Find the measure of 21. a) 50 b) 60 c70 d) 80 2) Find x a) 35° b) 180° C 18° d) 5°

The simplified form of the expression is:

(sin(x) + 2sin(x)cos(x)) / (cos²(x) + cos(x) - 1)

Simplifying the numerator:

Using the identity sin(2x) = 2sin(x)cos(x)

sin x + sin 2x = sin(x) + 2sin(x)cos(x)

Simplifying the denominator:

Using the identity cos(2x) = cos²(x) - sin²(x).

Now, let's substitute the simplified numerator and denominator back into the expression:

= (sin(x) + 2sin(x)cos(x)) / (cos(x) - cos²(x) - sin²(x).)

Next, let's use the Pythagorean identity sin²(x) + cos²(x) = 1 to simplify the denominator further:

(sin(x) + 2sin(x)cos(x)) / (cos(x) - (1 - cos²(x)))

(sin(x) + 2sin(x)cos(x)) / (cos(x) - 1 + cos²(x))

(sin(x) + 2sin(x)cos(x)) / (cos²(x) + cos(x) - 1)

Thus, the simplified form of the expression is:

(sin(x) + 2sin(x)cos(x)) / (cos²(x) + cos(x) - 1)

Learn more about Trigonometric Identities here:

https://brainly.com/question/24377281

#SPJ1

The function f(x) has a discontinuity at x = -2. Whether there is a discontinuity at x = -1 cannot be determined without additional information.

The function f(x) is defined as follows:

f(x) =

3x + 5 if x < -2

3x^2 + 34 if x >= -2

To determine the discontinuities, we look for points where the function changes its behavior abruptly or is not defined.

1. Discontinuity at x = -2:

At x = -2, there is a jump in the function. On the left side of -2, the function is defined as 3x + 5, while on the right side of -2, the function is defined as 3x^2 + 34. Therefore, there is a discontinuity at x = -2.

2. Discontinuity at x = -1: at x = -1. It depends on the behavior of the function at that point.

Learn more about function f(x) here:

https://brainly.com/question/28887915

#SPJ11

Given sin A = -21/29 and sin B = 12/37, we can calculate the sum of sin A and sin B by adding the given values.

To find the sum of sin A and sin B, we can simply add the given values of sin A and sin B.

sin A + sin B = (-21/29) + (12/37)

To add these fractions, we need to find a common denominator. The least common multiple of 29 and 37 is 29 * 37 = 1073. Multiplying the numerators and denominators accordingly, we have:

sin A + sin B = (-21 * 37 + 12 * 29) / (29 * 37)

            = (-777 + 348) / (1073)

            = -429 / 1073

The sum of sin A and sin B is -429/1073.

To simplify this fraction, we can divide both the numerator and the denominator by their greatest common divisor (GCD), which is 11 in this case:

sin A + sin B = (-429/11) / (1073/11)

            = -39/97

Therefore, the sum of sin A and sin B is -39/97.

To learn more about sin  Click Here: brainly.com/question/19213118

#SPJ11

Given the expression, $f(x) = 2x +1$ and $g(x) = 22 +1 In$ and we need to find the functions f and g, for Exercises 35, 36, 37, 38, 39, 40, 41 and 42.

Given the expression, $f(x) = 2x +1$ and $g(x) = 22 +1 In$ and we need to find the functions f and g, for Exercises 35, 36, 37, 38, 39, 40, 41 and 42.Exercise 36f(x) = 2x + 1g(x) = 22 + 1 InSince In is not attached to any variable in the expression g(x), the expression g(x) should be $g(x) = 22 + 1\cdot\ln{x}$When x = 1, f(x) = $2\cdot1 + 1 = 3$g(x) = $22 + 1\cdot\ln{1} = 22$Thus, the required functions are; $f(x) = 2x+1$ and $g(x) = 22 + \ln{x}$, where x > 0.

learn more about $g(x) = 22 +1 here;

https://brainly.com/question/28898478?

#SPJ11

<IHE and <DEH are alternate interior angles.

We know, Alternate interior angles are a pair of angles that are formed on opposite sides of a transversal and are located between the lines being intersected. These angles are congruent or equal in measure.

In other words, if two parallel lines are intersected by a transversal, the alternate interior angles will have the same measure. They are called "alternate" because they are located on alternate sides of the transversal.

Since, DF || GI then

angle GHJ and angle DEC - Angle on same side

angle FEH and angle IHJ - Corresponding Angle

angle IHJ and angle FEC - Angle on same side

angle IHE and angle DEH - Alternate interior angle

Learn more about Alternate interior angle here:

https://brainly.com/question/29114209

#SPJ1

The Complete question is:

Which angles are alternate interior angles?

angle GHJ and angle DEC

angle FEH and angle IHJ

angle IHJ and angle FEC

angle IHE and angle DEH

a. The number of strings containing at least one pair of adjacent characters that are the same is 4^n - 4 * 3^(n-1), where n is the length of the string. b. The probability that a randomly chosen string of length ten over {a, b, c, d} contains at least one pair of adjacent characters that are the same is approximately 0.6836.

a. To count the number of strings of length n over the set {a, b, c, d} that contain at least one pair of adjacent characters that are the same, we can use the principle of inclusion-exclusion.

Let's denote the set of all strings of length n as S and the set of strings without any adjacent characters that are the same as T. The total number of strings in S is given by 4^n since each character in the string can be chosen from the set {a, b, c, d}.

Now, let's count the number of strings without any adjacent characters that are the same, i.e., the size of T. For the first character, we have 4 choices. For the second character, we have 3 choices (any character except the one chosen for the first character). Similarly, for each subsequent character, we have 3 choices.

Therefore, the number of strings without any adjacent characters that are the same, |T|, is given by |T| = 4 * 3^(n-1).

Finally, the number of strings that contain at least one pair of adjacent characters that are the same, |S - T|, can be obtained using the principle of inclusion-exclusion:

|S - T| = |S| - |T| = 4^n - 4 * 3^(n-1).

b. To find the probability that a randomly chosen string of length ten over {a, b, c, d} contains at least one pair of adjacent characters that are the same, we need to divide the number of such strings by the total number of possible strings.

The total number of possible strings of length ten is 4^10 since each character in the string can be chosen from the set {a, b, c, d}.

Therefore, the probability is given by:

Probability = |S - T| / |S| = (4^n - 4 * 3^(n-1)) / 4^n

For n = 10, the probability would be:

Probability = (4^10 - 4 * 3^9) / 4^10 ≈ 0.6836

To know more about probability,

https://brainly.com/question/29689698

#SPJ11

The derivative of h(x) is h'(x) = e²-12 + 3e^(-³x) + 2/(5(²+3)), and this is the simplified answer.

To differentiate the function h(x) = -17 + e²-12 + 4/155 - e^(-³x) + ln(²+3)/5, we will use the properties of logarithms and the rules of differentiation. Let's break down the function and differentiate each term separately:

The first term, -17, is a constant, and its derivative is 0.

The second term, e²-12, is a constant multiplied by the exponential function e^x. The derivative of e^x is e^x, so the derivative of e²-12 is e²-12.

The third term, 4/155, is a constant, and its derivative is 0.

The fourth term, e^(-³x), is an exponential function. To differentiate it, we use the chain rule. The derivative of e^(-³x) is given by multiplying the derivative of the exponent (-³x) by the derivative of the exponential function e^x. The derivative of -³x is -3, and the derivative of e^x is e^x. Therefore, the derivative of e^(-³x) is -3e^(-³x).

The fifth term, ln(²+3)/5, involves the natural logarithm. To differentiate it, we use the chain rule. The derivative of ln(u) is given by multiplying the derivative of u by 1/u. In this case, the derivative of ln(²+3) is 1/(²+3) multiplied by the derivative of (²+3). The derivative of (²+3) is 2. Therefore, the derivative of ln(²+3) is 2/(²+3).

Now, let's put it all together and simplify the result:

h'(x) = 0 + e²-12 + 0 - (-3e^(-³x)) + (2/(²+3))/5.

Simplifying further:

h'(x) = e²-12 + 3e^(-³x) + 2/(5(²+3)).

Learn more about derivative at: brainly.com/question/29144258

#SPJ11

The second plot that could not always be generated from a dot plot is a histogram. Thee correct option is c) dot plot, histogram.

A histogram is a graphic depiction of a frequency distribution with continuous classes that has been grouped. It is an area diagram, which is described as a collection of rectangles with bases that correspond to the distances between class boundaries and areas that are proportionate to the frequencies in the respective classes.

The second plot that could not always be generated from the first plot in each pair is:

c) dot plot, histogram

A dot plot is a type of plot where each data point is represented by a dot along a number line. It shows the frequency or distribution of a dataset.

A histogram, on the other hand, represents the distribution of a dataset by dividing the data into intervals or bins and displaying the frequencies or relative frequencies of each interval as bars.

While a dot plot can be converted into a histogram by grouping the data points into intervals and representing their frequencies with bars, it is not always possible to reverse the process and generate a dot plot from a histogram. This is because a histogram does not provide the exact positions of individual data points, only the frequencies within intervals.

Therefore, the second plot that could not always be generated from a dot plot is a histogram.

Learn more about histogram on:

https://brainly.com/question/2962546

#SPJ4

Answer:

x=47

Step-by-step explanation:

because the total angles for the triangle are 180

so 31+102=133

so 180-133= 47

No, y = 3x - 20 – 3 is not a solution to the initial value problem [tex]y' - 3y = 6x + 7[/tex] with y(0) = -2.

To determine if y = 3x - 20 – 3 is a solution to the given initial value problem, we need to substitute the values of y and x into the differential equation and check if it holds true. First, let's find the derivative of y with respect to x, denoted as y':

y' = d/dx (3x - 20 – 3)

  = 3.

Now, substitute y = 3x - 20 – 3 and y' = 3 into the differential equation:

3 - 3(3x - 20 – 3) = 6x + 7.

Simplifying the equation, we have:

3 - 9x + 60 + 9 = 6x + 7,

72 - 9x = 6x + 7,

15x = 65.

Solving for x, we find x = 65/15 = 13/3. However, this value of x does not satisfy the initial condition y(0) = -2, as substituting x = 0 into y = 3x - 20 – 3 yields y = -23. Since the given solution does not satisfy the differential equation and the initial condition, it is not a solution to the initial value problem. Therefore, the correct answer is No.

Learn more about initial value problem here:

https://brainly.com/question/30466257

#SPJ11

By integrating the marginal cost function and adding the fixed costs, we can find the total cost to produce 40 items.

The total cost to produce 40 items can be determined by integrating the marginal cost function and adding the fixed costs. By evaluating the integral and adding the fixed costs, we can find the total cost to produce 40 items, rounding the answer to the nearest integer.

The marginal cost function is given by C′(q) = q² - 40q + 700, where q represents the quantity of items produced. To find the total cost, we need to integrate the marginal cost function to obtain the cost function, and then evaluate it at the quantity of interest, which is 40.

Integrating the marginal cost function C′(q) with respect to q, we obtain the cost function C(q) = (1/3)q³ - 20q² + 700q + C, where C is the constant of integration.

To determine the constant of integration, we use the given information that fixed costs are $500. Since fixed costs do not depend on the quantity of items produced, we have C(0) = 500, which gives us the value of C.

Now, substituting q = 40 into the cost function C(q), we can calculate the total cost to produce 40 items. Rounding the answer to the nearest integer gives us the final result.

Therefore, by integrating the marginal cost function and adding the fixed costs, we can find the total cost to produce 40 items.

Learn more about integration here:

https://brainly.com/question/31059545

#SPJ11

P = (r/1,200)(1+r/1,200)^n / [(1+r/1,200)^n - 1]
Option A is the correct answer of this question.

The formula given can be used to calculate the monthly payment needed to pay off a loan of P dollars at r percent annual interest over N months. To find P in terms of m, r, and N, we need to rearrange the formula to isolate P.
The answer is (r/1,200)(1+r/1,200)^n / (1+ r/1,200)^n -1.

The given formula:
m=(r/1,200)(1+r/1,200)^n
_________________________________
(1+r/1,200)^n -1

We can multiply both sides by the denominator to get rid of the fraction:

m(1+r/1,200)^n - m = (r/1,200)(1+r/1,200)^n

Then we can add m to both sides:

m(1+r/1,200)^n = (r/1,200)(1+r/1,200)^n + m

Next, we can divide both sides by (1+r/1,200)^n to isolate m:

m = [(r/1,200)(1+r/1,200)^n + m] / (1+r/1,200)^n

Now we can subtract m from both sides:

m - m(1+r/1,200)^n = (r/1,200)(1+r/1,200)^n

And factor out m:

m [(1+r/1,200)^n - 1] = (r/1,200)(1+r/1,200)^n

Finally, we can divide both sides by [(1+r/1,200)^n - 1] to get P:

P = (r/1,200)(1+r/1,200)^n / [(1+r/1,200)^n - 1]

Option A is the correct answer of this question.

Learn more about percent annual interest here:

https://brainly.com/question/29217143

#SPJ11

The problem involves choosing 3 balls without replacement from an urn with 5 white and 8 red balls. We need to find the joint probability mass function of X1 and X2, the marginal pmf of X1, the conditional pmf of X1 given X2 = 1, and calculate E[X1|X2 = 1] and E[X1 + X2].

(a) To find the joint probability mass function of X1 and X2, we need to determine the probability of each combination of X1 and X2 values. Since X1 represents the color of the first ball chosen and X2 represents the color of the second ball chosen, there are four possible outcomes: (X1=0, X2=0), (X1=0, X2=1), (X1=1, X2=0), and (X1=1, X2=1). The probabilities for each outcome can be calculated by considering the number of white and red balls in the urn and the total number of balls remaining after each selection.

(b) The marginal pmf of X1 is obtained by summing the joint probabilities of X1 across all possible values of X2. In this case, we need to sum the probabilities for (X1=0, X2=0) and (X1=0, X2=1) to find the marginal pmf of X1.

(c) To find the conditional pmf of X1 given X2 = 1, we focus on the outcomes where X2 = 1 and calculate the probabilities of X1 for those specific cases. In this scenario, we consider only (X1=0, X2=1) and (X1=1, X2=1) since X2 = 1.

(d) The expected value of X1 given X2 = 1, denoted as E[X1|X2 = 1], is calculated by summing the product of each value of X1 and its corresponding conditional probability of X1 given X2 = 1.

(e) The expected value of X1 + X2 is obtained by summing the product of each value of X1 + X2 and its corresponding joint probability across all possible outcomes.

By performing the necessary calculations, we can find the solutions to these questions and understand the probabilities and expected values associated with the chosen balls from the urn.

Learn more about product here: https://brainly.com/question/30284183

#SPJ11

The p-series Σ and the geometric series converge for specific values of t. The p-series converges for t > 1, while the geometric series converges for |t| < 1. Therefore, the values of t that satisfy both conditions and make both series converge are t such that 0 < t < 1.

A p-series is a series of the form Σ(1/n^p), where n starts from 1 and goes to infinity. The p-series converges if and only if p > 1. In this case, the p-series is not explicitly defined, so we cannot determine the exact value of p. However, we know that the p-series converges when p is greater than 1. Therefore, the p-series will converge for t > 1.

On the other hand, a geometric series is a series of the form Σ(ar^n), where a is the first term and r is the common ratio. The geometric series converges if and only if |r| < 1. In the given series, n starts from 17^2t, which indicates that the common ratio is t. Therefore, the geometric series will converge for |t| < 1.

To find the values of t for which both series converge, we need to find the intersection of the two conditions. The intersection occurs when t satisfies both t > 1 (for the p-series) and |t| < 1 (for the geometric series). Combining the two conditions, we find that 0 < t < 1.

Learn more about geometric series here:

https://brainly.com/question/30264021

#SPJ11

The volume of the region R bounded by the curves[tex]24 + y^2 = 5[/tex]and[tex]y = 2x^2[/tex], with -1 ≤ x ≤ 1, is approximately 20.2 cubic units.

To evaluate the volume of the region R, we can set up a double integral in the xy-plane. The integral expresses the volume of the region R as the difference between the upper and lower boundaries in the y-direction.

The integral to evaluate the volume is given by:

∫∫R dV = ∫[from -1 to 1] ∫[from [tex]2x^2[/tex] to √(5-24+[tex]y^2[/tex])] dy dx

Simplifying the limits of integration, we have:

∫∫R dV = ∫[from -1 to 1] ∫[from [tex]2x^2[/tex] to √(5-24+ [tex]y^2[/tex])] dy dx

Now, we can evaluate the integral:

∫∫R dV = ∫[from -1 to 1] [√(5-24+[tex]y^2[/tex]) - [tex]2x^2[/tex]] dy dx

Evaluating the integral with respect to y, we get:

∫∫R dV = ∫[from -1 to 1] [√(5-24+ [tex]y^2[/tex]) - [tex]2x^2[/tex]] dy

Finally, evaluating the integral with respect to x, we obtain the final answer:

∫∫R dV = [from -1 to 1] ∫[from [tex]2x^2[/tex] to √(5-24+ [tex]y^2[/tex])] dy dx ≈ 20.2 cubic units.

Therefore, the volume of the region R is approximately 20.2 cubic units.

Learn more about integral here:

https://brainly.com/question/31433890

#SPJ11

The problem provides the cdf of a random variable X and asks for the pmf of X, the graphs of cdf and pdf, and the probabilities P(3 <= X <= 6) and P(X >= 4).

a. To find the probability mass function (pmf) of X, we need to calculate the difference in cumulative probabilities for each interval.

PMF of X:

P(X = 1) = F(1) - F(0) = 0.30 - 0 = 0.30

P(X = 2) = F(2) - F(1) = 0.40 - 0.30 = 0.10

P(X = 3) = F(3) - F(2) = 0.45 - 0.40 = 0.05

P(X = 4) = F(4) - F(3) = 0.60 - 0.45 = 0.15

P(X = 5) = F(5) - F(4) = 0.60 - 0.45 = 0.15

P(X = 6) = F(6) - F(5) = 1 - 0.60 = 0.40

P(X = 12) = F(12) - F(6) = 1 - 0.60 = 0.40

For all other values of X, the pmf is 0.

b. To sketch the graphs of the cumulative distribution function (cdf) and probability density function (pdf), we can plot the values of the cdf and represent the pmf as vertical lines at the corresponding X values.

cdf:

From x = 0 to x = 1, the cdf increases linearly from 0 to 0.30.

From x = 1 to x = 3, the cdf increases linearly from 0.30 to 0.40.

From x = 3 to x = 4, the cdf increases linearly from 0.40 to 0.45.

From x = 4 to x = 6, the cdf increases linearly from 0.45 to 0.60.

From x = 6 to x = 12, the cdf increases linearly from 0.60 to 1.

pdf:

The pdf represents the vertical lines at the corresponding X values in the pmf.

c. Using the cdf, we can compute the following probabilities:

P(3 ≤ X ≤ 6) = F(6) - F(3) = 1 - 0.45 = 0.55

P(X ≥ 4) = 1 - F(4) = 1 - 0.60 = 0.40

To know more about random variable,

https://brainly.com/question/30720414

#SPJ11

The answer explains the concept of line integrals and provides a specific practice problem to evaluate a line integral of a vector field.

It involves calculating the line integral (F·ds) along a given curve using the given vector field and endpoints.

Line integrals are used to calculate the total accumulation or work done along a curve. There are two types: scalar line integrals and line integrals of vector fields.

In this practice problem, we are given the vector field F = (-x, y) and asked to evaluate the line integral (F·ds) along the parabola x = y* from (0, 0) to (4, 2).

To evaluate the line integral, we first need to parameterize the given curve. Since the parabola is defined by the equation x = y^2, we can choose y as the parameter. Let's denote y as t, then we have x = t^2.

Next, we calculate ds, which is the differential arc length along the curve. In this case, ds can be expressed as ds = √(dx^2 + dy^2) = √(4t^2 + 1) dt.

Now, we can compute (F·ds) by substituting the values of F and ds into the line integral. We have (F·ds) = ∫[0,2] (-t^2)√(4t^2 + 1) dt.

To evaluate this integral, we can use appropriate integration techniques, such as substitution or integration by parts. By evaluating the integral over the given range [0, 2], we can find the numerical value of the line integral.

Learn more about integrals here:

https://brainly.com/question/31744185

#SPJ11

a. The cost of installing 60 ft² of countertop is $810000

b. The cost of installing an extra 16 ft² of countertop is $1275136

From the question, we have the following parameters that can be used in our computation:

c'(x) = x³/4

Integrate the marginal cost to get the cost function

c(x) = x⁴/(4 * 4)

So, we have

c(x) = x⁴/16

For 60 square feet, we have

c(60) = 60⁴/16

Evaluate

c(60) = 810000

So, the cost is 810000

An extra 16 ft² of countertop after 60 ft² have already been installed is

New area = 60 + 16

So, we have

New area = 76

This means that

Cost = C(76) - C(60)

So, we have

c(76) = 2085136

Next, we have

Extra cost = 2085136 - 810000

Evaluate

Extra cost = 1275136

Hence, the extra cost is 1275136

Read more about marginal cost at

https://brainly.com/question/17230008

#SPJ4

Question

The marginal cost (in dollars per square foot) of installing x square feet of kitchen countertop is given by c'(x) = x³/4

a) Find the cost of installing 60 ft2 of countertop.

b) Find the cost of installing an extra 16 ft2 of countertop after 60 ft2 have already been installed.

To find the volume of the solid in the first octant bounded by the coordinate planes and the plane 3x + 6y + 4z = 12, we can set up a triple integral over the region.

The equation of the plane is 3x + 6y + 4z = 12. To find the boundaries of the integral, we need to determine the values of x, y, and z that satisfy this equation and lie in the first octant.

In the first octant, x, y, and z are all non-negative. From the equation of the plane, we can solve for z:

z = (12 - 3x - 6y)/4

The boundaries for x and y are determined by the coordinate planes:

0 ≤ x ≤ (12/3) = 4

0 ≤ y ≤ (12/6) = 2

The boundaries for z are determined by the plane:

0 ≤ z ≤ (12 - 3x - 6y)/4

The triple integral to find the volume is:

∫∫∫ (12 - 3x - 6y)/4 dx dy dz

By evaluating this integral over the specified boundaries, we can determine the volume of the solid in the first octant bounded by the coordinate planes and the given plane.

Learn more about coordinate planes here:

https://brainly.com/question/14462788

#SPJ11

The dot product represents the directional derivative of f(x, y, z) in the direction of vector u at the point (1, 3, 2).

To find the directional derivative of the function f(x, y, z) = zy + x^4 at the point (1, 3, 2) in the direction of a vector making an angle of A with Vf(1, 3, 2), we need to follow these steps:

Compute the gradient vector of f(x, y, z):

∇f(x, y, z) = (∂f/∂x, ∂f/∂y, ∂f/∂z)

Taking the partial derivatives:

∂f/∂x = 4x^3

∂f/∂y = z

∂f/∂z = y

Therefore, the gradient vector is:

∇f(x, y, z) = (4x^3, z, y)

Evaluate the gradient vector at the point (1, 3, 2):

∇f(1, 3, 2) = (4(1)^3, 2, 3) = (4, 2, 3)

Define the direction vector u:

u = (cos(A), sin(A))

Compute the dot product between the gradient vector and the direction vector:

∇f(1, 3, 2) · u = (4, 2, 3) · (cos(A), sin(A))

= 4cos(A) + 2sin(A)

The result of this dot product represents the directional derivative of f(x, y, z) in the direction of vector u at the point (1, 3, 2).

To learn more about vector, refer below:

https://brainly.com/question/24256726

#SPJ11

To determine the expression "la – 25 + 37%," we need to substitute the given values of vector 'a' and scalar 'c' into the expression.

First, let's calculate 'la' using vector 'a':

la = l(-2i + 3j – 5k)l

[tex]= \sqrt{(-2)^2 + 3^2 + (-5)^2}\\= \sqrt{4 + 9 + 25}\\= \sqrt{38}[/tex]

Next, let's substitute the calculated value of 'la' into the expression:

la – 25 + 37%

[tex]= \sqrt{38} - 25 + (37/100)(\sqrt{38})\\=6.16 - 25 + 0.37(6.16)\\= 6.16 - 25 + 2.28\\= -16.56[/tex]

Therefore, la – 25 + 37% is approximately equal to -16.56.

The given expression seems unusual as it combines a vector magnitude (la) with scalar operations (- 25 + 37%). Typically, vector operations involve addition, subtraction, or dot/cross products with other vectors.

However, in this case, we treated 'a' as a vector and calculated its magnitude before performing the scalar operations.

To learn more about vector operations visit:

brainly.com/question/30635188

#SPJ11

Answer:

The solution to the differential equation is:

g(y) = -sec(e) x - f(0)

Step-by-step explanation:

To solve the given differential equation:

(e sin(y)) dy = sec(e) dx

We can separate the variables and integrate:

∫ (e sin(y)) dy = ∫ sec(e) dx

Integrating the left side with respect to y:

-g(y) = sec(e) x + C

Where C is the constant of integration.

To obtain the final solution in the desired form 'g(y) = f(0)', we can rearrange the equation:

g(y) = -sec(e) x - C

Since f(0) represents the value of the function g(y) at y = 0, we can substitute x = 0 into the equation to find the constant C:

g(0) = -sec(e) (0) - C

f(0) = -C

Therefore, the solution to the differential equation is:

g(y) = -sec(e) x - f(0)

Learn more about integration:https://brainly.com/question/30094386

#SPJ11

(A) To find the antiderivative of the function f(x) = x, we integrate with respect to x:∫ x dx = (1/2)x^2 + C,

where C is the constant of integration.

(B) Using the antiderivative we found in part (A), we can evaluate the definite integral: ∫[0, √(3y + x^2)] dx = [(1/2)x^2]∣[0, √(3y + x^2)].

Substituting the upper and lower limits of integration into the antiderivative, we have: [(1/2)(√(3y + x^2))^2] - [(1/2)(0)^2] = (1/2)(3y + x^2) - 0 = (3/2)y + (1/2)x^2.

Therefore, the value of the definite integral is (3/2)y + (1/2)x^2.

Learn more about antiderivative here: brainly.in/question/5528636
#SPJ11

To find the rules for the composite functions fog and gof, we need to substitute the expressions for f(x) and g(x) into the composition formulas.

For fog:

[tex]fog(x) = f(g(x)) = f(g(x)) = f(2x+1) = (2(2x+1))^2 + 1 = (4x+2)^2 + 1 = 16x^2 + 16x + 5.[/tex]

For gof:

[tex]gof(x) = g(f(x)) = g(f(x)) = g(x^2 + 1) = 2(x^2 + 1) + 1 = 2x^2 + 3.[/tex]

Therefore, the rules for the composite functions are:

[tex]fog(x) = 16x^2 + 16x + 5[/tex]

[tex]gof(x) = 2x^2 + 3.[/tex]

learn more about;- composite functions here

https://brainly.com/question/30660139

#SPJ11

To find the partial derivatives of the function f(x, y) = 2x² + y² + 2xy + 4x + 2y, we need to differentiate the function with respect to each variable while treating the other variable as a constant. fₓ = 4x + 2y + 4 fᵧ = 2y + 2x + 2 fₓᵧ = 2

Let's start by finding the partial derivative with respect to x, denoted as fₓ or ∂f/∂x: fₓ = ∂f/∂x = 4x + 2y + 4 To find the partial derivative with respect to y, denoted as fᵧ or ∂f/∂y: fᵧ = ∂f/∂y = 2y + 2x + 2

Finally, let's find the mixed derivative with respect to x and y, denoted as fₓᵧ or ∂²f/∂x∂y: fₓᵧ = ∂²f/∂x∂y = 2

The partial derivatives give us information about the rate of change of the function with respect to each variable. The first-order partial derivatives (fₓ and fᵧ) indicate how the function changes as we vary only one variable while keeping the other constant.

The mixed partial derivative (fₓᵧ) indicates how the rate of change of the function with respect to one variable is affected by the other variable. To summarize: fₓ = 4x + 2y + 4 fᵧ = 2y + 2x + 2 fₓᵧ = 2

Know more about function  here:

https://brainly.com/question/30721594

#SPJ11

The partial derivatives of the function f(x, y) = 2x² + y² + 2xy + 4x + 2yfₓ = 4x + 2y + 4 fᵧ = 2y + 2x + 2 fₓᵧ = 2.

Here, we have,

To find the partial derivatives of the function

f(x, y) = 2x² + y² + 2xy + 4x + 2y,

we need to differentiate the function with respect to each variable while treating the other variable as a constant.

fₓ = 4x + 2y + 4 fᵧ = 2y + 2x + 2 fₓᵧ = 2

Let's start by finding the partial derivative with respect to x, denoted as fₓ or ∂f/∂x: fₓ = ∂f/∂x = 4x + 2y + 4

To find the partial derivative with respect to y, denoted as fᵧ or ∂f/∂y:

fᵧ = ∂f/∂y = 2y + 2x + 2

Finally, let's find the mixed derivative with respect to x and y, denoted as fₓᵧ or ∂²f/∂x∂y: fₓᵧ = ∂²f/∂x∂y = 2

The partial derivatives give us information about the rate of change of the function with respect to each variable. The first-order partial derivatives (fₓ and fᵧ) indicate how the function changes as we vary only one variable while keeping the other constant.

The mixed partial derivative (fₓᵧ) indicates how the rate of change of the function with respect to one variable is affected by the other variable. To summarize: fₓ = 4x + 2y + 4 fᵧ = 2y + 2x + 2 fₓᵧ = 2

Know more about function  here:

brainly.com/question/30721594

#SPJ4

Answer:

[tex]\pi \times 39 \times 81 \times 2 = 9919.26[/tex]

Answer:

3.9375 inches²

Step-by-step explanation:

We Know

Area of rectangle = L x W

A rectangle measures 2 1/4 Inches by 1 3/4 inches.

2 1/4 = 9/4 = 2.25 inches

1 3/4 = 7/4 = 1.75 inches

What is its area?​

We Take

2.25 x 1.75 = 3.9375 inches²

So, the area is 3.9375 inches².

The answer explains how to calculate Riemann integrals for two different expressions.

The first expression is the integral of 3*cos(2x) with respect to x over the interval [1, 7/2]. The second expression is the integral of (x + 1) / (x^2 + 2x + 5) with respect to x over the interval [0, 4.2].

To calculate the Riemann integral of 3cos(2x) with respect to x over the interval [1, 7/2], we need to find the antiderivative of the function 3cos(2x) and evaluate it at the upper and lower limits. Then, subtract the values to find the definite integral.

Next, for the expression (x + 1) / (x^2 + 2x + 5), we can use partial fraction decomposition or other integration techniques to simplify the integrand. Once simplified, we can evaluate the antiderivative of the function and find the definite integral over the given interval [0, 4.2].

By substituting the upper and lower limits into the antiderivative, we can calculate the definite integral and obtain the numerical value of the Riemann integral for each expression.

Learn more about integration here:

https://brainly.com/question/31744185

#SPJ11

Answer:  The sale price is $5600.

Step-by-step explanation:

1. The original price(o) x the discount percent = the discount off the original price.

                o x 20% = 1400

                           o = 1400/20%

                           o = 1400/0.2

                           o = 7000

2. Original price(o) - discount off the original price = sale prices

   7000 - 1400 = 5600

To find the derivative of the function y = (cos(4x)), we can use logarithmic differentiation. The derivative of y can be expressed as y' = (cos(4x)) * ln(cos(4x)) – 4x * tan(4x).

To differentiate the given function y = (cos(4x)), we will use logarithmic differentiation. The process involves taking the natural logarithm of both sides of the equation and then differentiating implicitly.

Take the natural logarithm of both sides:

ln(y) = ln[(cos(4x))]

Differentiate both sides with respect to x using the chain rule:

(1/y) * y' = [(cos(4x))]' = -sin(4x) * (4x)'

Simplify and isolate y':

y' = y * [-sin(4x) * (4x)']

y' = (cos(4x)) * [-sin(4x) * (4x)']

Further simplify by substituting (4x)' with 4:

y' = (cos(4x)) * [-sin(4x) * 4]

Simplify the expression:

y' = (cos(4x)) * ln(cos(4x)) – 4x * tan(4x)

Thus, the derivative of y = (cos(4x)) is given by y' = (cos(4x)) * ln(cos(4x)) – 4x * tan(4x

Learn more about logarithm here: https://brainly.com/question/30226560

#SPJ11