The wheel's rotational inertia is 1.52 kg*m^2.
To solve for the rotational inertia, we can use the equation:
τ = Iα
where τ is the torque, I is the rotational inertia, and α is the angular acceleration.
Substituting the given values, we get:
34 N*m = I * 22.4 rad/s^2
Solving for I, we get:
I = 34 N*m / 22.4 rad/s^2
I = 1.52 kg*m^2
Therefore, the wheel's rotational inertia is 1.52 kg*m^2. Rotational inertia is a measure of an object's resistance to changes in its rotational motion, and it depends on the object's mass distribution and shape. In this case, the wheel's rotational inertia is determined solely by its mass distribution, which is affected by the distribution of mass within the wheel and the size and shape of the wheel itself.
Learn more about rotational inertia here:
https://brainly.com/question/31112002
#SPJ11
Air flows through a pipe at a rate of 200 L/s. The pipe consists of two sections of diameters 20 cm and 10 cm with a smooth reducing section that connects them. The pressure difference between the two pipe sections is measured by a water manometer. Neglecting frictional effects, determine the differential height of water between the two pipe sections. Take the air density to be 120kg/m3120kg/m3.
The differential height of water between the two pipe sections is approximately 0.03 meters.
What is differential height?
Differential height refers to the vertical distance or elevation change between two points or locations. It is commonly used in various fields, such as surveying, engineering, and geography, to quantify the difference in elevation between two specific points.
In surveying and engineering, differential height is often measured using leveling instruments or GPS (Global Positioning System) technology. These measurements help determine the relative height or elevation of different features on the Earth's surface, such as landmarks, buildings, terrain, or points along a surveyed route.
To determine the differential height of water, we can apply Bernoulli's equation between the two pipe sections. Assuming the air flow is steady and neglecting frictional effects, we can equate the pressures at the two sections:
P₁ + 0.5ρv₁² + ρgh₁ = P₂ + 0.5ρv₂² + ρgh₂
Since the pipe is smooth and the flow is incompressible, the velocities can be related by the continuity equation:
A₁v₁ = A₂v₂
where A₁ and A₂ are the cross-sectional areas of the pipe sections.
Given the diameters of the pipe sections, we can calculate their respective areas:
A₁ = πr₁², A₂ = πr₂²
where r₁ = 0.1 m and r₂ = 0.05 m.
Substituting these values, we can simplify the equation to:
P₁ + 0.5ρv₁² + ρgh₁ = P₂ + 0.5ρ(v₁²(r₁²/r₂²)) + ρgh₂
Since the pressure difference is measured by a water manometer, we can assume P₂ = P₁ and cancel out these terms. Rearranging the equation and solving for the differential height h₂ - h₁, we find:
h₂ - h₁ = (v₁²(r₁²/r₂²))/(2g)
Substituting the given values for v₁ (200 L/s = 0.2 m³/s) and the air density ρ (120 kg/m³), and considering g = 9.8 m/s², we can calculate:
h₂ - h₁ ≈ (0.2²(0.1²/0.05²))/(2×9.8) ≈ 0.03 m
Therefore, the differential height of water between the two pipe sections is approximately 0.03 meters.
To know more about height, refer here:
https://brainly.com/question/21649881#
#SPJ4
If a body is moving on a straight line the velocity of 80 m/s where it changes it's velocity to 200 m/s in 10 seconds .What is its acceleration.
The acceleration of the body is 12 meters per second squared m/[tex]s^2[/tex].
Acceleration is a measure of the rate of change in velocity. In the given problem, the body's velocity changes from 80 m/s to 200 m/s in 10 seconds.
To find the acceleration, we can use the below formula:
Acceleration = (Final Velocity - Initial Velocity) / Time
Substituting the given values :
Acceleration = (200 m/s - 80 m/s) / 10 seconds
Simplifying this equation:
Acceleration = 120 m/s / 10 seconds
Finally:
Acceleration = 12 m/[tex]s^2[/tex]
Therefore, the acceleration of the body is 12 meters per second squared m/[tex]s^2[/tex].
To learn more about acceleration ,
https://brainly.com/question/12550364
identify two sources of error. which method for measuring velocity do you think is more accurate? which method do you think is more precise?
Two sources of error are human error and instrument error. The more accurate method for measuring velocity is laser Doppler velocimetry, while the more precise method is the ultrasonic anemometer.
Human error includes mistakes in recording or reading data, while instrument error involves limitations or inaccuracies of the measuring device. There are various methods for measuring velocity, but laser Doppler velocimetry is considered more accurate due to its non-intrusive nature and ability to measure without disturbing the flow.
Ultrasonic anemometers, on the other hand, are known for their high precision as they can measure small changes in velocity with great sensitivity. However, they may not be as accurate overall as laser Doppler velocimetry. It's important to choose the appropriate method based on the specific needs and requirements of the task at hand.
Learn more about anemometer here:
https://brainly.com/question/1380217
#SPJ11
what is the wavelength of radiation that has a frequency of 5.39 × 1014 s–1?
To calculate the wavelength of radiation, we can use the formula:
wavelength = speed of light / frequency
The speed of light, denoted by "c," is approximately 3.00 x 10^8 meters per second.
Given the frequency of 5.39 x 10^14 s^(-1), we can substitute these values into the formula:
wavelength = (3.00 x 10^8 m/s) / (5.39 x 10^14 s^(-1))
Calculating this expression gives us:
wavelength ≈ 5.57 x 10^(-7) meters
Therefore, the wavelength of radiation with a frequency of 5.39 x 10^14 s^(-1) is approximately 5.57 x 10^(-7) meters.
Learn more about radiation from
https://brainly.com/question/893656
#SPJ11
brenda made the heliocentric model shown below to represent the sun, universe, mercury, and solar system. what does the symbol for d in brenda's diagram most likely represent? sun universe mercury
The symbol for "d" in Brenda's heliocentric model most likely represents the planet Mercury.
In the heliocentric model, the symbol "d" usually represents the planet Mercury because it is the planet closest to the Sun. The heliocentric model was proposed by Copernicus in the 16th century, and it states that the Sun is the center of the solar system, and all the planets revolve around it.
Brenda's diagram shows the Sun at the center, surrounded by the planets Mercury and Universe, as well as the entire solar system. Since Mercury is the planet closest to the Sun, it is most likely represented by the symbol "d" in the diagram. Overall, Brenda's heliocentric model is a simplified representation of the solar system and its components, and it helps us understand the relationships between the Sun, planets, and universe.
Learn more about heliocentric model here:
https://brainly.com/question/957540
#SPJ11
A mass is tied to a spring and begins vibrating periodically. The distance between its highest and its lowest position is 38cm. What is the amplitude of the vibrations?
by how much is the approximation [or in terms of coulomb's constant , ] in error at the center of a solenoid that is 13 cm long, has a diameter of 4 cm, is wrapped with turns per meter, and carries a current ?
the error in the approximation of Coulomb's constant at the center of the solenoid is undefined, since Coulomb's constant cannot be used to calculate the magnetic field at that point
To calculate the error in the approximation of Coulomb's constant at the center of a solenoid, we need to know the formula for the magnetic field inside a solenoid. This formula is given by:
B = μ₀ * n * I
where B is the magnetic field, μ₀ is the permeability of free space (a constant value), n is the number of turns per unit length, and I is the current flowing through the solenoid.
To calculate the error in Coulomb's constant, we need to compare this formula to the formula for the magnetic field generated by a point charge, which is given by:
B = (μ₀ * q) / (4π * r²)
where q is the charge of the point source and r is the distance from the source.
At the center of the solenoid, the distance from the source is zero, so we can simplify this equation to:
B = (μ₀ * q) / (4π * 0)
which is undefined.
Therefore, we cannot use Coulomb's constant to calculate the, at the center of a solenoid. Instead, we must use the formula given above:
B = μ₀ * n * I
where n is the number of turns per unit length. We can calculate the number of turns per meter by dividing the total number of turns by the length of the solenoid:
n = N / L
where N is the total number of turns and L is the length of the solenoid.
Plugging in the values given in the problem, we get:
n = 500 / 0.13 = 3846.15 turns/meter
Now we can calculate the magnetic field at the center of the solenoid:
B = μ₀ * n * I = (4π * 10^-7) * 3846.15 * I
We can simplify this equation to:
B = 1.2566 * 10^-3 * I
where I is the current flowing through the solenoid.
So . , we can calculate the magnetic field using the formula given above, which depends only on the current flowing through the solenoid and the number of turns per unit length.
to know more about, permeability visit
https://brainly.com/question/32006333
#SPJ11
A cube 6.0 cm on each side is made of a metal alloy. After you drill a cylindrical hole 3.0 cm in diameter all the way through and perpendicular to one face, you find that the cube weighs 6.60 N .
1. What is the density of the metal? (Include units)\rho =?
2. What did the cube weigh before you drilled the hole in it? (Include units)\omega =?
To find the density of the metal, we first need to find its volume. The cube originally had a volume of 6.0 cm x 6.0 cm x 6.0 cm = 216.0 cubic centimeters. When we drill a hole through it with a diameter of 3.0 cm, that leaves a cylindrical hole with a radius of 1.5 cm and a height of 6.0 cm. The volume of the hole can be calculated as follows:
V_hole = π x r^2 x h
= π x (1.5 cm)^2 x 6.0 cm
= 42.4 cubic centimeters
The remaining metal in the cube has a volume of:
V_metal = V_cube - V_hole
= 216.0 cubic centimeters - 42.4 cubic centimeters
= 173.6 cubic centimeters
Now we can calculate the density of the metal:
density = mass / volume
We're given that the weight of the cube is 6.60 N, but we need to convert that to mass in kilograms. We can use the acceleration due to gravity, g = 9.81 m/s^2, to do this:
weight = mass x g
6.60 N = mass x 9.81 m/s^2
mass = 0.671 kg
Therefore, the density of the metal is:
ρ = mass / volume
= 0.671 kg / 173.6 cm^3
= 0.00387 kg/cm^3
So the density of the metal is 0.00387 kg/cm^3.
To find the weight of the cube before drilling the hole, we can use the density we just calculated to find its mass, and then use that to find its weight. The volume of the cube is still 216.0 cubic centimeters, so its mass is:
mass = density x volume
= 0.00387 kg/cm^3 x 216.0 cm^3
= 0.835 kg
To find the weight, we can once again use the acceleration due to gravity:
weight = mass x g
= 0.835 kg x 9.81 m/s^2
= 8.19 N
So the cube weighed 8.19 N before the hole was drilled in it.
Learn more about weighed from
https://brainly.com/question/86444
#SPJ11
The 85 uF capacitor in a defibrillator unit supplies an average of 6500 W of power to the chest of the patient during a discharge lasting 5.0 ms. Part A To what voltage is the capacitor charged? Express your answer with the appropriate units
We can use the formula for the energy stored in a capacitor:
E = 1/2 * C * V^2
where E is the energy stored, C is the capacitance, and V is the voltage.
We can rearrange this formula to solve for V:
V = sqrt(2*E/C)
To find the voltage, we need to first calculate the energy stored in the capacitor:
E = P*t
where P is the power and t is the time duration of discharge.
Substituting the given values, we get:
E = 6500 W * 5.0 ms = 32.5 J
Now we can substitute E and C into the earlier equation to find V:
V = sqrt(2E/C) = sqrt(232.5 J / 85 μF) = 1114 V
Therefore, the capacitor is charged to 1114 volts.
Learn more about energy from
https://brainly.com/question/13881533
#SPJ11
a piece of metal weighing 18.4 g is heated to raise its temperature from 21.7 oc to 53.5 oc. it is found that the metal absorbed 262 j of heat in the process. Calculate the specific heat of the metal. Include appropriate units.
The specific heat of a substance is defined as the amount of heat required to raise the temperature of a unit mass of the substance by one degree Celsius. To calculate the specific heat of the metal, we can use the formula:
Heat absorbed (Q) = mass (m) * specific heat (c) * change in temperature (ΔT).
Given that the mass (m) of the metal is 18.4 g, the change in temperature (ΔT) is (53.5°C - 21.7°C) = 31.8°C, and the heat absorbed (Q) is 262 J, we can rearrange the formula to solve for the specific heat (c):
c = Q / (m * ΔT).
Substituting the given values, we have:
c = 262 J / (18.4 g * 31.8°C).
Note that the unit of mass must be converted to kilograms (kg) and the unit of temperature to Kelvin (K) for consistency:
c = 262 J / (0.0184 kg * 31.8 K).
Calculating this expression, we find:
c ≈ 454.97 J/(kg·K).
Therefore, the specific heat of the metal is approximately 454.97 J/(kg·K).
Hence, the specific heat of the metal is 454.97 J/(kg·K).
Learn more about specific heat here:
https://brainly.com/question/31608647
#SPJ11
a kangaroo can jump over an object 2.10 m high. calculate its vertical speed when it leaves the ground.
(b) How long is it in the air?
To calculate the kangaroo's vertical speed, we need to use the formula for vertical motion:
v^2 = u^2 + 2as
Where:
v = final velocity (which is zero at the highest point of the jump)
u = initial velocity (which is what we're trying to find)
a = acceleration due to gravity (-9.81 m/s^2)
s = vertical distance traveled (which is 2.10 m)
Plugging in the values, we get:
0 = u^2 + 2(-9.81)(2.10)
Simplifying:
u^2 = 41.346
Taking the square root:
u = 6.43 m/s
So the kangaroo's vertical speed when it leaves the ground is approximately 6.43 m/s.
To find how long the kangaroo is in the air, we can use the formula:
t = (v-u)/a
Where:
t = time
v = final velocity (which is zero)
u = initial velocity (which we just calculated to be 6.43 m/s)
a = acceleration due to gravity (-9.81 m/s^2)
Plugging in the values, we get:
t = (0-6.43)/(-9.81)
Simplifying:
t = 0.657 seconds
So the kangaroo is in the air for approximately 0.657 seconds.
We can use the following steps to calculate the kangaroo's vertical speed and time in the air.
Step 1: Apply the equation for maximum height:
The maximum height a projectile can reach (H) is related to its initial vertical velocity (v) and the acceleration due to gravity (g) through the following equation:
H = (v^2) / (2 * g)
Step 2: Plug in the known values:
In this case, H = 2.10 m, and g = 9.81 m/s^2 (acceleration due to gravity).
Step 3: Solve for the initial vertical velocity (v):
Rearrange the equation from Step 1 to find v:
v = sqrt(2 * H * g)
v = sqrt(2 * 2.10 m * 9.81 m/s^2)
v ≈ 6.43 m/s
Step 4: Calculate the time in the air (t):
Use the equation:
t = (2 * H) / v
t = (2 * 2.10 m) / 6.43 m/s
t ≈ 0.65 s
So, the kangaroo's vertical speed when it leaves the ground is approximately 6.43 m/s, and it is in the air for about 0.65 seconds.
To know more about speed visit
https://brainly.com/question/28224010
SPJ11
What angle in degrees is needed between the direction of polarized light and the axis of the polarization filter to reduce the incident light intensity by 66.3%?
When polarized light passes through a polarization filter, the intensity of the light transmitted depends on the angle between the direction of polarization of the incident light and the axis of polarization of the filter. The intensity of the transmitted light is given by Malus's law,
I = I₀ cos²θ
where I₀ is the intensity of the incident light and θ is the angle between the direction of polarization of the incident light and the axis of polarization of the filter.
To reduce the incident light intensity by 66.3%, we need to find the angle θ such that the transmitted intensity is 33.7% of the incident intensity. Let I = 0.337I₀, then
0.337I₀ = I₀ cos²θ
cos²θ = 0.337
Taking the square root of both sides, we get
cosθ = ±0.58
Since the angle θ must be between 0° and 90°, the only solution is
θ = arccos(0.58) ≈ 54.1°
Therefore, an angle of approximately 54.1 degrees is needed between the direction of polarized light and the axis of the polarization filter to reduce the incident light intensity by 66.3%.
Learn more about direction of polarization of the incident light from
https://brainly.com/question/5095829
#SPJ11
Trying to determine its depth, a rock climber drops a pebble into a chasm and hears the pebble strike the ground 3.02 s later.
(a) If the speed of sound in air is 343 m/s at the rock climber's location, what is the depth of the chasm? m
(b) What is the percentage of error that would result from assuming the speed of sound is infinite?
(a) To determine the depth of the chasm, we can use the equation:
depth = (1/2) * acceleration due to gravity * time^2
h = (1/2) * g * t^2
t = (3.02 s) / 2 = 1.51 s
speed of sound = distance / time
Since the pebble is dropped, the initial velocity is zero. The acceleration due to gravity is approximately 9.8 m/s^2.
Using the given time of 3.02 s, we can calculate the depth:
depth = (1/2) * 9.8 m/s^2 * (3.02 s)^2
depth ≈ 44.8 m
Therefore, the depth of the chasm is approximately 44.8 meters.
(b) To calculate the percentage of error resulting from assuming the speed of sound is infinite, we can compare the actual time for the sound to reach the rock climber with the time calculated using the assumption.
The time calculated assuming infinite speed of sound would be:
time_assumed = depth / speed of sound
Using the values obtained:
time_assumed = 44.8 m / 343 m/s ≈ 0.13 s
The percentage of error is then given by:
percentage of error = (actual time - assumed time) / actual time * 100%
percentage of error = (3.02 s - 0.13 s) / 3.02 s * 100%
percentage of error ≈ 95.7%
Therefore, assuming an infinite speed of sound would result in a percentage of error of approximately 95.7%.
Learn more about depth here
https://brainly.com/question/17123802
#SPJ11
You walk 60 m forward and then 40 m back in 20 s. What is your velocity?
a. 1 m/s
b. 2 m/s
c. 3 m/s
d. 5 m/s
Answer:
The velocity is 1 m/s.
Explanation:
The velocity is the displacement of an object per unit of time.The Person walked 60 m forward, then 40 m backward.The time taken to walk is 20 s.so, t = 20 s.The total Displacement is equal to the forward walk - the backward walk.Displacement =60 m -40 m =20 m.so, The formula for velocity is displacement divided by time.velocity = Displacement/Time velocity = 20 m / 20 s = 1 m/s.The final velocity of my walk is 1 m/sTo learn more about velocity,
brainly.com/question/22038177
brainly.com/question/24567267
brainly.com/question/19979064
considering the amount of time tglove it took for the glove to stop the ball, find the magnitude of the net force on the ball in newtons while it is in the glove.
When considering the amount of time it took for the glove to stop the ball, we can determine the magnitude of the net force on the ball while it is in the glove by using the equation
Fnet = mΔv/Δt, where Fnet is the net force, m is the mass of the ball, Δv is the change in velocity of the ball, and Δt is the time it took for the ball to come to a stop.
Let's assume that the ball has a mass of 0.2 kg and was moving at a velocity of 5 m/s before it was caught by the glove. If it took 0.1 seconds for the ball to come to a complete stop within the glove, we can find the magnitude of the net force on the ball while it is in the glove as follows:
Fnet = mΔv/Δt
Fnet = 0.2 kg x (-5 m/s)/0.1 s
Fnet = -10 N
The negative sign indicates that the direction of the net force is opposite to the direction of the ball's motion.
Therefore, the magnitude of the net force on the ball while it is in the glove is 10 N.
To know more about net force visit:
https://brainly.com/question/14361879
#SPJ11
a car travels along the following paths: i) 40 miles, 53.0° n of e ii) 60 miles, 25° n of w iii) 50 miles due south what direction is the car relative to his starting point?
To determine the direction of the car relative to its starting point, we can analyze the given paths and use vector addition to find the resultant displacement.
Displacement i) = 40 miles * cos(53.0°) in the x-direction + 40 miles * sin(53.0°) in the y-direction.
Displacement ii) = -60 miles * cos(25°) in the x-direction + 60 miles * sin(25°) in the y-direction
i) The car travels 40 miles in a direction 53.0° north of east.
We can represent this displacement as a vector by converting the magnitude and direction to Cartesian coordinates:
Displacement i) = 40 miles * cos(53.0°) in the x-direction + 40 miles * sin(53.0°) in the y-direction.
ii) The car travels 60 miles in a direction 25° north of west.
Similarly, we can represent this displacement as a vector:
Displacement ii) = -60 miles * cos(25°) in the x-direction + 60 miles * sin(25°) in the y-direction.
iii) The car travels 50 miles due south.
We can represent this displacement as a vector:
Displacement iii) = -50 miles in the y-direction.
To find the resultant displacement, we add the three displacement vectors:
Resultant Displacement = Displacement i) + Displacement ii) + Displacement iii)
By adding the x-components and y-components separately, we can determine the resultant vector's magnitude and direction relative to the starting point.
Once we have the resultant displacement vector, we can calculate its direction using trigonometry, specifically the inverse tangent function.
Please note that without specific numerical values for the components of the displacement vectors, we cannot provide a precise direction.
Learn more about vector here
https://brainly.com/question/27854247
#SPJ11
to do this, we can start by identifying the maximum charge allowed on each capacitor. so given that these capacitors are connected in series, what is the maximum charge that won't lead to breakdown?
The maximum charge allowed on each capacitor in a series connection is equal and the total maximum charge depends on the capacitance and voltage ratings.
When capacitors are connected in series, the total capacitance decreases while the voltage rating increases. The maximum charge allowed on each capacitor is determined by the voltage rating and capacitance, and the total maximum charge depends on the sum of the capacitance and voltage ratings.
To determine the maximum charge that won't lead to breakdown, one should calculate the equivalent capacitance of the series connection and use the voltage rating of the individual capacitors. If the charge on any one capacitor exceeds the maximum allowed, it can lead to a breakdown and the release of a high amount of energy.
Therefore, it is crucial to ensure that the maximum charge on each capacitor is within the safe limits to avoid any damage or failure of the circuit.
Learn more about capacitance here:
https://brainly.com/question/14746225
#SPJ11
a highway patrol officer uses a device that measures the speed of vehicles by bouncing radar waves off them and measuring the doppler shift. in one such instance, the outgoing waves had a frequency of 100 ghz and the returning echo had a frequency 16 khz higher. assume the officer is facing in the positive direction. arumugam,removed9b69f1c402494e4f52094f6c8a062f9bda1a82bbe89340b036ee1e5c49b9f206removed removed58b1e9a401041b69266daacea519e828d050d14013adc67f8c64697e40f2ef89removedtheexpertta - tracking id: 2m68-bb-99-41-89c5-30219. in accordance with expert ta's terms of service. copying this information to any solutions sharing website is strictly forbidden. doing so may result in termination of your expert ta account. show answer no attempt what was the horizontal component of the velocity, in meters per second, of the vehicle from which the radar waves were reflected? note that there are two doppler shifts in echoes. be certain not to round off until the end of the problem, because the effect is small.
The horizontal component of the velocity of the vehicle from which the radar waves were reflected is approximately -31.83 m/s.
To determine the horizontal component of the velocity of the vehicle, we can use the Doppler effect equation:
Δf/f = (v/c) * cosθ
Where:
Δf is the change in frequency (16 kHz),
f is the original frequency (100 GHz),
v is the velocity of the vehicle,
c is the speed of light (3 x 10^8 m/s),
θ is the angle between the direction of motion and the direction of the radar waves (assumed to be 0° in this case).
Rearranging the equation to solve for v:
v = (Δf/f) * (c / cosθ)
Substituting the given values:
v = (16 kHz / 100 GHz) * (3 x 10^8 m/s / cos0°)
Since cos0° = 1, we can simplify the equation:
v = (16 x 10^3) * (3 x 10^8) / (100 x 10^9)
Calculating the result:
v ≈ -31.83 m/s
The horizontal component of the velocity of the vehicle from which the radar waves were reflected is approximately -31.83 m/s. The negative sign indicates that the vehicle is moving in the opposite direction of the radar waves.
To know more about velocity, visit :
https://brainly.com/question/30559316
#SPJ11
a magnetic field of 5.00 t is applied to a bubble chamber to make the tracks of electrons identifiable by of the circles they move in. if a high-energy electron moves along an arc of a 6 cm circle, what is a linear momentum of the electron?
The linear momentum of the high-energy electron is 4.97 x 10^-23 kg m/s.
The formula for the momentum of an object is p = mv, where p is momentum, m is mass, and v is velocity. Since we are dealing with an electron, we can assume that its mass is 9.11 x 10^-31 kg.
We can use the equation for centripetal force to find the velocity of the electron:
F = mv^2/r = qvB,
where F is the force, q is the charge of the electron, B is the magnetic field, and r is the radius of the circle.
Solving for v,
we get v = sqrt(qBr/m).
Plugging in the given values,
we get
v = sqrt((1.6 x 10^-19 C)(5.00 T)(0.06 m) / (9.11 x 10^-31 kg))
v = 5.46 x 10^7 m/s.
Now we can use the formula for momentum to find the linear momentum of the electron:
p = mv
p = (9.11 x 10^-31 kg)(5.46 x 10^7 m/s)
p = 4.97 x 10^-23 kg m/s.
To know more about linear momentum, visit:
https://brainly.com/question/30754592
#SPJ11
Abdel, an electrician, does not know much about computers so he orders a custom computer with a 1000 W power supply. However, the maximum wattage the system needs is 500 W.
Which of the following statements are true? Select two
a. The power supply will only deliver up to 500 W of power and operate very efficiently. b. The 1000 W power supply will last longer than, for example, a 750 W power supply. c. Too much extra power will be drawn potentially creating an electrical hazard. d. The computer will run hotter than if using, for example, a 750 W power supply. e. The power supply will run hotter than if using, for example, a 750 W power supply.
The true statements are a) The power supply will only deliver up to 500 W of power and operate very efficiently and b) The 1000 W power supply will last longer than, for example, a 750 W power supply.
The power supply in a computer is designed to provide only the amount of power needed by the system, so in this case, it will deliver up to 500 W, even though its maximum capacity is 1000 W. This allows the power supply to operate efficiently without drawing excess power or creating an electrical hazard.
Additionally, a higher wattage power supply, like the 1000 W unit, will generally last longer because it is not being pushed to its maximum capacity, allowing for less wear and tear on the components. A power supply with a lower wattage, such as 750 W, may need to work harder to provide the necessary power, potentially reducing its lifespan.
Learn more about power supply here:
https://brainly.com/question/13179707
#SPJ11
what are the magnitude and direction of a vector that has an x component of −35.0 units and a y component of −60.0 units?
To find the magnitude and direction of a vector with given components, we can use the Pythagorean theorem and trigonometric functions.
x-component = -35.0 units
y-component = -60.0 units
Magnitude (|V|): The magnitude of the vector is given by the formula:
|V| = √(x^2 + y^2)
|V| = √((-35.0)^2 + (-60.0)^2)
|V| = √(1225 + 3600)
|V| = √4825
|V| ≈ 69.47 units
Direction (θ):
The direction of the vector is given by the formula:
θ = tan^(-1)(y/x)
θ = tan^(-1)(-60.0 / -35.0)
θ ≈ tan^(-1)(1.714)
θ ≈ 61.01 degrees (rounded to two decimal places)
Therefore, the magnitude of the vector is approximately 69.47 units, and the direction is approximately 61.01 degrees.
Learn more about Pythagorean here
https://brainly.com/question/4343914
#SPJ11
What is the value of the Fermi-Dirac distribution for energies greater than the Fermi energy, if the temperature is T=0K?
At absolute zero temperature (T=0K), according to the Fermi-Dirac distribution, the probability (f) of finding an electron with energy greater than the Fermi energy (E) is zero. This means that there are no available energy states for electrons above the Fermi energy at absolute zero temperature.
The Fermi-Dirac distribution is a quantum mechanical distribution that describes the occupancy of energy states by fermions, such as electrons. It takes into account the Pauli exclusion principle, which states that no two identical fermions can occupy the same quantum state simultaneously.
At T=0K, all available energy states up to the Fermi energy are filled by electrons, and no electrons can occupy energy states above the Fermi energy. Therefore, the value of the Fermi-Dirac distribution for energies greater than the Fermi energy at T=0K is zero.
learn more about "temperature":- https://brainly.com/question/27944554
#SPJ11
where is the fahrenheit temperature 5 times the celsius temperature?
To find the Fahrenheit temperature that is five times the Celsius temperature, we need to use the conversion formulas between Celsius and Fahrenheit. The formula to convert Celsius to Fahrenheit is F = 1.8C + 32, where F is the Fahrenheit temperature and C is the Celsius temperature.
To find the temperature where Fahrenheit is five times Celsius, we can set up the equation:
5C = F
Substituting the Fahrenheit conversion formula for F, we get:
5C = 1.8C + 32
Simplifying this equation, we can solve for C:
3.2C = 32
C = 10
So the Celsius temperature is 10 degrees. To find the Fahrenheit temperature, we can plug in C = 10 into the Fahrenheit conversion formula:
F = 1.8(10) + 32
F = 50
Therefore, the Fahrenheit temperature that is five times the Celsius temperature is 50 degrees Fahrenheit.
Fahrenheit temperature that is 5 times the Celsius temperature, we can use the formula relating Fahrenheit and Celsius temperatures:
F = (9/5)C + 32
We're looking for a situation where F = 5C, so let's set up an equation:
5C = (9/5)C + 32
Now, let's solve for C:
5C - (9/5)C = 32
(16/5)C = 32
Divide both sides by 16/5:
C = (32 * 5) / 16
C = 10
Now that we have the Celsius temperature, let's convert it back to Fahrenheit using the original formula:
F = (9/5) * 10 + 32
F = 18 + 32
F = 50
So, the Fahrenheit temperature is 5 times the Celsius temperature when it is 50°F (10°C).
To know more about Fahrenheit to Celsius conversion visit
https://brainly.com/question/4412213
SPJ11
What type of satellites do most communications companies prefer? These satellites stay in the same position above the Earth.
Most communications companies prefer geostationary satellites, as they stay in the same position above the Earth, providing consistent communication coverage.
Geostationary satellites are preferred by most communication companies because they maintain a fixed position relative to the Earth's surface. Orbiting at an altitude of approximately 35,786 kilometers (22,236 miles) above the equator, these satellites have an orbital period matching the Earth's rotation.
This allows them to provide consistent coverage to a specific area, which is essential for reliable communication services such as television broadcasting, telephone services, and internet connectivity. The benefits of using geostationary satellites include their ability to cover large geographic areas, provide continuous and stable communication links, and reduce the need for multiple satellites to maintain coverage. These advantages make geostationary satellites the preferred choice for most communication companies.
Learn more about geostationary satellites here:
https://brainly.com/question/31313575
#SPJ11
1. The length of a simple pendulum is 0.760 m, the pendulum bob has a mass of 365 grams, and it is released at an angle of 12-degree to the verticle. (a) With what frequency does it vibrate? Assume SHM. b) What is the pendulum bob's speed when it passes through the lowest point of the swing? c) What is the total energy stored in this oscillation, assuming no losses?
(a) To find the frequency of the simple pendulum, we can use the formula:
frequency (f) = 1 / period (T)
period (T) = 2π √(L / g)
Length of the pendulum (L) = 0.760 m
Acceleration due to gravity (g) = 9.8 m/s^2
T = 2π √(0.760 / 9.8)
The period of a simple pendulum can be calculated using the formula:
period (T) = 2π √(L / g)
where L is the length of the pendulum and g is the acceleration due to gravity.
Length of the pendulum (L) = 0.760 m
Acceleration due to gravity (g) = 9.8 m/s^2
First, let's calculate the period of the pendulum: T = 2π √(0.760 / 9.8)
Now we can find the frequency: f = 1 / T
(b) To find the speed of the pendulum bob at the lowest point of the swing, we can use the equation for the speed of an object in simple harmonic motion: speed (v) = √(2gh)
where h is the vertical distance from the highest point to the lowest point of the swing.
Given: Angle to the vertical (θ) = 12 degrees
To find h, we can use trigonometry: h = L - L cos(θ)
(c) To find the total energy stored in the oscillation, assuming no losses, we can use the equation: total energy = potential energy + kinetic energy
The potential energy of the pendulum bob at the highest point is given by: potential energy = mgh
where m is the mass of the bob and h is the vertical distance from the highest point to the lowest point.
The kinetic energy of the pendulum bob at the lowest point is given by:
kinetic energy = (1/2)mv^2
where m is the mass of the bob and v is the speed at the lowest point.
Given: Mass of the pendulum bob (m) = 365 grams
Now we can calculate the potential energy and kinetic energy, and then find the total energy.
Please provide the value of g (acceleration due to gravity) so I can proceed with the calculations.
Learn more about frequency here
https://brainly.com/question/254161
#SPJ11
For the circuit shown in the drawing, what is the voltage Vi across resistance R1? (Ohm's law: V-IR, Icurrent) (d) R+R (b) R (c) r
The voltage Vi across resistance R1 in the given circuit is (d) R+R.
Determine the voltage?In the circuit, the resistors R and R1 are connected in series. According to Ohm's law, the voltage across a resistor is equal to the product of the current flowing through it and its resistance.
In this case, since resistors R and R1 are in series, the current passing through both resistors is the same. Therefore, the voltage across R1 is equal to the voltage across R.
Hence, the voltage Vi across resistance R1 is the same as the voltage across R, which is represented by option (d) R+R.
To know more about voltage, refer here:
https://brainly.com/question/32002804#
#SPJ4
a flywheel slows from 558 to 400 rev/min while rotating through 28 revolutions. (a) What is the angular acceleration of the flywheel? (b) How much time elapses during the 28 revolutions?
(a) To calculate the angular acceleration of the flywheel, we can use the formula:
Angular acceleration (α) = (final angular velocity - initial angular velocity) / time
The initial angular velocity (ωi) is given as 558 rev/min, and the final angular velocity (ωf) is given as 400 rev/min. To use consistent units, we need to convert the angular velocities to radians per second (rad/s):
ωi = 558 rev/min * (2π rad/rev) * (1 min/60 s) ≈ 58.48 rad/s
ωf = 400 rev/min * (2π rad/rev) * (1 min/60 s) ≈ 41.89 rad/s
The time (t) is not given directly, but we can determine it by dividing the number of revolutions (28) by the change in angular velocity:
t = number of revolutions / (ωf - ωi)
t = 28 rev / (41.89 rad/s - 58.48 rad/s)
t = 28 rev / (-16.59 rad/s)
Since the angular acceleration (α) is defined as the change in angular velocity per unit time, we can substitute the calculated time into the formula for angular acceleration:
α = (ωf - ωi) / t
α = (41.89 rad/s - 58.48 rad/s) / (-16.59 rad/s)
Simplifying the expression, we find:
α ≈ -0.998 rad/s^2
Therefore, the angular acceleration of the flywheel is approximately -0.998 rad/s^2 (negative sign indicates deceleration).
(b) To calculate the time elapsed during the 28 revolutions, we can use the formula:
Time elapsed = number of revolutions / angular velocity
Since the number of revolutions is given as 28 and the angular velocity is calculated as ωi ≈ 58.48 rad/s, we can substitute these values into the formula:
Time elapsed = 28 rev / 58.48 rad/s
Simplifying the expression, we find:
Time elapsed ≈ 0.479 s
Therefore, approximately 0.479 seconds elapse during the 28 revolutions of the flywheel.
Learn more about angular velocity here:
https://brainly.com/question/32217742
#SPJ11
A playground toy has four seats, each 6.4kg , attached to very light rods of length r= 1.5m , as seen from below in the figure.
The moment of inertia about the rotation axis for the given playground toy, with two children sitting opposite each other, is approximately 145.35 kg·m².
To determine the moment of inertia about the rotation axis for the given playground toy, we need to consider the contributions from the seats and the two children.
Given:
Mass of each seat = 6.4 kg
Length of the rods (r) = 1.5 m
Mass of the first child (m₁)= 16 kg
Mass of the second child (m₂) = 23 kg
The moment of inertia of each seat can be calculated using the formula for the moment of inertia of a point mass about an axis:
[tex]I_{seat} = m_{seat times} r^2[/tex]
For each seat, the moment of inertia is:
[tex]I_{seat} = 6.4 kg times (1.5 m)^2= 14.4 kg\cdot m^2[/tex]
Now, to calculate the moment of inertia contributed by the children, we need to consider that the children are located opposite each other. Assuming the axis of rotation passes through the center of mass of the children-seats system, the moment of inertia for each child is:
[tex]I_{child} = m_{child times} r^2[/tex]
For the first child (m₁):
[tex]I_1 = 16 kg times (1.5 m)^2 = 36 kgm^2[/tex]
For the second child (m₂):
[tex]I_2 = 23 kg times (1.5 m)^2 = 51.75 kgm^2[/tex]
Finally, we can calculate the total moment of inertia by summing the contributions from the seats and the children:
Total moment of inertia =[tex]4 times I_{seat} + I_1 + I_2[/tex]
= [tex]4 times (14.4 kgm^2) + 36 kgm^2 + 51.75 kgm^2[/tex]
= [tex]57.6 kgm^2 + 36 kgm^2 + 51.75 kgm^2[/tex]
= [tex]145.35 kgm^2[/tex]
Learn more about the calculation of the moment of inertia here:
https://brainly.com/question/30051108
#SPJ4
a photographer wishes to use safety light in the darkroom that will emit low-energy photons. the best color of this light would be
The best cοlοr οf safety light tο use in a darkrοοm wοuld be red light.
What is Red light?Red light has the lοwest energy amοng visible light cοlοrs. It has a lοnger wavelength and lοwer frequency cοmpared tο οther visible light cοlοrs such as blue οr green.
Using lοw-energy red light in the darkrοοm helps tο minimize the risk οf expοsing light-sensitive materials, such as phοtοgraphic film οr light-sensitive chemicals, tο high-energy phοtοns that cοuld pοtentially cause unwanted reactiοns οr fοgging. Red light prοvides sufficient illuminatiοn fοr wοrking in the darkrοοm while minimizing the pοtential fοr light damage.
Therefοre, a phοtοgrapher wοuld typically chοοse a safety light that emits lοw-energy red phοtοns fοr use in a darkrοοm.
To learn more about Red light, visit.
https://brainly.com/question/13032688
#SPJ4
a rod 47 cm long moves in a plane perpendicular to a magnetic field of 770. g. the velocity of the rod is perpendicular to its length. find the speed of the rod if the potential difference between the ends is 6.1 v.
The speed οf the rοd is apprοximately 16.5 meters per secοnd.
What is speed ?In everyday use and in kinematics, the speed (cοmmοnly referred tο as v) οf an οbject is the magnitude οf the change οf its pοsitiοn οver time οr the magnitude οf the change οf its pοsitiοn per unit οf time; it is thus a scalar quantity.
The rate οf change οf pοsitiοn οf an οbject in any directiοn. Speed is measured as the ratiο οf distance tο the time in which the distance was cοvered. Speed is a scalar quantity as it has οnly directiοn and nο magnitude.
We can use the fοrmula fοr the induced vοltage in a cοnductοr mοving thrοugh a magnetic field.
The induced vοltage (V) can be calculated using the fοrmula:
V = B * l * v
where:
V is the induced vοltage,
B is the magnetic field strength,
l is the length οf the cοnductοr, and
v is the velοcity οf the cοnductοr.
Rearranging the fοrmula tο sοlve fοr v:
v = V / (B * l)
Substituting the given values:
v = (6.1 V) / (770 x 10^(-4) T * 0.47 m)
Simplifying:
v ≈ 16.5 m/s
Therefοre, the speed οf the rοd is apprοximately 16.5 meters per secοnd.
To learn more about speed , visit.
brainly.com/question/13921605
#SPJ4