simplifying the natural logarithm:

ln|P| = t + ln|C|

Using properties of logarithms, we can combine the logarithms into one:

ln|P/C| = t + ln|e|

Simplifying further:

ln|P/C| = t + 1

Exponentiating both sides:

|P/C| = e⁽ᵗ⁺¹⁾

Removing the absolute value:

P/C = e⁽ᵗ⁺¹⁾ or P/C = -e⁽ᵗ⁺¹⁾

Multiplying both sides by C:

P = Ce⁽ᵗ⁺¹⁾ or P = -Ce⁽ᵗ⁺¹⁾

To find the particular solution that satisfies the initial condition P(1) = 3, we substitute t = 1 and P = 3 into the equation:

3 = Ce¹

Simplifying:

3 = Ce²

Solving for C:

C = 3/e²

Substituting the value of C back into the general solution, we get the particular solution:

P(t) = (3/e²)e⁽ᵗ⁺¹⁾

Simplifying further:

P(t) = 3e₍ₜ₋₁₎

learn more about Differential equations here:

https://brainly.com/question/25731911

#SPJ4

The partial derivative of function R with respect to v, denoted as ∂R/∂v, can be found using the chain rule.

To find the partial derivative of R with respect to v, we apply the chain rule. Let's denote R(A, M, O) as R(u, v), where A(u, v), M(u, v), and O(u, v) are functions of u and v. According to the chain rule, the partial derivative of R with respect to v can be calculated as follows:

∂R/∂v = (∂R/∂A) * (∂A/∂v) + (∂R/∂M) * (∂M/∂v) + (∂R/∂O) * (∂O/∂v)

This equation shows that the partial derivative of R with respect to v is the sum of three terms. Each term represents the partial derivative of R with respect to one of the functions A, M, or O, multiplied by the partial derivative of that function with respect to v.

By applying the chain rule, we can analyze the impact of changes in v on the overall function R. It allows us to break down the complex function into simpler parts and understand how each component contributes to the variation in R concerning v.

Learn more about partial derivative here:

https://brainly.com/question/32387059

#SPJ11

Answer:

y=30x+300

14 weeks

Step-by-step explanation:

Part A:

To begin, we are asked to write an equation.  We are given the amount you start with, which is $300, and you put $30 in every week.

We can write an equation that looks like:

y=30x+300

with x being the number of weeks you put in money.

Part B:

Part B asks us to find x, the number of weeks that you had to put in money to save a total of $720.

We have the equation:

y=30x+300

with x being the number of weeks, and y being the total amount, $720.  This means we can substitute:

720=30x+300

subtract 300 from both sides

420=30x

divide both sides by 30

14=x

So, you had to have been saving for 14 weeks.

Hope this helps! :)

To determine the new limits of integration when using the change of variables u = [tex]x^2[/tex] - 9, we need to substitute the original limits of integration into the variable transformation.

Given that the original definite integral is denoted as ∫ f(x) dx with limits of integration from 3 to b, we will substitute these values into the variable transformation u = [tex]x^2[/tex] - 9.

For the lower limit of integration, we substitute x = 3 into the transformation:

u = [tex](3)^2[/tex] - 9

u = 9 - 9

u = 0

Therefore, the new lower limit of integration is 0.

For the upper limit of integration, we substitute x = b into the transformation:

u = [tex](b)^2 - 9[/tex]

We don't have the specific value for b, so we leave it as it is. The upper limit in terms of the new variable u is[tex](b^2 - 9)[/tex].

Hence, the new limits of integration after the change of variables are 0 (lower limit) to [tex](b^2 - 9)[/tex] (upper limit).

To learn more about limits of integration visit:

https://brainly.com/question/32233159

#SPJ11