On the first day of winter in the northern hemisphere, if you are at 66 degrees north, you will experience cold temperatures, short daylight hours, and potentially snowfall. The sun will set earlier and the temperatures will drop, often below 0 degrees Celsius (32 degrees Fahrenheit).
This region is well within the Arctic Circle, so you can expect the winter to be cold and dark. During the day, temperatures may not reach above freezing, and in the evening they will drop even further. Snowfall is common and the region will be quite dark, as the sun is much lower in the sky at this time of year. During the winter solstice, the sun may only be visible for a few hours each day in this area.
Temperature in the poles around northern hemisphere is too low for any human settlement, lack of direct sunlight is one of the major reason for this extremely low temperature and harsh climate.
Know more about northern hemisphere here:
https://brainly.com/question/13661560
#SPJ11
what composition of lava will travel further group of answer choices basaltic rhyolitic andesitic dacitic
Basaltic lava is the most fluid type of lava and can therefore travel further than other types of lava. This is because basaltic lava is composed of lower viscosity magma that is able to flow over greater distances due to its lower density.
This type of lava is also the most common type of lava, which means it is the most likely to be found on Earth’s surface. Rhyolitic lava is more viscous than basaltic lava and therefore does not travel as far.
This is because rhyolitic lava is composed of higher silica and has a higher viscosity than basaltic lava. Andesitic lava is less viscous than rhyolitic lava, but more viscous than basaltic lava.
Andesitic lava is composed of minerals that create a mix of both low and high viscosity magma. Finally, dacitic lava is the least fluid type of lava and therefore has the shortest travel distance. This is because the minerals in dacitic lava create a high viscosity magma that is not able to flow as far as other types of lava.
In summary, basaltic lava is the most fluid type of lava and is therefore able to travel further than other types
Know more about Basaltic lava here
https://brainly.com/question/10109049#
#SPJ11
Which is the best example of the geographical term "site"?
which type of cloud shows the greatest vertical growthwhich cloud type would be most likely to form in an unstable atmosphere?
The type of cloud that shows the greatest vertical growth and is most likely to form in an unstable atmosphere is a cumulonimbus cloud.
The cumulonimbus cloud is known for producing strong winds, thunder, lightning, and heavy rain or snow.
These clouds are tall and dense and can grow to heights of over 10,000 meters (32,808 feet). They are composed of water droplets and sometimes contain ice crystals, which form due to the rapid condensation and uplifting of air.
An unstable atmosphere is characterized by warm, moist air near the surface and cooler air at higher altitudes, creating conditions that promote upward air currents and vertical development of clouds.
To know about cumulonimbus cloud refer here:
https://brainly.com/question/23668425#
#SPJ11
________ are comprised of members from different geographic areas assembled as needed to collaborate on a certain project.a) work groupsb) virtual teamsc) non-core teamsd) task forcese) command groups
Task Forces are comprised of members from different geographic areas assembled as needed to collaborate on a certain project. The answer is (d) task forces.
Task forces are temporary teams that are created to work on a specific project or problem. They are composed of individuals who have different skill sets and come from different geographic areas within an organization. Task forces can be established for a variety of purposes such as developing a new product, improving a process, or resolving a crisis. Once the task is completed, the team is dissolved.
The members of the task force return to their previous roles within the organization. Task forces are often used in organizations to leverage expertise from various parts of the organization and to ensure that critical issues are addressed in a timely and effective manner. They are a useful way to bring together diverse perspectives and talents to achieve a specific objective.
Therefore, the correct answer is (d) task forces.
To know more about geographic areas, refer here:
https://brainly.com/question/7202534#
#SPJ11
__________ occurs when water passes over a waterfall; the force of which creates swirling and eroding at the bottom, which cuts away at its base.
Hydraulic action occurs when water passes over a waterfall; the force of which creates swirling and eroding at the bottom, which cuts away at its base.
What is hydraulic action?Hydraulic action is the erosion of the soil or rocks by the abrasive action of moving water. It refers to the pressure exerted by water on the bed or banks of the river, caused by its velocity. The hydraulic action is the erosion of the banks or bed of a river, resulting from the force of moving water or waves. Water pressure is so great in hydraulic action that it dislodges rock or soil particles and transports them downstream. The swirling action at the base of a waterfall, created by the force of water, is a good example of hydraulic action. Therefore, the correct answer is hydraulic action.
Learn more about Hydraulic action here: https://brainly.com/question/7717216
#SPJ11
which element is found in greater amounts in low viscosity magma, than in high viscosity magma? question 12 options: a) si b) fe
Si (Silica) is found in greater amounts in low viscosity magma, than in high viscosity magma. Option A is correct answer.
High silica content magmas will consequently show higher levels of polymerization and have higher viscosities than magmas with low silica concentration. A substance's viscosity is a measurement of its consistency. A substance's viscosity is defined as its capacity to resist flow. Viscosity is, in some ways, the inverse of fluidity. Because cold molasses is less fluid than water, it has a greater viscosity.
The temperature, composition, and gas concentration of a magma all influence its viscosity. The relationship between temperature and viscosity is self-evident. The greater the temperature, like with most liquids, the more fluid the material becomes, reducing its viscosity.
Learn more about Magma here:
https://brainly.com/question/23661578
#SPJ4
escoge la respuesta correcta. how is the sky reflected at the salar de uyuni? the sun causes it to reflect all year long. a thin layer of water reflects it during the rainy season. the snow reflects it during the winter season. the salt reflects it all year long.
The sky is reflected at the Salar de Uyuni in various ways throughout the year. During the rainy season, a thin layer of water reflects the sky, creating a unique and beautiful landscape. In the winter, the snow reflects the sky, further adding to the breathtaking scenery. However, all year long the salt of the Salar reflects the sky, making it shimmer and sparkle in the sun's rays.
This reflection of the sky can be seen from afar and provides a mesmerizing effect as the sun's rays travel across the expanse of the Salar. In the mornings, the sky may be filled with wisps of clouds which are then mirrored in the reflective salt, giving the impression that one is standing on the edge of a large sea. During the evenings, the sky often holds a stunning array of colours, which are similarly reflected in the salt and create an amazing landscape.
The sky is constantly reflecting off the Salar de Uyuni and changing with the changing of the seasons. Whether it is the thin layer of water in the rainy season, the snow in the winter season, or the salt all year long, the reflections of the sky always create a breathtaking landscape that is sure to awe anyone who views it.
To learn more about rainy season here:
https://brainly.com/question/28044728#
#SPJ11
in general, what do beaches look like at the end of winter?
Winter – Higher winter waves move sand offshore and narrow the beach. … The summer beach is covered with a layer of sand that is moved south by the longshore currents and onshore by low waves. The winter beach is denuded of sand by high storm waves.
In general, beaches look different at the end of winter compared to the peak of summer. During winter, beaches are often deserted and quiet, with fewer visitors and tourists.
The weather is usually cooler, and the water is colder, making swimming and water sports less popular. Additionally, beaches may be covered in debris, seaweed, and other natural materials that have washed up during storms or high tides. The sand may also be covered in snow, depending on the region.
However, despite the cooler weather and fewer visitors, winter beaches can be a beautiful and peaceful place to visit. Many people enjoy long walks along the shoreline, watching the waves crash against the shore, and taking in the natural beauty of the coast.
In conclusion, beaches look different at the end of winter compared to the peak of summer. They are often quieter, colder, and covered in natural materials. Despite this, they can be a beautiful and peaceful place to visit during the off-season.
For more about beaches look:
https://brainly.com/question/14900449
#SPJ11
Which point is most important for the cartographer to consider before
creating a new map?
O A. Where the equator is located
OB. Goal of the map
O C. How the map will be displayed
OD. Relative size of the map elements
what is weathering?????
Answer:
weathering is the process that breaks down rock on earth's surface
which of the following is a result of seafloor spreading?
a. Trenches form at transform boundaries.
b. Mid ocean ridges form at convergent boundaries.
c. Mid ocean ridges form at divergent plate boundaries
d. Trenches form at divergent boundaries.
the pacific coast of south america has many volcanic mountains and a narrow continental shelf. this is an example of .
The Pacific Coast of South America has many volcanic mountains and a narrow continental shelf, which is an example of a subduction zone. Subduction zones are a type of tectonic boundary where one tectonic plate is sliding underneath another.
It also leads to the formation of a narrow continental shelf due to the subduction of the plate. The oceanic plate is pushed down and causes the edge of the continent to drop, resulting in a shallow seafloor.
Subduction zones are an example of a convergent plate boundary, where two plates are moving towards each other. Subduction zones form a major part of the global tectonic cycle, helping to drive continental drift and mountain formation.
Know more about volcanic mountains here:
https://brainly.com/question/11954011
#SPJ11
In the summer, snowfall decreases, and melting increases, which results in the outflow being meltwater, thus leading to an increase in ablation causing an overall __________ budget and glacier shrinkage.
In the summer, snowfall decreases, and melting increases, which results in the outflow being meltwater, thus leading to an increase in ablation causing an overall negative budget and glacier shrinkage.
What is Ablation?Ablation refers to the processes by which a glacier loses ice. The process of ablation is due to both melting and calving. In the context of the given question, the decrease in snowfall and increase in melting result in an increase in ablation, which causes an overall negative budget and glacier shrinkage.
Ablation can be performed for a variety of reasons, including to treat cancer, reduce the size of an organ, or relieve symptoms caused by certain conditions. For example, cardiac ablation is a common procedure used to treat abnormal heart rhythms by destroying small areas of heart tissue that are causing the irregular heartbeat.
Learn more about Ablation here: https://brainly.com/question/29736065
#SPJ11
what kind of climate is controlled by elevation more than any other factor? responses temperate continental temperate continental tropical wet tropical wet highland highland polar
The climate that is controlled by elevation more than any other factor is the highland climate.
What is the highland climate?
A highland climate is a climate that is found in high mountainous areas such as the Andes, the Himalayas, and the Rockies. Due to high altitudes, these regions experience cooler temperatures compared to surrounding lowlands, making it difficult for life to thrive.
The temperature, precipitation, and vegetation of highland areas vary depending on factors such as the altitude and slope orientation. Generally, temperatures decrease with altitude, and rainfall increases.
Highland climates usually experience heavy rainfall and fog, especially in the upper elevations. Due to the cold temperatures, vegetation is limited to alpine tundra and montane forests.
countries with highland climates include China, Mongolia, The United States, Nepal, Kazakhstan, Tajikistan, Kyrgyzstan, Tibet, Uganda, Kenya, Russia, Georgia, Italy, and Switzerland, among others.
To know more about Highland climates, refer here:
https://brainly.com/question/7665343
#SPJ11
explain how igneous rocks are classified, summarizing the main differences between felsic, intermediate, mafic, and ultramafic rocks.
Igneous rocks are classified based on their texture, mineralogy, and composition.
Let us discuss each classification of igneous rocks.
Felsic rocks: Felsic rocks are light-colored, have a low density, and are rich in silica ([tex]SiO_2[/tex]). They are composed mostly of feldspar minerals and quartz. These rocks are found in areas with high tectonic activity. Examples include granite and rhyolite.Intermediate rocks: Intermediate rocks are a combination of mafic and felsic rocks. They contain a high percentage of plagioclase feldspar and are intermediate in density. Examples include andesite and dacite.Mafic rocks: Mafic rocks are dark-colored, have a high density, and are rich in magnesium and iron. They are composed mostly of pyroxene and plagioclase feldspar. Examples include basalt and gabbro.Ultramafic rocks: Ultramafic rocks are composed of the least amount of silica and the highest amount of iron and magnesium. They are found deep within the earth and are mostly composed of olivine and pyroxene minerals. Examples include peridotite and dunite.To summarize, the primary distinctions between felsic, intermediate, mafic, and ultramafic rocks are their silica content, mineral composition, color, density, and origin. Felsic rocks have the highest silica content, intermediate rocks have moderate silica content, mafic rocks have low silica content, and ultramafic rocks have the lowest silica content. The various types of igneous rocks exhibit unique physical properties and are linked to specific geological environments and processes.
To know more about the " igneous rocks": https://brainly.com/question/20538428
#SPJ11
when someone on earth observes the moon in the first-quarter phase, someone on the moon facing earth observes earth in the question 15 options: new earth phase. third-quarter earth phase. crescent earth phase. full earth phase. first-quarter earth phase.
When someone on earth observes the moon in the first-quarter phase, someone on the moon facing earth observes earth in the first-quarter earth phase.
When the full illuminated face of the Moon visible on Earth, it is on the Full Moon phase.New moon is the illuminated side of the Moon is away from the Earth. only the shadowed side can be seen. Waning gibbous - the Moon is less than fully illuminated, but, is more than half.
Waxing crescent first sliver of the Moon that we can see. The moon is a natural satellite of Earth. Earth has only one satellite, called moon. Other planets have more satellites.The 1 is No moon phase, and the 2 is crescent moon, the 3 is half moon phase and the 4 is full moon phase.
Learn more about moon
https://brainly.com/question/15637023
#SPJ4
Equation for a circle that has a center of -6, 5 and passes through the point -11, 3
(x + 6)² + (y - 5)² = r²(-11 + 6)² + (3 - 5)² = r² (-5)² + (-2)² = r² 25 + 4 = r² 29 = r²
Answer: (x + 6)² + (y - 5)² = 29
evidence that supports a coastal migration to the americas comes from which source? (select as many as apply)
The source that provides DNA evidence supporting the idea of a coastal migration to the Americas is human fossils.
Studies of DNA extracted from ancient human remains have provided evidence for the coastal migration theory, which posits that the first humans to arrive in the Americas migrated along the Pacific coast of North and South America, rather than through an inland route.
Specifically, mitochondrial DNA studies of ancient human remains found in North and South America have shown genetic links between these populations and modern-day populations in Southeast Asia and the Pacific Islands, suggesting that the first Americans originated from these regions and migrated along the coastal route.
DNA evidence from plant and animal fossils can also provide information about past environments and migrations, but it is the analysis of ancient human DNA that has been most crucial in supporting the coastal migration theory.
The complete question is:
Which source provides DNA evidence supporting the idea of a coastal migration to the Americas? Is it plant fossils, human fossils, or animal fossils?
To know more about coastal migration, refer here:
https://brainly.com/question/2600497#
#SPJ11
while excavating you find a series of buttons made of shell. good eye! what chronometric dating method would you use to discover their age?
When excavating and finding a series of buttons made of shell, the chronometric dating method that would be used to discover their age is Radiocarbon dating.
What is Radiocarbon dating?Radiocarbon dating is an archeological technique that determines the age of carbon-bearing materials up to 60,000 years old. It is used to date organic materials such as wood, charcoal, and bone, as well as inorganic materials like shell and limestone.
Radiocarbon dating, also known as carbon-14 dating, is a method used to determine the age of organic material by measuring the amount of carbon-14 present. It is based on the fact that carbon-14 (14C) is constantly being created in the atmosphere by the interaction of cosmic rays with atmospheric nitrogen.
The carbon-14 in the atmosphere combines with oxygen to form carbon dioxide, which is then incorporated into plants through photosynthesis. Animals then eat the plants and consume the carbon-14, and this is how it enters the food chain. When an organism dies, it stops taking in carbon-14, and the carbon-14 that was in the organism begins to decay.
This decay is measured by comparing the amount of carbon-14 to the amount of carbon-12 (12C) in the sample. By comparing the ratio of carbon-14 to carbon-12 in a sample with that of a living organism, it is possible to determine the age of the sample.
Based on the aforementioned explanation, the chronometric dating method that would be used to discover the age of the shell buttons found while excavating is Radiocarbon dating.
To know more about Radiocarbon dating, click on the link below:
https://brainly.com/question/12693872#
#SPJ11
true/faslse with the expection of venus, plntery surface tempertures decrease ar greater disnatces from the sun
True, with the exception of Venus, planetary surface temperatures decrease at greater distances from the sun. This is due to the fact that the sun is the main source of heat for the planets in the solar system, and the amount of heat that reaches each planet is determined by its distance from the sun.
Venus is an exception to this trend. Although it is closer to the sun than Earth, its surface temperature is much higher due to a greenhouse effect caused by its thick atmosphere, which traps heat close to the planet's surface.
In summary, while the general trend is for planetary surface temperatures to decrease with distance from the sun, there can be exceptions such as Venus, where other factors such as atmospheric composition can have a significant impact on temperature.
To know more about planets, refer here:
https://brainly.com/question/13083839#
#SPJ11
in hopes of identifying an ancient caldera, what are three specific features that you might look for?
The three features to look for when identifying an ancient caldera are a central uplift, a basin-shaped depression, and a breached or modified rim.
To identify an ancient caldera, three specific features to look for are central uplift, a basin-shaped depression, and a breached or modified rim. Central uplift is the initial formation of a caldera due to the collapse of the magma chamber. This feature is the most visible indicator of a caldera and can be characterized by a central peak or cone-shaped elevation.
The basin-shaped depression of a caldera is caused by subsidence of the ground due to the magma chamber being emptied. This is the defining characteristic of a caldera and can often be seen as a large and circular depression.
Finally, a breached or modified rim can be indicative of an ancient caldera. The breach of the rim is usually caused by the erosional forces of streams and rivers, which can erode the caldera rim and create a terrace along its walls. Additionally, a modified rim can indicate the presence of an ancient caldera, as this can be created by further erosion, faulting, and landslides.
To learn more about caldera here:
https://brainly.com/question/28872553#
#SPJ11
explain a parallel, meridian, latitude, and longitude, indicating where the zero value is for each measurement and identifying important lines of latitude.
Answer: You've seen lines running across maps your whole life and may not have noticed them. The lines running North to South are called "Meridians" or "lines of longitude" (Figure 2), while the lines running East to West are called "Parallels" or "lines of latitude" (Figure 3).
Explanation:
PLS HELP MEE the question is in the photo
Answer:
Explanation:
sorry i don't know it sorry
Which energy source would provide affordable, abundant, easy to produce electricity for a factory? a. solar panels b. wind turbines c. gas generators d. a hydroelectric plant
Answer: c. gas generators
Explanation: Generators are typically used as backup energy sources with power outages in both commercial and home settings. They are the best option for various reasons:
Affordability: Gas generators tend to be relatively affordable compared to solar panels (option a) and wind turbines (option b). The initial investment and maintenance costs of gas generators are typically lower, making them a cost-effective option for generating electricity in a factory setting.
Abundance: Natural gas, which is used as a fuel for gas generators, is a widely available energy source. It is often extracted as a byproduct of oil drilling or produced through other methods. The abundance of natural gas ensures a reliable supply for generating electricity in the long term.
Ease of production: Gas generators are relatively easy to produce and set up compared to solar panels and wind turbines, which require specific manufacturing processes and installation procedures. Gas generators can be readily purchased or manufactured and can be quickly set up to start generating electricity for a factory.
Learn more about electricity here: https://brainly.com/question/12791045?.
the event that triggered the change in pluto's status from planet to dwarf planet was the discovery that
the earthquake foci pattern east of australia and just north of new zealand indicates which tectonic setting?
The earthquake foci pattern east of Australia and just north of New Zealand indicate the convergent tectonic setting.
What is a convergent tectonic setting?
Convergent tectonic setting occurs when two tectonic plates move towards each other and eventually collide. The area of contact between the two plates is known as a subduction zone. Earthquakes occur frequently in this region because of the pressure generated by the colliding plates.
The collision of the Pacific plate with the Australian plate produces a tectonic activity in the region east of Australia and just north of New Zealand.
This activity leads to the subduction of the Pacific plate beneath the Australian plate, which causes an earthquake in the area.
Consequently, the earthquake foci pattern east of Australia and just north of New Zealand indicates the convergent tectonic setting.
To know more about convergent tectonic setting, refer here:
https://brainly.com/question/13209907
#SPJ11
Explain one spacial change in manufacturing employment patterns as a result of deindustrialization
Answer:
During deindustrialization, the declining share of employment in manufacturing appears to mirror a decline in the share of manufacturing value added in GDP. At first glance, this decline would suggest that domestic expenditure on manufactures has decreased while expenditure on services has increased.
Contemporary manufacturing is characterized by:production facilities that are generally located as close as possible to the sites of raw material productionstrong unions and localized involvement in all aspects of the production processspatial disaggregation of the production process to exploit the cheapest labor costs possiblereliance on highly skilled labor at all phases of the production processproduction facilities located close to railroads and other break-of-bulk points
Contemporary manufacturing is characterized by the use of advanced technology, automation, and globalized supply chains to take advantage of cheaper labor costs and access to raw materials worldwide. Spatial disaggregation of the production process to exploit the cheapest labor costs possible is a defining characteristic of contemporary manufacturing. The answer is option C.
Contemporary manufacturing has undergone significant changes over the years, and it is characterized by advanced technologies and automation that streamline production processes and reduce costs. The industry relies on globalized supply chains, which involve sourcing raw materials and components from different parts of the world to take advantage of cheaper labor costs and access to raw materials.
Overall, contemporary manufacturing is marked by advanced technology, automation, globalized supply chains, the use of highly skilled labor, and spatial disaggregation of the production process.
Hence, C is the correct option.
The complete question is:
What are the characteristics of contemporary manufacturing, and which of the following options describes it accurately?
A. Production facilities that are generally located as close as possible to the sites of raw material production.
B. Strong unions and localized involvement in all aspects of the production process.
C. Spatial disaggregation of the production process to exploit the cheapest labor costs possible.
D. Reliance on highly skilled labor at all phases of the production process.
E. Production facilities located close to railroads and other break-of-bulk points.
To know more about globalized supply chains, refer here:
https://brainly.com/question/30295278#
#SPJ11
what does the cenozoic fossil record of north america reveal about how climate was changing over that era?
The Cenozoic fossil record of North America reveals that the climate was changing significantly over the era. During the Paleocene and Eocene, temperatures were generally warmer than today and the climate was relatively wet. As the Eocene transitioned into the Oligocene, temperatures began to cool.
By the end of the Miocene, temperatures began to cool again, resulting in the formation of glaciers in the northern part of the continent. This period of cooling and drying continued through the Pliocene and Pleistocene.
By the end of the Pleistocene, temperatures were much cooler and the climate was dry, resulting in the onset of the modern glacial age. These fluctuations in climate over the Cenozoic era reveal the dynamic nature of Earth’s climate system.
Know more about Eocene here:
https://brainly.com/question/30144622
#SPJ11
which two types of ocean circulation changes have had exceptional influence on climate and biodiversity in the past?
The two types of ocean circulation changes that have had exceptional influence on climate and biodiversity in the past are El Niño-Southern Oscillation (ENSO) and Atlantic Meridional Overturning Circulation (AMOC).
El Niño-Southern Oscillation is a complex climate pattern that involves changes to ocean temperatures and atmospheric pressure in the tropical Pacific Ocean. It can lead to drastic changes in precipitation and temperature patterns in different parts of the world.
Atlantic Meridional Overturning Circulation is a large-scale system of ocean currents that transport heat from the tropics to high latitudes, and back again. This circulation is an important component of Earth’s climate system, influencing weather and climate patterns in the North Atlantic region and beyond.
Changes to the AMOC can have serious impacts on regional climate and biodiversity, particularly in Europe and North America. Both ENSO and AMOC have the potential to cause significant changes to the global climate system, with implications for biodiversity and human societies.
Know more about ocean circulation here
https://brainly.com/question/30356957#
#SPJ11