Answer:
Explanation:
In specific fireworks, potassium nitrate breaks down into potassium oxide, nitrogen, and oxygen. This is an example of a combustion reaction. The opposite process is a SYNTHESIS REACTION.
which of the following is not used as part of the process of polymerase chain reaction.
a a thermocycler
b dna primers
c a virus
d a dna polymerase
Answer:
The correct answer is C) a virus.Explanation:
Polymerase chain reaction (PCR) is a laboratory technique used to amplify specific DNA sequences. The PCR process involves several key components, including a thermocycler, DNA primers, and a DNA polymerase. However, a virus is not typically used as part of the PCR process.
The thermocycler is used to control the temperature of the reaction mixture, which allows for the denaturation (separation) of double-stranded DNA, annealing of the DNA primers to the single-stranded DNA template, and extension of the primers by the DNA polymerase.
The DNA primers are short pieces of DNA that are complementary to the target DNA sequence and provide a starting point for DNA polymerase to extend and copy the DNA sequence.
The DNA polymerase is the enzyme responsible for adding nucleotides to the growing DNA chain during PCR.
In summary, a virus is not used as part of the process of polymerase chain reaction, while a thermocycler, DNA primers, and a DNA polymerase are all essential components.
27. The difference between a monitoring task and a shadowing task is that
a. The shadowing task allows the experimenter to be certain that attention has been devoted to the attended message
b. The shadowing task is more difficult than the monitoring task
c. The shadowing task requires the subject to repeat the attended message, whereas the monitoring task does not
d.Both A and C
What is definite growth
C. Give one word for the following.
1. a piece of stem that can grow into a new plant
Answer: Cutting
Explanation: Cuttings can be made from any part of the plant. Most frequently, however, either a stem or leaf is used. A stem cutting includes a piece of stem plus any attached leaves or buds. Thus, the stem cutting only needs to form new roots to be a complete, independent plant.
19. In the garden peas of one pair of alleles controls the height of the plant and a second pair of alleles controls flower colour. 'lhe allele for tall (T) is dominant to the allele for dwarf (t) and the allele for purple flower colour (P) is dominant to the allele for white (p).
a. A tall plant with purple flowers crossed with a dwarf plant with white flowers produced 50% tall, purple and 50% tall, white progeny. What is the genotype of the parents?
The dwarf plant with white flowers has the genotype ttpp, whereas the tall plant with purple blooms has the genotype TtPp.
What are the two alleles that affect pea flower colour?For instance, in pea plants, one gene controls bloom colour. Alleles are several variations of the same gene. The two different alleles here are purple flowers and white flowers.
What pea plant gene is expressed in terms of plant height and pod shape?The pea plant's chromosome number 4 contains the genes that control plant height, flowering time, and pod shape. Out of these three genes, the two that determine pod morphology and plant height are linked since they are closely spaced on the chromosome.
To know more about genotype visit:-
https://brainly.com/question/12116830
#SPJ9
2.05b thinking questions
The sea urchin is a slow-moving creature with a distinctive look. Its numerous sharp spines serve as an adaption to deter many possible predators. The correct option to this question is D.
What further differences do urchins have that might serve as survival adaptations?They have evolved a sharp beaked mouth, resembling the beak of a parrot, as an adaptation to this physical limitation. Its incredible camouflage skills for hunting prey and avoiding predators is another adaption.Purple sea urchins have developed lengthy spines that can extend up to half the width of their bodies, making some of them 3–4 inches across. These spines are efficient in discouraging predators who might consider this pincushion-shaped mammal to be an unappealing meal source.For more information on urchins kindly visit to
https://brainly.com/question/495746
#SPJ1
why are junk DNA “not so useless after all?”
Explanation:
Junk DNA, also known as non-coding DNA, was once thought to be useless or irrelevant because it does not contain instructions for making proteins, which are the building blocks of cells. However, recent research has shown that junk DNA plays important roles in regulating gene expression and controlling cellular processes.
For example, some regions of junk DNA contain regulatory elements called enhancers and silencers, which can activate or repress nearby genes. Other regions of junk DNA contain non-coding RNA molecules that can affect gene expression by interacting with other RNA or proteins. Junk DNA can also act as a buffer to protect important genes from mutations or chromosomal rearrangements.
Additionally, scientists have discovered that some types of junk DNA have been conserved throughout evolution, suggesting that they have important functions that have been maintained over millions of years. For example, transposable elements, which are mobile pieces of DNA that can move around the genome, have been shown to play important roles in gene regulation, genome organization, and evolution.
leave a comment
You have just joined the local fitness club and sign up for the help of a personal trainer. However, he/she has you doing exercises where you push against the wall with your arms or stand and squat with your back
against the wall. What type of exercises are you doing?
isometric
tonic
isotonic
p90x
Answer:
these exercises comes under the category of ISOTONIC exercises
Which function is linear?
The function that is linear is (a) x/8-2.
What is function?In mathematics, a function is a rule that maps each element (input) from a set called the domain to a unique element (output) from a set called the range. A function can be thought of as a machine that takes an input and produces an output based on the given rule. The input variable of a function is typically denoted by a symbol such as x, and the output variable is denoted by a symbol such as y. The function itself is denoted by a symbol such as f, and the rule that relates the input and output is usually expressed using algebraic or other mathematical expressions.
Here,
In option (a), the coefficient of x is 1/8, which means that for every 1 unit increase in x, y decreases by 1/8 units. This constant rate of change satisfies the definition of a linear function. To be linear, a function must have a constant rate of change, meaning that as the input variable (x) increases or decreases by a certain amount, the output variable (y) changes by a constant amount.
Options (b), (c), and (d) are not linear functions because they contain a term with x raised to the power of 2 or -1, which causes the rate of change to vary depending on the value of x. Therefore, their rates of change are not constant, and they cannot be linear functions.
To check whether a function is linear, you need to determine whether it satisfies the criteria of a linear function. A linear function is a function that has a constant rate of change, meaning that as x increases by a certain amount, y increases by a consistent multiple of that amount. Mathematically, a linear function can be written in the form:
y = mx + b
where m is the slope (rate of change) of the line, and b is the y-intercept (the point where the line intersects the y-axis).
To check whether a function is linear, you can plot its graph and see if it forms a straight line. If the graph is a straight line, then the function is linear. However, if the graph is curved, then the function is not linear.
To know more about function,
https://brainly.com/question/19918770
#SPJ1
The diagram below shows an ecological pyramid. Which statement best describes why the top segment containing the owl is smaller than the bottom
segment containing plants?
A. Owl are much smaller organisms than blades of grass
B. Grass needs more energy to grow than owls
C. The owls need more space than grass
D. There is less biomass of owls than there is of grass
A. Owl are much smaller organisms than blades of grass. This is the best explanation because the size of the segments in the ecological pyramid is determined by the size of the organisms they represent.
What is ecological pyramid?An ecological pyramid is a graphical representation of the biomass or abundance of organisms in different trophic levels of a food chain in an ecosystem. It is used to show the energy flow through different trophic levels and how energy is lost through the ecosystem. The base of the pyramid consists of the primary producers, which are usually plants that use the energy of the sun to make their own food. The primary consumers, which are typically herbivores, come next. Further up the pyramid are the secondary consumers, which are carnivores, and at the top are the tertiary consumers, which are typically apex predators.
Since owls are much smaller than blades of grass, the segment representing owls is much smaller.
To learn more about ecological pyramid
https://brainly.com/question/19345731
#SPJ1
Which layers of sedimentary rock at Grand Staircase Escalante National Monument do you think are the oldest? Use evidence to support your claim.
The oldest layers of the sedimentary rock at Grand Staircase Escalante National Monument is the chocolate layer.
Chocolate layer of sedimentary rock at Grand Staircase Escalante National MonumentIt is the oldest layer because it was the first layer that was formed. It was formed between 200 to 225 million years ago. It was made up of kaibab limestone and served as bottom layer of the Grand staircase.
The Grand staircase is made up of five layers and they are listed from youngest to oldest below.
Pink Cliffs.Grey Cliffs.White Cliffs.Vermilion Cliffs.Chocolate Cliffs.The Grand staircase is made up of sedimentary rock and it is of different colorful layers.
Learn more about sedimentary rock here
https://brainly.com/question/7437433
#SPJ1
9. The diagram shows rock layers found in a mountain. Some of the rock layers have fossils. The ages of the fossils are given in the table. write one letter in each blank to correctly complete the sentence
One letter in each blank is 1. C. 1,2. D. 2, 3. F. 6,4. I. next to
Describe Fossils?Fossils are the preserved remains or traces of organisms that lived in the past. They can be found in various forms, including bones, teeth, shells, imprints, and tracks. Fossils provide a window into the history of life on Earth and offer valuable insights into the evolution of different species over millions of years.
Fossils are typically formed when an organism's remains are buried in sediment or other materials, such as ash from volcanic eruptions. Over time, the sediment or other materials harden and eventually form rock, preserving the organism's remains. Fossilization can also occur through other processes, such as petrification or replacement, where the original organic material is replaced by minerals.
Fossils are important to scientists because they provide evidence of how life on Earth has evolved over time. By studying fossils, scientists can learn about the anatomy, behavior, and habitats of extinct species, as well as how they are related to modern organisms. Fossils also provide a record of major events in Earth's history, such as mass extinctions and the evolution of different ecosystems.
1. C. 1
2. D. 2
3. F. 6
I. next to
To know more about species visit:
https://brainly.com/question/22813932
#SPJ1
The statement suggests that the fossil found in layer 7 is approximately 1 million years old. Furthermore, there are 3 layers that are older than layer 7, and 2-3 layers that are younger than layer 7.
This information can be used to infer the relative ages of the rock layers, as older rocks are typically found below younger rocks due to the principle of superposition.
The principle of superposition states that in an undisturbed sequence of sedimentary rocks, the oldest rocks will be at the bottom, while the youngest rocks will be at the top. Therefore, we can conclude that the 3 layers that are older than layer 7 are located below it, while the 2-3 layers that are younger are located above it.
The statement also mentions that younger rocks are deposited above older rocks. This refers to the process of sedimentation, where new layers of sedimentary rock are deposited on top of older layers over time. This process can help to explain the relative ages of the rock layers and the fossil found in layer 7.
Overall, this statement provides some basic information about the relative ages of the rock layers and the fossil found in layer 7, and how they can be used to understand the geological history of the area.
To know more about sedimentation, visit:
https://brainly.com/question/14306913
#SPJ1
HELP ME PLEASE - they need to be organised within the right column
e. An interaction where organisms rely on one another for survival.
Competition:d. An interaction to gain a share of a limited resource.
Both:a. An interaction between animal or plant species.
b. An interaction between two individual organisms.
f. An example is an interaction between hyenas, vultures, and a dead hippo.
g. An example is an interaction between the milkweed plant and monarch butterfly.
Statement (c) is not applicable to this categorization as none of the statements suggest that only animal species can interact in a certain way.
What is an organisms?
An organism is any living individual entity that has a cellular structure and can carry out basic life processes such as metabolism, growth, reproduction, and response to stimuli. Organisms can be unicellular (such as bacteria) or multicellular (such as plants, animals, and fungi).
What is survival?
Survival refers to the ability of an organism or a population of organisms to remain alive and functional in their environment, despite the presence of various stressors or challenges that may threaten their existence.
To know more about survival, visit:
https://brainly.com/question/26098341
#SPJ1
A population of bacteria grows in a petri dish under ideal conditions until it
runs out of space. Which curve accurately reflects the growth of this
population?
OA. A J-curve
B. A survivorship curve
C. An S-curve
OD. A life span curve
11. How can you make sustainable changes to your diet?
O A. Make small changes to your current diet.
O B. Follow the newest fad diet with your friends.
C. Build a new diet from scratch.
D. Aim to have a perfect diet.
Biology 3.03 Lab: Dichotomous Key 1. I desperately need help.
Create a dichotomous key that identifies the 10 leaves on the Common Leaves sheet. Look closely at those leaf samples and devise a dichotomous key that helps you identify them. Be sure that your dichotomous key contains only pairs of statements about a single characteristic. For example, a pair of statements might be:
A. leaf margin smooth
B. leaf margin toothed
However, you should avoid pairs of statements that do not address the same characteristic. The following pair, for example, would not be very informative in your key:
A. leaf margin smooth
B. leaf type needle-like
As you develop your key, test it out with the 10 leaves provided on the Common Leaves sheet. When you've developed a key that identifies all 10 leaves, type your statements, “go tos,” and identifications, following the format in the example below. The example is based on this lesson’s dichotomous key for birds.
Once you have completed your dichotomous key, answer the two remaining questions. When you are finished, submit this assignment to your teacher by the due date for full credit.
1. Complete a dichotomous key for the 10 leaves on the Common Leaves sheet. The chart provided here allows for 11 pairs of statements. Depending on how you build your dichotomous key, you may or may not need all of them, or you may need to add some.
2. Can more than one dichotomous key be developed to identify the same group of organisms? Explain. To answer this question, refer to this lesson’s dichotomous key for birds.
Answer:
Type your answer here.
3. If two different people use the same dichotomous key to identify the same organism, should they have different results? Explain.
Answer:
Type your answer here
I apologize if this makes no sense at all.
The following could serve as a dichotomous key to identifying the ten leaves: Oval or elliptic in shape. linear or lanceolate in form. cordate or triangular in form. Orbicular or reniform leaves. Oval or spatulate leaves. smooth leaf margin
What does a dichotomous leaf key entail?An instrument that assists in the identification of different leaf species is a dichotomous key for leaves. By offering two different explanations for each observation, it aids in the classification of species.
What kind of plant has a dichotomous key, specifically?For instance, a dichotomous key in tree identification would inquire as to whether the tree has leaves or needles. If the tree has leaves, the key then sends the user down one set of questions; if the tree has needles, an other list of questions is presented.
To know more about dichotomous key visit:-
https://brainly.com/question/2235448
#SPJ1
Define the definition: Codominant
Suppose a student wanted to design an experiment to determine the effects of nitrates on algal growth. What would be the student's dependent variable?
Answer:
The dependent variable in this experiment would be the algal growth.
Explanation:
The dependent variable is the variable that is being measured or observed in the experiment and is affected by the independent variable, which in this case is the nitrates. The purpose of the experiment is to determine how the nitrates affect the growth of algae, so the growth of the algae is the dependent variable that the student would be measuring or observing.
How do the characteristics of the viceroy butterfly aid in its survival?
Answer:
Since the viceroy has the same size, shape, and coloration as with the monarch, the deception of the viceroy to the predators, making the predators think that the viceroy is a monarch, makes the predator avoid the viceroy, hence aid in survival
Add pedigree generation and individual numbers following standard pedigree nomenclature
b. Explain symbols for the following subjects:
• I-2
• II-6 and II-7
• III-2
• III-4
• III-6 and III-7
• III-10
• III-11
• IV-1
In the exposed Pedigree, I-2: Dead man. II-6/II-7: Dizygotic twins. III-2: Individual interested in its genotypel/phenotype. III-4: Affected woman. III-6/ III-7: Monozygotic twins. III-10: Carrier individual with autosomal dominant gene. III-11: Carrier individual with autosomal recessive gene or sex-linked gene. IV-1: gender not defined
What is a pedigree?
A Pedigree is the representation of a family's history. This graph is used to track a trait through different generations, and analyze the inheritance pattern of a particular gene and its expression.
It is a tool used to understand how genes are transmitted from the parental generation to the descendants, and what are the probabilities of inheriting them.
Pedigree interpretation.
Family members→ Individuals are represented with geometrical figures and a number.→ Males are squares→ Females are circles→ Undefined gender is rhombus→ Dead family members are represented by a figure obliquely crossed by a line. Relationship→ Simple horizontal line bonding two figures represent a couple's relationship→ A single vertical line represents descendence→ Two vertical lines emerging from the same origin are twins→ Horizontal lines represent a fraternal relationship→ Double horizontal lines represent consanguinity cross Genotypes→ Solid or empty figures represent homozygous individuals. → Heterozygous individuals are represented with the same figure as homozygous dominant.→ Black and White figures (or figures crossed by vertical lines) represent asymptomatic heterozygous individuals. This is the case of autosomal dominant inheritance. → Figures with a dot inside represent asymptomatic heterozygous individuals. This is the case of autosomal recessive inheritance or recessive sex linkage. Trait/Phenotype→ Healthy/normal/not affected individuals are represented with empty figures→ Affected/mutated individuals are represented with solid black figures Generations→ Each file is represented with a roman number, indicating the Generation.a. You will find the complete image in the attached files
b. Explain symbols for the following subjects:
• I-2 → Dead man
• II-6 and II-7 → Dizygotic twins (not identical)
• III-2 → Individual who is interested in its genotype or phenotype
• III-4 → Affected woman
• III-6 and III-7 → Monozygotic twins (identical)
• III-10 → Carrier individual with autosomal dominant gene
• III-11 → Carrier individual with autosomal recessive gene or sex-linked recessive gene
• IV-1 → Unborned baby - Individual whose gender is not defined
You can learn more about pedigrees at
https://brainly.com/question/19516649
#SPJ1
Identify Center for Disease Control (CDC) regulations that impact healthcare practices. (Hint:
Discuss how the CDC regulations will impact you and others in the healthcare environment.)
The CDC plays an important role in protecting public health and safety by providing evidence-based recommendations and guidelines to healthcare providers and public health officials.
Identify Center for Disease Control (CDC) regulations that impact healthcare practices.The Centers for Disease Control and Prevention (CDC) is a federal agency in the United States that is responsible for protecting public health and safety through the prevention and control of disease, injury, and disability.
The CDC has developed guidelines for preventing and controlling the spread of infectious diseases in healthcare settings. These guidelines cover topics such as hand hygiene, personal protective equipment (PPE), isolation precautions, and environmental cleaning.
Learn more about CDC:https://brainly.com/question/15887044
#SPJ1
The Mississippi River starts at an elevation of 1,460 ft and runs for 376 miles. What is it's average slope to the nearest ten-thousandth place?
We can see from the calculation that the average slope to the nearest ten-thousandth place is 2.7926 ft/mi
What is the average slope?To calculate the average slope of the Mississippi River, we need to divide the change in elevation by the length of the river:
Average slope = (elevation change) / (river length)
The elevation change is the difference between the starting elevation and the ending elevation. Since we don't have the ending elevation, we can't calculate the actual slope, but we can estimate it using the average elevation change over the length of the river. According to the USGS, the average elevation of the Mississippi River at St. Louis, Missouri is 410 ft. Therefore, the elevation change over the length of the river is:
Elevation change = 1460 ft - 410 ft = 1050 ft
Now we can calculate the average slope:
Average slope = 1050 ft / 376 miles = 2.7926 ft/mi
Learn more about average slope:https://brainly.com/question/3841552
#SPJ1
Debris from the west coast of the U.S. often collects in the Great Pacific Garbage Patch. What are the most likely impacts to marine life in this area?
The plastic decreases the pH of the water, causing changes to the food web.
Organisms here are less likely to get tangled in plastic.
Organisms along the shore are more likely to eat the plastics that gather near shorelines and clog waterways.
Microplastics contain harmful chemicals that can accumulate in the food chain
Option D. The most ;likely impact of the plastics is that Microplastics contain harmful chemicals that can accumulate in the food chain. Last option
What are the harmful effects of plasticsThe most likely impacts of the Great Pacific Garbage Patch on marine life are related to ingestion, entanglement, and habitat alteration.
Ingestion of plastic debris by marine animals is a significant problem in the Great Pacific Garbage Patch. Small pieces of plastic can be mistaken for food by a wide variety of marine organisms, including zooplankton, fish, birds, and sea turtles. This can lead to internal injuries, blockages, and even death.
Entanglement is another major issue. Plastic debris can wrap around the fins, flippers, and other body parts of marine animals, which can cause severe injuries, impair their ability to swim or eat, or even cause drowning.
Read more on plastics here:https://brainly.com/question/25834689
#SPJ1
PLEASE ANSWER.
Why is it important to only have one independent variable?
(A)There is no reason why.
(B)Because it has always been done that way.
(C)Because if you are changing multiple independent variables, it would be difficult to determine which independent variable is causing the change in the dependent variable.
(D)You can have multiple independent variables.
As long as the experiment is repeated a sufficient number of times, it does not matter how many variables are used. Yes, an experiment should test only one variable at a time. This ensures that the experimental outcome is clearly due to one identifiable factor.
The list shows the results of six athletes competing in the long jump, which has a target distance of 20 feet.
12 feet, 11 feet, 13 feet, 10 feet, 20 feet, 12 feet
Which best describes the results?
The list shows that three out of six athletes (or 50%) were unable to meet or exceed the target distance of 20 feet, with the remaining athletes recording jumps between 10 and 20 feet. The median distance jumped is 12 feet, which means that half of the athletes jumped less than 12 feet and the other half jumped distances greater than 12 feet.
Overall, the results suggest that the athletes have varying levels of ability in the long jump, with some unable to meet the target distance and others jumping distances close to or exceeding the target.
HELP PLSSS!!
What are TWO ways fruits and flowers aid in a plants sexual reproduction?
A- by forming seeds
B- by dispersing seeds
C- by protecting living tissue
D- by covering living tissue
Answer:
A- by forming seeds
B- by dispersing seeds
Explanation:
The two ways fruits and flowers aid in a plant's sexual reproduction are:
By forming seeds: Fruits are the mature ovaries of flowering plants and contain seeds that develop from fertilized ovules. This process of forming seeds is essential for sexual reproduction in plants, as it allows for the creation of new plants that are genetically diverse.
By attracting pollinators: Flowers are the reproductive structures of flowering plants and are responsible for attracting pollinators such as bees, butterflies, and birds. These pollinators transfer pollen from the male reproductive structures of one flower to the female reproductive structures of another, leading to fertilization and the formation of seeds.
Therefore, fruits and flowers play crucial roles in the sexual reproduction of plants, by forming and dispersing seeds and by attracting pollinators.
Is the red blood cell the only true cell in the human body
Answer:no
Explanation:
Rowena is conducting an important team meeting. One of her team members is
constantly disrupting the meeting by taking personal calls during the meeting. By
doing so, he is hence disrespecting the
of others.
Consider the reason a peer interrupted you at the initial place when it happens. Keep their goal in mind. You should make straight eye contact with interrupter and say, "Mike, I'm going to complete my point.
Why is it crucial for teams to meet frequently?In team meetings, you may communicate critical information, make sure everyone feels heard, and discuss future plans. Every team member should leave a staff meeting feeling inspired, motivated, and pleased with their accomplishments from the previous week.
Which issue frequently arises in meetings?Leaders frequently have trouble at meetings because they don't allow enough time to fully explore a topic. After the initial subjects, leaders often neglect to account for subtopics, clarification queries, and planning for further stages. Solution: Keep each meeting's topic simple.
To know more about interrupted visit:
https://brainly.com/question/17976158
#SPJ1
using a simple food chain what is the correct order or sequence of energy transfer
Answer:
Sun, plant, mouse, snake, owl.
Explanation:
Always the first two are the light and the vegetation. The factory is represented as a Producer, followed by the main customer. An omnivore or vegetarian is the main eater. The rodent would be included in this group. The intermediate customer is third. Carnivores are the final consumers. It consumes the main user. The serpent is a great example of this. The owl is the last but not the least of our ravenous consumers.
3. If cells are placed in a strong salt (hypertonic) solution, water will
3% salt
1% salt
a. pass from the salt solution to the cells
b. pass from the cells to the salt solution
c. stay in the cell
d. pass back and forth
See diagram below.
Answer:
The correct answer is b. pass from the cells to the salt solution.
Explanation:
When cells are placed in a hypertonic solution, such as a strong salt solution, the concentration of solutes outside the cell is higher than the concentration inside the cell. This creates a concentration gradient that drives water out of the cell in an attempt to balance the concentration of solutes.
As a result, water will pass from the cells to the salt solution, causing the cells to shrink and become dehydrated. This process is known as crenation.
In the given scenario, both the 3% and 1% salt solutions are hypotonic to the strong salt solution, meaning that they have a lower concentration of solutes than the strong salt solution. Therefore, water would also pass from the cells to these solutions, although to a lesser extent than in the strong salt solution.