I NEED HELP ON THIS ASAP! PLEASE IT'S DUE TONIGHT!

We can use the ideal gas law to find out the pressure of the gas.

★ PV = nRT

★P = nRT/V

Where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

We are given-

On substituting the values -

→ P = ( 6 × 0.0821×366.5)/41.7

→ P = 180.54/41.7

→ P =4.33 atm

→ P = 4.33×101.3 KPa

→P = 438.629 KPa

Henceforth, the pressure of the gas is 438.629 KPa.

The equilibrium constant for the reversible reaction in aqueous medium is 88.

In order to determine the equilibrium constant for the reversible reaction in aqueous medium given that respective concentrations of A, B, C, and D are 0.0117 M, 0.00440 M, 0.00550 M, and 0.00780 M, we can use the equilibrium constant expression:

Kc = [tex][C]^{2} [D]^{3} / [A]^{3} [B]^{3}[/tex]

where [A], [B], [C], and [D] are the molar concentrations of the species involved in the reaction.

Substituting the concentration values into the equilibrium constant expression:

Kc =[tex](0.00550 M)^{2} (0.00780 M)^{3} / (0.0117 M)^{3} (0.00440 M)^{3}[/tex]

Kc = 87.8.

The equilibrium constant for the reversible reaction in aqueous medium is 88 (to the nearest whole number).

To learn more about equilibrium constant; https://brainly.com/question/3159758

#SPJ11

Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

Boric acid, also known as orthoboric acid or H3BO3, has a three-dimensional (3D) structure in the solid state, which is also known as a "network structure".

The main component of the structure is a covalent bond between the boron and oxygen atoms, known as a 2c-2e bond.

This network structure is formed when hydrogen bonds join the oxygen atoms to each other, thus forming a 3D framework.

Borazine (B3N3H6) consists of planar molecules, with three-membered rings of alternating nitrogen and boron atoms that are connected by single bonds.

Borazine has no hydrogen bonds, and all the boron-nitrogen bonds are 2c-2e bonds. Therefore, the statement Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

to know more about boric acid refer here:

https://brainly.com/question/14879930#

#SPJ11

To determine the number of moles of KIO3 required to produce 250g of O2, we need to use stoichiometry and the molar mass of O2. the molar mass of O2 The molar mass of O2 is 32 g/mol 16 g/mol for each oxygen atom.

An atom is the basic unit of matter, consisting of a nucleus of protons and neutrons, with electrons in orbit around the nucleus. Atoms are incredibly small, with a diameter of about 0.1 to 0.5 nanometers. The identity of an element is determined by the number of protons in the nucleus of its atoms.

The nucleus is a dense, positively charged central core of an atom that contains protons and neutrons. It is surrounded by negatively charged electrons that orbit around the nucleus in shells or energy levels. The number of protons in the nucleus determines the atomic number and chemical properties of an element. The nucleus also holds most of the mass of an atom. In summary, the nucleus is the central region of an atom where most of its mass is concentrated, and it is made up of protons and neutrons.

To know more about atom visit :

https://brainly.com/question/30898688

#SPJ1

Robert Boyle helped dispel the ancient Greek theory of the four elements, which stated that all matter was made up of earth, air, fire, and water.  

Boyle's experiments with gases led to the development of the modern concept of an element as a fundamental substance that cannot be broken down into simpler substances.

The tray of ice will weigh the same as the starting tray of water. This is because the mass of the water is conserved during the freezing process. Although the water changes from a liquid to a solid state, the total earth amount of matter remains the same.

Ice melting is a physical change. A physical change is a change that does not result in the formation of a new substance with different chemical properties. When ice melts, it simply changes from a solid to a liquid state, but the chemical composition of the water remains the same.

Intensive properties are properties that do not depend on the amount of matter present. Examples include temperature, density, and color. Extensive properties, on the other hand, depend on the amount of matter present. Examples include mass, volume, and energy. In other words, if you double the amount of matter present, the value of an extensive property will also double, but the value of an intensive property will remain the same.

Learn more about chemical composition here

https://brainly.com/question/678196

#SPJ1

The mass of the iron (Fe) sample that contains the same number of moles as a 14.0 g sample of Ar is 55.8 g.

To solve this problem, we must first determine the number of moles of Ar in the given 14.0 g sample. Ar's molar mass is 39.95 g/mol, according to the periodic table. Therefore, 14.0 g of Ar (1 mol Ar/39.95 g) = 0.350 mol Ar.

So the sample's Fe mass, which contains the same number of moles, is determined using the molar mass of iron (Fe) from the periodic table. Iron's molar mass is 55.8 g/mol. Therefore, the mass of the Fe sample is as follows:0.350 mol Fe x 55.8 g/mol = 19.53 g Fe. So, there are 19.53 grams of Fe in a sample of Fe that contains the same number of moles as a 14.0 g sample of Ar.

Learn more about iron (Fe) : https://brainly.com/question/30649367

#SPJ11

The empirical formula of the solid can be represented as x:y.

The empirical formula of the solid is determined by the ratio of the atoms found at the corners and faces of the face-centered cubic cell.

Since the number of atoms at the corners is represented by x, and the number of atoms at the faces is represented by y, then the empirical formula of the solid can be represented as x:y.

For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the empirical formula of the solid can be written as 2:6, or 1:3.

The empirical formula of the solid, it is necessary to first determine the total number of atoms that make up the cell.

This can be done by multiplying the number of atoms at the corners (x) by 8, since there are 8 corners in a face-centered cubic cell, and adding the result to the number of atoms at the faces (y).

This total number of atoms can be represented as T, and can be written as T = 8x + y.

The empirical formula of the solid is then determined by dividing the number of atoms at the corners (x) and faces (y) by the total number of atoms (T). This calculation can be written as x/T and y/T.

Therefore, the empirical formula of the solid is determined by the equation x/T:y/T.

For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the total number of atoms in the cell is 14 (8x2 + 6).

Therefore, the empirical formula of the solid can be calculated as 2/14:6/14, or 1:3.

The empirical formula of the solid in a face-centered cubic cell can be determined by,

calculating the total number of atoms in the cell (8x + y), and then dividing the number of atoms at the corners (x) and faces (y) by this total number. The result is the empirical formula of the solid, which is represented as x:y.

to know more about empirical formula refer here:

https://brainly.com/question/14044066#

#SPJ11

Metals have a high theoretical strength, but their actual strength is usually lower. This is because metals are made up of individual grains or crystals, which are all slightly misaligned with each other.

During loading, these misalignments create slip planes which concentrate the applied stress, leading to the material yielding (or deforming plastically) before it breaks.

Other causes of the reduced actual strength are stress corrosion cracking, fatigue, and defects like inclusions and grain boundaries.

The actual strength of a metal is affected by the grain size and the volume fraction of grain boundaries, as the grain boundaries are weaker than the grains themselves.

The shape and distribution of the grains also influence the strength, as the misalignments of the grains affect how stress is distributed in the material.

The microstructural features, such as the presence of inclusions, can affect the strength. Finally, the chemical composition and heat treatment of the metal can also have a great effect on the strength.

The actual strength of metals is lower than their theoretical strength due to the misalignments between grains, the presence of grain boundaries, stress corrosion cracking, fatigue, and microstructural features like inclusions.

Heat treatment and chemical composition can also affect the strength of metals.

to know more about metal refer here:

https://brainly.com/question/28650063#

#SPJ11

For the given reaction, the moles of chlorine required to react with 3 moles of phosphorus to completely use up all the phosphorus.

The balanced chemical equation for the reaction is:

P4 + 6Cl2 → 4PCl3

Now, the stoichiometric ratio between P4 and Cl2 can be seen from the balanced equation as 1 mole of P4 reacts with 6 moles of Cl2.

So,

3 moles of P4 will require= 6 moles of Cl2 × (3 moles of P4 / 1 mole of P4)= 18 moles of Cl2

Therefore, 18 moles of Cl2 would be required to react with 3 moles of P4 to entirely use up all the phosphorus.

Note:

The balanced chemical equation is used to calculate the moles of reactants and products involved in a chemical reaction.

The mole ratio between the reactants and products can be determined from the balanced chemical equation.

To know more about the moles https://brainly.com/question/26416088

#SPJ11

To determine how many milliliters (ml) of 0.280 m barium nitrate are required to remove all of the sulfate ions from 25.0 ml of 0.350 m aluminum sulfate, you can use the following equation:

Molarity (M) = moles/volume (V)

First, calculate the number of moles of sulfate ions in the given volume of aluminum sulfate.

M = 0.350 M = moles/25.0 ml

moles = 0.350 M x 25.0 ml = 8.75 moles

Next, calculate the number of moles of barium nitrate that are needed to completely remove the sulfate ions.

M = 0.280 M = moles/V

moles = 8.75 moles/V

V = 8.75 moles/0.280 M = 31.25 ml

Therefore, 31.25 ml of 0.280 m barium nitrate is required to remove all of the sulfate ions from 25.0 ml of 0.350 m aluminum sulfate.

This is because molarity (M) is a measure of concentration that is equal to moles of a substance divided by the volume of the solution (V). Thus, to remove the sulfate ions from the aluminum sulfate solution, you must calculate the molarity of the aluminum sulfate, calculate the number of moles of sulfate ions in the solution, and then calculate the number of moles of barium nitrate that are needed to completely remove the sulfate ions. The volume of barium nitrate required is equal to the number of moles of sulfate ions divided by the molarity of the barium nitrate.  

To know more about  barium nitrate click on below link :

https://brainly.com/question/13275883#

#SPJ11

Answer:

The general principle of science shown by the lab is: "Changes to one part of a system can affect other parts of the system."

Explanation:

This principle is also known as the principle of interdependence, which states that parts of a system are interconnected and can influence one another. In this case, the lab modeled how changes to Earth's surface, such as deforestation or urbanization, can affect the properties of the atmosphere, such as temperature and composition.

Answer:

The student is calculating how many moles of water are required to fully react with 2.1 moles of aluminum.

Explanation:

2AL + 6H20  > 2AL(OH)3  + 3H2

The ratio 6:2 is the same as the molar ratio of H2O to Al:  (6 moles H2O)/(2 moles Al).  The student is likely calculating how many moles of water is required to fully react with 2.1 moles of Al.  

The two cations, Fe2+ and Cu2+, present in the solution will react with lead metal to form Pb2+ in lead fishing sinker immersed in a solution of Fe2+ and Cu2+. The balanced reaction that will occur is given below; Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s)

When the lead fishing sinker is immersed in the solution containing Fe2+ and Cu2+, the lead metal will get oxidized to Pb2+ in both the cases, forming two separate reaction equations. Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) (Equation 1)Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s) (Equation 2)Here, in the reaction 1, the Fe2+ cation acts as an oxidizing agent and gets reduced to Fe, while the Pb metal gets oxidized to Pb2+.

In reaction 2, the Cu2+ cation acts as an oxidizing agent and gets reduced to Cu, while the Pb metal gets oxidized to Pb2+.Lead is a less reactive metal and gets easily oxidized. This leads to the formation of Pb2+ ions in the solution. The lead metal is immersed in the solution and thus gets oxidized as per the redox reactions mentioned above. The two reactions occur independently in the presence of Fe2+ and Cu2+ ions.

Know more about  redox reactions here:

https://brainly.com/question/13293425

#SPJ11

A 0.01m solution of hydrochloric acid has a pH of 2 because the hydrochloric acid is a strong acid and completely dissociates into its ions, H+ and Cl-, when it is dissolved in water.

This increases the amount of H+ in the solution, resulting in a low pH. On the other hand, acetic acid is a weak acid, which means that it does not completely dissociate into its ions when it is dissolved in water.

Therefore, there is not a large increase in H+ ions in the solution and the pH of the solution is not as low, resulting in a pH of 3.37.

To know more about hydrochloric acid, refer here:

https://brainly.com/question/27173946#

#SPJ11

The addition of a catalyst from the list below will not alter the reaction rate of an equilibrium chemical system.

The chemical equilibrium is unaffected by a catalyst. That just quickens a response. In actuality, a catalyst quickens both the forward and backward reaction. As we increase the pressure, the response changes in a way to offset that effect, so changing the pressure has no influence on the equilibrium constant.

The equilibrium position of a reversible reaction can be impacted by variations in concentration, temperature, and pressure. Chemical reactions are equilibrium reactions.

To know more about reaction rate visit:-

https://brainly.com/question/30546888

#SPJ1

Answer:

Sublimation, the dry ice changes to a gas, solid to gas is sublimation

The lattice energy for LiF will be greater than that of LiI.

Thus, the correct answer is larger.

Lattice energy, also known as lattice enthalpy, is the energy that must be supplied to completely separate one mole of an ionic compound into its gaseous ions. The lattice energy of an ionic compound depends on two things: the charge on the ions and the size of the ions.

This energy can be calculated by subtracting the energy required to separate the ions from the energy gained when the ions bond. The reason why the lattice energy of LiF is higher than that of LiI is the smaller the ions and the higher the charge, the more energy will be released when they come together to form a crystal lattice. Li+ and F- ions are both smaller in size and higher in charge than Li+ and I- ions, respectively.

As a result, the lattice energy of LiF will be larger than that of LiI.

For more information about Lattice energy refers to the link: https://brainly.com/question/18222315

#SPJ11

NaOH is a strong base and completely dissociates in water. The number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.  Hence, 99 ml of NaOH must be added.

It measures the acidity or basicity of a solution on a scale of 0 to 14. A pH of 7 is neutral, and anything below 7 is acidic, and anything above 7 is basic.

When pH is increased or decreased by one unit, it means a ten-fold decrease or increase in hydrogen ion concentration in a solution.Acid and base are two essential terms to learn here.

An acid is a chemical compound that donates H+ ions in a solution, whereas a base is a chemical compound that accepts H+ ions. These H+ ions determine the acidity of the solution.

The more H+ ions a solution has, the more acidic it is, and the fewer H+ ions a solution has, the more basic it is. A pH of 2 indicates that the solution is highly acidic.

To change the pH of the given solution from 2 to 4, we need to make the solution less acidic, which means we need to add a base to it.

Let the volume of the base we need to add be x ml.The pH of the new solution will be 4. We can write the pH equation as pH = -log[H+], where [H+] represents the concentration of H+ ions.

The concentration of H+ ions in the initial solution is:2 = -log[H+]. Hence, [H+] = 0.01 M.The concentration of H+ ions in the final solution is:4 = -log[H+].

Hence, [H+] = 0.0001 M.We know that[H+] = Acid concentration = Base concentration.Hence, the concentration of NaOH added to the solution will be 0.01 M - 0.0001 M = 0.0099 M.

NaOH is a strong base and completely dissociates in water. So, the number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.

The volume of NaOH needed to achieve this concentration:0.0099 mol/L = n NaOH / V NaOHn NaOH = 0.0099 mol/L x (10 mL + x) = 0.099 molV NaOH = n NaOH / 0.1 mol/L = (0.0099 mol) / (0.1 mol/L) = 0.099 L = 99 ml

Hence, 99 ml of NaOH must be added to 10 ml of a solution of HCl with a pH of 2 to change the pH to 4.

to know more about neutralized refer here:

https://brainly.com/question/27891712#

#SPJ11

The activation energy of the reaction, given that the rate constant has tripled when the temperature rose from 25 °C to 65 °C, is 42.6 kJ/mole.


Activation energy is the minimum energy required for a reaction to take place. It is calculated using the Arrhenius equation, which states that the rate constant, k, is proportional to the exponential of negative activation energy (Ea) divided by the gas constant (R) multiplied by the absolute temperature (T).

As the rate constant has tripled when the temperature increased, the activation energy can be calculated as Ea = -R * (1/T2 - 1/T1).

Plugging in the given temperature values of 25 °C and 65 °C and the gas constant, R, the activation energy is 42.6 kJ/mole.

To know more about rate constant click on below link:

https://brainly.com/question/14977272#

#SPJ11

The complete balanced equation for the neutralization reaction between HCl and NaHCO₃ is:

HCl + NaHCO₃ → NaCl + H₂O + CO₂

The reaction between hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃) is known as a neutralization reaction. In this reaction, HCl and NaHCO₃ combine to produce NaCl, water, and carbon dioxide.

The reaction can be represented by the following equation: HCl + NaHCO₃ → NaCl + H₂O + CO₂

This reaction already the balanced chemical equation for the reaction since the number of each element in the reactant side is equal to the number of each element in the product side.

Learn more about balanced equation here: https://brainly.com/question/11904811.

#SPJ11

During the nitration of methyl benzoate, acts as a nucleophile is a. methyl benzoate.

Nitration is a chemical reaction process in which an aromatic ring is treated with a mixture of nitric acid and sulphuric acid (nitration mixture) to add one or more nitro functional groups to the ring. Aromatic compounds like benzene, toluene, or naphthalene, are often used as substrates.

The compound that undergoes nitration is generally an electron-rich compound. The reaction mechanism of the nitration reaction includes the generation of an intermediate compound known as nitronium ion, NO2+. In this case, during the nitration of methyl benzoate, the methyl benzoate acts as the nucleophile.HTML formatted answer:The nucleophile during the nitration of methyl benzoate is the methyl benzoate.

Learn more about nucleophile at:

https://brainly.com/question/6357352

#SPJ11

Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.

Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.

Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.

Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.

It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.

Learn more about table salt here:

https://brainly.com/question/5528908

#SPJ11

The basicity of the acid is equal to the number of moles of NaOH that reacted with one mole of acid. Since we know that 0.00025 moles of NaOH reacted with 0.01873 moles of acid.

What is Neutralization?

Neutralization is a chemical reaction that occurs when an acid and a base react with each other to form a salt and water. In this reaction, the hydrogen ions (H+) from the acid combine with the hydroxide ions (OH-) from the base to form water (H2O), and the remaining ions combine to form a salt. The resulting solution will have a pH that is closer to neutral (pH 7) than either the original acid or base.

First, let's calculate the number of moles of NaOH used in the reaction:

10 mL NaOH x (1 L / 1000 mL) x (1/2) x (1 mol NaOH / 20 mL N/2 HCl) = 0.00025 mol NaOH

Since the acid and NaOH react in a 1:1 ratio, this means that there were also 0.00025 moles of acid used in the reaction.

Next, we can use the mass of the acid and its molecular weight to calculate the number of moles of acid:

2.362 g acid x (1 mol acid / 126 g acid) = 0.01873 mol acid

Since the acid and NaOH react in a 1:1 ratio, we know that there were 0.01873 moles of NaOH used in the reaction.

After the reaction, the solution was diluted to a total volume of 250 mL. This means that the concentration of the acid in the diluted solution is:

0.01873 mol / 0.25 L = 0.07492 M

Finally, we can use the information about the neutralization of the diluted solution to calculate the basicity of the acid:

10 mL diluted solution x (1 L / 1000 mL) x (1/10) x (1 mol acid / 1 mol H+) = 0.001 mol acid

This means that the 10 mL of diluted solution contained 0.001 moles of acid. Since the concentration of the diluted solution is 0.07492 M, the volume of the 10 mL of diluted solution contains:

0.001 mol / 0.07492 mol/L = 0.01335 L = 13.35 mL

This means that the 10 mL of diluted solution contains 13.35 mL of the original acid solution. Since the original acid solution was diluted from 50 mL to 250 mL, this means that the 13.35 mL of the original acid solution corresponds to:

13.35 mL x (50 mL / 250 mL) = 2.67 mL of the original acid solution

Therefore, the 2.67 mL of the original acid solution contained 0.001 moles of acid, which corresponds to a concentration of:

0.001 mol / 0.00267 L = 0.3745 M

The basicity of the acid is equal to the number of moles of NaOH that reacted with one mole of acid. Since we know that 0.00025 moles of NaOH reacted with 0.01873 moles of acid, the basicity of the acid is:

0.00025 mol NaOH / 0.01873 mol acid = 0.01336

Therefore, the basicity of the acid is 0.01336.

Learn more about  Neutralization from given link

https://brainly.com/question/23008798

#SPJ1

The acetal CH2CH2CH3(OCH3)-C-(H3CC)OCH3 molecule will disassemble into its component parts during hydrolysis. The ether bond (-C-O-) is broken during the reaction, which results in the creation of two alcohols.

Methanol (CH3OH) and 3-methyl-2-butanone are the end products (CH3COC2H5).

The structure of the larger organic product, 3-methyl-2-butanone, is

CH3

|

CH3-C=O

|

CH2-CH2-CH3

where the carbonyl group (-C=O) is attached to the middle carbon of the chain.

Acetals can be converted back into aldehydes or ketones by adding aqueous acid to them. Aldehydes or ketones are commonly referred to as being "deprotected" in this context.

When a salt of a weak acid or weak base (or both) is dissolved in water, hydrolysis of this type frequently takes place. Hydroxide anions and hydronium cations form naturally in water. Furthermore, the salt separates into its component anions and cations.

Because they can withstand numerous oxidizing and reducing agents as well as base hydrolysis, acetals are utilized as protective groups for carbonyl groups when synthesizing organic compounds.

learn more about hydrolysis of the acetal here

https://brainly.com/question/9652379

#SPJ1

Adding a catalyst to a chemical system at equilibrium does not result in the reaction fraction decreasing and the equilibrium constant increasing. Here options B and D are the correct answer.

Adding a catalyst to a chemical system at equilibrium can increase the rate of both the forward and reverse reactions, but it does not change the position of the equilibrium. The following are the possible effects of adding a catalyst:

A) The forward and reverse reaction rates are increased. This statement is true. A catalyst provides an alternate reaction pathway with a lower activation energy, which means more molecules can react in a given amount of time, resulting in an increase in both the forward and reverse reaction rates.

B) The reaction quotient decreases. This statement is not necessarily true. The reaction quotient (Q) depends on the concentrations of the reactants and products at any given point during the reaction. Adding a catalyst does not affect the concentrations of the reactants and products, so the reaction quotient remains the same.

C) The reaction quotient is unaffected. This statement is true. As mentioned above, the reaction quotient depends on the concentrations of the reactants and products, which are not affected by the addition of a catalyst.

D) The equilibrium constant increases. This statement is not true. The equilibrium constant is a constant value that depends only on the temperature and the stoichiometry of the balanced chemical equation. Adding a catalyst does not change the equilibrium constant value.

To learn more about chemical systems

https://brainly.com/question/12208104

#SPJ4

Complete question:

Which of the following are not the results of adding a catalyst to a chemical system at equilibrium? select all that apply:

A - the forward and reverse reaction rates are increased.

B - the reaction quotient decreases.

C - the reaction quotient is unaffected.

D - the equilibrium constant increases.

The type of alcohol with two other carbons attached to the carbon with the hydroxyl group is isopropanol or isopropyl alcohol (CH3)2CHOH.

Alcohol is an organic compound with a hydroxyl (OH) group bonded to a saturated carbon atom is called an alcohol. The simplest alcohols are methanol, ethanol, and propanol.The alcohol class is significant because it includes a variety of useful and prevalent compounds. A few examples of alcohols include ethanol, methanol, and isopropyl alcohol, isopropanol.

An alcohol is isopropyl alcohol or isopropanol (CH3)2CHOH, it's a colorless, flammable liquid that has a slightly sweet odor. It is miscible in water and most organic solvents and is used primarily as a solvent and rubbing alcohol. Isopropyl alcohol has been used as an antiseptic since the 1920s. Isopropyl alcohol's antiseptic properties are due to its ability to denature proteins.

Learn more about alcohol at:

https://brainly.com/question/29579537

#SPJ11

The concentration of dpip is 0.02 mmol/L.

To calculate the concentration of dpip, we can use the Beer-Lambert Law, which states that the absorbance (A) of a solution is directly proportional to the concentration (c) of the absorbing species and the path length (l) of the sample cell:

A = εcl

where;

In this case, we are given the absorbance value (A) and the molar extinction coefficient (ε), so we can rearrange the equation to solve for the concentration (c):

c = A / (εl)

Substituting the given values, we get:

c = 0.426 / (21.3/(mm cm) x 1 cm)

c = 0.426 / 21.3

c = 0.02 mmol/L

Learn more about concentration of dip here: https://brainly.com/question/19425369

#SPJ1

It is important to include reactions that contain the substrate but not the enzyme in your kinetic analysis to understand the substrate's effect on the reaction rate, independent of the enzyme.

It is a good idea to include reactions that contain substrate but not enzyme in your kinetic analysis because doing so will provide you with a control sample that will assist you in calculating the rate of reaction in the absence of enzyme. Therefore, the rate of reaction produced by this reaction will provide a benchmark against which the rate of reaction of the test sample containing enzyme can be measured.

Additionally, by including reactions that contain substrate but no enzyme, it is possible to measure the effects of other factors on the reaction rate. These factors may include temperature, pressure, pH, and the presence of inhibitors and activators.

In summary, including reactions that contain substrate but no enzyme in your kinetic analysis will enable you to quantify the effect of enzyme activity on the rate of reaction and understand the impact of other factors on the reaction rate.

Learn more about kinetic analysis at https://brainly.com/question/31106231

#SPJ11

Explanation:

25 g   *   (100 - 25 ) C  *  4.184  J / (g C)  = 7845 J