I need help
Write an equation for the table below.

I Need HelpWrite An Equation For The Table Below.

Answers

Answer 1

Answer:

5x1x5=712343x12x67=800

Step-by-step explanation:

Answer 2

Answer:

y = 5x

Step-by-step explanation:

y = water used (gal)

t = time (min)

y = 5x

This means for every minute, 5 gallons of water is used


Related Questions

the top of an l-shaped desk has the dimensions shown. what volume of wood is needed to make the top of the desk? complete the explanation of how you solved this problem.

Answers

The volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet

The top of an l-shaped desk has the dimensions shown in the diagram. To determine the volume of wood needed to make the top of the desk, we must use the formula for volume. The formula for volume is length times width times height, or V = lwh. In this case, the length of the top is 28 inches, the width is 45 inches, and the height is 0.75 inches.

Plugging these values into the volume formula gives us V = 28 x 45 x 0.75, which equals 1260 cubic inches. Since wood is typically sold in cubic feet, we must convert this volume to cubic feet by dividing it by 1728, the number of cubic inches in one cubic foot. 1260/1728 = 0.728, so the volume of wood needed to make the top of the desk is 0.728 cubic feet.

To summarize, the volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet. This was determined by using the volume formula, which is V = lwh, where l is the length, w is the width, and h is the height. The length, width, and height of the desk top were 28 inches, 45 inches, and 0.75 inches, respectively. By plugging these values into the volume formula and converting to cubic feet, we determined the volume of wood needed is 0.728 cubic feet.

See more about volume at: https://brainly.com/question/463363

#SPJ11

Using laws of logarithms, write the given expressions usingsums and/or differences of logarithmic expressions which donot contain the logarithms of products, quotients, or powers.a. log(45x) = log(45)+log(x). Previewb. log (x⁵⁵) = 55log(x). Previewc. 10 log(⁵√x) = 1/5log(x)^10. Preview2/5 log(x)¹⁰ syntax ok

Answers

Additionally, you should focus on answering the specific question being asked and ignore any typos or irrelevant parts of the question.

Using laws of logarithms, the given expressions can be written using sums and/or differences of logarithmic expressions which do not contain the logarithms of products, quotients, or powers as follows:

a.[tex] log(45x) = log(45) + log(x)b. log(x⁵⁵) = 55log(x)c. 10 log(⁵√x) = log(x)^(10/5) = log(x)^2 = 2log(x)2/5 log(x¹⁰) = (2/5)log(x) + (2/5)log(x) + ... + (2/5)log(x) (10 times)= 2log(x^10)[/tex]

for such more questions on logarithms

https://brainly.com/question/29779861

#SPJ11

I will give brainiest to whatever answered correctly.

Determine the inverse of the matrix
(5 -4)

( -8 6)


A) c^-1 =
(-5 8)

(4 -6)


B) c^-1 =
(6 4)

(8 5)


C) c^-1 =
(2.5 2)

(4 3)


D) c^-1 =
(-3 -2)

(-4 -2.5)

Answers

Step-by-step explanation:

that is the correct answer above

Answer:

So correct option is D)

Hope it helps you:)

what is 9 divided by 2.5

Answers

Answer: 3.6

Step-by-step explanation:

It's 3.6, hope it helped! :D

need help to this what would the variance be?

Answers

The variance of the set of data is 10. Option A

What is variance?

Variance can be defined as a statistical measurement of the spread of numbers in a data set.

It is used to measure how far each number in the set is distant from the mean and from every other number in the set.

It is sometimes described as the measure of variability.

It is denoted with the mathematical symbol,'σ²'

The formula for calculating the variance of a set of data is;

Variance = ∑(x-x⁻)²/n - 1

Substitute the values, we have;

Variance = 16 + 4 + 4 + 16 + 0/5 - 1

Add the values

Variance = 40/4

Divide the values

Variance = 10

Learn about variance at: https://brainly.com/question/15858152

#SPJ1

what central idea about mathematical instruction does the author express in passage 1?

Answers

An all-night study session can help you catch up on school assignments. The only way to become a straight-A student is efficient study habits.

Most students pseudo-work and end up wasting valuable time.

The correct option is (C)

This is based on an article about pseudo-working which is something that students do where they read for long hours and appear very serious in reading when in fact they do not focus on the reading and therefore end up not grasping much.

The author was trying to express that most students do this and that it is simply a waste of time which could have been spent actually studying.

The correct option is (C).

Learn more about Article at:

https://brainly.com/question/14172780

#SPJ4

The given question is incomplete, complete question is:

What central idea about studying does the author express in Passage 1?

A Straight-A students know how to work harder than other students.

B The only way to become a straight-A student is efficient study habits.

C Most students pseudo-work and end up wasting valuable time.

D An all-night study session can help you catch up on school assignments.

Find the area of the following
rhombus:
10 cm
6 cm
8 cm
A = [?] cm²

Answers

Answer:96

Step-by-step explanation:

[tex]Area=\frac{d1 d2}{2}[/tex]

[tex]Area=\frac{(6+6)(8+8)}{2}[/tex]

[tex]Area=96[/tex]

Name 2 figures for which all cross sections taken at a particular orientation
are congruent.

Answers

Answer: Rectangular prism & Cylinder

Step-by-step explanation: In geometry, a rectangular prism is a polyhedron with two congruent and parallel bases. It is also called a cuboid. A rectangular prism has six faces, and all the faces are in a rectangle shape and have twelve edges. Because of its cross-section along the length, it is said to be a prism.

A cylinder is a three-dimensional shape consisting of two parallel circular bases, joined by a curved surface. The center of the circular bases overlaps each other to form a right cylinder. The line segment joining the two centers is the axis, that denotes the height of the cylinder.

Liam has 11/4 packets of red clay.If he crafts a sculpture using 5/3 packets, how much clay does he have left?

Answers

Answer:

Step-by-step explanation:

Liam has 11/4 packets of red clay, which is equal to 33/12 packets of clay.

If he uses 5/3 packets of clay for crafting, he would have used 20/12 packets of clay.

To find how much clay he has left, we need to subtract the used amount from the original amount:

33/12 - 20/12 = 13/12

Therefore, Liam has 13/12 packets of clay left.

What is the slope of the line containing the midpoint of the segment with endpoints at (0, 0) and (2, 2) and the midpoint of the segment with endpoints at (5, 0) and (6, 2)? Express your answer in simplest form

Answers

The slope of the line containing the midpoint of the segment with endpoints at (0, 0) and (2, 2) and the midpoint of the segment with endpoints at (5, 0) and (6, 2) is 0.

When determining the slope of the line containing the midpoint of the segment with endpoints at (0, 0) and (2, 2) and the midpoint of the segment with endpoints at (5, 0) and (6, 2), there is a specific formula that can be used.

The formula for finding the slope of the line that contains the midpoints of two segments is:

[tex]\frac{y_2-y_1}{x_2-x_1}[/tex]

where the points (x1, y1) and (x2, y2) are the midpoints of the two segments.

Steps:1. Determine the midpoint of the first segment by using the midpoint formula:

[tex]\left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)[/tex]

The midpoint of the segment with endpoints at (0, 0) and (2, 2) is:

[tex](\frac{0+2}{2}, \frac{0+2}{2}) = (1, 1)2.[/tex]

Determine the midpoint of the second segment by using the midpoint formula:

[tex]\left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)[/tex]

The midpoint of the segment with endpoints at (5, 0) and (6, 2) is:

[tex](\frac{5+6}{2}, \frac{0+2}{2}) = (\frac{11}{2}, 1)3.[/tex]

Substitute the midpoints into the slope formula and simplify:

[tex]\frac{y_2-y_1}{x_2-x_1}=\frac{1-1}{\frac{11}{2}-1}=\frac{0}{\frac{9}{2}}=0[/tex]

for such more question on slope of the line

https://brainly.com/question/16949303

#SPJ11

Halla m∆1 y m∆2.

ayuda porfaa​

Answers

Hi! I understand that you want help finding the values of m∆1 and m∆2. To provide a step-by-step explanation, I need more information about the problem, such as the type of triangles, angles, or side lengths involved. Please provide more context or details, and I will be happy to help you.

#SPJ11

A person places $398 in an investment account earning an annual rate of 9.7%, compounded continuously. Using the formula V = Pe^{rt}V=Pe rt , where V is the value of the account in t years, P is the principal initially invested, e is the base of a natural logarithm, and r is the rate of interest, determine the amount of money, to the nearest cent, in the account after 7 years.

Answers

2233645999885689858896

A person has $785.35 after 7 years in the account.

What is continuous compound interest?

Interest that is compounded continuously to the principal amount. This interest rate provides exponential growth for a period of time.

The formula of continuous compound interest rate;

[tex]V = Pe^{rt}[/tex],

Where P is the principal amount, r is the interest rate and t is the time period.

A person places $398 in an investment account earning an annual rate of 9.7%, compounded continuously.

Using the formula:

[tex]V = Pe^{rt}[/tex], where P = $398, r = 0.097 (9.7% as a decimal), and t = 7 years, we can calculate the value of the account after 7 years as:

V = 398[tex]e^(0.0977)[/tex]

V = 398[tex]e^{0.679}[/tex]

V = 784.818126761

V = $785.35 (rounded to the nearest cent)

Therefore, the amount of money in the account after 7 years is $785.35.

To learn more about continuous compound interest;

https://brainly.com/question/18722165

#SPJ2

Write and solve an inequality Diego family tank

Answers

Answer:

please make me brainalist and keep smiling dude I hope you will

Step-by-step explanation:

The inequality represents the number of days Diego's father can drive the car without the warning light coming on is, The remaining fuel is greater than 1.5 gallons Diego's father can drive the car without the warning light coming on.

i have no idea abt any of this

Answers

Answer:

201.06 [tex]in^{2}[/tex]

Step-by-step explanation:

A = [tex]\frac{1}{4} \pi d^{2}[/tex]

A = [tex]\frac{1}{4} \pi (16)^{2}[/tex]

A = 201.06 [tex]in^{2}[/tex]

Answer:

divide 16 and use pi

pi is this π

π always equally 3.14

define "area "in the context​

Answers

Therefore, the area of the object or surface in this context would be 2 square meters.

What is length?

Length is a measure of the distance between two points. It is a physical quantity that describes the extent of an object or space in one dimension, usually measured in units such as meters, centimeters, feet, inches, etc. Length can also refer to the size or duration of something, such as the length of a book, the length of a movie, or the length of a period of time. In mathematics, length is also used to describe the size of a curve or a line segment, as well as the perimeter of a polygon or the circumference of a circle.

by the question.

In the context of length 2m and breadth 1m, the area refers to the measurement of the total amount of space that is covered by a two-dimensional object or surface within those dimensions.

The formula for calculating the area is:

Area = length x breadth

Substituting the given values, we get:

Area = 2m x 1m = 2 square meters

To learn more about perimeter:

https://brainly.com/question/30252651

#SPJ1

PLEASE HELP WITH EXPLANATION PLEASE PLEASE PLEASE NO SCAMMING FOR THE COINS OR I WILL REPORT YOU

Answers

The correct solutions for the given equation is given by table in option 3.

Explain about the solution of linear equation?

A straight line is produced when a linear equation, which is a two-variable equation, is graphed. The intersection of corresponding values which satisfy the equation results in the line.

The variables x and y are most frequently used in linear equations, hence the associated values can be shown as (x,y) on the coordinate plane, pairs. A collection of two maybe more linear equations is known as a system of linear equations.

The given equation is-

y = x - 6

Put the value of 'x' from the options and check for 'y', if its correct.

The option are the solution of the equation.

option 1:

y = x - 6

x = --5

y = -5 - 6 = -11  (incorrect)

option 2:

y = x - 6

Put x = -8

y = -8 - 6 = -14 (incorrect)

option 3:

y = x - 6

Put x = -7

y = -7 - 6 = -13 (correct)

Thus, the correct solutions for the given linear equation is given by table in option 3.

Know more about the linear equation

https://brainly.com/question/2030026

#SPJ1

Answer this for points

Answers

I think the answer is 6h + 35 = 80. 80= 6h + 35.

Find the area of each of the regular polygon below.

Round non-terminating decimals to the nearest hundredth.

nonagon (9 sided figure)

apothem = 16.5

side = 12

Answers

Rοunding tο the nearest hundredth, the area οf the nοnagοn is 891.00 square units.

What is the regular pοlygοn?

A regular pοlygοn is a pοlygοn that has all sides οf equal length and all angles οf equal measure.

Tο find the area οf a regular pοlygοn, we use the fοrmula:

Area = (1/2) × Perimeter × Apοthem

The perimeter οf a nοnagοn (9-sided figure) with a side length οf 12 is:

Perimeter = 9 × 12 = 108

Therefοre, the area οf the nοnagοn is:

Area = (1/2) × 108 × 16.5

Area = 891

Hence, Rοunding tο the nearest hundredth, the area οf the nοnagοn is 891.00 square units.

To learn more about regular polygon, Visit

https://brainly.com/question/1592456

#SPJ1

in general, which point size would you use if you wanted each character to be approximately one inch in size? a.) 1 pt b.) 72 pts c.) 24 pts d.) 36 pts

Answers

If you want each character to be approximately one inch in size, you would use a point size of 72 pts.

Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.

Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.

Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.

Therefore the correct answer is option b.) 72 pts.

To learn more about point size, refer:-

https://brainly.com/question/14052507

#SPJ4

there are 20 rows of seats on a concert hall: 25 seats are in the 1st row, 27 seats on the 2nd row, 29 seats on the 3rd row, and so on. if the price per ticket is $2,300, how much will be the total sales for a one-night concert if all seats are taken?

Answers

The total sales for a one-night concert with all seats taken will be $2,024,000.

To solve this problem, we need to find the total number of seats in the concert hall. We know that the first row has 25 seats, the second row has 27 seats, and the third row has 29 seats.

We can represent the number of seats in each row using an arithmetic sequence with a first term of 25 and a common difference of 2. The nth term of this sequence can be found using the formula:

a_n = a_1 + (n - 1)d

where a_1 is the first term (25), d is the common difference (2), and n is the number of the row.

Using this formula, we can find the number of seats in the 20th row

a_20 = 25 + (20 - 1)2

a_20 = 25 + 38

a_20 = 63

Therefore, the total number of seats in the concert hall is the sum of the seats in all 20 rows:

total seats = 25 + 27 + 29 + ... + 63

To find this sum, we can use the formula for the sum of an arithmetic sequence

S_n = (n/2)(a_1 + a_n)

where S_n is the sum of the first n terms of the sequence. In this case, n = 20, a_1 = 25, and a_n = 63.

S_20 = (20/2)(25 + 63)

S_20 = 10(88)

S_20 = 880

Therefore, there are a total of 880 seats in the concert hall. If all seats are taken, the total sales for the one-night concert will be

total sales = number of seats x price per ticket

total sales = 880 x $2,300

total sales = $2,024,000

Learn more about arithmetic sequence here

brainly.com/question/28882428

#SPJ4

in january , the temperature in parts of minnesota fell from f to f over a -hour period. what was the average temperature change per hour?

Answers

The average temperature change per hour was -2.708 degrees Fahrenheit.

To calculate the average temperature change per hour, we need to find the total temperature change over the 24-hour period and then divide by the number of hours.

The total temperature change is the difference between the starting temperature (41 degrees Fahrenheit) and the ending temperature (-13 degrees Fahrenheit), which is -54 degrees Fahrenheit.

Dividing the total temperature change by the number of hours, we get:

-54 degrees Fahrenheit / 24 hours = -2.25 degrees Fahrenheit per hour.

Rounding to three decimal places, we get an average temperature change per hour of -2.708 degrees Fahrenheit per hour.

The complete question is: In January 2008, the temperature in parts of Minnesota fell from 41∘41∘F to −13∘-13∘F over a 24-hour period. What was the average temperature change per hour?

To know more about average temperature change, refer here:

https://brainly.com/question/30856890#

#SPJ11

a camper attaches a rope from the top of her tent, feet above the ground, to give it more support. if she takes the rope to the ground feet from the middle of her tent, about how long is the rope from the ground to the tent?

Answers

4 feet.

The length of the rope from the ground to the top of the tent is 4 feet.

To calculate this, subtract the distance from the tent to the ground (2 feet) from the height of the tent (6 feet), and you will get the length of the rope (4 feet).

Learn more about length

brainly.com/question/30100801

#SPJ11

2.40 in a certain binary communication channel, it is equally likely to send a 1 or a 0 (both probabilities are equal to 1/2). the probability of an error given that a 1 is sent is 2/9, while the probability of an error given a 0 is sent is 1/9. (a) what is the probability that a 1 is received? (b) what is the (unconditional) probability that an error occurs? (c) what is the probability that a 1 was sent, given a 1 was received?

Answers

(a) The probability that a 1 is received is 4/9.

(b) The (unconditional) probability that an error occurs is 1/6.

(c)  The probability that a 1 was sent, given that a 1 was received, is 7/8.

To solve this problem, we can use Bayes' theorem and conditional probability.

(a) The probability that a 1 is received can be found using the law of total probability. We can calculate it by considering the probabilities of two mutually exclusive events: receiving a 1 when a 1 is sent and receiving a 1 when a 0 is sent.

Let P(1) be the probability that a 1 is sent and P(0) be the probability that a 0 is sent. Both probabilities are equal to 1/2 since they are equally likely.

The probability of receiving a 1 when a 1 is sent is 1 minus the probability of an error when a 1 is sent, which is 1 - (2/9) = 7/9.

The probability of receiving a 1 when a 0 is sent is the probability of an error when a 0 is sent, which is 1/9.

Using the law of total probability:

P(1 received) = P(1 sent) x P(1 received | 1 sent) + P(0 sent) x P(1 received | 0 sent)

P(1 received) = (1/2) x (7/9) + (1/2) x (1/9)

P(1 received) = 7/18 + 1/18

P(1 received) = 8/18

P(1 received) = 4/9

Therefore, the probability that a 1 is received is 4/9.

(b) The (unconditional) probability that an error occurs can be calculated by considering the probabilities of two mutually exclusive events: an error occurs when a 1 is sent and an error occurs when a 0 is sent.

Using the law of total probability:

P(Error) = P(1 sent) x P(Error | 1 sent) + P(0 sent) x P(Error | 0 sent)

P(Error) = (1/2) x (2/9) + (1/2) x (1/9)

P(Error) = 2/18 + 1/18

P(Error) = 3/18

P(Error) = 1/6

Therefore, the (unconditional) probability that an error occurs is 1/6.

(c) The probability that a 1 was sent, given that a 1 was received, can be calculated using Bayes' theorem:

P(1 sent | 1 received) = (P(1 sent) x P(1 received | 1 sent)) / P(1 received)

P(1 sent | 1 received )= (1/2) x (7/9) / (4/9)

P(1 sent | 1 received) = (1/2) x (7/9) * (9/4)

P(1 sent | 1 received) = 7/8

Therefore, the probability that a 1 was sent, given that a 1 was received, is 7/8.

To know more about probability follow

https://brainly.com/question/31024376

#SPJ12

if you have minimums and maximums that are far away (several standard deviations away from the mean) from the rest of the data observations, medians would be the best measure of central tendency?

Answers

Yes, if you have minimums and maximums that are several standard deviations away from the rest of the data observations, medians would be the best measure of central tendency.

Having minimums and maximums that are far away (several standard deviations away from the mean) from the rest of the data observations, medians would be the best measure of central tendency. This is because, when there are outliers or extreme values in a dataset, the mean can be influenced and it may not be an accurate representation of the central tendency.

However, the median is not affected by extreme values or outliers since it only depends on the middle value of the dataset. Therefore, if the dataset has outliers, it is better to use the median as a measure of central tendency to provide a more accurate representation of the data.

To know more about the "standard deviations": https://brainly.com/question/475676

#SPJ11

What is the value of angle h?

How do you know (what type of angle pairs are they)?

Answers

The value of h is 34.

What is the angle formed when two lines intersect?

Intersecting lines are two or more lines that have precisely one point in common. The point of junction is this central location that connects all of these lines. It should be observed that the intersecting lines only come together at one point, regardless of the angle at which they do so.The vertical angles are the opposing angle pairs created by two intersecting lines. Non-adjacent angles created by two crossing lines are known as opposite angles. Angles at opposite sides are equal. (equal in measure)

According to the Vertically opposite angle theorem, opposite angles are equal.

So, h = 34.

To know more about Angles visit:

https://brainly.com/question/28451077

#SPJ1

A cylindrical glass with a radius of 5 cm and a height of 20 cm is half full of milk. How
many milliliters of milk are in the glass? (1cm3
= 1ml)

Answers

There is 78.54 mI of miIk in the gIass.

What is VoIume of a cyIinder ?

The voIume of a cyIinder means the space inside the cyIinder that can hoId a specific amount of materiaI quantity. In simpIer words, the capacity of a cyIinder to hoId a thing is its voIume. Inside the space of a cyIinder, you can hoId either of the three types of matter – soIid, Iiquid, or gas. This capacity can onIy be witnessed in a three-dimensionaI cyIinder, i.e., you cannot hoId any Iiquid, soIid, or gas in a two-dimensionaI cyIinder.

The equation for the voIume of a cyIinder is V = Ah,

where A is the area of the base and h is the height.

Thus, the voIume can aIso be expressed as V = πr2h.

Find capacity of the gIass :

VoIume of the gIass = πr²h

Given radius = 5 ; Height = 2

VoIume of the gIass = π(5)²(2)

VoIume of the gIass = 157.08cm³

Find the voIume of the miIk :

If the gIass is haIf fuII,

VoIume of the miIk = 177.08 ÷ 2

VoIume of the miIk = 78.54 cm³

Convert cm³ to mI :

1 mI = 1000 cm³

78.54cm³ = 78.54 mI

There is 78.54 mI of miIk in the gIass.

To know more about volume

https://brainly.com/question/13338592

#SPJ1

suppose that a conveyor used to sort packages by size does not work properly. we test the conveyor on several packages (with h0:incorrect sort) and our data results in a p-value of 0.016. what probably happens as a result of our testing?

Answers

If the p-value of a hypothesis test is 0.016, it means that the probability of observing the data or more extreme data assuming the null hypothesis (i.e., the conveyor works properly) is 0.016. So, we reject the null hypothesis.

This p-value is relatively small and falls below the conventional significance level of 0.05. Therefore, we can reject the null hypothesis that the conveyor works properly and conclude that the conveyor is not sorting packages correctly.

However, we cannot determine the cause of the problem with the conveyor from this hypothesis test alone. Further investigation is necessary to identify the root cause of the issue and determine the appropriate corrective actions.

To know more about p-value:

https://brainly.com/question/30461126

#SPJ4

What is 102.5% of 80?

Answers

Answer:

Step-by-step explanation:

102.5/80=

82

Answer: 82

Step-by-step explanation:

First

Move the percent 2 times to the right to get a decimal.

102.5% ——> 1.025

Secondly

You’re dividing the part with the whole always to get the percent. So if we have the precent (converted into a decimal) and the whole. So we are finding the part. So to find the part we multiple 1.025 and 80.

Third

You solve now. So 1.025 x 80 = 82

PLEASE HELP MARKING BRAINLEIST JUST ANSWER ASAP

Answers

Answer: 35 Millimeters

Step-by-step explanation: Add all the numbers around your shape and you got the perimeter :)

Answer: 35 mm

Step-by-step explanation:

Add all sides together: 4+13+13+5 = 35

in cluster analysis, a method can be used to reduce bias due to the difference in units of measurement. one such method is called

Answers

In cluster analysis, a method can be used to reduce bias due to the difference in units of measurement. One such method is called standardization.

Cluster analysis is a data mining approach that is widely utilized in data processing, image analysis, and other data-based analytics applications. It groups items that have comparable characteristics into clusters by separating them from other objects that do not share the same features.

Standardization is the process of converting variables with various scales to a common scale so that they can be compared fairly.

Standardization involves transforming all of the variables into comparable units of measurement by converting them into z-scores. This allows for the comparison of values without being affected by the different units of measurement.

The method that can be used to reduce bias due to the difference in units of measurement in cluster analysis is standardization, which converts variables with various scales to a common scale so that they can be compared fairly. This ensures that each variable contributes equally to the distance between the clusters.


Know more about cluster analysis here:

https://brainly.com/question/30738647

#SPJ11

Other Questions
The measures of the angles of a triangle are shown in the figure below. Solve for x.(9x-1)7462 PLS HURRY!! efforts by corporations to reduce the vulnerability of their international supply chain to more traditional criminal activities is called group of answer choices security management. supply chain management. security studies. c-tpat. none of the above black smokers in the bottom of the ocean are evidence of active hydrothermal metamorphism. group of answer choices true false based on the information presented to you, and what your team is saying, which ethical approach would you like to take? which communication technology do wpan (wireless personal area network) devices, such as bluetooth, use to interfere with ieee 802.11g/n wlans? maria scored 92 points in 4 games at the same rate, how many points would she scored in 17 games Suppose Ben has a part-time business mowing lawns. He has mowed nine lawns on a given day the price he will receive to mow the tenth lawn is $20, and the marginal cost is $12. Bob should:a. mow the tenth lawn.b. not mow the tenth lawn.c. increase his marginal benefit.d. There is not enough information to decide. i don't want to hear what you have to say. give the dancers room to move, soon it will be midnight. who is the new year's fool this time? 6. object x of mass m travels toward object y of mass 2m in such a way that they collide. the table contains data about the velocities of object x and object y immediately before the collision and immediately after the collision. what are the change in momentum of the two-object system from immediately before the collision to immediately after the collision? Prepare a short report to make a quality of life of your family based on any ways when converse lets customers create and order shoes with custom color combinations from their website, this is an example of . multiple choice micromarketing. concentrated targeting. differentiated targeting. psychographic segmentation. undifferentiated targeting. which type of organization causes problems for effective democratic participation, according to max weber? an example of the loss of microbial antagonism would be the overgrowth of candida albicans during antibiotic therapy. true false Part A What is the cellular location of the stages of translation in bacteria and eukaryotes? a. nucleoid for bacteria and rough ER for eukaryotes b. cytosol for bacteria and nucleus for eukaryotes c. membrane for bacteria and cytosol and rough ER for eukaryotes d. cytosol for bacteria and cytosol, mitochondrion, and plastid for eukaryotes e. cytosol for bacteria and eukaryotes Determine whether segment lengths form a triangle. If so, classify the triangle as acute, right or obtuse.1. 10, 7, sqrt(658) a text-editing application uses binary sequences to represent each of 116 different characters. what is the minimum number of bits needed to assign a unique bit sequence to each of the possible characters? Marius's team leader has just texted him that an employee, who violated company policy by bringing in a file on her USB flash drive, has just reported that her computer is suddenly locked up with cryptomalware. Why would Marius consider this a dangerous situation? a. The employee would have to wait at least an hour before her computer could be restored. b. Cryptomalware can encrypt all files on any network that is connected to the employee's computer. c. The organization may be forced to pay up to $500 for the ransom. d. It sets a precedent by encouraging other employees to violate company policy. An industrial plant claims to discharge no more than 1000 gallons of wastewater per hour, on the average, into a neighboring lake. An environmental action group decides to monitor the plant, in case this limit is being exceeded. A random sample of 42 hours is selected over a period of a month. The data are unimodal and roughly symmetric. = 1138, s= 605, and Standard Error = 93.354 (a) Using StatCrunch, the p-value = (3 decimal places)(b) Are the conditions met to conduct this test? Yes, the population is approximately normal because n > 30.Yes, np and n(1-p) are both > 15.No, np and n(1-p) are not both > 15.Yes, because the data are approximately normal.(c) At alpha = 0.05, which of the following is the correct conclusion?Reject the null hypothesis. There is sufficient evidence that the wastewater discharged by the industrial plant exceeds 1000 gallons per hour.Do not reject the null hypothesis. There is evidence that the wastewater discharged by the industrial plant exceeds 1000 gallons per hour.Reject the null hypothesis. There is insufficient evidence that the wastewater discharged by the industrial plant exceeds 1000 gallons per hour.Do not reject the null hypothesis. There is insufficient evidence that the wastewater discharged by the industrial plant exceeds 1000 gallons per hour. fill in the blank h. how did the 11th amendment change article iii? the judicial power of the united states does not allow a ____ to be sued by citizens of _____ state, or by citizens or subjects of any ____ state. an ice cream shop sells single-scoop cones for $5, but its minimum acceptable price is $3. what is the ice cream shop's producer surplus?