PLEASE HURRY !! I NEED HELP!!!

Answer:

We can find the point that partitions line segment AB into a 3:6 ratio by using the formula for finding a point that divides a line segment into two parts in a given ratio.

Let's call the point we're looking for "P". According to the formula, the coordinates of point P can be found using the following equations:

x-coordinate of P = [(6 * x-coordinate of A) + (3 * x-coordinate of B)] / 9

y-coordinate of P = [(6 * y-coordinate of A) + (3 * y-coordinate of B)] / 9

Using the coordinates of points A and B given in the problem, we can plug them into these equations and simplify to find the coordinates of point P:

x-coordinate of P = [(6 * -1) + (3 * 2)] / 9 = 0

y-coordinate of P = [(6 * 2) + (3 * 5)] / 9 = 3.33 (rounded to two decimal places)

Therefore, the point that partitions line segment AB into a 3:6 ratio is approximately (0, 3.33), which is closest to option A: 4,5/3.

Answer:

43 seashells

Step-by-step explanation:

x = 26

x + 31 - 14

(26) + 31 - 14

57 - 14

= 43

The upper and lower 3-sigma control chart limits for this DNA sample data are UCL = 18.53 and LCL = 0

When we are given data on the DNA samples taken over the past 10 days, we can calculate the upper and lower 3-sigma control chart limits. The sample size is 100, and the defective number of DNA samples is given for each of the ten days.

The 3-sigma control limits for a process control chart can be calculated using the following formula: Upper control limit (UCL) = Mean + (3 × Standard Deviation) and Lower control limit (LCL) = Mean - (3 × Standard Deviation),where the mean is the average value of the data, and the standard deviation is the spread of the data around the mean.

Here, we need to calculate the mean and standard deviation of the defective samples for the past 10 days. The average number of defectives per day (mean) is (7+9+9+11+7+8+0+11+13+2) / 10 = 77 / 10 = 7.7

To calculate the standard deviation, firstly, calculate the variance: variance = sum of the squared differences from the mean divided by the number of samples = [tex][(7-7.7)^2 + (9-7.7)^2 + ... + (2-7.7)^2] / 10[/tex]  ≈ 13.01 2.. Now, take the square root of the variance which gives standard deviation. So, standard deviation = [tex]\sqrt{13.01\\}[/tex] ≈ 3.61

Using the 3-sigma rule UCL = Mean + (3 * Standard Deviation) = 7.7 + (3 * 3.61) ≈ 18.53    and   LCL = Mean - (3 * Standard Deviation) = 7.7 - (3 * 3.61) ≈ -3.13. However, since the LCL cannot be negative, we set it to 0 in this context. So, the upper and lower 3-sigma control chart limits are: UCL = 18.53 LCL = 0

To know more about sample data, refer here

https://brainly.com/question/13219930#

#SPJ11

The answer of the given question based on the  the volume of the terrarium will be 70 cubic feet to  solve for x the answer is the terrarium is 7 ft long, 5 ft wide, and 2 ft tall.

A formula is mathematical expression that shows relationship between different variables or quantities. It can be used to calculate value based on given inputs or to derive  mathematical result from  set of conditions or assumptions.

To find the value of x, we can use the formula for the volume of a rectangular prism, which is:

Volume = Length x Width x Height

We are given the dimensions of the terrarium in terms of x, so we can substitute them into the formula:

Volume = (x) * (x-2) * (x-5)

We know that the volume of the terrarium is 70 cubic feet, so we can set the equation equal to 70 and solve for x:

(x) * (x-2) * (x-5) = 70

Expanding left side of equation we get:

x^3 - 7x^2 + 10x = 70

We can simplify this equation by subtracting 70 from both sides:

x^3 - 7x^2 + 10x - 70 = 0

In this case, the constant term is -70 and the leading coefficient is 1, so the possible rational roots are:

±1,±2,±5,±7,±10,±14,±35,±70

We can use synthetic division to simplify the calculation. After testing all the possible roots, we find that the only rational root is x = 7.

This means that the dimensions of the terrarium are:

Length = x = 7 feet

Width = x - 2 = 5 feet

Height = x - 5 = 2 feet

Therefore, the terrarium is 7 ft long, 5 ft wide, and 2 ft tall.

To know more about Synthetic division visit:

https://brainly.com/question/28824872

#SPJ1

we can say that the entries in the matrix are highly constrained, with only one unique value per row or column. The matrix is usually denoted as a scalar multiple of the identity matrix or a vector of constants, depending on whether it is row-wise or column-wise identical.

In the row-wise identical matrix, all entries in each row are the same, but the entries in different rows can be different.

In the column-wise identical matrix, all entries in each column are the same, but the entries in different columns can be different.

Thus, we can say that the entries in the matrix are highly constrained, with only one unique value per row or column. The matrix is usually denoted as a scalar multiple of the identity matrix or a vector of constants, depending on whether it is row-wise or column-wise identical.

Learn more about Matrix

brainly.com/question/28180105

#SPJ11

The speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2[/tex], or 19.2 N.

A particle of mass 1.2 kg is moving with a speed of 8 m/s in a straight line on a horizontal table. A resistance force is applied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, such that [tex]F=0.3v^2[/tex]

The force of resistance is an opposing force that acts to reduce the speed of the particle. As the particle moves faster, the resistance force increases. The force is proportional to the square of the speed, meaning that if the speed doubles, the force is multiplied by four. The force is also in the same direction as the motion, meaning that it will reduce the speed of the particle.

The equation for the force of resistance is [tex]F=0.3v^2[/tex], where v is the speed of the particle. Therefore, if the speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2,[/tex] or 19.2 N. This means that the force of resistance acting on the particle is 19.2 N.

for such more question on resistance

https://brainly.com/question/28135236

#SPJ11

Let (x1, y1) = (9,7) and (x2, y2) = (6,3)

By distance formula,

d = (x2 - x1)² + (y2 - y1)²

d = (6 - 9)² + (3 - 7)²

d = (-3)² + (-4)²

d = 9 + 16

d = 25 units

Answer:

3P-3q

Step-by-step explanation:

you want to distribute the 3, to the whole parenthesis.

First, note that the degree of the polynomial is the highest power of x that appears in the expression. In this case, the degree is max(n, 5, m, 2).

Next, consider the leading coefficient of the polynomial, which is the coefficient of the term with the highest power of x. In this case, the leading coefficient is a.

Based on this information, here are some possible general shapes of the graph of y=f(x):

If n is even and a > 0, the graph of y=f(x) looks like a "U" shape, with both ends pointing upwards.

If n is even and a < 0, the graph of y=f(x) looks like an upside-down "U", with both ends pointing downwards.

If n is odd and a > 0, the graph of y=f(x) looks like a "v" shape, with the vertex pointing upwards.

If n is odd and a < 0, the graph of y=f(x) looks like an upside-down "v", with the vertex pointing downwards.

Note that these are just general shapes, and the actual graph could be modified by the other terms in the polynomial. Additionally, the values of b, c, d, and the constants could also affect the shape and behavior of the graph.

To know more about graph visit:

https://brainly.com/question/17267403

#SPJ9

Complete Question is : let f(x)=ax^n+bx^5+36/cx^m-dx^2+9 where m and n are integers and a,b,c and d are unknown constants. what is the possible graph of the function?

The division expression shown in the model attached to this question is 1/2 ÷ 3

The model missing in the question is added as an attachment

In the model, we have

Shaded sections = 3

Partitons = 1/2

This means that

Division expression = Partitons ÷ Shaded sections

Substituting the above expressions, we have

Division expression = 1/2 ÷ 3

This means that the division expression is 1/2 ÷ 3

When the expression is solved, we have

Division expression = 1/6

Read more about quotients at

https://brainly.com/question/1807180

#SPJ1

Complete question

Which division expression is shown in the model?

See attachment

Answer:

Step-by-step explanation:

E

Answer:

linear equations produce straight lines when graphed, and their rate of change remains constant

Nonlinear equations do not produce straight lines when graphed.

To determine whether its linear or nonlinear, you can graph it and see if it produces a straight line, or check if it can be written in the form y= Mx+b

Step-by-step explanation:

Answer:

Step-by-step explanation:

# elements = 292 - 268 - 1 = 23 elements

G has 2^23 subsets = 8388608

G has 2^23 - 1 proper subsets = 8388607

Step-by-step explanation:

Total surface area is 2πr²+2πrh

2× 22/7 × 5/4× 5/4 + 2 × 22/7 × 5/4 × 11/4

continue like this to get your right answer

Answer:

25 and 22

Step-by-step explanation:

the length of the flower's stem after it was cut is 2/3 of a foot long.

Laura's flower has a stem that is 11/12 of a foot long. If she cuts 3/12 of a foot off the stem, we need to subtract 3/12 from 11/12 to find the length of the remaining stem. To subtract fractions with the same denominator, we simply subtract their numerators and keep the denominator the same. Therefore, we have:

11/12 - 3/12 = 8/12

We can simplify the fraction 8/12 by dividing both the numerator and the denominator by their greatest common factor, which is 4. Therefore, we have:

8/12 = (8 ÷ 4)/(12 ÷ 4) = 2/3

the fraction to show the length of the flower's stem after it was cut

To subtract fractions with the same denominator, we simply subtract their numerators and keep the denominator the same. Therefore, we have:

11/12 - 3/12 = 8/12

Therefore, the length of the flower's stem after it was cut is 2/3 of a foot long.

To know more about greatest common factor,  click here:

brainly.com/question/11221202

#SPJ4

Total volume of the composite figure using volume of cuboid formula is = 120ft³.

A cuboid's volume is a measurement of how much room it occupies. A three-dimensional shape with dimensions of length, breadth, and height is the cuboid. We can keep stacking them, starting with a rectangular sheet, until we achieve a shape with a particular length, breadth, and height.

The shape of this stack of sheets is a cuboid, which has 6 faces, 12 edges, and 8 vertices. The (unit)³ is used to represent a cuboid's volume.

In the given figure,

Length of cuboid = 6ft.

Breadth of cuboid = 3ft.

Height of cuboid = 5ft.

Length of second cuboid = 4ft.

Height of second cuboid = 5ft.

Breadth of second cuboid = 3ft.

Volume of first cuboid = length × breadth × height.

= 6 × 3 × 5

= 90ft³

Volume of second cuboid = 4 × 3 × 5

= 60ft³

Now the second cuboid is half.

So, volume becomes = 60/2

= 30ft³.

So, total volume of the figure = 90 + 30 = 120ft³.

To know more about volume, visit:

https://brainly.com/question/29568631

#SPJ1

The variance of 2X + 3Y is 35.52.

The solution to the problem is as follows:

First, find the mean and variance of X and Y:

E(X) = 3/5

Var(X) = 3/25

E(Y) = 1

Var(Y) = 1/25

Then, use the properties of variance to find the variance of 2X + 3Y:

Var(2X + 3Y)

= 4Var(X) + 9Var(Y) + 12Cov(X,Y)Cov(X,Y)

= E[(2X - 6/5)(3Y - 1)]

= 6E(XY) - 6E(X) - 3E(Y) + 2

= 6 * (integral from 0 to infinity integral from 0 to infinity of xyf(x,y)dxdy) - 6 * 3/5 - 3 * 1 + 2 = 6 * (integral from 0 to infinity 15xye^-3xdydx) - 8

= 54/5

Therefore,

Var(2X + 3Y) = 4(3/25) + 9(1/25) + 12(54/5)

                     = 888/25

                     = 35.52.

To learn more about variance: https://brainly.com/question/15858152

#SPJ11

Therefore, the probability of getting a total of 7 is 6/36, which reduces to 1/6. The probability of getting a total of 8 is 5/36.

In mathematics, probability is a measure of the likelihood that an event will occur. It is usually expressed as a number between 0 and 1, with 0 indicating that the event is impossible and 1 indicating that the event is certain to occur. The probability of an event A is denoted by P(A), and it is defined as the ratio of the number of outcomes favorable to A, to the total number of possible outcomes in the sample space.

Here,

a) The sample space for tossing two fair dice can be represented as a table, where each row represents the outcome of one die, and each column represents the outcome of the other die. The sample space for this experiment would consist of all possible combinations of the two dice outcomes. Here's how the sample space table would look like:

       1 2 3 4 5 6

1 2 3 4 5 6 7

2 3 4 5 6 7 8

3 4 5 6 7 8 9

4 5 6 7 8 9 10

5 6 7 8 9 10 11

6 7 8 9 10 11 12

b) To find the probability of getting a total of 7 or 8, we need to count the number of possible outcomes that result in these totals, and then divide by the total number of possible outcomes in the sample space.

For a total of 7, there are 6 possible outcomes (1+6, 2+5, 3+4, 4+3, 5+2, 6+1).

=6/36

For a total of 8, there are 5 possible outcomes (2+6, 3+5, 4+4, 5+3, 6+2).

=5/36

To know more about probability,

https://brainly.com/question/30034780

#SPJ1

Complete question:

Two fair dice are tossed together once, what is:

a. draw the sample space for the following outcome

b. find the probability of getting a total of 7 and 8 ​

The value of x in this equation is -¼ so, the approximate solution to the equation "-1+3=12x+5" is (x = -¼).

As equation given is -1+3=12x+5

Thus, 2 = 12x+5

12x = -3

x = -3/12

x = -¼

Hence the value of x in this equation is -¼.

The equation for a linear equation in one variable is written as ax+b = 0, where a and b are two integers, and x is a variable. This equation has only one solution. For instance, the linear equation 2x+3=8 only has one variable. As a result, this equation has a single solution, x = 5/2. A linear equation with two variables, however, has two solutions.

Visit here to learn more about the equation: https://brainly.com/question/10413253

#SPJ4

Answer:

The height of the water increases 2 inches per minute.

Step-by-step explanation:

The slope is the rate at which the pool is being filled.

A slope of 2 means a filling rate of 2 inches per minute.

Answer: The height of the water increases 2 inches per minute.

Answer:

Step-by-step explanation:

Standard: 2x^3 - 7x^2 -x-2

Quotient: 2x^3- 7x^2 -x-2

remainder: 0

Answer:

16

Step-by-step explanation:

First you figure out how many days are in 4 weeks which is 28. Then you do 448 divided by 28 which equals 16. There's your answer.

The balance after 6 years when the interest is compounded monthly is $7289.60

To find the balance after 6 years when the interest is compounded monthly, we can use the formula:

A = P(1 + r/n)^(nt)

where:

In this case, P = $5000, r = 6.3% = 0.063 (annual interest rate as a decimal), n = 12 (since interest is compounded monthly), and t = 6.

Plugging in these values, we get:

A = $5000(1 + 0.063/12)^(12*6)

Evaluate

A = $7289.60

Therefore, the balance after 6 years when the interest is compounded monthly is $7289.60

Read more about compound interest at

https://brainly.com/question/28020457

#SPJ1

The process of trying out the resulting equation on a second sample to see if it still fits well is called “cross-validation”.

Cross-validation is a technique used to evaluate the performance of a statistical model on a new independent dataset, which was not used in training the model. This process helps to assess the generalization capability of the model and helps to determine whether the model is overfitting or underfitting the data. By testing the model on a new independent dataset, we can get a better idea of how well the model is likely to perform on new data in the future. Cross-validation can also help in selecting the best model from a set of competing models.

To learn more about cross-validation, refer:-

https://brainly.com/question/30647626

#SPJ4

The mean weight of an individual cauliflower being between 400 and 409 grams has a greater probability.

Standard deviation of the given data is 20 grams. The mean weight of the cauliflower is 400 grams. Now, for calculating the probability, we need to standardize the given mean weight of cauliflower. It will be as follows. Z-score for the mean weight of cauliflower is given as:

z = (X - μ) / σwhere X = 400 grams (mean weight of cauliflower)

μ = 400 grams (mean weight of the population)

σ = 20 grams (standard deviation)z = (400 - 400) / 20 = 0

Now, the probability of the mean weight of an individual cauliflower being between 400 and 409 grams is as follows:

P(400 < X < 409) = P(0 < Z < 0.45)

Using the standard normal distribution table, the probability is 0.1745.

The mean weight of a random sample of 36 of the cauliflowers is between 400 and 409 grams. The mean weight of a random sample of 36 of the cauliflowers is given by:

(X-μ)/ (σ/√n)where μ = 400 grams (mean weight of cauliflower)

σ = 20 grams (standard deviation)

n = 36 (number of samples)

Now, we need to standardize the sample mean. It will be as follows:

z = (X - μ) / (σ/√n)z = (400 - 400) / (20 / √36)

z = 0

As the z-score is zero, the probability will be equal to 0.5. Hence, the mean weight of an individual cauliflower being between 400 and 409 grams has a greater probability than the mean weight of a random sample of 36 of the cauliflowers being between 400 and 409 grams.

To learn more about mean weight refer :

https://brainly.com/question/15904675

#SPJ11

Using expressions,

4a. x= 0 is not possible.

4b. x= 1 is not possible.

5a. (9x-5)(9x+5)

5b. (x-3)(2x+1)

6. 1/(3x-7)

7a. x = (-5,∞)

7b. x = (∞,2]

7c. x = (-3,7]

A mathematical expression is a phrase that has a minimum of two numbers or variables and at least one mathematical operation.

Let's examine the writing of expressions.

The other number is x, and a number is 6 greater than half of it.

As a mathematical expression, this proposition is denoted by the expression x/2 + 6.

Here the values of x has to be such that the denominator is not equal to zero.

So, x cannot be zero and x cannot be 1 as these two values in the respective questions will make the denominator zero.

a. 81x²-25

= 81x² + 45x-45x-25

=9x(9x+5)-5(9x+5)

= (9x-5)(9x+5)

b. 2x²-5x-3

= 2x² + x - 6x -3

= x(2x+1)-3(2x+1)

=(x-3)(2x+1)

Next, the intervals for x are as follows:

x = (-5,∞)

x = (∞,2]

x = (-3,7]

To know more about expression, visit:

https://brainly.com/question/14083225

#SPJ1

Answer:

$25.96

Step-by-step explanation:

Since the tip is 18% of the fare, he pays 118% of the fare.

118% of $22 =

= 1.18 × $22

= $25.96