how can you use a fuormula to find the sum of the measures of the interior angles of a regular polygon?

By charging $11 per square yard as opposed to $12 per square yard at Shop A, Store B offers the carpet for a lower price per square yard.

The same data that is displayed in tables is also presented in charts and graphs. Yet, compared to a table, a chart or graph provides less detail or greater imprecision.

We must divide the total cost by the quantity of carpet square yards in order to determine the price per square yard. Seeing from the table that Shop A charges $360 for 30 square yards of carpet, the following information is provided:

Shop A's price per square yard is $360.30 sq yard divided by $12 per sq yd

A similar price of $550 is charged by Store B for 50 square yards of carpet, giving us:

$550 divided by 50 square yards yields $11 per square yard at store B.

The graph also shows that, for all carpet sizes, Shop B consistently charges less per square yard than Store A.

To know more about square visit:-

https://brainly.com/question/28776767

#SPJ1

Answer:

Step-by-step explanation:

4 hours and 30 minutes

Answer:

x > 25.5

Step-by-step explanation:

2.5 < [tex]\frac{1}{3}[/tex] (x - 18 ) ← multiply both sides by 3 to clear the fraction

7.5 < x - 18 ( ad 18 to both sides )

25.5 < x , then

x > 25.5

The domain of the equation is {1, 3, 5, 7, 9}. and the range of the equation is {6, 8, 10, 12, 14}.

What is range and domain of a function?

The domain of a function in mathematics is the set of all possible input values (usually denoted by x) for which the function is defined. It is the set of all values of the independent variable (input) for which the function is defined.

A function's range, on the other hand, is the set of all potential output values (typically indicated by y) that the function may generate. It is the set of all values of the dependent variable (output) that the function can take.

Now,

To solve for y:

2y = 30 - 3x

y = (30 - 3x)/2

The domain of the equation is the set of all possible values of x that will make the equation valid. Since x and y are positive integers, we need to find integer solutions for x that will also result in integer values for y.

Let's look at the equation (30 - 3x)/2 = y. For y to be an integer, (30 - 3x) must be even. This means that x can only take on odd integer values between 1 and 9, inclusive. Therefore, the domain of the equation is {1, 3, 5, 7, 9}.

To find the range of the equation, we need to find the possible values of y that correspond to the values of x in the domain. We can substitute each value of x into the equation y = (30 - 3x)/2 and simplify to find the corresponding value of y.

When x = 1, y = 14

When x = 3, y = 12

When x = 5, y = 10

When x = 7, y = 8

When x = 9, y = 6

Therefore, the range of the equation is {6, 8, 10, 12, 14}.

To know more about domain and range of a function visit the link

brainly.com/question/28135761

#SPJ1

Answer:

The overall federal income tax payment for this individual would be $970 + $3,036 = $4,006. So the correct answer is A. $4,006.

Step-by-step explanation:

The individual pays $970 for the 10% tax bracket and $3,036 for the 12% tax bracket. Adding these two amounts together gives us a total federal income tax payment of $4,006.

Tina can mulch the garden alone in 25 minutes.

Let's use the formula for the work rate to solve the problem. If William can mulch the garden alone in 20 minutes, his work rate is 1/20. Similarly, let's assume that Tina can mulch the garden alone in x minutes, so her work rate is 1/x.

When they work together, their work rates add up, so we have:

1/20 + 1/x = 1/11

Now we can solve for x:

1/x = 1/11 - 1/20

1/x = (20 - 11) / (11 x 20)

1/x = 9 / 220

x = 220 / 9

x ≈ 24.4

So it would take Tina 24.4 minutes to mulch the garden alone.

However, we need to round this up to the nearest minute because you can't have a fraction of a minute. Therefore, Tina can mulch the garden alone in 25 minutes.

Alternatively, we can use the inverse formula for the work rate to solve for Tina's time alone:

1/20 + 1/t = 1/11

1/t = 1/11 - 1/20

1/t = (20 - 11) / (11 x 20)

1/t = 9 / 220

t = 220 / 9

t ≈ 24.4

So Tina can mulch the garden alone in 24.4 minutes, which rounds up to 25 minutes.


To know more about work rate, refer here:

https://brainly.com/question/29064611#

#SPJ11

There was this one person that said, 'hey how old are you?' of course I lied. then another asking me to change my profile to something inappropriate.

A triangle's interior will always contain the center of the circle that forms the triangle. As a result, choice b is the correct one.

A circle is a closed curve in geometry made up of all points in a plane that are equally spaced from a fixed point known as the center. The circle's diameter, which is equal to twice the radius, is the distance across the circle that passes through its center. Geometrically speaking, circles are significant shapes with a wide range of applications. For instance, they are used in engineering to construct gears and other circular components, in navigation to determine the distance between two places on the surface of the Earth, in physics to simulate planetary orbits, and in art and design to produce aesthetically beautiful curves and patterns.

given

A triangle's interior will always contain the center of the circle that forms the triangle. As a result, choice b is the correct one.

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

The least-squares solution to this problem is given byx = (AT A)-1 AT bwhere(AT A)-1 is the inverse of the matrix AT A, andAT is the transpose of the matrix A.The solution to this problem iswA/wB = 0.66666667.

To solve the problem of finding the ratio of the weight of mixture A to the weight of mixture B such that we have as close as possible to a total of 5 ounces of gold, 3 ounces of silver, and 4 ounces of platinum, we can use the linear least-squares method.Let wA and wB be the weights of mixture A and mixture B respectively. The total weight of the two mixtures is given bywA + wB.We have the following information about the two mixtures:Mixture A contains 30% gold, 40% silver, and 30% platinum.Mixture B contains 10% gold, 20% silver, and 70% platinum.The total weight of gold in the two mixtures is given by0.3wA + 0.1wB.The total weight of silver in the two mixtures is given by0.4wA + 0.2wB.

The total weight of platinum in the two mixtures is given by0.3wA + 0.7wB.We want to find wA/wB, subject to the following constraints:0.3wA + 0.1wB = 5 (total weight of gold)0.4wA + 0.2wB = 3 (total weight of silver)0.3wA + 0.7wB = 4 (total weight of platinum)We can rewrite these constraints in matrix form as Ax = b where A = [tex][[0.3, 0.1], [0.4, 0.2], [0.3, 0.7]]x = [wA, wB]Tb = [5, 3, 4][/tex]

for such more questions on ratios

https://brainly.com/question/2328454

#SPJ11

Answer:

Step-by-step explanation:

A reflection across the line y = x will not carry the square onto itself, since the vertex (0, 2) would be reflected to (2, 0) which is not a vertex of the original square.

A reflection across the line y = -x would also not carry the square onto itself, since the vertex (0, 2) would be reflected to (−2, 0) which is not a vertex of the original square.

However, a reflection across the x-axis would carry the square onto itself since all of the vertices lie in the same quadrant, and reflecting across the x-axis does not change their signs.

A 45° or 90° rotation about the origin would also carry the square onto itself since the square has rotational symmetry of order 4.

Therefore, the correct answers are C, D, and E.

The sum of the volume of the square prism and the square pyramid is 672 cubic inches.

What is prism ?

A prism is a three-dimensional geometric shape that has two identical, parallel polygonal bases and rectangular sides that connect the bases. The sides are perpendicular to the bases and their shape depends on the shape of the base. For example, if the base is a square, the prism is called a square prism. If the base is a rectangle, the prism is called a rectangular prism. The height of the prism is the perpendicular distance between the bases.

According to the question:
First, let's calculate the volume of the square prism:

The formula for the volume of a square prism is V = lwh, where l is the length, w is the width, and h is the height.

In this case, the length (l) and width (w) of the prism are both equal to a, which is 10 inches, and the height (h) is 6 inches. So, we have:

V_prism = lwh = 10 x 10 x 6 = 600 cubic inches

Next, let's calculate the volume of the square pyramid:

The formula for the volume of a square pyramid is V = (1/3)Bh, where B is the area of the base and h is the height.

In this case, the base of the pyramid is a square with side length b, which is 6 inches, so the area of the base is:

[tex]B = b^2 = 6^2 = 36 square inches[/tex]

The height of the pyramid is also 6 inches, so we have:

V_pyramid = (1/3)Bh = (1/3) x 36 x 6 = 72 cubic inches

Finally, the total volume is the sum of the volumes of the prism and pyramid:

V_total = V_prism + V_pyramid = 600 + 72 = 672 cubic inches

Therefore, the sum of the volume of the square prism and the square pyramid is 672 cubic inches.

To know more about prism visit:
https://brainly.com/question/13379929
#SPJ1

Answer:

Calculate the surface area

Step-by-step explanation:

175 Cm³ is the correct volume of the triangular prism.

What is prism?

A prism is a solid, three-dimensional object whose two ends are identical. It is a result of the elements of flat faces, identical bases, and equal cross-sections. Without bases, the prism's faces are parallelograms or rectangles.

                               A prism is a transparent object made of glass or another material that has been cut into precise angles and plane faces for the purpose of reflecting and analyzing light in optics. White light can be divided into its component colors, known as a spectrum, using a standard triangular prism.

V = 1/2 x B x H

Find the Base area = l x w

Base area = (10 x 5)

Base area = 50 sq.m

V = (1/2) x (50) x 7

V =  175

Learn more about Prism

brainly.com/question/29722724

#SPJ1

To calculate the percent yield of copper (II) oxide, you need to have the actual yield and the theoretical yield. The percent yield can be calculated using the following formula: Percent Yield = (Actual Yield / Theoretical Yield) * 100

1. Obtain the actual yield: This is the amount of copper (II) oxide produced in your experiment or reaction, typically measured in grams.
2. Calculate the theoretical yield: Use the balanced chemical equation and the stoichiometry of the reaction to determine the maximum amount of copper (II) oxide that could be produced from the given reactants.
3. Plug the values into the formula: Divide the actual yield by the theoretical yield and multiply the result by 100 to get the percent yield.
If you obtained a yield different than the expected or theoretical yield, there could be several reasons, including experimental errors, impure reactants, or side reactions occurring during the process. These factors can cause the actual yield to be higher or lower than the theoretical yield.

Learn more about percent yield here, https://brainly.com/question/11963853

#SPJ11

The difference between Jen's total assets and liabilities is her net worth. The sum of her credit card debt and school loan debt represents her overall liabilities.

Liability can also include owing money or services to someone, even though word usually refers to being responsible for something. For instance, a homeowner's tax obligation may include the sum of city property taxes owed or the sum of federal income taxes owed.

To calculate Jen's net worth, we need to subtract her total liabilities from her total assets:

Net worth = Total assets—Total liabilities

Her total obligations must be subtracted from her total assets in order to determine her net worth:

Total liabilities = $ [tex]1,670[/tex] + $ [tex]3,642 =[/tex] $ [tex]5,312[/tex]

Net worth = $ [tex]6,964[/tex] - $ [tex]5,312[/tex]

Net worth = $ [tex]1,652[/tex]

Therefore, Jen's net worth is $ [tex]1,652[/tex]  .

Learn more about assets here:

https://brainly.com/question/14287268

#SPJ1

To convert Wendall's measurements from inches to feet, we need to divide each measurement by 12, since there are 12 inches in a foot. So, the measurements in feet are:Length (in)Length (ft)242363484605To convert Stacey's measurements from feet to inches, we need to multiply each measurement by 12. So, the measurements in inches are:Length (ft)Length (in)6727848969108Therefore, the measurements of the wooden planks Wendall measured in feet are 2, 3, 4, and 5 feet, and the measurements of the wooden planks Stacey measured in inches are 72, 84, 96, and 108 inches.

The probability that more than 50 inspections are required before one with the defect is found is very low , approximately 1.05 x 10^-9.

We can use a geometric distribution to model the number of cars that need to be inspected before one with the defect is found. Since the probability of finding a car with the defect is p = 0.4, the probability of not finding a car with the defect on a given inspection is q = 1 - p = 0.6.

Let's define the random variable X as the number of inspections required until one with the defect is found. The PMF of the geometric distribution is:

P(X = k) = q^(k-1) * p

where k is the number of inspections required.

To find the probability that more than 50 inspections are required, we need to calculate the cumulative probability:

P(X > 50) = Σ(k=51 to ∞) P(X = k)

Using the PMF of the geometric distribution, we get:

P(X > 50) = Σ(k=51 to ∞) q^(k-1) * p

This sum can be simplified using the formula for the sum of an infinite geometric series:

P(X > 50) = q^50 * p / (1 - q)

Substituting in the values of p = 0.4 and q = 0.6, we get:

P(X > 50) = 0.6^50 * 0.4 / 0.4 = 0.6^50

Using a calculator or software, we can calculate that this probability is approximately 1.05 x 10^-9, which is a very small probability.

To learn more about probability click on,

https://brainly.com/question/28751704

#SPJ4

Complete question is:

Of the automobiles produced at a particular plant, 40% had a certain defect. what is the probability that more than 50 cars will need to be inspected before one with the defect is found?

The circumference of a circle with a radius of 15 inches is 30π inches, or 94.25 inches

The circumference of a circle can be calculated using the formula:

C = 2πr

where C is the circumference, r is the radius, and π (pi) is a mathematical constant approximately equal to 3.14159.

In this case, the radius is 15 inches. Substituting this value into the formula, we get:

C = 2π(15) = 30π

So the circumference of a circle with a radius of 15 inches is 30π inches, or approximately 94.2478 inches.

Learn more about circumference on;

https://brainly.com/question/20489969

#SPJ1

The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.

To find the angle we use the trigonometric functions:

tan(θ) = grade = rise/run

Given that, the grade of the incline is 78%, then grade = 0.78.

θ = arctan(0.78) ≈ 38.7 degrees.

Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

Learn more about grade here:

https://brainly.com/question/29150359

#SPJ1

When the equilibrium point is above the potential GDP line, the economy is experiencing inflationary pressure.

In the AD/AS model, whether the economy is in a recession is illustrated by how close the equilibrium is to the potential GDP line. The potential GDP line represents the maximum level of output that an economy can produce with its existing resources and technology.What is the AD/AS model?The AD/AS model is a graphical representation of the macroeconomic relationship between aggregate demand (AD) and aggregate supply (AS). This model is used to explain the behavior of the economy by demonstrating how changes in the level of aggregate demand and aggregate supply can impact the economy's level of output and prices.

The model's AD curve represents the total demand for all goods and services in an economy at different price levels. The AS curve represents the total supply of all goods and services in the economy at different price levels.

The intersection of the AD and AS curves represents the equilibrium point where the economy's output level and price level are determined. The economy is in a recession when the equilibrium point is below the potential GDP line.

for such more questions on equilibrium point

https://brainly.com/question/29078763

#SPJ11

Answer:

Step-by-step explanation:

Let's represent the maximum number of operations per second as "x".

If the computer is running at 40% of the maximum, it is performing 0.4x operations per second.

We are given that the computer is performing 30 operations per second, so we can set up an equation:

0.4x = 30

Solving for x:

x = 75

Therefore, the maximum number of operations the computer can perform per second is 75.

So, the correct answer is 4. 75 operations per second.

The probability of winning is 1/17, which can also be expressed as a decimal (approximately 0.059) or as a percentage (approximately 5.9%).

The odds on a bet represent the ratio of the probability of winning to the probability of losing. In this case, the odds are 16:1 against winning, which means that the probability of winning is 1 out of 16.

To express this probability as a fraction, we can use the formula:

Probability of winning = 1 / (odds + 1)

Plugging in the given odds, we get:

Probability of winning = 1 / (16 + 1)

Probability of winning = 1/17

In this case, the odds of 16:1 against winning correspond to a probability of 1/17, which represents the chance of winning the bet.

To learn more about probability click on,

https://brainly.com/question/29111123

#SPJ4

The right answer is (B), which is $145,000, given that his building property insurance costs $652.50 annually.

In mathematics, interest usually refers to the sum of money that is charged or made over the course of a given period of time on a principal sum of money. In finance and economics, interest—which can be basic or compound—is frequently used to calculate borrowing costs and return on investment. The principal sum, the interest rate, and the duration for which the interest is being charged or earned are the three factors used to compute simple interest.

given

We are informed that Floyd's home is situated in a suburban area, where building property insurance costs $0.45 for every $100 of coverage.

Assume Floyd's home is worth x. Then, the yearly payment for his home's building property insurance is:

0.0045x = $652.50

After finding x, we obtain:

x = $652.50 ÷ 0.0045

x ≈ $145,000

Floyd's home is therefore currently worth about $145,000.

The correct response is (B ) $145,000 as  his building property insurance is $652.50 per year.

To know more about interest visit:

https://brainly.com/question/28792777

#SPJ1

The solution to the inequality 2√(x-3) < √(x+3) is x ∈ (3, 7].

What is an inequality?

In mathematics, an inequality is a statement that compares two values or expressions and states that one is greater than, less than, or not equal to the other. An inequality is typically written using inequality symbols such as "<" (less than), ">" (greater than), "<=" (less than or equal to), ">=" (greater than or equal to), or "!=" (not equal to). Inequalities are used to represent a wide range of mathematical concepts, such as the relationships between two quantities, the constraints on a system, or the conditions for a particular outcome to occur. Solving inequalities involves finding the set of values that satisfy the inequality, which may be a single value, a range of values, or no values at all.

What are the key steps to solve this inequality?

To solve the inequality, we need to isolate the variable x on one side of the inequality and then square both sides to eliminate the square roots. However, we need to be careful when squaring both sides because this may introduce extraneous solutions. To avoid this, we need to check our solutions at the end to make sure they satisfy the original inequality.

Isolate the square root term on one side of the inequality

2√(x-3) < √(x+3)

Square both sides:

4(x-3) < x+3

Simplify and rearrange the inequality to get x on one side

4x - 15 < 0

x < 15/4

Check the solution by plugging it into the original inequality

2√(15/4 - 3) < √(15/4 + 3)

2√(3/4) < √27/4

2(√3/2) < 3/2

√3 < 3/2 (This is true)

Therefore, the solution to the inequality is x ∈ (3, 7].

To know more about Inequality visit :

brainly.com/question/30228778

#SPJ1

The products of pair of complex conjugates is 41

The product of a real number with an imaginary number is a complex number. A complex number is often symbolised by the symbol z and has the form a + ib. Re(z) is used to represent the value "a" as the real component, and Im is used to represent the value "b" as the imaginary part (z). Ib is sometimes referred to as an imaginary number.

complex conjugates expressed as

=(4+5i)(4-5i)

Expand the expression:

=16-20i+20i-25i²

=16-25i²

According to complex number, i² = -1

Substitute this into the result to have:

=16+25

=41

Hence the products of  pair of complex conjugates is 41.

To know more about imaginary number, visit:

https://brainly.com/question/6748860

#SPJ1

Answer:

y = - [tex]\frac{1}{2}[/tex] x - 3

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = - [tex]\frac{1}{2}[/tex] x - 2 ← is in slope- intercept form

with slope m = - [tex]\frac{1}{2}[/tex]

• Parallel lines have equal slopes , then

y = - [tex]\frac{1}{2}[/tex] x + c ← is the partial equation

to find c substitute (- 4, - 1 ) into the partial equation

- 1 = - [tex]\frac{1}{2}[/tex] (- 4) + c = 2 + c ( subtract 2 from both sides )

- 3 = c

y = - [tex]\frac{1}{2}[/tex] x - 3 ← equation of parallel line

d. Reflect across the x-axis and translate up 4 and right 3, this transforms the pre-image to the composite image.

What is composite image?

A composite image is the result of applying multiple transformations to a given pre-image. It is formed by first applying one transformation to the pre-image and then applying another transformation to the resulting image, and so on.  The final result is the composite image.

Let's analyze the given options:

a. Reflect across the y-axis and translate 4 down and three left.

This transformation would reflect the pre-image across the y-axis, which would change the signs of the x-coordinates, and then translate it 4 units down and 3 units left. However, this transformation would not result in the composite image provided.

b. Rotate 180° and reflect across the x-axis.

This transformation would rotate the pre-image 180 degrees counterclockwise around the origin, which would change the signs of both the x and y-coordinates, and then reflect it across the x-axis. This transformation would not result in the composite image provided.

c. Rotate 90° and translate 4 up and 3 right.

This transformation would rotate the pre-image 90 degrees counterclockwise around the origin, which would swap the x and y-coordinates and negate the new x-coordinate, and then translate it 4 units up and 3 units right. This transformation would not result in the composite image provided.

d. Reflect across the x-axis and translate up 4 and right 3.

This transformation would reflect the pre-image across the x-axis, which would change the signs of the y-coordinates, and then translate it 4 units up and 3 units right. This transformation would result in the composite image provided.

Therefore, the correct answer is d. Reflect across the x-axis and translate up 4 and right 3.

To learn more about composite image visit:

https://brainly.com/question/31108338

#SPJ1

Therefore , the solution of the given problem of function comes out to be  this equation has a single value for x = 4.5 .

The midterm test questions will cover all of the topics, including actual as well as fictitious locations and arithmetic variable design. a diagram showing the relationships between different elements that cooperate to create the same result. A service is composed of numerous distinctive components that cooperate to create distinctive results for each input. Every mailbox has a particular spot that might be used as a haven.

Here,

A linear function is represented by the equation:

=> 4x - 3 = 15

The formula for this equation is y = mx plus b, where m denotes the slope and b the y-intercept:

=> 4x - 3 = 15

=> 4x = 18

=> x = 4.5

As a result, this equation has a single value for x as its solution, indicating that it reflects a linear function.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1