According to this partial W-2 form, how much money was paid in FICA taxes?
A. $418.53
B. $1789.87
C. $1906.86
D. $2208.10

Plum Island Lighthouse can light up the harbor 974.44 feet away from its base.

The angle of depression refers to the angle at which an observer is looking down from an object to a point of reference below. If the angle of depression is increased, the distance from the object to the point of reference decreases. When there is a 2-degree angle of depression, the following formula is used to determine the distance between the observer and the point of reference (in this case, the harbor):tan θ = opposite/adjacent

where θ is the angle of depression, opposite is the height of the object, and adjacent is the distance between the object and the point of reference. Tan 2 = 34/x where x is the distance between the lighthouse and the harbor.tan 2 = 0.03492The angle of depression must be converted to radians to use a calculator.θ = 2π/360 = 0.03491 radians

Therefore,34/x = 0.03492x = 34/0.03492 = 974.44 feet.

Learn more about  angle of depression:https://brainly.com/question/27865363

#SPJ11

Answer:

No it can,t be in standard for

A basis for the subspace of all vectors satisfying the equation x + y + z = 0 is {(-1, 0, 1), (0, 1, -1)}.

SOLUTION:

A basis for the subspace of all vectors (x, y, z) satisfying the single equation x + y + z = 0 can be found by solving this system of linear equations.

Step 1: Choose two variables to express in terms of the remaining variable.
Let's express x and y in terms of z. From the given equation, we get:
x = -y - z
y = -x - z

Step 2: Choose two independent vectors that satisfy the equations.
We can choose two independent vectors by setting z = 1 and z = -1:

When z = 1:
x = -y - 1
y = -x - 1
Let y = 0, then x = -1, so one vector is (-1, 0, 1).

When z = -1:
x = -y + 1
y = -x + 1
Let x = 0, then y = 1, so the other vector is (0, 1, -1).

Therefore, a basis for the subspace of all vectors satisfying the equation x + y + z = 0 is {(-1, 0, 1), (0, 1, -1)}.

To know more about Linear Equations:

https://brainly.com/question/11897796

#SPJ11

Using the distributive property to generate an equivalent expression of 2(x+5) as equal to 2x+5, the mistake the student made was 2. 2 was not multiplied by 5.

According to the distributive property, multiplying the sum of two or more addends by a number results similarly as multiplying each addend individually by the number and then adding the products together.

For instance, in the expression, 2(x + 5), the equivalent expression should be 2x + 10 instead of 2x + 5.

Thus, we can conclude that the student erred by failing to multiply 2 by 5 as they multiplied 2 by x, which means that they did not apply the distributive property properly.

Learn more about the distributive property of multiplication at https://brainly.com/question/2807928

#SPJ1

This can be calculated by multiplying the number of tickets sold by their respective prices: 200 x $35 = $7,000 and 50 x $40 = $2,375.

The local theater fundraiser sold 200 pre-event tickets at $35 each and 50 at-the-door tickets at $40 each to generate a total revenue of $9,375. This can be calculated by multiplying the number of tickets sold by their respective prices: 200 x $35 = $7,000 and 50 x $40 = $2,375.

Learn more about Theater fundraiser

brainly.com/question/18688531

#SPJ11

The first four terms of the sequence are 3, -15, 75, and -375.

In a arithmetic sequence, the common difference is the fixed value that is added to (or subtracted from) each term to get the next term in the sequence.  

To find the first four terms of the sequence given by aₙ= 3(-5)ⁿ⁻¹, we simply substitute n = 1, 2, 3, and 4, respectively, into the formula for an and evaluate:

a₁= 3(-5)¹⁻¹ = 3(-5)⁰= 3(1) = 3

a₂ = 3(-5)²⁻¹ = 3(-5)¹= -15

a₃ = 3(-5)³⁻¹ = 3(-5)²= 75

a₄= 3(-5)⁴⁻¹ = 3(-5)³= -375

Therefore, the first four terms of the sequence are 3, -15, 75, and -375.

To know more about arithmetic, visit:

https://brainly.com/question/11559160

#SPJ1

Answer:

Hi There the answer for this one would be 20 and 90

Step-by-step explanation:

Answer: 3

Step-by-step explanation:

k = y/x

Answer:

10

Step-by-step explanation:

7 rounds to 10

9 rounds to 10

19 rounds to 20

so Vicki has 40 birds

9 rounds to 10

12 rounds to 10

29 rounds to 30

so johnny has 50 birds

now subtract 50-40=10

The probability of getting all tails when flipping a coin three times can be calculated using the multiplication rule of probability. For each flip of the coin, there are two possible outcomes: heads or tails.

Assuming the coin is fair, both outcomes are equally likely, so the probability of getting tails on any one flip is 1/2.

P(all tails) = P(tails on first flip) x P(tails on second flip) x P(tails on third flip)

= (1/2) x (1/2) x (1/2)

= 1/8

Therefore, the probability of getting all tails when flipping a coin three times is 1/8 or 0.125 when expressed as a decimal rounded to four decimal places.

To learn more about “probability” refer to the https://brainly.com/question/13604758

#SPJ11

Answer:

When calculating the area of a triangle, you multiply the base by the height and then divide the result by 2. This is because a triangle is half of a parallelogram or a rectangle, and these shapes have an area equal to base times height. By dividing by 2, you are finding half of the area of the parallelogram or rectangle.

For a trapezoid, you can find the area by taking the average of the bases and multiplying it by the height. So the formula for the area of a trapezoid is A = (b1 + b2)h/2, where b1 and b2 are the lengths of the two parallel bases and h is the height. There is no need to divide the result by 2 because the formula already takes the average of the bases into account.

From the given information provided, Odero would have had to sell the suit for 1224 to make a profit of 20%.

If Odero sold a suit for 960 and made a loss of 20%, it means his selling price was only 80% of the cost price. We can use this information to find his cost price:

Cost price = Selling price / (1 - Loss%)

Cost price = 960 / (1 - 0.20)

Cost price = 960 / 0.80

Cost price = 1200

Therefore, Odero's cost price for the suit was 1200.

Now, we need to find the selling price that would give him a profit of 20%. Let's call this selling price S:

Profit% = (Selling price - Cost price) / Cost price × 100

20% = (S - 1200) / 1200 × 100

2 = (S - 1200) / 12

S - 1200 = 24

S = 1224

Learn more about profit here: brainly.com/question/26483369

#SPJ4

The overall height of the framed picture is 89cm in the total.

The mount is 6 cm across the top and sides and 9 cm across the bottom. As a result, the mount's overall height will be:

45 cm = 6 cm (top) + 30 cm (image height) + 9 cm (bottom).

The mount's entire breadth will be:

6 cm (left) + 40 cm (width of the image) + 6 cm (right) = 52 cm

To get the total height of the framed image, multiply the height of the mount by the height of the picture by twice the width of the frame (since the frame goes around all four sides of the picture).

As a result, the overall height of the framed image will be:

45 centimetre plus 40 cm plus 2(2 cm) Equals 89 cm.

Learn more about area and geometry at

https://brainly.com/question/13487289

#SPJ4

Answer:  The total area for the door is 1.89 and the total area for the windows is 7.2

Step-by-step explanation:

door+ 0.9 x2.1= 1.89 and window= 1.5 x 1.2=1.8 x 4= 7.2

Answer:

1.65 pounds

Step-by-step explanation:

6.6 ÷ 4 = 1.65

Answer:

1.65

Step-by-step explanation:

since all together it weighs 6.6 pounds then 1 = x then you cross multiply after cross multiplying you divide 4 by 6.6. Then x = 1.65

To prove that the functions e^(r1*t), e^(r2*t), and e^(r3*t) are linearly independent on (-∞,∞) for distinct real numbers r1, r2, and r3, we will follow the hint provided:

1. Assume to the contrary that e^(r1*t) = C1*e^(r2*t) + C2*e^(r3*t) for all t, where C1 and C2 are constants.
2. Divide both sides of the equation by e^(r1*t) to obtain: 1 = C1*e^((r2-r1)*t) + C2*e^((r3-r1)*t).
3. Differentiate both sides of the equation with respect to t:
  0 = C1*(r2-r1)*e^((r2-r1)*t) + C2*(r3-r1)*e^((r3-r1)*t).
4. Now, observe that e^((r2-r1)*t) and e^((r3-r1)*t) are linearly dependent, which is a contradiction, since we know that r1, r2, and r3 are distinct real numbers, and the exponential functions with distinct exponents are linearly independent.Thus, the functions e^(r1*t), e^(r2*t), and e^(r3*t) are linearly independent on (-∞,∞) for distinct real numbers r1, r2, and r3.

Learn More About Linearly Independent Vectors: https://brainly.com/question/31328368

#SPJ11

Answer: yes

Step-by-step explanation:

there is a 50% chance of landing on heads which means that you are statistically likely to have cereals for half a month and toast for half a month. half a month is usually 15 days so your friend is correct

please mark brailiest

Answer:

16

Step-by-step explanation:

because it is a square number. The other numbers, if you square root them you won't get a whole number.

Answer: 0%

Step-by-step explanation:

It's impossible for it to be different than 75 or 97

Answer:

To convert a decimal to an equivalent fraction, we need to first determine the place value of the decimal. For example, a decimal that ends in the tenths place (such as 0.4) has a denominator of 10. A decimal that ends in the hundredths place (such as 0.25) has a denominator of 100.

Once we have determined the denominator, we can convert the decimal to a fraction by placing the digits of the decimal in the numerator and the denominator. For example, 0.4 can be converted to the fraction 4/10. We can simplify this fraction by dividing both the numerator and denominator by their greatest common factor, which in this case is 2. So 4/10 simplifies to 2/5.

In general, to convert a decimal to a fraction, we can follow these steps:

1. Determine the denominator based on the place value of the decimal.

2. Place the digits of the decimal in the numerator and the denominator.

3. Simplify the fraction by dividing both the numerator and denominator by their greatest common factor.

It's important to note that sometimes decimals can be rounded, so the resulting fraction may not be exact. In such cases, we can use approximations or continue to simplify the fraction until we reach a desired level of accuracy.

It can be stated that a minimum of 90.82% of houses would fall within the price range of $418,500 to $621,500.

The given data are as follows:

Mean price (μ) = $520000

Standard deviation (σ) = $58000

Price range: $418500 to $621500

We are to find the percentage of homes priced between $418500 and $621500.To find the required percentage, we first need to standardize the given range of prices by converting them into z-scores.

The z-score formula is z = (x - μ) / σwhere x is the price, μ is the mean price, and σ is the standard deviation. So, for the lower limit: z₁ = (418500 - 520000) / 58000 = -1.75 And for the upper limit: z₂ = (621500 - 520000) / 58000 = 1.75

Now, we need to find the area under the normal curve between these two z-scores, which represents the percentage of homes priced between $418500 and $621500. To do this, we can use a calculator.

The area between $418500 and $621500 corresponds to the area between z₁ and z₂ on the standard normal distribution curve. The area between z₁ and z₂ is 0.9082 (rounded to 4 decimal places).

Therefore, we can say that at least 90.82% of homes would be priced between $418500 and $621500.

To know more about standard normal distribution curve, refer here:

https://brainly.com/question/15395456#

#SPJ11

There is only one equiangular octagon that Jordan can create with side lengths as the first 8 positive integers.

To create an equiangular octagon with side lengths as the first 8 positive integers, each side must have a different length. The sum of the interior angles of an octagon is 1080 degrees, so each angle in the octagon must measure 135 degrees.

If we arrange the 8 integers in decreasing order, we can label the longest side as a and the remaining sides as b1, b2, b3, b4, b5, b6, in descending order. Then, we must have:

a + b1 + b2 = a + b2 + b3 = a + b3 + b4 = a + b4 + b5 = a + b5 + b6 = a + b6 + b1 = 135 degrees

Simplify each equation, we get:

b1 - b3 = b2 - b4 = b3 - b5 = b4 - b6 = b5 - b1 = b6 - a

Since all the side lengths are different, we can use these equations to find all possible combinations of side lengths. By inspection, we can see that there is only one set of side lengths that satisfies these conditions, namely:

a = 8

b1 = 7

b2 = 6

b3 = 5

b4 = 4

b5 = 3

b6 = 2

Learn more about integers here:

https://brainly.com/question/10930045

#SPJ4

Answer: Should be standard form.

Step-by-step explanation: Just cause the others don't really make sense and the equation looks basic.

Answer:

Step-by-step explanation:

[tex](x+14)^2+x^2=22^2[/tex]          (Pythagoras Theorem)

[tex](x^2+28x+196)+x^2=484[/tex]

[tex]2x^2+28x+196=484[/tex]

[tex]2x^2+28x-288=0[/tex]

[tex]x^2+14x-144=0[/tex]

Using quadratic formula,

  [tex]x=\frac{-b\pm \sqrt{b^2-4ac} }{2a}[/tex]  

  [tex]x=\frac{-14\pm \sqrt{(14^2-4\times1\times(-144)} }{2\times1}[/tex]

[tex]=\frac{-14\pm \sqrt{(196+576} }{2}[/tex]

[tex]=\frac{-14\pm 2\sqrt{193} }{2}[/tex]

[tex]=-7\pm\sqrt{193}[/tex]

[tex]=-7\pm13.89[/tex]

[tex]=6.89 ,-20.89[/tex]      (-20.89 is not useful...cannot have a negative length for

                             radius)                  

Solution: radius is 6.89

To ascertain whether there are more faulty microchips across the entire cargo, statistical analysis is required. You can utilise proportional or hypothesis tests.

Based on the presented dot plots, it appears that there are typically more faulty microchips in the samples from Hitech Microchips compared to those from Speedy Microchips. Nevertheless, statistical research would be required to verify whether this tendency is consistent over all 2,000 microchip shipments from each brand.

One method would be to total the defective microchips across all 15 samples and divide by the total number of microchips to determine the percentage of defective microchips in each brand's shipment (2,000).

Instead, a hypothesis test might be performed to see if there is a statistically significant difference in the proportion of faulty microchips between the two brands. This would include comparing sample proportions and taking sample size and variability into consideration.

learn more about Microchips here:

https://brainly.com/question/23764618

#SPJ4

Gene expression occurs through transcription and then translation. From the given list, select all that pertain to transcription. Transcription is the process of converting DNA into RNA. The following are the items that are included in transcription: Using DNA as a template Using RNA polymerase Creation of mRNA Reading codons The RNA polymerase enzyme is responsible for catalyzing the formation of phosphodiester bonds between nucleotides that have been added to the growing RNA chain.

The RNA polymerase enzyme binds to the promoter region of a gene before unwinding the DNA helix and beginning transcription. In transcription, the DNA template strand is read by RNA polymerase in the 3′-to-5′ direction, but RNA is synthesized in the 5′-to-3′ direction. RNA polymerase reads the DNA template strand in the 3′-to-5′ direction, synthesizes the mRNA transcript in the 5′-to-3′ direction, and produces a new RNA molecule that is complementary to the DNA template strand. Thus, transcription is responsible for creating a single-stranded RNA molecule called messenger RNA (mRNA).Therefore, the correct answer is:

Using RNA polymerase Using DNA as a template Creation of mRNA Reading codons

for such more questions on transcription

https://brainly.com/question/25763301

#SPJ11

the probability that a randomly selected female has a pulse rate between 60 and 90 beats per minute is approximately [tex]0.0214 or 2.14%.[/tex]

(a)The probability of the pulse rate being less than 79 beats per minute, but there is no information given about the pulse rate. Please provide the necessary information for me to answer this part of the question.

(b) To find the 75th percentile for pulse rates of females, we need to use the normal distribution table or a calculator to find the z-score corresponding to the 75th percentile, which is 0.674. Then, we can use the formula:

[tex]z = (x - μ) / σ[/tex]

where x is the pulse rate, μ is the mean, and σ is the standard deviation. Rearranging the formula to solve for x, we get:

[tex]x = z * σ + μ[/tex]
[tex]x = 0.674 * 39 + 171[/tex]
[tex]x = 197.186[/tex]

Therefore, the 75th percentile for pulse rates of females is approximately 197 beats per minute.

(c) To find the probability that a randomly selected female has a pulse rate between 60 and 90 beats per minute, we need to standardize the values using the z-score formula:

[tex]z1 = (60 - 171) / 39 = -2.846[/tex]
[tex]z2 = (90 - 171) / 39 = -1.974[/tex]

Then, we can use the normal distribution table or a calculator to find the area under the standard normal distribution curve between these two z-scores:

[tex]P(-2.846 < Z < -1.974) = 0.0214[/tex]

for such more questions on random variables

https://brainly.com/question/14356285

#SPJ11

Answer:

Step-by-step explanation:

x^2-3x-40=0

x^2-3x=40

2x-6x=40

-4x=40

-4x/4 = 40/-4

x= -10

Answer:

x=8 or x=-5

Step-by-step explanation:

x²-3x-40=0

x²-8x+5x-40=0

x(x-8)+5(x-8)=0

(x-8)(x+5)=0

⇒x=8 or x=-5

Answer:

18.29 x 10^12

Step-by-step explanation:

you can simplify the answer as needed