The force that made Rick Lieberman's plane to make an emergency landing is b. severe turbulence.
Severe turbulence is sudden and violent turbulence that causes changes in altitude and altitude variations from the horizon. Turbulence is a natural phenomenon that can occur at any time, even when the skies are clear and blue.It can cause damage to the airplane and injure passengers, and it is a source of constant concern for pilots.
Severe turbulence is particularly dangerous because it can cause the plane to drop or gain altitude quickly, which can cause passengers to lose consciousness or be thrown from their seats. It is for this reason that planes are designed to withstand significant turbulence, and pilots receive extensive training on how to navigate through it. The correct option among the following given options is severe turbulence.
Learn more about turbulence at:
https://brainly.com/question/28102157
#SPJ11
a 3.2 hz continuous wave travels on a slinky. if the wavelength is 0.47 m, what is the speed of waves on the slinky (in m/s)?
The wave's speed on the slinky is 1.504 m/s
The speed of the wave on the slinky is 3.2 meters per second. This is calculated by dividing the frequency of the wave (3.2 Hz) by the wavelength of the wave (0.47 m). The speed of the wave on the slinky is an important factor to consider when studying wave motion and behavior on a slinky. The speed of the wave determines how quickly it can move along the slinky, and it will have an effect on the wave's properties, such as its amplitude, frequency, and wavelength.
The wave's speed on the slinky (in m/s) is 1.504 m/s. The slinky's wavelength is 0.47 m. Continuous waves travel at a frequency of 3.2 Hz on the slinky. The following formula can be used to determine the wave speed: Wave speed = Frequency x Wavelength.
The following formula can be used to calculate wave speed in general:
Wave speed = Distance/time
Let us now use the first formula to solve the question:
Wave speed = Frequency x Wavelength
Wave speed = 3.2 Hz x 0.47 m
Wave speed = 1.504 m/s
Therefore, the wave's speed on the slinky is 1.504 m/s.
Know more about wave's speed here:
https://brainly.com/question/3148541
#SPJ11
how does the capacitance of two identical capacitors connected in parallel compare to that of one of the capacitors?
The capacitance of two identical capacitors connected in parallel is double that of one of the capacitors because the equivalent capacitance of two capacitors in parallel is equal to the sum of the individual capacitances.
Therefore, when two identical capacitors are connected in parallel, the total capacitance is twice that of one of the capacitors.
The capacitance of two identical capacitors connected in parallel is equal to the sum of the capacitances of the two individual capacitors. In other words, the capacitance of two capacitors connected in parallel is double the capacitance of one of the capacitors.
Explanation: Capacitance is the amount of electrical charge stored per unit of voltage applied to a conductor. When two capacitors are connected in parallel, the two plates of each capacitor become connected, creating a single plate with twice the area of a single capacitor. This means that the capacitance of two identical capacitors connected in parallel is double the capacitance of one of the capacitors.
Formula: The formula for the capacitance of two capacitors in parallel is given by: Ctotal = C1 + C2, where Ctotal is the total capacitance of the two capacitors connected in parallel and C1 and C2 are the capacitances of the two individual capacitors.
Example: if the capacitance of one capacitor is 10μF, then the total capacitance of two capacitors connected in parallel is 20μF.
For more related questions capacitance.
https://brainly.com/question/28445252
#SPJ11
tides are caused by gravitational interactions between the earth, sun, and moon lesson 3.03 question 1 options: true false
The statement "tides are caused by gravitational interactions between the earth, sun, and moon" is true.
Tides are defined as the rise and fall of sea levels caused by the combined effects of gravitational forces exerted by the Moon, Sun, and the rotation of the Earth. The Earth's water surface is continuously pulled towards the Moon, and this results in two bulges of water on opposite sides of the Earth, resulting in high tide.
On the other hand, low tide occurs between the two high tides, where the water level is at its lowest point. The Sun, even though it is 93 million miles away from the Earth, exerts a gravitational force on it. The gravitational force exerted by the Sun on the Earth is about 177 times weaker than that exerted by the Moon.
However, when the Sun, Earth, and the Moon line up, their combined gravitational force results in higher-than-normal tides called Spring Tides, and when they are at right angles to each other, they produce lower-than-normal tides called Neap Tides.
Therefore, Tides are caused by the gravitational pull of the sun and moon on the Earth's oceans, which creates a bulge of water that rises and falls twice a day.
To know more about high tides click here:
https://brainly.com/question/14683300
#SPJ11
a box is given a push so that it slides across the floor. part a how far will it go, given that the coefficient of kinetic friction is 0.24 and the push imparts an initial speed of 3.9 m/s ?
Given that the coefficient of kinetic friction is 0.24 and the push imparts an initial speed of 3.9 m/s, then the box will go as far as 3.23 meters before coming to a stop
The distance traveled by the box is determined by the force of friction and the initial velocity. Assuming that the box is sliding horizontally on a flat surface, we can use the following equation:
d = (v₀² / 2μg)
where d is the distance traveled by the box, v₀ is the initial velocity of the box, μ is the coefficient of kinetic friction, and g is the acceleration due to gravity (9.81 m/s²).
Plugging in the values given in the problem, we get:
d = (3.9² / 2×0.24×9.81) = 3.23 meters
Therefore, the box will travel a distance of approximately 3.23 meters before coming to a stop due to the frictional force acting on it.
Learn more about coefficient of kinetic friction here: https://brainly.com/question/20241845.
#SPJ11
What layer of earth can you see through a open hole?
Answer:
The mantle is exposed in place of Earth’s missing crust.
Explanation:
a firefighter of mass 30 kg slides down a vertical pole with an acceleration of 5m/s^2. what is the net force acting on him?
The net force acting on the firefighter is 30 kg × 9.8 m/s2 + 4.8 m/s2 = 148 N.
The net force acting on the firefighter of mass 30 kg is the sum of all forces acting on him,
which is equal to the mass of the firefighter multiplied by the acceleration due to gravity plus the frictional force between the pole and the firefighter.
The net force on the firefighter can be calculated using the following equation:
Net force = mass × acceleration due to gravity + frictional force
Net force = 30 kg × 9.8 m/s2 + frictional force
Since the firefighter is accelerating at 5 m/s2, subtract the frictional force from the acceleration due to gravity (9.8 m/s2):
Frictional force = 9.8 m/s2 - 5 m/s2 = 4.8 m/s2
Therefore, the net force acting on the firefighter is 30 kg × 9.8 m/s2 + 4.8 m/s2 = 148 N.
This net force is made up of the gravitational force of 30 kg × 9.8 m/s2 and the frictional force of 4.8 m/s2.
This frictional force allows the firefighter to move down the pole at an accelerating rate of 5 m/s2. Without this frictional force, the firefighter would not move.
The net force acting on the firefighter is 148 N, which is equal to the mass of the firefighter multiplied by the acceleration due to gravity plus the frictional force between the pole and the firefighter.
to know more about Force refer here:
https://brainly.com/question/13191643#
#SPJ11
the law requires you to even when you don't see any cars around. a. turn b. signal c. stop
The law requires you to signal even when you don't see any cars around. This is because signaling provides a visual warning to other drivers or pedestrians that you are about to make a turn or change lanes.
When driving, it is important to signal before making any maneuver to ensure the safety of yourself and others.
When you are driving and you plan to turn or change lanes, you should use the proper hand signals.
To turn left, you should point your left arm out of the window and bend your elbow at a 90-degree angle, with your palm facing forward.
To turn right, you should point your right arm out of the window and bend your elbow at a 90-degree angle, with your palm facing down.
To indicate that you are slowing down or stopping, you should wave your arm up and down.
By signaling your intentions to other drivers, you are allowing them to adjust their speed accordingly. This helps to prevent accidents and keeps traffic flowing smoothly.
Signaling also helps to prevent road rage since drivers can easily anticipate what the other drivers are doing.
Signaling is also important when you are exiting the roadway. If you are turning right, you should indicate your intention to exit the roadway by raising your arm and pointing in the direction of the exit.
This will alert drivers behind you that you are about to leave the roadway and will give them time to adjust their speed.
Signaling is an important part of driving that helps to promote safety on the road. By following the proper hand signals, you can let other drivers know where you are going and help to prevent accidents.
to know more about signal refer here:
https://brainly.com/question/16248997#
#SPJ11
lo4 pos what advantages does the hubble space telescope (hst) have over ground-based telescopes? list some disadvantages
The Hubble Space Telescope offers clear and stable views of the cosmos without atmospheric distortion but has disadvantages including aging infrastructure, limited sensitivity to certain wavelengths, and difficulty with maintenance.
Advantages of Hubble Space Telescope:
Clearer and more stable view of the cosmos, and its sensitivity to a wider range of light. Not affected by atmospheric distortions.It can see far more clearly than a ground-based telescope.The following are the disadvantages of the Hubble Space Telescope:
Aging infrastructure, which has resulted in frequent maintenance and repairs. Its sensitivity to UV and IR radiation was also limited by its design. Not as easy to maintain as ground-based telescopes. The HST's images are often subject to light pollution, which can make it difficult to see faint objects.While the Hubble Space Telescope has revolutionized astronomy and made many groundbreaking discoveries, it also faces challenges and limitations that must be addressed as new space-based observatories are developed to continue advancing our understanding of the universe.
To know more about Hubble Space Telescope click here:
https://brainly.com/question/30246219
#SPJ11
Suppose you were to compare three stars with the same surface temperature. If star A is a giant star, star B is a supergiant star, and star C is a main sequence star, order the three stars in terms of increasing radius. a. Star C, Star A, Star B b. Star B, Star A, Star C c. Star A, Star C, Star B d. Star B, Star C, Star A
If star A is a giant star, star B is a supergiant star, and star C is a main sequence star, the order of the three stars in terms of increasing radius is Star A, Star C, Star B.
A giant star is a luminous star that is considerably larger and brighter than the sun. The distinction between giant and dwarf stars is primarily determined by their luminosity, and giant stars are more luminous. They are not, however, larger in diameter than dwarf stars. Their size is the outcome of a high luminosity-to-mass ratio.
A supergiant star is a massive star with a luminosity that is many times greater than that of a giant star. As a result, a supergiant star is much larger than a giant star. However, supergiant stars have a similar surface temperature as giant stars.
Sequence stars are stars that spend most of their lives in the primary sequence of stars. A main-sequence star is a star that is in the hydrogen-burning phase of its evolution. It is in a state of hydrostatic equilibrium, meaning that the gravitational force holding the star together is balanced by the pressure generated by the thermonuclear fusion taking place in its core.
The stars will have the following order in terms of increasing radius: Star A, Star C, Star B if star A is a giant star, star B is a supergiant star, and star C is a main sequence star, and they all have the same surface temperature.
To learn more about surface temperature of stars https://brainly.com/question/31116168
#SPJ11
a constant force is applied to an object, causing the object to accelerate at 7.50 m/s2 . what will the acceleration be if the force is doubled and the object's mass is halved?
The acceleration be if the force is doubled and the object's mass is halved when a constant force is applied to an object, causing the object to accelerate at 7.50 m/s² is 30.00 m/s².
Therefore Newton's Second Law of Motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. It can be expressed mathematically as follows:
[tex]F=ma[/tex]
where F is the force applied to the object,
m is its mass, and
a is its acceleration.
Given that the initial force on the object causes an acceleration of 7.50 m/s²,
we can write it as
[tex]F = m*a_{1}[/tex]
where F1 is the initial force applied,
[tex]a_{1}[/tex] is the initial acceleration, and
m is the mass of the object.
We can rearrange the terms and write it as
[tex]\frac{F}{m}=a_{1}[/tex]
[tex]\frac{F}{m}=7.50[/tex] m/s²
Now, if the force is doubled and the mass is halved, the equation becomes:
[tex]2F = \frac{1}{2}m[/tex]
where 2F is the new force,
[tex]a_{2}[/tex] is the new acceleration, and
[tex]\frac{1}{2}m[/tex] is the new mass.
We can also write above equation as
[tex](\frac{4F}{m})=a_{2}[/tex]
Substituting the value of [tex]\frac{F}{m}[/tex] as 7.50 m/s²
Simplifying this equation, we can solve for a₂:
[tex]a_{2}=4*a_{1}[/tex]
[tex]a_{2}=4*7.50[/tex]
[tex]a_{2}=30.00[/tex] m/s²
Therefore, if the force is doubled and the object's mass is halved, the acceleration of the object will be four times the initial acceleration, or 30.00 m/s².
To understand more about acceleration:
https://brainly.com/question/460763
#SPJ11
if the flashlight were the sun and the paper were the beach, what orientation would feel warmest? explain.
If the flashlight were the sun, the paper would be the beach, and the beach would be facing the flashlight, then the side of the beach closest to the flashlight would be the warmest. This is because the sun radiates the most light and heat in the direction that it is facing.
If the flashlight were the sun and the paper were the beach, the orientation that would feel the warmest would be when the flashlight is directly overhead, shining down onto the paper. This would represent the position of the sun at high noon on a sunny day.
At this time, the sun's rays would be shining almost directly down onto the beach, providing the most direct and intense heat. The other orientations would not be as warm because the sun's rays would be more indirect and spread out, making them less intense and providing less heat.
The paper would absorb more heat and light on the side facing the flashlight, while the side facing away from the flashlight would remain cooler.
For more such questions on flashlight , Visit:
https://brainly.com/question/4026955
#SPJ11
water flows with constant speed through a garden hose that goes up a step 20.0 cm high. if the water pressure is 143 kpa at the bottom of the step, what is its pressure at the top of the step?
The pressure at the top of the step is 339 kPa.
We can use the principle of conservation of energy to solve this problem. The total energy of the water at any point along the hose can be expressed as the sum of its potential energy and kinetic energy. Since the water flows with constant speed, its kinetic energy remains constant throughout the hose. Thus, any change in energy must be due to a change in potential energy.
At the bottom of the step, the pressure is given as P1 = 143 kPa. Let's assume that the cross-sectional area of the hose remains constant throughout, so that the volume of water flowing per unit time remains constant as well. Let V be the volume of water flowing per unit time, and let A be the cross-sectional area of the hose. Then, the speed of the water is given by v = V/A.
As the water flows up the step, it gains potential energy due to its increase in height. The increase in potential energy per unit volume of water is given by the product of the height difference and the density of water (ρ = 1000 kg/m³) multiplied by the gravitational acceleration (g = 9.8 m/s²): ΔU/V = ρgh.
Let P2 be the pressure at the top of the step, and let h = 0.2 m be the height of the step. Then, the pressure difference between the top and bottom of the step is given by ΔP = P2 - P1, and the change in potential energy per unit volume of water is ΔU/V = ρgh. Therefore, using the principle of conservation of energy, we have:
1/2 ρv² + P1 = 1/2 ρv² + P2 + ρgh
Simplifying and solving for P2, we get:
P2 = P1 + ρgh
Plugging in the given values, we get:
P2 = 143 kPa + (1000 kg/m³)(9.8 m/s²)(0.2 m) = 143 kPa + 196 kPa = 339 kPa
Therefore, the pressure is 339 kPa.
Learn more about Pressure in this link: https://brainly.com/question/12971272
#SPJ11
the sound level measured in a room by a person watching a movie on a home theater system varies from 60 db during a quiet part to 90 db during a loud part. approximately how many times louder is the latter sound?
The loud part is approximately 1000 times louder than the quiet part. The sound level measured in a room by a person watching a movie on a home theater system varies from 60 db during a quiet part to 90 db during a loud part.
To calculate approximately how many times louder the latter sound is, we can use the formula: Decibels = 10 log (I/I0) Where I is the sound intensity and I0 is the reference intensity ([tex]10^{-12} W/m^2[/tex]). We know that the sound level at the quiet part is 60 dB and the sound level at the loud part is 90 dB.
So, using the formula above, we can calculate the intensity ratio as follows: Intensity ratio = I_loud/I_quiet= [tex]10^{(90/10)}[/tex]/ [tex]10^{(60/10)}[/tex]= [tex]10^9[/tex]/[tex]10^6[/tex]= 1000. The intensity ratio of the loud part to the quiet part is 1000. This means that the loud part is approximately 1000 times louder than the quiet part. The answer is 1000 times louder than the quiet part.
Learn more about intensity : https://brainly.com/question/17062836
#SPJ11
you are standing on a scale in an elevator. suddenly you notice your weight increases. what do you conclude?
When standing on a scale in an elevator, if one notices an increase in their weight, it means that: the elevator is accelerating upwards.
This is due to the fact that the scale underfoot has to counter the upward acceleration of the elevator, which causes the weight measured on the scale to increase. The scale measures the normal force, which is the weight being exerted on the scale, which is equal to the mass of the individual multiplied by the gravitational acceleration on the surface of the earth.
This can be represented by the formula: W = mg,
where W is the weight, m is the mass of the object and g is the gravitational acceleration.
When the elevator is stationary or moving at a constant velocity, the gravitational acceleration is the same as the normal force and the weight of the individual remains constant. However, when the elevator begins to accelerate upwards, the normal force exerted by the scale must increase to counter the upward acceleration of the elevator.
This causes an increase in weight measured on the scale. Therefore, if one notices an increase in their weight while standing on a scale in an elevator, it indicates that the elevator is accelerating upwards.
To know more about acceleration refer here:
https://brainly.com/question/30660316#
#SPJ11
a skateboarder jumps on a moving skateboard from the side. does the skateboard slowdown or speed up in this process?
When a skateboarder jumps on a moving skateboard from the side, the skateboard will slow down in this process. The law of conservation of momentum.
According to the law of conservation of momentum, the total momentum of a closed system remains constant if no external forces act on it. So, in this scenario, the initial momentum of the skateboarder and the skateboard moving at a certain speed in one direction is equal to the momentum of the skateboarder and the skateboard moving at a slower speed in the same direction.
This means that the momentum of the skateboarder and the skateboard should be equal in magnitude but opposite in direction to the momentum of the skateboard before the skateboarder jumps on. When the skateboarder jumps on a moving skateboard, the skateboard's momentum changes as the skateboarder's mass is added to it.
Since the law of conservation of momentum applies, the momentum gained by the skateboarder and the skateboard is equal to the momentum lost by the skateboard.
As a result, the skateboard's speed decreases when the skateboarder jumps on.
To know more about initial momentum click here:
https://brainly.com/question/12450698
#SPJ11
suppose the air in a spherical baloon is being let out at a constant rate of 370 /. what is the rate of change of the radius of the balloon when the r
When the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s, the rate of change of the radius of the balloon is: 37/400π cm/s
We are supposed to find the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s. This is a problem involving a balloon, air and its volume.
Let's first use the formula for the volume of a sphere to get the relationship between the volume and the radius of the spherical balloon.
V= (4/3)πr3
When differentiating both sides of the above equation with respect to time, t, we have;V= (4/3)πr3, dV/dt= 4πr² dr/dt
From the problem, we have the radius, r = 10 cm and the rate of change of volume, dV/dt = - 370 cm³/s (since the air is being let out of the balloon).
Now we can substitute the given values into the equation to obtain;
dV/dt= 4πr²
dr/dt-370 = 4π(10²)dr/dt
dr/dt = - 370/ (4π(10²))= - 37/400π cm/s
Therefore, the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s is - 37/400π cm/s.
To learn more about "Radius" here:
https://brainly.com/question/14928411#
#SPJ11
The previous question is incomplete, therefore, a properly phrased question is provided below.
What is the rate of change of the radius of a spherical balloon with a radius of 10 cm, when the air is being let out of the balloon at a constant rate of 370 cm³/s?
the electric motor of a model train accelerates the train from rest to 0.700 m/s in 31.0 ms. the total mass of the train is 505 g. find the average power delivered to the train during its acceleration.
The average power delivered to the train during its acceleration is 0.134 W.
The average power delivered to the train during its acceleration can be calculated using the equation P = Fv/t. The total mass of the train is 505 g, which can be converted to kilograms by multiplying by 0.001. The time it takes for the train to accelerate is 31.0 ms, which can be converted to seconds by dividing by 1000. The velocity of the train is 0.700 m/s. Using these values, the average power delivered to the train can be calculated as:
P = (505g*0.001 kg/g) * (0.700 m/s/ (31.0ms/1000s))
P = 0.134 W
The average power delivered to the train is 0.134 W. This calculation shows that the electric motor was able to deliver enough power to accelerate the train from rest to 0.700 m/s in 31.0 ms.
For more such questions on Average Power.
https://brainly.com/question/29108216#
#SPJ11
jasmin, a cyclist, accelerates from rest. after 8 s, the wheels have made 3 revolutions. (a) what is the angular acceleration of the wheels? (b) what is the angular velocity of the wheels after 8 s?
a. The angular acceleration of the wheels is 0.2945 rad/s². b. The angular velocity of the wheels after 8 seconds is 2.3560 rad/s.
Calculation:
a. The formula for angular acceleration is: α = (ω2 - ω1) / (t2 - t1) Whereα is angular acceleration, ω2 is final angular velocity, ω1 is initial angular velocity, t2 is final time, t1 is initial time. To calculate the angular acceleration, we can use the formula:α = (ω2 - ω1) / (t2 - t1)
The initial angular velocity of the wheels is zero since Jasmin starts from rest, soω1 = 0. We know that the wheels make 3 revolutions after 8 seconds, so the final angular velocity can be calculated as follows: ω2 = (3 revolutions / 8 s) x (2π radians / 1 revolution) = 2.3562 rad/s
Therefore,α = (2.3562 rad/s - 0 rad/s) / (8 s - 0 s) = 0.2945 rad/s². The angular acceleration of the wheels is 0.2945 rad/s².
b. To calculate the angular velocity of the wheels after 8 seconds, we can use the formula:ω = ω1 + αtWhereω is angular velocity,ω1 is initial angular velocity,α is angular acceleration, t is time. The initial angular velocity of the wheels is zero since Jasmin starts from rest, so ω1 = 0
We have already calculated the angular acceleration to be 0.2945 rad/s², and we know that the time is 8 seconds, soω = ω1 + αt = 0 + (0.2945 rad/s²) x (8 s) = 2.3560 rad/s. Therefore, the angular velocity of the wheels after 8 seconds is 2.3560 rad/s.
To know more about angular acceleration, refer here:
https://brainly.com/question/29428475#
#SPJ11
Problem 7 is the first question in the photo. Give actual answers pls and thank you.
The direction of the force on the proton when between the plates is downwards, in the direction of the electric field.
What is the acceleration of the proton?The acceleration of the proton can be calculated using the formula:
a = F/m
where F is the force on the proton and m is the mass of the proton.
The force on the proton is given by:
F = qE
where q is the charge of the proton and E is the magnitude of the electric field.
The charge of the proton is 1.6 x 10^-19 C. Therefore, the force on the proton is:
F = (1.6 x 10^-19 C)(3.0 N/C)
F = 4.8 x 10^-19 N
The mass of the proton is 1.67 x 10^-27 kg.
Therefore, the acceleration of the proton is:
a = (4.8 x 10^-19 N)/(1.67 x 10^-27 kg) = 2.9 x 10^8 m/s^2
The direction of the acceleration is downwards, in the direction of the electric field.
The path of the proton through the plates will be a straight line with a downward acceleration.
Learn more about the acceleration of a proton at: https://brainly.com/question/26979842
#SPJ1
Complete question:
A proton traveling to the right moves in-between the two large plates. A vertical electric field, pointing downwards with magnitude 3.0 N/C, is produced by the plates. What is the direction of the force on the proton when between the plates?
at what distance from a converging mirror with a 26 cm focal length should an object be placed so that its image is the same distance from the mirror as the object?
At what distance from a converging mirror with a 26 cm focal length should an object be placed so that its image is the same distance from the object should be placed 52 cm away from the mirror.
The image of the object is formed when light rays from the object intersect at a single point. The distance between this point and the mirror is the same as the distance between the mirror and the object.
This distance is known as the focal length of the mirror.The image is the same distance away from the mirror as the object. In this situation, the mirror is a converging mirror because it has a focal length.
To determine the position of the object, we can use the mirror formula.
1/f = 1/u + 1/v
where f is the focal length of the mirror,
u is the distance of the object from the mirror, and
v is the distance of the image from the mirror.
When u = v, we can substitute u with v in the equation to get
2/f = 1/uu = 2f
To determine the distance from the mirror to the object, we may now substitute the values of f and u.
The distance is equal to twice the focal length of the mirror.
Distance of object = 2(26 cm)Distance of object
= 52 cm.
for such more question on object
https://brainly.com/question/29223620
#SPJ11
to start in motion an object sitting at rest on a horizontal surface, the horizontal force applied must be
To start in motion an object sitting at rest on a horizontal surface, the horizontal force applied must be greater than the static friction force present.
This static friction force is the force that holds the object in place, and is equal to the coefficient of static friction multiplied by the normal force.
Therefore, if an object has a static friction coefficient of 0.2 and a normal force of 10 Newtons, then the minimum horizontal force required to start in motion the object is 2 Newtons.
The static friction is the force that opposes the initiation of motion between two surfaces in contact that are at rest relative to each other. The magnitude of the static friction force depends on the nature of the surfaces in contact and the force pressing them together.
Once the applied force exceeds the static friction force, the object will begin to move, and kinetic friction will take over.
To learn more about static friction:
https://brainly.com/question/13000653#
#SPJ11
the same baseball is thrown at an angle of 23 degrees and at a speed of 26.8 m/s. the ball is caught 33.456 m from the thrower. the acceleration of gravity is 9.81 m/ss. how high is the tallest spot in the ball's path?
The highest point in the ball's path is approximately 10.71 meters above the ground.
Horizontal distance = Vx × t
33.456 m = (26.8 m/s) × t
t = 1.25 s
Next, we can use the vertical distance formula to find the maximum height of the ball's path:
Vertical distance = Vy0 × t + 0.5 × a × t²
where Vy0 is the initial vertical velocity, which is given by:
Vy0 = V0 × sin(θ)
θ = 23 degrees
V0 = 26.8 m/s
Substituting these values, we get:
Vertical distance = (26.8 m/s) × sin(23°) × 1.25 s + 0.5 × (9.81 m/s²) × (1.25 s)²
Vertical distance = 10.71 m
Acceleration is a fundamental concept in physics that describes the rate of change of an object's velocity over time. It is defined as the change in velocity divided by the change in time, and is expressed in units of meters per second squared (m/s²).
Acceleration can occur in different ways, such as speeding up or slowing down, changing direction, or a combination of both. A positive acceleration means an object is speeding up, while a negative acceleration means it is slowing down. Acceleration also depends on the mass of the object, with a larger mass requiring a greater force to achieve the same acceleration as a smaller mass.
To learn more about Acceleration visit here:
brainly.com/question/30660316
#SPJ4
a sinusoidal wave is traveling along a rope. the oscillator that generates the wave completes 45.0 vibrations in 29.0 s. a given crest of the wave travels 400 cm along the rope in 12.0 s. what is the wavelength of the wave?
The wavelength of the sinusoidal wave traveling along a rope is calculated to be 21.5 cm.
The wavelength of a sinusoidal wave is defined as the distance between two consecutive crests or troughs. It can be started by finding the frequency of the oscillator that generates the wave:
frequency = number of vibrations / time
frequency = 45.0 / 29.0 s = 1.55 Hz
After this, we can find the speed of the wave:
speed = distance / time
speed = 400 cm / 12.0 s = 33.3 cm/s
The speed of a sinusoidal wave on a rope is related to its frequency and wavelength by the equation:
speed = frequency x wavelength
Therefore, we can rearrange the equation to solve for wavelength:
wavelength = speed / frequency
wavelength = 33.3 cm/s / 1.55 Hz
wavelength = 21.5 cm
Therefore, the wavelength of the wave is 21.5 cm.
Learn more about wavelength :
https://brainly.com/question/28762766
#SPJ4
Force exerted by a person or an object is called an ______________________ force.
The force exerted by a person or an object is called an applied force.
What is applied force?When a person or an object exerts force on another object, this force is called an applied force. Applied forces can be exerted in many different ways and can have a variety of effects on the objects they act upon. For example, a person might apply force to push a box across the floor, or an object might apply force to hold a book against a table.
Applied forces can be characterized by their direction, magnitude, and point of application. The direction of an applied force is the direction in which the force is being exerted (such as left, right, up, or down). The magnitude of an applied force is the amount of force being exerted (measured in newtons). The point of application of an applied force is the point at which the force is being exerted on the object.
It is important to note that applied forces can only be exerted on other objects - they cannot be exerted on the object that is doing the exerting. For example, if you push a box across the floor, you are applying a force to the box, not to yourself. This is because forces always occur in pairs - for every action, there is an equal and opposite reaction.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ9
which of the quantities listed below are transfers of energy? select all that apply. kinetic energy work potential energy thermal energy heat
Kinetic energy, work, potential energy, and thermal energy are all transfers of energy. Kinetic energy is the energy an object has due to its motion. Work is the transfer of energy through a force over a distance.
Potential energy is the energy an object has due to its position or chemical structure. Thermal energy is the energy due to the temperature of an object or system.
Heat is the transfer of energy from one object or system to another due to a difference in temperature.
Kinetic energy is the energy an object has when it is in motion. For example, if a person is running, the energy they use to run is considered kinetic energy.
Work is the energy transferred through a force, such as lifting a box. Work is the result of an applied force that causes an object to move in the direction of the force.
Potential energy is the energy an object has due to its position or chemical structure. For example, when an object is at rest on a table, it has potential energy.
Thermal energy is the energy due to the temperature of an object or system. Heat is the transfer of energy from one object or system to another due to a difference in temperature. Heat is also known as thermal energy.
Kinetic energy, work, potential energy, and thermal energy are all transfers of energy. Heat is also considered a transfer of energy.
All of these energy transfers have different forms, such as motion, force, position, and temperature.
to know more about kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
compare the above electric field to the electric field of a large parallel plate capacitor with the same voltage and distance between the plates. which one is larger? is this expected? explain.
The electric field due to a point charge will always be greater than that of a parallel plate capacitor.
The electric field due to a point charge is given by the formula E=kq/r². Compare the above electric field to the electric field of a large parallel plate capacitor with the same voltage and distance between the plates.
According to Coulomb's law, the electric field due to a point charge varies inversely with the square of the distance from the charge. The magnitude of the electric field between the plates of a capacitor is uniform and is given by E=V/d (where V is the voltage across the plates and d is the distance between them).
Thus, the electric field between the plates of a capacitor is given by E=V/d. Comparing both electric fields, we get that `E[tex]_{point}[/tex] = E[tex]_{plates}[/tex].
It's expected because the electric field between the plates of a capacitor is uniform, and its magnitude depends on the distance between the plates and the voltage applied.
The electric field due to a point charge, on the other hand, varies inversely with the square of the distance between the charge and the point where we want to measure the field. Therefore, the electric field due to a point charge will always be greater than that of a parallel plate capacitor.
Learn more about the electric field at https://brainly.com/question/19878202
#SPJ11
What would you expect the force to be if the distance was 30 meters? How did you come up with your answer?
The force would be 6 Newtons for a distance of 30 metres.
What connection exists between distance and force?A force is defined as any influence that results in a change in an object. Distance is the amount of distance that an object moves over time. A force is applied to an item, and the more force is applied, the farther the thing will move.
What is distance-based force?Action-at-a-distance forces are those that develop even when the two interacting objects are not in close proximity to one another but are nevertheless able to push or pull against one another despite this physical gap.
To know more about Newtons visit:-
https://brainly.com/question/16889018
#SPJ1
What is the maximum ramp angle that still allows the crate to remain at rest? (Make sure the coefficient of friction is 0.7.) .
Mass (m) = 300kg
The highest ramp angle at which the crate can still be at rest is roughly 35.5 degrees.
To determine the maximum ramp angle that still allows the crate to remain at rest, you need to consider the balance of forces acting on the crate. When the crate is on the verge of slipping, the frictional force is equal to the component of gravitational force acting parallel to the ramp.
Given that the coefficient of friction (µ) is 0.7, you can use the formula for the frictional force:
Frictional force (F_friction) = µ * Normal force (F_N)
The normal force acting on the crate is the component of gravitational force acting perpendicular to the ramp, which can be calculated as:
F_N = m * g * cos(θ)
The gravitational force acting parallel to the ramp can be calculated as:
F_gravity_parallel = m * g * sin(θ)
At the maximum angle, the frictional force will be equal to the gravitational force acting parallel to the ramp:
µ * F_N = F_gravity_parallel
Now, substitute the known values:
0.7 * (m * g * cos(θ)) = m * g * sin(θ)
Since the mass (m) and gravitational acceleration (g) are the same on both sides of the equation, they can be canceled out:
0.7 * cos(θ) = sin(θ)
To find the maximum angle (θ), you can use the arctangent function:
θ = arctan(0.7)
θ ≈ 35.5 degrees
So, the maximum ramp angle that still allows the crate to remain at rest is approximately 35.5 degrees.
To know more about frictional force click on below link :
https://brainly.com/question/1714663#
#SPJ11
old faithful geyser in yellowstone national park shoots water every hour to a height of 40.0 m. with what velocity does the water leave the ground? g
The water leaves the ground with a velocity of 19.4 m/s.
Old Faithful Geyser in Yellowstone National Park shoots water every hour to a height of 40.0 m. To calculate the velocity of the water as it leaves the ground, we can use the formula V = √(2gh), where V is the velocity, g is the acceleration due to gravity, and h is the height the water is being launched from.
Therefore, V = √(2 * 9.8 * 40.0) = 19.4 m/s. This means that the water leaves the ground with a velocity of 19.4 m/s.
To visualize this, imagine the water being launched straight up from the ground. In one second, the water would move upwards 19.4 m, and in one hour, it would have moved 19.4 * 3600 = 69,840 m, or nearly 70 km.
It is important to note that the velocity of the water is not constant, as it accelerates as it moves upwards. The formula above only applies to the water at the very instant that it leaves the ground.
Additionally, the velocity is affected by factors such as the pressure of the geyser and any wind speeds, so the actual velocity may differ slightly. However, the formula given above can be used to accurately calculate the velocity of the water as it leaves the ground.
For more such questions on Velocity.
https://brainly.com/question/23159933#
#SPJ11
Describe the shape of the graph, and explain what it says about the relationship between height and gravitational potential energy.
A doubling of the height will result in a doubling of the gravitational potential energy since the gravitational potential energy of an item is precisely proportional to its height above the zero point.
How do height and gravitational potential relate to one other?The mass and height of an item affect the gravitational potential energy. V = -GM/r is the formula for gravitational potential. U = mgh is the formula for gravitational potential energy.
What connection exists between height and the acceleration of gravity?This is the acceleration brought on by gravity while you are above the earth's surface. Based on the aforementioned calculation, we may conclude that as an object's height increases, the value of g falls until it is zero.
To know more about gravitational potential visit:-
https://brainly.com/question/31024811
#SPJ1