devise a 6-step synthesis of a carboxylic acid from ethyne using the reagents provided. ethyne is a carbon carbon triple bond, bonded to two hydrogens. three reagents convert this to the main intermediate, an alkene with three bonds to hydrogen and one bond to a propyl group. three more reagents convert this to the product, which is a carboxylic acid bonded to a four carbon chain. reagent 1 is: reagent 2 is: reagent 3 is: reagent 4 is: reagent 5 is: reagent 6 is:

Answers

Answer 1

To synthesize a carboxylic acid from ethyne using the reagents provided, follow these steps: Hydroboration-oxidation, Tautomerization, Nucleophilic addition, Oxidation and Oxidative cleavage.

Hydroboration-oxidation- Reagent 1: Diborane (B2H6); Reagent 2: Hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) Ethyne (C2H2) will undergo hydroboration-oxidation using diborane (B2H6) followed by treatment with hydrogen peroxide (H2O2) and sodium hydroxide (NaOH) to form an alkene (vinyl alcohol) with three bonds to hydrogen and one bond to a hydroxyl group.

Tautomerization- The vinyl alcohol formed in step 1 will undergo tautomerization (keto-enol equilibrium) to form an aldehyde with two carbons. Nucleophilic addition- Reagent 3: n-Propyl Grignard reagent (n-PrMgBr) Add the n-Propyl Grignard reagent (n-PrMgBr) to the aldehyde. This will result in a nucleophilic addition reaction, leading to the formation of a tertiary alcohol with a four-carbon chain.

Oxidation- Reagent 4: Chromic acid (H2CrO4), Oxidize the tertiary alcohol to a ketone using chromic acid (H2CrO4). This will form a ketone with a four-carbon chain. Oxidative cleavage- Reagent 5: Ozone (O3), Reagent 6: Zinc (Zn) and water (H2O), Perform an oxidative cleavage of the ketone using ozone (O3) followed by a reductive workup with zinc (Zn) and water (H2O). This will result in the formation of a carboxylic acid bonded to a four-carbon chain.

To know more about carboxylic acid, refer here:

https://brainly.com/question/29035899#

#SPJ11


Related Questions

i need this quickly.

Answers

The completed table of the isotopes of the given elements is found in the attachment.

What are isotopes?

Isotopes are variations of chemical elements that have a varying number of neutrons but the same number of protons and electrons. In other words, isotopes are different forms of the same element that have different amounts of nucleons (the sum of protons and neutrons) because of variations in the total number of neutrons in each of their individual nuclei.

For instance, the carbon atoms carbon-14, carbon-13, and carbon-12 all exist. A sum of 8 neutrons are present in carbon-14, 7 neutrons are present in carbon-13, and 6 neutrons are present in carbon-12.

Learn more about isotopes at: https://brainly.com/question/14220416

#SPJ1

The equilibrium constant for a reaction is greater than 1.0 at temperatures above 500 K but less than 1.0 at
temperatures below 500 K. What can be concluded about the values of AH and AS for the reaction? (Assume
that AH and AS are independent of temperature.)
(A) AH> 0 and AS > 0
(B) AH> 0 and AS < 0
(C) AH < 0 and AS > 0
(D) AH <0 and AS < 0

Answers

Answer:

(C) AH < 0 and AS > 0

When the equilibrium constant is greater than 1.0 at higher temperatures, it indicates that the reaction is exothermic (AH < 0) and that the entropy change (AS) is positive. At lower temperatures, the equilibrium constant is less than 1.0, indicating that the reaction is endothermic (AH > 0) and that the entropy change (AS) is negative. Therefore, the correct answer is (C) AH < 0 and AS > 0.

Based on the given information, we can conclude that AH <0 and AS > 0. Therefore, option C is correct.

What is equilibrium constant ?

The equilibrium constant (K) for a reaction can be expressed in terms of the standard free energy change (∆G°), standard enthalpy change (∆H°), and standard entropy change (∆S°) as follows:

K = e^(-∆G°/RT) = e^(-∆H°/RT) * e^(∆S°/R)

where R is the gas constant and T is the temperature in Kelvin.

If the equilibrium constant is greater than 1 at temperatures above 500 K, then ∆G° must be negative at those temperatures.

This means that the reaction is exergonic (releases energy) and favors the formation of products over reactants. Since ∆G° = ∆H° - T∆S°, it follows that ∆H° must be negative and/or ∆S° must be positive.

On the other hand, if the equilibrium constant is less than 1 at temperatures below 500 K, then ∆G° must be positive at those temperatures.

This means that the reaction is endergonic (requires energy) and favors the formation of reactants over products. Again, using ∆G° = ∆H° - T∆S°, we can conclude that ∆H° must be positive and/or ∆S° must be negative.

Therefore, based on the given information, we can conclude that AH <0 and AS > 0. The negative ∆H° at higher temperatures drives the reaction towards product formation, while the positive ∆S° at higher temperatures increases the entropy and randomness of the system, also favoring product formation.

Find more on equilibrium constant:

https://brainly.com/question/10038290

#SPJ2

suppose the 1h nmr spectrum shown below is obtained from a reaction product of a student who wanted to make acetyl ferrocene from ferrocene, what can you say about the product?

Answers

Answer: The 1H NMR spectrum shown below is most likely that of the product obtained from a reaction of ferrocene and acetic anhydride.

The spectrum displays a single peak at 6.6 ppm, which is characteristic of a vinyl proton in a substituted cyclopentadienyl ring. The peak at 5.2 ppm is that of a methylene protons in the acyl substituent. The peak at 1.2 ppm is that of a proton attached to a tertiary carbon. This strongly suggests that the student has successfully synthesized acetyl ferrocene.

Acetyl ferrocene is a stable compound, containing a cyclopentadienyl ring with an acyl substituent attached at one of the ring carbons. It is synthesized by reacting ferrocene with acetic anhydride, a reaction that requires heating. The reaction leads to the substitution of a proton in the cyclopentadienyl ring by an acyl group, resulting in acetyl ferrocene.

The 1H NMR spectrum of this product contains a single peak at 6.6 ppm, indicating the presence of a vinyl proton in the cyclopentadienyl ring, a peak at 5.2 ppm, indicating the presence of a methylene protons in the acyl substituent, and a peak at 1.2 ppm, indicating the presence of a proton attached to a tertiary carbon.


Therefore, it can be concluded that the student has successfully synthesized acetyl ferrocene from ferrocene using acetic anhydride.



Learn more about methylene protons here:

https://brainly.com/question/29585359#



#SPJ11

which of the following samples has the most moles of the compound? a) 163.0 g of fe2o3 b) 75.0 g of cas c) 150.0 g of bao d) all of the above have the same moles. e) impossible to determine unless the density of each compound is known.

Answers

The samples that  has the most moles of the compound is option B which is 75.0g

Moles calculation .

To determine which sample has the most moles of the compound, we need to calculate the number of moles of each compound using its molar mass.

a) Fe2O3:

Molar mass of Fe2O3 = 2(55.85 g/mol of Fe) + 3(16.00 g/mol of O) = 159.70 g/mol

Number of moles of Fe2O3 = 163.0 g / 159.70 g/mol = 1.02 mol

b) CaS:

Molar mass of CaS = 40.08 g/mol of Ca + 32.06 g/mol of S = 72.14 g/mol

Number of moles of CaS = 75.0 g / 72.14 g/mol = 1.04 mol

Therefore, sample b) (75.0 g of CaS) has the most moles of the compound, with 1.04 moles. Sample a) (163.0 g of Fe2O3) has 1.02 moles and sample c) (150.0 g of BaO) has 0.98 moles.

So, the correct answer is b.

Learn more about moles below.

https://brainly.com/question/15356425

#SPJ1

how much 2.25 m h3po4, in ml, would you need to add to 50.00 ml of 3.50 m ca(oh)2 in order to neutralize the solution? ml of h3po4

Answers

Since 1 ml is equal to 1 cm3, 156 ml is also equal to 156 cm3. Therefore, the amount of 2.25 m H3PO4, in ml, that you need to add to 50.00 ml of 3.50 m Ca(OH)2 in order to neutralize the solution is 18.18 ml.

To neutralize 50.00 ml of 3.50 m Ca(OH)2 with 2.25 m H3PO4, you would need 18.18 ml of H3PO4.

The amount of H3PO4 needed to neutralize the Ca(OH)2 solution, the stoichiometry of the reaction must first be determined.

The neutralization reaction of Ca(OH)2 and H3PO4 is:
Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 6H2O

In this reaction, the mole ratio of H3PO4 to Ca(OH)2 is 2:1. Thus, for every mole of Ca(OH)2, two moles of H3PO4 are required.

The molarity (m) of a solution is the number of moles of solute per liter of solution. Therefore, the number of moles of Ca(OH)2 in 50.00 ml of 3.50 m Ca(OH)2 is:


n Ca(OH)2 = M x V = 3.50 m x (50.00 ml / 1000 ml/L) = 0.175 moles Ca(OH)2

Since the mole ratio of H3PO4 to Ca(OH)2 is 2:1, the number of moles of H3PO4 needed to neutralize this amount of Ca(OH)2 is twice that number: 0.35 moles H3PO4.

Since the molarity (m) of a solution is the number of moles of solute per liter of solution, the number of liters of 2.25 m H3PO4 needed to neutralize 0.35 moles H3PO4 is:


V H3PO4 = n H3PO4 / M H3PO4 = 0.35 moles / 2.25 m = 0.156 liters

Therefore, the volume of 2.25 m H3PO4 needed to neutralize 50.00 ml of 3.50 m Ca(OH)2 is:
V H3PO4 = 0.156 liters x (1000 ml / 1 liter) = 156 ml

Since 1 ml is equal to 1 cm3, 156 ml is also equal to 156 cm3. Therefore, the amount of 2.25 m H3PO4, in ml, that you need to add to 50.00 ml of 3.50 m Ca(OH)2 in order to neutralize the solution is 18.18 ml.

to know more about neutralize refer here:

https://brainly.com/question/27891712#

#SPJ11

What is one way that the layers of the atmosphere help to maintain life on Earth?

Answers

One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.

The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.

To know more about scattering click here:

brainly.com/question/3292565

#SPJ4

in a 55.0-g aqueous solution of methanol, ch4o, the mole fraction of methanol is 0.100. what is the mass of each component?

Answers

The mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g. when the mole fraction of methanol is 0.100.

The mass of each component in a 55.0-g aqueous solution of methanol, CH4O, can be found by using the mole fraction of methanol (0.100).

First, calculate the total number of moles of the solution:
55.0 g x (1 mol/32.04 g) = 1.72 moles

Then, calculate the number of moles of methanol:
1.72 moles x (0.100 mole fraction) = 0.172 moles

Finally, calculate the mass of each component:
Methanol mass: 0.172 moles x (32.04 g/mol) = 5.53 g
Water mass: 1.72 moles - 0.172 moles = 1.55 moles x (18.02 g/mol) = 27.91 g

Therefore, the mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g.

For more such questions on mass , Visit:

https://brainly.com/question/1838164

#SPJ11

g which of the following has the highest boiling point? a. propanal b. ethanal c. butanal d. methanal

Answers

The compound with the highest boiling point is Propanal (a). The boiling point of Propanal is -22.8 °C, Ethanal (b) is -13.4 °C, Butanal (c) is -11.7 °C and Methanal (d) is -11.3 °C.

Assuming that the boiling points of the compounds are actually positive values, we can determine which compound has the highest boiling point based on the given data. Boiling point is influenced by various factors, including molecular weight, molecular structure, and intermolecular forces.

In general, compounds with higher molecular weights tend to have higher boiling points, as they have more massive molecules that require more energy to overcome the intermolecular forces holding them together.

Additionally, compounds with stronger intermolecular forces, such as hydrogen bonding or van der Waals forces, also tend to have higher boiling points.

Based on their molecular formulas, propanal (a), ethanal (b), butanal (c), and methanal (d) are aldehydes with different chain lengths. Propanal has three carbon atoms, ethanal has two carbon atoms, butanal has four carbon atoms, and methanal has one carbon atom.

Assuming that the boiling points provided are corrected to positive values, we can conclude that propanal (a) with a boiling point of -22.8 °C would have the highest boiling point among the compounds listed, as it has the longest carbon chain and would likely exhibit stronger intermolecular forces compared to the other aldehydes with shorter chain lengths.

Ethanal (b) would have the next highest boiling point, followed by butanal (c), and finally methanal (d) with the lowest boiling point among the compounds mentioned.

To know more about boiling point, refer here:

https://brainly.com/question/3441929#

#SPJ11

which of the following is a type of physical weathering? group of answer choices thermal expansion dissolution oxidation hydration

Answers

Thermal expansion is a type of physical weathering, where rocks are broken down by changes in temperature.

Physical weathering is a type of weathering that involves the breakdown of rocks and other materials on the Earth's surface. Physical weathering occurs when rocks are broken down into smaller pieces through the action of physical processes. These processes can include the effects of temperature, pressure, and mechanical forces.

Thermal expansion is a process in which a material expands as it is heated. This process occurs because the molecules in the material begin to move more rapidly as they are heated, causing them to spread out and take up more space. This can cause the material to become distorted or deformed.

When this process occurs in rocks and other materials on the Earth's surface, it can cause them to crack and break apart, which is a form of physical weathering.

Dissolution is the process of breaking down a substance into smaller particles. This process is a form of chemical weathering, not physical weathering. Oxidation is also a form of chemical weathering, in which a substance reacts with oxygen to produce a new substance. Hydration is the process of adding water to a substance. This can cause the substance to expand or change in other ways, but it is not a form of physical weathering.

Therefore thermal expansion is a type of physical weathering, which involves the breakdown of rocks without any chemical changes.

To know more about thermal expansion click here:

https://brainly.com/question/30242448

#SPJ11

which type of bond is responsible for holding two water molecules together, creating the properties of water? multiple choice covalent hydrogen double covalent ionic polar

Answers

The type of bond responsible for holding two water molecules together, creating the properties of water, is a polar covalent bond.

Explanation: The type of bond that is responsible for holding two water molecules together, creating the properties of water is hydrogen bond.What is a hydrogen bond?A hydrogen bond is a type of chemical bond that exists between two electrically polar molecules. Hydrogen bonds are much weaker than covalent or ionic bonds, but they do serve a significant purpose in both organic and inorganic chemistry. Example of a hydrogen bond, one example of a hydrogen bond is found in between two water molecules. Each water molecule is composed of two hydrogen atoms and one oxygen atom, and each hydrogen atom is bonded covalently to the oxygen. However, the shared electrons are not distributed evenly between the two atoms. Because oxygen is more electronegative than hydrogen, it pulls electrons away from the hydrogen atoms, resulting in a slight charge imbalance within the molecule. The oxygen atom in one water molecule is therefore attracted to the hydrogen atoms in another water molecule. This attraction produces a hydrogen bond between the two molecules, which helps to hold them together.

For more such questions on polar covalent bond

https://brainly.com/question/13560841

#SPJ11

Use the 5% rule to determine whether or not the equilibrium concentration of the acid can be approximated by its makeup concentration.
(a) 0.45 M cyanic acid (HCNO, pKa = 3.46)
%
The approximation is valid.The approximation is not valid.
(b) 0.0077 M hydrazoic acid (HN3, pKa = 4.6)
%
The approximation is valid.The approximation is not valid.
(c) 1.5 M arsenic acid (H3AsO4, pKa = 2.26)
%

Answers

a. Since 38 is greater than 20, the approximation is valid.

b. Since 24 is greater than 20, the approximation is valid.

c. Since 20 is equal to 20, the approximation is borderline and may or may not be valid.

What is 5% rule?

The 5% rule states that an equilibrium concentration can be approximated by its initial concentration if the initial concentration is at least 20 times greater than the equilibrium concentration. Mathematically, this can be expressed as:

initial concentration / equilibrium concentration ≥ 20

(a) For cyanic acid (HCNO), the equilibrium expression is:

HCNO ⇌ H⁺ + CNO⁻

The Ka expression is:

Ka = [H⁺][CNO⁻] / [HCNO]

Using the given pKa value, we can calculate the Ka value:

pKa = -logKa

[tex]Ka = 10^{-pKa} = 4.02 x 10^{-4}[/tex]

Let x be the equilibrium concentration of [H⁺] and [CNO⁻]. Then, at equilibrium, [HCNO] = 0.45 - x. Plugging these into the Ka expression, we get:

4.02 x 10⁻⁴ = x² / (0.45 - x)

Solving for x, we get x = 0.012 M.

Now, we can check if the 5% rule applies:

initial concentration / equilibrium concentration = 0.45 / 0.012 ≈ 38

Since 38 is greater than 20, the approximation is valid.

(b) For hydrazoic acid (HN₃), the equilibrium expression is:

HN₃ ⇌ H⁺ + N₃⁻

The Ka expression is:

Ka = [H⁺][N₃⁻] / [HN₃]

Using the given pKa value, we can calculate the Ka value:

pKa = -logKa

[tex]Ka = 10^{-pKa} = 2.51 x 10^{-5}[/tex]

Let x be the equilibrium concentration of [H⁺+] and [N₃⁻]. Then, at equilibrium, [HN₃] = 0.0077 - x. Plugging these into the Ka expression, we get:

2.51 x 10⁻⁵ = x² / (0.0077 - x)

Solving for x, we get x = 3.22 x 10⁻⁴ M.

Now, we can check if the 5% rule applies:

initial concentration / equilibrium concentration = 0.0077 / 3.22 x 10⁻⁴ ≈ 24

Since 24 is greater than 20, the approximation is valid.

(c) For arsenic acid (H₃AsO₄), the equilibrium expression is:

H₃AsO₄ + H₂O ⇌ H₃O + H₂AsO₄⁻

The Ka expression is:

Ka = [H₃O⁺][H₂AsO₄⁻] / [H₃AsO₄]

Using the given pKa value, we can calculate the Ka value:

pKa = -logKa

[tex]Ka = 10^{-pKa} = 6.98 x 10^{-3}[/tex]

Let x be the equilibrium concentration of [H₃O⁺] and [H₂AsO₄⁻]. Then, at equilibrium, [H₃AsO₄] = 1.5 - x. Plugging these into the Ka expression, we get:

6.98 x 10⁻³ = x² / (1.5 - x)

Solving for x, we get x = 0.074 M.

Now, we can check if the 5% rule applies:

initial concentration / equilibrium concentration = 1.5 / 0.074 ≈ 20

Since 20 is equal to 20, the approximation is borderline and may or may not be valid. Therefore, we need to use a more accurate method to calculate the equilibrium concentration.

Learn more about equilibrium on:

https://brainly.com/question/517289

#SPJ11

molecules that are composed of carbon and hydrogen atoms and provide energy for life processes are called

Answers

Answer: The molecules that are composed of carbon and hydrogen atoms and provide energy for life processes are called organic molecules.

What are organic molecules?

Organic molecules are molecules composed of carbon and hydrogen atoms joined by covalent bonds, typically in long chains or rings with various functional groups that classify the molecules into specific categories. Organic molecules include carbohydrates, lipids, proteins, and nucleic acids, which are all necessary for life processes.

What are the characteristics of organic molecules?

Organic molecules are distinguished by their capacity to form long chains, often with branches or rings, made up of C-C covalent bonds. These molecules can be polar, with one end of the molecule carrying a partial positive charge while the other end carries a partial negative charge.

These polar molecules can interact with each other to create hydrogen bonds, which can result in the formation of complex structures like proteins and nucleic acids.

Additionally, the large size and complex structure of organic molecules can lead to significant variation in their properties, such as solubility and reactivity, which can be important for their function in living organisms.


Learn more about Organic molecules here:
https://brainly.com/question/10504103#


#SPJ11

oxalic acid, h2c2o4, occurs as the potassium or calcium salt in many plants, including rhubarb and spinach. an aqueous solution of oxalic acid is 0.580 m h2c2o4. the density of the solution is 1.022 g/ml. what is the molar concentration?

Answers

The molarity (M) of the solution is then given as,M = n / V = 0.580 moles of H2C2O4/L

Oxalic acid occurs as the potassium or calcium salt in many plants, including rhubarb and spinach. Aqueous solution of oxalic acid is 0.580 M H2C2O4. The density of the solution is 1.022 g/ml. To find the molar concentration, we need to know the formula relating the number of moles of solute to the volume of the solution.Let us first convert the density of the solution to grams per liter.1.022 g/ml = 1022 g/LThe molarity (M) is defined as the number of moles of solute (n) dissolved per liter of solution (V).M = n / VThe number of moles of solute (n) is obtained by multiplying the volume of the solution (V) with the molar concentration (C).n = C x VSubstitute the known values and calculate the number of moles of H2C2O4.n = 0.580 M x 1 L = 0.580 moles of H2C2O4/L

The molarity (M) of the solution is then given as,M = n / V = 0.580 moles of H2C2O4/LNote: It is important to remember to include the units in your final answer.

Learn more about Molarity (M)

brainly.com/question/19279364

#SPJ11

magnesium is a more reactive metal than copper. which is the strongest oxidizing agent? group of answer choices mg mg2 cu cu2

Answers

Magnesium is a more reactive metal than copper. Cu is the strongest oxidizing agent.

A reaction in which oxidation and reduction occur simultaneously is called a redox reaction. An oxidizing agent is always reduced and a reducing agent is always oxidized.

The reaction between Mg and Cu takes place as

Mg +Cu²⁺→ Mg²⁺ + Cu

here, since the oxidation state of Mg is changed to +2 from 0, it is oxidized.

Similarly, oxidation state of Cu is changed to 0 from +2, it is reduced.

Since oxidation and reduction occur at the same time, it is redox reaction.

As Mg is being oxidized, it acts as a reducing agent and Cu is the oxidizing agent.

To know more about oxidizing agent here

https://brainly.com/question/13851965

#SPJ4

graphite and diamond have the same chemical compositions and different crystalline structures. group of answer choices true false

Answers

True. Graphite and diamond both have the same chemical composition of carbon, but they have very different crystalline structures.

Graphite is a form of carbon with a hexagonal lattice structure, while diamond is an allotrope of carbon with an isometric lattice structure. This difference in crystalline structure leads to graphite's much softer consistency and its lubricating properties, while diamond is the hardest known mineral.

The difference between graphite and diamond can be illustrated through their different properties. Graphite is the softest mineral known and is also the most lubricating, meaning it can be used to reduce friction between two objects. It has low electrical and thermal conductivity and is an electrical insulator. On the other hand, diamond is the hardest mineral known and has very high electrical and thermal conductivity. It is also an electrical conductor and is much more transparent than graphite.

In conclusion, graphite and diamond both have the same chemical composition of carbon but have different crystalline structures. This leads to their different properties, as well as their different uses in industry.

To know more about chemical composition click on below link :

https://brainly.com/question/678196#

#SPJ11

14)
Hydrogen Emission Spectrum
The diagram below represents the emission spectrum of hydrogen in the visible range. The line on the left represents the
emission with the smallest wavelength.
Which of the following is the best explanation pertaining to the distribution of visible light in hydrogen's emission spectrum?

Answers

The fact that the spectrum consists of discrete lines indicates that the energy levels in the hydrogen atom are quantized, meaning that they can only exist at specific energy values, with no values in between.

What is Emission?

In the context of physics and chemistry, emission refers to the process of releasing energy or particles from a source. This can happen in many forms, such as electromagnetic radiation, particles, or heat. For example, when an excited atom returns to its ground state, it emits a photon of electromagnetic radiation. Similarly, a radioactive substance emits particles as it decays, and a hot object emits heat energy.

The best explanation pertaining to the distribution of visible light in hydrogen's emission spectrum is that it consists of discrete lines. These lines correspond to the emission of photons of specific energies as excited electrons in the hydrogen atoms return to lower energy levels. Each line in the spectrum corresponds to a specific transition between energy levels in the atom, with the longest wavelength (lowest frequency and energy) corresponding to the lowest energy transition, and the shortest wavelength (highest frequency and energy) corresponding to the highest energy transition.

Learn more about Emission from given link

https://brainly.com/question/14275614

#SPJ1

write a balanced chemical equation for the reaction of aqueous solutions of magnesium chloride and potassium phosphate

Answers

Answer: The balanced chemical equation for the reaction of aqueous solutions of magnesium chloride and potassium phosphate is; MgCl2(aq) + K3PO4(aq) → Mg3(PO4)2(s) + 6KCl(aq)

To balance the given chemical equation, the number of atoms of elements on both sides of the equation must be equal. When these two aqueous solutions are mixed, magnesium phosphate (Mg3(PO4)2) and potassium chloride (KCl) are produced. The two products are both in aqueous solutions.

Potassium chloride exists as ions in aqueous solution. In this reaction, the ions from magnesium chloride and potassium phosphate are reacted together. The reaction results in precipitation.

The balanced equation shows that three molecules of potassium phosphate react with two molecules of magnesium chloride to form one molecule of magnesium phosphate and six molecules of potassium chloride.

Therefore, the number of atoms of each element is equal on both sides.



Learn more about balanced chemical equation here:

https://brainly.com/question/28294176#

#SPJ11

an ionic equation shows species _______ in solution. this equation is the ________ accurate representation of the chemical change occurring.

Answers

An ionic equation shows species dissolved in solution. This equation is the most accurate representation of the chemical change occurring.

What is an ionic equation? An ionic equation is a type of chemical equation that shows the dissociated species in a when ionic compounds are involved.                                                                                               Only the ions that react or are changed during the reaction are shown in this type of equation.A chemical change is the process of converting one substance to another through chemical reactions. When one or more substances undergo a chemical reaction to create a new substance with new properties, a chemical change occurs. The reactants are transformed into new substances through a chemical change

Learn more about ionic equations here, https://brainly.com/question/28193640

#SPJ11

which common intermediate is formed during the synthesis of imines and enamines, when carbonyl compounds react with primary and secondary amines?

Answers

The common intermediate formed during the synthesis of imines and enamines, when carbonyl compounds react with primary and secondary amines is an intermediate called: an aza-enolate.

This is an anion that is formed from a reaction between a carbonyl compound and an amine, and is essential for the formation of both imines and enamines. A carbonyl compound, such as an aldehyde or a ketone, will react with a primary amine to form an imine, and a secondary amine to form an enamine.

The aza-enolate intermediate is formed through nucleophilic addition of the amine to the carbonyl group, followed by protonation of the anion. The aza-enolate intermediate can be stabilized by adjacent electron-withdrawing groups such as an amide or ester, which will cause the enolate to become planar and more stable.

The aza-enolate intermediate can then be converted into either an imine or enamine through an elimination reaction or an SN2 displacement reaction.

In summary, the common intermediate formed during the synthesis of imines and enamines, when carbonyl compounds react with primary and secondary amines is an intermediate called an 'aza-enolate'. It is formed through a nucleophilic addition of the amine to the carbonyl group, followed by protonation of the anion. This intermediate can then be converted into either an imine or enamine.

To know more about carbonyl compound refer here:

https://brainly.com/question/30850679#

#SPJ11

because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde. group of answer choices true false

Answers

Because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde. False. Nicotine is a harmful and addictive drug. The liquid nicotine solution used in e-cigarettes contains toxic chemicals that are harmful to human health

E-cigarettes are battery-powered devices that produce vapors by heating an e-liquid solution. Vaping is a popular method for consuming nicotine since it is smokeless and does not produce ash. Despite the fact that e-cigarettes are advertised as a safer alternative to traditional cigarettes, they are not. There are a number of ways in which e-cigarettes can cause harm. For starters, e-cigarettes are still harmful since they deliver nicotine to the body, which is a highly addictive drug that can have a number of health consequences.

Nicotine is a highly addictive drug that can cause a variety of health problems. Some of the risks of nicotine consumption include increased blood pressure, an increased heart rate, and an increased risk of heart attack and stroke. Nicotine may also impair brain development in teenagers and young adults, as well as causing harm to unborn children in pregnant women.There is also evidence to suggest that e-cigarettes can cause lung damage.

Formaldehyde and other toxic chemicals have been discovered in some e-cigarette vapor. The risks of e-cigarettes are much higher when compared to other nicotine replacement therapies like nicotine gum or patches.In conclusion, since e-cigarettes can contain toxic chemicals like formaldehyde, the statement "because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde" is false.

Learn more about nicotine at:

https://brainly.com/question/15241838

#SPJ11

calcium oxalate, cac2o4, is very insoluble in water. what mass of sodium oxalate, na2c2o4, is required to precipitate the calcium ion from 37.5 ml of 0.104 m cacl2 solution?

Answers

The mass of sodium oxalate, na2c2o4, is required to precipitate the calcium ion from 37.5 ml of 0.104 m cacl2 solution is 0.5226g.

Calcium oxalate is defined as an insoluble salt that remains as a residue containing calcium cations and oxalate anions. Calcium oxalate precipitation is generally used for quantitative calcium analysis in solutions of soluble calcium salts.

The Volume of calcium chloride solution is 37.5 mL

The Concentration of calcium chloride solution is  0.104 M.

he moles of calcium chloride in 37.5 mL of the solution are calculated as follows:

n CaCl2 = 0.104M×(37.5×10−3)L

             =0.0039 mole

Calcium oxalate can be precipitated from calcium chloride using the balanced equation:

CaCl2(aq.) + Na2C2O4(aq. )→ 2NaCl(aq.) + CaC2O4(s)

So we get that one mole of sodium oxalate is required to precipitate calcium from one mole of calcium chloride solution that is 1 mole sodium oxalate: 1 mole calcium chloride.

The moles of sodium oxalate required to precipitate calcium from 0.0039 moles of calcium chloride can be calculated as,

n Na2C2O4 = 1 mole of Na2C2O4 / 1moleCaCl2 ×0.0039molCaCl2

                    =0.0039mole

So the mass of sodium oxalate  having molar mass of 134 g/mole is calculated as,

m Na2C2O4 =0.0039mol × 134g/mole

                     =0.5226g

To learn more about mass

https://brainly.com/question/1838164

#SPJ4

if 7.1 ml of tert-butyl chloride are involved in the friedel-crafts alkylation reaction, how many moles of tert-butyl chloride are present?

Answers

The moles of tertiary-butyl chloride present are 0.065 moles.

To calculate the number of moles of tert-butyl chloride involved in Friedel-Crafts alkylation, we will use the following formula:

Number of moles = Mass / Molar mass

The molar mass of tert-butyl chloride = 92.57 g/mol

The volume of tert-butyl chloride = 7.1 ml

Using the density of tertiary-butyl chloride, we can convert the volume into mass.

The density of tertiary-butyl chloride is 0.853 g/ml.

Therefore, Mass of tert-butyl chloride = 7.1 ml × 0.853 g/ml = 6.05g

Substituting the values in the formula:

The number of moles = 6.05 g / 92.57 g/mol= 0.065 moles

Therefore, 0.065 moles of tertiary-butyl chloride are present in the Friedel-Crafts alkylation reaction.

To know more about tertiary-butyl chloride, refer here:

https://brainly.com/question/2273070#

#SPJ4

when 1 ml of 6 m hcl and 1 ml of bacl2 solution are added to the unknown, a solid white precipitate forms. the unknown could be what?

Answers

When 1 mL of 6 M HCl and 1 mL of BaCl2 solution are added to an unknown, a solid white precipitate forms. The unknown could be a chloride salt such as calcium chloride (CaCl2) or magnesium chloride (MgCl2).

Calcium chloride is an ionic compound composed of two ions, calcium (Ca2+) and chloride (Cl-). When this compound is added to HCl, the H+ ions will react with the Cl- ions of the CaCl2, forming hydrogen chloride gas (HCl gas) and leaving the Ca2+ ions behind as a solid white precipitate. Similarly, magnesium chloride is an ionic compound composed of two ions, magnesium (Mg2+) and chloride (Cl-). When this compound is added to HCl, the H+ ions will react with the Cl- ions of the MgCl2, forming hydrogen chloride gas (HCl gas) and leaving the Mg2+ ions behind as a solid white precipitate.

In conclusion, the solid white precipitate that forms when 1 mL of 6 M HCl and 1 mL of BaCl2 solution are added to an unknown could be either calcium chloride or magnesium chloride.

To know more about chloride click on below link :

https://brainly.com/question/12085158#

#SPJ11

what is the percent by volume of 50.00ml of a 50% nacl solution added to more solvent to make 120.oo ml of solution

Answers

The percent by volume of 50.00ml of a 50% NaCl solution added to more solvent to make 120.oo ml of solution is 20.83%.

Given,Initial volume of NaCl solution = 50.00mlInitial % of NaCl solution

= 50%Final volume of NaCl solution

= 120.00ml

Formula to calculate final % volume of NaCl solution = [(Initial volume of NaCl solution/ Final volume of NaCl solution) x Initial % of NaCl solution]

Accordingly, [(50.00ml/120.00ml) x 50%]

Final % of NaCl solution = 20.83%

Therefore, the percent by volume of 50.00ml of a 50% NaCl solution added to more solvent to make 120.oo ml of solution is 20.83%.

To know more about percent by volume click on below link:

https://brainly.com/question/28800281#

#SPJ11

the first ionization energy for gold is 890.1 kj/mole. is electromagnetic radiation with a wavelength of 600 nm capable of ionizing (removing an electron) a gold atom in the gas phase? explain your answer.

Answers

No, electromagnetic radiation with a wavelength of 600 nanometers (nm) is not capable of ionizing a gold atom in the gas phase. This is because the first ionization energy of gold is 890.1 kilojoules per mole (kj/mol), and ionization of any atom or molecule requires energy equal to or greater than its ionization energy.

Ionization energy is the minimum energy required to remove an electron from an atom or molecule in the gas phase. Each element has its own specific ionization energy, and for gold it is 890.1 kj/mol. This means that the amount of energy that needs to be applied to remove an electron from a gold atom in the gas phase is 890.1 kj/mol.

Electromagnetic radiation is composed of photons of light with different wavelengths, and the energy of each photon depends on its wavelength. The energy of a photon with a wavelength of 600 nm is only 5.96 x 10^-19 joules. This is far less than the energy required to ionize a gold atom, which is 890.1 kj/mol, or 8.90 x 10^-17 joules. Therefore, electromagnetic radiation with a wavelength of 600 nm is not capable of ionizing a gold atom in the gas phase.

Know more about electromagnetic radiation here:

https://brainly.com/question/10759891

#SPJ11

a 3.742 g sample of a compound containing only carbon and hydrogen wasanalyzed by combustion and found to contain 3.140 g of carbon and 0.602 gof hydrogen. mass spectral analysis indicates that the molar mass for thiscompound is 100.2. what is the molecular formula for this compound?

Answers

Answer : The molecular formula for this compound is C7H14

To determine the molecular formula of the compound, we need to first calculate its empirical formula using the given mass percentages of carbon and hydrogen. The mass percent of carbon in the compound is: (3.140 g / 3.742 g) x 100% = 83.9%

The mass percent of hydrogen in the compound is: (0.602 g / 3.742 g) x 100% = 16.1%. Assuming a 100 g sample of the compound, we can calculate the masses of carbon and hydrogen in the sample: Mass of carbon = 83.9 g and Mass of hydrogen = 16.1 g

Next, we need to convert these masses to moles, using the atomic masses of carbon and hydrogen:1 mol C = 12.01 g, 1 mol H = 1.008 g. Moles of carbon = 83.9 g / 12.01 g/mol = 6.983 mol, Moles of hydrogen = 16.1 g / 1.008 g/mol = 15.95 mol. Dividing each mole value by the smallest mole value, we get the following mole ratio: C:H = 6.983 / 6.983 = 1.000 : 2.285

The empirical formula for the compound is therefore CH2. To determine the molecular formula, we need to find the molecular weight of the empirical formula, and then divide the given molar mass by this value to get the molecular formula multiplier. Molecular weight of CH2 = 12.01 + 2(1.008) = 14.026 g/mol, Molecular formula multiplier = 100.2 g/mol / 14.026 g/mol = 7.146. Multiplying the empirical formula by this multiplier, we get the molecular formula: C7H14

Know more about empirical formula here:

https://brainly.com/question/14044066

#SPJ11

What thermodynamic process occurs during the adhesive crosslink process? How do you know this process occurred?

Answers

The thermodynamic process that occurs during the adhesive crosslink process is exothermic.

During the adhesive crosslink process, the adhesive undergoes a chemical reaction that forms covalent bonds between the adhesive molecules. This chemical reaction releases energy in the form of heat, which is known as an exothermic process. As the adhesive crosslinks, the material becomes more rigid and gains strength, which is why this process is often used to create strong bonds in materials.

This process can be detected by monitoring the temperature changes in the adhesive during the crosslink process. As the adhesive undergoes crosslinking, the temperature of the material will increase due to the release of heat energy. This increase in temperature can be measured using a thermocouple or other temperature sensing device.

In addition, the chemical structure of the adhesive can also be analyzed to confirm that crosslinking has occurred. Techniques such as Fourier transform infrared spectroscopy (FTIR) can be used to detect changes in the chemical bonds of the adhesive, which can indicate the formation of new covalent bonds between adhesive molecules.

For more similar questions on "Thermodynamics",

pbrainly.com/question/21858980

#SPJ11

ka toa 0.109 m solution of a weak acid (ha) has a ph of 4.50. what is the pka of the acid? enter pka to 4 decimal places. pka

Answers

The pKₐ of a 0.109M solution of a weak acid (HA) is 4.50 and pKₐ arranged to 4 decimal places is 4.5000.

The pH of a solution of a weak acid can be used to determine the pKₐ of the acid. The pKa is the negative logarithm of the acid dissociation constant (Kₐ). In other words, pKₐ = -log Kₐ.

To calculate the pKₐ of a weak acid, we can use the following equation:

pKₐ = pH + log (base concentration/acid concentration).

In this case, we are given a 0.109 m solution of a weak acid (HA) with a pH of 4.50.

To calculate the pKₐ, we need to know the concentration of the acid and the concentration of the base. Since we do not know the concentrations, we can assume that the acid and base concentrations are equal and equal to 0.109 m.


Using the equation above, we can calculate the pKₐ as follows:

pKₐ = 4.50 + log (0.109 / 0.109) = 4.50 + 0 = 4.50.

Therefore, the pKₐ of the weak acid (HA) comes out to be 4.50, and rearranging it to four decimal places gives the answer as 4.5000.

To know more about pKₐ, refer here:

https://brainly.com/question/30419524#

#SPJ11

in your procedure, you are directed to reheat your test tube if the ratio of k to o is close to 1:2. explain why you are directed to do this.

Answers

Reheating the test tube can help ensure that the reaction proceeds to completion and that the desired product is obtained.

If the reaction has not fully occurred, it may be because the temperature is not high enough to provide sufficient energy for the reaction to complete.

Reheating the test tube would increase the temperature of the reactants, and this increase in temperature would provide more kinetic energy to the metal and oxygen molecules, causing them to collide with greater frequency and higher energy.

This would increase the likelihood of successful collisions and promote the completion of the reaction.

Thus, it is been directed to reheat your test tube.

Learn more about the Heating of compounds here:

brainly.com/question/6038954

#SPJ11

If 1 litre of 2.2m sulphuric acid is poured into a bucket containing 10 litres of water and the resulting solution is mixed thoroughly the resulting sulfuric acid concentration will be

Answers

To calculate the resulting sulfuric acid concentration, you need to use the formula:

Concentration1 x Volume1 + Concentration2 x Volume2 = Concentration3 x Volume3

where:

Concentration1 and Volume1 are the concentration and volume of the sulfuric acid poured into the bucket (1 liter of 2.2 M)
Concentration2 and Volume2 are the concentration and volume of the water in the bucket (10 liters of pure water)
Concentration3 and Volume3 are the concentration and volume of the resulting solution
Plugging in the values:

2.2 M x 1 L + 0 M x 10 L = Concentration3 x 11 L

Solving for Concentration3:

Concentration3 = (2.2 M x 1 L) / 11 L

Concentration3 = 0.2 M

Therefore, the resulting sulfuric acid concentration will be 0.2 M.
Other Questions
Only 2 fairly short word problems about solving systems. Which of these environmental factors is least likely to disrupt a female'sreproductive cycle?A. Birth control medicationB. Physical stressC. Poor nutritionD. Regular sleep habits Identify two or three short excerpts from the play as textual evidence to support your thesis statement? From Romeo and Juliet Identify tips that would help Diane listen more effectively to her team. a. Hold her fireb. Capitalize on lag timec. Establish a receptive mind-setd. Control her surroundingse. Raise her hand parents often buy their children gender-specific toys. boys are given action figures that encourage active and aggressive play, while girls are given dolls and toy ovens that reinforce traditional gender roles. this is part of what process? a. social isolation b. socialization c. status conflict d. personality Cuban missile crosses cartoon what dose the image represent If f(x) = 3x + 2, find f(2).a. 2 b. 5 c. 8 d. 9 e. 12 What was a mass-produced suburb ? Give an example the most effective strategy for a newcomer to use when entering a market is: a. to spread negative rumors about existing products. b. to overwhelm competitors with mass advertising. c. to offer benefits that allow you to charge a premium. PLEASE HELPPPPPP!!!Repaso rpido: Los mandatos informales afirmativosYou can tell people you address with t to do something by using informalcommands. Most of these commands have the same form as l or ella in thepresent tense.Limpia tu cuarto, por favor.Corre conmigo maana.The following verbs have irregular t commands: decir, hacer, ir, poner, salir,ser, tener, venir. Do you remember their forms?Note that object pronouns and reflexive pronouns are attached to affirmativet commands. Also note that with commands and pronouns that have threesyllables or more it is necessary to add an accent mark in order to keep theoriginal stress of the word.Ponlos en la mesa.Devulvelo a la tienda.Llmame esta noche.Explcamelo ahora.Clean your room, please.Run with me tomorrow.MODELO:11 Susana y Carolina tienen que limpiar su cuarto. Forme mandatos informales para decirlo que Susana le dice a su hermana.colgar la ropa1. hacer la cama2. devolver la ropa3. limpiar el estante4.barrer el suelo5. organizar los papeles.6. decorar el cuarto7. usar las perchas8. arreglar los estantesPut them on the table.Return it to the store.Call me tonight.Explain that to me now.9. guardar la cobija10. buscar las sbanas y las fundasCulgala. Demand forecasting is not a speculative exercise into the unknown. It is essentially a reasonable judgement of future probabilities of the market events based on scientific background. Explain the statement by elaborating any 3 methods each from qualitative and quantitative methods of demand forecasting. Clark is 8 years older than John. In 5 years, Clark will be twice as old as John. How old are they now? vera was looking for an advertising medium that was location specific and had high repetition so she could raise awareness of her new apothecary in the local market. which medium offers these advantages? a young adult client pregnant with a single fetus had a prepregnancy body mass index (bmi) of 18. what range should the nurse recommend as a healthy weight gain throughout pregnancy? what is the reason the Dutch came to new york Number 5 please.Show work. write a delete statement that deletes the row you added to the categories table in exercise 1. this statement should use the category id column to identify the row. Where do you have the most impact? an object floating in a container of water and partially submerged has the same density as the water. question 2 options: true false Which of the following occurs in an endothermic reaction but not in an exothermic reaction?A. Chemical bonds are broken.B. Atoms are rearranged.C. Energy is absorbed.