Answer:
First, we need to determine the limiting reactant in the reaction. We can do this by calculating the amount of CO2 that would be produced by each reactant and comparing them.
For C2H6:
Molar mass of C2H6 = 2(12.01 g/mol) + 6(1.01 g/mol) = 30.07 g/mol
Moles of C2H6 = 18.6 g / 30.07 g/mol = 0.619 mol
Moles of CO2 produced = 4 mol CO2 / 2 mol C2H6 * 0.619 mol C2H6 = 1.238 mol CO2
Mass of CO2 produced = 1.238 mol CO2 * 44.01 g/mol = 54.4 g
For O2:
Molar mass of O2 = 2(16.00 g/mol) = 32.00 g/mol
Moles of O2 = 69.2 g / 32.00 g/mol = 2.1625 mol
Moles of CO2 produced = 7 mol CO2 / 2 mol O2 * 2.1625 mol O2 = 7.5708 mol CO2
Mass of CO2 produced = 7.5708 mol CO2 * 44.01 g/mol = 333.5 g
Since the amount of CO2 produced by C2H6 is less than the amount produced by O2, C2H6 is the limiting reactant. Therefore, we can use the amount of C2H6 to determine the amount of H2O produced.
Moles of H2O produced = 6 mol H2O / 2 mol C2H6 * 0.619 mol C2H6 = 1.857 mol H2O
Mass of H2O produced = 1.857 mol H2O * 18.02 g/mol = 33.5 g
Therefore, 33.5 g of steam (H2O) is produced in the combustion reaction.
Mark answer as Brainliest!!
which of the following statements is true for real gases? choose all that apply. the volume occupied by the molecules can cause an increase in pressure compared to the ideal gas. as attractive forces between molecules increase, deviations from ideal behavior become more apparent at relatively high temperatures. attractive forces between molecules cause an increase in pressure compared to the ideal gas. as molecules increase in size, deviations from ideal behavior become more apparent at relatively high pressures.
True statements for real gases are:
Option a): The volume occupied by the molecules can cause an increase in pressure compared to the ideal gasOption b): As attractive forces between molecules increase, deviations from ideal behavior become more apparent at relatively high temperaturesReal gases are gases that do not behave perfectly like ideal gases at all conditions of temperature and pressure. They deviate from ideal behavior under certain conditions, especially at high pressures and low temperatures.
The assumptions of the Kinetic Theory of Gases that make gases to be called ideal gases are not valid under all conditions of temperature and pressure. However, ideal gases serve as a reference point for understanding the behavior of real gases. The molecules of a real gas do occupy some space and have some volume. Therefore, they will cause an increase in pressure compared to ideal gases.
The attractive forces between the molecules of a real gas cause a decrease in the volume of the gas compared to the ideal gas. This results in an increase in pressure.Therefore, statement a is true.
Attractive forces between the molecules of gas become more significant as the temperature is decreased. This will result in deviations from ideal behavior. The attractive forces between the molecules cause them to stay close to each other. Therefore, the size of the molecules is more apparent at high pressures. Thus, statement b is true.
Learn more about real gases at https://brainly.com/question/12779297
#SPJ11
a solution made up of 40% alcohol by volume is mixed with 4 liters of solution that is 10% alcohol by volume. how much, in liters, of the 40% alcoholic solution is needed to make a mixture that is 25% alcohol by volume?
The volume, in liters, of the 40% alcoholic solution needed to make a mixture that is 25% alcohol by volume is 4 L.
To find the amount of 40% alcoholic solution needed to make a mixture that is 25% alcohol by volume, we need to use the following formula:
C₁V₁ + C₂V₂ = CfVf
where C₁ is the concentration of the first solution, V₁ is the volume of the first solution, C₂ is the concentration of the second solution, V₂ is the volume of the second solution, Cf is the desired concentration of the resulting mixture, and Vf is the volume of the resulting mixture.
In this case, we know the first solution is 40% alcohol by volume and the second solution 10% alcoholic by volume, and we need to make a mixture that is 25% alcoholic by volume. We need to know the volume of the first solution, V₁.
Plugging in the values, we get:
C₁V₁ + C₂V₂ = CfVf
0.40V₁ + (0.10)(4) = (0.25)(4 + V₁ )
Solving for the value of V₁, we get:
0.40V₁ + 0.40 = 1 + 0.25V₁
0.15V₁ = 0.60
V₁ = 4
Therefore, 4 liters of the first solution is needed.
Learn more about mixture here: https://brainly.com/question/11868977
#SPJ11
what quality is conserved in the reaction below?
- Atoms
- Molecules
- Moles
- Mass (grams)
molecules
B.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
Which statement best compares the energy and frequency of green waves to orange waves?
Green waves have a lower frequency and contain less energy than orange waves.
Green waves have a higher frequency and contain more energy than orange waves.
Orange waves have a higher frequency and contain less energy than green waves.
Orange waves have a lower frequency and contain more energy than green waves.
Orange waves have a lower frequency and contain less energy than green waves.
What is Wave?
A wave is a disturbance or oscillation that travels through space and time, accompanied by the transfer of energy without the transfer of matter. Waves can take many different forms, including sound waves, light waves, water waves, and seismic waves. They can be described in terms of their frequency, wavelength, amplitude, and velocity, among other properties. Waves play a fundamental role in many areas of science and technology, including communication, medicine, and engineering.
The energy of a wave is directly proportional to its frequency, which means that higher frequency waves contain more energy than lower frequency waves. The frequency of a wave refers to the number of complete cycles or oscillations that the wave undergoes per second, and is measured in units of Hertz (Hz).
Learn more about Wave from the given link
https://brainly.com/question/26116832
#SPJ1
how many ml of alcohol and how many ml of water are needed to prepare a 35% alcohol solution containing 15.0 ml alcohol
To prepare a 35% alcohol solution containing 15.0 ml of alcohol, you will need 27.9 ml of water and 15 ml of alcohol.
To calculate this, you can use the equation C1V1 = C2V2, where C1 is the concentration of the alcohol (in this case, 35%), V1 is the volume of alcohol you need (15 ml), C2 is the desired concentration of the solution (35%), and V2 is the total volume of the solution (25 ml).
To prepare a 35% alcohol solution containing 15.0 ml alcohol, you will require 27.9 ml of water. The amount of alcohol and water required to prepare a 35% alcohol solution containing 15.0 ml alcohol is given below:
Given data:
Volume of alcohol = 15 ml% of alcohol = 35%Let us find the amount of water required.
Volume of solution = Volume of alcohol + Volume of waterUsing the above formula, Volume of solution = 15 + Volume of water
Let us find the percentage of water in the solution.
35% alcohol solution implies that the solution contains 35 ml of alcohol in 100 ml of solution. Therefore, the amount of solution that contains 1 ml of alcohol is:
1 ml of alcohol = (100 / 35) ml of solution = 20 / 7 ml of solution= 2.86 ml of solution.Therefore, the amount of solution required to prepare 15 ml of alcohol is:
15 ml of alcohol = 15 × (2.86 ml of solution) = 42.9 ml of solution.Using the formula for volume of solution, 42.9 ml of solution = 15 ml of alcohol + Volume of water.
Volume of water = 42.9 ml of solution - 15 ml of alcohol= 27.9 ml.Therefore, you will require 15 ml of alcohol and 27.9 ml of water to prepare a 35% alcohol solution containing 15 ml of alcohol.
For more equations related to concentration.
https://brainly.com/question/10725862
#SPJ11
a reaction in which simple compounds are assembled into more complex compounds is most accurately described as
A reaction in which simple compounds are assembled into more complex compounds is most accurately described as a Anabolic reaction.The correct answer is "Anabolic Reaction."
An anabolic reaction is the process of creating more complicated molecules from simpler molecules or small substances. They usually require energy to take place, so anabolic reactions often occur in the body when the energy is released, such as when a person eats food. In biological organisms, this reaction process is important since it allows the organism to build more complicated structures necessary for life and growth.The following is a summary of the five types of chemical reactions:Oxidation-reduction reactionsAcid-base reactionsPrecipitation reactionsComplexation reactionsExchange reactionsAnabolic reactions belong to the family of oxidation-reduction reactions. Anabolic reactions need the input of energy to synthesize more complex molecules. Therefore, they are endergonic. Catabolic reactions, on the other hand, break down molecules into simpler forms and produce energy. They are exergonic as they release energy.A chemical reaction refers to a chemical transformation that involves the breaking and forming of bonds between atoms. Chemical reactions take place in the natural world, and they can be observed every day. The transformation of food into energy in our bodies, for example, is an example of a chemical reaction.
For more such questions on Anabolic reactions
https://brainly.com/question/11723570
#SPJ11
you have a 100 ml solution of 0.02 m sodium carbonate (na2 co3 ). you are given the following information:
Student question: You have a 100 mL solution of 0.02 M sodium carbonate (Na2 CO3 ). You are given the following information:
Your answer: To work with this 0.02 M sodium carbonate (Na2CO3) solution, you can follow these steps:
Step 1: Calculate the moles of Na2CO3 in the solution.
To do this, use the formula:
Moles = Molarity × Volume (in L)
Moles = 0.02 M × 0.100 L (since 100 mL = 0.100 L)
Moles = 0.002 mol Na2CO3
Step 2: Utilize the information given in the problem.
As you haven't provided any additional information, you can now use the 0.002 moles of Na2CO3 in the 100 mL solution for your further calculations or reactions, depending on the context of your problem.
What are the spectator ions in Na+ + OH + H+ + Cl → H2O + Na+ + Cl?
O
A. Na+, OH, H+, and CM
OB. OH' and H+
O
O
C. Na+ and CH
D. OH", H+, and H20
E PREVIOUS
9A
The spectator ions in [tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex] is sodium ions and chloride ions.
The spectator ion are defined as the ions which do not participate in chemical reactions and present the same on both sides of the reactions. If we write a net chemical reaction the spectator ions are cancelled from both sides of the equation.
[tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex]
If we compare the chemical solutions before and after the reaction, sodium and chloride ions are present in both solutions but they do not undergo any chemical change at all. These ions present in the solution are called spectator ions since they don't participate in the chemical reaction at all.
To learn more about spectator ion
https://brainly.com/question/16033391
#SPJ4
The correct question is,
What are the spectator ions in
[tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]H_{2} O[/tex] + [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex] ?
David added dilute hydrochloric acid to solid calcium carbonate in a beaker. When he weighed the beaker after the bubbling had stopped, he noticed a reduction in mass. Propose why his results did not appear to agree with the law of conservation of mass
David's results did not appear to agree with the law of conservation of mass due to the release of carbon dioxide gas, which caused a reduction in the total mass of the beaker and its contents.
The law of conservation of mass states that in a chemical reaction, the total mass of the reactants is equal to the total mass of the products. In this case, David added dilute hydrochloric acid to solid calcium carbonate, which is a classic example of an acid-base reaction. The reaction can be represented by the following equation:
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
The reaction produces calcium chloride, carbon dioxide, and water. Carbon dioxide gas is released as bubbles, which can be seen as effervescence.
When David weighed the beaker after the bubbling had stopped, he noticed a reduction in mass. This apparent violation of the law of conservation of mass can be explained by the fact that some of the products of the reaction escaped from the beaker in the form of gas. Since carbon dioxide is a gas, it was released into the air, causing a reduction in the total mass of the beaker and its contents. This means that some of the products were not present in the beaker at the end of the reaction, leading to an apparent decrease in mass.
To know more about hydrochloric acid, here
brainly.com/question/28724754
#SPJ4
how many moles of potassium phosphate (k3po4) are produced from 8.0 8.0 mol of potassium hydroxide (koh)?
8.0 moles of potassium hydroxide (KOH) produces 2.67 moles of potassium phosphate (K₃PO₄).
The reaction is written as:
3KOH + H₃PO₄ -> K₃PO₄ + 3H₂O
This reaction can be described as a double replacement reaction, meaning that two reactants swap partners and form two new products. In this case, the two reactants are KOH and H₃PO₄ and the two products are K₃PO and H₂O.
According to the reaction, 3 moles of KOH will give 1 mole of K₃PO₄.
Therefore, since 8.0 moles of KOH are reacted with phosphoric acid, the number of moles of potassium phosphate (K₃PO₄)produced will be (8/3) = 2.67 moles.
The amount of potassium phosphate produced is directly proportional to the amount of potassium hydroxide used in the reaction.
Therefore, when 8.0 moles of potassium hydroxide (KOH) reacts with H₃PO₄, 2.67 moles of potassium phosphate(K₃PO₄) are produced.
To know more about potassium phosphate, refer here:
https://brainly.com/question/15287665#
#SPJ11
you have 500 ml of a 0.5 m solution of ammonia nh3 (17.03 g / mol) dissolved in water. if you pour a 20 ml sample into a beaker, what will the molar concentration of the sample be?
12.5 mmol/L is the molar concentration of the sample having 0.5 M solution dissolved in water.
To answer this question, we need to calculate the molar concentration of the sample.
First, we need to find the amount of ammonium in the 500 mL of the 0.5 m solution.
We can calculate this by multiplying the molarity by the volume, which gives us 500 mL x 0.5 mol/L = 250 mmol.
Now, to find the molarity of the 20 mL sample, we need to divide the amount of ammonium by the volume of the sample: 250 mmol / 20 mL = 12.5 mmol/L.
Therefore, the molar concentration of the sample is 12.5 mmol/L.
Learn more about molar concentration: https://brainly.com/question/26255204
#SPJ11
plot a theoretical distillation curve of temperature (y-axis) vs. volume in ml (x-axis) for a 15 ml of a mixture containing 60% 1-propanol and 40% 2-propanol. are these two compounds easier to separate by distillation than cyclohexane and toluene? explain your answer. (6 pts)
To plot a theoretical distillation curve please follow the steps while we continue our discussion. Since their boiling point difference is higher it is easier to separate Cyclohexane and toluene by distillation than 1-propanol and 2-propanol.
How to separate two compounds by distillation?Plot a theoretical distillation curve of temperature (y-axis) vs. volume in ml (x-axis) for a 15 ml mixture containing 60% 1-propanol and 40% 2-propanol, follow these steps:
1. Determine the boiling points of 1-propanol and 2-propanol. 1-propanol has a boiling point of 97°C, while 2-propanol has a boiling point of 82°C.
2. Calculate the volumes of each compound in the mixture. 60% of 15 ml is 9 ml (1-propanol) and 40% of 15 ml is 6 ml (2-propanol).
3. Plot the boiling points of each compound on the y-axis, and their respective volumes on the x-axis.
4. Draw a curve connecting the two points to represent the theoretical distillation curve.
To determine if 1-propanol and 2-propanol are easier to separate by distillation than cyclohexane and toluene, compare the boiling point differences between the compounds. The boiling point difference between 1-propanol and 2-propanol is 15°C (97°C - 82°C). The boiling point difference between cyclohexane and toluene is 34°C (110°C - 76°C).
Since the boiling point difference between cyclohexane and toluene is greater than that of 1-propanol and 2-propanol, it can be concluded that cyclohexane and toluene are easier to separate by distillation than 1-propanol and 2-propanol.
To know more Distillation:
https://brainly.com/question/24178852
#SPJ11
calculate the final molarity of h c l h c l the resulting solution when 5.56 ml of 2.896 m h c l 5.56 ml of 2.896 m h c l is added to 4.44 ml 4.44 ml of water.
The final molarity of HCl of the resulting solution when 5.56 ml of 2.896 m HCl is added to 4.44 ml of water is 1.61 m.
The final molarity of HCl in the resulting solution can be calculated using the formula:
M₁V₁ = M₂V₂
where M₁ and M₂ are the concentrations of the first HCl solution and the resulting solution, and V₁ and V₂ are the volumes of the first solution and the resulting solution.
For this particular question, M₁ is equal to 2.896 mol/L, V₁ is equal to 5.56 mL, and V₂ is equal to (5.56 + 4.44) = 10 mL.
Substituting in the values, we can get the final concentration in molarity of the resulting solution.
M₂ = M₁V₁ / V₂
M₂ = (2.896 mol/L)(5.56 mL) / 10 mL
M₂ = 1.61 mol/L
In summary, when 5.56 mL of 2.896 m HCl is added to 4.44 mL of water, the final molarity of HCl in the resulting solution is 1.61 mol/L.
Learn more about molarity here: https://brainly.com/question/17138838.
#SPJ11
the half life of 2n-71 is 2.4 minutes. if we started with 50g at the beginning, how many grams would be left after 12 minutes?
The half life of 2n-71 is 2.4 minutes. if we started with 50g at the beginning, approximately 0.781 g grams would be left after 12 minutes.
Given that the half-life of N-71 is 2.4 minutes. Hence, T₁/₂=2.4 minutes.
Initial mass of N-71 is 50 g.
We need to find out the mass of N-71 left after 12 minutes. We know that half-life is the time required to reduce the initial quantity to half of its value.
Therefore, we can use the following formula: M(t) = Mo (1/2)^{(t/T1/2)}
Where, M(t) is the mass of the isotope at time 't'.
Mo is the initial mass of the isotope.
T₁/₂ is the half-life of the isotope.
t is the time at which the isotope mass is measured.
Substituting the given values in the above formula, we get:
M(12) = 50 (1/2)^{(12/2.4)}
= 50 (1/2)^{(5)}
= 50/32
= 1.5625 g.
Therefore, the number of grams left after 12 minutes would be approximately 0.781 g.
To know more about half life, refer here:
https://brainly.com/question/24710827#
#SPJ11
PLEASE HELP THIS IS URGENT
The equation for the production of sulfur trioxide gas from sulfur dioxide (57.50 g) and oxygen (20.0 L) using the ideal gas law indicates;
The volume of sulfur trioxide that will be formed at STP is 20.1 L
The volume of sulfur trioxide formed at 15.0°C and 98920 Pa is 21.7 L
What is the ideal gas law?The ideal gas law is an equation of state that describes an ideal gas behavior. It relates the pressure (P), volume (V), and temperature (T) of a gas to the number of moles (n) of the gas and the universal gas constant. The equation is written as P·V = n·R·T
The balanced chemical equation for the reaction is: 2SO₂ (g) + O₂ (g) --> 2SO₃ (g)
First, we need to convert the given amounts of reactants to moles. We can do this by using the molar mass of SO₂ (64.07 g/mol) and the ideal gas law for O₂ (P·V = n·R·T). At STP (Standard Temperature and Pressure), the temperature is 0°C (273.15 K) and the pressure is 1 atm (101325 Pa). The gas constant R is 8.314 J/Kmol.
The number of moles of SO₂ is: 57.50 g/(64.07 g/mol) = 0.897 moles
The number of moles of O₂ is; (101325 Pa)·(20.0 L)/(8.314 J/K.mol)·(273.15 K) = 0.892 moles
Since the ratio of SO₂ to O₂ in the balanced equation is 2:1, SO₂ is the limiting reactant and will determine the amount of product formed.
The number of moles of SO₃ produced is; (0.897 mol SO₂)·(2 mol SO₃/2 mol SO₂) = 0.897 mol (Which is based on the number of moles of SO₂ in the reactant side of the equation)
At STP, one mole of any gas occupies a volume of 22.4 L, so the volume of SO₃ produced at STP is: (0.897 mol) × (22.4 L/mol) ≈ 20.1 LTo find the volume of SO₃ at 15°C and 98920 Pa, we can use the ideal gas law again; P·V = n·R·T
V = (n·R·T)/P = ((0.897 mol)·(8.314 J/K.mol)·(288.15 K))/(98920 Pa) ≈ 21.7 LTherefore, the volume of sulfur trioxide formed at STP is 20.1 L and at 15°C and 98920 Pa is 21.7 L
Learn more on the ideal gas law here: https://brainly.com/question/29588640
#SPJ1
write the formula the following compounds and determine the shape of each of the following compounds:sodium tetrahydroxochromate iiipotassium hexachlorocobaltate iihexaaquairon iii chloride
The formula of sodium tetrahydroxochromate III is Na₂Cr(OH)₄, and its shape is tetrahedral.
The formula of potassium hexachlorocobaltate II is K₃CoCl₆, and its shape is octahedral.
The formula of hexaaquairon III chloride is [Fe(H₂O)₆]Cl₃, and its shape is octahedral.
Tetrahedral Geometry: The tetrahedral geometry is characterized by four electron pairs that are distributed around a central atom. It has an angle of 109.5 degrees between adjacent hydrogen atoms.
Octahedral Geometry: An octahedron is a polygon with eight faces. This geometry has an angle of 90 degrees between adjacent molecules.
The six surrounding atoms are all positioned at the same distance from the central atom. The hexaaquairon III chloride compound has six water molecules that are coordinated to an iron center, giving it octahedral geometry.
To know more about tetrahedral geometry click on below link:
https://brainly.com/question/22081359#
#SPJ11
1. personal connections describe your reaction to the events in act i. why might you want to continue reading? explain.
Readers may want to continue reading a work if they are intrigued by the characters, interested in the plot, or invested in the themes and messages presented.
Why will a reader continue reading?
In general, act sets the stage for the rest of the work, introducing key characters, establishing conflicts, and setting the tone and mood.
If a reader finds these elements compelling or engaging, they may be motivated to continue reading to see how the story unfolds and how the characters develop. Additionally, Act I may introduce questions or mysteries that pique the reader's curiosity and encourage them to keep reading to find the answers.
Thus, a reader may want to continue reading a work if they are in interested in the plot.
Learn more about reading here: https://brainly.com/question/24716030
#SPJ1
halogenated hydrocarbons will eventually break into more harmful component parts if they are exposed to:
Answer: Halogenated hydrocarbons will eventually break into more harmful component parts if they are exposed to ultraviolet radiation.
Halogenated hydrocarbons are organic compounds that contain one or more halogen atoms in the form of fluorine, chlorine, bromine, or iodine. When they react with other elements, they produce alkyl radicals and halogen atoms, both of which are reactive.
This reaction can be initiated by exposure to light or heat, which can cause the halogen-carbon bond to break and release halogen atoms.
Thus, halogenated hydrocarbons are a significant source of pollution, particularly in the atmosphere. They are also very durable and will linger in the environment for a long time. As a result, they have a significant effect on the environment and human health.
When exposed to ultraviolet radiation, halogenated hydrocarbons break down into more dangerous component parts that can be toxic to humans and animals.
Learn more about halogenated hydrocarbons here:
https://brainly.com/question/16368714#
#SPJ11
Devise a three-step synthesis of the product from 1-methylcyclohexene. 1. reagent 1 2. reagent 2 3. reagent 3 Select reagent 1: Select reagent 2: Select reagent 2:
The three-step synthesis of the product from 1-methylcyclohexene is as follows: converted into 1-bromo-1-methylcyclohexane with HBr, use NaNH2 (sodium amide) with the product obtained from step 1 and treat the obtained intermediate from step 2 with D2O (heavy water)
It will convert the lithium (Li) atom on the cyclohexyl ring's tertiary carbon atom to a deuterium (D) atom. Here's the answer to the question: Select reagent 1: Hydrobromic acid (HBr)Select reagent 2: Sodium amide (NaNH2)Select reagent 3: Heavy water (D2O). To synthesize the desired product from 1-methylcyclohexene, follow these three steps with the corresponding reagents:
1. Reagent 1: Osmium tetroxide (OsO4)
2. Reagent 2: Sodium periodate (NaIO4)
3. Reagent 3: Sodium borohydride (NaBH4)
Add osmium tetroxide (OsO4) to the 1-methylcyclohexene. This will form a diol via dihydroxylation of the double bond. Add sodium periodate (NaIO4) to the resulting diol. This will cleave the diol into two aldehyde groups through oxidative cleavage. Add sodium borohydride (NaBH4) to the aldehydes formed in step 2. This will reduce the aldehyde groups to the corresponding alcohol groups, resulting in the desired product.
To know more about 1-methylcyclohexene, refer here:
https://brainly.com/question/25587674#
#SPJ11
Although ATP is the main energy currency in cells, other molecules, such as NAD, play a central role in some metabolic pathways by transferring electrons. The oxidized form of NAD is NAD+, and the reduced form is NADH. Identify the components of NAD+ and ATP. NH, O=P 0 NH, N OH OH O 0 NH 0 0 0 O=P-0 OH OH OH OH ATP NAD Answer Bank deoxyribose phosphate adenine nicotinamide ribose Select the components that are common to both ATP and NAD. ribose adenine deoxyribose phosphate nicotinamide
The components that are common to both ATP and NAD are: adenine and ribose. Adenine and ribose are both found in ATP and NAD molecules.
What are ATP and NAD?ATP stands for Adenosine Triphosphate, which is the primary energy carrier in cells. ATP is an energy-rich molecule that stores energy that can be used by the cell. It is composed of three phosphate groups, an adenine base, and a ribose sugar.
NAD stands for Nicotinamide Adenine Dinucleotide, which is an electron carrier molecule that is involved in many cellular metabolic reactions. It is composed of two nucleotides (adenine and ribose) linked by two phosphate groups.
The oxidized form of NAD is NAD+ while the reduced form is NADH.
The components of ATP and NAD are: Adenine and ribose are the two components common to both ATP and NAD.
Other components are specific to each molecule, as follows: ATP components: Three phosphate groups An adenine base A ribose sugar NAD+ components: Nicotinamide (a type of vitamin B3)Adenine A ribose sugar Two phosphate groups.
To learn more about "ATP" here:
https://brainly.com/question/30387542#
#SPJ11
how can the chemical potential energy in an endothermic reaction best be described?(1 point) responses product and reactant chemical potential energy varies in different environments. product and reactant chemical potential energy varies in different environments. products and reactants have the same chemical potential energy. products and reactants have the same chemical potential energy. products have higher chemical potential energy than reactants. products have higher chemical potential energy than reactants. reactants have higher chemical potential energy than products.
The chemical potential energy in an endothermic reaction can best be described as products having a higher chemical potential energy than reactants.
The chemical potential energy of endothermic reactionsThe chemical potential energy in an endothermic reaction can best be described as:
"Products have higher chemical potential energy than reactants."
In an endothermic reaction, energy is absorbed by the system, and the products of the reaction have a higher potential energy than the reactants. This increase in potential energy is typically in the form of heat, which is absorbed from the environment.
Therefore, the correct option products have higher chemical potential energy than reactants.
More on endothermic reactions can be found here: https://brainly.com/question/23184814
#SPJ1
how many kj of energy will be released when 4.72 g of carbon react with excess oxygen gas to produce carbon dioxide
When 4.72 g of carbon react with excess oxygen gas to produce carbon dioxide, 609.6 kJ of energy will be released
This is because the reaction between carbon and oxygen is exothermic, meaning that energy is released when the reaction takes place.
For carbon, the energy released per mole is 717 kJ. For oxygen, the energy released per mole is 498 kJ.
The total energy released in the reaction, you need to multiply the energy released per mole by the number of moles of each element present in the reaction.
In this reaction, 4.72 g of carbon and excess oxygen are present. The atomic mass of carbon is 12.0107 g/mol, which means that 0.3948 moles of carbon are present in 4.72 g.
The atomic mass of oxygen is 15.999 g/mol, which means that 6.26 moles of oxygen are present.
Multiplying the energy released per mole of each element by the number of moles present in the reaction yields the total energy released.
This is equal to 717 kJ/mol x 0.3948 mol = 282.3 kJ, and 498 kJ/mol x 6.26 mol = 3127.48 kJ.
Adding these two values together gives the total energy released in the reaction,
which is equal to 3127.48 kJ + 282.3 kJ = 3409.78 kJ. Since 1 kJ = 1000 J, the total energy released in this reaction is 3409.78 kJ = 3.40978 x 10^6 J.
to know more about carbon refer here:
https://brainly.com/question/22530423#
#SPJ11
the typical concentration of acetic acid in commercial vinegar is 5.0% w/v. calculate the molarity of this solution
The molarity of the commercial vinegar is 0.833 M.
To calculate the molarity of the commercial vinegar, we need to know the formula of acetic acid, which is CH3COOH. Then, we need to convert the percentage w/v to grams per liter (g/L) by assuming 100 mL of solution.
Finally, we can use the formula of molarity to calculate the concentration of acetic acid in moles per liter (mol/L). Here are the steps:
Step 1: Determine the formula of acetic acid (CH3COOH).
Step 2: Convert the percentage w/v to g/L by assuming 100 mL of solution.5.0% w/v = 5.0 g/100 mL = 50 g/L
Step 3: Calculate the molar mass of acetic acid. C = 12.01 g/mol, H = 1.01 g/mol, O = 16.00 g/mol.Molar mass = (2 x C) + (4 x H) + (2 x O) = 60.05 g/mol
Step 4: Calculate the number of moles of acetic acid in 1 L of solution.Number of moles = mass / molar massNumber of moles = 50 g / 60.05 g/mol = 0.8327 mol
Step 5:Calculate the molarity of the solution.Molarity = number of moles / volume Molarity = 0.8327 mol / 1 L = 0.833 M
Therefore, the molarity of the commercial vinegar is 0.833 M.
To know more about acetic acid click on below link:
https://brainly.com/question/15202177#
#SPJ11
ethers are fairly unreactive. which reagent can transform symmetrical ethers into two equivalents of the same alkyl halide? a. pbr3 b. hbr c. socl2/pyridine d. h2so4/h2o
Ethers are fairly unreactive. The reagent that can transform symmetrical ethers into two equivalents of the same alkyl halide is a. PBr3.
Symmetrical ethers have two identical alkyl or aryl groups attached to the oxygen atom in the ether. In addition, symmetrical ethers can be synthesized by the reaction between alkoxides and alkyl halides. Symmetrical ethers are stable and have a low reactivity with most nucleophiles and electrophiles. They are susceptible to acid-catalyzed cleavage of their C-O bond. Thus, in most cases, the breaking of the ether linkage requires strong acids, making the cleavage of ethers a slow reaction.
The reaction of symmetrical ethers with PBr3, a strong nucleophile, can transform symmetrical ethers into two equivalents of the same alkyl halide. PBr3 reacts with the ether oxygen atom to produce a bromide anion, which is then displaced by the alkyl group. A second equivalent of PBr3 can then react with the alkyl halide product to produce another alkyl bromide.
Learn more about ethers at:
https://brainly.com/question/12498712
#SPJ11
write the equilibrium equation for the saturated barium chromate solution. barium chromate equilibrium:
The balanced chemical equation for the reaction between barium chromate and water in order to form a saturated barium chromate solution can be written as follows:
[tex]BaCrO_4 (s) \rightarrow Ba^{2+} (aq) + CrO_4^{2-} (aq)[/tex]
The formula of barium chromate is [tex]BaCrO_4[/tex].
The solution will be saturated once the amount of [tex]BaCrO_4[/tex] dissolved in water reaches its maximum solubility, after which no more [tex]BaCrO_4[/tex] can dissolve in water.
Thus, at the saturation point, the equilibrium equation can be written as follows:
[tex]BaCrO_4 (s) \rightarrow Ba^{2+} (aq) + CrO_4^{2-} (aq)[/tex]
The law of mass action, states that at equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. This allows us to write an expression for the equilibrium constant (K) based on the concentrations of the reactants and products at equilibrium. The equilibrium constant expression varies depending on the balanced chemical equation for the reaction.
To learn about balanced chemical equations refer - https://brainly.com/question/14851443
#SPJ11
How many days are equal to 7000min round two places after the decimal
the molecule to the right is common in many reactions involving electron transfer. which of the circled components are most directly involved in the redox chemistry?
Answer: The X+ and Y- ions are most directly involved in redox chemistry, as the transfer of electrons between them is the basis of the reaction.
The molecule to the right is a diatomic molecule composed of a positively charged cation, X+, and a negatively charged anion, Y-.
The circled components are the X+ and Y- ions. The redox chemistry involves the transfer of electrons between these two components. In a redox reaction, electrons are transferred from the X+ ion (oxidation) to the Y- ion (reduction). This transfer of electrons results in changes to the oxidation states of the ions, X+ and Y-.
The net effect is the conversion of energy, which can be used to drive various chemical reactions.
In summary, the X+ and Y- ions are most directly involved in redox chemistry, as the transfer of electrons between them is the basis of the reaction.
Learn more about redox reactions here:
https://brainly.com/question/15661243#
#SPJ11
what is the total mass in grams of precipitate that can be produced by mixing a solution made from 300g of solid barium chlorate dissolved in 760 ml of a soloution and 540ml of 0.67m lithium sulfate soloution
The total mass of precipitate (BaSO4) that can be produced is 175.6 grams.
What is total mass?Total mass refers to the weight of the shell, its service and structural apparatus, and the largest cargo permitted to be carried
To determine the mass of precipitate that can be produced when solutions of barium chlorate and lithium sulfate are mixed, we need to first write and balance the chemical equation for the reaction:
Ba(ClO3)2 (aq) + Li2SO4 (aq) → BaSO4 (s) + 2LiClO3 (aq)
The balanced equation shows that for every one mole of barium chlorate that reacts, one mole of barium sulfate is produced. Therefore, we need to calculate the number of moles of barium chlorate in the solution to determine the maximum amount of barium sulfate that can be formed.
First, we need to calculate the number of moles of barium chlorate in the solution:
Mass of solid barium chlorate = 300 g
Molar mass of barium chlorate = 2 x atomic mass of Ba + 6 x atomic mass of Cl + 6 x atomic mass of O = 2(137.33 g/mol) + 6(35.45 g/mol) + 6(16.00 g/mol) = 398.22 g/mol
Number of moles of barium chlorate = mass / molar mass = 300 g / 398.22 g/mol = 0.753 mol
Next, we need to calculate the maximum amount of barium sulfate that can be formed from this amount of barium chlorate:
According to the balanced equation, 1 mole of Ba(ClO3)2 produces 1 mole of BaSO4
Therefore, the maximum number of moles of BaSO4 that can be formed is also 0.753 mol
Finally, we can calculate the mass of BaSO4 that can be formed using its molar mass:
Molar mass of BaSO4 = atomic mass of Ba + atomic mass of S + 4 x atomic mass of O = 137.33 g/mol + 32.06 g/mol + 4(16.00 g/mol) = 233.39 g/mol
Mass of BaSO4 = number of moles x molar mass = 0.753 mol x 233.39 g/mol = 175.6 g
Therefore, the total mass of precipitate (BaSO4) that can be produced is 175.6 grams.
Learn more about total mass
https://brainly.com/question/17552181
#SPJ1
if you mix 312 gram(s) of a solute in water and bring it to a final volume of 378 ml, what will be the concentration of the resulting solutions in g/ml? answers cannot contain more than one decimal place.
Answer : If you mix 312 g of a solute in water and bring it to a final volume of 378 mL, the concentration of the resulting solution will be 0.82 g/mL.
To calculate the concentration, divide the mass of solute (312 grams) by the volume of the resulting solution (378 mL). Thus, 312 g/cc/378 mL = 0.82 g/mL. The concentration of a solution is the ratio of the amount of solute (in this case, 312 grams) to the total volume of the solution (in this case, 378 mL). The concentration can be expressed as either grams of solute per milliliter of solution (g/mL) or moles of solute per liter of solution (mol/L).
The concentration of a solution can be increased by either adding more solute or decreasing the volume of the solution. For example, if you mix 500 g of a solute in 500 mL of water, the concentration of the resulting solution will be 1 g/mL. If you then reduce the volume of the solution to 250 mL, the concentration will increase to 2 g/mL.
It is also important to note that the concentration of a solution cannot be greater than the solubility of the solute. This means that the solute must be completely dissolved before it can be added to the solution in order for the concentration to be increased.
Know more about solubility here:
https://brainly.com/question/28170449
#SPJ11
when methanol (ch3oh) is dissolved in water, the temperature of the mixture drops. what does this indicate?
This indicates that when methanol is dissolved in water, an endothermic reaction is taking place, as the heat energy of the mixture is used up to break the bonds of the methanol molecules and dissolve them in the water.
When methanol (CH3OH) is dissolved in water, the temperature of the mixture drops. This indicates that the dissolution of methanol in water is exothermic. During the dissolution process, energy is released, which is transferred from the mixture to the surroundings. This leads to a decrease in the temperature of the mixture.
The following equation represents the dissolution of methanol in water: CH3OH (l) + H2O (l) → CH3OH(aq). When the methanol and water molecules interact with each other, hydrogen bonds are formed between them. The hydrogen bonds lead to the release of energy, which is the cause of the temperature drop.
Therefore, when methanol is dissolved in water, the temperature of the mixture drops, indicating that the process is exothermic.
Read more about the methanol :
https://brainly.com/question/14889608
#SPJ11