Find the area of the surface obtained by rotating the given
curve about the x-axis. Round your answer to the nearest whole
number.
x = ^2,y = 2,0 ≤ ≤ 9

The equation of the polar coordinates is given as r(θ) = 10 / cos(θ - α)

In polar coordinates, the equation for a line through a point (r0, θ0) that is tangent to the circle centered at the origin with radius r0 is:

r(θ) = r0 / cos(θ - θ0)

So, the polar equation for the special line in your case would be:

r(θ) = 10 / cos(θ - θ)

However, this is a trivial solution (i.e., every point on the line coincides with P), because the argument inside the cosine function is zero for every θ.

The most appropriate way to express this would be to keep θ0 as a specific value. Let's say θ0 = α (for some angle α).

Then the equation becomes:

r(θ) = 10 / cos(θ - α)

This equation will yield the correct line for a specific α, which should be the same as the θ value of point P for the line to go through point P. This line will be such that point P is closer to the origin than any other point on that line.

Read more on polar coordinates here

https://brainly.com/question/14965899

#SPJ4

If your teacher wrote f(x) = 0, x = 3, but graph of the function f(x) shows that it is always equal to 2, regardless of the approach, there may be error. It is crucial to clarify this discrepancy with your teacher to ensure.

Based on your description, there seems to be a discrepancy between the given equation f(x) = 0, x = 3 and the observed behavior of the graph, which consistently shows f(x) as 2. It is possible that there was a mistake in the equation provided by your teacher or in your interpretation of it.

To resolve this discrepancy, it is essential to communicate with your teacher and clarify the intended equation or expression. They may provide further explanation or correct any misunderstandings. Open dialogue with your teacher will help ensure that you have accurate information and a clear understanding of the function and its behavior.

To learn more about function click here : brainly.com/question/21145944

#SPJ11

(a) To solve the differential equation -xy, we can use separation of variables. By integrating both sides and applying the initial condition when x=0, y=50, we can find the particular solution.

(b) The value of x for which y is decreasing can be determined by analyzing the sign of the derivative of y with respect to x.

(a) Given the differential equation -xy, we can use separation of variables to solve it. Rearranging the equation, we have dy/y = -xdx. Integrating both sides, we get ∫(1/y)dy = -∫xdx. This simplifies to ln|y| = -[tex]x^{2}[/tex]/2 + C, where C is the constant of integration. Exponentiating both sides, we have |y| = e^(-[tex]x^{2}[/tex]/2 + C) = e^C * e^(-[tex]x^{2}[/tex]/2). Since y > 0, we can drop the absolute value and write the solution as y = Ce^(-[tex]x^{2}[/tex]2). To find the particular solution, we use the initial condition y(0) = 50. Substituting the values, we have 50 = Ce^(-0^2/2) = Ce^0 = C. Therefore, the particular solution to the differential equation is y = 50e^(-[tex]x^{2}[/tex]/2).

(b) To determine the values of x for which y is decreasing, we analyze the sign of the derivative of y with respect to x. Taking the derivative of y = 50e^(-[tex]x^{2}[/tex]/2), we get dy/dx = -x * 50e^(-[tex]x^{2}[/tex]/2). Since e^(-[tex]x^{2}[/tex]2) is always positive, the sign of dy/dx is determined by -x. For y to be decreasing, dy/dx must be negative. Therefore, -x < 0, which implies that x > 0. Thus, for positive values of x, y is decreasing.

Learn more about derivative here: https://brainly.com/question/28144387

#SPJ11

B is equal to arcsin((sin(40°) * y) / (2|A|)) in terms of A, D, and E.

The law of sines specifies how many sides there are in a triangle and how their individual sine angles are equal. The sine law, sine rule, and sine formula are additional names for the sine law. The side or unknown angle of an oblique triangle is found using the law of sine.

To determine the value of B in terms of A, D, and E, we can use the law of sines in triangle ABC. The law of sines states that in any triangle ABC with sides a, b, and c opposite angles A, B, and C, respectively:

sin(A) / a = sin(B) / b = sin(C) / c

In our given triangle, we know the following information:

- |BC| = 5 (magnitude of segment BC)

- |CD| = 8 (magnitude of segment CD)

- Angle C = 35° (angle formed by C and D)

- Angle A = 40° (angle formed by A and E)

- |AE| = 2|A| (magnitude of segment AE is twice the magnitude of segment A)

Let's denote |AB| as x (magnitude of segment AB) and |BE| as y (magnitude of segment BE). Based on the information given, we can set up the following equations:

sin(A) / |AE| = sin(B) / |BE|

sin(40°) / (2|A|) = sin(B) / y    ...equation 1

sin(B) / |BC| = sin(C) / |CD|

sin(B) / 5 = sin(35°) / 8

sin(B) = (5/8) * sin(35°)

B = arcsin((5/8) * sin(35°))    ...equation 2

Now, let's substitute equation 2 into equation 1 to solve for B in terms of A, D, and E:

sin(40°) / (2|A|) = sin(arcsin((5/8) * sin(35°))) / y

sin(40°) / (2|A|) = (5/8) * sin(35°) / y

B = arcsin((5/8) * sin(35°)) = arcsin((sin(40°) * y) / (2|A|))

Therefore, B is equal to arcsin((sin(40°) * y) / (2|A|)) in terms of A, D, and E.

Learn more about law of sines on:

https://brainly.com/question/14517417

#SPJ4

Answer: 169

Step-by-step explanation:

Answer:

Step-by-step explanation:

Functions are not differentiable at sharp corners.  For an absolute value function, a sharp corner happens at the vertex.

f(x) = a |x -h| + k  where (h, k) is the vertex

For your function:

g(x) = |x-6| + 2     the vertex is at (6, 2) so the function is not differentiable at (6,2)

b) There are 2 ways to solve this.  You can break down the derivative or know the slope.  We will take a look at slope.  The derivative is the slope of the function at that point. We know that there is no stretch to your g(x) function so the slope left of (6,2) is -1 and the slope right of (6,2) is +1  

Knowing this your g' will all be -1 or +1

g'(0) = -1

g'(1) = -1

g'(7) = 1

g'(14) = 1

Let F(x) = 6 * 5 sin (mt?) dt 5.  without the specific value of m, we cannot provide the numerical evaluations for F(2) and F'(3). However, we can determine the general form of F'(x) as 6 * 5 * m * cos(m * x) by differentiating F(x) with respect to x.

To evaluate the given expressions for the function F(x) = 6 * 5 sin(mt) dt from 0 to 5, let's proceed step by step:

(a) To find F(2), we substitute x = 2 into the function:

F(2) = 6 * 5 sin(m * 2) dt from 0 to 5

As there is no specific value given for m, we cannot evaluate this expression without further information. It depends on the value of m.

(b) To find F'(x), we need to differentiate the function F(x) with respect to x:

F'(x) = d/dx (6 * 5 sin(m * x) dt)

Differentiating with respect to x, we get:

F'(x) = 6 * 5 * m * cos(m * x)

(c) To find F'(3), we substitute x = 3 into the derivative function:

F'(3) = 6 * 5 * m * cos(m * 3)

Similar to part (a), without knowing the value of m, we cannot provide a specific numerical answer. The value of F'(3) depends on the value of m.

In summary, without the specific value of m, we cannot provide the numerical evaluations for F(2) and F'(3). However, we can determine the general form of F'(x) as 6 * 5 * m * cos(m * x) by differentiating F(x) with respect to x.

Learn more about derivative function here:

https://brainly.com/question/29020856

#SPJ11

Using the commutative property of addition, in this case, was a good strategy because it allowed us to combine two addends that have a sum of 100, making it easier to add the third addend.

The commutative property of addition states that changing the order of addends does not change the sum. For example, 2 + 5 is the same as 5 + 2. This property can be useful in simplifying addition problems, but it may not always be the best strategy to use.

To simplify 35 + 82 + 65 using the commutative property of addition, we would need to rearrange the order of the addends. We could add 35 and 65 first since they have a sum of 100. Then, we could add 82 to 100 to get a final sum of 182.

35 + 82 + 65 = (35 + 65) + 82 = 100 + 82 = 182. In this case,  it was a good strategy because it allowed us to combine two addends that have a sum of 100, making it easier to add the third addend. However, it is important to note that this may not always be the best strategy.

For example, if the addends are already in a convenient order, such as 25 + 35 + 40, then using the commutative property to rearrange the addends may actually make the problem more difficult to solve. It is important to consider the specific problem and use the strategy that makes the most sense in that context.

For more questions on commutative property

https://brainly.com/question/28094056

#SPJ8

The last step using the product rule involves applying the rule to the given functions f=1+x and g=y. The product rule states that (f g)' = f'.g + f.g'.

To get to the last step using the product rule, we first start with the equation v' (1+x) +y=v7. We then apply the product rule, which states that (f g)'=f'.g+f.g'. In this case, f=1+x and g=y. So we have f'=1 and g'=y'. Plugging these values into the product rule formula, we get y' (1+x) +y=((1 + x)y)'. Finally, we simplify the right-hand side by distributing the derivative to both terms inside the parentheses, which gives us VT = X. This last step simply represents the final result obtained after applying the product rule and simplifying the equation.  In this case, f'=1 (as the derivative of 1+x is 1) and g'=y' (since y is a function of x). Applying the product rule, you get (1+x)y' = (1+x)y'. This is simplified as y'(1+x) + y = ((1+x)y)'. The final equation is ((1+x)y)' = v'(1+x) + y, which represents the last step using the product rule.

To learn more about product rule, visit:

https://brainly.com/question/28789914

#SPJ11

We can conclude that the series Σ((-1)^(k+1))/((k^2 + 17)^(1/k)) converges by the Alternating Series Test.

The Alternating Series Test is applicable to this series because the terms alternate in sign. In this case, the terms are of the form (-1)^(k+1)/((k^2 + 17)^(1/k)). Additionally, the absolute value of the terms approaches 0 as k approaches infinity. This is because the denominator (k^2 + 17)^(1/k) approaches 1 as k goes to infinity, and the numerator (-1)^(k+1) alternates between -1 and 1. Thus, the absolute value of the terms approaches 0.

Furthermore, the absolute value of the terms is decreasing. Each term has a decreasing denominator (k^2 + 17)^(1/k), and the numerator (-1)^(k+1) alternates in sign. As a result, the absolute value of the terms is decreasing. Therefore, based on the Alternating Series Test, we can conclude that the series Σ((-1)^(k+1))/((k^2 + 17)^(1/k)) converges.

Learn more about Alternating Series Test here: https://brainly.com/question/30400869

#SPJ11

For the given equation, the values of a and b that satisfy the equation are a = 3 and b = -1. For the given system of equations, the solution can be found using the inverse matrix method and Cramer's rule.

Using the inverse matrix method, we find x = 1, y = 2, and z = 3. Using Cramer's rule, we find x = 1, y = 2, and z = 3 as well.

For the equation 2[a -4 1 b] -5[1 -3 2 1] = [11 7 2 -8 3], we can expand it to obtain the following system of equations:

2(a - 4) - 5(1) = 11

2(1) - 5(-3) = 7

2(2) - 5(1) = 2

2(b) - 5(1) = -8

2(a - 4) - 5(3) = 3

Simplifying these equations, we get:

2a - 8 - 5 = 11

2 + 15 = 7

4 - 5 = 2

2b - 5 = -8

2a - 22 = 3

Solving these equations, we find a = 3 and b = -1.

For the system of equations x+y+2z=9, 2x+4y=3z=1, and 3x+6y-5z=0, we can use the inverse matrix method to find the solution. By representing the system in matrix form as AX = B, where A is the coefficient matrix, X is the variable matrix, and B is the constant matrix, we can find the inverse of A and calculate X.

Using Cramer's rule, we can calculate the determinant of A and the determinants of matrices formed by replacing each column of A with B. Dividing these determinants, we find the values of x, y, and z.

Using both methods, we find x = 1, y = 2, and z = 3 as the solution to the system of equations.

Learn more about Cramer's rule here:

https://brainly.com/question/30682863

#SPJ11

The answers are A. The limit of f(x) as (x approaches 0 is positive infinity and B. The function has a jump discontinuity at x = 0.

(a) To compute the limit of f(x) as x approaches 0, we substitute x = 0 into the function:

[tex]\[\lim_{x \to 0} f(x) = \lim_{x \to 0} \left(\frac{(x+10)^2 - 100}{x^2}\right)\][/tex]

Since both the numerator and denominator approach 0 as x approaches 0, we have an indeterminate form of [tex]\(\frac{0}{0}\)[/tex]. We can apply L'Hôpital's rule to find the limit. Differentiating the numerator and denominator with respect to x, we get:

[tex]\[\lim_{x \to 0} \frac{2(x+10)}{2x} = \lim_{x \to 0} \frac{x+10}{x} = \frac{10}{0}\][/tex]

The limit diverges to positive infinity, as the numerator approaches a positive value while the denominator approaches 0 from the right side. Therefore, the limit of f(x) as x approaches 0 is positive infinity.

(b) The function f(x) is not continuous at x = 0. This is because the limit of f(x) as x approaches 0 is not finite. The function has a vertical asymptote at x = 0 due to the division by [tex]x^2[/tex]. As x approaches 0 from the left side, the function approaches negative infinity, and as x approaches 0 from the right side, the function approaches positive infinity.

Therefore, the function has a jump discontinuity at x = 0.

To learn more about discontinuity from the given link

https://brainly.com/question/9837678

#SPJ4

The probability that the first "4" will be the 8th digit generated on the TI-83 calculator is approximately 0.048, as calculated using the geometric probability formula. (option c)

To explain this calculation, we can consider the probability of generating a "4" on a single trial. Since the student is randomly generating 1-digit numbers, there are a total of 10 possible outcomes (0 to 9), and only one of these outcomes is a "4". Therefore, the probability of generating a "4" on any given trial is 1/10 or 0.1.

Since the student is generating digits one at a time, we can model the situation as a geometric distribution. The probability that the first success (i.e., the first "4") occurs on the kth trial is given by the geometric probability formula: P(X=k) = (1-p)^(k-1) * p, where p is the probability of success and k is the number of trials.

In this case, we want to find the probability that the first "4" occurs on the 8th trial. So we plug in p=0.1 and k=8 into the formula: P(X=8) = (1-0.1)^(8-1) * 0.1 = 0.9^7 * 0.1 ≈ 0.0478.

Therefore, the probability that the first "4" will be the 8th digit generated is approximately 0.048, which corresponds to option (c) in the given choices.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The value of the definite integral ∫[0,3] dx = x^2 + 1 is 3.

To evaluate the definite integral ∫[0,3] dx = x^2 + 1, we can apply the Fundamental Theorem of Calculus. According to the theorem, if F(x) is an antiderivative of f(x), then:

∫[a,b] f(x) dx = F(b) - F(a).

In this case, we have f(x) = 1, and its antiderivative F(x) = x. Therefore, we can evaluate the definite integral as follows:

∫[0,3] dx = F(3) - F(0) = 3 - 0 = 3.

So, the value of the definite integral ∫[0,3] dx = x^2 + 1 is 3.

To learn more about definite integral

https://brainly.com/question/22008756

#SPJ11

The equation of the line tangent to the graph of the function ƒ(x) = e*/3 at the point (3 ln 4, 4) is y - 4 = 4(x - 3 ln 4) / 3.

To find the equation of the tangent line, we need to determine the slope of the tangent at the given point. The slope of the tangent is equal to the derivative of the function at that point. In this case, the derivative of ƒ(x) = e*/3 is found using the chain rule, as follows:

ƒ'(x) = (1/3) * d/dx ([tex]e^{x}[/tex]/3)

Using the chain rule, we obtain:

ƒ'(x) = (1/3) * ([tex]e^{x}[/tex]/3) * (1/3)

At x = 3 ln 4, the slope of the tangent is:

ƒ'(3 ln 4) = (1/3) * ([tex]e^(3 ln 4)[/tex]/3) * (1/3)

Simplifying this expression, we have:

ƒ'(3 ln 4) = (1/3) * ([tex]4^{3}[/tex]/3) * (1/3) = 16/27

Now that we have the slope of the tangent, we can use the point-slope form of a line to find its equation. Plugging in the values (3 ln 4, 4) and the slope (16/27), we get:

y - 4 = (16/27)(x - 3 ln 4)

Simplifying further, we obtain:

y - 4 = (16/27)x - 16 ln 4/9

Multiplying both sides by 27 to eliminate the fraction, we have:

27(y - 4) = 16x - 16 ln 4

Finally, rearranging the equation to the standard form, we get:

16x - 27y = 16 ln 4 - 108

Thus, the equation of the line tangent to the graph of ƒ(x) = e*/3 at the point (3 ln 4, 4) is y - 4 = 4(x - 3 ln 4) / 3.

Learn more about Line tangent here:

https://brainly.com/question/31617205

#SPJ11

The area enclosed between f(x) = x² + 2x + 11 and g(x) = 2.22 - 2x - 1 is approximately 42.84 square units.

To find the area between the two functions, we need to determine the points of intersection. Setting f(x) equal to g(x), we have x² + 2x + 11 = 2.22 - 2x - 1.

Simplifying the equation gives us x² + 4x + 10.22 = 0.

To solve for x, we can use the quadratic formula: x = (-b ± √(b² - 4ac)) / (2a).

Using the coefficients from the quadratic equation, we find that x = (-4 ± √(4² - 4(1)(10.22))) / (2(1)).

Simplifying further, we get x = (-4 ± √(-23.16)) / 2.

Since the discriminant is negative, there are no real solutions. Therefore, the functions f(x) and g(x) do not intersect.

As a result, the region enclosed between f(x) and g(x) does not exist, and the area is equal to zero.

To learn more about functions click here

brainly.com/question/31062578                                                                                                                                                                    

#SPJ11

To approximate √8.1 using the second Taylor polynomial of f(x) = x^(1/3) centered at x = 8, we need to find the polynomial and evaluate it at x = 8.1.

The second Taylor polynomial of f(x) centered at x = 8 can be expressed as: P2(x) = f(8) + f'(8)(x - 8) + (f''(8)(x - 8)^2)/2!

First, let's find the first and second derivatives of f(x):

f'(x) = (1/3)x^(-2/3)

f''(x) = (-2/9)x^(-5/3)

Now, evaluate f(8) and the derivatives at x = 8:

f(8) = 8^(1/3) = 2

f'(8) = (1/3)(8^(-2/3)) = 1/12

f''(8) = (-2/9)(8^(-5/3)) = -1/216

Plug these values into the second Taylor polynomial:

P2(x) = 2 + (1/12)(x - 8) + (-1/216)(x - 8)^2

To approximate √8.1, substitute x = 8.1 into the polynomial:

P2(8.1) ≈ 2 + (1/12)(8.1 - 8) + (-1/216)(8.1 - 8)^2

Calculating this expression will give us the approximation for √8.1 using the second Taylor polynomial of f(x) centered at x = 8.

Learn more about polynomial  here: brainly.com/question/6203072

#SPJ11

The polynomial formed using the stated procedure is

y = 5x³ - 7x² - 3x + 2

Let's choose the following integer values for a, b, c, and d, following the rules as in the problem

a = 5

b = -7

c = -3

d = 2

Using these values we can write the function as follows

y = ax³ + bx² + cx + d, this is a cubic function

Substituting the chosen values, we have:

y = 5x³ - 7x² - 3x + 2

So the polynomial function with the chosen values is:

y = 5x³ - 7x² - 3x + 2

Learn more about polynomial function at

https://brainly.com/question/2833285

#SPJ4

To find the volume of the solid obtained by rotating the region bounded by the curves x+y=2 and [tex]x=3-(y-1)^2[/tex] about the z-axis, we can use the method of cylindrical shells.Evaluating this integral will give you the volume of the solid obtained by rotating the region about the z-axis.

First, let's find the limits of integration. We can set up the integral with respect to y, integrating from the lower bound to the upper bound of the region. The lower bound is where the curves intersect, which is y=1. The upper bound is the point where the curve [tex]x=3-(y-1)^2[/tex] intersects with the line x=0. Solving this equation, we get y=2.

Now, let's find the height of each cylindrical shell. Since we are rotating about the z-axis, the height of each shell is given by the difference in x-coordinates between the two curves. It is equal to the value of x on the curve [tex]x=3-(y-1)^2.[/tex]

The radius of each shell is the distance from the z-axis to the curve x=3-[tex](y-1)^2[/tex], which is simply x.

Therefore, the volume of the solid can be calculated by integrating the expression 2πxy with respect to y from y=1 to y=2:

Volume =[tex]∫(1 to 2) 2πx(3-(y-1)^2) dy[/tex]

Evaluating this integral will give you the volume of the solid obtained by rotating the region about the z-axis.

To know more about cylindrical click the link below:

brainly.com/question/31688422

#SPJ11

To find the value of ay at the point (2, 2), given z = tan^(-1)(11), u = 2y - x, and v = 3x - y, we need to differentiate z with respect to y and then substitute the given values. The result will give us the value of ay at the specified point.

We are given z = tan^(-1)(11), u = 2y - x, and v = 3x - y. To find the value of ay, we need to differentiate z with respect to y. The derivative of z with respect to y can be found using the chain rule.

Using the chain rule, we have dz/dy = dz/du * du/dy. First, we differentiate z with respect to u to find dz/du. Since z = tan^(-1)(11), the derivative dz/du will be 1/(1 + 11^2) = 1/122. Next, we differentiate u = 2y - x with respect to y to find du/dy, which is simply 2.

Now, we can substitute the given values of x and y, which are (2, 2). Plugging these values into du/dy and dz/du, we get du/dy = 2 and dz/du = 1/122.

Finally, we calculate ay by multiplying dz/du and du/dy: ay = dz/dy = (dz/du) * (du/dy) = (1/122) * 2 = 1/61.

Therefore, at the point (2, 2), the value of ay is 1/61.

Learn more about derivative here:

https://brainly.com/question/29144258

#SPJ11

To find the rate at which the volume is changing at a given time, we can differentiate the equation PV = 8.31T with respect to time (t), using the chain rule.

This will allow us to find an expression that relates the rates of change of P, V, and T.

Differentiating both sides of the equation with respect to time (t):

d(PV)/dt = d(8.31T)/dt

Using the product rule on the left side, and noting that P, V, and T are all functions of time (t):

V * dP/dt + P * dV/dt = 8.31 * dT/dt

We are given the following information:

- dT/dt = 0.15 K/s (rate of change of temperature)

- P = 29 kPa (pressure)

- dP/dt = 0.03 kPa/s (rate of change of pressure)

Substituting these values into the equation, we can solve for dV/dt:

V * (0.03 kPa/s) + (29 kPa) * dV/dt = 8.31 * (0.15 K/s)

Multiply and simplify:

0.03V + 29dV/dt = 1.2465

to know more about expression visit:

brainly.com/question/14083225

#SPJ11

There is no solution for x that satisfies g(x) = k(x). The functions [tex]g(x) = 2e^{(-x)}[/tex] and k(x) = [tex]e^x[/tex] do not intersect.

To solve for x when g(x) = k(x), we can set the two functions equal to each other and solve for x algebraically.

g(x) = k(x)

[tex]2e^{(-x)} = e^x[/tex]

To simplify the equation, we can divide both sides by [tex]e^x[/tex]:

[tex]2e^{(-x)} / e^x[/tex] = 1

Using the properties of exponents, we can simplify the left side of the equation:

[tex]2e^{(-x + x)}[/tex] = 1

2[tex]e^0[/tex] = 1

2 = 1

This is a contradiction, as 2 is not equal to 1. Therefore, there is no solution for x that satisfies g(x) = k(x).

In other words, the functions g(x) = [tex]2e^{(-x)}[/tex] and k(x) = [tex]e^x[/tex] do not intersect or have any common values of x. They represent two distinct exponential functions with different growth rates.

Hence, the equation g(x) = k(x) does not have a solution in the real number system. The functions g(x) and k(x) do not coincide or intersect on any value of x.

Learn more about intersection:

https://brainly.com/question/11337174

#SPJ11

Ms Kwena saved R1,839.12 in February, the total income (A) was R25,686, the difference between income and expenditure was R3,069.12, the percentage of income spent on food was approximately 1.55%, and even with a 19% increase in electricity expense, the income (R25,686) is still greater than the new total expenditure (R22,844.88).

We have,

To calculate the answers to the questions based on Table 1:

How much did Ms Kwena save in February?

To determine the amount saved, we need to subtract the total expenditure from the total income:

Savings = Total Income - Total Expenditure

Savings = R24,456 - R22,616.88

Savings = R1,839.12

Ms Kwena saved R1,839.12 in February.

Calculate the value of A, total income.

From Table 1, we can see that A represents different sources of income.

To find the total income (A), we add up all the income sources mentioned:

Total Income (A) = Salary + Interest from investments

Total Income (A) = R24,456 + R1,230

Total Income (A) = R25,686

The total income (A) for Ms Kwena in February is R25,686.

Calculate the difference between the income and the expenditure.

To calculate the difference between income and expenditure, we subtract the total expenditure from the total income:

Difference = Total Income - Total Expenditure

Difference = R25,686 - R22,616.88

Difference = R3,069.12

The difference between the income and the expenditure is R3,069.12.

Calculate the percentage of the income spent on food.

To calculate the percentage of the income spent on food, we divide the amount spent on food by the total income and multiply by 100:

Percentage spent on food = (Amount spent on food / Total Income) * 100

Percentage spent on food = (R399 / R25,686) * 100

Percentage spent on food ≈ 1.55%

Approximately 1.55% of the income was spent on food.

The electricity increased by 19%. All other expenses and the income remained the same. Would the income still be greater than the expenses? Show all your calculations.

Let's calculate the new electricity expense after a 19% increase:

New Electricity Expense = Electricity Expense + (Electricity Expense * 19%)

New Electricity Expense = R1,200 + (R1,200 * 0.19)

New Electricity Expense = R1,200 + R228

New Electricity Expense = R1,428

Now, let's recalculate the total expenditure with the new electricity expense:

New Total Expenditure = Total Expenditure - Electricity Expense + New Electricity Expense

New Total Expenditure = R22,616.88 - R1,200 + R1,428

New Total Expenditure = R22,844.88

The new total expenditure is R22,844.88.

Since the income (R25,686) is still greater than the new total expenditure (R22,844.88), the income would still be greater than the expenses even with the increased electricity expense.

Thus,

Ms Kwena saved R1,839.12 in February, the total income (A) was R25,686, the difference between income and expenditure was R3,069.12, the percentage of income spent on food was approximately 1.55%, and even with a 19% increase in electricity expense, the income (R25,686) is still greater than the new total expenditure (R22,844.88).

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ1

The expression represents an actuarial mathematics calculation related to the present value of a cash flow.

The given expression involves various elements of actuarial mathematics. The term "S:30" represents the survival probability at age 30, while "-0.060 e^(-0.12t)" accounts for the discount factor over time. The integral "tP[30]4[30]+tdt" denotes the annuity payments from age 30 to age 34, and the term "(S!! t=5 tP[30]H[30]+edt)2" represents the squared integral of annuity payments from age 30 to age 34. These components combine to calculate the present value of certain cash flows, incorporating mortality and interest factors.

In addition, the second part of the expression "6,500 S120° 1.0" introduces different variables. "6,500" represents a cash amount, "S120°" denotes the survival probability at age 120, and "1.0" represents a fixed factor. These variables contribute to the calculation, possibly involving the present value of a future cash amount adjusted for survival probability and other factors. The specific context or purpose of this calculation may require further information to fully understand its implications in actuarial mathematics.

Learn more about Calculation : brainly.com/question/30781060

#SPJ11

The Product Rule is used to differentiate the product of two functions, the Quotient Rule is used for differentiating the quotient of two functions, and the Chain Rule is used to differentiate composite functions.

The derivative of a function can be found using a combination of derivative rules depending on the form of the function.

For example, to differentiate a product of two functions, f(x) and g(x), we can use the Product Rule: d(fg)/dx = f'(x)g(x) + f(x)g'(x).

To differentiate a quotient of two functions, f(x) and g(x), we can use the Quotient Rule: d(f/g)/dx = (f'(x)g(x) - f(x)g'(x))/[g(x)]².

For composite functions, where one function is applied to another, we use the Chain Rule: d(f(g(x)))/dx = f'(g(x))g'(x).

By applying these rules, along with basic derivative rules for elementary functions such as power, exponential, and trigonometric functions, we can find the derivative of a function. The specific combination of rules used depends on the structure of the given function, allowing us to simplify and differentiate it appropriately.

Learn more about Quotient Rule here:

https://brainly.com/question/30278964

#SPJ11

The definite integral of (x² - 4x + 9) dx is 119.

Consider the given theorem which states that if a function f is integrable on the interval [a, b], then the definite integral of f(x) with respect to x over the interval [a, b] can be evaluated using the limit of a Riemann sum. In this case, we need to evaluate the definite integral of (x² - 4x + 9) dx.

To apply the theorem, we first identify the integrable function as f(x) = x² - 4x + 9. We are given the interval [a, b] in the problem, but it is not explicitly stated. Let's assume it to be [0, 3] for the purpose of this explanation.

In the Riemann sum expression, Ax represents the width of each subinterval, and x₁ represents the starting point of each subinterval. To evaluate the definite integral, we can take the limit of the sum as the number of subintervals approaches infinity.

The value of Ax can be calculated as [tex]\frac{(b - a) }{ n}[/tex], where n represents the number of subintervals. In our case, with [a, b] being [0, 3], Ax = [tex]\frac{(3 - 0) }{ n}[/tex][tex]\frac{(3 - 0) }{ n}[/tex].

Next, we calculate x₁ for each subinterval using the formula x₁ = a + iAx. Substituting the values, we have x₁ = 0 +  [tex]\iota(\frac{3}{n})[/tex].

Now, we form the Riemann sum expression: Σ f(x₁)Ax, where the summation is taken over all subintervals. Since we have a quadratic function, the value of f(x) = x² - 4x + 9 for each x₁.

Taking the limit as n approaches infinity, we can evaluate the definite integral by applying the given theorem. In this case, the resulting value is 119.

Learn more about definite integrals, Riemann sums, and the concept of limits in calculus.

brainly.com/question/30376867

#SPJ11

Answer:

12 square root 6

Step-by-step explanation:

45=X and 90=x square root 2

so if X = 12 square root 3 then you add the square root 2 from the 90 and that will end up giving you 12 square root 6

Ay dy at x = 1 and dx = 0.f(x) = 2x² + 1 and dy Ay dy a x= 1 and dx=0.1 a

based on the given information, it appears that you want to find the approximate change in the function f(x) = 2x² + 1

when x changes from 1 to 1.1 (a change of dx = 0.1) and dy is the notation for this change.

to calculate ay dy, we can use the formula for the differential of a function:

ay dy = f'(x) * dx

first, let's find the derivative of f(x):

f'(x) = d/dx (2x² + 1)       = 4x

now, we can substitute the values into the formula:

ay dy = f'(x) * dx

     = 4x * dx

at x = 1 and dx = 0.1:

ay dy = 4(1) * 0.1      = 0.4 1 is equal to 0.4.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11