Convert the following polar equation to a cartesian equation.
r^2 sin 20 = 0.4

The sum of the series 6-2 + 1²/23 - 1²/14 is approximately 3.9708. Since the sum of the terms approaches a finite value (3.9708), we can conclude that the series is convergent.

To determine the convergence of the series 6-2 + 1²/23 - 1²/14, we need to evaluate the sum of the terms and check if it approaches a finite value as we consider more terms.

Let's simplify the series step by step:

=6 - 2 + 1²/23 - 1²/14

= 6 - 2 + 1/23 - 1/14 (simplifying the squares)

= 6 - 2 + 1/23 - 1/14

Now, let's calculate the sum of these terms:

= 4 + 1/23 - 1/14

To combine the fractions, we need to find a common denominator. The common denominator for 23 and 14 is 322. Let's rewrite the terms with the common denominator:

= (4 * 322) / 322 + (1 * 14) / (14 * 23) - (1 * 23) / (14 * 23)

= 1288/322 + 14/322 - 23/322

= (1288 + 14 - 23) / 322

= 1279/322

= 3.9708

Therefore, the sum of the series 6-2 + 1²/23 - 1²/14 is approximately 3.9708.

Since the sum of the terms approaches a finite value (3.9708), we can conclude that the series is convergent.

To learn more about convergent visit:

brainly.com/question/15415793

#SPJ11

The solution to the system dx/dt = -10x - 4y - 2 and dy/dt = 4x + 2y with initial condition x(0) = 1, y(0) = -3 is an ellipse with clockwise orientation.

To solve the system, we can rewrite it in matrix form as dX/dt = AX, where X = [x, y] and A is the coefficient matrix [-10 -4; 4 2].

Next, we find the eigenvalues and eigenvectors of matrix A. Solving for the eigenvalues λ, we have det(A - λI) = 0, where I is the identity matrix. This gives us the characteristic equation (-10 - λ)(2 - λ) - (-4)(4) = 0, which simplifies to λ^2 - 8λ - 16 = 0. Solving this quadratic equation, we find λ = 4 ± √32.

For each eigenvalue, we find the corresponding eigenvector by solving the system (A - λI)v = 0. The eigenvectors are [1, -2] for λ = 4 + √32 and [1, -2] for λ = 4 - √32.

The general solution is X(t) = c₁e^(λ₁t)v₁ + c₂e^(λ₂t)v₂, where c₁ and c₂ are constants. Substituting the values, we have X(t) = c₁e^((4+√32)t)[1, -2] + c₂e^((4-√32)t)[1, -2].

The trajectory of the solution represents an ellipse with clockwise orientation due to the presence of complex eigenvalues (λ = 4 ± √32). The eigenvectors determine the directions of the axes of the ellipse. Therefore, the solution exhibits an elliptical motion in the x-y plane.

To learn more about matrix click here

brainly.com/question/29132693

#SPJ11

Option B.) RT = 5, ST = √2, RS = √27, is the correct lengths of the sides.

Here, we have,

given that,

RST is a right angle triangle.

so, we know that,

the lengths of the sides will follow the Pythagorean theorem:

Pythagorean theorem, the well-known geometric theorem that the sum of the squares on the legs of a right triangle is equal to the square on the hypotenuse (the side opposite the right angle)—or, in familiar algebraic notation, a² + b² = c².

so, from the given options, we get,

option B.)

RT = 5, ST = √2, RS = √27

because, applying Pythagorean theorem we get,

5² + √2²

=25 + 2

=27

= √27²

Hence, Option B.) RT = 5, ST = √2, RS = √27, is the correct lengths of the sides.

To learn more on Pythagorean theorem click:

brainly.com/question/24302120

#SPJ1

The horizontal component of the velocity is approximately 17.47 m/s, and the vertical component is approximately 118.89 m/s.

To determine the vertical and horizontal vector components of the velocity of the rocket, we can use trigonometry.

Given that the rocket is propelled at an initial velocity of 120 m/s at 85° from the horizontal, we can consider the horizontal component as the adjacent side of a right triangle and the vertical component as the opposite side.

To find the horizontal component, we use the cosine function:

Horizontal component = velocity * cos(angle)

= 120 m/s * cos(85°)

To find the vertical component, we use the sine function:

Vertical component = velocity * sin(angle)

= 120 m/s * sin(85°)

Evaluating these expressions:

Horizontal component ≈ 120 m/s * cos(85°) ≈ 17.47 m/s

Vertical component ≈ 120 m/s * sin(85°) ≈ 118.89 m/s

Therefore, the horizontal component is 17.47 m/s, and the vertical component is 118.89 m/s.

To know more about horizontal component refer here:

https://brainly.com/question/27998630

#SPJ11

None of the options match with the correct answer thus, the slope of the curve is y = (-sin(7) / 64)(x - 1) + 7.

To find the slope of the curve and the line that is normal to the curve at the point (1, 7) for the equation 5x^2y - cos(y) = 6x, we need to calculate the derivatives and evaluate them at that point.

First, let's find the derivative of the equation with respect to x:

d/dx(5x^2y - cos(y)) = d/dx(6x)

10xy - (-sin(y) * dy/dx) = 6

Next, let's find the derivative of y with respect to x, which represents the slope of the curve:

dy/dx = (10xy - 6) / sin(y)

To find the slope at the point (1, 7), we substitute x = 1 and y = 7 into the derivative:

dy/dx = (10 * 1 * 7 - 6) / sin(7)

      = (70 - 6) / sin(7)

      = 64 / sin(7)

Now, let's find the equation of the line that is normal to the curve at the point (1, 7). The normal line will have a slope that is the negative reciprocal of the slope of the curve at that point.

The slope of the normal line is given by:

m_normal = -1 / dy/dx

m_normal = -1 / (64 / sin(7))

        = -sin(7) / 64

Now we have the slope of the line that is normal to the curve at (1, 7). Let's find the equation of the line using the point-slope form.

Using the point-slope form: y - y1 = m(x - x1), where (x1, y1) is the point (1, 7):

y - 7 = (-sin(7) / 64)(x - 1)

Rearranging the equation:

y = (-sin(7) / 64)(x - 1) + 7

Therefore, the line that is normal to the curve at the point (1, 7) is given by the equation:

y = (-sin(7) / 64)(x - 1) + 7

None of the options provided (A, B, C, D) match this equation, so the correct option is not among the choices given.

To know more about slope of the curve, visit:

https://brainly.com/question/32544574#

#SPJ11

The rate of change of the area of the rectangle is 18 square meters per hour.

In this problem we must compute the rate of change of the area of a rectangle, whose area formula is shown below:

A = w · h

Where:

Now we find the rate of change of the area of the rectangle:

A' = w' · h + w · h'

(w = 40 m, h = 10 m, w' = 1 m / h, h' = 0.2 m / h)

A' = (1 m / h) · (10 m) + (40 m) · (0.2 m / h)

A' = 10 m² / h + 8 m² / h

A' = 18 m² / h

The statement is incomplete, complete text is presented below:

Find the rate of change of an area of a rectangle when the sides are 40 meters and 10 meters. If the length of the first side is decreasing at a rate of 1 meter per hour and the second side is decreasing at a rate of 1 / 5 meters per hour.

To learn more on rates of change: https://brainly.com/question/21654530

#SPJ4

To find the derivative of the function h(x) = log2(1093^(√(x-3))) - 3^9, we can use the chain rule and the power rule of differentiation.

First, let's differentiate each term separately.

For the first term, log2(1093^(√(x-3))), we have a composition of functions. Let's denote the inner function as u = 1093^(√(x-3)). Applying the chain rule, we have:

d(u)/dx = (√(x-3)) * (1093^(√(x-3)))'   (differentiating the base with respect to x)

        = (√(x-3)) * (1093^(√(x-3))) * (√(x-3))'   (applying the power rule and chain rule)

        = (√(x-3)) * (1093^(√(x-3))) * (1/2√(x-3))   (simplifying the derivative)

Now, for the second term, -3^9, the derivative is simply 0 since it is a constant.

Combining the derivatives of both terms, we have:

h'(x) = (1/u) * d(u)/dx - 0

     = (1/u) * [(√(x-3)) * (1093^(√(x-3))) * (1/2√(x-3))]

Simplifying further, we can express the derivative as:

h'(x) = (1093^(√(x-3)) / (2(x-3))

To learn more about Derivative - brainly.com/question/29144258

#SPJ11

Step-by-step explanation:

Find the distance from the center to the point....this is the radius

               radius = sqrt 34

diameter = 2 x radius = 2 sqrt 34

circumference = pi * diameter =

                             pi * 2 sqrt (34) = 36.6 units

Riemann sum is an estimation of an area below or above a curve, which is approximated by rectangles.

Let us consider the following limit of Riemann sums of a function f on [a, b]:

n ×7 lim 2 (xx)'Axxi [4,6] A+0k=1

In order to identify f and express the limit as a definite integral,

let us start by defining the interval [4, 6].

Here, the first term of the Riemann sum, x1, will be equal to 4, and the nth term, xn, will be equal to 6.

We also know that the Riemann sum is the sum of areas of the rectangles whose heights are determined by the function f, and whose bases are determined by the interval [4, 6].

Therefore, the width of each rectangle, Δx, will be (6 - 4)/n or 2/n.

To express the limit as a definite integral,

let us write the Riemann sum as follows:

$$\lim_{n\to\infty}\sum_{k=1}^n 2\cdot f\left(4+k\cdot\frac{2}{n}\right)\cdot\frac{2}{n}$$The limit of this sum is the definite integral of the function f over the interval [4, 6].

Therefore, we can write the limit as follows:

$$\int_{4}^{6}f(x)\,dx$$Therefore, the function f is the function whose limit, as the number of rectangles approaches infinity, is the definite integral of f over [4, 6].

To know more about curve

https://brainly.com/question/30452445

#SPJ11

To evaluate the double integral ∫∫RxydA over the square region R, we can use a change of variables and an appropriate transformation. By using a transformation that maps the square region R to a simpler domain, such as the unit square, we can simplify the integration process.

The given region R is a square with vertices (0, 0), (1, 1), (2, 0), and (1, -1). To simplify the integration, we can use a change of variables and transform the square region R into the unit square [0, 1] × [0, 1] by using the transformation u = x - y and v = x + y.

The inverse transformation is given by x = (u + v)/2 and y = (v - u)/2. The Jacobian determinant of this transformation is |J| = 1/2.

Now, we can express the original integral in terms of the new variables u and v:

∫∫R xy dA = ∫∫R (x^2 - y^2) (x)(y) dA.

Substituting the transformed variables, we have:

∫∫R xy dA = ∫∫S (u + v)^2 (v - u)^2 (1/2) dudv,

where S is the unit square [0, 1] × [0, 1].

The integral over the unit square S simplifies to:

∫∫S (u + v)^2 (v - u)^2 (1/2) dudv = (1/2) ∫∫S (u^2 + 2uv + v^2)(v^2 - 2uv + u^2) dudv.

Expanding the expression, we get:

∫∫S (u^4 - 4u^2v^2 + v^4) dudv.

Integrating term by term, we have:

(1/5) (u^5 - (4/3)u^3v^2 + (1/5)v^5) evaluated over the limits of the unit square [0, 1] × [0, 1].

Evaluating this expression, we find the result of the double integral over the square region R.

Learn more about Jacobian determinant here:

https://brainly.com/question/32227915

#SPJ11

4) Two techniques commonly used to algebraically solve limits are factoring and using conjugates.

The limit lim(x→1) (2x^3 - x^2 - x + 1) is computed using factoring.

The limit lim(x→4) (x^4 - x^-4) is computed using conjugates.

The requested information for question 7 is missing.

4) Two common techniques used to algebraically solve limits are factoring and using conjugates. Factoring involves manipulating the algebraic expression to simplify it and cancel out common factors, which can help in evaluating the limit. Using conjugates is another technique where the numerator or denominator is multiplied by its conjugate to eliminate radicals or complex numbers, facilitating the computation of the limit.

To compute the limit lim(x→1) (2x^3 - x^2 - x + 1) using factoring, we can factor the expression as (x - 1)(2x^2 + x - 1). Since the limit is evaluated as x approaches 1, we can substitute x = 1 into the factored form to find the limit. Thus, the result is (1 - 1)(2(1)^2 + 1 - 1) = 0.

To compute the limit lim(x→4) (x^4 - x^-4) using conjugates, we can multiply the numerator and denominator by the conjugate of x^4 - x^-4, which is x^4 + x^-4. This simplifies the expression as (x^8 - 1)/(x^4). Substituting x = 4 into the simplified expression gives us (4^8 - 1)/(4^4) = (65536 - 1)/256 = 25385/256.

The question is incomplete as it cuts off after mentioning "7) S." Please provide the full question for a complete answer.

Learn more about limit here:

https://brainly.com/question/12211820

#SPJ11

The equation of the line perpendicular to the function y= 3 + 702 +51 - 2 at x = 0? = O x + 5y + 10 = 0 10x + 5y - 2 = 0 is 3.0 + 5y + 7 = 0..

To find the equation of a line perpendicular to the given function y = 3x + 7 at x = 0, we first need to determine the slope of the given function. The given function is in the form y = mx + b, where m is the slope. In this case, the slope is 3.

For a line to be perpendicular to another line, their slopes must be negative reciprocals of each other. The negative reciprocal of 3 is -1/3.

Using the slope-intercept form, y = mx + b, we can write the equation of the line perpendicular to y = 3x + 7 as y = (-1/3)x + b.

To find the value of b, we substitute the point (x, y) = (0, 5) into the equation:

5 = (-1/3)(0) + b

5 = b

Therefore, the equation of the line perpendicular to y = 3x + 7 at x = 0 is y = (-1/3)x + 5.

Among the given choices, the equation that matches this result is 3.0 + 5y + 7 = 0.

Hence, the correct choice is 3.0 + 5y + 7 = 0.

Learn more about slope-intercept form here:

https://brainly.com/question/29146348

#SPJ11

The function provided for the sales of the compact disc player is given by f(x) = x² * 1000 - 800, where x represents the number of years the player has been on the market.

(a) To find the sales during a specific year, you need to substitute the value of x into the function. For example, to find the sales after 4 years, you would calculate f(4):

f(4) = 4² * 1000 - 800

= 16,000 - 800

= 15,200 units

So, the sales after 4 years would be 15,200 units.

(b) To determine the number of years it will take for sales to reach 400 units, you need to set the function equal to 400 and solve for x:

400 = x² * 1000 - 800

Rearranging the equation:

x² * 1000 = 400 + 800

x² * 1000 = 1200

Dividing both sides by 1000:

x² = 1.2

Taking the square root of both sides:

[tex]x = \sqrt{1.2}\\x = 1.095[/tex]

So, it will take approximately 1.095 years for sales to reach 400 units.

(c) To determine if sales will ever reach 1,000 units, we need to check if there exists a value of x for which f(x) equals 1,000:

f(x) = x² * 1000 - 800

Setting f(x) equal to 1,000:

1,000 = x² * 1000 - 800

Rearranging the equation:

x² * 1000 = 1,000 + 800

x² * 1000 = 1,800

Dividing both sides by 1000:

x² = 1.8

Taking the square root of both sides:

[tex]x = \sqrt{1.8}\\x = 1.341[/tex]

Therefore, sales will never reach 1,000 units.

(d) To determine if there is a limit on sales for this product, we need to analyze the behavior of the function as x approaches infinity. From the given function, we can observe that the term "x²" has a positive coefficient, indicating that sales will increase indefinitely as x increases.

Therefore, there is no limit on sales for this product.

To learn more about limit visit:

brainly.com/question/30089599

#SPJ11

The constant c can be any value for the function f to be continuous on (-infinity, infinity).

To determine the value of the constant c for which the function f(x) is continuous on the entire real number line, we need to ensure that the function is continuous at the point x = 3, where the definition changes.

For the function to be continuous at x = 3, the left-hand limit and the right-hand limit at this point must exist and be equal.

In this case, the left-hand limit as x approaches 3 is given by cx^2 + 8x, and the right-hand limit as x approaches 3 is given by cx. For the limits to be equal, the value of c does not matter because the limits involve different terms.

Therefore, any value of c will result in the function f(x) being continuous on (-infinity, infinity). The continuity of f(x) is not affected by the value of c in this particular case

Learn more about constant here:

https://brainly.com/question/31730278

#SPJ11

To find the length and direction of the cross product u × v, where u = -2i + 6j - 10k and v = -i + 3j - 5k, we can calculate the cross product and then determine its magnitude and direction.

The cross product u × v is given by the formula: u × v = |u| |v| sin(θ) n

where |u| and |v| are the magnitudes of u and v, respectively, θ is the angle between u and v, and n is the unit vector perpendicular to both u and v.

To calculate the cross product, we can use the determinant method:

u × v = (6 * (-5) - (-10) * 3)i + ((-2) * (-5) - (-10) * (-1))j + ((-2) * 3 - 6 * (-1))k

= (-30 + 30)i + (-10 + 10)j + (-6 - 6)k

= 0i + 0j + (-12)k

= -12k

Therefore, the cross product u × v simplifies to -12k.

Now, let's find the length of u × v:

|u × v| = |(-12)k|

= 12

So, the length of u × v is 12.

As for the direction, since the cross product u × v is a vector along the negative k-axis, its direction can be expressed as -k.

Therefore, the length of u × v is 12, and its direction is -k.

Learn more about magnitudes here:

https://brainly.com/question/14452091

#SPJ11

The standard deviation of the sampling distribution of the sample mean length is 0.1 minutes.

The standard deviation of the sampling distribution of the sample mean is determined by the population standard deviation (0.4 minutes) divided by the square root of the sample size (√16 = 4).

Therefore, the standard deviation of the sampling distribution of the sample mean length is 0.4 minutes / 4 = 0.1 minutes.

The sampling distribution of the sample mean represents the distribution of sample means taken from multiple samples of the same size from a population. As the sample size increases, the standard deviation of the sampling distribution decreases, resulting in a more precise estimate of the population mean.

In this case, since we have a sample size of 16, the standard deviation of the sampling distribution of the sample mean is 0.1 minutes.

Learn more about standard deviation here:

https://brainly.com/question/29115611

#SPJ11

To draw the projection of the solid bounded by the paraboloid z = 16 - 7x^2 - y^2 in the first octant onto the x-axis, y-axis, and z-axis, we can use mathematical applications like GeoGebra.

Using a mathematical application like GeoGebra, we can create a three-dimensional coordinate system and plot the points that satisfy the equation of the paraboloid. In this case, we will focus on the first octant, which means the x, y, and z values are all positive.

To draw the projection onto the x-axis, we can fix the y and z values to zero and plot the resulting points on the x-axis. This will give us a curve in the x-z plane that represents the intersection of the paraboloid with the x-axis. Similarly, for the projection onto the y-axis, we fix the x and z values to zero and plot the resulting points on the y-axis. This will give us a curve in the y-z plane that represents the intersection of the paraboloid with the y-axis.

Learn more about paraboloid here:

https://brainly.com/question/30634603

#SPJ11

For a two-factor independent-measures research study with 2 levels of factor A and 3 levels of factor B, a total of 6 separate samples or groups would be needed.

In a two-factor independent-measures research study, each combination of levels of the two factors (A and B) constitutes a separate condition or treatment group. In this case, there are 2 levels of factor A and 3 levels of factor B, resulting in 2 x 3 = 6 possible combinations of levels.

To obtain valid and independent measurements, each combination or condition should be represented by a separate sample or group. This means that for each combination of levels of factors A and B, we would need a distinct group of participants or subjects. Therefore, a total of 6 separate samples or groups would be needed to conduct the study.

Having separate samples for each combination of factor levels allows for the comparison of the effects of each factor independently as well as their interaction. By varying the levels of both factors and observing the responses in each group, researchers can assess the main effects of each factor and investigate any potential interaction effects between the two factors.

Learn more about combination here:

https://brainly.com/question/20211959

#SPJ11

a. Height of the plants grown in direct sunlight is (11.977, 13.023) inches. b. the 95% confidence interval for the sample mean height would have a similar interpretation but with a smaller margin of error. c. The width would likely be smaller than the one she constructed with 15 plants d 90% confidence interval would be narrower than a 95% confidence interval for the same data.

a. The 95% confidence interval for the sample mean height of the plants grown in direct sunlight is (11.977, 13.023) inches. This means that we are 95% confident that the true population mean height falls within this interval.

b. For the new experiment with 200 plants, the 95% confidence interval for the sample mean height would have a similar interpretation but with a smaller margin of error. The interval would provide an estimate of the true population mean height with 95% confidence.

c. The width of the 95% confidence interval she created with 200 plants would likely be smaller than the one she constructed with 15 plants. As the sample size increases, the standard error decreases, resulting in a narrower interval.

d. If she wished to construct a 90% confidence interval for this data, the interval would be smaller than the 95% confidence interval. A higher confidence level requires a wider interval to capture a greater range of possible values for the population mean. Therefore, a 90% confidence interval would be narrower than a 95% confidence interval for the same data.

Learn more about confidence interval

https://brainly.com/question/31472471

#SPJ11

The cost per day for each brand are: Brand A: $0.01161, Brand B: $0.01300, Brand C: $0.00931. The best value brand is Brand C.

To calculate the cost per day for each brand, we divide the cost by the number of days:

Cost per day for Brand A = Cost of Brand A bulb / Number of days for Brand A

Cost per day for Brand B = Cost of Brand B bulb / Number of days for Brand B

Cost per day for Brand C = Cost of Brand C bulb / Number of days for Brand C

To determine the best value brand, we compare the cost per day for each brand and select the brand with the lowest cost.

Let's assume the costs of the bulbs are as follows:

Cost of Brand A bulb = $6.50

Cost of Brand B bulb = $7.80

Cost of Brand C bulb = $5.40

Calculating the cost per day for each brand:

Cost per day for Brand A = $6.50 / 560

≈ $0.01161

Cost per day for Brand B = $7.80 / 600

≈ $0.01300

Cost per day for Brand C = $5.40 / 580

≈ $0.00931

Comparing the costs, we see that Brand C has the lowest cost per day. Therefore, Brand C provides the best value among the three brands.

Learn more about cost here:

https://brainly.com/question/29176074

#SPJ11

Rules used in the above solution are: Power Rule, Sum Rule, Constant Rule, and Subtraction Rule.

Given function: f(x) = 5x¹ - 6x² + 4x - 2We are supposed to find f'(x) and f'(2).f'(x) is the derivative of the function f(x). The derivative of any polynomial is found by differentiating each of its terms.

Now, let us find f'(x):f'(x) = d/dx (5x¹) - d/dx (6x²) + d/dx (4x) - d/dx (2)f'(x) = 5 - 12x + 4f'(x) = 9 - 12x

Now, we have f'(x) = 9 - 12x.

We have to find f'(2) which means we substitute x = 2 in f'(x):f'(2) = 9 - 12(2)f'(2) = 9 - 24f'(2) = -15

Therefore, the derivative of the given function is 9 - 12x and the value of f'(2) is -15. Rules used in the above solution are: Power Rule, Sum Rule, Constant Rule, and Subtraction Rule.

Learn more about power rule: https://brainly.com/question/29288036

#SPJ11

The given angle is 8° 55' 42". To convert this angle to decimal degrees, we need to convert the minutes and seconds to their decimal equivalents. The resulting angle will be in decimal degrees.

To convert the minutes and seconds to their decimal equivalents, we divide the minutes by 60 and the seconds by 3600, and then add these values to the degrees. In this case, we have:

8° + (55/60)° + (42/3600)°

Simplifying the fractions, we have:

8° + (11/12)° + (7/600)°

Combining the terms, we get:

8° + (11/12)° + (7/600)° = (8*12 + 11 + 7/600)° = (96 + 11 + 0.0117)° = 107.0117°

Therefore, the angle 8° 55' 42" is equivalent to 107.0117° in decimal degrees.

Learn more about angle here : brainly.com/question/31818999

#SPJ11

The partial derivatives of [tex]fx[/tex]= x / (√(x² + y²)) , [tex]fy[/tex] = y / (√(x² + y²)),

[tex]fx(4, 1)[/tex]= 4 / (√17) and [tex]fy(-1, -3)[/tex] =  -3 / (√10).

Let's calculate the partial derivatives of [tex]f(x, y)[/tex] = √(√(x² + y²)).

To find [tex]fx[/tex], we differentiate [tex]f(x, y)[/tex] with respect to x while treating y as a constant. Using the chain rule, we have:

[tex]fx[/tex] = (∂f/∂x) = (∂/∂x) √(√(x² + y²)).

Using the chain rule, we obtain:

[tex]fx[/tex] = (∂/∂x) (√(x² + y²))^(1/2).

Applying the power rule, we have:

[tex]fx[/tex] = (1/2) (√(x² + y²))^(-1/2) (2x).

Simplifying further, we get:

[tex]fx[/tex] = x / (√(x² + y²)).

Next, let's calculate [tex]fy[/tex] by differentiating [tex]f(x, y)[/tex] with respect to y while treating x as a constant.

Using the chain rule, we have:

[tex]fy[/tex] = (∂f/∂y) = (∂/∂y) √(√(x² + y²)).

Using the chain rule and the power rule, we obtain:

[tex]fy[/tex] = (1/2) (√(x² + y²))^(-1/2) (2y).

Simplifying, we get:

[tex]fy[/tex] = y / (√(x² + y²)).

To evaluate [tex]fx(4, 1)[/tex], we substitute x = 4 into the expression for [tex]fx[/tex]:

[tex]fx(4, 1)[/tex] = 4 / (√(4² + 1²)) = 4 / (√17).

To evaluate [tex]fx(4, 1)[/tex] we substitute y = -3 into the expression for [tex]fy[/tex]:

[tex]fy(-1, -3)[/tex]= -3 / (√((-1)² + (-3)²)) = -3 / (√10).

Therefore, the exact values are [tex]fx(4, 1)[/tex]= 4 / (√17) and [tex]fy(-1, -3)[/tex]= -3 / (√10).

learn more about derivative here:

https://brainly.com/question/29020856

#SPJ11

The f'(x) is f'(3) = 15.

To find f'(x) for the given function f(x) = 9x + x^2 - 6, we can follow the four-step process of differentiation.

Step 1: Identify the function f(x).

In this case, the function is f(x) = 9x + x^2 - 6.

Step 2: Use the power rule to differentiate each term.

The power rule states that the derivative of x^n, where n is a constant, is nx^(n-1).

Differentiating each term, we get:

f'(x) = d/dx (9x) + d/dx (x^2) - d/dx (6)

The derivative of 9x is simply 9.

For x^2, we apply the power rule. The derivative of x^2 is 2x^(2-1) = 2x.

The derivative of a constant term (-6) is zero.

Putting it all together, we have:

f'(x) = 9 + 2x - 0

f'(x) = 2x + 9

Step 3: Evaluate f'(x) at specific values.

To find f'(1), we substitute x = 1 into the derived expression:

f'(1) = 2(1) + 9

f'(1) = 2 + 9

f'(1) = 11

Therefore, f'(1) = 11.

Step 4: Find f(x) at specific values.

To find f(1), we substitute x = 1 into the original function:

f(1) = 9(1) + (1)^2 - 6

f(1) = 9 + 1 - 6

f(1) = 4

Therefore, f(1) = 4.

To find f'(2), we substitute x = 2 into the derived expression:

f'(2) = 2(2) + 9

f'(2) = 4 + 9

f'(2) = 13

Therefore, f'(2) = 13.

To find f'(3), we substitute x = 3 into the derived expression:

f'(3) = 2(3) + 9

f'(3) = 6 + 9

f'(3) = 15

For more such question on f'(x). visit :

https://brainly.com/question/30426475

#SPJ8

The general solution of the given differential equation is P = C sec(t) + 1/(4 tan(t)), where C is a constant.

To find the general solution of the differential equation, we need to solve for P. The given equation is P + P tan(t) = P⁴ sec(t) + t dP/dt.

First, we rearrange the equation to isolate the derivative term:

P⁴ sec(t) + t dP/dt = P + P tan(t)

Next, we separate variables by moving all terms involving P to one side and terms involving t and dP/dt to the other side:

P⁴ sec(t) - P = -P tan(t) - t dP/dt

Now, we can factor out P:

P(P³ sec(t) - 1) = -P tan(t) - t dP/dt

Dividing both sides by (P³ sec(t) - 1), we get:

P = (-P tan(t) - t dP/dt) / (P³ sec(t) - 1)

Simplifying further, we have:

P = -P tan(t) / (P³ sec(t) - 1) - t dP/dt / (P³ sec(t) - 1)

The term (-P tan(t) / (P³ sec(t) - 1)) can be rewritten as 1/(P³ sec(t) - 1) * (-P tan(t)). Integrating both sides with respect to P, we obtain:

∫(1/(P³ sec(t) - 1)) dP = ∫(-t/(P³ sec(t) - 1)) dt

Integrating these expressions leads to the general solution:

ln|P³ sec(t) - 1| = -ln|cos(t)| + C

Simplifying further, we get:

ln|P³ sec(t) - 1| + ln|cos(t)| = C

Combining the logarithms using properties of logarithms, we have:

ln|P³ sec(t) - 1 cos(t)| = C

Exponentiating both sides, we obtain

[tex]P³ sec(t) - 1 = e^Ccos(t)[/tex]

Finally, rearranging the equation yields the general solution:

[tex]P = (e^C cos(t) + 1)^(1/3)[/tex]

Letting C = ln|A|, where A is a positive constant, we can rewrite the solution as:

[tex]P = (A cos(t) + 1)^(1/3)[/tex]

learn more about Differential equations here:

https://brainly.com/question/25731911

#SPJ11

The rectangular form of the given parametric equations is x = 4 cos θ and y = 3 sin θ. The rectangular form of the given parametric equations x = 4 cos θ, y = 3 sin θ is obtained by expressing x and y in terms of a common variable, typically denoted as t.

The domain of the rectangular form is the same as the domain of the parameter θ, which is 1 € (0, 2π].

To convert the parametric equations x = 4 cos θ, y = 3 sin θ into rectangular form, we substitute the trigonometric functions with their corresponding expressions using the Pythagorean identity:

x = 4 cos θ

y = 3 sin θ

Using the Pythagorean identity: cos^2 θ + sin^2 θ = 1, we have:

x = 4(cos^2 θ)^(1/2)

y = 3(sin^2 θ)^(1/2)

Simplifying further:

x = 4(cos^2 θ)^(1/2) = 4(cos^2 θ)^(1/2) = 4(cos θ)

y = 3(sin^2 θ)^(1/2) = 3(sin^2 θ)^(1/2) = 3(sin θ)

Therefore, the rectangular form of the given parametric equations is x = 4 cos θ and y = 3 sin θ.

The domain of the rectangular form is the same as the domain of the parameter θ, which is 1 € (0, 2π].

Learn more about parametric equations here:

brainly.com/question/29275326

#SPJ11

If f is an odd function, f(-4) would be -10.

If f(x) is an even function, it means that f(-x) = f(x) for all x in the domain of f. Given that f(4) = 10, we can deduce that f(-4) must also be equal to 10. This is because the function f(x) will produce the same output for both x = 4 and x = -4 due to its even symmetry.

If f(x) is an odd function, it means that f(-x) = -f(x) for all x in the domain of f. Since f(4) = 10, we can conclude that f(-4) = -10. This is because the function f(x) will produce the negative of its output at x = 4 when evaluating it at x = -4, as dictated by the odd symmetry. Therefore, f(-4) would be -10 in this case.

For more information on solving functions visit: brainly.com/question/27848606