In four sentences or less, briefly explain the difference
between breaking waves from arriving swell and breaking waves from
local wind generation?

Answers

Answer 1

Breaking waves from arriving swell are generated by distant storms or weather systems and travel long distances across the ocean before reaching the coastline.

These waves have longer wavelengths and are more organized and uniform in shape. On the other hand, breaking waves from local wind generation are created by wind blowing over the immediate area and generating waves on the spot. These waves tend to be choppier, shorter in wavelength, and more irregular in shape compared to swell waves. Local wind generation refers to the process where wind blowing over a specific area creates waves on the spot. It occurs when the wind interacts with the water surface, transferring energy and causing the formation of waves.

Learn more about coastline link:

https://brainly.com/question/31443316

#SPJ11


Related Questions

True/false: monsoon wilds are known for their daily directional changes.

Answers

True. Monsoon winds are characterized by their daily directional changes.

During the monsoon season, the wind changes its direction twice a day, blowing from the sea towards the land during the daytime and from the land towards the sea during the night. This is because of the temperature difference between the land and sea. During the day, the land heats up faster than the sea, causing the air to rise, creating low pressure over the land. This low pressure draws in moist air from the sea, resulting in a sea breeze. At night, the land cools down faster than the sea, causing the air to sink, creating high pressure over the land. This high pressure draws in dry air from the land, resulting in a land breeze. These daily changes in wind direction are a characteristic feature of the monsoon season in many parts of the world, including South Asia and Southeast Asia.

To know more about Monsoon winds visit:

https://brainly.com/question/28919659

#SPJ11

If the global average annual temperature warms by 1.1-4.4°C, what changes will occur in the distribution of precipitation?

Answers

The expected changes in the distribution of precipitation due to an increase in the global annual average temperature of 1.1–4.4°C can differ based on a number of variables and regional dynamics.

Climate change is the term used to describe the long-term, progressive changes in precipitation, temperature, and wind patterns among other climate indicators. The amount of water evaporating into the atmosphere rises as ocean temperatures rise. More intense precipitation, such as heavier rain and snowstorms, can result from the movement of more moisture-rich air across land or the convergence of more of it into a storm system.

Learn more about Temperature here:

https://brainly.com/question/7510619

#SPJ1

identify the common characteristics of nucleated settlements Why do you think it is the most common type of settlement in the world

Answers

Common characteristics of nucleated settlements include:

Dense clustering of buildings and structuresCompact and centralized layoutOften located around a central point or feature

What are nucleated settlements?

A nucleated village, also known as a clustered settlement, is one of the most common forms of settlement design. Geographers and landscape historians use this phrase to categorize settlements.

In India, nucleated villages are mainly found in areas where agriculture is practiced extensively. Such settlements may be found in the Vindhya plateau region and the paddy regions of Bihar and Uttar Pradesh.

Because of benefits like as social connection, resource sharing, effective land use, and faster supply of services and infrastructure, nucleated communities are the most frequent kind globally.

Learn more about nucleated settlements at:

https://brainly.com/question/19958339

#SPJ1

Answer:A nucleated village, also known as a clustered settlement, is one of the most common forms of settlement design. Geographers and landscape historians use this phrase to categorize settlements.

In India, nucleated villages are mainly found in areas where agriculture is practiced extensively. Such settlements may be found in the Vindhya plateau region and the paddy regions of Bihar and Uttar Pradesh.

Because of benefits like as social connection, resource sharing, effective land use, and faster supply of services and infrastructure, nucleated communities are the most frequent kind globally.

Explanation:

The most recent IPCC AR5 *Summary for policy makers" stated that the warming of the climate system is unequivocal, and
since the 1950s, many of the observed changes are unprecedented over decades to millennia' OA. True
C B. False

Answers

The statement is true.

The most recent IPCC AR5 (Intergovernmental Panel on Climate Change Fifth Assessment Report) Summary for Policymakers stated that the warming of the climate system is unequivocal, and many of the observed changes since the 1950s are unprecedented over decades to millennia. This conclusion is based on extensive scientific evidence and analysis of global climate data. The report highlights the significant impact of human activities, particularly the increase in greenhouse gas emissions, on the Earth's climate system. The findings emphasize the need for urgent action to mitigate climate change and adapt to its impacts.

Learn more about Policymakers visit:

brainly.com/question/30235859

#SPJ11

the is a measure of hurricane strength based on winds, while the is a measure of tornado strength based on damage estimates.

Answers

The measure of hurricane strength is typically based on wind speed, as hurricanes are massive storms with sustained winds that can reach speeds of over 74 mph. The Saffir-Simpson Hurricane Wind Scale is commonly used to categorize hurricanes by their wind speeds, ranging from Category 1 with winds of 74-95 mph to Category 5 with winds over 157 mph. The wind speed is a critical factor in determining the potential damage a hurricane can cause, as it can uproot trees, damage buildings, and even cause catastrophic flooding.


The measure of hurricane strength is typically based on wind speed, as hurricanes are massive storms with sustained winds that can reach speeds of over 74 mph. The Saffir-Simpson Hurricane Wind Scale is commonly used to categorize hurricanes by their wind speeds, ranging from Category 1 with winds of 74-95 mph to Category 5 with winds over 157 mph. The wind speed is a critical factor in determining the potential damage a hurricane can cause, as it can uproot trees, damage buildings, and even cause catastrophic flooding.

On the other hand, the measure of tornado strength is typically based on damage estimates rather than wind speed. The Enhanced Fujita Scale is used to categorize tornadoes based on the damage they cause, ranging from EF0 with winds of 65-85 mph to EF5 with winds over 200 mph. Tornadoes are smaller in scale than hurricanes, and their wind speeds are more difficult to measure accurately as they can vary greatly within a small area.

In summary, while wind speed is the primary factor in measuring hurricane strength, tornado strength is measured by the damage it causes. Both hurricanes and tornadoes can be incredibly destructive forces of nature, and it is important to be aware of their potential impact and take necessary precautions to stay safe.

To know more about catastrophic visit:

https://brainly.com/question/29694143

#SPJ11

Provide a 100 words paragraph approximate, explaining your
general strategy for each one of the cycling periods and for each
one of the Revsim tabs.
Your document should show 4 cycling periods, eac

Answers

For each of the four cycling periods and Revsim tabs, the general strategy revolves around analyzing and optimizing performance.

During the first period, I focus on gathering data and setting baseline metrics. This helps in identifying areas of improvement. In the second period, I analyze the data to understand patterns, trends, and areas of inefficiency. This analysis guides the strategy for the third period, where I implement targeted optimizations to enhance performance. Finally, in the fourth period, I evaluate the impact of the optimizations and make further adjustments if necessary.

For each Revsim tab, the strategy involves a systematic approach. In the first tab, I review the overall performance metrics and identify any major issues or bottlenecks. The second tab allows me to delve into specific details and uncover insights into the underlying factors affecting performance. In the third tab, I focus on fine-tuning specific aspects such as resource allocation and configuration.

Learn more about cycling period here:

https://brainly.com/question/28620547

#SPJ11

what immigrants travel in small multi-family groups called kumpania

Answers

The immigrants who travel in small multi-family groups called kumpania are typically Romani people, also known as Roma or Gypsies.

Kumpania refers to a social unit or extended family structure within the Romani community. Romani people have a long history of migration and often travel together in kumpanias, which provide support, kinship ties, and cultural preservation. These small groups may move from place to place, maintaining their cultural traditions, language, and communal way of life. The kumpania system serves as a way for Romani immigrants to maintain their identity and support each other during their travels and settlement in different locations.

Learn more about culture here:

brainly.com/question/27398924

#SPJ11

Which of the following materials or processes contribute to the formation of a soil profile? (Select all that apply.)
a) Mechanical weathering
b) Chemical weathering
c) Decayed organic remains
d) Rock fragments

Answers

The materials and processes that contribute to the formation of a soil profile include mechanical weathering, chemical weathering, decayed organic remains, and rock fragments. Mechanical weathering is the process of physical breakdown of rocks into smaller pieces due to various forces such as temperature changes, abrasion, and frost action. This results in the formation of rock fragments that contribute to the soil profile. Chemical weathering, on the other hand, is the breakdown of rocks through chemical reactions. This process alters the chemical composition of the rocks and minerals, leading to the formation of soil.

The materials and processes that contribute to the formation of a soil profile include mechanical weathering, chemical weathering, decayed organic remains, and rock fragments. Mechanical weathering is the process of physical breakdown of rocks into smaller pieces due to various forces such as temperature changes, abrasion, and frost action. This results in the formation of rock fragments that contribute to the soil profile. Chemical weathering, on the other hand, is the breakdown of rocks through chemical reactions. This process alters the chemical composition of the rocks and minerals, leading to the formation of soil. Decayed organic remains such as leaves, twigs, and animal remains also contribute to the formation of soil by adding organic matter that enhances soil fertility. Therefore, all of the options - mechanical weathering, chemical weathering, decayed organic remains, and rock fragments - contribute to the formation of a soil profile.

To know more about weathering visit:

https://brainly.com/question/29616569

#SPJ11

The earliest Mayan pottery found at Colha, in Belize, is about 3,000 years old. Recently, however, 4,500-year-old stone agricultural implements were unearthed at Colha. These implements resemble Mayan stone implements of a much later period, also found at Colha. Moreover, the implements’ designs are strikingly different from the designs of stone implements produced by other cultures known to have inhabited the area in prehistoric times. Therefore, there were surely Mayan settlements in Colha 4,500 years ago.
Which of the following, if true, most seriously weakens the argument?
(A) Ceramic ware is not known to have been used by the Mayan people to make agricultural implements.
(B) Carbon-dating of corn pollen in Colha indicates that agriculture began there around 4,500 years ago.
(C) Archaeological evidence indicates that some of the oldest stone implements found at Colha were used to cut away vegetation after controlled burning of trees to open areas of swampland for cultivation.
(D) Successor cultures at a given site often adopt the style of agricultural implements used by earlier inhabitants of the same site.
(E) Many religious and social institutions of the Mayan people who inhabited Colha 3,000 years ago relied on a highly developed system of agricultural symbols.

Answers

The option that weakens the argument is (B) Carbon-dating of corn pollen in Colha indicates that agriculture began there around 4,500 years ago. This evidence suggests that the stone agricultural implements found at Colha could have been used by a different culture that inhabited the area before the Mayans. The presence of Mayan pottery does not necessarily prove that the stone implements were made by the Mayans. Option (A) is irrelevant since the argument does not claim that the Mayans used ceramic ware to make agricultural implements. Option (C) supports the argument by providing evidence of the use of stone implements for agriculture in Colha. Option (D) does not weaken the argument since it suggests that later cultures may have adopted the style of earlier inhabitants, which could include the Mayans.

The option that weakens the argument is (B) Carbon-dating of corn pollen in Colha indicates that agriculture began there around 4,500 years ago. This evidence suggests that the stone agricultural implements found at Colha could have been used by a different culture that inhabited the area before the Mayans. The presence of Mayan pottery does not necessarily prove that the stone implements were made by the Mayans. Option (A) is irrelevant since the argument does not claim that the Mayans used ceramic ware to make agricultural implements. Option (C) supports the argument by providing evidence of the use of stone implements for agriculture in Colha. Option (D) does not weaken the argument since it suggests that later cultures may have adopted the style of earlier inhabitants, which could include the Mayans. Option (E) is also irrelevant since it does not address the origin of the stone implements found at Colha.

To know more about Colha visit:

https://brainly.com/question/26314004

#SPJ11

A sample of sand is sieved and 10% of the sample has grain sizes that are finer than 0.0002 m. If the Hazen coefficient is 118, what is the hydraulic conductivity in m/d from the Hazen method?

Answers

The hydraulic conductivity of the sand sample is estimated to be 11.8 meters per day (m/d).

To calculate the hydraulic conductivity using the Hazen method, we can use the formula:

Hydraulic conductivity (K) = (Hazen coefficient) × (percentage of grains finer than a specific size)

In this case, the Hazen coefficient is given as 118, and the percentage of grains finer than 0.0002 m is 10%.

Therefore, the hydraulic conductivity can be calculated as:

K = 118 × 0.10

K = 11.8 m/d

Thus, based on the given information and the Hazen method, the hydraulic conductivity of the sand sample is estimated to be 11.8 meters per day (m/d).

Learn more about hydraulic conductivity here:

brainly.com/question/23996718

#SPJ11

of the following types of organisms, which are examples of microscopic algae? (select all that apply.)
a) dinoflagellates
b) coccolithophores
c) diatoms

Answers

All three options listed (dinoflagellates, coccolithophores, and diatoms) are examples of microscopic algae.

These organisms are all photosynthetic, meaning they use sunlight to produce their own food. Dinoflagellates are characterized by their two flagella, which they use to swim through the water. They can be found in both marine and freshwater environments and are an important part of the marine food web. Coccolithophores are a type of phytoplankton that produce small plates made of calcium carbonate. These plates can reflect light, giving the water a milky appearance. Diatoms are a type of algae that have a hard, silica-based shell. They are found in both freshwater and marine environments and are an important source of food for many aquatic organisms. Overall, microscopic algae play an important role in aquatic ecosystems, serving as the base of the food chain for many organisms.

To know more about microscopic algae visit:

https://brainly.com/question/32350654

#SPJ11

Working as a Remote Sensing specialist for the Department of Agriculture Forestry and Fisheries, you are tasked with mapping early stages of pest infestation on commercial eucalyptus forest plantations. You are informed that the short-lived outbreak occurs in the upper crown of the vegetation (roughly 2.5 m in diameter), affecting certain trees more than others. Using this information, you provide the Department with a proposal highlighting your procurement strategy in obtaining the digital data from a supplier. This would entail comparing the resolutions of the WorldView-2 and LandSat-8 sensors, highlighting the
reasons for selecting one sensor for your proposed study over the others

Answers

In my proposal as a Remote Sensing specialist for the Department of Agriculture Forestry and Fisheries, the WorldView-2 sensor for mapping the early stages of pest infestation on commercial eucalyptus forest plantations.

The WorldView-2 sensor offers higher spatial resolution compared to Landsat-8, which is crucial for accurately detecting and mapping the small-scale infestation in the upper crown of the vegetation. With a spatial resolution of 0.5 meters, the WorldView-2 sensor can provide detailed imagery that allows for precise identification and delineation of affected trees, even at the individual tree level.

By selecting the WorldView-2 sensor, we can obtain high-resolution imagery that enables precise mapping and monitoring of the early stages of pest infestation on commercial eucalyptus forest plantations, particularly in the upper crown area. This will facilitate timely intervention and management strategies to mitigate the impact of the infestation.

Learn more about agriculture forestry here:

https://brainly.com/question/31627047

#SPJ11

describe the two types of volcanic outcrops discussed in the video by sorting their characteristics. answer instruction: drag the appropriate items into their respective bins. each item may be used only once.

Answers

I'll provide you with a brief description of two common types of volcanic outcrops and their characteristics. You can then use this information to complete the task in your video.


1. Basaltic Outcrops: These volcanic outcrops are formed from basalt, a dark, fine-grained igneous rock. They typically result from low-viscosity lava flows, allowing the lava to spread out and create wide, thin layers. Basaltic outcrops are commonly found at divergent boundaries and hotspots.
Characteristics:
- Dark-colored rock
- Fine-grained texture
- Low-viscosity lava flows
- Wide, thin layers
- Associated with divergent boundaries and hotspots
2. Rhyolitic Outcrops: These volcanic outcrops are formed from rhyolite, a light-colored, high-silica igneous rock. Rhyolitic outcrops are often the result of high-viscosity lava flows, leading to the formation of thicker, more viscous layers. These outcrops are typically found at convergent boundaries and within continental crust.
Characteristics:
- Light-colored rock
- High-silica content
- High-viscosity lava flows
- Thicker, more viscous layers
- Associated with convergent boundaries and continental crust
To know more about volcanic outcrops visit:

https://brainly.com/question/2599018

#SPJ11

________ often initiates mass wasting in subarctic and high latitudes.
A) The heaving of frozen groundwater
B) Short day lengths
C) Heavy snow
D) Cold temperatures
E) Greater gravity nearer the poles

Answers

The factor that often initiates mass wasting in subarctic and high latitudes is A) The heaving of frozen groundwater.

In these regions, the ground often experiences freeze-thaw cycles, causing the water in the soil to freeze and expand. This process, known as frost heaving, can destabilize the soil and trigger mass wasting events such as landslides and rockfalls. Cold temperatures, heavy snow, and short day lengths can contribute to these conditions, but they do not directly initiate mass wasting. Greater gravity near the poles is not a significant factor in causing mass wasting.

To know more about groundwater visit:

https://brainly.com/question/13160768

#SPJ11

russian territorial expansion into northern eurasia began in the

Answers

Russian territorial expansion into northern Eurasia began in the 16th century.

During this period, known as the Tsardom of Russia, Russian explorers and traders gradually expanded the boundaries of the Russian state into the vast territories of Siberia and the Far East. The conquest and colonization of Siberia began in the late 16th century under the rule of Tsar Ivan the Terrible and continued through subsequent tsars and rulers. The Russian expansion into northern Eurasia was driven by various factors, including the desire for natural resources such as furs, the establishment of trade routes, and the quest for geopolitical dominance in the region.

Learn more about Eurasia here:

brainly.com/question/30310588

#SPJ11

why do you suppose casualty rates in indonesia were so high for this particular tsunami

Answers

The high casualty rates in Indonesia for this particular tsunami can be attributed to several factors:

1. Proximity to the Epicenter: Indonesia is located along the Ring of Fire, a seismically active region in the Pacific Ocean. The tsunami was triggered by a powerful undersea earthquake near the coast of Indonesia, resulting in the tsunami waves reaching the affected areas quickly and with significant force.

2. Population Density and Coastal Vulnerability: Many densely populated areas in Indonesia are situated along the coastline, making them more susceptible to the impact of tsunamis. The high population density, combined with inadequate infrastructure and limited early warning systems in some areas, may have contributed to a lack of preparedness and slower evacuation processes.

3. Lack of Timely Warning Systems: While Indonesia has made efforts to establish early warning systems for tsunamis, the effectiveness and coverage of these systems may have been limited in certain regions. The short time interval between the earthquake and the arrival of the tsunami waves may have left little time for adequate warning and evacuation.

4. Geological Factors: The coastal geography of Indonesia, with its complex coastline, narrow bays, and narrow straits, can amplify the height and impact of tsunami waves. These geological factors can channel and concentrate the energy of the tsunami, causing more extensive damage and higher casualty rates.

5. Socioeconomic Challenges: Indonesia, being a developing country with diverse socioeconomic conditions, may face challenges in terms of infrastructure development, disaster preparedness, and response capabilities. Limited resources and access to timely information could have hampered effective evacuation and emergency response efforts.

Learn more about tsunami hazards here:

https://brainly.com/question/7054782

#SPJ11

Click on one of the 6 "Biomes of the World" Choose one topic from the left column. Write
3 sentences describing the information in this topic.

Answers

The most comprehensive term used by scientists to classify geographical ecology areas on the planet with similar traits is a biome. There are numerous different kinds of biomes, including tundra, grasslands, coniferous woods, deserts, and shrubland.

The term "biome" refers to a biogeographical unit that consists of a biological community that has developed in response to its physical surroundings and a common local climate. Multiple continents may include different biomes. The term "biome" encompasses a wider range of environments than "habitat." Because they give researchers insight into a given plant or animal's place in its community and the adaptations it has made to a particular environment, biomes are essential to our understanding of ecology.

Learn more about Biome here:

https://brainly.com/question/30256754

#SPJ1

Explain the Bedford lebel experiment

Answers

The Bedford Level experiment was conducted to measure the curvature of the Earth.

The Bedford-level experiment was conducted during the late 19th and early 20th centuries. This was conducted along the 6-mile length of the Old Bedford River in the United Kingdom. The two major researchers at work here were - Samuel Birley Rowbotham and Alfred Russell Wallace.

During the earlier stages of the experimentation, the Earth was found to be flat, later it was realized that the curvature of the Earth pointed towards a spherical Earth. This experimentation was started in 1838 with a boat and a flag on top of it to understand the angle of flow in the river as the boat was sailed. This was done using a telescope held 8 inches above the water level.

The results so obtained could also be observed during atmospheric refraction. This can be observed as the light rays travel horizontally and vertically to reach the Earth's Surface. These results were used to prove the spherical shape of the Earth.

Learn more about the Spherical shape of Earth -

https://brainly.com/question/1085936

TRUE / FALSE. orthoclase and plagioclase feldspars have quite different forms of cleavage.

Answers

True. Orthoclase and plagioclase feldspars exhibit different forms of cleavage. Orthoclase feldspar typically displays a characteristic two-directional cleavage at right angles, forming rectangular or square-shaped fragments.

This cleavage is known as "perpendicular" or "right-angled" cleavage. On the other hand, plagioclase feldspar showcases a more inclined cleavage, often forming oblique angles or irregular shapes. This cleavage is referred to as "oblique" or "inclined" cleavage. These variations in cleavage angles and shapes are useful in distinguishing between orthoclase and plagioclase feldspars in mineral identification.

Learn more about plagioclase feldspar here:

https://brainly.com/question/4315973

#SPJ11

geologists distinguish among different types of mass wasting based on factors such as the of the moving material and the rate of movement.

Answers

Geologists study various types of mass wasting, which refer to the movement of rock, soil, and other materials down a slope or cliff. The movement can be triggered by various factors, such as earthquakes, heavy rainfall, or human activities.

Geologists use different criteria to classify mass wasting events based on the type of material involved, the speed and direction of movement, and the slope gradient. For example, rockfalls involve the rapid movement of rocks that detach from a cliff face and fall to the ground. On the other hand, landslides involve the gradual or sudden movement of soil and rock down a slope. Mudflows, debris flows, and avalanches are other types of mass wasting events that geologists study. Understanding the factors that contribute to mass wasting can help prevent disasters and protect human lives and infrastructure in areas prone to such events.

To know more about Geologists visit:

https://brainly.com/question/13428729

#SPJ11

The most tectonically active (earthquakes and volcanoes) area in North and South America is found ____________. Group of answer choices a. In the middle of the continent b. On the southern Coast c. On the east Coast d. On the west Coast

Answers

The most tectonically active area in North and South America is found on the (d) west coast. The Pacific Ring of Fire, which encircles the Pacific Ocean, extends along the western coasts of North and South America. This region is characterized by intense tectonic activity, including frequent earthquakes and volcanic eruptions.

The west coast of both continents is part of the Pacific Plate boundary, where several tectonic plates interact. The movement and interaction of these plates lead to the formation of subduction zones, where one tectonic plate is forced beneath another, resulting in volcanic activity and seismic events.

Notable examples of tectonic activity on the west coast include the subduction zone off the coast of Chile, which is associated with powerful earthquakes, as well as the presence of the Cascade Range volcanoes in the western United States and Canada.

Learn more about the tectonic activity here:

https://brainly.com/question/1129241

#SPJ11

Supplies of potable freshwater are in short supply in many parts of the world because of pollution of lakes and rivers. irrigation uses all of the freshwater is many areas. of salt water intrusion. None of these are correct.

Answers

None of these are correct. While pollution of lakes and rivers, excessive irrigation, and saltwater intrusion can contribute to water scarcity in specific regions, they are not the sole reasons for the shortage of potable freshwater worldwide.

The main factors leading to water scarcity include population growth, climate change, inefficient water management practices, inadequate infrastructure, and unequal distribution of water resources. These factors, combined with natural variations in rainfall patterns and increased water demands for various sectors, contribute to the global challenge of limited supplies of potable freshwater.

Learn more about the causes of water scarcity here:

https://brainly.com/question/19920929

#SPJ11

the abundance of elements in different layers of the earth's crust is determined by the preference of rocks for certain elements

Answers

The abundance of elements in different layers of the Earth's crust is determined by a number of factors, including the preference of rocks for certain elements. Rocks can have different chemical compositions, and some may have a greater affinity for certain elements than others. This can lead to variations in the concentration of elements in different layers of the Earth's crust.

The abundance of elements in different layers of the Earth's crust is determined by a number of factors, including the preference of rocks for certain elements. Rocks can have different chemical compositions, and some may have a greater affinity for certain elements than others. This can lead to variations in the concentration of elements in different layers of the Earth's crust.

For example, certain types of igneous rocks, such as granites, are known to have high concentrations of elements such as potassium, uranium, and thorium. These elements are often found in higher concentrations in the uppermost layer of the Earth's crust, known as the continental crust. In contrast, the oceanic crust, which is largely composed of basaltic rocks, tends to have lower concentrations of these elements.

Other factors can also influence the abundance of elements in different layers of the Earth's crust, including geological processes such as weathering, erosion, and volcanic activity. Additionally, human activities such as mining and pollution can have a significant impact on the concentration of elements in the Earth's crust.

Overall, the distribution of elements in the Earth's crust is a complex and dynamic process that is influenced by a variety of factors. Understanding these factors is important for a range of scientific and practical applications, from geology and mineral exploration to environmental management and resource planning.

To know more about abundance visit:

https://brainly.com/question/2088613

#SPJ11

The description of assimilation patterns in the passage (final paragraph) suggests that there is geographic variation in which pair of concepts?
A. Social status and roles
B. Social and cultural capital
C. Cultural values and norms
D. Material and symbolic culture

Answers

The passage in the final paragraph describes assimilation patterns, which refers to the process by which individuals or groups adopt the cultural norms, values, and behaviors of the dominant society. The passage suggests that there is geographic variation in the degree to which social and cultural capital are necessary for successful assimilation. Social capital refers to the resources and connections that individuals have in a given society, while cultural capital refers to the knowledge and skills that individuals possess in relation to the dominant culture. In some geographic areas, social capital may be more important for assimilation, while in others, cultural capital may be more important

B. Social and cultural capital.

The passage in the final paragraph describes assimilation patterns, which refers to the process by which individuals or groups adopt the cultural norms, values, and behaviors of the dominant society. The passage suggests that there is geographic variation in the degree to which social and cultural capital are necessary for successful assimilation. Social capital refers to the resources and connections that individuals have in a given society, while cultural capital refers to the knowledge and skills that individuals possess in relation to the dominant culture. In some geographic areas, social capital may be more important for assimilation, while in others, cultural capital may be more important. This variation may be influenced by factors such as the level of diversity in a given area, the availability of social networks and support systems, and the level of exposure to and familiarity with the dominant culture.

To know more about assimilation visit:

https://brainly.com/question/8947259

#SPJ11

The highest numbered latitude used in the geographic grid is ___ degrees. a. 365 b. 90 c. 100 d. 180 e. 360.

Answers

Answer:

Its correct answer is option d that is 180

The correct answer to the question is b. 90. The geographic grid is a system of imaginary lines that intersect at right angles to create a reference system for locating points on the Earth's surface.

It includes lines of latitude and longitude, which are measured in degrees. Lines of latitude run horizontally around the Earth and are used to measure the distance north or south of the equator, which is at 0 degrees latitude. The highest numbered latitude used in the geographic grid is 90 degrees, which represents the North Pole. This means that any location north of the equator will have a latitude between 0 and 90 degrees, while any location south of the equator will have a latitude between 0 and -90 degrees. In conclusion, the highest numbered latitude used in the geographic grid is 90 degrees.

To know more about geographic grid visit:

https://brainly.com/question/32271928

#SPJ11

The following reservoirs contain varying amounts of carbon. Rank them from the smallest reservoir (contains the least carbon) to the largest reservoir (contains the most carbon).
Fossil fuels
atmosphere, earths crust, oceans

Answers

Ranking: Atmosphere < Earth's crust < Oceans < Fossil fuels. Ranking the reservoirs from the smallest to the largest amount of carbon:

1. Atmosphere: The atmosphere contains a relatively small amount of carbon compared to the other reservoirs. While carbon dioxide is present in the atmosphere, its concentration is relatively low compared to the other reservoirs.

2. Earth's crust: The carbon stored in the Earth's crust, primarily in the form of carbonate rocks and minerals, is larger in quantity compared to the atmosphere but smaller compared to the remaining reservoir.

3. Oceans: The oceans store a significant amount of carbon, primarily in the form of dissolved carbon dioxide and carbonate ions. The vast volume of the oceans allows them to contain a substantial carbon reservoir.

4. Fossil fuels: Fossil fuels, such as coal, oil, and natural gas, represent the largest reservoir of carbon. These fuels are derived from ancient organic matter that accumulated and underwent geological processes over millions of years.

Learn more about carbon reservoirs here:

https://brainly.com/question/29462924

#SPJ11

Read the contents and policies of the Republic Act 9003, "Ecological Solid Waste Management Act of 2000, and Waste Analysis Characterization Study articles, then answer the questions below.
What is Waste Analysis Characterization Study?
What is the impact of the Integrated Solid Waste Management Plan in conducting WACS?
Identify the person responsible for conducting WACS and discuss its function.
Discuss the stages in carrying out WACS.
Classify the materials needed before conducting WACS.
What can you conclude from what you have read?

Answers

The Waste Analysis  and Characterization Study (WACS) was described in RA 9003, is an essential activity that helps to estimate how much garbage is produced by a municipality or any other type of institution.

The act's provision for an ecological solid waste management program that must ensure adequate segregation, collection, transport, and storage has an influence on how WACS is conducted.

The employer is in charge of carrying out WACS. Independent contractors who decide how the task will be carried out and how the desired outcome will be attained.

Pre-WACS activities, a five-day Waste Characterization Study, and data consolidation and analysis make up the three (3) steps of the WACS process.

The materials required prior to executing WACS are Nonhazardous Solid Waste, Hazardous Waste, Asbestos Containing Wastes, and Liquids or Semi-Solid Wastes.

The conclusion is that by returning to a significant location or reintroducing a significant character, the ending serves to remind readers of the beginning in the WACS.

Learn more about the WACS, refer to:

https://brainly.com/question/30712521

#SPJ4

karst terrain could form in areas where the sedimentary rock _____is prevalent because the rock contains the mineral .

Answers

Karst terrain is a type of topography that is characterized by the presence of caves, sinkholes, and underground drainage systems. It is formed as a result of the dissolution of soluble rocks, such as limestone and dolomite, by acidic groundwater. In areas where the sedimentary rock is prevalent, karst terrain could form if the rock contains the mineral calcite.

Karst terrain is a type of topography that is characterized by the presence of caves, sinkholes, and underground drainage systems. It is formed as a result of the dissolution of soluble rocks, such as limestone and dolomite, by acidic groundwater. In areas where the sedimentary rock is prevalent, karst terrain could form if the rock contains the mineral calcite. Calcite is a mineral that is found in many sedimentary rocks, particularly limestone. It is highly soluble in acidic water and can dissolve rapidly, leading to the formation of caves and other karst features. The dissolution of calcite also leads to the formation of underground drainage systems, which can result in sinkholes and other surface features. Therefore, the presence of calcite in sedimentary rocks is an important factor in the formation of karst terrain.

To know more about topography visit:

https://brainly.com/question/15924652

#SPJ11

________ are preferentially preserved more often than other ossified tissues because they are typically composed of dense, compact bone.

Answers

Teeth are preferentially preserved more often than other ossified tissues because they are typically composed of dense, compact bone.

The enamel, dentin, and cementum that make up teeth are highly mineralized and resistant to decay and decomposition. This mineralized structure helps teeth withstand the processes of fossilization, such as mineral replacement and permineralization, better than other bones or soft tissues. Due to their durability, teeth have a higher chance of being preserved in the fossil record, providing valuable information about ancient organisms, their diets, and their evolutionary relationships.

Learn more about preservation of teeth here:

https://brainly.com/question/31379831

#SPJ11

(03.02 hc)compare and contrast open, closed, and isolated systems. be sure to discuss the exchange of energy and exchange of matter, and provide at least one example of each.

Answers

Open systems, closed systems, and isolated systems differ in terms of their exchange of energy and matter.

Open systems are characterized by the exchange of both energy and matter with their surroundings. They allow for the flow of energy and the transfer of matter across their boundaries. An example of an open system is a living organism, such as a plant, which exchanges energy with the environment through photosynthesis and takes in nutrients and releases waste products.

Closed systems, on the other hand, allow for the exchange of energy but not matter with their surroundings. Energy can enter or leave the system, but matter remains within the system. A pot of boiling water with a lid can serve as an example of a closed system. Heat energy can enter or exit the system, but no matter (water or steam) escapes or enters.

Isolated systems do not allow for the exchange of either energy or matter with their surroundings. These systems are completely self-contained. The universe as a whole is often considered an example of an isolated system, as it is not influenced by external factors and does not exchange energy or matter with anything outside its boundaries.

Learn more about energy and matter

https://brainly.com/question/28856450

#SPJ4

Other Questions
Which best explains Abraham Lincoln's selection of Andrew Johnson as his running mate in the 1864 election? O Lincoln wanted Andrew Johnson to become president of the United States upon his death. O Lincoln wanted someone to help him free the slaves. O Lincoln wanted a Radical Republican as his vice president. O Lincoln wanted to "balance the ticket" in order to gain more widespread support during his campaign. our college newspaper, The Collegiate Investigator,sells for 90 per copy. The cost of producing x copies ofan edition is given byC(x) = 60 + 0.10x + 0.001x2 dollars.(a) Calculate the marginal re will only upvote if correct and fast2) A curve is described by the parametric equations x=t +2t and y=t+t. An equation of the line tangent to the curve at the point determined by t = 1 is a) 4x - 5y = 2 b) 4x - y = 10 c) 5x - 4y = 7 Identify and explain 3 similarities in Nazi rule in Germany and the rule of authoritarian ultranationalist in Japan. Identify and explain 1 diff. 14. [-70.5 Points] DETAILS SCALCET9 3.6.018. MY NOTES ASK YOUR TEACHER Differentiate the function. t(t2 + 1) 8 g(t) = Inl V 2t - 1 g'(t) = x + y +16x + 4 = 14y+35; area Calibration of dental x-ray equipment can be performed by the dentist, dental hygienist, or dental assistant.a. Trueb. False Consider the following.x = sin(2t), y = cos(2t), z = 8t; (0, 1, 4)Find the equation of the normal plane of the curve at the given point. when companies try to create faux-viral videos or make fake grassroots blogs, the practice is called We will investigate 3 different object positions for a diverging lens: inside, at and outside the focal length. We will use the same object positions used above, but with a diverging lens (f will be negative). Verify that the image is always virtual for diverging lenses.5. Using the magnification equation, what will be the objects magnification, M, given the p and q from above? Is the object upright (M positive) or inverted (M is negative)?6. Run the simulation. Set the lens type to diverging with a focal length of -50 cm. Place the object at a distance of 50 cm and a height of 25 cm. Compare the image sign and distance to that computed above. Does the height and direction of the image agree with your magnification computations? Comment below.7. Using the thins lens equation, for p = +80 and f = -50, what will be the image sign and location? Show your work here.8. What will be the objects magnification, M, given the p and q from above? Is the object upright (M positive) or inverted (M is negative)? See note above. During the current year, Crane Corporation expects to produce 10,000 units and has budgeted the following: net income $312.000: variable costs $936,000; and fixed costs $364,000. It's investment in assets is $1,820,000. The company's budgeted ROI is 15%. What is its budgeted markup percentage using the full-cost approach? FILL THE BLANK. the missing product in this reaction combines with oxygen to form a compound with the formula __________. which of the following statement(s) are true about the bonding in ccl4A. The C-Cl bonds are ionic, and it is ionic.B. It has polar covalent bonds, and it is nonpolar.C. It has covalent bonds, and it is nonpolar.D. It has polar covalent bonds, and it is polar.E. It has covalent bonds, and it is polar. Find all values of a, b, and c for which A is symmetric. -1 a 2b + 2C 2a + b + c A = -4 -1 a + c 5 -5 -3 a = i -14 b= i C= Use the symbol t as a parameter if needed. A digital computer has a memory unit with 32 bits per word. The instruction set consists of 110 different operations. All instructions have an operation code part (opcode) and two address fields: one for a memory address and one for a register address. This particular system includes eight general-purpose, user-addressable registers. Registers may be loaded directly from memory, and memory may be updated directly from the registers. Direct memory-to-memory data movement operations are not supported. Each instruction stored in one word of memory. e) What is the largest unsigned binary number that can be accommodated in one word of memory? [Problem 2] [10 points]. Marvel Corporation (a C-corporation) has the following operating profit for 2019 through 2021. 2019 2020 2021 Year Operating profit ($60,000) $30,000 $50,000 Assume the margin What is the value of the sum $2^{-1} 2^{-2} 2^{-3} \cdots 2^{-9} 2^{-10}$? Give your answer as a simple fraction.a. 1/1024b. 1/512c. 1/256d. 1/128 why do multinational companies hire people from other countries to make their goods and provide their services? choose correct answer only NO NEED FOR STEPS ASAPPPPA power series representation of the function 1 X+1 is given by None of the others. 4 n = 0 O (-1)"x4 n=1 O (-1)"(x+4)" n=0 The narrator feels ashamed when the soldiers launch their raid on the village. Why? Examine the root causes of Estebanico's feelings. What does he have in common with the soldiers? And the villagersWhich group does he feel more a part of and why?