Based on the information, the net force acting on sphere B is 0 N.
How to calculate the valueNet force refers to the overall force acting on an object or system. It is determined by considering all the individual forces acting on the object and combining them according to their magnitudes and directions.
When multiple forces act on an object, they can either be in the same direction or in opposite directions. If the forces are in the same direction, the net force is equal to the sum of the individual forces.
The forces exerted by spheres X and Y on sphere B are equal in magnitude and opposite in direction. Therefore, they cancel each other out and the net force on sphere B is 0 N.
F(BX) = F(BY) = 6.0 × 10^-6 N
F(net) = F(BX) + F(BY) = 0 N
Learn more about force on
https://brainly.com/question/12970081
#SPJ1
Find the current flowing out of the battery.
Answer:
5A
Explanation:
Power electronics and motion control system
A single-phase full-bridge uncontrolled (diode) rectifier is supplied by 220 V, 50 Hz source. Neglecting the diodes volt-drops,
a. Calculate the Average and rms values of the Output Voltage, Output (load) Current, the Ripple and Form Factors, when load is pure resistive R=10 Ohm.
b. Assume that load has inductive nature and L>> R and load current is flat and equal to 12 Ampere. Calculate the input Active Power, input Apparent Power and Power Factor (neglect diode losses)
a. output voltage is 110 V, the RMS output voltage is approximately 155.56 V, the output (load) current is 15.56 A, the ripple factor is 0.866, and the form factor is 0.866. b. the input active power is 2640 W, the input apparent power is 2640 VA, and the power factor is 1 (or unity).
a. For a single-phase full-bridge uncontrolled (diode) rectifier with a pure resistive load of R = 10 Ohms and neglecting diode volt-drops, we can calculate the following values:
Average Output Voltage:
The average output voltage of a full-bridge rectifier can be calculated as half of the peak input voltage. Since the input voltage is 220 V, the average output voltage will be:
Average Output Voltage = (220 V) / 2 = 110 V
RMS Output Voltage:
The RMS output voltage of a full-bridge rectifier can be calculated as the peak input voltage divided by the square root of 2. In this case, the RMS output voltage will be:
RMS Output Voltage = (220 V) / √2 ≈ 155.56 V
Output (Load) Current:
Since the load is pure resistive, the output (load) current will be the same as the RMS output voltage divided by the load resistance. Therefore:
Output (Load) Current = RMS Output Voltage / R = 155.56 V / 10 Ω = 15.56 A
Ripple Factor:
The ripple factor for a full-bridge rectifier can be calculated as the ratio of the RMS value of the ripple voltage to the average output voltage. In this case, since we are neglecting diode volt-drops, the ripple factor is:
Ripple Factor = √(3/4) ≈ 0.866
Form Factor:
The form factor is the ratio of the RMS value of the output current to its average value. Since the load is purely resistive, the form factor is the same as the ripple factor:
Form Factor = 0.866
b. Now, assuming the load has an inductive nature with L >> R and a load current of 12 Amperes:
Input Active Power:
The input active power can be calculated as the product of the RMS input voltage, RMS input current, and the power factor. In this case, since the load current is flat and equal to 12 Amperes, and we neglect diode losses, the input active power will be:
Input Active Power = (220 V) * (12 A) = 2640 W
Input Apparent Power:
The input apparent power can be calculated as the product of the RMS input voltage and RMS input current. Therefore:
Input Apparent Power = (220 V) * (12 A) = 2640 VA
Power Factor:
The power factor is the ratio of the input active power to the input apparent power. In this case, the power factor will be:
Power Factor = Input Active Power / Input Apparent Power = 2640 W / 2640 VA = 1 (or unity)
Note: Neglecting diode losses implies that we assume the diodes are ideal, without any voltage drops or losses during the rectification process. In practical scenarios, there will be some voltage drops across the diodes, and losses should be taken into account for more accurate calculations.
Therefore, a. For a single-phase full-bridge uncontrolled (diode) rectifier with a pure resistive load of 10 Ohms, neglecting diode volt-drops, the average output voltage is 110 V, the RMS output voltage is approximately 155.56 V, the output (load) current is 15.56 A, the ripple factor is 0.866, and the form factor is 0.866. b. Assuming a load with an inductive nature, L >> R, and a flat load current of 12 A, the input active power is 2640 W, the input apparent power is 2640 VA, and the power factor is 1 (or unity).
To learn more about Power electronics click:
https://brainly.com/question/32157326
#SPJ1
The diagram shows the electric field due to point charge Q. The negative charge, A, is within the field. Charge Q has vectors radially inward starting perpendicular from the surface. The farther you get from the charge, the shorter the vectors. All vectors point towards the charge. A point labeled A is just to the right of the charged object. Which statements are correct? Check all that apply. Charge Q is positive. Charge Q is negative. The electric field is uniform. The electric field is nonuniform. If charge A is negative, it moves away from charge Q. If charge A is positive, it moves away from charge Q.
The correct statements are:Charge Q is positive, the electric field is nonuniform and if charge A is negative, it moves away from charge Q.
Based on the given information, we can make the following conclusions:
Charge Q is positive: The diagram shows that the electric field vectors point radially inward towards charge Q. Since like charges repel each other, for the vectors to point towards charge Q, it must be positive.
The electric field is nonuniform: The statement mentions that "the farther you get from the charge, the shorter the vectors." This implies that the magnitude of the electric field decreases with distance from charge Q. Therefore, the electric field is nonuniform.If charge A is negative, it moves away from charge Q: In the diagram, charge A is within the electric field of charge Q. Since opposite charges attract each other, if charge A is negative, it will experience a force that pulls it towards charge Q. Therefore, it will move towards charge Q, not away from it.
If charge A is positive, it moves away from charge Q: This statement is incorrect. According to the previous conclusion, if charge A is positive, it will experience a force that attracts it towards charge Q. Therefore, it will move towards charge Q, not away from it.
The provided information does not specify the behavior of charge A when it is positive. It is possible that charge A could move towards charge Q, or it could experience other forces depending on its position and the magnitude of the charges involved.
for such more questions on electric
https://brainly.com/question/1100341
#SPJ8
Gas and plasma are phases of matter, yet gas runs a car and plasma is part of your blood. Compare and contrast these terms and offer an explanation for the use of similar names.
Plasma lacks a precise form or volume, much like gas. It completes the empty space. Even though it is in the gaseous form, there is a difference because some of the particles are plasma-ionized.
High-energy particles are free to move around and fill the area they inhabit in the state of matter known as gas.
Neutral atoms or molecules often make up gaseous substances like air.
The ionised gas known as plasma, on the other hand, contains both positively and negatively charged particles.
It develops when a gas is subjected to an intense electric field or heated to incredibly high temperatures.
Plasma is a substance that may be found in stars, lightning, and fluorescent lights. It is also an essential component of many modern technology, like plasma TVs and fusion reactors.
To learn more about phases of matter, click:
https://brainly.com/question/2141361
#SPJ1
An astronaut has a total mass of 110 kg.
On the moon, he climbs into his spacecraft, 5 m up a ladder.
His GPE increases by 880 J.
What is the strength of gravity on the moon?
The strength of gravity on the moon is approximately 1.6 J/kg.
The change in gravitational potential energy (GPE) is given by the equation:
ΔGPE = m * g * Δh
where ΔGPE is the change in gravitational potential energy, m is the mass of the object, g is the strength of gravity, and Δh is the change in height.
In this case, the astronaut's GPE increases by 880 J as he climbs up the ladder by 5 m. We can rewrite the equation as:
880 J = (110 kg) * g * (5 m)
To find the strength of gravity on the moon (g), we can rearrange the equation:
g = 880 J / (110 kg * 5 m)
g = 1.6 J/kg
Therefore, the strength of gravity on the moon is approximately 1.6 J/kg.
It's important to note that the value of gravity on the moon is significantly lower than that on Earth. The moon has about one-sixth the gravity of Earth, which means objects weigh less on the moon compared to Earth. This lower gravity is due to the moon's smaller mass and smaller radius compared to Earth.
As a result, astronauts experience a different gravitational environment on the moon, which affects their movements and the energy required to perform tasks such as climbing.
For more such questions on strength of gravity visit:
https://brainly.com/question/940770
#SPJ8
Question 2 of 10
Which of the following represents a beta particle?
O A. e
OB. Y
O C. a
O D. He
400g of cold water is added to 200g of water at 70 degree celsius if they are properly mixed and the temperature is mixed and it is 30 degrees Celsius calculate the initial temperature of the cold water.
The initial temperature of the cold water is 10°C.
Mass of the cold water, m₁ = 400 g = 0.4 g
Mass of the water to which the cold water is added, m₂ = 200 g = 0.2 g
Temperature of the water to which the cold water is added, T₂ = 70°C
Temperature of the mixture, T = 30°C
According to the principle of calorimetry,
m₁T₁ + m₂T₂ = (m₁ + m₂)T
(0.4 x T₁) + (0.2 x 70) = (0.4 + 0.2) x 30
0.4T₁ + 14 = 18
0.4T₁ = 18 - 14
0.4T₁ = 4
Therefore, the initial temperature of the cold water is,
T₁ = 4/0.4
T₁ = 10°C
To learn more about temperature, click:
https://brainly.com/question/20892641
#SPJ1
Ex) A wire has resistance R. Another wire, of the same material, has half the length and half the diameter of the first wire. The resistance of the second wire is?
The resistance of the second wire is twice the resistance of the first wire R₂ = 2R₁
Understanding ResistanceThe resistance of a wire is directly proportional to its length and inversely proportional to the cross-sectional area.
Let:
R₁ = resistance of the first wire
R₂ = resistance of the second wire
L₁ = length of the first wire
L₂ = length of the second wire
r₁ = radius of the first wire
r₂ = radius of the second wire
Given:
L₂ = L₁/2
r₂ = r₁/2
A₂ = A₁/4
Since resistance is inversely proportional to the cross-sectional area, which is proportional to the square of the radius.
Now, we can use the formula for resistance:
R = (ρL) / A
where
ρ is the resistivity,
L is the length,
A is the cross-sectional area.
For the first wire:
R₁ = (ρL₁) / A₁
For the second wire:
R₂ = (ρL₂) / A₂
Substituting the relationships we derived earlier:
R₂ = (ρ(L₁/2)) / (A₁/4)
R₂ = (ρL₁) / (A₁/2)
R₂ = 2(ρL₁) / A₁
Since ρL₁/A₁ is equal to R₁ (the resistance of the first wire), we can substitute:
R₂ = 2R₁
Learn more about resistance here:
https://brainly.com/question/17563681
#SPJ1
A car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway. Calculate: a) Total distance and total displacement (in mile and meter) b) Average speed and Average velocity (in mile/hr and m/s
The total distance covered by the car is 300 miles.
The total displacement covered by the car is zero.
The average speed of the car is 17.88 m/s.
The average velocity of the car is also zero.
Distance between the points A and B, d = 150 miles
Time taken by the car to travel from A to B, t₁ = 3 hours
Time taken by the car to travel from B to A, t₂ = 5 hours
a) Given that the car travelled from A to B and then back to A.
Therefore, the total distance covered by the car is,
Distance = 2 x d
Distance = 2 x 150
Distance = 300 miles
Since the car is travelling from A to B and then returning back to the initial point A, the total displacement covered by the car is zero.
b) The speed with which the car travelled from A to B is,
v₁ = d/t₁
v₁ = 150/3
v₁ = 50 miles/hr
v₁ = 22.35 m/s
The speed with which the car travelled from B to A is,
v₂ = d/t₂
v₂ = 150/5
v₂ = 30 miles/hr
v₂ = 13.41 m/s
Therefore, the average speed of the car is,
v = (v₁ + v₂)/2
v = (22.35 + 13.41)/2
v = 17.88 m/s
As, the total displacement of the car is zero, the average velocity of the car is also zero.
To learn more about average speed, click:
https://brainly.com/question/10449029
#SPJ1
1. Calculate the increase in length of an iron wire that is 30m long at 20°c when it is warmed to 45°c (take airon 1.1x10³J/k)
2. If 2200 Joule of heat is added to a 190 g object its temperature increases by 12°c.W hat is
a. specific heat capacity
b. heat capacity of the object
The increase in length of the iron wire when warmed from 20°C to 45°C is approximately 8.25 millimeters. The specific heat capacity of the object is approximately 9.62 J/kg°C. The heat capacity of the object is approximately 1.83 J/°C.
ΔL = L × α × ΔT
Where:
ΔL is the change in length
L is the original length of the wire
α is the coefficient of linear expansion for iron
ΔT is the change in temperature
The coefficient of linear expansion for iron is typically 1.1 x [tex]10^(^-^5^)[/tex] °[tex]C^(^-^1^)[/tex].
Given:
L = 30 m (original length of the wire)
α = 1.1 x [tex]10^(^-^5^)[/tex] °[tex]C^(^-^1^)[/tex] (coefficient of linear expansion)
ΔT = 45°C - 20°C = 25°C (change in temperature)
ΔL = 30 m × (1.1 x [tex]10^(^-^5^)[/tex] °[tex]C^(^-^1^)[/tex]) × 25°C
= 30 m × 1.1 x[tex]10^(^-^5^)[/tex] × 25
= 8.25 x [tex]10^(^-^3^)[/tex] m
2) Q = mcΔT
Where:
Q is the heat energy transferred
m is the mass of the object
c is the specific heat capacity
ΔT is the change in temperature
Given:
Q = 2200 J (heat energy transferred)
m = 190 g (mass of the object)
ΔT = 12°C (change in temperature)
a. Specific heat capacity (c):
one need to rearrange the formula to solve for c:
c = Q / (m × ΔT)
Substituting the given values:
c = 2200 J / (190 g × 12°C)
First, need to convert the mass to kilograms:
m = 190 g = 190 g / 1000 = 0.19 kg
Now can calculate the specific heat capacity:
c = 2200 J / (0.19 kg × 12°C)
= 9.62 J/(kg°C)
b. Heat capacity (C):
The heat capacity is the amount of heat energy required to raise the temperature of the object by 1 degree Celsius.
C = mc
Substituting the given values:
C = 0.19 kg × 9.62 J/(kg°C)
= 1.83 J/°C
Learn more about the specific heat here
https://brainly.com/question/16792262
#SPJ1
A 5.00-ohm resistor, a 10.0-ohm resistor, and a 15.0-ohm resistor are connected in parallel with a battery. The current through the 5.00-ohm resistor is 2.4 amperes.
Calculate the potential difference.
Group of answer choices
12.0 V
12.5 V
6.55 V
2.08 V
3. North America's weather is
mostly controlled by?
The third-largest continent, North America, with an area of 24,346,000 sq km.
Thus, The entire continent of North America, including any associated offshore islands, is located north of the Panama Canal, which connects it to South America.
It features a wide range of climates, from the sweltering heat of the tropics to the dry, icy cold of the Arctic. An icecap is always there, keeping the interior of Greenland permanently cold and climate.
Only briefly each summer do temperatures above zero degrees Fahrenheit rise in the vast, treeless tundra of North America. Low-lying regions in the deep south are constantly hot and wet. The majority of the rest of North America experiences chilly winters and mild summers.
Thus, The third-largest continent, North America, with an area of 24,346,000 sq km.
Learn more about Climates, refer to the link:
https://brainly.com/question/31682134
#SPJ1
The answer to these please
Ohm's law is defined as the applied voltage (V) is directly proportional to the current flow (I) in the circuit. V =IR, where R is the resistance of the circuit that resists the current flow in the circuit, and the unit of resistance is the ohm.
From the given,
1) a) resistors in the circuit are connected in parallel, then the voltage in the circuit remains the same. The voltage across each resistor is 9V.
b) the current in each resistor is given by, V=IR
I₁ = V/R₁ = 9/10kΩ=0.9mA.
I₂ = V/R₂ = 9/2kΩ = 4.5mA
I₃ = V/R₃ = 9/1kΩ = 9mA.
2) a) the resistances are connected in parallel, the effective resistance is 1/R(eff) = 1/R₁ + 1/R₂
1/R(eff) = 1/(100) + 1/(250)
= 250+100/25000
= 350/25000
= 7/500
R₁(eff) = 500/7
1/R(eff) = 1/R₁ + 1/R₂
= 1/350 + 1/200
= 200+350/70000
= 550/70000
= 11/1400
R₂(eff) = 1400/11
Thus, the two effective resistances are connected in series,
R(e) = R₁(eff) + R₂(eff)
= 500/7 + 1400/11
= (500×11) + (1400×7)/77
= 5500 + 9800 / 77
= 15300/77
R(e) = 198 Ω.
B) total current, I = V/R
I = 24 /198
= 121mA.
3) a) the resistances are connected in series, the total resistance,
R(eff) = R₁ + R₂
= 3+3
R(eff) = 6Ω
b)Current, I = V/R
I = 12/6
= 2A
c)Power, P = I²R = 2×2×6
P = 24W is the power in each bulb.
d) Power, P = VI = 12×2 = 24 W, is the power in battery.
4) a) the resistances are connected in parallel,
1/R(eff) = 1/R₁ + 1/R₂
= 1/3 + 1/3
= 2/3
R(eff) = 3/2Ω
b) In a parallel circuit, the voltage remains unchanged.
Voltage = 12V
c) Current, I = V/R
I₁ = V/R₁ = 12/3 = 4A
I₂ = V/R₂ = 12/3 = 4A.
d) power, P = I²R =4²3=48W.
e) Total current in the circuit, I = I₁+I₂
I = 4 + 4
= 8A
f) power supplied by a battery, P = VI
P = 12×4 = 48 W.
To learn more about series and parallel circuits:
https://brainly.com/question/32020955
#SPJ1
In the diagram, R₁ = 40.0 , R2= 25.4 , and R3 = 70.8 . What is the equivalent resistance of the group?
According to the diagram the equivalent resistance of the group is
40.05 ohms
How to find the equivalent resistanceThe equivalent resistance is calculated by investigating the diagram to note that R2 and R3 are in parallel and both are in series to R1
Resistors in parallel is solved by
Resistors in parallel = 1/25.4 + 1/70.8
Resistors in parallel = 0.0535 ohms
Equivalent resistance
Equivalent resistance = Resistors in parallel + Resistor in series
Equivalent resistance = 0.0535 + 40
Equivalent resistance = 40.0535
Learn more about equivalent resistance at
https://brainly.com/question/30901006
#SPJ1
when the trigger is pulled on a cordless drill it takes 0.36s for the drill bit to reach 5200rpm. If the drill spins counterclockwise then, what is the angular acceleration of the drill bit?
The angular acceleration of the drill is 1512.5 rad/s².
Time taken for the drill, t = 0.36 s
Angular velocity of the drill, ω = 5200 rpm = 544.5 rad/s
The change in angular velocity that a spinning object experiences per unit of time is expressed quantitatively as angular acceleration, also known as its rotational acceleration.
It is a vector quantity that has two distinct directions or senses as well as a component of magnitude. The unit of angular acceleration is rad/s².
So,
The expression for the angular acceleration is given by,
α = ω/t
α = 544.5/0.36
α = 1512.5 rad/s²
To learn more about angular acceleration, click:
https://brainly.com/question/1980605
#SPJ1
Particles q₁ = -29.6 μC, q2 = +37.7 μC, and
93-10.8 μC are in a line. Particles q₁ and q2 are
separated by 0.630 m and particles q2 and q3 are
separated by 0.315 m. What is the net force on
particle q₁?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-29.6 AC
91
0.630 m
+37.7 μC
+92
0.315 m
-10.8 μC
93
On particle q1, there is a net force of about +25.6 N, directed to the right.
We must take into account the electrostatic forces between particle q1 and the other two particles, q2 and q3, in order to calculate the net force on particle q1. Coulomb's Law describes the electrostatic force between two charged particles:
F = k * |q₁ * q₂| / r²
F is the force, k is the electrostatic constant (9 x 109 N m2/C2), q1 and q2 are the charges' magnitudes, and r is the distance separating them.
Let's first determine the force between q1 and q2:
F₁₂ = k * |q₁ * q₂| / r₁₂²
F₁₂ = (9 x 10^9 N m²/C²) * |(-29.6 μC) * (+37.7 μC)| / (0.630 m)²
F₁₂ = (9 x 10^9 N m²/C²) * (29.6 x 10^-6 C) * (37.7 x 10^-6 C) / (0.630 m)²
F₁₂ ≈ -7.45 N
The minus symbol denotes an attracting force between q1 and q2, pointing to the left.
Let's next determine the force between q2 and q3:
F₂₃ = k * |q₂ * q₃| / r₂₃²
F₂₃ = (9 x 10^9 N m²/C²) * |(+37.7 μC) * (-10.8 μC)| / (0.315 m)²
F₂₃ = (9 x 10^9 N m²/C²) * (37.7 x 10^-6 C) * (10.8 x 10^-6 C) / (0.315 m)²
F₂₃ ≈ +33.05 N
Positively directed to the right, the force between q2 and q3 is shown by the positive sign.
We must now add all the forces in order to determine the net force on q1:
Net force = F₁₂ + F₂₃
Net force ≈ -7.45 N + 33.05 N
Net force ≈ +25.6 N
for more such questions on force
https://brainly.com/question/12785175
#SPJ8
A spring stretches 0.285-m when a 0.342-kg mass is gently suspended from it as in Fig. 11–3b. The spring is then set up horizontally with the 0.402-kg mass resting on a frictionless table as in Fig. 11–5. The mass is pulled so that the spring is stretched 0.194-m from the equilibrium point, and released from rest.
Determine:
(c) the magnitude of the maximum velocity vmax.
The magnitude of the maximum velocity of the mass is 1.43 m/s.
How to explain the velocityThe maximum velocity of the mass will occur when it is at the equilibrium point. At this point, the potential energy of the spring is equal to the kinetic energy of the mass.
The potential energy of the spring is equal to one-half the spring constant times the square of the displacement of the spring, and the kinetic energy of the mass is equal to one-half the mass of the object times the square of the velocity of the mass.
We are given that the spring constant is 11.7 N/m, the displacement of the spring is 0.194 m, and the mass of the object is 0.402 kg. Substituting these values into the equation, we find that the maximum velocity of the mass is 1.43 m/s.
Therefore, the magnitude of the maximum velocity of the mass is 1.43 m/s.
Learn more about velocity on
https://brainly.com/question/24445340
#SPJ1
Seeing the light from these distant words and watching the life cycle of the universe unfold is breathtaking reminder that light is the ultimate
From the distant stars to the smallest particles, light allows us to perceive the world and unravel its mysteries. It is through light that we gather information about our surroundings, explore the cosmos, and make scientific discoveries.
Light not only illuminates our physical environment, but it also carries the stories of the past. When we look at distant objects in space, we are actually observing light that has traveled vast distances over millions or even billions of years. By analyzing the light emitted or reflected by celestial bodies, astronomers can study their composition, temperature, and movement. This information provides invaluable insights into the nature of our universe and its evolution.
Moreover, light plays a crucial role in many areas of scientific research. In fields such as optics, photonics, and quantum mechanics, scientists harness the properties of light to develop advanced technologies. From lasers to fiber optics, these innovations have revolutionized communication, medicine, and countless other industries.
Light is not only a carrier of information, but it also embodies the electromagnetic spectrum, which encompasses various types of radiation, each with its own characteristics and applications. For instance, visible light allows us to see the world around us, while infrared light reveals heat signatures and ultraviolet light exposes hidden details. X-rays and gamma rays, on the other hand, help us explore the microscopic realm and unravel the secrets of atomic and subatomic particles.
Beyond its scientific significance, light has metaphorical and symbolic meanings as well. It is often associated with knowledge, enlightenment, and wisdom. The phrase "seeing the light" is used to describe moments of realization or understanding. Light is a universal symbol of hope, guidance, and truth.
In summary, light is indeed the ultimate source of knowledge. Its ability to illuminate, reveal, and transmit information has profound implications for our understanding of the universe and our place within it. Whether we contemplate the wonders of the cosmos or appreciate the metaphorical significance of light, it remains an awe-inspiring force that continues to inspire and expand our horizons.
For more such questions on Light
https://brainly.com/question/10728818
#SPJ8
A 21.1-N force is applied to a cord wrapped around a pulley of mass M = 4.49-kg and radius R = 25.0-cm The pulley accelerates uniformly from rest to an angular speed of 25.5 rad/s in 2.31-s. If there is a frictional torque \tau = 2.80-mN at the axle,
(a) determine the moment of inertia of the pulley,
(b) determine the rough estimate of the moment of inertia.
(The pulley rotates about its center)
What is the difference be (a) and (b)?
Answer:
The difference between (a) and (b) is the deviation caused by the actual pulley not being a perfect solid disk. In (a), we took into account the additional frictional torque and calculated the more accurate moment of inertia. In (b), we made a rough estimate assuming the pulley to be a solid disk, which disregards factors such as the mass distribution and the presence of the axle. The difference between the two values is the deviation caused by these factors.
What is the result of two displacement vectors having opposite directions? Question 6 options: The resultant is the sum of the two displacements, having the same direction as the smaller vector. The resultant is the sum of the two displacements, having the same direction as the larger vector. The resultant is the difference of the two displacements, having the same direction as the smaller vector. The resultant is the difference of the two displacements, having the same direction as the larger vector.
The resultant of two displacement vectors having opposite directions is the difference of the two displacements, having the same direction as the smaller vector.
When two displacement vectors have opposite directions, it means they are pointing in opposite ways. In other words, one vector is in the opposite direction of the other. To find the resultant of these vectors, we need to subtract one vector from the other.
If we consider two displacement vectors, let's say vector A and vector B, and they have opposite directions, we can represent them as A and -B.
To find the resultant, we subtract vector B from vector A: A - (-B) or A + B.
The resultant will have the same direction as the smaller vector. This is because when we subtract a larger vector from a smaller vector, the resultant will have the direction of the smaller vector.
Therefore, the correct option is: "The resultant is the difference of the two displacements, having the same direction as the smaller vector."
For more such questions on displacement vectors.
https://brainly.com/question/30615410
#SPJ8
A freighter needs to travel up the savannah River to the port, moving against the flow of the water. if theriver flows at 3 m/s relative to the shore, and the maximum speed of the freighter relative to the river is 7 m/s, what is the maximum velocity of the freighter relative to the shore
The maximum velocity of the freighter relative to the shore is 4 m/s.
To determine the maximum velocity of the freighter relative to the shore, we need to consider the velocities of the river and the freighter separately and then combine them. Since the freighter needs to travel against the flow of the water, we subtract the velocity of the river from the maximum speed of the freighter relative to the river.
Given that the river flows at 3 m/s relative to the shore, and the maximum speed of the freighter relative to the river is 7 m/s, we can subtract the river's velocity from the maximum speed of the freighter:
Max velocity of freighter relative to shore = Max velocity of freighter relative to river - Velocity of river
Max velocity of freighter relative to shore = 7 m/s - 3 m/s
Max velocity of freighter relative to shore = 4 m/s
This means that the freighter can travel upstream at a maximum speed of 4 meters per second relative to the stationary shore while overcoming the 3 m/s current flowing downstream in the Savannah River.
for such more questions on velocity
https://brainly.com/question/80295
#SPJ8
A helicopter flies southeast with a ground of 220 km/h. If the wind speed is 32 km/h southeast, what is the air speed?
The speed of the air during the motion of the helicopter is 188 km/h.
The speed of the helicopter, v₁ = 220 km/h
The speed of wind, v₂ = 32 km/h
The speed of one moving body in comparison to another is referred to as the relative speed.
The relative speed of two bodies travelling in the same direction is determined by the speed differential between them.
The expression for the relative speed is given by,
Relative speed = v₁ - v₂
Therefore, the speed of the air is given by,
v = v₁ - v₂
v = 220 - 32
v = 188 km/h
To learn more about relative speed, click:
https://brainly.com/question/29350953
#SPJ1
Find the position and velocity of a particle at t = 1.98 s if the particle is initially moving east at a speed of 20.4 m/s and experiences an acceleration of magnitude 4.40 m/s2, directed west.
Magnitude and direction of the position.
magnitude ---blank---
direction ---Select---
Magnitude and direction of the velocity.
magnitude ---blank---
direction ---select---
To find the position and velocity of a particle at a specific time, we can use the equations of motion.
Given:
Initial velocity (u) = 20.4 m/s (east)
Acceleration (a) = -4.40 m/s² (west)
Time (t) = 1.98 s
To find the position (displacement) of the particle at time t, we can use the equation:
s = ut + (1/2)at²
s = (20.4 m/s)(1.98 s) + (1/2)(-4.40 m/s²)(1.98 s)²
s = 40.392 m + (1/2)(-4.40 m/s²)(3.9204 s²)
s = 40.392 m - 8.6914 m
s ≈ 31.7006 m
To find the velocity of the particle at time t, we can use the equation:
v = u + at
v = (20.4 m/s) + (-4.40 m/s²)(1.98 s)
v = 20.4 m/s - 8.712 m/s
v ≈ 11.688 m/s
Therefore, the velocity of the particle at t = 1.98 s is approximately 11.688 m/s to the east.
More on displacement and velocity can be found here: https://brainly.com/question/28804440
#SPJ1
HELPLP NEED FOR AN ASSIGNENT ! In the string pull illustration above, a shark on the button string results in the bottom string breaking, does this occur because of the balls weight of its mass?
Answer:
Yes, the shark's weight or mass is what causes the bottom string to break. The weight of the shark creates tension on the bottom string, which can cause it to snap if the tension becomes too great.
It is to be constructed in the shape of a hollow ring of mass 48,500 kg. The structures other than the ring shown in the figure have negligible mass compared to the ring. Members of the crew will walk on a deck formed by the inner surface of the outer cylindrical wall of the ring, with radius
r = 115 m.
The thickness of the ring is very small compared to the radius, so we can model the ring as a hoop. At rest when constructed, the ring is to be set rotating about its axis so that the people standing inside on this deck experience an effective free-fall acceleration equal to g. The rotation is achieved by firing two small rockets attached tangentially to opposite points on the rim of the ring. Your supervisor asks you to determine the following: (a) the time interval during which the rockets must be fired if each exerts a thrust of 120 N and (b) the period of rotation of the space station after it has reached its target rotation.
1. Determine the time interval (in hr) during which the rockets must be fired if each exerts a thrust of 120 N.
2. Determine the period of rotation of the space station (in s) after it has reached its target rotation.
a) Converting the time interval to hours is 0.2 hr
b) The time in seconds is 691468 sec
To determine the time interval during which the rockets must be fired, we can analyze the forces acting on the ring. The rockets provide a tangential force that causes the ring to rotate. This force creates a torque, which results in an angular acceleration. To maintain an effective free-fall acceleration equal to g, the angular acceleration should be equal to g divided by the radius of the ring.
(a) To calculate the time interval, we can use the equation:
θ = ω_i * t + (1/2) * α * t^2
where θ is the angle through which the ring rotates, ω_i is the initial angular velocity, α is the angular acceleration, and t is the time interval. Since the ring starts from rest, ω_i = 0.
The angle θ is given by:
θ = 2π
The angular acceleration α can be calculated using:
α = g / r
where g is the acceleration due to gravity and r is the radius of the ring.
Substituting the given values, we have:
2π = (1/2) * (g / r) * t^2
Solving for t, we get:
t = sqrt((4πr) / g)
Converting the time interval to hours, we divide by 3600:
t = sqrt((4πr) / g) / 3600= 0.2 hr
(b) The period of rotation can be calculated using the equation:
T = 2π / ω
where T is the period and ω is the angular velocity.
Since the angular velocity ω is related to the angular acceleration α by the equation:
ω = α * t
Substituting the values, we have:
T = 2π / (α * t)
Substituting the values of α and t, we get:
T = 2π / (g / r * sqrt((4πr) / g) / 3600)
Simplifying the expression, we have:
T = (2π * r * 3600) / sqrt(4πr * g)= 691468 sec
For more such questions on time interval visit:
https://brainly.com/question/479532
#SPJ8
The left field fence in Boston's Fenway park is known as the green monster. The wall is 11.34m high, and is located 94.5m from home plate. The average exit velocity of a ball being struck by a major-league batter is 41.0m/s.
If a batter launches the ball in a direction 30° above the horizontal, will he hit a home run? (Hint: use horizontal motion to solve for t first)
Imagine that a batter hit a ball so that it was at the peak of its trajectory when it brushed against the top of the green monster.
Find the initial y velocity (Hint: need equation that does not involve time). Find the travel time.
Use that to to find the horizontal velocity.
Use the pythagorean theorem to find the total initial velocity.
To determine whether the batter will hit a home run, we need to analyze the ball's trajectory and determine if it will clear the 11.34m high Green Monster wall.
Let's break down the problem into steps:
Step 1: Calculate the time of flight (t) for the ball's horizontal motion.
We can use the horizontal distance and the average exit velocity to find the time it takes for the ball to reach the Green Monster wall. The horizontal distance (range) can be determined using the formula:
range = horizontal velocity * time
In this case, the range is given as 94.5m, and the average exit velocity is 41.0m/s. Let's solve for time:
94.5m = (41.0m/s) * t
Simplifying the equation, we have:
t = 94.5m / 41.0m/s
t ≈ 2.31s
Step 2: Find the initial vertical velocity (Viy) at the peak of the trajectory.
Since the ball brushes against the top of the Green Monster, we can assume it reaches its peak at half of the total time of flight (t/2). The vertical motion is influenced by gravity, so the equation to determine the initial vertical velocity is:
Viy = (displacement) / (time)
In this case, the displacement is half the height of the Green Monster, which is 11.34m/2 = 5.67m. The time is half of the total time of flight:
Viy = (5.67m) / (t/2)
Viy = (5.67m) / (2.31s/2)
Viy ≈ 2.46m/s
Step 3: Calculate the horizontal velocity (Vix).
Since the horizontal motion is unaffected by gravity, the horizontal velocity remains constant throughout the ball's trajectory. We can use the horizontal distance and time of flight calculated earlier to find the horizontal velocity:
Vix = (horizontal distance) / (time)
Vix = 94.5m / 2.31s
Vix ≈ 40.95m/s
Step 4: Determine the total initial velocity (Vi) using the Pythagorean theorem.
The total initial velocity of the ball can be calculated using the horizontal and vertical velocities:
Vi = √(Vix^2 + Viy^2)
Vi = √((40.95m/s)^2 + (2.46m/s)^2)
Vi ≈ √(1676.9025m^2/s^2 + 6.0516m^2/s^2)
Vi ≈ √(1682.9541m^2/s^2)
Vi ≈ 41.02m/s
Now we have found the total initial velocity of the ball, which is approximately 41.02m/s.
To determine whether it's a home run, we need to consider the ball's trajectory and the height of the Green Monster. Since the height of the wall is 11.34m and the ball's vertical velocity is 2.46m/s, the ball will not clear the Green Monster and will not result in a home run.
Learn more about velocity on:
https://brainly.com/question/30559316
#SPJ1
Find the current flowing across the 30 Ohm resistor. I = [?] A
9.0 V 30 Ω 40 Ω 50 Ω 20 Ω 10 Ω
ANSWERED: 0.143 A
The current flowing over the 30 Ω resistor is 0.4 A.
How to solveTo discover the current streaming over the 30 Ohm resistor, able to apply Ohm's Law, which states that the current (I) is break even with to the voltage (V) partitioned by the resistance (R). In this case, the voltage over the circuit is given as 9.0 V.
To calculate the full resistance of the circuit, we ought to consider the resistors in arrangement and parallel. The resistors with values of 40 Ω and 50 Ω are in serie.
Hence, the sum of their value (R_series )= 40 Ω + 50 Ω = 90 Ω. The 20 Ω and 10 Ω resistors are in parallel, hence, their resistance is represented as (1/R_parallel) = 1/20 Ω + 1/10 Ω = 1/10 Ω. Disentangling this expression gives R_parallel = 6.67 Ω.
Presently, ready to calculate the entire resistance of the circuit. The resistors with values of 30 Ω and 90 Ω (from the arrangement combination) are in parallel, so their identical resistance is given by 1/R_total = 1/30 Ω + 1/90 Ω = 1/22.5 Ω. Rearranging this expression gives R_total = 22.5 Ω.
At last, able to apply Ohm's Law to discover the current over the 30 Ω resistor. I = V / R_total = 9.0 V / 22.5 Ω ≈ 0.4 A.
Learn more about resistors here:
https://brainly.com/question/24858512
#SPJ1
A block of wood is attached to a very lightweight metal rod, which is attached to a fixed pivot point on a table. The block is able to slide on the table with negligible friction, and the pivot is also free to rotate with negligible friction. The block's mass is M and the rod's length is ℓ. A bullet is moving parallel to the table and perpendicular to the rod when it collides and embeds within the block. The bullet's speed just before entering the block is v and its mass is m.
1. Find the angular momentum of the combined bullet–block system about the vertical pivot axis. (Use any variable or symbol stated above as necessary. Enter the magnitude.)
2. Find the fraction of the original kinetic energy of the bullet that is converted into internal energy within the bullet-block system during the collision. (Use any variable or symbol stated above as necessary.)
1. The angular momentum of the combined bullet-block system about the vertical pivot axis is 0.
2. The fraction of the original kinetic energy of the bullet converted into internal energy within the bullet-block system during the collision is given by [m * v² - (M + m) * V²] / [m * v²].
1. To find the angular momentum of the combined bullet-block system about the vertical pivot axis, we need to consider the initial and final angular momentum.
Initially, before the collision, the bullet has no angular momentum about the pivot axis since it is moving parallel to the table and perpendicular to the rod.
After the collision, when the bullet embeds within the block, the combined bullet-block system starts rotating about the pivot axis due to the conservation of angular momentum.
The angular momentum of the system can be calculated using the formula:
Angular momentum = moment of inertia × angular velocity
The moment of inertia of the system depends on the distribution of mass and the axis of rotation. Assuming the block and bullet have negligible rotational inertia compared to the rod, we can consider the moment of inertia to be that of the rod.
The moment of inertia of a rod rotating about one end (pivot) is given by:
I = (1/3) * M * ℓ²
where M is the mass of the block, and ℓ is the length of the rod.
The angular velocity (ω) can be determined by considering the conservation of angular momentum:
Initial angular momentum = Final angular momentum
0 = (1/3) * M * ℓ² * ω
Since the initial angular momentum is zero, the final angular momentum of the system is also zero.
Therefore, the angular momentum of the combined bullet-block system about the vertical pivot axis is 0.
2. To find the fraction of the original kinetic energy of the bullet that is converted into internal energy within the bullet-block system during the collision, we can use the principle of conservation of kinetic energy.
The initial kinetic energy of the bullet before the collision is given by:
Initial kinetic energy = (1/2) * m * v²
After the collision, the bullet embeds within the block, and both the bullet and the block gain internal kinetic energy due to their rotational motion.
The final kinetic energy of the bullet-block system is given by:
Final kinetic energy = (1/2) * (M + m) * V²
where V is the final velocity of the combined bullet-block system after the collision.
Since the bullet and block are now rotating about the pivot axis, part of the initial kinetic energy is converted into internal rotational kinetic energy.
The fraction of the original kinetic energy converted into internal energy can be calculated as:
Fraction of kinetic energy converted = (Initial kinetic energy - Final kinetic energy) / Initial kinetic energy
Substituting the values:
Fraction of kinetic energy converted = [(1/2) * m * v² - (1/2) * (M + m) * V²] / [(1/2) * m * v²]
Simplifying the equation, we can cancel out common terms:
Fraction of kinetic energy converted = [m * v² - (M + m) * V²] / [m * v²]
Therefore, the fraction of the original kinetic energy of the bullet converted into internal energy within the bullet-block system during the collision is given by [m * v² - (M + m) * V²] / [m * v²].
For more such questions on angular momentum visit:
https://brainly.com/question/4126751
#SPJ8
what is the pressure of a tank of uniform cross sectional area 4.0m2 when the tank is filled with water a depth of 6m when given that 1 atm=1.013 x 10^5pa density of water=1000kgm-3 g=9.8m/s2
The pressure of a tank of uniform cross-sectional area 4.0m2 when the tank is filled with water at a depth of 6m is 58800 Pa.
Pressure calculationTo find the pressure in the tank, we can use the formula for pressure:
Pressure = density x gravity x height
Density of water (ρ) = 1000 kg/m³
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) = 6 m
Thus:
Pressure = 1000 kg/m³ x 9.8 m/s² x 6 m
Pressure = 58800 kg/(m·s²)
Since the unit of pressure is Pascal (Pa), which is equivalent to kg/(m·s²), the pressure in the tank is:
Pressure = 58800 Pa
Therefore, the pressure in the tank when it is filled with water to a depth of 6 m is 58800 Pascal.
More on pressure can be found here: https://brainly.com/question/21611721
#SPJ1
please answer all the three question i am not sure of my answer i have final exam it would mean alot for u to help
Answer:
3 : Presence of a catalyst and Temperature
4 : correct, nothing needed to change
5 : Le Chatelier's principle states that when an equilibrium system is subjected to a disturbance or stress, it will undergo a shift in the direction that counteracts the impact of the stress, ultimately reestablishing a new state of equilibrium.