if the retina is 1.7 cm from the lens in the eye, how large is the image on the retina of a person of height 1.8 m standing 8.0 m away?

Answers

Answer 1

The image size on the retina of a person of height 1.8 m standing 8.0 m away is: 0.094 cm.

The size of the image on the retina of a person of height 1.8 m standing 8.0 m away is determined by the size of the object, the distance between the object and the lens, and the distance between the lens and the retina.

The image size on the retina is inversely proportional to the distance between the object and the lens and is directly proportional to the distance between the lens and the retina. In this case, the object is 1.8 m away and the lens is 1.7 cm from the retina.

Therefore, the image size on the retina is (1.7 cm/1.8 m) times 8.0 m, or 0.094 cm. This means that the image size on the retina of a person of height 1.8 m standing 8.0 m away is 0.094 cm.

To know more about retina refer here:

https://brainly.com/question/13993307#

#SPJ11


Related Questions

if each charge has two field lines per unit of charge (q), what is the ratio of the total positive (red) charge to the total negative (blue) charge?

Answers

The ratio of total positive charge (red) to total negative charge (blue) is 1:1. This is because for each unit of charge (q), there are two field lines, one for the positive charge and one for the negative charge.

What are field lines?

Field lines are a visual tool used to represent the direction and strength of an electrical field. The direction of a field line shows the direction of the force that a positive test charge would experience if it were placed at that point in the field. Meanwhile, the density of the field lines indicates the strength of the electric field.

Since each charge has two field lines per unit of charge (q), it means that the total number of field lines is proportional to the total charge. If there are equal numbers of field lines coming from both the positive and negative charges, it means that the ratio of the total positive charge to the total negative charge is 1:1.

Read more about electricity:

https://brainly.com/question/24786034

#SPJ11

which of the following is not an example of mechanical action? group of answer choices electrically charged beaters of the bells on the clavecin electrique digital sampling machines levers and hammers inside an acoustic piano rotors (tonewheels) of a telharmonium

Answers

Digital sampling machines are not an example of mechanical action.

What is mechanical action?

Mechanical action refers to the physical movement of mechanical components to produce a sound or perform a specific function. This can include a wide range of actions, such as the striking of hammers on strings in a piano, the rotation of tonewheels in a Hammond organ, or the movement of valves in a trumpet.

Mechanical action can also be found in other types of machinery and equipment, and tools such as engines, gears, and levers, where physical movement is used to perform a specific task or function.

Learn about mechanical energy here https://brainly.com/question/30692822

#SPJ1

you throw a 0.80kg snowball at 7.0m/s straight down off a 5.0m tall bridge

Answers

The kinetic energy of the snowball just before it hits the ground is 19.6 joules.

How to calculate the kinetic energy?

To determine the kinetic energy of the snowball just before it hits the ground, we can use the formula for kinetic energy:

KE = 1/2 m v²

where KE is the kinetic energy, m is the mass of the snowball, and v is the velocity of the snowball just before it hits the ground.

In this case, we know that the mass of the snowball is 0.80 kg and the velocity just before it hits the ground is equal to the initial velocity with which it was thrown (7.0 m/s) since air resistance is assumed to be negligible. Therefore, we can substitute these values into the formula:

KE = 1/2 * 0.80 kg * (7.0 m/s)²

KE = 19.6 J

Therefore, the kinetic energy of the snowball just before it hits the ground is 19.6 joules.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ9

Correct question is:

You throw a 0.80kg snowball at 7.0m/s straight down off a 5.0m tall bridge then what is the kinetic energy of the snowball just before it hits the ground?

a portable cd player uses a current of 7.5 ma at a potential diference of 3.5 v. how much energy does the player use in 35 s?

Answers

A portable CD player uses 7.5mA of current at a potential difference of 3.5V.  Since it is running for 35 seconds, the total energy consumed in that time is  calculated by the product of potential difference, current and time consumed and it is solved as 918.75mJ.


The amount of energy used by the portable CD player can be calculated using the formula:

E = VIt

where E is the energy, V is the potential difference, I is the current and t is the time.

The portable CD player uses a current of 7.5 mA at a potential difference of 3.5 V.

Thus, the energy used by the player in 35 seconds can be calculated as follows:

[tex]E = VIt\\ = 3.5 V \times 7.5 mA \times35 s \\= 918.75 mJ[/tex]

Therefore, the portable CD player uses 918.75 mJ of energy in 35 seconds.

For further details on potential difference, click on the below link:

https://brainly.com/question/12918923

#SPJ11

The trachea is found ______ to the esophagus; connects the larynx to primary bronchi; inferiorly the trachea divides into right and left ______ ______.

Answers

The trachea is found anterior to the esophagus; connects the larynx to primary bronchi; inferiorly the trachea divides into right and left main bronchi.

The trachea is around 10-12 cm long and 2-3 cm wide, and it is made up of cartilage rings that support the tube and keep it from collapsing during inhalation. Lining the trachea is ciliated mucosa, which captures and eliminates foreign particles and mucus from the respiratory system. Mucus is also secreted by the mucosa to assist moisten and warm the inspired air. The trachea splits inferiorly into right and left primary bronchi, which divide further into secondary and tertiary bronchi, finally delivering air to the lungs. The trachea is a tube.

learn more about   trachea here:

https://brainly.com/question/13874056

#SPJ4

suppose i drop a football from a tall building, and 4 seconds elapse before it hits the ground. neglecting air resistance, roughly how fast is the football moving upon impact?

Answers

The football is moving at approximately 59 meters/second (212.3 kilometers/hour) upon impact, neglecting air resistance.

The football is moving at approximately 59 meters/second (212.3 kilometers/hour) upon impact, neglecting air resistance. This can be calculated using the equation s=1/2at^2, where 's' is the displacement, 'a' is the acceleration due to gravity (9.8m/s^2), and 't' is the time of the fall (4 seconds). Therefore, the displacement is s=1/2(9.8m/s^2)(4s)^2, which simplifies to s=78.4m.
Since the displacement is known (78.4m), the velocity can be determined using the equation v^2=u^2+2as, where 'v' is the velocity upon impact, 'u' is the initial velocity (0m/s), and 'a' is the acceleration due to gravity (9.8m/s^2). Therefore, the velocity is v=sqrt(2as), which simplifies to v=sqrt(2(9.8m/s^2)(78.4m)), which simplifies to v=59m/s.
This is the speed of the football upon impact, neglecting air resistance. This assumes that the football is dropped from rest, and experiences a uniform acceleration throughout the fall, which is due to gravity. The acceleration due to gravity is a constant 9.8m/s^2, regardless of the speed of the falling object.

For more such questions on Displacement.

https://brainly.com/question/28523671#

#SPJ11

describe an experiment you could perform to determine if the mass of a cart has any effect on the amount of energy needed to overcome friction

Answers

Answer:

You can perform an experiment to determine if the mass of a cart has any effect on the amount of energy needed to overcome friction. To do this, you will need a cart, something to put on the cart to increase its mass, a surface with a known coefficient of friction, a ruler or measuring tape, and a scale.


First, measure the distance the cart needs to travel over the surface. Then, measure the mass of the cart without any additional weight. Place the cart at the starting point of the measured distance and release it, timing how long it takes to travel the measured distance. Record this time and repeat this step three times.


Next, add a known mass to the cart and repeat the experiment, measuring how long it takes for the cart to travel the measured distance. Record this time and repeat this step three times. Finally, compare the times for the cart with and without the additional weight and note any differences.


This experiment can be used to determine if the mass of a cart has any effect on the amount of energy needed to overcome friction.



Learn more about friction here:


https://brainly.com/question/28356847#



#SPJ11

a wrench is used to tighten a nut. a 15n perpendicular force is applied 50cm away from the axis of rotation, and moves a distance of 10 cm as it turns. what is the torque applied to the wrench?

Answers

The torque applied to the wrench can be calculated using the formula:

torque = force x distance

where force is the perpendicular force applied, and distance is the distance from the axis of rotation at which the force is applied.

So, torque = 15 N x 0.5 m = 7.5 Nm

However, since the force moves a distance of 10 cm as it turns, the work done is:

work = force x distance moved = 15 N x 0.1 m = 1.5 J

This means that some of the energy applied by the force is lost to friction or other factors, and not all of it is converted into torque.

Learn more about torque at: https://brainly.com/question/17512177

#SPJ11

true or false: electrically neutral objects have no positive or negative charges, that is why they are neutral

Answers

True, electrically neutral objects have no positive or negative charges, that is why they are neutral.

Electrically neutral objects have an equal number of protons and electrons, so the total charge on the object is zero. This is why we refer to the object as being ‘neutral’. It has no charge.

In a chemical reaction, protons are transferred between particles, such as atoms or ions. When an atom loses or gains protons, its charge changes, either becoming more negative or more positive.

An atom which has the same number of protons and electrons has a net charge of zero and is neutral.

In an electric field, a neutral object experiences no force due to the absence of electric charge on its surface. When placed in a magnetic field, however, a neutral object still experiences a force due to its electrons.

Electrons have a magnetic moment, so they are affected by the magnetic field, causing the neutral object to move.

Electrically neutral objects have no positive or negative charges, that is why they are neutral.

Their charge is zero, so they are not affected by electric fields, but still experience a force in a magnetic field due to the magnetic moment of their electrons.

to know more about neutral refer here:

https://brainly.com/question/15395418#

#SPJ11

a semi-circular gate on an inclined wall is in contact with water. calculate the resultant force of the water on the gate

Answers

The resultant force of the water on the semi-circular gate on an inclined wall can be calculated using the equations of hydrostatics.

R = √([tex]F1^2 + F2^2 - 2*F1*F2*cos[/tex])α, where 'R' is the resultant force and 'α' is the angle of the wall.

First, determine the pressure of the water at any given point along the gate. To do this, multiply the density of the water, 'ρ', by the acceleration of gravity, 'g', and then the vertical height of the water relative to the gate, 'h', to get the pressure 'p':

p = ρ*g*h

Second, determine the force acting on the gate. This is done by multiplying the pressure with the area of the gate, 'A':

F = p*A

Finally, find the resultant force, 'R', by adding the forces together and taking into account the angle of the wall:

R = √([tex]F1^2 + F2^2 - 2*F1*F2*cos[/tex])α

where α is the angle of the wall.

By following these steps, you can calculate the resultant force of the water on the semi-circular gate on an inclined wall.

For more questions related to Force.

https://brainly.com/question/13191643

#SPJ11

assuming that the magnetic field is uniform between the pole faces and negligible elsewhere, write an expression for the induced emf in the coil.

Answers

The induced EMF (electromotive force) in a coil can be calculated using Faraday's Law of Electromagnetic Induction:

EMF = -N(dΦ/dt)

What is the induced emf?

In a uniform magnetic field, the flux through the coil can be calculated as:

Φ = BAcos(θ)

where B is the magnitude of the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the coil.

Assuming that the coil is moving perpendicular to the magnetic field (θ = 0), the rate of change of flux is:

dΦ/dt = BA(d/dt)(cos(0))

= 0

Therefore, the induced EMF in the coil is zero.

However, if the coil is moving at an angle to the magnetic field, or if the magnetic field is changing in time, then the induced EMF will not be zero and can be calculated using the above equations.

Learn more about induced emf:https://brainly.com/question/16764848

#SPJ1

Which are true about Halogens? (please choose all that apply)
a) Reactive
b) Group 7A
c) Non-metals
d) Metals
e) Non-reactive

Answers

Answer:

the answer is a number

Explanation:

support me

a photon in the rest frame of a star has a wavelength of 780 nm. an observer on earth measures it to be at a wavelength of 768 nm. the star is then:

Answers

The star is moving away from the observer. An observer on the Earth measured the wavelength of a photon as 768 nm, while the photon's rest wavelength was 780 nm.

What is the Doppler effect?

According to the Doppler effect, if the wavelength of the wave is measured at different positions, it will shift. In this situation, the observer on the Earth is seeing a shift in the photon's wavelength due to the motion of the star.

To be more specific, when the star moves away from the observer, the observer observes an increase in the wavelength. Therefore, the star is moving away from the observer.

To know more about the Doppler effect:

https://brainly.com/question/5871604

#SPJ11

explain why adding charge to a bee causes hairs on the bee's body to bend more in response to a field.

Answers

Insects use their hair-like mechanoreceptors to detect electrical fields around them. This electrical charge causes the hairs to move and bend towards the source of the field.

Explanation:

Bee hair is also sensitive to static electricity. As bees collect pollen, they become negatively charged, causing the pollen to become positively charged. This charge difference makes it easier for pollen to stick to the bees' hairy bodies and legs.

Therefore, when a bee is charged with static electricity, it becomes easier for its hairs to detect the electrical fields around it. As a result, the hairs on the bee's body will bend more in response to the electrical field.


Learn more about static electricity here:

https://brainly.com/question/12791045#


#SPJ11

To be able to calculate the energy of a charged capacitorand to understand the concept of energy associated withan electric field.The energy of a charged capacitor is given byU= QV/2, where Q is the charge of the capacitor andV is the potential difference across the capacitor. Theenergy of a charged capacitor can be described as theenergy associated with the electric field created insidethe capacitor.In this problem, you will derive two more formulas for theenergy of a charged capacitor; you will then use aparallel-plate capacitor as a vehicle for obtaining theformula for the energy density associated with an electricfield. It will be useful to recall the definition ofcapacitance, C = Q/V, and the formula for thecapacitance of a parallel-plate capacitor,Co A/d, where A is the area of each of the platesand d is the plate separation. As usual, eo is thepermittivity of free space.

Answers

The energy of a charged capacitor can also be written as [tex]U = \frac {CV^2}{2}[/tex] and [tex]U = \frac {Q^2d}{2\epsilon_o A}[/tex].

To derive two more formulas for the energy of a charged capacitor, we start with the definition of capacitance:

C = Q/V

Solving for Q, we get:

Q = CV

Substituting this expression for Q into the original formula for the energy of a charged capacitor, [tex]U = QV/2[/tex], we get:

[tex]U = (CV)V/2[/tex]

[tex]U = CV^2/2[/tex]

This is one of the additional formulas for the energy of a charged capacitor.

Next, we can use the formula for the capacitance of a parallel-plate capacitor to derive the energy density associated with an electric field. The capacitance of a parallel-plate capacitor is given by:

[tex]C = \epsilon _o A/d[/tex]

where εo is the permittivity of free space, A is the area of each plate, and d is the distance between the plates. Solving this equation for the potential difference, V, we get:

[tex]V = Q/C[/tex]

[tex]V = Q/(\epsilon_o A/d)[/tex]

[tex]V = Qd/(\epsilon_o A)[/tex]

Substituting this expression for V into the formula for the energy of a charged capacitor, [tex]U = QV/2[/tex], we get:

[tex]U = \frac {Q^2d}{2\epsilon_o A}[/tex]

This expression gives us the energy associated with the electric field in the capacitor.

Learn more about capacitors:

https://brainly.com/question/21851402

#SPJ11

Two crates are dropped from the same height in a vacuum. The mass and force of the crates are shown in the diagram. Which of the following statements is supported by the data?


The momentum of both crates will be the same right before they hit the ground.

The normal force will be the same on both crates when they hit the ground.

Both of the crates are accelerating at the same rate.

Both of the crates are falling at a constant speed.

Answers

The statement that is supported by the data is that both of the crates are accelerating at the same rate. That is option C.

What is acceleration?

Acceleration is defined as the quantity that measures the rate of change of velocity of a moving object.

According to Newton's second law, the force (F) acting on an object is equal to the mass (m) of object times its acceleration (a).

That is F = ma

For the first crate = a = 686/70 = 9.8 m/s²

Fro the second crate = 490/50 = 9.8 m/s²

Therefore, Both of the crates are accelerating at the same rate.

Learn more about mass here:

https://brainly.com/question/28409714

#SPJ1

A lamp in child's Halloween costume flashes based on an RC discharge of a capacitor through its resistance. The effective duration of the flash is 0.250 s, during which it produces an average 0.500 W from an average 3.00 V. A) What energy does it dissipate? B) How much charge moves through the lamp? C) Find capacitance. D) What is the resistance of the lamp?

Answers

A) the energy dissipated is 0.125 Joules. B) the charge that moves through the lamp is 0.0278 Coulombs. C) the capacitance is 0.0278 Farads. D) the resistance of the lamp is approximately 8.99 Ohms.

A) To find the energy dissipated, use the formula:
Energy = Power × Time
where Power = 0.500 W and Time = 0.250 s.
Energy = 0.500 W × 0.250 s = 0.125 J
So, the energy dissipated is 0.125 Joules.
B) To find the charge that moves through the lamp, use the formula:
Energy = (1/2) × Charge × Voltage^2
Rearrange the formula to solve for Charge:
Charge = (2 × Energy) / Voltage^2
Charge = (2 × 0.125 J) / (3.00 V)^2 = 0.0278 C
So, the charge that moves through the lamp is 0.0278 Coulombs.
C) To find the capacitance, use the formula:
Energy = (1/2) × Capacitance × Voltage^2
Rearrange the formula to solve for Capacitance:
Capacitance = (2 × Energy) / Voltage^2
Capacitance = (2 × 0.125 J) / (3.00 V)^2 = 0.0278 F
So, the capacitance is 0.0278 Farads.
D) To find the resistance of the lamp, use the RC time constant formula:
Time constant (τ) = Resistance × Capacitance
Since the effective duration of the flash is 0.250 s, we can assume it is approximately equal to the time constant (τ).
Rearrange the formula to solve for Resistance:
Resistance = Time constant / Capacitance
Resistance = 0.250 s / 0.0278 F = 8.99 Ω
So, the resistance of the lamp is approximately 8.99 Ohms.

For more such questions on energy dissipated

brainly.com/question/15083660

#SPJ11

A load of 100g placed on a spiral spring, A extends it spring by 2cm when the same load is placed on spiral spring, B it extends it by 5cm, which spring has smaller stiffness

Answers

Spring A has smaller stiffness.Stiffness is a measure of the spring's resistance to deformation. The stiffer the spring, the more resistant it is to deformation. When a load is applied to a spring, it experiences deformation. Stiffness is a measure of how much force is required to deform the spring by a certain amount.

Springs with higher stiffness require more force to deform them than springs with lower stiffness.A load of 100g placed on a spiral spring, A extends its spring by 2cm, whereas the same load placed on spiral spring, B extends it by 5cm. The stiffness of a spring is inversely proportional to the amount of deformation it experiences. Spring B will be less stiff because it experiences more deformation than Spring A.Spring stiffness is measured in units of force per unit of length. The spring constant k is a measure of stiffness. It is defined as the amount of force required to extend the spring by one unit of length.The spring constant k can be calculated as follows:F = kxWhere F is the force applied, k is the spring constant, and x is the amount of deformation experienced by the spring. We can use this formula to calculate the spring constants for A and B:kA = F/x = 100g/(2/100) = 5000 N/mkB = F/x = 100g/(5/100) = 2000 N/mSpring A has a higher stiffness (5000 N/m) than spring B (2000 N/m) because it requires more force to deform it by the same amount. Hence, spring A has smaller stiffness.

For such more questions on stiffness:

brainly.com/question/30724864

#SPJ11

how does radio waves change with respect to their position to the event horizon

Answers

Radio waves, like all forms of electromagnetic radiation, are affected by the gravitational field of massive objects such as black holes, which have an event horizon beyond which nothing, not even light, can escape.

What is radio waves?

Radio waves are a type of electromagnetic radiation with a wavelength longer than infrared light and shorter than microwaves. Radio waves are used for communication and information transfer, and are commonly used in radio and television broadcasting, cellular communication, and satellite communication.

As radio waves approach a black hole, they are subject to gravitational redshift, a phenomenon whereby the wavelength of the wave is stretched out and its frequency decreases as it moves away from the black hole's gravitational field.

This means that the closer the radio waves get to the event horizon, the more they are redshifted, and the longer their wavelengths become.

Learn about Radio waves here https://brainly.com/question/29544736

#SPJ1

Patients with anterograde amnesia were taught to solve the Tower of Hanoi problem. It was later found that they _________.a. remembered solving the problem and could do so againb. didn't remember the problem and couldn't solve itc. remembered solving the problem but couldn't do it againd. didn't remember solving the problem but could do it again

Answers

Patients with anterograde amnesia were taught to solve the Tower of Hanoi problem. It was later found that they "didn't remember solving the problem but could do it again" which is option d.

Anterograde amnesia is a type of amnesia that affects the ability to generate new memories following the onset of the condition. This condition is generally caused by damage to the hippocampus or adjacent structures, and it typically affects a person's ability to learn and remember new information.

Therefore, patients with anterograde amnesia are unable to form new memories and often rely on implicit memory systems to perform specific tasks over time.

Thus the correct answer is option d.

To know more about amnesia  click on below link :

https://brainly.com/question/29521083

#SPJ11

a system releases 690 kj of heat and does 110 kj of work on the surroundings. part a what is the change in internal energy of the system?

Answers

A  system releases 690 kj of heat and does 110 kj of work on the surroundings then part a what i the change in internal energy of the system  -800 kJ.


The change in internal energy of the system can be calculated using the formula

ΔU = Q - W,

where ΔU is the change in internal energy, Q is the heat exchanged, and W is the work done.

In this case, the system releases 690 kJ of heat (Q = -690 kJ) and does 110 kJ of work on the surroundings (W = 110 kJ).

So, ΔU = -690 kJ - 110 kJ = -800 kJ.

The change in internal energy of the system is -800 kJ.

Know more about   internal energy   here:

https://brainly.com/question/30207866

#SPJ11

Question about my assignment

Answers

Answer: A - Gold Foil Experiment

Explanation:

Answer:

A

Explanation: Rutherford's gold foil experiment.

the photo at right was taken through a specroscope. what color was the pigment extract used to produce this spectrum? what colo(s) did this extract absorb?

Answers

Light is a form of energy. All the properties of light can be explained by Considering the Wave length and lespuscutar theory.

The Wave Theory states that waves are how light moves across space. When Visible light  is passed through a prim it is split up into seven colours which corresponds to definite wave length. a phenomenon Called dispersion. The study of interaction between matter and electromagnetic radiation  is defined as spectroscopy.

A spectrophotometer is a device which detect the percentage transmittance of light radiation. When light of certain intensity and frequency range is passed through the Sample Thus the instrument Compare the intensity of the transmitted light with that of the incident light.

A spectroscope is a device that divides light into its individual wavelengths to produce a spectrum.

Learn more about Light here:

https://brainly.com/question/7439081

#SPJ1

ay telescope mirrors are arranged in a way very similar to optical telescope mirrors. group of answer choices true false

Answers

Telescope mirrors are arranged in a way very similar to optical telescope mirrors is a True statement.

The Telescopes and optical telescope can also be used as

Telescopes: Telescopes, including optical telescopes, use mirrors or lenses to collect and focus light. Optical telescope: Optical telescope mirrors are usually curved in shape to reflect light from distant objects and form an image at the focal point.

Similarly, other types of telescopes such as radio telescopes, infrared telescopes, and ultraviolet telescopes also use mirrors to collect and focus the corresponding wavelengths of light they are designed to detect.

To learn more about the 'optical telescope':

https://brainly.com/question/18300677

#SPJ11

the electrostatic engines obtaining the highest degree of conversion of electric power into thrust and having the longest operational lifetime, are also called:

Answers

The electrostatic engines obtaining the highest degree of conversion of electric power into thrust and having the longest operational lifetime are also called electrospray thrusters.

Electrospray thrusters are a type of ion thruster that uses electrostatic forces to generate thrust, making them highly efficient and fuel-saving propulsion systems.
Electrospray thrusters use an electrical charge to atomize a propellant and accelerate it in a way that produces thrust. The electrical charge is created by an electrical field that ionizes the propellant and accelerates it out of the engine, resulting in high specific impulse and a long operational lifetime. The propellant is typically a liquid such as xenon, krypton, or argon.

As the propellant is atomized and accelerated, the electrostatic force pushes the ions away from the engine, creating thrust. This type of thruster is typically used in low-power and medium-power applications, such as CubeSats, nanosatellites, and interplanetary missions.

for such more question on electrostatic

https://brainly.com/question/17692887

#SPJ11

two guys who weight the same are holding onto a massless pole while standing on horizontal frictionless ice. 1)if the guy on the left starts to pull on the pole, where do they meet?

Answers

If the guy on the left starts to pull on the pole, they will meet in the middle since the pole is massless and the surface is frictionless.

If the two guys are holding onto a massless pole and standing on horizontal frictionless ice, then there is no net external force acting on the system, and the center of mass of the system will remain stationary. When the guy on the left starts to pull on the pole, he exerts a force on the pole to the left. According to Newton's third law, the pole exerts an equal and opposite force on the guy to the right, causing him to move to the right.

The position where they will meet depends on the magnitudes of the forces that the guy on the left exerts on the pole and the distance between the two guys. If we assume that the guys initially hold the pole at its center of mass, then we can use the principle of conservation of momentum to determine where they will meet.

Since the center of mass remains stationary, the initial momentum of the system is zero. After the guy on the left starts pulling, the system gains a net momentum to the left equal to the force that he exerts on the pole multiplied by the time that he pulls. In order to conserve momentum, the guy on the right must move an equal distance to the right.

Learn more about friction:

https://brainly.com/question/24338873

#SPJ11

while a car travels around a circular track at a constant speed, its a) acceleration is non-zero and along the path b) acceleration is non zero and inward toward the center c) acceleration is zero d) acceleration is non-zero and outward from the center

Answers

While a car travels around a circular track at a constant speed, its (d) acceleration is non-zero and outward from the center.

When a car travels around a circular track at a constant speed, it is constantly changing direction, and therefore, constantly accelerating. This acceleration is known as centripetal acceleration and is directed towards the center of the circle.

However, according to Newton's third law, every action has an equal and opposite reaction. In this case, the car also experiences an equal and opposite acceleration, known as the centrifugal acceleration, which is directed outward from the center of the circle.

This is the non-zero acceleration experienced by the car, and it acts to counterbalance the centripetal acceleration, keeping the car moving in a circular path.

Therefore, the correct answer is (d) acceleration is non-zero and outward from the center.

For more questions like Acceleration click the link below:

https://brainly.com/question/12550364

#SPJ11

kim holds a 2.0 kg air rifle loosely and fires a bullet of mass 1.0 g. the muzzle velocity of the bullet is 150 m/s. calculate the recoil speed of the rifle.

Answers

The recoil speed of the rifle is 0.075 m/s in the opposite direction to the direction of the bullet.

To calculate the recoil speed of the rifle, we can use the conservation of momentum principle. According to this principle, the total momentum of the system (bullet + rifle) is conserved before and after the firing of the bullet.

Initially, the total momentum of the system is zero because the rifle and bullet are at rest. After firing the bullet, the total momentum of the system is given by:

m1v1 + m2v2 = 0

where m1 and v1 are the mass and velocity of the bullet, and m2 and v2 are the mass and recoil velocity of the rifle, respectively.

Substituting the given values, we get:

(0.001 kg)(150 m/s) + (2.0 kg)(v2) = 0

Solving for v2, we get:

v2 = -(0.001 kg)(150 m/s) / (2.0 kg)

v2 = -0.075 m/s

Learn more about recoil speed of the rifle at: https://brainly.com/question/12794487

#SPJ11

william herschel tried to locate the center of our galaxy by counting the number of stars in different directions. this did not work because

Answers

William Herschel's approach failed due to the fact that some parts of the Milky Way galaxy are denser than others.

This means that the number of stars would be greater in these regions, making it difficult to determine the galaxy's center simply by counting the number of stars in different directions. Herschel's pioneering work, including his discovery of Uranus and his cataloging of hundreds of nebulae, helped pave the way for future astronomers to explore and understand the universe. However, his method for locating the center of the Milky Way was limited by the technology of his time.

In modern times, astronomers have employed a range of techniques to study the galaxy, including measuring the positions and motions of stars, observing the behavior of gas and dust clouds, and using radio and other wavelengths of light to observe the galaxy's structure and composition.

Despite these advances, the center of the Milky Way remains difficult to observe directly due to the presence of dense dust and gas clouds, which block visible light. Nonetheless, astronomers have been able to estimate the location and size of the galaxy's central region through careful analysis of the behavior of stars and other objects orbiting around its center.

To know more about the Milky Way galaxy, refer here:

https://brainly.com/question/2905713#

#SPJ4

on an asteroid that is twice as far as earth is from the sun, the strength of sunlight would be group of answer choices twice as great as on earth half as great as on earth a quarter as great as on earth the same as on earth

Answers

On an asteroid that is twice as far as Earth is from the sun, the strength of sunlight would be c. a quarter as great as on Earth.

Sunlight or solar radiation is the main source of energy that drives climate and weather patterns on Earth. The amount of solar radiation reaching Earth varies depending on the distance of the Earth from the Sun.

An asteroid is a small rocky body orbiting the sun. It is too small to be called a planet, and is instead classified as a minor planet, which is a term used for any astronomical object that is neither a planet nor a comet. They are primarily composed of materials that formed the solar nebula, a disk-shaped cloud of gas and dust left over after the formation of the solar system.Therefore, the strength of sunlight on an asteroid that is twice as far as Earth is from the sun would be a quarter as great as on Earth.

Learn more about solar system at:

https://brainly.com/question/9367001

#SPJ11

Other Questions
an important assumption is that all of the fe2 reacted with phen and ended up in the ferroin product. was this a reasonable assumption? Refer to the accompanying figure. If the government imposed a price ceiling of $40, what would happen in this market? Multiple Choice There would be excess supply. The price ceiling would have no effect A fluorinated organic gas in a cylinder is com- pressed from an initial volume of 910 mL at 156 Pa to 490 mL at the same temperature. What is the final pressure?Answer in units of Pa. a population of the northern fur seal in st. paul is being shown in the graph here. what type of growth is this representing? Which of the following describes amnesia? students who study for 7 hours over the course of a week (spaced learning) will perform better than students who cram for 7 hours the night before the exam. the independent variable in this hypothesis is: the direction of induced ? flow through a conductor is determined by the direction of the magnetic field surrounding the conductor and the direction the conductor is traveling through the magnetic field. answer 1 whenever a conductor cuts through magnetic lines of flux, a ? is induced into the conductor. answer 2 whenever current flows through a conductor, a ? is created around the conductor a clothing store may want to begin offering clients a store charge account in order to increase data mining resources and customer retention. group of answer choices true false which approach would the nurse use to help a client with bipolar disorder who is aggressive and disruptive in group and social settings develop social skills? How is an ionic compound similar to the doubles partners in this activity? Find the percentage composition of each compound listedbelow. In the first ten problems, the correct formula is given.In the next four problems, laboratory data for the compoundare presented.1. FeO2. MgCl3. CH44. CS5. NO6. HgO7. SnI8. Cu09. NH10.CHO the nurse is aware that the nurse should contact the lab for them to collect the blood: a. 15 minutes after the infusion b. 30 minutes before the infusion c. 1 hour after the infusion d. 2 hours after the infusion calculate the volume in liters of a 0.020mm barium chlorate solution that contains 375.mmol of barium chlorate . be sure your answer has the correct number of significant digits. Classify the following according to whether they represent plant growth or plant development.a. Flower bud maturationb. Growth Development c. Shoot meristems begin forming flowers d. Cells begin producing chloropla The purpose of a SWOT analysis is to ______. which describes unwelcome behavior that is severe, pervasive, or persistent enough to create a hostile or intimidating work environment? janet is taking the wais and is completing the section in which she is tested on vocabulary, similarities between words, and reading comprehension. which area of the test is she currently working on? The perimeter of a rectangular parking lot is 364 m. If the length of the parking lot is 98 m, what is its width? Which crime is NOT one that Dogberry accuses Borachio and Conrade of?Select one:a. Slanderingb. Adulteryc. False Reportd. Lying true/false in the inner solar system the largest surface fratures such as volacanos or valleys are found on the largest planets