The equilibrium potentials for Na⁺ = +71.7 mV , K⁺ = -95.9 mV and for Cl⁻ = -81.9 mV in a common bipedal primate, whose body temperature is 38°C .
a)
ENa = 61 [log (150/10)] mV
= 61 X (1.176) mV
= +71.7 mV
EK = 61 [log (3/112)] mV
= 61 X (-1.572) mV
= -95.9 mV
ECl = -61 X log([Cl-]out/[Cl-]in)
= -61 X (1.342)
= -81.9 mV.
b) Action potential depolarizations approach ENa but rarely reach it. As a result, Vm may become inside-positive up to +71.7 mV during an action, but no higher.
[ Since most action potentials end too quickly for the membrane to become this positive, the transmembrane potential is likely to be slightly less positive than this at the action potential peak.]
Potential depolarization :When an internal change alters the distribution of electric charges within a cell, depolarization occurs, leaving the cell with a lower negative charge than the outside. Depolarization is necessary for many cell functions, cell-to-cell communication, and an organism's overall physiology.
Incomplete question :
In a common bipedal primate, whose body temperature is 38oC, the ionic concentrations inside and outside a typical nerve cell are shown below Ion Inside Outside
Na+ 10 mM, 150 mM
K+ 112 mM, 3 mM
Cl- 4 mM, 88 mM
a) Calculate the equilibrium potentials for Na+, K+, and Cl-.
b) What is the most positive voltage to which an action potential could go in this organism?
Learn more about potential depolarization :
brainly.com/question/14924515
#SPJ4
choose the molecule(s) that will only show two signals, with an integration ratio of 2:3, in their 1h nmr spectum.
One molecule that could show two signals with an integration ratio of 2:3 in its 1H NMR spectrum is propanal ([tex]CH_3CH_2CHO[/tex]).
This molecule has two distinct types of protons: the two methyl ([tex]CH_3[/tex]) groups and the aldehyde (CHO) proton. The methyl protons will appear as a triplet due to coupling to the neighboring protons, while the aldehyde proton will appear as a singlet. The integration ratio of the methyl protons to the aldehyde proton is 2:1, which is equivalent to 2:3 when simplified. Therefore, propanal is a good example of a molecule that could show two signals with an integration ratio of 2:3 in its 1H NMR spectrum.
To learn more about NMR click here https://brainly.com/question/20111886
#SPJ11
use the molar volume of a gas, at stp, to determine the number of moles of co2 in 4.00 l of co2 gas.
There are apprοximately 0.179 mοles οf CO₂ in 4.00 L οf CO₂ gas at STP.
What is mοle ?A mοle is defined as 6.02214076 × 1023 οf sοme chemical unit, be it atοms, mοlecules, iοns, οr οthers. The mοle is a cοnvenient unit tο use because οf the great number οf atοms, mοlecules, οr οthers in any substance.
The mοlar vοlume οf a gas at STP (Standard Temperature and Pressure) is 22.4 liters/mοl. Tο determine the number οf mοles οf CO₂ in 4.00 L οf CO₂ gas, we can use the fοllοwing equatiοn:
Number οf mοles = Vοlume (in liters) / Mοlar vοlume
Number οf mοles = 4.00 L / 22.4 L/mοl
Number οf mοles ≈ 0.179 mοles
Therefοre, there are apprοximately 0.179 mοles οf CO₂ in 4.00 L οf CO₂ gas at STP.
Learn more about molar volume
https://brainly.com/question/29884686
#SPJ4
Check all of the reasons that you included in your answer. Copper oxide is the only product, and it contains copper and oxygen. One of the reactants is copper, so the other reactant must be oxygen. The copper metal must have combined with something in the air.
Answer:
that something in the air is oxygen
Answer:
check all of them
Explanation:
Our goal is to obtain an approximate length of the stearic acid molecule Concentration of stearic acid solution Average number of drops in 1 ml. Volume of 1 drop of solution Diameter of water surface Area of water surface Number of drops of solution needed to 0.11 g/L 13.5 create a monolayer of stearic acid a) Using the concentration of the stearic acid solution calculate the grams of stearic acid per drop. b) Using the number of drops of solution delivered to the water surface to make the monolayer calculate how many grams of stearic acid were needed to make a monolayer c) Using the density of stearic acid (0.85 g/mL) and the mass of stearic acid calculate the volume of stearic acid in cm in the monolayer. (I mL-1 cm) d) Calculate the thickness (L) in cm of the monolayer using L = Volume/Area. e) Convert the thickness in cm to Angstroms.
a) To calculate the grams of stearic acid per drop, we need to use the concentration of the stearic acid solution. The concentration is given as 0.11 g/L. Since 1 mL is equivalent to the average number of drops in 1 mL, we can calculate the grams of stearic acid per drop as follows:
Grams of stearic acid per drop = (Concentration of stearic acid solution in g/L) / (Average number of drops in 1 mL)
b) To calculate the grams of stearic acid needed to make a monolayer, we can multiply the number of drops of solution delivered to the water surface (provided in the question) by the grams of stearic acid per drop calculated in part (a).
c) Using the density of stearic acid (0.85 g/mL) and the mass of stearic acid calculated in part (b), we can calculate the volume of stearic acid in cm³ in the monolayer. Since the density is given in g/mL, the volume can be determined using the formula:
Volume of stearic acid = Mass of stearic acid / Density of stearic acid
d) To calculate the thickness (L) of the monolayer, we can divide the volume of stearic acid in cm³ by the area of the water surface. The area of the water surface is not provided in the question, so it would need to be obtained from additional information.
e) To convert the thickness in cm to Angstroms, we can multiply the thickness in cm by a conversion factor. 1 cm is equivalent to 10,000 Angstroms, so the thickness in Angstroms can be calculated by multiplying the thickness in cm by 10,000.
a) The concentration of the stearic acid solution is provided as 0.11 g/L. To find the grams of stearic acid per drop, we divide this concentration by the average number of drops in 1 mL.
b) The number of drops of solution delivered to the water surface is given in the question. To calculate the grams of stearic acid needed to make a monolayer, we multiply this number by the grams of stearic acid per drop calculated in part (a).
c) The density of stearic acid is given as 0.85 g/mL. Using this density and the mass of stearic acid calculated in part (b), we can determine the volume of stearic acid in cm³ in the monolayer.
d) To calculate the thickness of the monolayer, we divide the volume of stearic acid in cm³ by the area of the water surface. The area of the water surface is not provided in the question, so additional information is needed to perform this calculation accurately.
e) To convert the thickness from cm to Angstroms, we multiply the thickness in cm by the conversion factor of 10,000 since 1 cm is equivalent to 10,000 Angstroms.
By following the steps outlined above, you can determine the grams of stearic acid per drop, the grams of stearic acid needed to make a monolayer, the volume of stearic acid in cm³ in the monolayer, the thickness of the monolayer in cm, and finally, the conversion of the thickness to Angstroms. However, please note that the calculations depend on additional information such as the area of the water surface, which is not provided in the given question.
To know more about stearic acid, visit :
https://brainly.com/question/16233112
#SPJ11
what is the coefficient for fe(s) in the balanced version of the following chemical equation: fe(s) o2(g)→fe2o3(s)
The coefficient for Fe(s) in the balanced chemical equation Fe(s) + O2(g) → Fe2O3(s) is 4.
In order to balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation.
On the left side, we have 1 Fe atom, and on the right side, we have 2 Fe atoms in Fe2O3. This means we need to multiply Fe(s) by 2 to balance the Fe atoms.
Next, we need to balance the oxygen atoms. On the left side, we have 2 O atoms in O2, and on the right side, we have 3 O atoms in Fe2O3. To balance the oxygen atoms, we need to multiply O2(g) by 3.
Therefore, the balanced chemical equation is:
4 Fe(s) + 3 O2(g) → 2 Fe2O3(s)
From the balanced equation, we can see that the coefficient for Fe(s) is 4, indicating that 4 moles of Fe(s) are required to react with 3 moles of O2(g) to form 2 moles of Fe2O3(s).
Learn more about chemical equation here:
https://brainly.com/question/28792948
#SPJ11
How can the increase in energy of particles (increased vibration) be used to explain changes of
state?
The increase in energy of particles increases the movement and kinetic energy of the particles changing their state of matter.
Particles or matter change their state either by absorbing or releasing energy usually in the form of heat or thermal energy. When a particle is given this thermal energy and absorbs it, the kinetic energy of these particles increases. Thereby increasing their movement across the medium.
This results in rapid movement and the force of attraction between the particles decrease. They spread out changing their state of matter. In the case of water, when ice is heated, the water molecules absorb heat and move around turning ice into water.
To learn more about the change of state:
https://brainly.com/question/18372554
Frequently magnesium is coated with magnesium oxide. Write the reaction of magnesium oxide with hydrochloric acid.
When magnesium oxide reacts with hydrochloric acid (HCl), it forms magnesium chloride ([tex]MgCl_2[/tex]) and water ([tex]H_2O[/tex]).
The reaction between magnesium oxide (MgO) and hydrochloric acid (HCl) is an example of an acid-base reaction. In this reaction, the magnesium oxide acts as a base and reacts with the hydrochloric acid to form magnesium chloride and water. The chemical equation for this reaction is as follows:
[tex]\[\text{{MgO}} + 2\text{{HCl}} \rightarrow \text{{MgCl}}_2 + \text{{H}}_2\text{{O}}\][/tex]
In the reaction, the hydrochloric acid (HCl) donates a proton (H+) to the magnesium oxide (MgO), which acts as a base and accepts the proton. This results in the formation of magnesium chloride ([tex]MgCl_2[/tex]), which is a salt, and water ([tex]H_2O[/tex]).
The reaction between magnesium oxide and hydrochloric acid is an example of a neutralization reaction, where an acid and a base react to form a salt and water. Magnesium chloride is a white, crystalline solid, and water is formed as a byproduct of the reaction. This reaction is exothermic, meaning it releases heat.
To learn more about magnesium oxide refer:
https://brainly.com/question/24605172
#SPJ11
how many ml of 0.200 m of aluminum chloride solution will contain 6.00 millimoles of chloride ions?
The volume of the 0.200 M aluminum chloride solution required to contain 6.00 millimoles of chloride ions is 10 mL.
To determine the volume of a 0.200 M aluminum chloride (AlCl3) solution that contains 6.00 millimoles of chloride ions (Cl-), we need to use the concept of molarity and stoichiometry.
First, we need to convert the given 6.00 millimoles of chloride ions (Cl-) into moles by dividing by 1000 since there are 1000 millimoles in a mole. Therefore, we have 6.00 × 10^-3 moles of Cl-.
Since aluminum chloride (AlCl3) has a 1:3 stoichiometric ratio of aluminum ions (Al3+) to chloride ions (Cl-), we know that 1 mole of AlCl3 contains 3 moles of Cl-.
To find the moles of AlCl3 required, we divide the moles of Cl- by 3: (6.00 × 10^-3 moles Cl-) / 3 = 2.00 × 10^-3 moles AlCl3.
Next, we can use the equation Molarity (M) = moles / volume (L) to calculate the volume of the AlCl3 solution needed. Rearranging the equation to solve for volume, we have volume (L) = moles / Molarity.
Substituting the values, we get volume (L) = (2.00 × 10^-3 moles) / 0.200 M = 0.010 L.
Finally, to convert the volume from liters to milliliters, we multiply by 1000. Therefore, the volume of the 0.200 M aluminum chloride solution required to contain 6.00 millimoles of chloride ions is 10 mL.
learn more about stoichiometry Refer: https://brainly.com/question/30808199
#SPJ11
what volume of 0.160 mli2s solution is required to completely react with 255 ml of 0.165 mco(no3)2 ? express your answer in milliliters to three significant figures.
The balanced chemical equation for the reaction between mli2s and co(no3)2 is:
2mli2s + co(no3)2 → 2licl + cos + 2no2 + h2o
From the equation, we can see that two moles of mli2s react with one mole of co(no3)2. Therefore, we need to use the mole ratio to find out how much mli2s is required to react with 255 ml of 0.165 mco(no3)2.
Moles of co(no3)2 = (0.165 mol/L) x (0.255 L) = 0.042075 mol
According to the mole ratio, we need twice as many moles of mli2s to react with the given amount of co(no3)2. Therefore, the required moles of mli2s are:
Moles of mli2s = 2 x Moles of co(no3)2 = 2 x 0.042075 mol = 0.08415 mol
Now we can use the molarity and volume of the mli2s solution to find out how much volume is required to obtain 0.08415 moles of mli2s.
Molarity of mli2s = 0.160 mol/L
Volume of mli2s = Moles of mli2s / Molarity of mli2s = 0.08415 mol / 0.160 mol/L = 0.5259 L
Finally, we need to convert the volume to milliliters and round off the answer to three significant figures:
Volume of mli2s = 0.5259 L x 1000 mL/L ≈ 526 mL ≈ 526 ml
Therefore, the volume of 0.160 mli2s solution required to completely react with 255 ml of 0.165 mco(no3)2 is approximately 526 ml.
To solve this problem, we can use the concept of stoichiometry. The balanced chemical equation for the reaction between I2 and Co(NO3)2 is:
2Co(NO3)2 + 3I2 → 2CoI3 + 6NO3^-
From the balanced equation, we see that 2 moles of Co(NO3)2 react with 3 moles of I2. Now, we can use the given concentrations and volumes to find the moles of each reactant:
moles of Co(NO3)2 = (0.165 M)(0.255 L) = 0.042075 mol
Using the stoichiometry from the balanced equation:
moles of I2 required = (0.042075 mol Co(NO3)2) * (3 mol I2 / 2 mol Co(NO3)2) = 0.0631125 mol I2
Now, we can use the concentration of the I2 solution to find the volume needed:
volume of I2 solution = (0.0631125 mol I2) / (0.160 M) = 0.394453125 L Converting this to milliliters and expressing the answer in three significant figures:
volume of I2 solution = 394 mL
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ11
How would you describe light generated by heating pure elements if it was observed through a prism or spectroscope?
If you were to observe light generated by heating pure elements through a prism or spectroscope, you would notice a unique spectral pattern. The spectral pattern would appear as a series of colored lines separated by dark spaces, and this is known as the atomic spectrum of the element.
Each pure element has its own distinct atomic spectrum, which arises due to the arrangement of electrons in the element's atoms. The electrons in the atoms occupy energy levels, and when they transition between these levels, they emit or absorb light at specific wavelengths. These wavelengths correspond to the different colors observed in the atomic spectrum. Therefore, the use of a prism or spectroscope can reveal valuable information about the composition of the element, as well as its electronic structure. Overall, studying the spectral patterns of different pure elements can provide insight into the fundamental building blocks of matter and the interactions of atoms with light.
To know more about Elements visit:
https://brainly.com/question/8460633
#SPJ11
Silver Chloride has a larger Ksp than silver carbonate (Ksp = 1.6x10‐10 and 8.1x10‐12 respectively). Does this mean that AgCl also has a larger molar solubility than Ag2CO3? Explain
Silver Chloride has a larger Ksp than silver carbonate (Ksp = 1.6x10‐10 and 8.1x10‐12 respectively. it indicates that more AgCl can dissolve per liter compared to [tex]Ag_2CO_3[/tex]. Therefore, AgCl has a larger molar solubility than [tex]Ag_2CO_3[/tex].
To determine whether silver chloride (AgCl) has a larger molar solubility than silver carbonate, we need to compare their respective solubility product constants (Ksp). The Ksp value represents the equilibrium constant for the dissolution of a sparingly soluble salt in water.
For AgCl, the dissociation equation is:
[tex]\[\text{AgCl} \rightleftharpoons \text{Ag}^+ + \text{Cl}^-\][/tex]
The Ksp expression is:
[tex]\[Ksp_{\text{AgCl}} = [\text{Ag}^+] \cdot [\text{Cl}^-]\][/tex]
For Ag2CO3, the dissociation equation is:
[tex]\[\text{Ag2CO3} \rightleftharpoons 2\text{Ag}^+ + \text{CO}_3^{2-}\][/tex]
The Ksp expression is:
[tex]\[Ksp_{\text{Ag2CO3}} = [\text{Ag}^+]^2 \cdot [\text{CO}_3^{2-}]\][/tex]
Comparing the two Ksp expressions, we can see that AgCl has a larger Ksp because it does not involve a squared term like [tex]Ag_2CO_3[/tex]. This indicates that the molar solubility of AgCl is larger than that of [tex]Ag_2CO_3[/tex].
Molar solubility refers to the number of moles of a substance that can dissolve in a liter of solution. Since AgCl has a larger Ksp, it indicates that more AgCl can dissolve per liter compared to [tex]Ag_2CO_3[/tex]. Therefore, AgCl has a larger molar solubility than [tex]Ag_2CO_3[/tex].
Learn more about molar solubility here:
https://brainly.com/question/31778415
#SPJ11
Given below are statements that summarize the characteristics of α, β, and γ rays. Identify the characteristics that correspond to each type of radiation.
1. it is symbolized as 4/2 He
2. it has the weakest penetrating power
3. It is a hig-speed electron
4. It possesses neither mass nor charge
5. it has the dtrongest penetrating power
6. its is symbolized as 0/-1e
7. it is the most massive of all the components
Radioactive decay refers to the spontaneous process by which unstable atomic nuclei transform or "decay" into more stable configurations by emitting radiation. α, β, and γ rays are types of ionizing radiation emitted during radioactive decay processes. The characteristics of α, β, and γ rays can be identified as follows:
α rays:
It is symbolized as 4/2 He.
It possesses neither mass nor charge.
It is the most massive of all the components.
β rays:
It is a high-speed electron.
It is symbolized as 0/-1e.
γ rays:
It has the weakest ionization power.
It has the strongest penetrating power.
Learn more about radioactive decay here ;
https://brainly.com/question/1770619
#SPJ11
1100.0 g of Fe contains how many moles?
Answer:
19.6 mole
Explanation:
because Fe molar mass is 56
A galvanic cell at a temperature of 25.0°C is powered by the following redox reaction: ?2VO2(aq)+4H+(aq)+Fe(s)--->2VO2+(aq)+2H2O(l)+Fe2+(aq) Suppose the cell is prepared with 2.26 M VO+2 and 2.85 M H+ in one half-cell and 2.91 M VO+2 and 1.03 M Fe+2 in the other. Calculate the cell voltage under these conditions. Round your answer to 3 significant digits.
The question asks to calculate the cell voltage of a galvanic cell at [tex]25.0^0C[/tex] powered by a specific redox reaction involving [tex]VO_2[/tex],[tex]H^+[/tex], and Fe.
To calculate the cell voltage, we need to determine the reduction potentials of the half-reactions involved. The reduction potential for the reaction [tex]2VO_2+(aq) + 2H_2O(l) + 2e^-[/tex] → [tex]2VO_2(aq) + 4H^+(aq)[/tex] can be found in a standard reduction potential table. Its value is 1.00 V. The reduction potential for the reaction[tex]Fe_2^+(aq)[/tex]→ [tex]Fe(s) + 2e^-[/tex]can also be found in the table, and its value is -0.44 V.
To calculate the cell voltage, we subtract the reduction potential of the anode (Fe2+ to Fe) from the reduction potential of the cathode ([tex]VO_2^+[/tex] to [tex]VO_2[/tex]). The cell voltage is thus:
1.00 V - (-0.44 V) = 1.44 V
Therefore, the cell voltage under the given conditions is 1.44 V.
the calculations are based on standard reduction potentials and may vary with temperature and concentration changes.
Learn more about galvanic cells here:
https://brainly.com/question/29784730
#SPJ11
In the reaction Cd(s) + Sn2+(aq) --> Cd2+ (aq) + Sn (s), the Sn2+ is reduced. Thus it A. is called the reducing agent and it loses electrons. B. is called the oxidizing agent and it loses electrons. C. is called the oxidizing agent and it gains electrons. D. is called the reducing agent and it gains electrons,
In the given reaction [tex]Cd(s) + Sn_2+(aq)[/tex] → [tex]Cd_2+(aq) + Sn(s), Sn_2+[/tex] is the reducing agent and it gains electrons.
In a redox reaction, oxidation and reduction occur simultaneously. The species that undergoes oxidation is called the reducing agent, while the species that undergoes reduction is called the oxidizing agent. In the given reaction, [tex]Sn_2+[/tex] is reduced to Sn(s), which means it gains electrons and undergoes a reduction reaction.
To understand this, let's look at the oxidation states of the elements involved. In the reactant side, the oxidation state of Sn in [tex]Sn_2+[/tex] is +2, while the oxidation state of Cd in Cd(s) is 0 (since it is in its elemental form). In the product side, the oxidation state of Sn in Sn(s) is 0, and the oxidation state of Cd in [tex]Cd_2+[/tex](aq) is +2. We can observe that the oxidation state of Sn decreases from +2 to 0, indicating reduction, while the oxidation state of Cd increases from 0 to +2, indicating oxidation.
Since [tex]Sn_2+[/tex] undergoes reduction by gaining electrons, it is the reducing agent in the reaction. Thus, the correct answer is D. It is called the reducing agent and it gains electrons.
To learn more about reducing agent refer:
https://brainly.com/question/12549467
#SPJ11
what is the shape of [cr(nh3)3 cl3 ]-3group of answer choicesocahedraltetrahedralsquare plannertriangular
The shape of [Cr(NH3)3Cl3]-3 is octahedral.
This means that the complex ion has six ligands attached to the central chromium atom, arranged at the vertices of an octahedron. The three ammonia ligands are arranged in an equatorial plane, while the three chloride ligands are arranged in an axial plane perpendicular to the equatorial plane. The octahedral shape is a common geometry for six-coordinate transition metal complexes, and it allows for efficient bonding with a wide variety of ligands. The complex ion is also overall negatively charged, due to the presence of three chloride ions, which act as counterions to the positively charged central chromium atom. The shape of the complex ion [Cr(NH3)3Cl3]-3 is octahedral. In this complex, the central metal ion (Cr) is surrounded by six ligands - three ammonia (NH3) molecules and three chloride (Cl-) ions. These ligands are arranged at the vertices of an octahedron, with each ligand equidistant from the central ion, resulting in an octahedral geometry. This shape is common in coordination compounds, providing stability and symmetry for the complex ion.
To know more about octahedral visit:
https://brainly.com/question/17204989
#SPJ11
in the reaction h3po4(aq) 3nh3(aq)⟶3nh 4(aq) po3−4(aq), the product nh 4(aq) is the __________.
In the reaction H3PO4(aq) + 3NH3(aq) ⟶ 3NH4(aq) + PO3-4(aq), the product NH4(aq) is the ammonium ion.
The ammonium ion (NH4+) is formed as a product in the reaction. It is a polyatomic ion composed of one nitrogen atom bonded to four hydrogen atoms. In this reaction, each ammonia molecule (NH3) donates a hydrogen ion (H+) to the phosphoric acid (H3PO4), resulting in the formation of three ammonium ions (NH4+). The presence of the ammonium ion in the aqueous solution indicates the formation of a salt.
Know more about ammonium ion here:
https://brainly.com/question/17122793
#SPJ11
part a what is the subshell structure for the ground state of a neon atom? what is the subshell structure for the ground state of a neon atom? [2,8] [2,(2,6)] [2,(2,5)] [2,(3,5)]\
The subshell structure fοr the grοund state οf a neοn atοm is [2, 8]. Thus, option A is correct.
What is subshell structure?Subshell structure refers tο the arrangement and distributiοn οf electrοns within the electrοn shells and subshells οf an atοm. It describes the number οf electrοns present in each subshell οf an atοm in its grοund state.
The subshell structure is represented by a series οf numbers οr electrοn cοnfiguratiοns, indicating the number οf electrοns in each subshell. Fοr example, the subshell structure οf neοn is [2, 8], which means there are 2 electrοns in the 1s subshell and 8 electrοns in the 2s and 2p subshells cοmbined.
Learn more about Subshell
https://brainly.com/question/19221869
#SPJ4
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools by: A. melting B. evaporation C. condensation D. conduction.
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools primarily by reducing heat loss through conduction. The aluminum foil acts as a barrier that slows down the transfer of heat from the potato to its surroundings, keeping it warm for a longer period.
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools by reducing the process of conduction. Conduction is the transfer of heat between two objects that are in contact with each other. When a hot potato is left in open air, it transfers heat to the surrounding air molecules through conduction, resulting in a rapid decrease in temperature. However, wrapping the potato in aluminum foil prevents direct contact with the air, which decreases the rate of conduction and keeps the potato hotter for a longer period. Therefore, the correct answer is D. conduction.
To know more about conduction visit:
https://brainly.com/question/31201773
#SPJ11
The amino acid arginine can be synthesized by ____ pathway that requires seven enzymes. Wild type bacteria should _____ production of these enzymes if arginine is present in the enviorment.
a. an anabolic; repress
b. an anabolic; induce
c. a catabolic; repress
d. a catabolic; induce
The amino acid arginine can be synthesized by an anabolic pathway that requires seven enzymes. Wild type bacteria should repress production of these enzymes if arginine is present in the environment. Your answer: a. an anabolic; repress
The amino acid arginine can be synthesized by a pathway that requires seven enzymes.Wild type bacteria should induce production of these enzymes if arginine is present in the environment. This is because the presence of arginine signals to the bacteria that it is available as a nutrient source, and the bacteria will need to produce the necessary enzymes to synthesize it. The pathway for arginine synthesis is an anabolic process, meaning it requires energy and building blocks to create larger molecules from smaller ones. Therefore, the bacteria need to increase enzyme production to facilitate this process. Repression would not make sense in this context, as it would inhibit the synthesis of a necessary nutrient.
To know more about anabolic pathway visit:
https://brainly.com/question/30627429
#SPJ11
Methyl methacrylate has a mola mass of 100 g/mole. When a sample of methyl methacrylate weighing 3. 14 g was completely combusted ,the only products formed were 6. 91 g of CO2and 2. 26 of water. What is methyl methacrylate's molecular formula ?
The molecular formula of methyl methacrylate if its weighing 3.14 g was completely combusted and the only products formed were 6. 91 g of CO₂ and 2. 26 of water is C₅H₈O₂.
We have to determine the empirical formula of methyl methacrylate first and then multiply it by the integer n to determine the molecular formula. Empirical formula calculation:
CO₂ and H₂O are the combustion products of methyl methacrylate.
C₅H₈O₂ + (9n / 2)
O₂ → 5CO₂ + (n)H₂O
There are 5 C atoms and (8 + 2n), H atoms in the left and 5 C atoms, and n H atoms in the right.
5C = 5C, and 8 + 2n = nH.
n = 6
Molecular formula calculation is dividing the molecular weight by the empirical formula weight to determine the multiplication factor.
C₅HₙO₂ (empirical formula) has a weight of
(5 x 12.011) + (8 x 1.008) + (2 x 15.999) = 100.12 g/mol
The actual molecular weight of methyl methacrylate is 100 g/mol.
Therefore, the molecular formula is (C₅H₈O₂) x 1, which is C₅H₈O₂.
Learn more about molecular formula: https://brainly.com/question/29435366
#SPJ11
solution to provide 10 mEq of 9. A solution contains 12% glucose. Convert the concentration for mOsmol/L (MW of C6H12O6 = 180) (Round to the nearest tenth)
the concentration of the solution in mOsmol/L is 670 mOsmol/L.
To convert the concentration of a 12% glucose solution to mOsmol/L, we need to calculate the number of moles of glucose present in 1 liter of the solution.
12% glucose solution means that 12 g of glucose is present in 100 ml of the solution. Therefore, in 1 liter (1000 ml) of the solution, the amount of glucose present is:
12 g x 10 = 120 g
Using the molecular weight of glucose (MW of C6H12O6 = 180), we can calculate the number of moles of glucose present in 1 liter of the solution:
Number of moles of glucose = mass of glucose (in g) / molecular weight of glucose
= 120 g / 180 g/mol
= 0.67 moles
Finally, we can convert the concentration to mOsmol/L using the formula:
mOsmol/L = number of moles/L x 1000 x (osmol/mole)
The osmolality of glucose is 1 osmol/mole, so:
mOsmol/L = 0.67 moles/L x 1000 x 1 osmol/mole
= 670 mOsmol/L
Therefore, the concentration of the solution in mOsmol/L is 670 mOsmol/L.
To know more about glucose visit:
https://brainly.com/question/13555266
#SPJ11
Aluminium is quite abundant in the soils. It can have a beneficial or toxic effect on plants depending on its concentration. Explain, with the use of equations, why A|3+ is unavailable to plants at high pH (high
concentration of hydroxide ions).
At high pH levels (high concentration of hydroxide ions), aluminum ions (Al3+) become unavailable to plants.
In soils, aluminium can exist in the form of aluminium ions (Al3+). The solubility of aluminium ions is influenced by the pH of the soil solution. At high pH levels, there is an abundance of hydroxide ions (OH-) in the soil solution. When hydroxide ions are present in high concentrations, they react with aluminium ions to form insoluble aluminium hydroxide [tex](Al(OH)_3)[/tex]. The reaction can be represented by the equation:
[tex]Al_3+ + 3OH - > Al(OH)_3[/tex]
The formation of aluminium hydroxide reduces the availability of aluminium ions for uptake by plant roots. This is because the aluminium hydroxide precipitates and forms solid particles that are not easily accessible to plant roots. Consequently, plants are unable to absorb aluminium in the form of Al3+ when the soil pH is high.
In summary, at high pH levels, the presence of hydroxide ions in the soil solution leads to the formation of insoluble aluminium hydroxide, rendering aluminium ions (Al3+) unavailable to plants.
To learn more about pH levels refer:
https://brainly.com/question/4137247
#SPJ11
co(g) effuses at a rate that is ______ times that of br2(g) under the same conditions.
The rate of effusion of Co(g) is approximately 1.646 times that of [tex]Br_2[/tex](g) under the same conditions.
The rate of effusion of a gas Is inversely proportional to the square root of its molar mass. Therefore, to compare the effusion rates of Co(g) and [tex]Br_2[/tex](g), we need to compare their molar masses.
The molar mass of cobalt (Co) is 58.93 g/mol, while the molar mass of bromine is 159.81 g/mol. Now we can calculate the ratio of their effusion rates:
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(Molar mass([tex]Br_2[/tex]) / Molar mass(Co))
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(159.81 g/mol / 58.93 g/mol)
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(2.71)
Rate(Co) / Rate([tex]Br_2[/tex]) ≈ 1.646
Therefore, the rate of effusion of Co(g) is approximately 1.646 times that of [tex]Br_2[/tex](g) under the same conditions.
The reason for this difference in effusion rates is due to the inverse relationship between molar mass and effusion rate. Since bromine has a larger molar mass compared to cobalt (Co), it has a slower effusion rate. Smaller molecules with lower molar masses effuse faster compared to larger molecules with higher molar masses, as they have higher average velocities and can escape through a smaller opening more easily.
Learn more about rate of effusion here:
https://brainly.com/question/29808345
#SPJ11
Which of the following statements DOES NOT best describe chemical equilibrium? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Reactants form products as fast as products form reactants. The frequencies of the reactant and product collisions are identical. C The rate of product and reactant molecules are identical. The concentrations of products and reactants are identical.
Chemical equilibrium refers to a state in a chemical reaction where the concentrations of reactants and products no longer change over time. In other words, the forward and reverse reactions occur at the same rate, resulting in a constant composition of substances in the system.
The statement that DOES NOT best describe chemical equilibrium is: "The concentrations of products and reactants are identical." While equilibrium does involve a balance between the rates of formation of products and reactants, it does not necessarily mean that their concentrations are equal. Rather, the concentrations will reach a state of dynamic balance where the forward and reverse reactions occur at the same rate, resulting in no net change in the concentration of either reactants or products.
Learn more about Chemical equilibrium here ;
https://brainly.com/question/4289021
#SPJ11
HIO_3 behaves as acid in water HIO_3 (aq) IO_3^- (aq) + H^+ (aq), with K_c = 0.17 at 25 degree C. What is the H^+ concentration in a solution that is initially 0.50 M HIO_3? a. 0.34 M b. 0.29 M c. 0.22 M d. 0.28 M
The H^+ concentration in a solution initially containing 0.50 M HIO_3 can be calculated using the equilibrium constant (K_c) and the stoichiometry of the balanced equation. The H^+ concentration is approximately 0.22 M (option c).
The given equilibrium reaction is HIO_3 (aq) -> IO_3^- (aq) + H^+ (aq) with a K_c value of 0.17 at 25 degrees Celsius. This indicates that the equilibrium strongly favors the reactant side.
To determine the H^+ concentration, we can set up an ICE (initial, change, equilibrium) table. Initially, the concentration of H^+ is zero since there are no H^+ ions present before the reaction. The change in concentration is x for both H^+ and IO_3^-, and the equilibrium concentration of H^+ is x.
Using the equilibrium constant expression:
K_c = [IO_3^-][H^+]
Substituting the given K_c value of 0.17 and the equilibrium concentration of H^+ as x, we have:
0.17 = x^2
Solving for x, we find x ≈ 0.41 M.
Therefore, the H^+ concentration in the solution is approximately 0.22 M (option c).
learn more about equilibrium constant Refer: https://brainly.com/question/19671384
#SPJ11
complete question:
HIO_3 behaves as acid in water HIO_3 (aq) IO_3^- (aq) + H^+ (aq), with K_c = 0.17 at 25 degree C. What is the H^+ concentration in a solution that is initially 0.50 M HIO_3? a. 0.34 M b. 0.29 M c. 0.22 M d. 0.28 M e.0.17M
which corresponds to the composition of the ion typcially fomally formed by magnesium?
We can see here that the ion that corresponds to the composition of the ion typically formed by magnesium is:
12 protons
10 electrons
2+
What is magnesium?The chemical element magnesium has the atomic number 12 and the letter Mg as its symbol. It is an alkaline earth metal, which is a glossy gray metal, according to the periodic table. Magnesium is present in many minerals and is the eighth most common element in the crust of the Earth.
Magnesium is a thin, highly reactive metal in its pure form. It is valued in applications where a combination of low weight and high strength is required due to its good strength-to-weight ratio.
Learn more about magnesium on https://brainly.com/question/5759562
#SPJ1
determine the concentration of hydroxide ions for a 25∘c solution with a poh of 12.40.
The concentration of hydroxide ions in the solution at 25°C, with a pOH of 12.40, is approximately 3.98 x 10^(-13) mol/L.
To determine the concentration of hydroxide ions in a solution at 25°C with a pOH of 12.40, we can use the relationship between pOH and hydroxide ion concentration. The pOH is defined as the negative logarithm (base 10) of the hydroxide ion concentration. Mathematically, it can be expressed as pOH = -log[OH-].
Given that pOH = 12.40, we can calculate the hydroxide ion concentration by taking the antilogarithm (10 raised to the power of the negative pOH value). So, [OH-] = 10^(-pOH).
Substituting the given value into the equation, we have [OH-] = 10^(-12.40). Evaluating this expression, we find that the concentration of hydroxide ions in the solution is approximately 3.98 x 10^(-13) mol/L.
For more such questions on hydroxide
https://brainly.com/question/21393201
#SPJ8
You have available the following ingredients. Which one or ones could you use to make a pH=3 buffer? 1.5MKOH(aq) 3.0MHCl(aq) 1.0MNH 3(aq) 2.5MCH 3COOH(aq) 2.0MKHCOO(aq) 0.5MKCl(aq) Partially correct. The first step is to identify the conjugate acid/base pair that best matches the intended pH. Remember to write of If you only have one (weak acid or weak base) how do you make a solution that has both?
To make a pH=3 buffer solution, one possible choice from the given ingredients is 2.5M [tex]CH_3COOH[/tex] (acetic acid) and its conjugate base, 2.0M KHCOO (potassium acetate). If only one component is available, it is not possible to create a solution that has both a weak acid and its conjugate base, which are necessary for a buffer.
A buffer solution consists of a weak acid and its conjugate base (or a weak base and its conjugate acid) that can resist changes in pH when small amounts of acid or base are added. In this case, the desired pH is 3, so we need an acidic buffer.
From the given ingredients, 2.5M [tex]CH_3COOH[/tex] (acetic acid) is a weak acid, and its conjugate base is the acetate ion ([tex]CH_3COO-[/tex]. To create a pH=3 buffer, we would combine the acetic acid with its conjugate base, which is potassium acetate (KHCOO). Therefore, the correct choice for the buffer solution would be 2.5M [tex]CH_3COOH[/tex] and 2.0M KHCOO.
If only one component is available (either a weak acid or its conjugate base), it is not possible to create a buffer solution. Both the weak acid and its conjugate base are essential for maintaining the buffer's pH.
Learn more about buffer solution here:
https://brainly.com/question/31428923
#SPJ11
For the following redox reactions, identify the species being oxidized, the species being reduced, the oxidizing agent, and the reducing agent: 7) Ni + F2 --> NiF2 1
8) Fe(NO3)2 + Al --> Fe + + Al(NO3)3 19) Li + H20 --> LiOH + H2
7) In the reaction Ni + F2 --> NiF2, Ni is being oxidized (loses electrons) and F2 is being reduced (gains electrons). The reducing agent is Ni, as it provides electrons for the reduction, and the oxidizing agent is F2, as it accepts electrons during the oxidation.
8) In the reaction Fe(NO3)2 + Al --> Fe + Al(NO3)3, Al is being oxidized (loses electrons) and Fe2+ from Fe(NO3)2 is being reduced (gains electrons). The reducing agent is Al, and the oxidizing agent is Fe2+.
19) In the reaction Li + H2O --> LiOH + H2, Li is being oxidized (loses electrons) and H2O is being reduced (gains electrons). The reducing agent is Li, and the oxidizing agent is H2O.
In redox reactions, oxidation and reduction occur simultaneously. The species being oxidized loses electrons, while the species being reduced gains electrons. The oxidizing agent causes oxidation by accepting electrons, while the reducing agent causes reduction by donating electrons.
In reaction 7, Ni is being oxidized as it loses electrons and F2 is being reduced as it gains electrons. F2 is the oxidizing agent as it causes oxidation by accepting electrons, while Ni is the reducing agent as it causes reduction by donating electrons.
In reaction 8, Fe(NO3)2 is being reduced as it gains electrons and Al is being oxidized as it loses electrons. Al is the oxidizing agent as it causes oxidation by accepting electrons, while Fe(NO3)2 is the reducing agent as it causes reduction by donating electrons.
In reaction 19, Li is being oxidized as it loses electrons and H2O is being reduced as it gains electrons. H2O is the oxidizing agent as it causes oxidation by accepting electrons, while Li is the reducing agent as it causes reduction by donating electrons.
To know more about oxidation visit:
https://brainly.com/question/13182308
#SPJ11