**If you have 5.0 moles of calcium, how many moles of calcium carbonate will be produced?

Answers

Answer 1

5.0 moles of calcium will produce 5.0 moles of calcium carbonate.

The equation for the reaction of calcium and carbon dioxide is:

Ca + CO2 → CaCO3

Therefore, for every 1 mole of calcium, 1 mole of calcium carbonate will be produced.

Given: 5.0 moles of calcium

Therefore, 5.0 moles of calcium carbonate will be produced.

The reaction of calcium and carbon dioxide produces calcium carbonate. For every 1 mole of calcium, 1 mole of calcium carbonate will be produced. In this case, 5.0 moles of calcium will result in the production of 5.0 moles of calcium carbonate.

This reaction is used in a variety of applications, such as the production of cement, lime, and mortar. Calcium carbonate is also used in the production of medicines and supplements, as well as in the food industry to increase calcium levels in foods. Calcium carbonate is also used in water treatment to remove heavy metals and other contaminants. In conclusion, 5.0 moles of calcium will produce 5.0 moles of calcium carbonate.

Learn more about calcium here:

https://brainly.com/question/26636816

#SPJ1


Related Questions

Which of the following occurs in an endothermic reaction but not in an exothermic reaction?
A. Chemical bonds are broken.
B. Atoms are rearranged.
C. Energy is absorbed.

Answers

Answer:

C. Energy is absorbed.

Explanation:

In an endothermic reaction, energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system. This means that the products of the reaction have a higher energy content than the reactants, and energy is stored in the chemical bonds of the products.

Therefore, option C, energy absorption, occurs in an endothermic reaction.

A mixture of 0.2000 mol of CO2, 0.1000 mol of H2 and 0.1600 mol of H2O is placed in a 2.000 L vessel. The following equilibrium is established: CO2(g) + H2(g) ⇌ CO(g) + H2O(g) At equilibrium [H2O] = 0.0856 M. a. Calculate the equilibrium concentrations of CO2, H2 and CO. b. Calculate Kc for the reaction

Answers

The equilibrium concentrations of CO₂, H₂, and CO are 0.170 M, 0.084 M, and 0.016 M, respectively.

The equilibrium amounts, what are they?

Making an equilibrium concentration calculation. A chemical reaction is said to be in a state of chemical equilibrium when both the reactants and the products are in a concentration that does not vary over time any longer.

The reaction's equilibrium constant formula is as follows:

Kc = ([CO][H₂O])/([CO₂][H₂])

We obtain the following by plugging in the equilibrium amounts from the ICE table:

Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x))

b. In order to determine Kc, we must first determine x using the equilibrium formula and the specified equilibrium H₂O concentration:

Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x)

Kc = (x(0.0856))/(0.02 - 0.3x + x - 0.01x)

Kc = (x(0.0856))/(0.02 - 0.21x)

Kc(0.02 - 0.21x) = 0.0856x

0.02Kc - 0.21Kcx = 0.0856x

0.21Kcx + 0.0856x = 0.02Kc

x(0.21Kc + 0.0856) = 0.02Kc

x = (0.02Kc)/(0.21Kc + 0.0856)

x = (0.02Kc)/(0.21Kc + 0.0856

After solving for the equilibrium concentrations of CO₂, H₂, and CO and substituting this equation for x back into the ICE table, we arrive at:

[CO₂] = 0.170 M

[H₂] = 0.084 M

[CO] = 0.016 M

To know more about equilibrium concentrations visit:-

https://brainly.com/question/13043707

#SPJ9

What is the mole ratio of C3H6O₂ to CO₂? Write it as a fraction.

Answers

The mole ratio of C3H6O₂ to CO₂ ia 1:y.

Mole ratio explained.

To determine the mole ratio of C3H6O2 to CO2, we need to look at the balanced chemical equation that relates these two substances in a chemical reaction. Let's assume the balanced chemical equation is:

C3H6O2 + xO2 → yCO2 + zH2O

where x, y, and z are coefficients that balance the equation. The mole ratio of C3H6O2 to CO2 is simply the ratio of the coefficients in front of each substance in the balanced equation. From the equation above, we can see that the coefficient in front of C3H6O2 is 1 and the coefficient in front of CO2 is y. Therefore, the mole ratio of C3H6O2 to CO2 is:

1 : y

where y is the coefficient in front of CO2 in the balanced equation.

Since we don't know the exact balanced chemical equation, we cannot determine the value of y and therefore cannot simplify the ratio any further. So the mole ratio of C3H6O2 to CO2 is 1 : y, where y is an unknown integer.

Learn more about mole ratio below.

https://brainly.com/question/30851942

#SPJ1

What makes up a community
in an ecosystem?

Answers

Answer:

Individuals make up a population; populations make up a species; multiple species and their interactions make up a community; and multiple species and their interactions make up ecosystems when you include the abiotic factors.

Answer:

a group of individuals or people make up a community as they live in a certain area

I NEED HELP ASAP! SHOW YOUR WORK! WILL MARK BRAINLIEST

Answers

a) 16.5 moles of H3PO4 would react with 1834.67 grams of Ca(OH)2. b) 5.06 x 1024 molecules of Ca(OH)₂ would produce 1.68 moles of H2O. c) 31.5 liters of Ca₃(PO₄)₂ are present if there are 4.2 moles of water produced.

Describe Moles?

A mole is a unit of measurement used in chemistry to express the amount of a substance. It is defined as the amount of a substance that contains the same number of particles (such as atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number and is approximately 6.022 x 10^23 particles per mole.

a) The balanced chemical equation for the reaction is:

2 H₃PO₄ + 3 Ca(OH)₂ → Ca₃(PO4)₂ + 6 H₂O

According to the equation, 2 moles of H₃PO₄ react with 3 moles of Ca(OH)₂ to produce 1 mole of Ca₃(PO4)₂ and 6 moles of H2O.

Therefore, the number of moles of Ca(OH)₂ required to react with 16.5 moles of H₃PO₄ can be calculated as:

(16.5 mol H₃PO₄) x (3 mol Ca(OH)₂ / 2 mol H₃PO₄) = 24.75 mol Ca(OH)₂

The molar mass of Ca(OH)₂ is 74.09 g/mol. Therefore, the mass of Ca(OH)₂ required can be calculated as:

24.75 mol x 74.09 g/mol = 1834.67 g

Therefore, 16.5 moles of H₃PO₄ would react with 1834.67 grams of Ca(OH)₂.

b) The balanced chemical equation shows that 3 moles of Ca(OH)₂ react to produce 6 moles of H₂O. This means that 1 mole of Ca(OH)₂ produces 2 moles of H₂O.

The number of moles of H₂O produced by 5.06 x 1024 molecules of Ca(OH)₂ can be calculated as:

5.06 x 1024 molecules Ca(OH)₂ x (1 mol Ca(OH)₂ / 6.022 x 1023 molecules) x (2 mol H2O / 1 mol Ca(OH)₂) = 1.68 mol H₂O

Therefore, 5.06 x 1024 molecules of Ca(OH)₂ would produce 1.68 moles of H2O.

c) From the balanced chemical equation, we know that 3 moles of Ca(OH)₂ react to produce 1 mole of Ca₃(PO4)₂ and 6 moles of H₂O. Therefore, the number of moles of Ca₃(PO4)₂ produced can be calculated as:

3 mol Ca(OH)₂ → 1 mol Ca₃(PO4)₂

If 6 moles of H₂O are produced, then the number of moles of Ca₃(PO₄)₂ can be calculated as:

6 mol H₂O x (1 mol Ca₃(PO₄)₂ / 3 mol Ca(OH)₂) = 2 mol Ca₃(PO₄)₂

Therefore, 4.2 moles of water would be produced from 4.2 / 6 x 2 = 1.4 moles of Ca(OH)₂. The volume of 1.4 moles of Ca₃(PO4)₂ can be calculated using the ideal gas law:

PV = nRT

Assuming standard temperature and pressure (STP), where T = 273 K and P = 1 atm, we can calculate the volume (V) of 1.4 moles of Ca₃(PO4)₂ as:

V = nRT/P = (1.4 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) = 31.5 L

Therefore, 31.5 liters of Ca₃(PO4)₂ are present if there are 4.2 moles of water produced.

To know more about volume visit:

https://brainly.com/question/22967790

#SPJ1

A) To determine how many grams of calcium hydroxide would react with 16.5 moles of phosphoric acid, we need to use the stoichiometry of the balanced chemical equation.

From the equation, we can see that 2 moles of H3PO4 react with 3 moles of Ca(OH)2. Therefore, 16.5 moles of H3PO4 will react with (16.5/2) x (3/1) = 24.75 moles of Ca(OH)2. The molar mass of Ca(OH)2 is 74.09 g/mol, so 24.75 moles of Ca(OH)2 is equal to 24.75 x 74.09 = 1835.98 grams of Ca(OH)2. Therefore, 16.5 moles of phosphoric acid would react with 1835.98 grams of calcium hydroxide.

B) The chemical equation shows that 3 moles of Ca(OH)2 react with 6 moles of H2O. Therefore, 1 mole of Ca(OH)2 will produce 2 moles of H2O. Avogadro's number tells us that there are 6.022 x 10²³ molecules in one mole of a substance.

Therefore, 5.06 x 10²⁴ molecules of Ca(OH)2 is equal to 5.06 x 10²⁴/6.022 x 10²³ = 8.4 moles of Ca(OH)2. Each mole of Ca(OH)2 will produce 2 moles of H2O, so 8.4 moles of Ca(OH)2 will produce 2 x 8.4 = 16.8 moles of H2O.

C) The balanced chemical equation shows that 3 moles of Ca(OH)2 react with 1 mole of Ca3(PO4)2. Therefore, 24.75 moles of Ca(OH)2 (calculated in part a) will react with (24.75/3) = 8.25 moles of Ca3(PO4)2. According to the chemical equation, 6 moles of H2O are produced for every 3 moles of Ca(OH)2 consumed. Therefore, 24.75 moles of Ca(OH)2 will produce (24.75 x 6)/3 = 49.5 moles of H2O.

We are given that there are 4.2 moles of water present, so using the ratio from the balanced chemical equation, we can determine that there are (8.25/49.5) x 4.2 = 0.7 moles of Ca3(PO4)2. To convert this to liters, we need to use the molar volume of a gas at standard temperature and pressure, which is 22.4 L/mol. Therefore, the volume of Ca3(PO4)2 present is 0.7 x 22.4 = 15.68 L.

To know more about Avogadro's number, visit:

https://brainly.com/question/11907018

#SPJ1

I have included an overview of the topics you MUST include in your presentation.
Topic Outlines:

Biomass (10 points)

1. What does “Biomass” mean? How is Biomass being used today as a substitute for gasoline to run cars, trucks or buses?

2. What are some different ways Biomass is being used to heat homes today?

3. Name and explain 3 advantages/disadvantages in using Biomass compared to using Fossil Fuels or other alternative energies (specifically include environmental issues that can happen).

4. Explain the energy conversions when producing energy with Biomass. (Use the words: Potential Energy and Kinetic Energy).

Geothermal (10 point)
5. Where does geothermal energy come from?

6. How can geothermal energy be used to create electricity?

7. How can geothermal energy be used directly to heat homes and factories?

8. What is a “heat pump”?

9. Name and explain 3 advantages and disadvantages in using geothermal energy compared to using fossil fuels and other alternative energies. (Specifically include environmental issues that can happen).

Hydroelectric (10 points)

10. What is a good definition of hydroelectric power?

11. How does “moving water” get turned into electrical energy? Explain each part of the dam from the moving water to production of electricity.

12. Name and explain 3 advantages/disadvantages of getting electricity from hydroelectric power and how it compares to using fossil fuels or alternative energies. (specifically include environmental issues that can happen

13. Find one example in the U.S. that uses hydroelectric power to create electricity?

Answers

Biomass refers to any organic matter that comes from plants or animals, such as wood chips, crop residues, or animal waste. Biomass can be converted into various forms of energy, such as electricity, heat, and fuel, and is being used as a substitute for gasoline to run cars, trucks or buses by converting it into biofuels like ethanol, biodiesel, or biogas.

Biomass can be used to heat homes in several ways, such as burning wood pellets or chips in stoves or boilers, using agricultural waste or wood waste as fuel, or installing biogas digesters that can produce heat from organic waste.

Advantages of using biomass include:

1. Its renewable nature,

2. Its potential to reduce greenhouse gas emissions and dependence on fossil fuels, and

3. Its ability to provide local sources of energy.

Disadvantages include:

1. The high cost of production and transportation

2. The potential for deforestation and habitat loss

3. The release of pollutants and greenhouse gases during combustion

When producing energy with biomass, the potential energy stored in the organic matter is converted into kinetic energy by burning it or using other processes, such as gasification or pyrolysis, to release the energy. This kinetic energy can then be harnessed to generate electricity, heat, or fuel.

Geothermal energy comes from the heat that is generated from the Earth's core and mantle.

Geothermal energy can be used to create electricity by drilling wells into the Earth's crust and pumping hot water or steam to the surface, which can then drive turbines that generate electricity.

Geothermal energy can be used directly to heat homes and factories by circulating hot water or steam through pipes or using geothermal heat pumps.

A heat pump is a device that transfers heat from one place to another, such as from the ground to a building's heating system, by using a refrigerant to absorb and release heat.

Advantages of using geothermal energy include:

1. its low emissions and high efficiency,

2. its reliability and consistency,  

3. its potential for use in remote areas.

Disadvantages include:

1. the high upfront cost of installation,

2. the potential for depletion of geothermal reservoirs,

3. the risk of earthquakes and other geological hazards.

Hydroelectric power is a form of renewable energy that harnesses the power of moving water to generate electricity.

Moving water is channeled through a dam, which drives turbines that spin generators to produce electricity. The water is then released back into the river or diverted to another body of water. The dam also serves to regulate the flow of water and prevent flooding.

Advantages of using hydroelectric power include:its renewable nature, its potential for reliable and consistent power generation its ability to provide flood control and irrigation. Disadvantages include: the disruption of aquatic ecosystems, the potential for methane emissions from flooded land,  the high upfront costs of building dams and other infrastructure.

Hoover Dam, located on the Colorado River on the border between Arizona and Nevada, is a major example of a hydroelectric power plant in the U.S

What is the history of hydroelectric power?

The history of hydroelectric power dates back to the 19th century, with the development of water turbines and generators. The first hydroelectric power plant was built in Appleton, Wisconsin in 1882, by a man named H.J. Rogers.

However, the concept of using water to produce mechanical power had been around for centuries. In ancient times, waterwheels were used to power mills and other machinery, and in the Middle Ages, water power was used to operate various devices, such as water pumps, sawmills, and hammers.

Learn about  hydroelectric power here https://brainly.com/question/786046

#SPJ1

there are several elements whose atoms make more than one type of ion. Where in
the periodic table are these elements usually found?

Answers

Answer:

Explanation:

These are the transition metals.  Groups 3-12 also know as the "d" block elements

What mass of lithium chloride would contain 8.75g of chloride?

Answers

Explanation:

The molar mass of lithium chloride (LiCl) is approximately 42.39 g/mol.

To calculate the mass of LiCl that contains 8.75 g of chloride, we need to determine the amount of LiCl that corresponds to 8.75 g of chloride.

The chloride ion (Cl-) has a molar mass of approximately 35.45 g/mol. Therefore, the number of moles of chloride present in 8.75 g of chloride is:

8.75 g / 35.45 g/mol = 0.247 mol Cl-

Since each mole of LiCl contains 1 mole of Cl-, the number of moles of LiCl that contains 0.247 mol of Cl- is also 0.247 mol.

Therefore, the mass of LiCl that contains 8.75 g of chloride is:

0.247 mol LiCl x 42.39 g/mol = 10.46 g LiCl (rounded to two decimal places)

Therefore, 10.46 g of lithium chloride would contain 8.75 g of chloride.

As per the given details, 10.45 grams of lithium chloride would contain 8.75 grams of chloride.

We must first estimate the molar mass of chloride and then use stoichiometry to connect it to the molar mass of lithium chloride (LiCl), in order to calculate the mass of LiCl that would contain 8.75 grammes of chloride.

The molar mass of chloride (Cl) = 35.45 g/mol.

The molar mass of lithium chloride = 42.39 g/mol.

(8.75 g chloride) / (35.45 g/mol chloride) = (x g lithium chloride) / (42.39 g/mol lithium chloride)

Solving for the variable:

x = (8.75 g chloride) * (42.39 g/mol lithium chloride) / (35.45 g/mol chloride)

x ≈ 10.45 g lithium chloride

Thus, approximately 10.45 grams of lithium chloride would contain 8.75 grams of chloride.

For more details regarding molar mass, visit:

https://brainly.com/question/31545539

#SPJ6

What does conserving mass mean in a chemical equation? Responses There is equal number of each type of atom on the reactant and product side. There is equal number of each type of atom on the reactant and product side. There are more of each type of atom on the product side than on the reactant side. There are more of each type of atom on the reactant side than on the product side. There is an unequal number of each type of atom on both sides of the equation.

Answers

Conserving mass in a chemical equation means that there is an equal number of each type of atom on both the reactant and product side of the equation.

For which of the following reactions is ΔH∘rxn equal to ΔH∘f
of the product(s)? You do not need to look up any values to answer this question.
Check all that apply.

2Na(s)+F2(g)→2NaF(s)

2H2(g)+O2(g)→2H2O(g)

Na(s)+12F2(l)→NaF(s)

Na(s)+12F2(g)→NaF(s)

H2(g)+12O2(g)→H2O(g)

H2O2(g)→12O2(g)+H2O(g)

Answers

The appropriate product are: 2Na(s) + F₂(g) → 2NaF(s), Na(s) + 1/2F₂(g) → NaF(s) and H₂(g) + 1/2O₂(g) → H₂O(g).

What is chemical reactiοn?  

The prοcess by which οne οr mοre substances, referred tο as reactants, are changed intο οne οr mοre distinct substances, referred tο as prοducts, by the rearranging οf atοms and the breaking and fοrming οf chemical bοnds, is referred tο as a reactiοn. Chemical equatiοns that display the reactants οn the left and the prοducts οn the right, with an arrοw pοinting in the reactiοn's directiοn, can be used tο describe chemical reactiοns.

The amοunt οf energy released οr absοrbed when οne mοle οf a cοmpοund is prοduced frοm its cοmpοnent elements in their standard states at 1 atm and 25°C is knοwn as the standard enthalpy οf fοrmatiοn, οr Hf. The reactants must be in their standard states and the prοducts must be οne mοle οf the cοmpοund created frοm the cοnstituent elements in their standard states fοr a reactiοn tο have Hrxn equal tο Hf οf the prοduct(s).

These standards allοw us tο cοnclude that the subsequent reactiοns cοmply with the requirements:

2Na(s) + F₂(g) → 2NaF(s)

Na(s) + 1/2F₂(g) → NaF(s)

H₂(g) + 1/2O₂(g) → H₂O(g)

To know more about chemical reaction, visit:

brainly.com/question/29039149

#SPJ1

Acetic acid (HC2H3O2) is the active ingredient in vinegar. Calculate the mass percent composition of H in acetic acid.
Express the mass percent composition to four significant figures.

Answers

The molecular weight of acetic acid is:

2(12.01 g/mol) + 2(1.01 g/mol) + 4(16.00 g/mol) = 60.05 g/mol

The mass of one H atom in acetic acid is:

2(1.01 g/mol) = 2.02 g/mol

To calculate the mass percent composition of H in acetic acid, we divide the mass of H by the molecular weight of acetic acid, and then multiply by 100:

mass percent composition of H = (2.02 g/mol / 60.05 g/mol) x 100% = 3.36%

So that means, the mass percent composition of H in acetic acid is 3.36%, expressed to four significant figures.

Write the chemical reactions for the formation of the respective Grignard reagents from the reaction of magnesium with the following organic halides: iodomethane, bromobenzene, chlorocyclohexane

Answers

Answer:

Here are the chemical reactions for the formation of the respective Grignard reagents from the reaction of magnesium with the following organic halides:

Iodomethane:

Mg + CH3I → CH3MgI

Bromobenzene:

Mg + C6H5Br → C6H5MgBr

Chloropropane:

Mg + C3H7Cl → C3H7MgCl

Grignard reagents are formed when magnesium metal is reacted with an alkyl halide. The magnesium metal reacts with the halide to form a magnesium halide salt, and the alkyl group is displaced from the halide to form the Grignard reagent.

The Grignard reagent is a powerful nucleophile and can be used to synthesize a variety of organic compounds.

How many liters are in a 6M solution containing 17 moles?

Answers

Answer: There are 102,000,000 liters in the container.

HELP

A student in today's experiment produces 2.538 g of pure aspirin product. If commercial aspirin pills contain 325 mg of aspirin per pill, how many pills could be manufactured from the student's 2.538 g of product?

Answers

2.538g• 1000mg
———. = 2538 mg.
1g

2538
———. = 7.8
325

7 pills (you can’t have 0.8 pills).

•H₂O + SO3 → H₂ SO4
•PbSO4 → PbSO3 + 02
•C2H4 + O2 → CO2 + H₂O
•Mg + Fe2 O3 → Fe + MgO
•NaBr + H3PO4
•Na3PO4 + HBr
1. Synthesis
2. Decomposition
3.Single-
Replacement
4.Double-
Replacement
5. Combustion

Answers

The types of chemical reaction for the reactions given are.

Synthesis: H₂O + SO3 → H₂SO4

Decomposition: PbSO4 → PbSO3 + O2

Single- Replacement: Mg + Fe2O3 → Fe + MgO

Double- Replacement: NaBr + H3PO4 → Na3PO4 + HBr

Combustion: C2H4 + O2 → CO2 + H2O

Types of chemical reaction explained.Synthesis: A type of chemical reaction where two or more simple substances combine to form a more complex product.                   H₂O + SO3 → H₂ SO4: Water and sulfur trioxide react to form sulfuric acid, which is a more complex compound.Decomposition: A type of chemical reaction where a complex substance breaks down into two or more simpler substances.     PbSO4 → PbSO3 + 02: Lead(II) sulfate breaks down into lead(II) sulfite and oxygen gas.Single-Replacement: A type of chemical reaction where an element replaces another element in a compound.                                        Mg + Fe2 O3 → Fe + MgO: Magnesium replaces iron in iron oxide to form magnesium oxide, and iron is produced.Double-Replacement: A type of chemical reaction where two compounds exchange ions to form two new compounds.                  NaBr + H3PO4 → Na3PO4 + HBr: Sodium bromide and phosphoric acid exchange ions to form sodium phosphate and hydrobromic acid.Combustion: A type of chemical reaction where a fuel (typically a hydrocarbon) reacts with oxygen to produce carbon dioxide and water. C2H4 + O2 → CO2 + H₂O: Ethene (a hydrocarbon) reacts with oxygen to produce carbon dioxide and water.

Therefore, A chemical reaction is a process that leads to the transformation of one set of chemical substances to another set. In other words, it is the process by which atoms are rearranged to create new chemical compounds.

Learn more about chemical reaction below.

https://brainly.com/question/11231920

#SPJ1

What is the solubility of Mg(OH)₂ at a pH of 12.80? (Ksp Mg(OH)₂ is 1.6 × 10⁻¹³)

Answers

The calculations show that Mg(OH)₂ has a solubility of  3.5 × 10⁻⁵ M at a pH of 12.80.

The term pH, which stands for "potential of hydrogen ions," can be interpreted as a measurement of the molar concentration of hydrogen ions in a particular solution. Hence, the acidity, neutrality, or basicity of any chemical solution is often determined or specified using the power of hydrogen ions (pH).

Mg(OH)₂⇔Mg²⁺(aq)+2OH⁻(aq)

First of all, we would write the chemical equation for this chemical reaction that is appropriately balanced

The Ksp for the aforementioned chemical reaction is determined mathematically by:

Ksp = [Mg²⁺][OH⁻]²

Ksp = [x][2x]²

1.6 × 10⁻¹³ = 4x³

x = ∛4 × 10⁻¹⁴

x = 3.5 × 10⁻⁵ M.

The maximum amount of a chemical that will dissolve in a particular amount of solvent at a particular temperature is known as its solubility. Different compounds have very varying solubilities, which is a characteristic of a particular solute-solvent pair.

Learn more about solubility here

https://brainly.com/question/27278411

#SPJ1

hydrogen sulfide (H2S) burns in the air to produce sulfur dioxide and water according to the equation

2H2S + 3O2 --> 2SO2 + 2H2O
State the molecular, molar, and mass relationships indicated by equation

Answers

Answer:

The balanced equation:

2H2S + 3O2 → 2SO2 + 2H2O

indicates the following relationships:

Molecular relationship: For every 2 molecules of hydrogen sulfide (H2S) that react, 3 molecules of oxygen (O2) are consumed, producing 2 molecules of sulfur dioxide (SO2) and 2 molecules of water (H2O).

Molar relationship: For every 2 moles of H2S that react, 3 moles of O2 are consumed, producing 2 moles of SO2 and 2 moles of H2O.

Mass relationship: The ratio of masses of the reactants and products in the balanced equation can be used to calculate the mass relationship. The equation indicates that 2 moles of H2S react with 3 moles of O2, producing 2 moles of SO2 and 2 moles of H2O. Therefore, the mass of H2S consumed is proportional to the mass of O2 consumed, and the masses of SO2 and H2O produced are proportional to each other.

Number 5 please.
Show work.

Answers

Mr Clink has the genotype IOIO

Mrs Clink has genotype IOIA

The child can not belong to them because the IAIB genotype is not in the Punnet square shown

What is genotype?

Genotype refers to the genetic makeup of an organism, specifically the combination of alleles (different versions of genes) inherited from its parents. It determines the traits that an organism will express, including physical characteristics, behavioral traits, and susceptibility to certain diseases.

The mother's genotype in question 2 is IOIO

The father's genotype is IAIB

The baby belongs to them because it is possible from the Punnet square shown

Learn more about genotype:https://brainly.com/question/12116830

#spj1

How many mL of 2.25M H2SO4 are needed to react completely with 69.9g BaO2

Answers

Answer:

4 millllllermeeters jb

Scientists often review the results of other scientists' work. Which of the following is a good reason for this review? I. A scientist can receive credit for another scientist's work simply by reviewing it. II. Reviewing scientific results help to ensure that the results are accurate. III. Reviewing scientific results helps to ensure that scientists are objective when they perform experiments. IV. Sometimes additional important questions can be raised when a scientist's work is reviewed. A. I, III, and IV only B. II and IV only C. II, III, and IV only D. I, II, and III only

Answers

Answer:

The correct answer is B) II and IV only.

Explanation:

I. A scientist cannot receive credit for another scientist's work simply by reviewing it. Credit is given only to the person or team that did the research.

II. Reviewing scientific results is a crucial step in the scientific process to ensure that the results are accurate and reliable.

III. While reviewing scientific results can help ensure objectivity in the research process, it is not the main purpose of scientific review.

IV. Reviewing scientific results can lead to new and important questions, as well as identify areas for future research.

Therefore, options I and III are incorrect and option B is the best answer.

Answer:

The correct answer is B. II and IV only.

Explanation:

Explanation:

I. A scientist cannot receive credit for another scientist's work simply by reviewing it. Therefore, this option is incorrect.

II. Reviewing scientific results helps to ensure that the results are accurate. This is one of the most important reasons for reviewing scientific work, as it helps to maintain the integrity and credibility of scientific research.

III. Reviewing scientific results does not necessarily help to ensure that scientists are objective when they perform experiments. Therefore, this option is incorrect.

IV. Sometimes additional important questions can be raised when a scientist's work is reviewed. This is another important reason for reviewing scientific work, as it can help to stimulate new ideas and research directions.

Therefore, the only options that are valid are II and IV.

What is the mole ratio of ammonia (with a pKb of 4.75) to ammonium chloride in a buffer with a pH of 9.15

Answers

The Henderson-Hasselbalch equation can be used to calculate the mole ratio of ammonia to ammonium chloride pH is equal to pKb plus [tex]log(NH3/NH4Cl).[/tex]

The equation can be changed to answer the question: What is the mole ratio of ammonia?

Figure 1 depicts the chemical equation for producing ammonia and demonstrates that the mole ratio of ammonia to nitrogen gas is [tex]2:1[/tex]. As seen in the chemical reaction, one mole of nitrogen gas results in the production of two moles of ammonia.

How is the mole ratio determined?

By dividing the total number of moles by the smallest number of moles, you may determine the ratio or the number of moles of each element.

To know more about ammonia  visit:-

brainly.com/question/15409518

#SPJ9

Consider the reaction for the formation of aluminum oxide from aluminum and oxygen.


4Al(s)+3O2(g)⟶2Al2O3(s)Δ1


Express the enthalpy of the following reaction, Δ2,

in terms of Δ1.


2Al2O3(s)⟶4Al(s)+3O2(g)Δ2


Express the enthalpy of the following reaction, Δ3,

in terms of Δ1.


12Al(s)+9O2(g)⟶6Al2O3(s)Δ3


Express the enthalpy of the following reaction, Δ4,

in terms of Δ1.


2Al(s)+32O2(g)⟶Al2O3(s)Δ4

Answers

To solve for Δ2, we need to reverse the reaction and change the sign of Δ1:

2Al2O3(s)⟶4Al(s)+3O2(g)Δ2 = -Δ1

Therefore, Δ2 = -Δ1.

To solve for Δ3, we need to add the reactions for the formation of two moles of Al2O3 from aluminum and oxygen:

4Al(s)+3O2(g)⟶2Al2O3(s)Δ1

2Al2O3(s)⟶4Al(s)+3O2(g)Δ3

Adding these equations gives:

12Al(s)+9O2(g)⟶6Al2O3(s)Δ3

Therefore, Δ3 = 2Δ1.

To solve for Δ4, we need to divide the reaction for the formation of two moles of Al2O3 by two:

2Al(s)+3O2(g)⟶Al2O3(s)Δ1/2

Multiplying this equation by 16 gives:

32Al(s)+48O2(g)⟶16Al2O3(s)8Δ1/2

We can then cancel out the formation of 14 moles of Al2O3:

2Al(s)+32O2(g)⟶Al2O3(s)Δ4 = 8Δ1/2 - 7Δ1

Therefore, Δ4 = 8Δ1/2 - 7Δ1.

Calculate the decrease in temperature when 6.0 L at 21.0 °C is compressed to 3.0 L.

Answers

The decrease in temperature is 147.075 K. The SI unit for temperature is the kelvin (K), but it can also be measured in degrees Celsius (°C) or Fahrenheit (°F).

What is Temperature?

Temperature is a physical property that measures the degree of hotness or coldness of an object or system, as compared to a standard reference point. It is a measure of the average kinetic energy of the particles (atoms or molecules) in a substance or system.

To solve this problem, we need to use the Charles's law equation which states:

V1/T1 = V2/T2

where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

We can rearrange the equation to solve for T2:

T2 = (V2/T2) x T1

First, we need to convert the initial temperature from Celsius to Kelvin by adding 273.15:

T1 = 21.0°C + 273.15 = 294.15 K

The initial volume (V1) is 6.0 L, and the final volume (V2) is 3.0 L. Substituting these values into the equation, we get:

(6.0 L/294.15 K) = (3.0 L/T2)

Solving for T2, we get:

T2 = (3.0 L x 294.15 K) / 6.0 L

T2 = 147.075 K

Finally, we can find the decrease in temperature by subtracting the final temperature (T2) from the initial temperature (T1):

ΔT = T1 - T2

ΔT = 294.15 K - 147.075 K

ΔT = 147.075 K

Learn more about Temperature from the given https://brainly.com/question/26866637

#SPJ1

help due today :(

a student weighs out 2.0841 g of salicylic acid (C7H6O3). How many moles of salicylic acid is the student using in this experiment?

Answers

Find out the molar mass of salicylic acid, C7H6O3 :

Molar mass = 7(12) + 6(1) + 3(16) = 138 g mol-1

Now to find the mole, use the weigh of salicylic acid 2.0841g and divide by the molar mass 138 g mol-1

2.0841/138 = 0.01510217 = 0.015 mol

5. What measures how stressful exercise is on your body?
O A. Frequency
O B. Duration
O C. Volume
D. Intensity

Answers

Answer: D. Intensity

Explanation: Intensity is correct, because if you originally were working on a treadmill with a speed of 8, that is how much intensity your putting your body on. And if you put the speed for a treadmill at 11 to increase your exercise, you are increasing the speed you have to run, making it more intense. The more intense you make your workout or training, the more stressful exercise you are doing.

Hope this helps,

:)

A helium filled balloon had a volume of 30.2 L on the ground at 28°C and a pressure of 745 torr. After the balloon was released, it rose to an altitude where the temperature was -8°C and the pressure was 495 torr. What was the volume of the gas in the balloon at this altitude?

Answers

Answer:

The final volume of gas in the balloon is 40.0 L (nearest tenth).

Explanation:

To solve this problem we can use the Combined Gas Law.

Combined Gas Law

[tex]\boxed{\sf \dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}}[/tex]

where:

P₁ is the initial pressure.V₁ is the initial volume.T₁ is the initial temperature (measured in kelvin).P₂ is the final pressure.V₂ is the final volume.T₂ is the final temperature  (measured in kelvin).

Convert the temperatures given in Celsius to kelvin by adding 273.15:

[tex]\implies \sf 28^{\circ}C=28+273.15=301.15\;K[/tex]

[tex]\implies \sf -8^{\circ}C=-8+273.15=265.15\;K[/tex]

Therefore, the values to substitute into the formula are:

P₁ = 745 torrV₁ = 30.2 LT₁ = 301.15 KP₂ = 495 torrT₂ = 265.15 K

Substitute the values into the formula and solve for V₂:

[tex]\implies \sf \dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

[tex]\implies \sf \dfrac{745 \cdot 30.2}{301.15}=\dfrac{495 \cdot V_2}{265.15}[/tex]

[tex]\implies \sf V_2=\dfrac{745 \cdot 30.2 \cdot 265.15}{301.15 \cdot 495}[/tex]

[tex]\implies \sf V_2=40.01905...[/tex]

[tex]\implies \sf V_2=40.0\;L\;(nearest\;tenth)[/tex]

Therefore, the final volume of gas in the balloon is 40.0 L (nearest tenth).

A 1.000 g sample of decane, C10H22, is ignited in a bomb calorimeter. The temperature of the calorimeter increases from 20.0 to 78.8 C. If the heat capacity of the calorimeter is 810.1 J/ C, determine delta E for the combustion of decane.


This is the question, and I solved the q (decane) but don't know how to solve the delta E

Answers

The internal energy change for the combustion of decane is -6709097.77 J/mol.

How heat is defined by calorimeter?

The heat absorbed by the calorimeter is given by the expression:

q = CΔT

where q is the heat absorbed by the calorimeter, C is the heat capacity of the calorimeter, and ΔT is the change in temperature of the calorimeter.

Substituting the given values, we get:

q = 810.1 J/ C x (78.8 C - 20.0 C) = 47213.48 J

This heat is released during the combustion of decane. Therefore, the enthalpy change for the combustion of decane (ΔH) can be calculated using the expression:

ΔH = -q/moles of decane

The molecular weight of decane is 142.28 g/mol. Therefore, the number of moles of decane in 1.000 g of decane is:

moles of decane = mass of decane / molecular weight of decane

= 1.000 g / 142.28 g/mol

= 0.007032 mol

Substituting the values, we get:

ΔH = -47213.48 J / 0.007032 mol = -6709097.77 J/mol

This is the enthalpy change for the combustion of decane. However, we are asked to calculate the internal energy change (ΔE) for the combustion of decane. The relationship between enthalpy change and internal energy change is given by the expression:

ΔH = ΔE + PΔV

where P is the pressure and ΔV is the change in volume. In the case of a bomb calorimeter, the volume remains constant, and therefore ΔV is zero. Therefore, we can write:

ΔH = ΔE

Substituting the value of ΔH, we get:

ΔE = -6709097.77 J/mol

Therefore, the internal energy change for the combustion of decane is -6709097.77 J/mol.

To know more about Temperature visit :-

https://brainly.com/question/25677592

#SPJ1

Do you think these portions of the DNA get transcribed? (JUNK DNA) Why or why not?

Pls needed answer asap thnku smmm

Answers

Yes, a research in 2012 called the ENCODE project showed that about 75% of noncoding DNA or Junk DNA do get transcribed.

What is Junk DNA?

The term "Junk DNA" is often used to refer to regions of the DNA that do not appear to code for functional genes, and their function or lack thereof is still a subject of active research and debate in the scientific community.

While it was once believed that these non-coding regions of DNA were "junk" and had no functional role, recent research has shown that some of these regions may have important regulatory functions, such as controlling gene expression or modulating chromosome structure.


In 2012, the ENCODE project determined that around three-quarters of the noncoding DNA in the human genome did undertake transcription and that almost half of the genome was accessible to proteins involved in genetic control such as transcription factors.

Some scientists, however, have questioned these findings, claiming that the accessibility of these genomic sequences to transcription factors does not necessarily imply that they have any biochemical significance or that transcription of the segments is favorable in terms of evolution.

Learn more about Junk DNA on:
https://brainly.com/question/11080028
#SPJ1

Indicate the type of intermolecular forces hold liquid nitrogen (N2) together?

Answers

Answer:

Nitrogen liquefies at -195.8°C at room temperature.

At -182.95°C, the periodic table equivalent (oxygen) boils.

The boiling point of nitrogen is lower because there are fewer interactions between nitrogen molecules (N2).

The degree of electron fluctuation within a molecule affects interactions between non-polar molecules.

Van der Waals forces are the oldest sort of intermolecular contact, named after Dutch chemist Johannes van der Waals.

The Van der Waals forces, which include dipole-dipole and dispersion forces, are the weakest intermolecular forces.

how to determine if a molecule will be soluble, insoluble, or form a micelle in water? explanation and example please

Answers

The solubility of a molecule in water depends on several factors including its polarity, surface area, and hydrogen bonding potential. A molecule that is polar and has hydrogen bonding groups is more likely to be soluble in water due to the strong interactions between the water molecules and the polar groups in the molecule. In contrast, a molecule that is nonpolar and lacks hydrogen bonding groups will likely be insoluble in water.

A micelle is formed when a molecule has both polar and nonpolar regions. The polar regions interact with the water molecules, while the nonpolar regions interact with each other, forming a stable structure in solution. An example of a molecule that can form a micelle in water is a fatty acid, which has a polar carboxyl group and a nonpolar hydrocarbon chain.

Overall, the solubility or insolubility of a molecule in water, as well as the formation of micelles, depends on the chemical and physical properties of the molecule, including its polarity and hydrogen bonding potential.

Other Questions
Can somebody find me a pencil to write please by the time of the 1828 presidential election, a new had begun to emerge out of the divisions within the republican party. multiple choice question. multi-party system system of regional alliances variable-party system because we do not know if the population distribution is approximately normal. because the large sample condition is not met. they should proceed, all of the conditions are met. because the 10% condition is not met. because the random condition is not met. Despite the threat of violent consequences, many enslaved people tried to:A.work harder for enslavers.B.escape from enslavers.C.send letters to abolitionists.D.file court cases against enslavers. What is the figurative language in the following sentence the 50 pound barbell that Janet had stared at for the last three months would be her own personal trophy when she was finally strong enough to lift it tom is the manager of happy feet, a corporation that designs and sells children's shoes. as manager, tom gets an insider tip and decides to sell some of his stock in the company, making a ton of money for himself. what is tom's insider trading an example of? question 3 options: an act of fiduciary duty the normal job responsibility of a manager the proper responsibility of a corporate manager a wise business deal improper and illegal corporate governance during the planning phase of the writing process, group of answer choices evaluate content. determine scope. outline coherent paragraphs. adapt your ideas to the audience's needs. choose strong, meaningful words. growth of global business as a critical element in the world economy is known as: a. internationalization. b. market awareness. c. multinationalism. d. legitimization. a severe reduction or complete absence of emotional responses to the environment in people with schizophrenia is called . group of answer choices argues that a strategic trade policy aimed at establishing domestic firms in a dominant position in a global industry boosts national income at the expense of other countries. What is the measure of Angle X? How do I get domain for (x-7)(x-1) over (x+3)(x-1) a parallel-plate capacitor has a plate area of 12.9 cm2 and a capacitance of 9 pf . what is the plate separation? the value of the permittivity of a vacuum is in the nineteenth century, pools, trusts, and mergers were: group of answer choices seen as beneficial by consumers. ways that manufacturers sought to control the marketplace. unheard of. used only rarely. What is the volume on 13.44g of O2 gas at STP? if company a decided to use the predictor weighting approach to making the final selection decision, and if the weight for the five selection methods is 1 for gma, 0.8 for conscientious personality test, 0.7 for work sample test, 0.6 for reference checking, and .5 for structured interview, which applicant would be hired? Fill in the blank: january is friends with many people who drink alcohol to excess. ____ would suggest that this differential association would increase the odds that ____ Henry Ford paid his workers $5 a day in 1914 when the CPI was 10. Today with a price index at 177, the $5 a day is worth $88.50. True or false? Can someone help me PLEASE HELP....Dilations