Given the equation: PCs (g) PCI (g) + Ch (g) Initially, 0.0405M PCIs is added to an empty flask. Given the value
of the equilibrium constant, K, is 0.0121, calculate the equilibrium concentration of ALL three substances.

Show work.

This mistake would lead to inaccurate results because the unknown acid wasn't completely transferred into the flask. As a result, the recorded results won’t reflect the true acid concentration of the unknown acid.

In order to obtain accurate results, all of the unknown acid must be completely transferred into the flask before titrating with a NaOH solution that was correctly standardized.

When this step is not taken, the amount of acid titrated will not be an accurate representation of the unknown acid's concentration. This leads to a lower than expected titration result, which in turn leads to inaccurate results.

It is important to remember to transfer all of the unknown acid into the flask before titrating with a standardized NaOH solution. Doing so ensures that the titration results will accurately reflect the concentration of the unknown acid.

To know more about titration click on below link:

https://brainly.com/question/2728613#

#SPJ11

As temperature increases, vapor pressure of substance also increases due to an increase in  kinetic energy of the molecules. The correct answers are options: 1, 2, 3, 4.

As temperature increases, vapor pressure of a substance also increases due to an increase in  kinetic energy of molecules Substances with stronger intermolecular forces will have lower vapor pressure because it requires more energy to break bonds between molecules and transition into  gas phase. An increase in external pressure will decrease  vapor pressure. Molecular size and shape of a substance can affect intermolecular forces and therefore its vapor pressure. For example, larger molecules tend to have stronger intermolecular forces, which result in lower vapor pressures. Options are 1, 2, 3, 4  correct .

To know more about vapor pressures, here

brainly.com/question/26127294

#SPJ4

--The complete Question is, which of the following will affect the vapor pressure of a pure molecular substance?

select all that apply.

1. the external pressure

2. the structure of the substance

3. the strength of the intermolecular forces

4. the temperature

5. the weather conditions--

A cell must keep a similar concentration of dissolved substances with the fluid surrounding them because it helps in maintaining homeostasis.

Homeostasis is the ability of the body to regulate its internal environment in order to maintain a stable, constant condition. For example, the body regulates temperature, blood sugar levels, pH levels, and other factors to maintain a stable internal environment.

When there is an imbalance in the concentration of dissolved substances between the cell and its surrounding fluid, the cell is at risk of losing or gaining too much water. This can cause the cell to swell or shrink, which can interfere with its normal functions.

To maintain homeostasis, the cell needs to regulate the movement of substances across its membrane in response to changes in the concentration of dissolved substances in the surrounding fluid. By doing so, the cell can maintain a stable internal environment and function properly.

For more question on homeostasis click on

https://brainly.com/question/13127022

#SPJ11

The VSEPR model explains that each atom in a molecule with a central atom will achieve a geometry of the molecule which minimizes the repulsion between electrons of the molecule in the valence shell of that atom.

VSEPR Model can be used to predict the structure of any molecule with a central metal atom present in it. In the polyatomic molecules which is the molecules made up of three or more atoms and one of the constituent atoms is determined as the central atom to which all other atoms belonging to the molecule are linked together.

VSEPR theory explains five main shapes of simple molecules consisting the central atom. Those five structure basically are linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral geometry. Using the VSEPR theory, we predict that the electron bond pairs and lone pairs on the center atom will help us to predict the shape of a central atom of a molecule. Using this theory the shape of a molecule is determined by the location of the nuclei and its electrons of the molecule.

To learn more about VSEPR Model

https://brainly.com/question/14992767

#SPJ4

The molar mass of sodium phosphate, Na3PO4 is 163.9 g/mol.  Molar mass is the mass of a mole of a substance. A mole is a quantity of substance that contains 6.022 × 1023 particles, such as atoms or molecules. Molar mass is typically calculated in grams per mole (g/mol).

Formula for finding the molar mass of a compound The molar mass of a compound can be calculated using the following formula; Molar mass (M) = sum of the atomic masses of all the atoms present in the compound. The atomic masses of all the elements can be obtained from the periodic table.

The molar mass of a substance is usually expressed in g/mol. Sodium phosphate is a combination of sodium and phosphate ions. It is found in different forms like dibasic and tribasic. Dibasic sodium phosphate is known as sodium hydrogen phosphate or NaHPO4, and tribasic sodium phosphate is known as Na3PO4.

Its chemical formula is Na3PO4.Sodium phosphate is commonly used as a saline laxative to clear the bowel before medical procedures. Sodium phosphate is also used in the food industry as a food additive, emulsifying agent, and thickener.

to know more about Molar mass refer here:

https://brainly.com/question/22997914#

#SPJ11

The concentration of sulfuric acid that remains after neutralization is 0.056 M.

To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:

H2SO4 + 2KOH → K2SO4 + 2H2O

First, you will need to determine the moles of each reactant in the solution.

Moles can be determined using the formula:

moles = concentration x volume

In this case:

moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol

moles of KOH = 0.800 L x 0.250 M = 0.2 mol

Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.

To do this, compare the mole ratios of the reactants:

0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1

Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.

To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.

Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:

0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining

Finally, you can determine the concentration of the H2SO4 remaining:

concentration = moles / volume

concentration = 0.1 mol / (0.850 L + 0.800 L)

concentration = 0.056 M

Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.

For more such questions on concentration, click on:

https://brainly.com/question/28564792

#SPJ11

The given statement "every atom in the universe emits energy in the form of a nucleus" is False.

In the universe, every atom does not emit energy in the form of a nucleus. It is not true in the case of every atom in the universe. But it is true that every atom in the universe emits energy.

According to the Bohr model of the atom, an electron orbiting an atomic nucleus emits radiation when it changes its energy level. The radiation emitted by the electron is in the form of a photon of electromagnetic energy. This is a spontaneous process and it is called spontaneous emission. It can be said that every atom in the universe emits energy.

Therefore, it is false that every atom in the universe emits energy in the form of a nucleus.

To know more about the atom, refer here:

https://brainly.com/question/1566330#

#SPJ4

In a 2A redox reaction, there are 4 electrons exchanged. The species that loses electrons is the oxidized species, and the species that gains electrons is the reduced species.

Explanation: In the given reaction, Fe is oxidized and Cr is reduced. There are six electrons exchanged in 2a.How many electrons are exchanged in 2a?In the given redox reaction,Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq)The given reaction can be split into half reactions:Fe2+ (aq) → Fe3+ (aq) + e- (Oxidation)Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) (Reduction)The reaction Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq) involves the exchange of six electrons in 2a.Therefore, there are six electrons exchanged in 2a.Which species is oxidized and which is reduced?In the given reaction, Fe is oxidized and Cr is reduced.The oxidation half-reaction Fe2+ (aq) → Fe3+ (aq) + e- has Fe on both the left and right sides of the equation. As a result, the oxidation state of iron has gone from +2 to +3. Therefore, iron has lost electrons and has been oxidized.The reduction half-reaction Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) involves the gain of electrons by chromium. As a result, the oxidation state of chromium has gone from +6 to +3. Therefore, chromium has gained electrons and has been reduced.In the given reaction, Fe is oxidized and Cr is reduced.

For more such questions on redox

https://brainly.com/question/23863329

#SPJ11

The molar mass of the solute x is 85.32 g/mol.

The mass of the unknown, non-volatile, non-electrolyte solute = 12.0 g

Mass of the solvent = 100 g

The vapor pressure of the solvent before adding the solute = 100 torr

The vapor pressure of the solvent after adding the solute = 91.4 torr

Temperature = 299 K

Raoult's law can be written as:

P₂ = X₂ * P₁

Where:

P₁ = the vapor pressure of the pure solvent

P₂ = the vapor pressure of the solution

X₂ = the mole fraction of the solute

Solving for

X₂;X₂ = P₂/P₁ = 91.4/100

    X₂ = 0.914

Calculate the moles of benzene;

n = 100g / 78.11 g/mol = 1.28 moles

X₂ = moles of solute / (moles of solute + moles of benzene)

Substituting the value of X₂ and moles of benzene;

n = 0.1406 moles

Now we need to calculate the moles of the solute;

Mass of solute = 12.0 g

Now, we will use the following formula to calculate the molar mass of the solute;

Molar mass = Mass of solute / Moles of solute

Molar mass = 12.0 g / 0.1406 moles

Molar mass of the solute is 85.32 g/mol.

Learn more about molar mass at https://brainly.com/question/837939

#SPJ11

UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-

CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.


The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.

To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.

For more similar questions on topic dissociate

brainly.com/question/15321204

#SPJ11

The chemical name of water is hydrogen oxide.

Water is a compound with the chemical name hydrogen oxide (H2O).

It is a colorless, odorless, and tasteless liquid that is essential for most forms of life on Earth.

Water is a chemical molecule; therefore, its many forms have different names depending on their individual constituents. According to the nomenclature established by the IUPAC, water may alternatively be referred to as dihydrogen monoxide, dihydrogen oxide, hydrogen hydroxide, or hydric acid.

Being the primary component of Earth's hydrosphere and the fluids of all known forms of life, water (chemical formula H 2 O) is an inorganic, clear, tasteless, odorless, and almost colorless chemical substance (in which it acts as a solvent). None of the known forms of life could survive without it, despite the fact that it offers neither dietary energy nor organic micronutrients.

Water is made up of two hydrogen atoms and one oxygen atom, with the formula H2O.

To know more about the water chemically https://brainly.com/question/28885148

#SPJ11

Intramolecular products are preferred over intermolecular products in certain reactions because they are usually more stable and have lower activation energy.

The following are the main reasons why the intramolecular product is the major product:

Regioselectivity is a term used to describe a reaction's ability to form a specific constitutional isomer. In other words, it refers to the preference of a reaction for certain regions of the same compound. Regioselectivity is typically determined by the reaction's mechanism and the steric or electronic effects of the reactants.

In a reaction where a molecule undergoes multiple changes, for example, intramolecular reactions, regioselectivity refers to the selectivity of one or more of these changes.

Learn more about Regioselectivity at https://brainly.com/question/29410845

#SPJ11

The equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Therefore 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

The chemical equation Ca + 2HCl -> CaCl2 + H2 represents the reaction between calcium (Ca) and hydrochloric acid (HCl) to produce calcium chloride (CaCl2) and hydrogen gas (H2).

To balance this equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have:

Therefore, the equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Thus 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

To learn more about hydrogen; https://brainly.com/question/24433860

#SPJ11

The balanced chemical equation for the reaction between carbon dioxide gas and liquid water to produce aqueous carbonic acid is given below.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

Here, the forward reaction is the dissolution of carbon dioxide in water, and the reverse reaction is the release of carbon dioxide from carbonic acid.

Carbonic acid is a weak acid that forms when carbon dioxide reacts with water. It can be shown that the reaction between carbon dioxide and water is a reversible reaction, which means that the carbonic acid can also dissociate into carbon dioxide and water.

To write a balanced chemical equation, we follow these steps:

Using the above steps we get the following balanced chemical equation for the reaction of carbon dioxide and liquid water.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

To learn more about balanced chemical equations refer - https://brainly.com/question/14427845

#SPJ11

60 molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O.

When C6H6 burns in oxygen gas, it reacts to produce carbon dioxide, water, and heat. The equation is:C6H6 + 15 O2 → 6 CO2 + 3 H2O

Equation shows that each molecule of C6H6 reacts with 15 molecules of oxygen to produce 6 molecules of carbon dioxide and 3 molecules of water.

molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O, we can use stoichiometry.

Stoichiometry is the study of the quantitative relationships between reactants and products in a chemical reaction.

The balanced chemical equation shows that 15 molecules of O2 react with each molecule of C6H6 to produce 6 molecules of CO2 and 3 molecules of H2O.

Use his relationship to calculate the amount of oxygen needed to produce 24 molecules of CO2 and 12 molecules of H2O.

Use he ratio from the balanced equation, we can set up a proportion:15 molecules O2 / 1 molecule C6H6 = x molecules O2 / 4 molecules C6H6

4:15 molecules O2 / 1 molecule C6H6 = x molecules O2 / 4 molecules C6H64 x 15 molecules O2 / 1 molecule C6H6 = x molecules O2x = 60 molecules O2

Therefore, 60 molecules of oxygen react with 4 molecules of C6H6 to produce 24 molecules of CO2 and 12 molecules of H2O.

to know more about oxygen refer here:

https://brainly.com/question/13370320#

#SPJ11

The thiocyanate ion (SCN-) concentration equals the complex ion concentration in beakers 2-7 because the reaction that took place was a 1:1 stoichiometric reaction. This means that the moles of SCN- reactant is equal to the moles of complex product formed.

The thiocyanate ion concentration in beakers 2-7 can be assumed to equal the complex ion concentration because the reaction between the iron(III) ion and thiocyanate ion is practically irreversible. According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion.

Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.Let's use this information to provide an HTML-formatted answer below:

In beakers 2-7, the thiocyanate ion concentration is assumed to equal the complex ion concentration because the reaction between iron(III) ions and thiocyanate ions is practically irreversible.

According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion. Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.

For more such questions on stoichiometric reaction , Visit:

https://brainly.com/question/29007372

#SPJ11

The quantity of carbon present in moles is 3.36 x 10^23 moles.

The compound analyzed contains 0.1935 g of carbon, 0.0325 g of hydrogen, and 0.2043 g of fluorine.

The molar mass of the compound is 240.23 g/mol.

1. First, calculate the molecular mass of the compound by multiplying the mass of each element by its molar mass.

2. Divide the mass of carbon by the molecular mass of the compound.

3. Multiply the result by Avogadro's number (6.022 x 10^23).

Molecular mass = 0.1935 g x 12.011 g/mol (Carbon) + 0.0325 g x 1.008 g/mol (Hydrogen) + 0.2043 g x 18.998 g/mol (Fluorine) = 240.23 g/mol.

Moles of Carbon = 0.1935 g / 240.23 g/mol x 6.022 x 10^23 = 3.36 x 10^23 moles.

Therefore, the quantity of carbon present in moles is 3.36 x 10^23 moles.

to know more about carbon refer here:

https://brainly.com/question/22530423#

#SPJ11

The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.

In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.

Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

To know more about catalyst click on below link :

https://brainly.com/question/24430084#

#SPJ11

The molality of CH3OH is 0.03077 m and the mole fraction of CH3OH is 0.1326.

To calculate the molality of CH3OH (methanol) and the mole fraction of solvent in a solution that is 7.50% by mass CH3OH in CH3CH2OH (ethanol), we can use the following steps:

1. Calculate the moles of CH3OH present in the solution:

Mass of CH3OH = 7.50% by mass × 0.100 L solution = 0.00750 L CH3OH

Moles of CH3OH = 0.00750 L ÷ 24.3 g/mol = 0.0003077 mol CH3OH

2. Calculate the molality of CH3OH:

Molality of CH3OH = moles of CH3OH ÷ 0.100 L solution

= 0.0003077 mol ÷ 0.100 L = 0.03077 m

3. Calculate the moles of CH3CH2OH present in the solution:

Mass of CH3CH2OH = 100% - 7.50% = 92.50% by mass × 0.100 L solution = 0.09250 L CH3CH2OH

Moles of CH3CH2OH = 0.09250 L ÷ 46.1 g/mol = 0.002005 mol CH3CH2OH

4. Calculate the mole fraction of CH3OH:

Mole fraction of CH3OH = moles of CH3OH ÷ total moles

= 0.0003077 mol ÷ (0.0003077 mol + 0.002005 mol) = 0.1326

Therefore, the molality of CH3OH is 0.03077 m and the mole fraction of CH3OH is 0.1326.



Learn more about moles here:

https://brainly.com/question/26416088#


#SPJ11

Answer:

0.0161 M

Explanation:

To find the molarity of the NaCl solution, we need to use the formula:

Molarity (M) = moles of solute / liters of solution

First, we need to calculate the number of moles of NaCl in the solution. We can do this by dividing the mass of NaCl by its molar mass. The molar mass of NaCl is 58.44 g/mol.

moles of NaCl = mass of NaCl / molar mass of NaCl

moles of NaCl = 6.24 g / 58.44 g/mol

moles of NaCl = 0.1066 mol

Now we can use the formula for molarity:

Molarity (M) = moles of solute / liters of solution

Molarity (M) = 0.1066 mol / 6.62 L

Molarity (M) = 0.0161 M

Therefore, the molarity of the student's NaCl solution is 0.0161 M.

No, the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] and [tex]FeBr_3[/tex] in the presence of light or heat will be different from the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] / light or heat.

In the first reaction, [tex]Br_2[/tex] and [tex]FeBr_3[/tex] act as a source of electrophilic bromine, which attacks the aromatic ring of ethylbenzene, leading to the formation of 1-bromoethylbenzene. The mechanism for this reaction is an electrophilic aromatic substitution, where the electrophilic [tex]Br^+[/tex] ion is generated in situ by the reaction of [tex]Br_2[/tex] with [tex]FeBr_3[/tex].

In the second reaction, [tex]Br_2[/tex] acts as a source of free radical bromine, which undergoes a free radical substitution reaction with ethylbenzene, leading to the formation of 1,2-dibromoethylbenzene. This reaction proceeds through a free radical mechanism, where the [tex]Br_2[/tex] molecule is split into two free radicals by the action of light or heat.

Therefore, the products obtained from the two reactions will be different. In the first reaction, 1-bromoethylbenzene will be formed, while in the second reaction, 1,2-dibromoethylbenzene will be formed.

To learn more about Electrophilic aromatic substitution refer to the link: https://brainly.com/question/14908357

#SPJ11

The electron configuration of valence electrons of carbon before and after sp hybridization are shown below:Before hybridization: 2s2 2p2After hybridization: sp2 2p2The orbital diagram before sp hybridization shows two electrons in the 2s orbital and two electrons in each of the 2p orbitals. After hybridization, the 2s orbital mixes with one of the 2p

orbitals to form two sp hybrid orbitals. These sp hybrid orbitals are oriented at 180° to each other, which allows maximum overlap with two 2p orbitals of the carbon atom. The remaining 2p orbital remains unhybridized and

unchanged. Therefore, the hybridized orbitals contain only one electron each and the unhybridized 2p orbital has two electrons.The boxes with arrows in the orbital diagram represent the orbitals and their electrons. The label "2s" is

dragged to the box representing the 2s orbital before hybridization. Similarly, the labels "2p" and "sp" are dragged to the boxes representing the unhybridized and hybridized orbitals after hybridization, respectively. The label "2p" is also dragged to the unhybridized 2p orbital after hybridization.

For more similar questions on hybridization

brainly.com/question/30902614

#SPJ11

The density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.

PART A: Density of a regular shaped object:

Trial 1: mass of the object = 162.20 g

volume of object = L x H x W = 4.90 cm x 3.90 cm x 2.90 cm

= 55.419 cm^3

Therefore density of the object = mass / volume = 162.20 g / 55.419 cm^3

= 2.9268 g/cm^3

trial 2: mass of the object = 162.18 g

volume of object = L x H x W = 4.89 cm x 3.90 cm x 2.88 cm

= 54.92448 cm^3

Therefore density of the object = mass / volume = 162.18 g / 54.92448 cm^3

= 2.9528 g/cm^3

Average = [ 2.9268 + 2.9528 ] /2 = 5.8796 / 2 = 2.9398 g / cm^3 = 1.94 g / cm^3.

The accepted value is 2.73 g / cm^3 for aluminium. The difference is 0.21

% error = 100 x difference / accepted value = 100 x 0.21/2.73 = 7.7 %.

---------------------------------------------------------------------------------------------------

Part B: Determination of density of an irregular shaped object:

Trial 1:

mass of the marble chips = 10.25 g

Volume of the marble chip = final volume of water - initial volume of water

= 53.8 - 50 = 3.8 mL

Therefore density of marble chip = mass / volume = 10.25 g / 3.8 mL

= 2.697 g / mL

Trial 2:

mass of the marble chips = 10.32 g

Volume of the marble chip = final volume of water - initial volume of water

= 53.9 - 50.1 = 3.8 mL

Therefore density of marble chip = mass / volume = 10.32 g / 3.8 mL

= 2.716 g / mL

Average = [2.697 + 2.716] / 2 = 5.413 / 2 = 2.71 g / mL

The accepted density of marble chip = 2.70 g / mL The difference is 0.01

% error = 100 x difference / accepted value = 100 x 0.01/ 2.70 = 0.37 %.

--------------------------------------------------------------------------------------------------------------------

PART C: Determination of density of saline solution:

Trial 1:

Volume of the saline solution = 10 mL

mass of the saline solution = finall mass - initial mass

= 35.66 - 25.36 = 10.3 g

Density of the saline solution = mass / volume = 10.3 g / 10 mL = 1.03 g / mL

Trial 2:

Volume of the saline solution = 10 mL

mass of the saline solution = finall mass - initial mass

= 35.55 - 25.35 = 10.2 g

Density of the saline solution = mass / volume = 10.2 g / 10 mL = 1.02 g / mL

Average =[ 1.03 + 1.02 ] / 2 = 1.025 g / mL

Thus the unknown sample B has the density of 1.025 g / mL.

The composition of salt in this solution can be determined by interpolation.

salt % = 0 + 5 x [ 1.025-0.998] / [1.036 - 0.998] ( using the values given in the table )

= 0 + 5 x 0.027 / 0.038

= 3.55 %.

Thus the density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.

Read more about density here:

https://brainly.com/question/6838128
#SPJ1

The concentration of NaOH solution that requires 37.96 mL of NaOH to titrate 0.702 g of KHP is 0.0896 M.

To calculate the concentration of the NaOH solution which requires 37.96 mL of NaOH to titrate 0.702 g of KHP, we first need to know the balanced equation of the reaction between NaOH and KHP.

The balanced equation is as follows:

NaOH(aq) + KHC₈H₄O₄(aq) = KNaC₈H₄O₄(aq) + H₂O(l)

According to the equation, one mole of NaOH reacts with one mole of KHP (potassium hydrogen phthalate) to produce one mole of NaKC₈H₄O₄ (sodium hydrogen phthalate) and one mole of H2O (water).

Thus, the mole of NaOH required to titrate KHP is:

Mole of NaOH = (mass of KHP) / (molar mass of KHP)

Molar mass of KHP = 204.22 g/mol (mass of KHP is given as 0.702 g)

Mole of NaOH = 0.702 g / 204.22 g/mol = 0.0034 mol NaOH

The volume of NaOH is also given as 37.96 mL. But we need to convert it to liter.

Liters of NaOH = 37.96 mL / 1000 mL/L = 0.03796 L

Concentration (M) of NaOH can be calculated by dividing the number of moles of NaOH by the volume of NaOH in

.

Concentration (M) of NaOH = 0.0034 mol NaOH / 0.03796 L

NaOH = 0.0896 M

Therefore, the concentration of NaOH solution that requires 37.96 mL of NaOH to titrate 0.702 g of KHP is 0.0896 M.

To know more about titration, refer here:

https://brainly.com/question/2728613#

#SPJ11

The half-life of the isotope is 11.2 years.

The half-life of a radioactive isotope is the time it takes for half of the atoms in a sample to undergo radioactive decay. For a radioactive isotope with a decay rate of 6.2 percent per year, the half-life can be calculated as follows:

Half-life = ln(2) / (decay rate) = ln(2) / 0.062 = 11.2 years (rounded to the nearest tenth)

To understand this calculation in further detail, it is helpful to consider the concept of radioactive decay in terms of probability. After one half-life has elapsed, there is a 50 percent chance that an atom will have decayed, and a 50 percent chance that it will remain undecayed. After two half-lives have elapsed, there is a 75 percent chance that an atom will have decayed, and a 25 percent chance that it will remain undecayed.

This concept can be applied to the equation above, as the probability of decay during a single time interval is equal to the decay rate multiplied by the length of the time interval. By solving this equation, the half-life of a given radioactive isotope can be determined.

Learn more about half-life here: https://brainly.com/question/1160651.

#SPJ11

Answer:

The octet rule is a guideline that suggests that atoms tend to combine in a way that allows each atom to have eight electrons in its outermost energy level (except for hydrogen, which is stable with two electrons). However, there are some molecules that do not obey the octet rule. Here are two common types of exceptions and examples of molecules that fall into each category:

Incomplete Octet: In this type of exception, the atoms in the molecule do not have a complete octet of valence electrons. Examples of molecules that have incomplete octets include beryllium chloride (BeCl2) and boron trifluoride (BF3).

In beryllium chloride, beryllium has only four valence electrons, while chlorine has seven. When the two atoms combine, beryllium shares its electrons with two chlorine atoms, but it still has only four electrons around it, which is fewer than the octet rule suggests. In boron trifluoride, boron has only three valence electrons, while fluorine has seven. When the two atoms combine, boron shares its electrons with three fluorine atoms, but it still has only six electrons around it, which is also fewer than the octet rule suggests.

Expanded Octet: In this type of exception, the atoms in the molecule have more than eight valence electrons. Examples of molecules that have expanded octets include sulfur hexafluoride (SF6) and phosphorus pentachloride (PCl5).

In sulfur hexafluoride, sulfur has six valence electrons, while each of the six fluorine atoms has seven valence electrons. When the atoms combine, sulfur shares its electrons with all six fluorine atoms, resulting in a total of 12 electrons around the sulfur atom, which is more than the octet rule suggests. In phosphorus pentachloride, phosphorus has five valence electrons, while each of the five chlorine atoms has seven valence electrons. When the atoms combine, phosphorus shares its electrons with all five chlorine atoms, resulting in a total of 10 electrons around the phosphorus atom, which is also more than the octet rule suggests.

In both cases, the atoms in these molecules are able to deviate from the octet rule due to the availability of empty d orbitals in the central atom that can accommodate additional electrons beyond the octet. Additionally, the size and electronegativity of the atoms involved in the bonding also play a role in determining whether the molecule will obey the octet rule or not.

The activation barrier for the reaction in kJ/mol is ≈ 78.

The activation barrier for the reaction in kJ/mol can be calculated by using the Arrhenius equation.

The Arrhenius equation is represented by the following expression:

[tex]k = A^(^-^E^a^/^R^T^)[/tex]

Where k = rate constant

A = frequency factor (pre-exponential factor)

Ea = activation energy

R = gas constant

T = temperature

The activation barrier for the reaction in kJ/mol is given by the following expression:

Ea = (R)(ln(k2/k1))/(1/T1 - 1/T2)

Where k1 and k2 are the rate constants at temperatures T1 and T2, respectively.

R is the gas constant.

Here, k1 = 0.0117/s, k2 = 0.689/s, T1 = 400.0 K, T2 = 450.0 K and R = 8.314 J/K mol

Converting the units of R to kJ/K mol,

R = 8.314/1000 = 0.008314 kJ/K mol

Therefore, the activation barrier for the reaction in kJ/mol is given by the expression:  

Ea = (0.008314 kJ/K mol) × ln (0.689/0.0117) / ((1/400.0 K) - (1/450.0 K)) ≈ 78 kJ/mol

Learn more about rate constant: https://brainly.com/question/26724488

#SPJ11

In order to determine the rate law for an overall reaction, several experiments must be conducted. First, the reaction must be followed using an appropriate analytical technique such as spectroscopy or titrimetry.

These experiments include the following: To begin with, the reaction rate must be measured using different concentrations of reactants, including keeping one of the reactants constant and varying the other concentrations in one or two experiments.

Second, the reaction rate must be determined using several initial reactant concentrations. In this situation, the order of reaction must be determined in one or two experiments. The reaction order can be determined using graphical techniques or half-life measurements. The order of the reaction must be determined for all reactants.

Read more about the experiment:

https://brainly.com/question/17274244

#SPJ11

The reaction scheme is as follows:

Styrene (monomer) + Azobisisobutyronitrile (initiator) →  Radical polymers + Nitrile groups

Radical polymers then undergo combination or disproportionation as the possible modes of termination:

Combination:

Radical polymers + Radical polymers → Polystyrene (end product)

Disproportionation:

Radical polymers → Polystyrene + Styrene (monomer)

Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.

During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.

These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,

where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.

Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.

This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.

The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.

to know more about styrene refer here:

https://brainly.com/question/14546335#

#SPJ11

Eighteen turns of the Calvin cycle would produce 36 G3P molecules.

The Calvin cycle, also known as the dark cycle, is a metabolic process that occurs in plants and algae. The cycle is made up of a series of chemical reactions that convert carbon dioxide into glucose.

Glyceraldehyde 3-phosphate (G3P) is a three-carbon sugar that is one of the products of the Calvin cycle. Six CO2 molecules and six ribulose-1,5-bisphosphate molecules enter the cycle to create twelve 3-phosphoglycerate molecules.

Twelve ATP molecules and twelve NADPH molecules are then used to transform the 3-phosphoglycerate molecules into twelve G3P molecules. Ten out of twelve G3P molecules are used to regenerate six ribulose-1,5-bisphosphate molecules, while two are used to create glucose or other organic compounds.

Each turn of the Calvin cycle produces one G3P molecule, while each glucose molecule requires two G3P molecules. This implies that 36 G3P molecules would be produced by 18 turns of the Calvin cycle.

To know more about Calvin cycle, refer here:

https://brainly.com/question/30808737#

#SPJ11