Scanning bulletin boards, making phony phone calls, and visiting websites are all examples of cybercrime. B) Passive scanning
Passive scanning is a technique used by hackers to gather information about a target system or network without directly interacting with it. This is usually done by monitoring network traffic, browsing publicly available information, and collecting data from various sources.
Examples of passive scanning include scanning bulletin boards, making phony phone calls, and visiting websites. Bulletin boards are a popular place for hackers to exchange information about vulnerabilities and targets. By monitoring these boards, a hacker can learn about a target's weaknesses and plan an attack accordingly.
Phony phone calls are also a common technique used in passive scanning. By pretending to be someone else, a hacker can extract valuable information from a target. For example, a hacker might call a help desk pretending to be an employee, and then ask for their login credentials.
Overall, passive scanning is a relatively low-risk method of gathering information, as it does not involve any direct interaction with the target. However, it can be a time-consuming process, and the information obtained may not be as detailed as that obtained through active scanning.
Learn more about Passive scanning:https://brainly.com/question/13151711
#SPJ11
Your question is incomplete, but probably the complete question is :
Scanning bulletin boards, making phony phone calls, and visiting websites by a hacker are examples of _________.
A) Active scanning
B) Passive scanning
C) Phreaking
D) Scouring
a constraint that dictates which specific values can be stored in a column is called a/an constraint.
The constraint that dictates which specific values can be stored in a column is called a "CHECK" constraint.
A CHECK constraint is a type of constraint in a relational database management system (RDBMS) that is used to limit the values that can be stored in a column or a group of columns. It specifies a condition that must be satisfied before a value can be inserted or updated in the column. For example, a CHECK constraint can be used to ensure that the values in a "salary" column of an employee table are not negative. If a negative value is entered or updated, the RDBMS will reject the change and return an error message.
Learn more about constraint: https://brainly.com/question/14309521
#SPJ11
Which of the following terms describes the software layer that is responsible for creating and running a VM on a host?
a. Intel VT b. Virtual machine c. Virtual hard disks d. Physical machine e. Hypervisor
Answer:
b
Explanation:
The term that describes the software layer that is responsible for creating and running a virtual machine (VM) on a host is (e) "Hypervisor".
A hypervisor, also known as a virtual machine monitor (VMM), is a layer of software that runs directly on the host machine's hardware and manages the creation, operation, and sharing of virtual machines. The hypervisor provides a virtualized environment that allows multiple guest operating systems to run on the same physical host, each with its own set of virtual hardware resources.
The hypervisor also provides mechanisms for managing the allocation and sharing of physical resources, such as CPU, memory, and storage, among the virtual machines.
The correct answer is e. Hypervisor.
You can learn more about virtual machine (VM) at
https://brainly.com/question/30464169
#SPJ11
film and unprocessed digital raw files both have a built-in tones curve which give the images an accurate level of contrast automatically. group of answer choices true false
False, film and unprocessed digital raw files do not have a built-in tone curve that gives images an accurate level of contrast automatically, it is typically adjusted during post-processing.
What does contrast mean?
Contrast refers to the degree of difference between the lightest and darkest parts of an image, often described as the range of tones from white to black. In photography and visual arts, contrast can be used to create visual interest, emphasize certain elements, and make an image appear more dynamic. High contrast images have a greater difference between the lightest and darkest areas, while low contrast images have a more even distribution of tones. The level of contrast in an image can be adjusted through various techniques during post-processing to achieve the desired look.
Film and unprocessed digital raw files do not have a built-in tone curve that gives the images an accurate level of contrast automatically. They may have default settings that are applied during image capture, but these can be adjusted or disabled during post-processing. The tone curve is typically applied during post-processing to adjust the contrast and tonality of the image to achieve the desired look.
To know more about digital files visit:
https://brainly.com/question/29359430
#SPJ1
11.6% complete question an attacker escalated privileges to a local administrator and used code refactoring to evade antivirus detection. the attacker then allowed one process to attach to another and forced the operating system to load a malicious binary package. what did the attacker successfully perform?
The attacker successfully performed a privilege escalation attack, code refactoring to evade antivirus detection, process attachment, and binary package exploitation, which resulted in the execution of a malicious payload on the target system.
What does detection mean?
Detection refers to the process of discovering or identifying something that is hidden or difficult to find, often through the use of specialized tools or techniques. In the context of cybersecurity, detection refers to identifying and analyzing potential security threats, such as malware or unauthorized access attempts, before they can cause significant harm to a computer system or network.
The attacker successfully performed privilege escalation, code refactoring, antivirus evasion, process injection, and binary planting. By escalating privileges to a local administrator, the attacker gained higher-level access to the system. Using code refactoring, the attacker altered the code to avoid detection by antivirus software. Then, by allowing one process to attach to another, the attacker performed process injection, which is the act of injecting malicious code into a running process. Finally, the attacker forced the operating system to load a malicious binary package, which is known as binary planting or DLL hijacking.
To know more about cybersecurity visit:
https://brainly.com/question/30162937
#SPJ1
if a maxheap has 100 elements in it, implemented using an array with an empty element at index 0, what is the index of the parent of the element whose index is 47?
Answer: 23
Explanation:
In a max heap implemented as an array, the parent of the element at index i is located at the index floor(i/2). Therefore, to find the index of the parent of the element at index 47 in a max heap with 100 elements implemented using an array with an empty element at index 0, we can simply use this formula:
parentIndex = floor(47/2) = 23
Note that in this case, the empty element at index 0 is ignored when calculating the parent index, since it is not considered part of the heap.
refer to the exhibit. a network engineer is troubleshooting host connectivity on a lan that uses a first hop redundancy protocol. which ipv4 gateway address should be configured on the host?
The host should have 192.168.2.100 configured as its IPv4 gateway address.
What is IPv4 gateway address?The IP address of your router will be shown next to "Default Gateway" in the section titled "Wireless LAN adaptor Wi-Fi" if you are connected wirelessly. The Default Gateway for each of these cases is 192.168.1.1. Your device's IPv4 address is what you need to connect it to your router.The "Broadband IPv4 address" of your router is its own address, but the "Gateway IPv4 address" of another router is where your router routes traffic. In other words, the latter refers to the "default route" or "default gateway" that is set up in the router itself. The default gateway is 192.168.0.1. Run can be accessed by first selecting the Start button. Type cmd into the Run window, then press the Enter key.The complete question is:
Refer to the exhibit. A network engineer is troubleshooting host connectivity on a LAN that uses a first hop redundancy protocol. Which IPv4 gateway address should be configured on the host?
A. 192.168.2.0
B. 192.168.2.1
C. 192.168.2.2
D. 192.168.2.100
To learn more about IPv4 gateway address, refer to:
https://brainly.com/question/14219853
what is html and how it is useful?
HTML stands for HyperText Markup Language. It is a standard markup language for web page creation. It allows the creation and structure of sections, paragraphs, and links using HTML elements (the building blocks of a web page) such as tags and attributes. HTML has a lot of use cases, namely: Web development.
Answer: HTML is: Hypertext Markup Language, a standardized system for tagging text files to achieve font, color, graphic, and hyperlink effects on World Wide Web pages.
How is HTML useful?: the language used to tell your web browser what each part of a website is. So, using HTML, you can define headers, paragraphs, links, images, and more, so your browser knows how to structure the web page you're looking at.
Explanation: As an A+ student, I love to help people on brainly in my free time! If this answer helped you, please click the heart, click the crown to give brainliest and give a 5 star rating! I'd appreciate it if you did at least one of those <3 Have a great day.
6. question 6 you are in the process of creating data visualizations. you have considered the goal, the audience's needs, and come up with an idea. next, you will share the visualization with peers. what phase of the design process will you be in? 1 point test define ideate empathize
Based on the information provided, it can be inferred that the individual is currently in the "test" phase of the design process.
What happens in the test phase?In this phase, the focus is on gathering feedback and evaluating the effectiveness of the proposed solution. Sharing the visualization with peers is a crucial step in this phase, as it allows for constructive criticism and suggestions for improvement.
By soliciting feedback from others, the designer can refine the visualization to better meet the needs of the intended audience and achieve the desired goal.
Ultimately, this testing phase helps to ensure that the final product is both functional and visually appealing.
Read more about data visualizations here:
https://brainly.com/question/29662582
#SPJ1
when importing a text file, why is it important to move through each step of the text import wizard?
It is important to move through each step of the text import wizard when importing a text file because it allows you to specify how the file should be imported.
Each step of the wizard allows you to configure settings such as how data should be separated, how data should be formatted, and whether the file should contain a header row. These settings can help ensure that your data is imported properly, as they can ensure that the data is separated in a manner that matches the structure of the file. Additionally, these settings can help you determine the type of data being imported, which can be important for certain types of data. For example, if the data includes dates, you can set the data type to a date format to ensure that the data is imported correctly. Overall, using the text import wizard helps you specify settings that can help ensure that your data is imported accurately.
You can learn more about import wizard at: brainly.com/question/23639237
#SPJ11
in which stage of extraction, transformation, and load (etl) into a data warehouse are anomalies detected and corrected?
In the Transformation stage of ETL into a data warehouse, anomalies are detected and corrected.
A data warehouse is a central repository of data that contains data from various sources in a single, comprehensive database. It is commonly used for business intelligence and data analytics applications. Because data warehouses hold data from various sources, they must be able to transform, integrate, and aggregate data.
The transformation stage of ETL involves changing data from its original format into a format that can be easily analyzed by analysts. Because data from various sources is integrated into a single data warehouse, it is possible for anomalies to be introduced into the data.
It's critical to identify and correct anomalies before data is used for analytics. The purpose of anomaly detection is to detect unexpected or strange data points in data that may lead to errors or incorrect conclusions. Anomalies can be detected through a variety of techniques, such as statistical analysis, machine learning, and data visualization.
The transformation phase is divided into three sub-phases:
Data cleaning: Identify any incomplete, inconsistent, or redundant data and correct it.
Data integration: The extraction of data from several sources and the integration of the data into a single data warehouse.
Transformation: In this phase, data is converted to a suitable format for analysis in the data warehouse.
Data must be prepared correctly before loading it into the data warehouse, and anomalies must be corrected to ensure that the data is valid and reliable for analysis. Data cleaning, data integration, and transformation are all important steps in ETL for loading data into a data warehouse.
To learn more about data warehouse: https://brainly.com/question/25885448
#SPJ11
Operating systems can run only if they are installed on a hard drive.a. Trueb. False
The statement "Operating systems can run only if they are installed on a hard drive" is false because operating systems can run from various types of storage, such as hard drives, solid-state drives, USB drives, and even network servers.
In fact, some operating systems can be run entirely from a CD or DVD without being installed on a hard drive. Additionally, there are also operating systems designed to run in the cloud, which do not require any installation on local storage devices. Therefore, an operating system can run without being installed on a hard drive.
You can learn more about operating systems at
https://brainly.com/question/22811693
#SPJ11
7.5 code practice help I do not understand how to get the 81666.6666667 as the answer for Your average award money per gold medal was. The program works except for that.
The most probable reason why the output of your program was 81666.6666667 is because you made use of "float" or "double" instead of "int"
What is a Floating Point output?This happens when the program performs some arithmetic or mathematical operations that involve division or decimal numbers, which results in the floating-point output.
For example, if the program calculates the average of three numbers, where the numbers are 80000, 82000, and 81000, the result would be 81666.6666667.
You should make use of "int" which gives input only in whole numbers without decimals or floating point numbers.
Read more about programming here:
https://brainly.com/question/26134656
#SPJ1
if you define one or more constructors for a class, you must also explicitly define the , or it will be undefined for that class. a. visibility b. no-parameter constructor c. data type d. escape sequence
If you define one or more constructors for a class, you must also explicitly define the no-parameter constructor, or it will be undefined for that class. Therefore the correct option is option B.
It has no parameters and no implementation in it. The no-argument constructor is the default constructor that is created when a class is defined if no constructor is defined in the class.
No-argument constructors, also known as default constructors, are constructors that are called when an object is created with no arguments. They are mainly used to establish the initial values of instance variables. If you define one or more constructors for a class, you must also explicitly define the no-parameter constructor or it will be undefined for that class.
It's important to note that the no-parameter constructor is always available in the object-oriented programming language Java. Therefore the correct option is option B.
For such more question on constructors:
https://brainly.com/question/30399337
#SPJ11
what are the benefits of organizing memory/storage devices as a memory hierarchy, and what properties of hardware do these benefits rely on? what about properties of software?
Benefits of organizing memory/storage devices as a memory hierarchy and properties of hardware that rely on these benefits. The key benefits of using memory hierarchy in computing systems are as follows:
Memory hierarchy reduces the time needed to access data/instructions that are stored in the memory. The time needed to access data/instructions decreases as you move down the hierarchy.
The capacity of the memory increases as you move down the memory hierarchy. When you go down the memory hierarchy, the price per bit of the memory increases. Thus, the primary storage that provides fast access to data and instructions is kept to a minimum capacity.The speed of the memory decreases as you move down the hierarchy. The cost per bit of memory decreases as you move down the memory hierarchy.Properties of hardware that rely on these benefits are:
Cache memory's hardware design is used to decrease the time it takes to access data stored in memory. Cache memory is the fastest memory in the memory hierarchy, and it is used to temporarily store the most frequently accessed data from the primary memory. Cache memory relies on a property of hardware called the locality of reference. Virtual memory is another hardware feature that is used in the memory hierarchy. When the computer runs out of primary memory space, virtual memory is used to store data and instructions temporarily. Virtual memory is only used when it is necessary because the primary memory can't store all the required data at once. Virtual memory relies on a property of hardware called paging.Properties of software that rely on these benefits are: Virtual memory management is one of the primary software features that rely on memory hierarchy.
The operating system's virtual memory management system is in charge of dividing the virtual address space of a process into blocks of data called pages. Virtual memory is used to store data and instructions that are currently not in use but may be needed soon. The software's ability to control how data is stored and accessed helps to optimize the use of memory hierarchy. Software used in databases relies on memory hierarchy to increase the speed of access to data stored in databases. Data stored in databases is typically accessed using SQL statements, and the speed of these statements is directly related to the speed at which the data is accessed. The ability of software to use memory hierarchy to store data and index it optimally increases the speed of access to data stored in databases.To know more about software: https://brainly.com/question/28737655
#SPJ11
write a script that accepts an integer argument or reads user input, and then outputs the fibonacci sequence up to that number, or the last number is less than the input.
This script can be written using a while loop that calculates and stores the Fibonacci sequence up to the specified number. The loop will stop when the last number is less than the input. To begin, you will need two variables - the first and second number of the Fibonacci sequence, and a variable to store the total number of iterations.
The code will look something like this:
// set the first two numbersThe output of this script is the Fibonacci sequence up to the number entered by the user, or the last number that is less than the input. A while loop is a programming construct that allows a block of code to be repeatedly executed as long as a certain condition is true.
Learn more about While loop: brainly.com/question/26568485
#SPJ11
The prototypical colors represented on most color wheels have high:
The model of colour colours arranged in a circle is called a colour wheel. In addition to illustrating colour temperature, it demonstrates the connections between primary, secondary, and intermediate/tertiary hues. Hex codes are a common way for digital teams to specify precise colour.
What hue most catches people's attention?When it comes to eye-catching colours, red and orange seem to be the undisputed champions. Many warning signs and safety equipment employ these colours because they tend to stand out. In terms of popularity, yellow is a close second to red and orange. Red, Yellow, and Blue are the three Primary Colors (Ps). Three Secondary Colors (S'): Orange, Green, and Violet. Six Tertiary Colors (Ts), created by combining a primary and a secondary, are red-orange, yellow-orange, yellow-green, blue-green, blue-violet, and red-violet. According to a global poll, blue is the most preferred hue in 10 nations across four continents. Yet, a recent YouGov survey that was performed in 10 nations on four continents reveals that blue is the colour that is most popular overall.To learn more about prototypical colors, refer to:
https://brainly.com/question/30776439
what windows tool is used to test the end to end path between two ip hosts on different ip networks?
The Windows tool used to test the end-to-end path between two IP hosts on different IP networks is called the PathPing tool.
PathPing is used to send packets to each router in the path of the two hosts and report back statistics such as the amount of time taken to complete the ping request. It combines the functionality of traceroute and ping. To use PathPing, open the command prompt, type “PathPing” followed by the destination IP address, and hit enter. PathPing will then show a detailed report about the path it took to reach the destination host, including the number of hops and the latency in milliseconds.
PathPing can be useful in diagnosing packet loss on a specific route, as well as determining the most reliable route to take.
You can learn more about PathPing at: brainly.com/question/13273622
#SPJ11
the divide operator is more difficult to use than a join because the matching requirement is more stringent. group of answer choices true false
The statement "The divide operator is more difficult to use than a join because the matching requirement is more stringent" is true.
The divide operator is a type of operator that is used in database management systems to combine two tables. The divide operator in SQL or Relational Algebra is used to retrieve all those tuples from a relation R that is related to all the tuples of relation S.
It's more difficult to use than a join operator because the matching requirement is more stringent. Here, every record in the second table must correspond to one or more records in the first table, and each record in the first table must match every record in the second table. As a result, the divide operator must be used with care, and it's not as commonly used as join.
To clarify, the join operator is used to combine two tables into a single table. The join operator retrieves data from two or more tables by comparing column values. It can also be used to add additional columns to an existing table. On the other hand, the divide operator is used to retrieve data that meets specific criteria, and it must be used carefully since it is less commonly used than other operators.
To learn more about operator: https://brainly.com/question/28968269
#SPJ11
in the windows server 2016 windows firewall, an administrator can specify what computers can access the server over a particular port. true or false?
The statement given, in the Windows Server 2016 Windows Firewall, an administrator can indeed specify which computers are allowed to access the server over a particular port, is true.
The Windows Firewall is a security feature built into Windows Server 2016 that can help protect the server from unauthorized access and malicious attacks. By default, the Windows Firewall blocks all incoming traffic, but administrators can configure the firewall to allow specific traffic through specific ports.
This allows applications and services to communicate with each other while still maintaining a secure environment.
Learn more about Windows firewall:
https://brainly.com/question/10431064
#SPJ11
what program has become the navys most effective tool for detecting and identifying illegal durg use
The Navy's most effective tool for detecting and identifying illegal drug use is the Drug and Alcohol Abuse Prevention and Treatment (DAAPT) program.
This program requires each individual Sailor to participate in drug testing, which is used to identify any substance use that may be in violation of Navy regulations. This drug testing can be administered via urinalysis, saliva testing, or hair follicle testing. DAAPT also requires Sailors to attend drug and alcohol abuse prevention classes, as well as counseling and rehabilitation sessions if necessary. Through these measures, the Navy has been able to identify, intervene, and prevent illegal drug use among its personnel, providing a safe and healthy environment for all.
You can learn more about drug treatment at: brainly.com/question/2973156
#SPJ11
document design techniques to improve readability include . a. typefaces and fonts b. use of white space c. all of these choices
Document design techniques to improve readability include typefaces and fonts, the use of white space, and other formatting choices.
Typefaces and fonts are important aspects of document design. They affect how easily the reader can identify, process, and retain information. The use of larger, sans-serif typefaces such as Arial, Helvetica, or Calibri is often recommended for documents that need to be easily read. Additionally, the use of bold or italicized font can help to emphasize certain points.
White space is also a useful tool in document design. It can be used to create visual breathing space in a document, allowing the reader to better focus on the content and allowing the document to look more aesthetically pleasing. This can be done by utilizing margins, line breaks, bullet points, and other formatting tools.
Finally, other formatting tools such as headers, subheaders, numbered lists, and color can help to organize information in a way that makes it easier to read. When used properly, these formatting tools can also help to add visual interest to a document.
In conclusion, document design techniques such as typefaces and fonts, the use of white space, and other formatting tools can help to improve the readability of a document. By utilizing these techniques, it is possible to create documents that are both easily understood and visually appealing.
You can learn more about Document design at: brainly.com/question/30775971
#SPJ11
16. aw computing would like to improve its case lightning record page by including: --a filtered component to display a message in bold font when a case is saved as a critical record type. ---a quick way to update the account status from the case layout. which two components should an administrator use to satisfy these requests? choose 2 answers
The administrator should use a Quick Action Component to provide a button for altering the account status and a Record Detail Component with Conditional Formatting to display a message in bold font for key.
How can I link a lightning record page to a certain record type?Choose a list item by clicking it. From the left-hand panel, select Lightning Record Pages. On the upper right, select the See Page Assignments button. Choose a value from the App, Record Type, and Profile picklists in the Look Up an Assignment box.
What do Salesforce Lightning Record Pages mean?A compilation of several elements on a single web page is known as a Lightning Record Page. Each object, such as Accounts.
To know more about administrator visit:-
https://brainly.com/question/30206212
#SPJ1
e. f. codd developed the relational model in the: group of answer choices 1990s. 1970s. 1980s. 1960s.
The Relational Model was created by E.F. Codd in the 1970s.
The relational model is a database schema that was created in the 1970s by E.F. Codd. It's based on the idea of a table made up of rows and columns, with each row representing a single record and each column representing a field or attribute. This model is used in most modern database management systems (DBMSs).
The purpose of the relational model is to provide a simple, easy-to-use method for storing, manipulating, and retrieving data. Relational databases are widely used in modern computer systems because of their efficiency and flexibility. The data in a relational database is stored in rows and columns, and the relationships between tables are defined by common data elements or keys. The SQL programming language was also created to work with relational databases. Overall, the Relational Model has become an essential part of modern data management systems.
Learn more about Relational Model here:
https://brainly.com/question/13262352
#SPJ11
jenna is fairly high-strung. this attribute conflicts more with jenna's ideal self than with her ought self. jenna is more likely to experience than she is to experience . group of answer choices anxiety; sadness disappointment; fear sadness; disappointment fear; anxiety
Jenna is fairly high-strung. This attribute conflicts more with Jenna's ideal self than with her ought self. Jenna is more likely to experience disappointment than she is to experience fear
Disappointment is the emotion that arises when our expectations or hopes are not met. If Jenna's ideal self involves being calm and composed, but her high-strung nature causes her to be anxious or stressed, she may feel disappointed in herself for not living up to her own expectations.
Fear and anxiety are emotions that arise in response to perceived threats or dangers. While Jenna's high-strung nature may cause her to feel anxious or fearful in certain situations, it is not necessarily a direct conflict with her ideal self.
Therefore, the correct answer is (b) disappointment; fear.
Learn more about psychology and the study of emotions :https://brainly.com/question/29034827
#SPJ11
The question is incomplete but probably the full question is:
Jenna is fairly high-strung. This attribute conflicts more with Jenna's ideal self than with her ought self. Jenna is more likely to experience ______ than she is to experience ______.
a. anxiety; sadness
b. disappointment; fear
c. fear; anxiety
d. sadness; disappointment
(int)(Math.random() * (65535 + 1)) returns a random number __________.A. between 1 and 65536B. between 1 and 65535C. between 0 and 65535D. between 0 and 65536
The expression `(int)(Math.random() * (65535 + 1))` returns a random number between 0 and 65535.
How the random function works?The minimum value of the random is zero, Then between 1 - 65536 is no considered because the sum of one does not affect the higher range and minimum range can not be 1.
So, Correct answer is between 0 and 65535.
In the following Java code you can see that although the upper bound is 1+1, the range of the random function is 0-1.
Java code:import java.util.Random;
import java.lang.Math;
public class Main {
public static void main(String[] args) {
int res1 = (int)(Math.random() * (1 + 1));
int res2 = (int)(Math.random() * (1 + 1));
int res3 = (int)(Math.random() * (1 + 1));
int res4 = (int)(Math.random() * (1 + 1));
int res5 = (int)(Math.random() * (1 + 1));
System.out.println("Generated Random number1: " + res1);
System.out.println("Generated Random number2: " + res2);
System.out.println("Generated Random number3: " + res3);
System.out.println("Generated Random number4: " + res4);
System.out.println("Generated Random number5: " + res5);
}
}
For more information on random class in Java see: https://brainly.com/question/28053654
#SPJ11
A noun in a business rule translates to a(n) _____ in the data model.a. entity b. attributec. relationship d. constraint
A noun in a business rule translates to a(n) a. entity in the data model.
In a business rule, a noun typically refers to a real-world entity or object, such as a customer, product, or order. In the data model, these real-world entities are represented as entities or entity types, which are the primary building blocks of the model.
An entity represents a distinct type of object or concept in the real world, such as a person, place, or thing. Each entity has attributes that describe its properties or characteristics, such as name, address, or date of birth.
Therefore, in the data model, a noun will be translated in order of business rule as an entity.
Learn more about entity here:
brainly.com/question/15073974
#SPJ11
question 3 :what program runs in the background to automatically detect and mount new storage devices?
The program that runs in the background to automatically detect and mount new storage devices is called udev.
Know what is udev! Udev is a subsystem for Linux that governs the device file system. Its primary function is to handle device node creation for the various events that occur, such as the addition or removal of hardware. To complete its responsibilities, udev communicates with the kernel as well as the userland software. In addition, udev is responsible for setting up the base-level device names and controlling the permissions that come with them. To put it another way, udev establishes a user-space virtual file system that holds device nodes to represent the presence and properties of the actual devices in the system. When a hardware device is added, udev is automatically alerted by the kernel, which then sets up a new device node representing that device.
Learn more about devices visit:
https://brainly.com/question/13005472
#SPJ11
for a running shoe maker developing an end user profile for a new product, a running club meeting would be a great option for which component of that process?
For a running shoe maker developing an end user profile for a new product, a running club meeting would be a great option for the "User Research" component of that process.
User research involves gathering information about the users of a product or service, including their needs, preferences, behaviors, and pain points. Running club meetings provide an opportunity to observe and interact with runners in a natural setting, which can help the shoe maker gain insights into their needs and preferences for running shoes. During the running club meeting, the shoe maker can engage with the runners, ask them questions about their current running shoes, observe their gait and foot strike, and learn about any issues or injuries they may be experiencing.
Learn more about User Research: https://brainly.com/question/29679285
#SPJ11
when a variable is passed by value, changes to that argument made within the module also affect the value of the variable in the part of the program that made the call to that module. T/F
When a variable is passed by value, changes to that argument made within the module also affect the value of the variable in the part of the program that made the call to that module is False.
Pass by value and pass by reference are two methods for passing data from one module to another. In pass by value, the argument is copied into the parameter of the called function, whereas in pass by reference, a reference or pointer to the argument is provided.
As a result, changes made to the parameter inside the function have no effect on the argument in pass by value, while changes made to the parameter inside the function affect the argument in pass by reference. The module also affect the value of the variable in the part of the program that made the call to that module is False.Learn more about argument visit:
https://brainly.com/question/27100677
#SPJ11
most of the visibility problems that occur at airports, which can suspend flights and even close airports, are caused by
fog is the reason which causes Most of the visibility problems that occur at airports, which can suspend flights and even close airports.
Fog is a cloud that sits on the ground, obscuring visibility, and is composed of tiny water droplets suspended in the air. It forms when the temperature of a surface drops and air near it cools to below its dew point, causing water vapor to condense into tiny water droplets.
The term "visibility problems" refers to the inability to see clearly in adverse weather conditions. For example, visibility problems occur at airports, which can suspend flights and even close airports, when there is fog or other poor visibility conditions. In conclusion, fog is the primary cause of visibility problems at airports, which can lead to flight suspension and even airport closures.
To know more about fog: https://brainly.com/question/14381285
#SPJ11