two astronauts are tethered together on a space walk and rotate around each other. they each weigh 69 kg and are 342 m apart. what is the period of the rotation in seconds if the tension on the cable is 133.814 n?

The symbol for "d" in Brenda's heliocentric model most likely represents the planet Mercury.

In the heliocentric model, the symbol "d" usually represents the planet Mercury because it is the planet closest to the Sun. The heliocentric model was proposed by Copernicus in the 16th century, and it states that the Sun is the center of the solar system, and all the planets revolve around it.

Brenda's diagram shows the Sun at the center, surrounded by the planets Mercury and Universe, as well as the entire solar system. Since Mercury is the planet closest to the Sun, it is most likely represented by the symbol "d" in the diagram. Overall, Brenda's heliocentric model is a simplified representation of the solar system and its components, and it helps us understand the relationships between the Sun, planets, and universe.

Learn more about heliocentric model here:

https://brainly.com/question/957540

#SPJ11

To calculate the kangaroo's vertical speed, we need to use the formula for vertical motion:

v^2 = u^2 + 2as

Where:
v = final velocity (which is zero at the highest point of the jump)
u = initial velocity (which is what we're trying to find)
a = acceleration due to gravity (-9.81 m/s^2)
s = vertical distance traveled (which is 2.10 m)

Plugging in the values, we get:

0 = u^2 + 2(-9.81)(2.10)

Simplifying:

u^2 = 41.346

Taking the square root:

u = 6.43 m/s

So the kangaroo's vertical speed when it leaves the ground is approximately 6.43 m/s.

To find how long the kangaroo is in the air, we can use the formula:

t = (v-u)/a

Where:
t = time
v = final velocity (which is zero)
u = initial velocity (which we just calculated to be 6.43 m/s)
a = acceleration due to gravity (-9.81 m/s^2)

Plugging in the values, we get:

t = (0-6.43)/(-9.81)

Simplifying:

t = 0.657 seconds

So the kangaroo is in the air for approximately 0.657 seconds.
We can use the following steps to calculate the kangaroo's vertical speed and time in the air.

Step 1: Apply the equation for maximum height:
The maximum height a projectile can reach (H) is related to its initial vertical velocity (v) and the acceleration due to gravity (g) through the following equation:
H = (v^2) / (2 * g)

Step 2: Plug in the known values:
In this case, H = 2.10 m, and g = 9.81 m/s^2 (acceleration due to gravity).

Step 3: Solve for the initial vertical velocity (v):
Rearrange the equation from Step 1 to find v:
v = sqrt(2 * H * g)
v = sqrt(2 * 2.10 m * 9.81 m/s^2)
v ≈ 6.43 m/s

Step 4: Calculate the time in the air (t):
Use the equation:
t = (2 * H) / v
t = (2 * 2.10 m) / 6.43 m/s
t ≈ 0.65 s

So, the kangaroo's vertical speed when it leaves the ground is approximately 6.43 m/s, and it is in the air for about 0.65 seconds.

To know more about speed visit

https://brainly.com/question/28224010

SPJ11

The voltage Vi across resistance R1 in the given circuit is (d) R+R.

In the circuit, the resistors R and R1 are connected in series. According to Ohm's law, the voltage across a resistor is equal to the product of the current flowing through it and its resistance.

In this case, since resistors R and R1 are in series, the current passing through both resistors is the same. Therefore, the voltage across R1 is equal to the voltage across R.

Hence, the voltage Vi across resistance R1 is the same as the voltage across R, which is represented by option (d) R+R.

To know more about voltage, refer here:

https://brainly.com/question/32002804#

#SPJ4

We can use the formula for the energy stored in a capacitor:

E = 1/2 * C * V^2

where E is the energy stored, C is the capacitance, and V is the voltage.

We can rearrange this formula to solve for V:

V = sqrt(2*E/C)

To find the voltage, we need to first calculate the energy stored in the capacitor:

E = P*t

where P is the power and t is the time duration of discharge.

Substituting the given values, we get:

E = 6500 W * 5.0 ms = 32.5 J

Now we can substitute E and C into the earlier equation to find V:

V = sqrt(2E/C) = sqrt(232.5 J / 85 μF) = 1114 V

Therefore, the capacitor is charged to 1114 volts.

Learn more about energy from

https://brainly.com/question/13881533

#SPJ11

The true statements are a) The power supply will only deliver up to 500 W of power and operate very efficiently and b) The 1000 W power supply will last longer than, for example, a 750 W power supply.

The power supply in a computer is designed to provide only the amount of power needed by the system, so in this case, it will deliver up to 500 W, even though its maximum capacity is 1000 W. This allows the power supply to operate efficiently without drawing excess power or creating an electrical hazard.

Additionally, a higher wattage power supply, like the 1000 W unit, will generally last longer because it is not being pushed to its maximum capacity, allowing for less wear and tear on the components. A power supply with a lower wattage, such as 750 W, may need to work harder to provide the necessary power, potentially reducing its lifespan.

Learn more about power supply here:

https://brainly.com/question/13179707

#SPJ11

(a) To calculate the angular acceleration of the flywheel, we can use the formula:

Angular acceleration (α) = (final angular velocity - initial angular velocity) / time

The initial angular velocity (ωi) is given as 558 rev/min, and the final angular velocity (ωf) is given as 400 rev/min. To use consistent units, we need to convert the angular velocities to radians per second (rad/s):

ωi = 558 rev/min * (2π rad/rev) * (1 min/60 s) ≈ 58.48 rad/s

ωf = 400 rev/min * (2π rad/rev) * (1 min/60 s) ≈ 41.89 rad/s

The time (t) is not given directly, but we can determine it by dividing the number of revolutions (28) by the change in angular velocity:

t = number of revolutions / (ωf - ωi)

t = 28 rev / (41.89 rad/s - 58.48 rad/s)

t = 28 rev / (-16.59 rad/s)

Since the angular acceleration (α) is defined as the change in angular velocity per unit time, we can substitute the calculated time into the formula for angular acceleration:

α = (ωf - ωi) / t

α = (41.89 rad/s - 58.48 rad/s) / (-16.59 rad/s)

Simplifying the expression, we find:

α ≈ -0.998 rad/s^2

Therefore, the angular acceleration of the flywheel is approximately -0.998 rad/s^2 (negative sign indicates deceleration).

(b) To calculate the time elapsed during the 28 revolutions, we can use the formula:

Time elapsed = number of revolutions / angular velocity

Since the number of revolutions is given as 28 and the angular velocity is calculated as ωi ≈ 58.48 rad/s, we can substitute these values into the formula:

Time elapsed = 28 rev / 58.48 rad/s

Simplifying the expression, we find:

Time elapsed ≈ 0.479 s

Therefore, approximately 0.479 seconds elapse during the 28 revolutions of the flywheel.

Learn more about angular velocity here:

https://brainly.com/question/32217742

#SPJ11

To determine the maximum constant speed at which the 2-mg car can travel over the crest of the hill without leaving the surface of the road, we need to consider the forces acting on the car.

mg = N

2mg = N

F_c = m * v^2 / r

At the crest of the hill, the car experiences two main forces: the gravitational force and the normal force.

The gravitational force, which acts vertically downward, is given by:

F_gravity = m * g

where m is the mass of the car (2 mg) and g is the acceleration due to gravity (approximately 9.8 m/s^2).

The normal force, which acts perpendicular to the surface of the road, provides the necessary centripetal force to keep the car moving in a circular path.

At the maximum speed, the centripetal force required is equal to the maximum frictional force between the car's tires and the road.

Since the car is not leaving the surface of the road, the maximum frictional force can be determined using the equation:

F_friction = μ * F_normal

where μ is the coefficient of friction between the car's tires and the road, and F_normal is the normal force.

Since the car is at the crest of the hill, the normal force is equal to the gravitational force:

F_normal = F_gravity

Therefore, the maximum frictional force is given by:

F_friction = μ * F_gravity

At the maximum speed, the centripetal force required is equal to the maximum frictional force:

F_centripetal = F_friction

We can equate the centripetal force to the maximum frictional force and solve for the maximum speed.

F_centripetal = F_friction

m * v^2 / R = μ * F_gravity

Here, R is the radius of the circular path.

Since we neglect the size of the car, we can assume it moves along a flat circular path with a radius equal to the curvature of the hill.

Now, we can solve for the maximum speed v.

v^2 = μ * R * g

Substituting the given values:

μ = coefficient of friction (not provided)

R = radius of curvature (not provided)

Unfortunately, without the values of the coefficient of friction and the radius of curvature, we cannot calculate the exact maximum speed of the car. These values are necessary to complete the calculation.

Learn more about speed here

https://brainly.com/question/13943409

#SPJ11

Answer:

The velocity is 1 m/s.

Explanation:

To learn more about velocity,

brainly.com/question/22038177

brainly.com/question/24567267

brainly.com/question/19979064

(a) To determine the depth of the chasm, we can use the equation:

depth = (1/2) * acceleration due to gravity * time^2

h = (1/2) * g * t^2

t = (3.02 s) / 2 = 1.51 s

speed of sound = distance / time

Since the pebble is dropped, the initial velocity is zero. The acceleration due to gravity is approximately 9.8 m/s^2.

Using the given time of 3.02 s, we can calculate the depth:

depth = (1/2) * 9.8 m/s^2 * (3.02 s)^2

depth ≈ 44.8 m

Therefore, the depth of the chasm is approximately 44.8 meters.

(b) To calculate the percentage of error resulting from assuming the speed of sound is infinite, we can compare the actual time for the sound to reach the rock climber with the time calculated using the assumption.

The time calculated assuming infinite speed of sound would be:

time_assumed = depth / speed of sound

Using the values obtained:

time_assumed = 44.8 m / 343 m/s ≈ 0.13 s

The percentage of error is then given by:

percentage of error = (actual time - assumed time) / actual time * 100%

percentage of error = (3.02 s - 0.13 s) / 3.02 s * 100%

percentage of error ≈ 95.7%

Therefore, assuming an infinite speed of sound would result in a percentage of error of approximately 95.7%.

Learn more about depth here

https://brainly.com/question/17123802

#SPJ11

Most communications companies prefer geostationary satellites, as they stay in the same position above the Earth, providing consistent communication coverage.

Geostationary satellites are preferred by most communication companies because they maintain a fixed position relative to the Earth's surface. Orbiting at an altitude of approximately 35,786 kilometers (22,236 miles) above the equator, these satellites have an orbital period matching the Earth's rotation.

This allows them to provide consistent coverage to a specific area, which is essential for reliable communication services such as television broadcasting, telephone services, and internet connectivity. The benefits of using geostationary satellites include their ability to cover large geographic areas, provide continuous and stable communication links, and reduce the need for multiple satellites to maintain coverage. These advantages make geostationary satellites the preferred choice for most communication companies.

Learn more about geostationary satellites here:

https://brainly.com/question/31313575

#SPJ11

The differential height of water between the two pipe sections is approximately 0.03 meters.

What is  differential height?

Differential height refers to the vertical distance or elevation change between two points or locations. It is commonly used in various fields, such as surveying, engineering, and geography, to quantify the difference in elevation between two specific points.

In surveying and engineering, differential height is often measured using leveling instruments or GPS (Global Positioning System) technology. These measurements help determine the relative height or elevation of different features on the Earth's surface, such as landmarks, buildings, terrain, or points along a surveyed route.

To determine the differential height of water, we can apply Bernoulli's equation between the two pipe sections. Assuming the air flow is steady and neglecting frictional effects, we can equate the pressures at the two sections:

P₁ + 0.5ρv₁² + ρgh₁ = P₂ + 0.5ρv₂² + ρgh₂

Since the pipe is smooth and the flow is incompressible, the velocities can be related by the continuity equation:

A₁v₁ = A₂v₂

where A₁ and A₂ are the cross-sectional areas of the pipe sections.

Given the diameters of the pipe sections, we can calculate their respective areas:

A₁ = πr₁², A₂ = πr₂²

where r₁ = 0.1 m and r₂ = 0.05 m.

Substituting these values, we can simplify the equation to:

P₁ + 0.5ρv₁² + ρgh₁ = P₂ + 0.5ρ(v₁²(r₁²/r₂²)) + ρgh₂

Since the pressure difference is measured by a water manometer, we can assume P₂ = P₁ and cancel out these terms. Rearranging the equation and solving for the differential height h₂ - h₁, we find:

h₂ - h₁ = (v₁²(r₁²/r₂²))/(2g)

Substituting the given values for v₁ (200 L/s = 0.2 m³/s) and the air density ρ (120 kg/m³), and considering g = 9.8 m/s², we can calculate:

h₂ - h₁ ≈ (0.2²(0.1²/0.05²))/(2×9.8) ≈ 0.03 m

Therefore, the differential height of water between the two pipe sections is approximately 0.03 meters.

To know more about height, refer here:

https://brainly.com/question/21649881#

#SPJ4

To find the magnitude and direction of a vector with given components, we can use the Pythagorean theorem and trigonometric functions.

x-component = -35.0 units

y-component = -60.0 units

Magnitude (|V|): The magnitude of the vector is given by the formula:

|V| = √(x^2 + y^2)

|V| = √((-35.0)^2 + (-60.0)^2)

|V| = √(1225 + 3600)

|V| = √4825

|V| ≈ 69.47 units

Direction (θ):

The direction of the vector is given by the formula:

θ = tan^(-1)(y/x)

θ = tan^(-1)(-60.0 / -35.0)

θ ≈ tan^(-1)(1.714)

θ ≈ 61.01 degrees (rounded to two decimal places)

Therefore, the magnitude of the vector is approximately 69.47 units, and the direction is approximately 61.01 degrees.

Learn more about Pythagorean here

https://brainly.com/question/4343914

#SPJ11

The maximum charge allowed on each capacitor in a series connection is equal and the total maximum charge depends on the capacitance and voltage ratings.

When capacitors are connected in series, the total capacitance decreases while the voltage rating increases. The maximum charge allowed on each capacitor is determined by the voltage rating and capacitance, and the total maximum charge depends on the sum of the capacitance and voltage ratings.

To determine the maximum charge that won't lead to breakdown, one should calculate the equivalent capacitance of the series connection and use the voltage rating of the individual capacitors. If the charge on any one capacitor exceeds the maximum allowed, it can lead to a breakdown and the release of a high amount of energy.

Therefore, it is crucial to ensure that the maximum charge on each capacitor is within the safe limits to avoid any damage or failure of the circuit.

Learn more about capacitance here:

https://brainly.com/question/14746225

#SPJ11

the P-value (0.052) is greater than the alpha level (0.01), we fail to reject the null hypothesis. This means that there is not enough evidence to support the claim that the mean height of the sample of 30 five-year-olds from the city is significantly greater than the mean height of all five-year-olds.

First, let's define some terms. The distribution of the heights of five-year-old children refers to the range of possible heights that five-year-olds can have. The mean of this distribution is the average height of all five-year-olds in a certain population. In this case, the mean is 42.5 inches. A pediatrician believes that the children in a certain city are taller on average than this mean. To test this hypothesis, the pediatrician takes a random sample of 30 five-year-olds from the city and measures their heights. The mean height of this sample is 43.6 inches, with a standard deviation of 3.6 inches.

To determine if the pediatrician's belief is statistically significant, they conduct a one-sample t-test. A t-test is a statistical test used to determine if there is a significant difference between the means of two groups. In this case, the two groups are the population of all five-year-olds and the sample of 30 five-year-olds from the city.

The t-test generates a P-value, which represents the probability of obtaining a result as extreme or more extreme than the observed result, assuming that the null hypothesis is true. The null hypothesis in this case is that there is no significant difference between the mean height of all five-year-olds and the mean height of the sample of 30 five-year-olds from the city. The alternative hypothesis is that the mean height of the sample of 30 five-year-olds from the city is significantly greater than the mean height of all five-year-olds.

The P-value for this test is 0.052. This means that there is a 5.2% chance of obtaining a result as extreme or more extreme than the observed result, assuming that the null hypothesis is true.

To know more about probability visit:-

https://brainly.com/question/31828911

#SPJ11

To find the density of the metal, we first need to find its volume. The cube originally had a volume of 6.0 cm x 6.0 cm x 6.0 cm = 216.0 cubic centimeters. When we drill a hole through it with a diameter of 3.0 cm, that leaves a cylindrical hole with a radius of 1.5 cm and a height of 6.0 cm. The volume of the hole can be calculated as follows:

V_hole = π x r^2 x h

= π x (1.5 cm)^2 x 6.0 cm

= 42.4 cubic centimeters

The remaining metal in the cube has a volume of:

V_metal = V_cube - V_hole

= 216.0 cubic centimeters - 42.4 cubic centimeters

= 173.6 cubic centimeters

Now we can calculate the density of the metal:

density = mass / volume

We're given that the weight of the cube is 6.60 N, but we need to convert that to mass in kilograms. We can use the acceleration due to gravity, g = 9.81 m/s^2, to do this:

weight = mass x g

6.60 N = mass x 9.81 m/s^2

mass = 0.671 kg

Therefore, the density of the metal is:

ρ = mass / volume

= 0.671 kg / 173.6 cm^3

= 0.00387 kg/cm^3

So the density of the metal is 0.00387 kg/cm^3.

To find the weight of the cube before drilling the hole, we can use the density we just calculated to find its mass, and then use that to find its weight. The volume of the cube is still 216.0 cubic centimeters, so its mass is:

mass = density x volume

= 0.00387 kg/cm^3 x 216.0 cm^3

= 0.835 kg

To find the weight, we can once again use the acceleration due to gravity:

weight = mass x g

= 0.835 kg x 9.81 m/s^2

= 8.19 N

So the cube weighed 8.19 N before the hole was drilled in it.

Learn more about weighed from

https://brainly.com/question/86444

#SPJ11

The horizontal component of the velocity of the vehicle from which the radar waves were reflected is approximately -31.83 m/s.

To determine the horizontal component of the velocity of the vehicle, we can use the Doppler effect equation:

Δf/f = (v/c) * cosθ

Where:

Δf is the change in frequency (16 kHz),

f is the original frequency (100 GHz),

v is the velocity of the vehicle,

c is the speed of light (3 x 10^8 m/s),

θ is the angle between the direction of motion and the direction of the radar waves (assumed to be 0° in this case).

Rearranging the equation to solve for v:

v = (Δf/f) * (c / cosθ)

Substituting the given values:

v = (16 kHz / 100 GHz) * (3 x 10^8 m/s / cos0°)

Since cos0° = 1, we can simplify the equation:

v = (16 x 10^3) * (3 x 10^8) / (100 x 10^9)

Calculating the result:

v ≈ -31.83 m/s

The horizontal component of the velocity of the vehicle from which the radar waves were reflected is approximately -31.83 m/s. The negative sign indicates that the vehicle is moving in the opposite direction of the radar waves.

To know more about velocity, visit :

https://brainly.com/question/30559316

#SPJ11

At absolute zero temperature (T=0K), according to the Fermi-Dirac distribution, the probability (f) of finding an electron with energy greater than the Fermi energy (E) is zero. This means that there are no available energy states for electrons above the Fermi energy at absolute zero temperature.

The Fermi-Dirac distribution is a quantum mechanical distribution that describes the occupancy of energy states by fermions, such as electrons. It takes into account the Pauli exclusion principle, which states that no two identical fermions can occupy the same quantum state simultaneously.

At T=0K, all available energy states up to the Fermi energy are filled by electrons, and no electrons can occupy energy states above the Fermi energy. Therefore, the value of the Fermi-Dirac distribution for energies greater than the Fermi energy at T=0K is zero.

learn more about "temperature":- https://brainly.com/question/27944554

#SPJ11

(a) To find the frequency of the simple pendulum, we can use the formula:

frequency (f) = 1 / period (T)

period (T) = 2π √(L / g)

Length of the pendulum (L) = 0.760 m

Acceleration due to gravity (g) = 9.8 m/s^2

T = 2π √(0.760 / 9.8)

The period of a simple pendulum can be calculated using the formula:

period (T) = 2π √(L / g)

where L is the length of the pendulum and g is the acceleration due to gravity.

Length of the pendulum (L) = 0.760 m

Acceleration due to gravity (g) = 9.8 m/s^2

First, let's calculate the period of the pendulum: T = 2π √(0.760 / 9.8)

Now we can find the frequency: f = 1 / T

(b) To find the speed of the pendulum bob at the lowest point of the swing, we can use the equation for the speed of an object in simple harmonic motion: speed (v) = √(2gh)

where h is the vertical distance from the highest point to the lowest point of the swing.

Given: Angle to the vertical (θ) = 12 degrees

To find h, we can use trigonometry: h = L - L cos(θ)

(c) To find the total energy stored in the oscillation, assuming no losses, we can use the equation: total energy = potential energy + kinetic energy

The potential energy of the pendulum bob at the highest point is given by: potential energy = mgh

where m is the mass of the bob and h is the vertical distance from the highest point to the lowest point.

The kinetic energy of the pendulum bob at the lowest point is given by:

kinetic energy = (1/2)mv^2

where m is the mass of the bob and v is the speed at the lowest point.

Given: Mass of the pendulum bob (m) = 365 grams

Now we can calculate the potential energy and kinetic energy, and then find the total energy.

Please provide the value of g (acceleration due to gravity) so I can proceed with the calculations.

Learn more about frequency here

https://brainly.com/question/254161

#SPJ11

The specific heat of a substance is defined as the amount of heat required to raise the temperature of a unit mass of the substance by one degree Celsius. To calculate the specific heat of the metal, we can use the formula:

Heat absorbed (Q) = mass (m) * specific heat (c) * change in temperature (ΔT).

Given that the mass (m) of the metal is 18.4 g, the change in temperature (ΔT) is (53.5°C - 21.7°C) = 31.8°C, and the heat absorbed (Q) is 262 J, we can rearrange the formula to solve for the specific heat (c):

c = Q / (m * ΔT).

Substituting the given values, we have:

c = 262 J / (18.4 g * 31.8°C).

Note that the unit of mass must be converted to kilograms (kg) and the unit of temperature to Kelvin (K) for consistency:

c = 262 J / (0.0184 kg * 31.8 K).

Calculating this expression, we find:

c ≈ 454.97 J/(kg·K).

Therefore, the specific heat of the metal is approximately 454.97 J/(kg·K).

Hence, the specific heat of the metal is 454.97 J/(kg·K).

Learn more about specific heat here:

https://brainly.com/question/31608647

#SPJ11

To find the Fahrenheit temperature that is five times the Celsius temperature, we need to use the conversion formulas between Celsius and Fahrenheit. The formula to convert Celsius to Fahrenheit is F = 1.8C + 32, where F is the Fahrenheit temperature and C is the Celsius temperature.

To find the temperature where Fahrenheit is five times Celsius, we can set up the equation:

5C = F

Substituting the Fahrenheit conversion formula for F, we get:

5C = 1.8C + 32

Simplifying this equation, we can solve for C:

3.2C = 32

C = 10

So the Celsius temperature is 10 degrees. To find the Fahrenheit temperature, we can plug in C = 10 into the Fahrenheit conversion formula:

F = 1.8(10) + 32

F = 50

Therefore, the Fahrenheit temperature that is five times the Celsius temperature is 50 degrees Fahrenheit.
Fahrenheit temperature that is 5 times the Celsius temperature, we can use the formula relating Fahrenheit and Celsius temperatures:

F = (9/5)C + 32

We're looking for a situation where F = 5C, so let's set up an equation:

5C = (9/5)C + 32

Now, let's solve for C:

5C - (9/5)C = 32
(16/5)C = 32

Divide both sides by 16/5:

C = (32 * 5) / 16
C = 10

Now that we have the Celsius temperature, let's convert it back to Fahrenheit using the original formula:

F = (9/5) * 10 + 32
F = 18 + 32
F = 50

So, the Fahrenheit temperature is 5 times the Celsius temperature when it is 50°F (10°C).

To know more about Fahrenheit to Celsius conversion visit

https://brainly.com/question/4412213

SPJ11

The best cοlοr οf safety light tο use in a darkrοοm wοuld be red light.

Red light has the lοwest energy amοng visible light cοlοrs. It has a lοnger wavelength and lοwer frequency cοmpared tο οther visible light cοlοrs such as blue οr green.

Using lοw-energy red light in the darkrοοm helps tο minimize the risk οf expοsing light-sensitive materials, such as phοtοgraphic film οr light-sensitive chemicals, tο high-energy phοtοns that cοuld pοtentially cause unwanted reactiοns οr fοgging. Red light prοvides sufficient illuminatiοn fοr wοrking in the darkrοοm while minimizing the pοtential fοr light damage.

Therefοre, a phοtοgrapher wοuld typically chοοse a safety light that emits lοw-energy red phοtοns fοr use in a darkrοοm.

To learn more about Red light, visit.

https://brainly.com/question/13032688

#SPJ4

The acceleration of the body is 12 meters per second squared m/[tex]s^2[/tex].

Acceleration is a measure of the rate of change in velocity. In the given problem, the body's velocity changes from 80 m/s to 200 m/s in 10 seconds.

To find the acceleration, we can use the below formula:

Acceleration = (Final Velocity - Initial Velocity) / Time

Substituting the given values :

Acceleration = (200 m/s - 80 m/s) / 10 seconds

Simplifying this equation:

Acceleration = 120 m/s / 10 seconds

Finally:

Acceleration = 12 m/[tex]s^2[/tex]

Therefore, the acceleration of the body is 12 meters per second squared m/[tex]s^2[/tex].

To learn more about acceleration ,

https://brainly.com/question/12550364

Two sources of error are human error and instrument error. The more accurate method for measuring velocity is laser Doppler velocimetry, while the more precise method is the ultrasonic anemometer.

Human error includes mistakes in recording or reading data, while instrument error involves limitations or inaccuracies of the measuring device. There are various methods for measuring velocity, but laser Doppler velocimetry is considered more accurate due to its non-intrusive nature and ability to measure without disturbing the flow.

Ultrasonic anemometers, on the other hand, are known for their high precision as they can measure small changes in velocity with great sensitivity. However, they may not be as accurate overall as laser Doppler velocimetry. It's important to choose the appropriate method based on the specific needs and requirements of the task at hand.

Learn more about anemometer here:

https://brainly.com/question/1380217

#SPJ11

The linear momentum of the high-energy electron is 4.97 x 10^-23 kg m/s.

The formula for the momentum of an object is p = mv, where p is momentum, m is mass, and v is velocity. Since we are dealing with an electron, we can assume that its mass is 9.11 x 10^-31 kg.
We can use the equation for centripetal force to find the velocity of the electron:

F = mv^2/r = qvB,

where F is the force, q is the charge of the electron, B is the magnetic field, and r is the radius of the circle.

Solving for v,

we get v = sqrt(qBr/m).
Plugging in the given values,

we get

v = sqrt((1.6 x 10^-19 C)(5.00 T)(0.06 m) / (9.11 x 10^-31 kg))

v = 5.46 x 10^7 m/s.
Now we can use the formula for momentum to find the linear momentum of the electron:

p = mv

p = (9.11 x 10^-31 kg)(5.46 x 10^7 m/s)

p = 4.97 x 10^-23 kg m/s.
To know more about linear momentum, visit:

https://brainly.com/question/30754592

#SPJ11

If an electron travels 0.200 m from an electron gun to a TV screen in 12.0 ns, 728V voltage was used to accelerate it

Define voltage

When charged electrons (current) are forced through a conducting loop by the pressure of an electrical circuit's power source, they can perform tasks like lighting a lamp. In a nutshell, voltage is equal to pressure and is expressed in volts (V).

d = 0.20 m time,

t = 12 ns = 12*10^-9 s

Velocity of electron, v = d/t

                                    c 0.2/(12*10^-9)

                                   = 16666666.667 m/s

eV = 1/2mv^2

V = 1/2mv^2/e

V =( [1/2] 9.1*10^-31 *[16*10^6]^2 )/1.6*10^-19

V  = 728V

To learn more about voltage :

https://brainly.com/question/1176850

#SPJ4

The speed οf the rοd is apprοximately 16.5 meters per secοnd.

In everyday use and in kinematics, the speed (cοmmοnly referred tο as v) οf an οbject is the magnitude οf the change οf its pοsitiοn οver time οr the magnitude οf the change οf its pοsitiοn per unit οf time; it is thus a scalar quantity.

The rate οf change οf pοsitiοn οf an οbject in any directiοn. Speed is measured as the ratiο οf distance tο the time in which the distance was cοvered. Speed is a scalar quantity as it has οnly directiοn and nο magnitude.

We can use the fοrmula fοr the induced vοltage in a cοnductοr mοving thrοugh a magnetic field.

The induced vοltage (V) can be calculated using the fοrmula:

V = B * l * v

where:

V is the induced vοltage,

B is the magnetic field strength,

l is the length οf the cοnductοr, and

v is the velοcity οf the cοnductοr.

Rearranging the fοrmula tο sοlve fοr v:

v = V / (B * l)

Substituting the given values:

v = (6.1 V) / (770 x 10^(-4) T * 0.47 m)

Simplifying:

v ≈ 16.5 m/s

Therefοre, the speed οf the rοd is apprοximately 16.5 meters per secοnd.

To learn more about speed , visit.

brainly.com/question/13921605

#SPJ4

When polarized light passes through a polarization filter, the intensity of the light transmitted depends on the angle between the direction of polarization of the incident light and the axis of polarization of the filter. The intensity of the transmitted light is given by Malus's law,

I = I₀ cos²θ

where I₀ is the intensity of the incident light and θ is the angle between the direction of polarization of the incident light and the axis of polarization of the filter.

To reduce the incident light intensity by 66.3%, we need to find the angle θ such that the transmitted intensity is 33.7% of the incident intensity. Let I = 0.337I₀, then

0.337I₀ = I₀ cos²θ

cos²θ = 0.337

Taking the square root of both sides, we get

cosθ = ±0.58

Since the angle θ must be between 0° and 90°, the only solution is

θ = arccos(0.58) ≈ 54.1°

Therefore, an angle of approximately 54.1 degrees is needed between the direction of polarized light and the axis of the polarization filter to reduce the incident light intensity by 66.3%.

Learn more about direction of polarization of the incident light   from

https://brainly.com/question/5095829

#SPJ11

When considering the amount of time it took for the glove to stop the ball, we can determine the magnitude of the net force on the ball while it is in the glove by using the equation

Fnet = mΔv/Δt, where Fnet is the net force, m is the mass of the ball, Δv is the change in velocity of the ball, and Δt is the time it took for the ball to come to a stop.

Let's assume that the ball has a mass of 0.2 kg and was moving at a velocity of 5 m/s before it was caught by the glove. If it took 0.1 seconds for the ball to come to a complete stop within the glove, we can find the magnitude of the net force on the ball while it is in the glove as follows:

Fnet = mΔv/Δt

Fnet = 0.2 kg x (-5 m/s)/0.1 s

Fnet = -10 N

The negative sign indicates that the direction of the net force is opposite to the direction of the ball's motion.

Therefore, the magnitude of the net force on the ball while it is in the glove is 10 N.

To know more about net force visit:

https://brainly.com/question/14361879

#SPJ11

The moment of inertia about the rotation axis for the given playground toy, with two children sitting opposite each other, is approximately 145.35 kg·m².

To determine the moment of inertia about the rotation axis for the given playground toy, we need to consider the contributions from the seats and the two children.

Given:

Mass of each seat = 6.4 kg

Length of the rods (r) = 1.5 m

Mass of the first child (m₁)= 16 kg

Mass of the second child (m₂) = 23 kg

The moment of inertia of each seat can be calculated using the formula for the moment of inertia of a point mass about an axis:

[tex]I_{seat} = m_{seat times} r^2[/tex]

For each seat, the moment of inertia is:

[tex]I_{seat} = 6.4 kg times (1.5 m)^2= 14.4 kg\cdot m^2[/tex]

Now, to calculate the moment of inertia contributed by the children, we need to consider that the children are located opposite each other. Assuming the axis of rotation passes through the center of mass of the children-seats system, the moment of inertia for each child is:

[tex]I_{child} = m_{child times} r^2[/tex]

For the first child (m₁):

[tex]I_1 = 16 kg times (1.5 m)^2 = 36 kgm^2[/tex]

For the second child (m₂):

[tex]I_2 = 23 kg times (1.5 m)^2 = 51.75 kgm^2[/tex]

Finally, we can calculate the total moment of inertia by summing the contributions from the seats and the children:

Total moment of inertia =[tex]4 times I_{seat} + I_1 + I_2[/tex]

= [tex]4 times (14.4 kgm^2) + 36 kgm^2 + 51.75 kgm^2[/tex]

= [tex]57.6 kgm^2 + 36 kgm^2 + 51.75 kgm^2[/tex]

= [tex]145.35 kgm^2[/tex]

Learn more about the calculation of the moment of inertia here:

https://brainly.com/question/30051108

#SPJ4