an endangered species has a population of 5000. scientists estimate that the stock is decreasing at 3% per year. at this rate, approximately how many years will it be before 60% of the species remains?

The least common multiple (LCM) of two or more integers is the smallest positive integer that is a multiple of all of them. In other words, it is the smallest number that is divisible by each of the given numbers without leaving a remainder. [tex]3(5/8) + 2(3/8) = 6.[/tex]

To add the mixed numbers 5 3/8 and 3 2/8, we need to convert them to fractions with a common denominator. Since both have a denominator of 8, we can add the whole numbers to the fractions to get:

[tex]5 3/8 = 5 + 3/8 = 40/8 + 3/8 = 43/8[/tex]

[tex]3 2/8 = 3 + 2/8 = 24/8 + 2/8 = 26/8[/tex]

Now we can add these fractions:

[tex]5 3/8 + 3 2/8 = 43/8 + 26/8 = 69/8[/tex]

So the sum of  [tex]5 3/8[/tex] and [tex]3 2/8[/tex]  as a fraction is [tex]69/8[/tex]  .

The LCM is often used when adding or subtracting fractions with different denominators, since we need to find a common denominator to perform the operation. To do this, we can find the LCM of the denominators and use it as the common denominator.

To write equivalent fractions with a common denominator, we need to find the least common multiple of the denominators, which in this case is 8.

For [tex]3(5/8)[/tex]  :

[tex]3(8/8) + 5/8 = 24/8 + 5/8 = 29/8[/tex]

For [tex]2(3/8):[/tex]

[tex]2(8/8) + 3/8 = 16/8 + 3/8 = 19/8[/tex]

To add these fractions, we simply add their numerators:

[tex]3(5/8) + 2(3/8) = 29/8 + 19/8 = 48/8 = 6[/tex]

Therefore, [tex]3(5/8) + 2(3/8) = 6.[/tex]

Learn more about integer here:

https://brainly.com/question/15276410

#SPJ1

This formula generates the sequence 0, -1/2, 2/3, -3/4, 4/5, -5/6, 6/7, ...

Notice that the sequence alternates between positive and negative terms and that the denominators of each term increase by 1 while the numerators increase by 1 or -1. To find the explicit formula, we can write it in terms of its general form:

a1 = 0

a2 = -1/2

a3 = 2/3

a4 = -3/4

a5 = 4/5

a6 = -5/6

a7 = 6/7

We can see that the numerator of each term is equal to its index number, n, if n is even and equal to -n if n is odd. The denominator of each term is equal to n+1 for all terms.

Using this observation, we can write the explicit formula for the sequence as:

an = (-1)^(n+1) * n / (n+1)

where (-1)^(n+1) is equal to -1 if n is odd and 1 if n is even. This formula generates the sequence 0, -1/2, 2/3, -3/4, 4/5, -5/6, 6/7, ...

To learn more about sequence visit: https://brainly.com/question/30262438

#SPJ11

A person has $785.35 after 7 years in the account.

Interest that is compounded continuously to the principal amount. This interest rate provides exponential growth for a period of time.

The formula of continuous compound interest rate;

[tex]V = Pe^{rt}[/tex],

Where P is the principal amount, r is the interest rate and t is the time period.

A person places $398 in an investment account earning an annual rate of 9.7%, compounded continuously.

Using the formula:

[tex]V = Pe^{rt}[/tex], where P = $398, r = 0.097 (9.7% as a decimal), and t = 7 years, we can calculate the value of the account after 7 years as:

V = 398[tex]e^(0.0977)[/tex]

V = 398[tex]e^{0.679}[/tex]

V = 784.818126761

V = $785.35 (rounded to the nearest cent)

Therefore, the amount of money in the account after 7 years is $785.35.

To learn more about continuous compound interest;

https://brainly.com/question/18722165

#SPJ2

Yes, if you have minimums and maximums that are several standard deviations away from the rest of the data observations, medians would be the best measure of central tendency.

Having minimums and maximums that are far away (several standard deviations away from the mean) from the rest of the data observations, medians would be the best measure of central tendency. This is because, when there are outliers or extreme values in a dataset, the mean can be influenced and it may not be an accurate representation of the central tendency.

However, the median is not affected by extreme values or outliers since it only depends on the middle value of the dataset. Therefore, if the dataset has outliers, it is better to use the median as a measure of central tendency to provide a more accurate representation of the data.

To know more about the "standard deviations": https://brainly.com/question/475676

#SPJ11

For the Yoko Fund, the Treynor ratio is 6.0%, although none of the answer choices provided is a close approximation, we can choose option c. 6.750

The Treynor ratio measures the excess return earned by an investment per unit of systematic risk (i.e., beta). It is calculated as the difference between the return of the investment and the risk-free rate, divided by the investment's beta.

The formula for the Treynor ratio is:

Treynor Ratio = (Return of the Investment - Risk-Free Rate) / Beta

In this case, the return of the Yoko Fund is 11.2%, the risk-free rate is 3.1%, the beta is 1.20, and we are given the standard deviation of the Yoko Fund's returns, which is 17.5%.

Using the formula, we get:

Treynor Ratio = (11.2% - 3.1%) / 1.20

= 6.0%

Therefore, the Treynor ratio for the Yoko Fund is 6.0%.

None of the answer choices is exactly equal to 6.0%, but the closest one is (c) 6.750.


To know more about Treynor ratio refer here:

https://brainly.com/question/28180396#

#SPJ11

Additionally, you should focus on answering the specific question being asked and ignore any typos or irrelevant parts of the question.

Using laws of logarithms, the given expressions can be written using sums and/or differences of logarithmic expressions which do not contain the logarithms of products, quotients, or powers as follows:

a.[tex] log(45x) = log(45) + log(x)b. log(x⁵⁵) = 55log(x)c. 10 log(⁵√x) = log(x)^(10/5) = log(x)^2 = 2log(x)2/5 log(x¹⁰) = (2/5)log(x) + (2/5)log(x) + ... + (2/5)log(x) (10 times)= 2log(x^10)[/tex]

for such more questions on logarithms

https://brainly.com/question/29779861

#SPJ11

Hi! I understand that you want help finding the values of m∆1 and m∆2. To provide a step-by-step explanation, I need more information about the problem, such as the type of triangles, angles, or side lengths involved. Please provide more context or details, and I will be happy to help you.

#SPJ11

Answer: 35 Millimeters

Step-by-step explanation: Add all the numbers around your shape and you got the perimeter :)

Answer: 35 mm

Step-by-step explanation:

Add all sides together: 4+13+13+5 = 35

Answer:

i think that it is d or c just guessing

The earnings made in 1 day when charging a device with a power rating of 12 W at a rate of 6 cents per kilowatt hour is 0.01728.

Given, Power rating of charger = 12 W. Charge per kilowatt hour = 6 cents = 0.06/kWh.To calculate the earnings in 1 day, we need to calculate the power consumed by the charger in 1 day first.

P = Power rating of charger = 12 Wt = Time = 1 day = 24 hours. Energy consumed = Power x Time. E = P x t= 12 W x 24 hours= 288 Wh = 0.288 kWh. Therefore, energy consumed by the charger in 1 day = 0.288 kWh.

Now, we can calculate the earnings in 1 day as follows: Charge per unit = 0.06/kWh. Earnings = Energy consumed x Charge per unit. Earnings = 0.288 kWh x 0.06/kWh= 0.01728.

Therefore, the earnings made in 1 day when charging a device with a power rating of 12 W at a rate of 6 cents per kilowatt hour is 0.01728.

To know more about power refer here:

https://brainly.com/question/26256725

#SPJ11

The propensity scoring method is a statistical technique used to adjust for differences in the characteristics of groups being compared in a study. In this case, we want to adjust for the fact that respondents aged 70 or older are underrepresented in an internet sample.

To do this, we can assign a propensity score to each individual in the sample based on their likelihood of being in the sample, given their age. We can then use this score to weight their responses to account for the underrepresentation of older individuals.

In this case, we know that respondents aged 70 or older are only one-third as likely to be in an internet sample as their actual incidence in the population. This means that we can assign a propensity score of 3 to each individual aged 70 or older in the sample, and a propensity score of 1 to everyone else.

Using these propensity scores, we can weight the responses of each individual in the sample. Responses from individuals with a propensity score of 3 would be weighted by a factor of 3, while responses from individuals with a propensity score of 1 would be weighted by a factor of 1.

By adjusting for the underrepresentation of older individuals in this way, we can obtain more accurate estimates of the characteristics of the population being studied, and reduce the potential for bias in our analysis.

For more details about propensity click here:

https://brainly.com/question/28766632#

#SPJ11

The total sales for a one-night concert with all seats taken will be $2,024,000.

To solve this problem, we need to find the total number of seats in the concert hall. We know that the first row has 25 seats, the second row has 27 seats, and the third row has 29 seats.

We can represent the number of seats in each row using an arithmetic sequence with a first term of 25 and a common difference of 2. The nth term of this sequence can be found using the formula:

a_n = a_1 + (n - 1)d

where a_1 is the first term (25), d is the common difference (2), and n is the number of the row.

Using this formula, we can find the number of seats in the 20th row

a_20 = 25 + (20 - 1)2

a_20 = 25 + 38

a_20 = 63

Therefore, the total number of seats in the concert hall is the sum of the seats in all 20 rows:

total seats = 25 + 27 + 29 + ... + 63

To find this sum, we can use the formula for the sum of an arithmetic sequence

S_n = (n/2)(a_1 + a_n)

where S_n is the sum of the first n terms of the sequence. In this case, n = 20, a_1 = 25, and a_n = 63.

S_20 = (20/2)(25 + 63)

S_20 = 10(88)

S_20 = 880

Therefore, there are a total of 880 seats in the concert hall. If all seats are taken, the total sales for the one-night concert will be

total sales = number of seats x price per ticket

total sales = 880 x $2,300

total sales = $2,024,000

Learn more about arithmetic sequence here

brainly.com/question/28882428

#SPJ4

The length of the segment UN is 11.05 units.

For any pair of points (x₁, y₁) and (x₂, y₂), the distance between the two points is given by the formula:

distance = √( (x₂ - x₁)² + (y₂ - y₁)²)

Here we know that the points are:

U = (3, -5)

N = (2,6)

The distance between these two points is then:

distance = √( (3 - 2)² + (-5 - 6)²)

distance = √122 = 11.05

The length of the segment is 11.05 units.

Learn more about distances at:

https://brainly.com/question/7243416

#SPJ1

An all-night study session can help you catch up on school assignments. The only way to become a straight-A student is efficient study habits.

Most students pseudo-work and end up wasting valuable time.

The correct option is (C)

This is based on an article about pseudo-working which is something that students do where they read for long hours and appear very serious in reading when in fact they do not focus on the reading and therefore end up not grasping much.

The author was trying to express that most students do this and that it is simply a waste of time which could have been spent actually studying.

The correct option is (C).

Learn more about Article at:

https://brainly.com/question/14172780

#SPJ4

The given question is incomplete, complete question is:

What central idea about studying does the author express in Passage 1?

A Straight-A students know how to work harder than other students.

B The only way to become a straight-A student is efficient study habits.

C Most students pseudo-work and end up wasting valuable time.

D An all-night study session can help you catch up on school assignments.

The volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet

The top of an l-shaped desk has the dimensions shown in the diagram. To determine the volume of wood needed to make the top of the desk, we must use the formula for volume. The formula for volume is length times width times height, or V = lwh. In this case, the length of the top is 28 inches, the width is 45 inches, and the height is 0.75 inches.

Plugging these values into the volume formula gives us V = 28 x 45 x 0.75, which equals 1260 cubic inches. Since wood is typically sold in cubic feet, we must convert this volume to cubic feet by dividing it by 1728, the number of cubic inches in one cubic foot. 1260/1728 = 0.728, so the volume of wood needed to make the top of the desk is 0.728 cubic feet.

To summarize, the volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet. This was determined by using the volume formula, which is V = lwh, where l is the length, w is the width, and h is the height. The length, width, and height of the desk top were 28 inches, 45 inches, and 0.75 inches, respectively. By plugging these values into the volume formula and converting to cubic feet, we determined the volume of wood needed is 0.728 cubic feet.

See more about volume at: https://brainly.com/question/463363

#SPJ11

(a) The probability that a 1 is received is 4/9.

(b) The (unconditional) probability that an error occurs is 1/6.

(c)  The probability that a 1 was sent, given that a 1 was received, is 7/8.

To solve this problem, we can use Bayes' theorem and conditional probability.

(a) The probability that a 1 is received can be found using the law of total probability. We can calculate it by considering the probabilities of two mutually exclusive events: receiving a 1 when a 1 is sent and receiving a 1 when a 0 is sent.

Let P(1) be the probability that a 1 is sent and P(0) be the probability that a 0 is sent. Both probabilities are equal to 1/2 since they are equally likely.

The probability of receiving a 1 when a 1 is sent is 1 minus the probability of an error when a 1 is sent, which is 1 - (2/9) = 7/9.

The probability of receiving a 1 when a 0 is sent is the probability of an error when a 0 is sent, which is 1/9.

Using the law of total probability:

P(1 received) = P(1 sent) x P(1 received | 1 sent) + P(0 sent) x P(1 received | 0 sent)

P(1 received) = (1/2) x (7/9) + (1/2) x (1/9)

P(1 received) = 7/18 + 1/18

P(1 received) = 8/18

P(1 received) = 4/9

Therefore, the probability that a 1 is received is 4/9.

(b) The (unconditional) probability that an error occurs can be calculated by considering the probabilities of two mutually exclusive events: an error occurs when a 1 is sent and an error occurs when a 0 is sent.

Using the law of total probability:

P(Error) = P(1 sent) x P(Error | 1 sent) + P(0 sent) x P(Error | 0 sent)

P(Error) = (1/2) x (2/9) + (1/2) x (1/9)

P(Error) = 2/18 + 1/18

P(Error) = 3/18

P(Error) = 1/6

Therefore, the (unconditional) probability that an error occurs is 1/6.

(c) The probability that a 1 was sent, given that a 1 was received, can be calculated using Bayes' theorem:

P(1 sent | 1 received) = (P(1 sent) x P(1 received | 1 sent)) / P(1 received)

P(1 sent | 1 received )= (1/2) x (7/9) / (4/9)

P(1 sent | 1 received) = (1/2) x (7/9) * (9/4)

P(1 sent | 1 received) = 7/8

Therefore, the probability that a 1 was sent, given that a 1 was received, is 7/8.

To know more about probability follow

https://brainly.com/question/31024376

#SPJ12

Answer:

-27/4

3/8+3/4=3/8+(3×2)(3×2)

3/8+4/8=7/8

-6×7/8

=-27/4

There is 78.54 mI of miIk in the gIass.

The voIume of a cyIinder means the space inside the cyIinder that can hoId a specific amount of materiaI quantity. In simpIer words, the capacity of a cyIinder to hoId a thing is its voIume. Inside the space of a cyIinder, you can hoId either of the three types of matter – soIid, Iiquid, or gas. This capacity can onIy be witnessed in a three-dimensionaI cyIinder, i.e., you cannot hoId any Iiquid, soIid, or gas in a two-dimensionaI cyIinder.

The equation for the voIume of a cyIinder is V = Ah,

where A is the area of the base and h is the height.

Thus, the voIume can aIso be expressed as V = πr2h.

Find capacity of the gIass :

VoIume of the gIass = πr²h

Given radius = 5 ; Height = 2

VoIume of the gIass = π(5)²(2)

VoIume of the gIass = 157.08cm³

Find the voIume of the miIk :

If the gIass is haIf fuII,

VoIume of the miIk = 177.08 ÷ 2

VoIume of the miIk = 78.54 cm³

Convert cm³ to mI :

1 mI = 1000 cm³

78.54cm³ = 78.54 mI

There is 78.54 mI of miIk in the gIass.

To know more about volume

https://brainly.com/question/13338592

#SPJ1

There is a roughly 16.85% chance that a bassist will be the first musician to register for the jazz camp.

Experimental probability is a type of probability that is based on actual observations or experiments. It is also called empirical probability

The ratio of the frequency of an occurrence to the total number of trials or observations is known as the experimental probability. In this case, the event is the first musician to sign up being a bassist.

Since there were 15 bassists out of 89 musicians who attended the camp last year, the experimental probability of the first musician to sign up being a bassist is:

Experimental probability = Number of bassists / Total number of musicians

Experimental probability = 15 / 89

Experimental probability = 0.1685 or approximately 16.85%

As a result, there is a roughly 16.85% chance that a bassist will be the first musician to register for the jazz camp.

To know more about experimental probability visit:

https://brainly.com/question/30694293

#SPJ1

If the p-value of a hypothesis test is 0.016, it means that the probability of observing the data or more extreme data assuming the null hypothesis (i.e., the conveyor works properly) is 0.016. So, we reject the null hypothesis.

This p-value is relatively small and falls below the conventional significance level of 0.05. Therefore, we can reject the null hypothesis that the conveyor works properly and conclude that the conveyor is not sorting packages correctly.

However, we cannot determine the cause of the problem with the conveyor from this hypothesis test alone. Further investigation is necessary to identify the root cause of the issue and determine the appropriate corrective actions.

To know more about p-value:

https://brainly.com/question/30461126

#SPJ4

Answer: i am certain that the answer is -6

Therefore, the radius r of each of the small circles multiplied by [tex](3sqrt(3)/2)[/tex] to get the length of the diameter AB of the big circle.

A circle is a geometric form made up of all points that are spaced apart by a predetermined amount, known as the radius, from a specific point known as the center. The circumference of a circle is determined by the formula C = 2r, where r denotes the radius and (pi) denotes a mathematical constant roughly equivalent to 3.14159. Numerous areas of mathematics, science, and daily living frequently involve circles. They have a number of crucial characteristics that make them helpful in a variety of applications.

given

The line section PQ is the following length:

PQ is equal to [tex]sqrt(3r2/4) = sqrt(3)/r.[/tex]

In a similar manner, we can determine how long the line section QR is:

OQ2 - OR2 = QR2 = r2/4 - r2 = QR2 = -3r2/4

Therefore, QR is a line that goes beyond the spot R rather than a line segment.

The length of the large circle's diameter AB is determined by adding the lengths of PQ, QR, and RP, each of which is equivalent to (sqrt(3)/2)r. As a result, we have:

[tex]AB = 3 * (sqrt(3)/2) (3sqrt(3)/2)r = r[/tex]

Therefore, the radius r of each of the small circles multiplied by [tex](3sqrt(3)/2)[/tex] to get the length of the diameter AB of the big circle.

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

Answer: 3.6

Step-by-step explanation:

It's 3.6, hope it helped! :D

In cluster analysis, a method can be used to reduce bias due to the difference in units of measurement. One such method is called standardization.

Cluster analysis is a data mining approach that is widely utilized in data processing, image analysis, and other data-based analytics applications. It groups items that have comparable characteristics into clusters by separating them from other objects that do not share the same features.

Standardization is the process of converting variables with various scales to a common scale so that they can be compared fairly.

Standardization involves transforming all of the variables into comparable units of measurement by converting them into z-scores. This allows for the comparison of values without being affected by the different units of measurement.

The method that can be used to reduce bias due to the difference in units of measurement in cluster analysis is standardization, which converts variables with various scales to a common scale so that they can be compared fairly. This ensures that each variable contributes equally to the distance between the clusters.

Know more about cluster analysis here:

https://brainly.com/question/30738647

#SPJ11

Answer:

Step-by-step explanation:

Liam has 11/4 packets of red clay, which is equal to 33/12 packets of clay.

If he uses 5/3 packets of clay for crafting, he would have used 20/12 packets of clay.

To find how much clay he has left, we need to subtract the used amount from the original amount:

33/12 - 20/12 = 13/12

Therefore, Liam has 13/12 packets of clay left.

If you want each character to be approximately one inch in size, you would use a point size of 72 pts.

Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.

Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.

Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.

Therefore the correct answer is option b.) 72 pts.

To learn more about point size, refer:-

https://brainly.com/question/14052507

#SPJ4

The average temperature change per hour was -2.708 degrees Fahrenheit.

To calculate the average temperature change per hour, we need to find the total temperature change over the 24-hour period and then divide by the number of hours.

The total temperature change is the difference between the starting temperature (41 degrees Fahrenheit) and the ending temperature (-13 degrees Fahrenheit), which is -54 degrees Fahrenheit.

Dividing the total temperature change by the number of hours, we get:

-54 degrees Fahrenheit / 24 hours = -2.25 degrees Fahrenheit per hour.

Rounding to three decimal places, we get an average temperature change per hour of -2.708 degrees Fahrenheit per hour.

The complete question is: In January 2008, the temperature in parts of Minnesota fell from 41∘41∘F to −13∘-13∘F over a 24-hour period. What was the average temperature change per hour?

To know more about average temperature change, refer here:

https://brainly.com/question/30856890#

#SPJ11

The height RT from R to PQ is approximately 3.16 cm.

To find the area of triangle PQR, we can use the formula:

Area = 1/2 * base * height

Since PQR is isosceles with PQ = PR, the base is PQ or PR. We can choose PQ as the base. Then the height is PS.

Area of PQR = 1/2 * PQ * PS

Since PQ = PR = 7.5 cm and PS = 6 cm, we can substitute these values into the formula and simplify:

[tex]Area of PQR = 1/2 * 7.5 cm * 6 cm[/tex]

[tex]Area of PQR = 22.5 cm^2[/tex]

Therefore, the area of triangle PQR is [tex]22.5 cm^2[/tex].

To find the height RT from R to PQ, we can use the Pythagorean theorem.

Let's draw a perpendicular line from R to PQ, intersecting at T. Then we have a right triangle PRT with hypotenuse PR and legs PT and RT.

Since PQR is isosceles, we can also see that angle PQR is equal to angle PRQ. Therefore, angles PQR and PRQ are equal and each is approximately 69.3 degrees (using inverse cosine function).

Using the sine function, we can find the length of PT:

sin(69.3) = PT / 7.5

PT = 7.5 * sin(69.3)

PT ≈ 6.93 cm

Using the Pythagorean theorem, we can find the length of RT:

[tex]RT^2 + PT^2 = PR^2[/tex]

[tex]RT^2 = PR^2 - PT^2[/tex]

[tex]RT^2 = 7.5^2 - 6.93^2[/tex]

RT ≈ 3.16 cm

Learn more about area of triangle here https://brainly.com/question/19305981

#SPJ4