certain reaction has an activation energy of 34.34 kj/mol. 34.34 kj / mol. at what kelvin temperature will the reaction proceed 3.00 3.00 times faster than it did at 357 k?

The velocity of gas molecules in the gas phase and the temperature of the gas has: a direct relationship.

When gas molecules move they have kinetic energy, which is responsible for the velocity of gas molecules in the gas phase. The velocity of gas molecules depends on the temperature of the gas. As the temperature of the gas increases, the velocity of the gas molecules increases too.

The velocity of the gas molecules also depends on the mass of the gas molecules, temperature, and pressure of the gas. In other words, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas. This relationship is known as the Kinetic Theory of Gases.

This theory states that the higher the temperature of a gas, the faster its molecules move. This is due to the increase in the kinetic energy of the gas molecules. When the temperature of the gas is increased, the kinetic energy of the molecules also increases.

This increase in kinetic energy causes the gas molecules to move faster, which results in an increase in the velocity of gas molecules in the gas phase. When the temperature of the gas is decreased, the kinetic energy of the molecules decreases, which results in a decrease in the velocity of gas molecules in the gas phase.

Therefore, the velocity of gas molecules in the gas phase is directly proportional to the temperature of the gas.

To know more about molecules refer here:

https://brainly.com/question/19922822#

#SPJ11

The partial pressure of CH4 in the mixture is 239 torr.

To find the partial pressure of CH4 in the mixture, we need to use the mole fraction of CH4.

First, we need to find the moles of each component in the mixture. The molar mass of CH4 is 16.04 g/mol, so:

moles of CH4 = 90.0 g / 16.04 g/mol = 5.61 mol

The molar mass of Ar is 39.95 g/mol, so:

moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol

The total number of moles in the mixture is:

total moles = moles of CH4 + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol

Now we can find the mole fraction of CH4:

mole fraction of CH4 = moles of CH4 / total moles = 5.61 mol / 5.86 mol = 0.957

Finally, we can use the mole fraction to find the partial pressure of CH4 using Dalton's Law of Partial Pressures:

partial pressure of CH4 = mole fraction of CH4 x total pressure

partial pressure of CH4 = 0.957 x 250 torr = 239 torr

Therefore, the partial pressure of CH4 in the mixture is 239 torr.

To know more about pressure click here:

brainly.com/question/12971272

#SPJ4

The percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.

The mass percent composition of a compound is a measure of the ratio of the mass of each component to the total mass of the compound. It is denoted by w/w%.

The mass percentage of a component in a solution can be calculated using the following formula:

the mass percent of a component = (mass of the component ÷ total mass of solution) × 100

Assume the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g.

To determine the weight percentage of sugar in soda, the mass percent composition formula can be used as follows:

mass percent of sugar = (mass of sugar ÷ total mass of soda) × 100

mass percent of sugar = (31.0 g ÷ 370.0 g) × 100

mass percent of sugar = 0.0838 × 100

mass percent of sugar = 8.38%

Therefore, the percent by weight (w/w%) of sugar in soda, assuming the average mass of sugar in soda is 31.0 g and the total mass is 370.0 g, is 8.38%.

Know more about Mass percent composition here :

https://brainly.com/question/29520914

#SPJ11

The concentration of the original NaOH solution is 0.189 M.

What is Concentration?

Concentration is a measure of the amount of solute dissolved in a given amount of solvent or solution. It describes how much of a particular substance is present in a given volume or mass of a solution.

NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)

From the equation, we can see that the stoichiometry of the reaction is 1:1 between NaOH and HCl. This means that one mole of NaOH reacts with one mole of HCl.

We are given the volume of the NaOH solution as 35.0 mL, but we need to convert this to liters in order to use the concentration units of Molarity (mol/L).

35.0 mL = 0.0350 L

We are also given the volume and concentration of the HCl solution:

Volume of HCl solution = 26.5 mL = 0.0265 L

Concentration of HCl solution = 0.250 M

To determine the number of moles of HCl used in the reaction, we can use the following equation:

moles of HCl = concentration of HCl × volume of HCl solution

moles of HCl = 0.250 M × 0.0265 L = 0.006625 moles

Since the stoichiometry of the reaction is 1:1 between NaOH and HCl, the number of moles of NaOH used in the reaction is also 0.006625 moles.

To calculate the concentration of the original NaOH solution, we can use the following equation:

concentration of NaOH = moles of NaOH / volume of NaOH solution

concentration of NaOH = 0.006625 moles / 0.0350 L = 0.189 M

Learn more about Concentration from given link

https://brainly.com/question/17206790

#SPJ1

Firefighters must create a safe distance, alert the appropriate authorities, recognise the dangers, secure the area, follow the correct procedures for handling hazardous chemicals.

When a structure is on fire, the hunt for the point of origin starts outside and progresses within the building. Firefighters must always use PPE and respiratory protection while looking for the source of the problem until it is confirmed that the environment is safe.

By turning the water into steam, the fire's heat is absorbed, oxygen is displaced, and the hot gas layer is suitably cooled for the safety of the firefighters.

To know more about hazardous visit:-

https://brainly.com/question/13340017

#SPJ1

LiNHCH3 and an ester are combined to create a SNAc mechanism, the LUMO in this process is Option C- C-O σ* bond.

SNAc (substitution nucleophilic acyl-oxygen cleavage) is a chemical reaction mechanism used to substitute an acyl group for a nucleophile on an ester or a similar carbonyl compound. The mechanism is initiated by the formation of a covalent intermediate, followed by a nucleophilic attack by the nucleophile.

LiNHCH3 is a nucleophile that can participate in a SNAc reaction. When mixed with an ester, the LUMO (lowest unoccupied molecular orbital) of the ester is required for the reaction to occur. A LUMO can either be a π* bond or a σ* bond. The C-O σ* bond in the ester is the LUMO in this SNAc reaction, according to the question. therefore, the answer is C. C-O σ* bond.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ11

The order of the reaction with respect to NO2 is x = 1, and the order of the reaction with respect to CO is y = 0.5.

No2 (g) + CO(g) → NO(g) + CO2(g) is the given chemical reaction to calculate the order of the reaction with respect to the following reactants according to the given experimental data as mentioned below:

Let's understand this in detail:

Order of reaction with respect to NO2:

We know that the rate of reaction is given by the formula as follows,

Rate = k[NO2]^x [CO]^yWhere,

k = Rate constant

[NO2] = Concentration of NO2

[CO] = Concentration of CO

x and y = Order of reaction with respect to NO2 and CO, respectively. The first experiment data is taken into account for calculating the order of reaction with respect to NO2 as follows:

1.44 x 10^-5 = k [0.263]^x [0.826]^y......(i)

The second experiment data is taken into account for calculating the order of reaction with respect to NO2 as follows:1.44 x 10^-5 = k [0.263]^x [0.413]^y......(ii)

Now, dividing equation (i) by equation (ii), we get

[0.826]^y/[0.413]^y = 1 => (2)^(2y) = 2 => 2y = 1 => y = 0.5

Substituting the value of y in equation (i), we get

1.44 x 10^-5 = k [0.263]^x [0.826]^0.5=> k = 0.015

Therefore, the order of the reaction with respect to NO2 is x = 1.

Order of reaction with respect to CO:

The first experiment data is taken into account for calculating the order of reaction with respect to CO as follows:

1.44 x 10^-5 = k [0.263]^x [0.826]^y......(i)

The third experiment data is taken into account for calculating the order of reaction with respect to CO as follows:

5.76 x 10^-5 = k [0.526]^x [0.413]^y......(ii)

Now, dividing equation (i) by equation (ii), we ge

t[0.826]^y/[0.413]^y = 2 => 2y = 1 => y = 0.5

Substituting the value of y in equation (i), we get1.44 x 10^-5 = k [0.263]^x [0.826]^0.5=> k = 0.015

Therefore, the order of the reaction with respect to CO is y = 0.5. Hence, the order of the reaction with respect to NO2 is x = 1, and the reaction with respect to CO is y = 0.5.

Learn more about the order of reaction: What is the order of reaction with respect to a and b for a reaction that obeys the rate law: rate = k[a]4[b]5? https://brainly.com/question/28179168

#SPJ11

If a mechanism requires numerous parts to work together in order to operate properly, then the parts are said to be interdependent.

A mechanism is a collection of parts working together to accomplish a specific purpose or objective.  

The concept of mechanism is also utilized in engineering to describe objects that transmit or transform forces and motion, such as gears and linkages.

Interdependent is the term used to describe a group of components that are connected or dependent on one another in some way. If one component fails, the system will most likely fail completely or will no longer operate properly.

So, if a mechanism requires numerous parts to work together in order to operate properly, then the parts are said to be interdependent.

A machine is a type of mechanism. It is made up of interrelated parts that work together to perform a specific task.

Machines are used to accomplish a wide range of duties, from lifting and moving heavy objects to cutting and shaping materials. Machines have a variety of applications, and they are widely utilized in virtually every industry.

To know more about Mechanism refer here:

https://brainly.com/question/28258071#

#SPJ11

In order to prepare benzoic acid, the reactants that could be used are Na/NH2 and Reactant A Reactant B O3. In a chemical equation, a chemical reaction is described using chemical formulas and symbols.

Benzoic acid is a white crystalline powder that is somewhat soluble in water. It has a mild, sweet odor and a sour, astringent flavor. It is an organic acid that occurs naturally in several plants and animals' tissues. Benzoic acid is a colorless crystalline solid that is an important precursor for the synthesis of many other organic compounds.

Benzoic acid can be prepared by reacting a Grignard reagent with carbon dioxide, reducing the resulting carboxylic acid, or from toluene using the Perkin reaction. The reactants that could be used to prepare benzoic acid are: Na/NH2Reactant A Reactant B O3. The chemical equation for the preparation of benzoic acid from Na/NH2 is:

C6H5NO2 + 3H2 => C6H5COOH + 2NH3

The chemical equation for the preparation of benzoic acid from Reactant A Reactant B O3 is:

C6H5CH3 + 2O3 => C6H5COOH + H2O + O2

More on benzoic acid: https://brainly.com/question/31109708

#SPJ11

An experiment that could be performed, using these three solutions and any two of the indicators used in this experiment; not including the Universal Indicator

That would allow you to correctly relabel the pipets is as follows: Beral pipets are thin glass tubes with a short stem that is used for precise liquid transfer. To relabel the pipets, one can perform an experiment.                               The experiment involves the use of the two indicators other than the Universal Indicator. In this case, we can use Bromothymol blue (BTB) and Phenolphthalein indicators. BTB indicator turns yellow in acidic solutions, and blue in basic solutions.

Phenolphthalein turns pink in basic solutions and is colourless in acidic solutions.Experiment:

Pour small amounts of each of the solutions into separate test tubes.

Add one of the indicators, BTB into one of the test tubes and Phenolphthalein into another test tube. Note down the color changes and the pH values.

Compare the color change of the unknown sample with the two solutions. For example, if the unknown sample turns yellow with BTB and colorless with Phenolphthalein, then the unknown solution must be acidic. Similarly, if the unknown sample turns blue with BTB and pink with Phenolphthalein, then the unknown solution must be basic.The pH range for which an indicator would be required to make certain of the identifications is as follows: To be certain about the identification of an unknown sample, the pH range for which an indicator would be required would be from pH 5 to 9. In this range, some solutions can have the same pH value. For example, NaOH, Na2CO3, and NaHCO3 solutions all have a pH value of 8 to 9. Therefore, an universal indicator that would allow you to correctly relabel the pipets is as follows:Beral pipets are thin glass tubes with a short stem that is used for precise liquid transfer. would be required to make certain of the identifications in this range.

Learn more about Universal indicator here, https://brainly.com/question/31008951

#SPJ11

Answer:

H2O (2x1.008 + 1x15.999) = 18.015 g/mol

CO2 (1x12.011 + 2x15.999) = 44.01 g/mol

BF3 (1x10.81 + 3x18.998) = 67.81 g/mol

K2O (2x39.098 + 1x15.999) = 94.20 g/mol

BaCO3 (1x137.33 + 1x12.011 + 3x15.999) = 197.34 g/mol

The molality of dichloromethane in this solution is 6.12 m

The molality of dichloromethane in a solution of dichloromethane and 2-hexanone is calculated using the formula:

molality (m) = moles of solute (mol) / kilograms of solvent (kg)

In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-hexanone (CH₃COC₄H₉). The mole fraction of dichloromethane is 0.380, so there are 0.380 moles of dichloromethane in one mole of the solution.

To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-hexanone (CH₃COC₄H₉), is the sum of the atomic weights of each element, which is 100.161 g/mol. One mole of the solution contains 0.380 moles of dichloromethane and 0.620 moles 2-hexanone. Therefore, the mass of 2-hexanone is:

mass = moles x molar mass = 0.620 moles x 100.161 g/mol = 62.09982 g

Solving for the molality, we get:

m = 0.380 moles / (62.09982 g)(1 kg/1000g)

m = 6.25 mol/kg = 6.12 m

Learn more about molality here: brainly.com/question/24065939.

#SPJ11

The reaction here can be followed by finding an alternative method of calculating the amount of oxygen released during the catalase and hydrogen peroxide reaction.

A chemical reaction is the transformation of one or more chemicals, known as reactants, into one or more new compounds, known as products. Chemical components or compounds make up substances.

The breakdown of hydrogen peroxide into oxygen and water is accelerated by catalase.

Studying the catalase reaction is possible with an increase in oxygen concentration.

Read more on chemical reactions here:https://brainly.com/question/11231920

#SPJ1

Answer: The reason a diazonium group on a benzene ring cannot be used to direct an incoming substituent to the meta position is due to the fact that diazonium groups are highly reactive and unstable. When they are present on the benzene ring, they tend to undergo rapid chemical reactions, which cause them to be quickly removed from the ring.

This means that they cannot effectively direct incoming substituents to the meta position, as they are not present long enough to exert a significant effect on the reaction. Additionally, the highly reactive nature of diazonium groups makes them prone to react with other reagents in the reaction, which can cause unwanted side reactions and limit the efficiency of the overall reaction.

In conclusion, a diazonium group on a benzene ring cannot be used to direct an incoming substituent to the meta position due to their highly reactive and unstable nature, which causes them to undergo rapid chemical reactions and limits their ability to effectively direct the reaction.

Learn more about diazonium group here:

https://brainly.com/question/29357767#




#SPJ11

The symbol for the oxygen isotope with 9 neutrons is O-16.

The atomic number of oxygen is 8, which means it has 8 protons. The mass number for oxygen-16 is 16, which refers to the total number of particles in the nucleus (8 protons + 8 neutrons). The element symbol for oxygen is O.

Isotopes are atoms that have the same number of protons but different numbers of neutrons.

Oxygen-16 has a total of 9 neutrons, meaning it has one more neutron than the most common isotope of oxygen (oxygen-15, with 8 neutrons).

Due to the difference in neutron numbers, the atomic mass of oxygen-16 is slightly larger than oxygen-15.

Atomic mass is the combined mass of all of the protons and neutrons in an atom's nucleus. In oxygen-16, the protons and neutrons have a combined mass of 16, hence the mass number of 16.

Oxygen-16 is an important isotope because it is present in significant amounts in the Earth's atmosphere and is used in numerous medical and scientific applications.

to know more about isotope refer here:

https://brainly.com/question/11680817#

#SPJ11

The element with an atomic number of 11 that gets its symbol from the Latin word "natrium" is Sodium. Its symbol is "Na".

The symbol for sodium is Na, which is derived from the Latin word natrium. Sodium is a soft, silvery-white, highly reactive metal that is a member of the alkali metal group. It is an important element for many biological processes and is commonly found in salt (sodium chloride).

The other elements listed in the question are chlorine, iron, and nitrogen. Chlorine has an atomic number of 17, iron has an atomic number of 26, and nitrogen has an atomic number of 7. None of these elements gets their symbol from the Latin word natrium.

For more question on atomic number click on

https://brainly.com/question/11353462

#SPJ11

Probable question would be

with an atomic number of 11, which of these elements gets its symbol from the latin word natrium?

Sodium

Chlorine

Iron

Nitrogen

To prepare a buffer with a pH of 4.00, the volume ratio of 0.110 M HCOONa to 0.125 M HCOOH is 1:1.

A buffer solution is a solution that resists changes in pH when small amounts of acid or base are added to it. The pH of the buffer solution changes minimally when a small amount of strong acid or strong base is added to it.

To prepare a buffer solution, one should mix an acidic solution with a basic solution. The solution would be acidic or basic if only an acidic or basic solution is used, respectively.

To make a buffer solution with a desired pH, the acidic and basic solutions should be mixed in the correct proportion. To prepare a buffer solution with a pH of 4.00, the volume ratio of 0.110 M HCOONa to 0.125 M HCOOH is 1:1.

The Henderson-Hasselbalch equation can be used to determine the required amount of weak acid and salt (or weak base and salt) for a buffer solution.

C1 and C2 are the concentrations of solution 1 and solution 2, respectively.[A⁻] and [HA] are the molarities of the anion and acid in the solution, respectively. C1 = 0.110 M, C2 = 0.125 M

[A⁻] = 0.110 M, [HA] = 0.125 M(1 / V2) = (0.125 / 0.110)(0.110 / 0.125)

V2 / V1 = 1 / ((0.125 / 0.110)(0.110 / 0.125))

V2 / V1 = 1 / 1

V2 / V1 = 1:1

Therefore, the volume ratio of 0.110 M HCOONa to 0.125 M HCOOH required to prepare a buffer solution with a pH of 4.00 is 1:1.

Read more about the solution here:

https://brainly.com/question/30665317

#SPJ11

The percent ionization of a solution having a pH of 4.35 and an initial weak acid concentration of 0.00019 is 0.00021%.

To calculate this, first calculate the [H3O+] concentration.

This can be done by taking 10 raised to the power of the pH value, which in this case is 10^-4.35 = 3.2x10^-5 M.

Then, calculate the ionization fraction (alpha) using the equation alpha = [H3O+]/[HA], where [HA] is the initial weak acid concentration. In this case, alpha = 3.2x10^-5/0.00019 = 0.00021.

Finally, convert the ionization fraction to percent ionization using the equation Percent Ionization = 100 * alpha.

Thus, the percent ionization of the given solution is 0.00021 * 100 = 0.021%.

To know more about ionization, refer here:

https://brainly.com/question/14225136#

SPJ11

The element with the highest second ionization energy is Cesium (Cs). Its second ionization energy is 35.116 eV.
The other elements you listed, Gallium (Ga), Potassium (K), and Calcium (Ca) have second ionization energies of 9.8201 eV, 4.3407 eV, and  11.8138 eV respectively.

The element with the highest second ionization energy is Cesium (Cs).

Second ionization energy: The energy required to remove the second electron from the same atom, after one has already been removed, is called the second ionization energy. The second ionization energy of an element is generally greater than its first ionization energy, and it becomes more difficult to remove the second electron from the atom as the atomic number increases, as the nuclear charge increases and the electrons are held more tightly.

The formula for the second ionization energy is given as follows: M(g) → M+(g) + e−. For the above equation, the second ionization energy is defined as the energy required to remove one electron from an atom in the gas phase that has been ionized once.

Ionization energies of Gallium (Ga), Potassium (K), Calcium (Ca), and Cesium (Cs):

Thus, it can be concluded that the element with the highest second ionization energy is Cesium (Cs).

For more questions related to ionization energy.

https://brainly.com/question/28385102

#SPJ11

To demonstrate the formation of 3-methoxyheptane through an SN2 mechanism, follow these steps:

1. Identify the nucleophile and electrophile: The nucleophile is the methoxide ion (CH3O-) and the electrophile is the alkyl halide, such as 1-chloroheptane (C7H15Cl).

2. Show the electron flow using curved arrows: Draw a curved arrow from the lone pair on the oxygen atom of the methoxide ion to the carbon atom bonded to the chlorine in 1-chloroheptane. This arrow represents the nucleophilic attack.

3. Show the leaving group departure: Draw another curved arrow from the carbon-chlorine bond in 1-chloroheptane to the chlorine atom. This arrow represents the departure of the chloride ion (Cl-) as the leaving group.

4. Draw the final product with the correct stereochemistry: As SN2 reactions lead to inversion of stereochemistry, if the starting 1-chloroheptane had an R configuration, the final product, 3-methoxyheptane, would have an S configuration (and vice versa). So, draw the final product with the methoxy group (OCH3) attached to the third carbon atom of the heptane chain, and the correct stereochemistry based on the starting material.

The resulting structure will be 3-methoxyheptane, with the appropriate stereochemistry.

Atoms of a substance gain kinetic energy, when thermal energy is applied to it. Therefore, option B is correct.

When thermal energy is applied to a molecule, it increases the kinetic energy of the molecule. Thermal energy refers to the total energy associated with the random motion of particles within a substance.

The relationship between temperature and the average kinetic energy of a molecule is described by the kinetic theory of gases.

As thermal energy is added to a system, the average kinetic energy of the molecules increases. This happens because the energy is transferred to the molecules through collisions between them. Therefore, option B (atoms gain kinetic energy) is correct.

Learn more about thermal energy, here:

https://brainly.com/question/3022807

#SPJ6

1. The concentration of the hydronium ion, [H₃O⁺] is 3.02×10⁻¹⁰ M

2. The concentration of the hydroxide ion, [OH⁻] is 3.31×10⁻⁵ M

The concentration of the hydronium ion, [H₃O⁺], can be obtained as follow:

pH of a solution is given by the following formula:

pH = -Log [H₃O⁺]

Inputting the various parameters, we have

9.52 = -Log [H₃O⁺]

Multiply through by -1

-9.52 = Log [H₃O⁺]

Take the anti-log of -9.52

[H₃O⁺] = Anti-log -9.52

[H₃O⁺] = 3.02×10⁻¹⁰ M

The value of the the hydroxide ion, [OH⁻], can be obtained as follow:

[H₃O⁺] × [OH⁻] = 10¯¹⁴

3.02×10⁻¹⁰ × [OH⁻] = 10¯¹⁴

Divide both side by 3.02×10⁻¹⁰

[OH⁻] = 10¯¹⁴ / 3.02×10⁻¹⁰

[OH⁻] = 3.31×10⁻⁵ M

Learn more about hydroxide ion concentration, [OH⁻]:

https://brainly.com/question/19800885

#SPJ1

Answer: The hydroxyproline residue in collagen contributes to the stability of the collagen triple helix by forming hydrogen bonds, which is responsible for the unique mechanical properties of collagen.

To understand why hyp-containing collagen molecules have greater stability, a group of investigators conducted an investigation. Hyp stands for hydroxyproline, which is an important component of collagen.

Collagen is a protein that provides structure to the skin, bones, and other tissues. Collagen molecules with hyp are more stable due to the presence of hydrogen bonds. Hydrogen bonding is a type of chemical bond that occurs when a hydrogen atom in one molecule is attracted to an electronegative atom, such as oxygen or nitrogen, in another molecule.

Hydroxyproline, also known as Hyp, is an important component of collagen. The additional oxygen and hydrogen atoms in the hyp-containing collagen molecules improve the molecule's stability. The hydroxyproline residue in collagen contributes to the stability of the collagen triple helix by forming hydrogen bonds, which is responsible for the unique mechanical properties of collagen.



Learn more about collagen here:

https://brainly.com/question/30244632#



#SPJ11

When 15 L of a gas is heated from 10°C to 50°C The final volume of the gas is 17.16 L.

We have 15 L of gas which is initially at 10°C, heated to 50°C at constant pressure.

In this problem, we have to use Charles’ law:

[tex]V_1/T_1 = V_2/T_2[/tex]

This formula is used when pressure remains constant.

To apply this formula, we have to convert the temperature to the absolute temperature scale by adding 273 K to the initial and final temperatures.

Here,

[tex]V_1[/tex] = 15 L (Initial Volume)

[tex]V_2[/tex] = ? (Final Volume)

[tex]T_1[/tex]= 10°C + 273 K = 283 K (Initial Temperature)

[tex]T_2[/tex] = 50°C + 273 K = 323 K (Final Temperature)

Using Charles’ law,

[tex]V_1/T_1 = V_2/T_2[/tex]

=> 15/283 = [tex]V_2[/tex]/323

=> [tex]V_2[/tex] = 15×323/283 = 17.16 L (Final Volume)

Hence, the final volume of the gas is 17.16 L.

To learn more about the volume of a gas refer - https://brainly.com/question/25620749

#SPJ11

When 7.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq), the pH of the solution decreases by 0.24.

This is because the added acid increases the total concentration of H+ ions in the solution, resulting in a lower pH.

When 7.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq),

the change in pH will depend on the relative amounts of acid and base present in the buffer solution.

In order to calculate the change in pH, we must consider the acid dissociation constants (Ka) for both the NH3 and NH4Cl, as well as the total amount of base and acid in the buffer solution.

The Ka value for NH3 is 1.8 x 10^-5, and the Ka value for NH4Cl is 5.6 x 10^-10.

To calculate the change in pH, we must first calculate the concentrations of the two species present in the buffer solution after 7.00 mL of 0.100 M HCl is added.

The total volume of the solution after the addition of the acid is 107.00 mL. This means that the NH3 concentration is 0.093 M and the NH4Cl concentration is 0.093 M.

Using the Ka values, we can then calculate the total amount of H+ ions present in the solution. This is equal to (1.8 x 10^-5)x(0.093) + (5.6 x 10^-10)x(0.093) = 1.71 x 10^-5.

Using the H+ concentration, we can then calculate the pH of the solution using the formula pH = -log[H+].

In this case, the pH of the solution is equal to 4.76. This means that the change in pH is equal to -0.24, as the original pH of the buffer solution was 5.00.

To know more about buffer solution refer here:

https://brainly.com/question/24262133#

#SPJ11

The flow of energy during a chemical reaction involves the absorption of energy to break initial bonds, followed by the release of energy during bond formation. The net energy change, or enthalpy change, determines whether the reaction is exothermic or endothermic.

When bonds are broken and formed in a chemical reaction, energy is involved in this process. The flow of energy that takes place when bonds are broken and formed in a chemical reaction is called energy transfer. The transfer of energy takes place from one molecule to another molecule.

Hence, the term transfer of energy is used to describe the flow of energy that takes place in this process.

According to the law of conservation of energy, energy cannot be created nor destroyed, but it can be transformed from one form to another. Therefore, when a bond is broken, energy is absorbed or gained by the molecule, and when a bond is formed, energy is released or lost by the molecule.

Thus, in a chemical reaction, when a bond is broken, energy is absorbed by the molecule, and when a bond is formed, energy is released by the molecule. The energy released during a chemical reaction is called exothermic, and the energy absorbed during a chemical reaction is called endothermic.

To learn more about energy change refer: https://brainly.com/question/26176140

#SPJ11

Boric acid ([tex]H_{3}BO_{3}[/tex]) is a weak acid as the pKa > 2 and dissociation constant Ka ≈ 6.25 × 10^-15.

To determine the dissociation constant (Ka), we can use the information given in the problem.
1. Since the solution has a neutral pH of 7, the concentration of [tex]H+[/tex] ions is equal to 10^-7 M.
2. The concentration of undissociated [tex]H_{3}BO_{3}[/tex] is given as 16 mmol m-3, which is equal to 0.016 M.
3. Since [tex]H_{3}BO_{3}[/tex] dissociates into H+ and [tex]H_{3}BO_{3}-[/tex], we know that the concentration of [tex]H_{3}BO_{3}-[/tex] is also equal to the concentration of [tex]H+[/tex] ions, which is 10^-7 M.
4. Now, we can use the equilibrium expression for the dissociation of [tex]H_{3}BO_{3}[/tex] to find Ka:
Ka = [[tex]H+[/tex]][[tex]H_{3}BO_{3}-[/tex]] / [[tex]H_{3}BO_{3}[/tex]] = (10^-7)(10^-7) / 0.016
5. Calculate dissociation constant: Ka ≈ 6.25 × 10^-15
6. Determine pKa: pKa = -log(Ka) ≈ 14.2

Since pKa > 2, Boric acid is a weak acid.

To learn more about dissociation constant; https://brainly.com/question/3006391

#SPJ11

The correct answer is D. Reactants are substances that are combined to form products in a chemical reaction. Products are the result of substances being combined in a chemical reaction.

520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure. while assuming ideal behavior.

To make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure, the volume of HCl gas needed is 520.67 L.

Assuming ideal behavior,

Molarity (M) = number of moles of solute/volume of solution in liters (L)

Given:

Molarity (M) = 11.6 mol/L

Volume of solution (V) = ?

Temperature (T) = 25°C

Pressure (P) = 1 atm

We can use the ideal gas law to find the volume of HCl gas required to make 1 L of concentrated HCl. Then, we can use this value to find the volume of HCl gas required to make a certain volume of concentrated HCl. The ideal gas law is given as:

PV = nRT

where: P is pressure, V is volume of the gas, n is the number of moles of gas, R is the gas constant, T is the temperature. We can rearrange the ideal gas law to solve for volume:

V = nRT/PAt

standard temperature and pressure (STP), 1 mole of an ideal gas occupies 22.4 L.

Therefore, the number of moles of HCl gas required to make 1 L of concentrated HCl is given as:

11.6 mol/L × 1 L = 11.6 moles

We can substitute these values into the ideal gas law equation and solve for the volume of HCl gas required to make 1 L of concentrated HCl:

V = nRT/PV = (11.6 mol) × (0.08206 L·atm/K·mol) × (298 K)/(1 atm)V

= 260.51 L

However, we are interested in finding the volume of HCl gas required to make a certain volume of concentrated HCl. We can use the following conversion factor to find the volume of HCl gas required:

1 L concentrated HCl = 260.51 L HCl gas

We can use dimensional analysis to solve for the volume of HCl gas required to make 1 L of concentrated HCl:

11.6 mol/L × 1 L concentrated HCl × (260.51 L HCl gas/1 L concentrated HCl) = 3020.37 L HCl gas

However, this calculation gives the volume of HCl gas required to make 1 L of concentrated HCl.

We are interested in finding the volume of HCl gas required to make a certain amount of concentrated HCl.

We can use the following formula to solve for the volume of HCl gas required to make a certain amount of concentrated HCl:

V2 = V1 × (M1/M2)

where:V1 is the volume of concentrated HCl needed

M1 is the molarity of concentrated HCl

M2 is the molarity of the HCl gas

V2 is the volume of HCl gas needed

We can substitute the given values into the formula and solve for

V2:V2 = (1 L) × (11.6 mol/L)/(0.08206 L·atm/K·mol × 298 K)V2

= 520.67 L

Therefore, 520.67 liters of HCl gas are required to make concentrated hydrochloric acid (11.6 mol/L) at 25°C and 1 atm pressure.

For more such questions on ideal behavior , Visit:

https://brainly.com/question/28302575

#SPJ11