Answer:
6N/m
Explanation:
k = Fe
f = 2.4
e = 0.4
2.4 ÷ 0.4
= 6N/m
What are immiscible liquids?
Immiscible liquids are those which won't mix to give a single phase. Oil and water are examples of immiscible liquids - one floats on top of the other. It explains the background to steam distillation and looks at a simple way of carrying this out.
two forces of 1.5N and 2.0N act vertically at two ends of a meter scale.Where and in what direvtion should a force should be applied so that the scale remains horizontally stable
Answer:
.5 newtons on the 1.5 N side
The Fitness Log is:
A.
Fitness information presented in lesson format.
B.
A carefully considered essay response on a specified topic.
C.
A checklist of items to complete each section.
D.
A record of all the physical activity you complete in one week.
Answer:
D. A record of all the physical activity you complete in one week.
Explanation:
A "Fitness Log" allows you to keep track of your workout or exercise. Therefore, it is a record of the different workout you've managed to complete within a time frame. It gives you several information such as the type of workout you've completed, its duration and the time of the day it was performed. This makes a person motivated to exercise because he can see his progress. He may also include his mood before and after workout in order to become more mindful in exercising and many other things.
Answer:
the answer is D i just got the answer right
Explanation:
what is friction. what are the two important properties of friction
Answer: 1. It always acts in the direction opposite to the direction of motion. 2. It's magnitude is equal to that of the force trying to set the object in motion only until it starts to move.
Explanation: Properties of frictional forces:
1. Frictional force always acts parallel to two planes in contact with each other and in a direction opposite to that of relative motion of the two bodies. 2. Frictional forces are caused due to intermolecular interactions between the bodies.
Explanation:
force is a force between two surfaces that are sibling
1. it acts parrell
2. it is caused due to intermolecular interactions between two bodies
plzzzz mark me brainliest
How would you describe the relationship of an object’s speed
Answer: Average speed is distance divided by time interval for the distance traveled.
Explanation: I hope that helped!
Se lanza un cuerpo verticalmente hacia arriba con una velocidad de 60m/s. Calcular a) Que altura se hallara el cuerpo al cabo de 2s, b)a qué altura máxima llega? C) cuánto tiempo se demora en llegar a la altura máxima y en qué tiempo regresa nuevamente al sitio donde fue lanzado.
Answer:
(a) 100.38 m
(b) 183.49 m
(c) 6.12 seconds and 12.24 seconds.
Explanation:
Given that a body is thrown vertically upwards with a velocity of 60 m/s.
Assuming that upward direction is positive
So, the initial velocity, u=60 m/s
As the acceleration due to gravity, g=9.81 m/s^2, acts in the downward direction, so
a=-9.81 m/s^2
(a) By using the equation of motion, the displacement of the body after time t=2 seconds, is
[tex]s=ut+\frac 1 2 at^2 \\\\ s=60\times 2 +\frac 1 2 (-9.81)2^2 \\\\[/tex]
s=100.38 m
Hence, the height of the body will be 100.38 m after 2 seconds.
(b) At the maximum height, the velocity of the object is zero, so
v=0.
The maximum height is the displacement of the body where it attains zero velocity.
Using the equation of the motion.
[tex]v^2=u^2+2as \\\\0= 60^2 +2(-9.81)s \\\\s=\frac {3600}{2\times 9.81} \\\\[/tex]
s=183.49 m
Hence, the maximum height of the body is 183.49 m.
(c) Time to reach the maximum height
v=u+at
0=60 +(-9.81)t
t=60/9.81
t=6.12 seconds.
The body will take 6.12 seconds to reach the maximum height.
As the time to reach the maximum height from the initial position is the same as the time to reach the initial position from the maximum height.
So, the total time to returns again to the place where it was launched
= 2 x 6.12 = 12.24 seconds.
I need help in question 9 plzzz
True is the correct answer
3. A boat at sea is being moved by the ocean current at 5 metres/minute directly to the east. At the same time it is being moved directly to
the north at 3 metres/minute by a strong wind. Determine the magnitude and direction of the boat's overall velocity.
Explanation:
A boat at sea is being moved by the ocean current at 5 metres/minute directly to the east.
At the same time, it is being moved directly to the north at 3 metres/minute by a strong wind.
We need to find the magnitude and direction of the boat's overall velocity.
As both velocities are moving perpendicular to each other. The resultant velocity is given by :
[tex]v=\sqrt{5^2+3^2} \\\\=\sqrt{25}\\\\=5\ \text{metres/minute}[/tex]
For direction,
[tex]\tan\theta=\dfrac{v_y}{v_x}\\\\=\dfrac{3}5{}\\\\\theta=\tan^{-1}(\dfrac{3}5{})\\\\=30.96^{\circ}[/tex]
Hence, this is the required solutin.
solve for x 19.2=x/98.9
2.
Which of the following gear speeds
makes motor vehicle move faster?
a) 0
b) 11
c) 2
d) 3
e) 4
Answer:
e.4
Explanation:
Can you please help me with this physics question
Answer:
See the answers below
Explanation:
We can solve both problems using vector sum.
a)
Let's assume the forces that help the diver dive as positive downward, and the forces that oppose upward, as negative
[tex]F_{resultant}=100+30-85+900\\F_{resultant}=845[N][/tex]
The drag force is horizontal d this way in the horizontal direction we will only have the drag force that produces the water stream.
[tex]F_{drag}=50[N][/tex]
b)
Let's assume the forces that propel the rocket upwards as positive and forces like the weight of the rocket and other elements as negative forces.
[tex]F_{resultant}=960+7080-7700\\F_{resultant}=340 [kN][/tex]
Which of these materials is not magnetic?'
*
Cobalt
Iron
Copper
Stainless Steel
Answer:
stainless steel is the material which is non magnetic.
a roller coaster accelerates from initial velocity of 6.0 m/s to a final velocity of 70 m/s over 4 seconds . what is the acceleration ?
PLEASE PLEASE HELP ASAP
A cyclist speeds up from 3 m/s to 7 m/s in 8 seconds.
What is its change in velocity?
What's its acceleration?
Answer:
Change in velocity = 4 m/s and acceleration = 0.5 m/s²
Explanation:
Given that,
Initial velocity, u = 3 m/s
Final velocity, v = 7 m/s
Time, t = 8 seconds
(a) The change in velocity of a cyclist.
[tex]\Delta v=v-u\\\\=7\ m/s-3\ m/s\\\\=4\ m/s[/tex]
(b) Acceleration,
[tex]a=\dfrac{\Delta v}{t}\\\\a=\dfrac{4\ m/s}{8\ s}\\\\a=0.5\ m/s^2[/tex]
So, the change in velocity is 4 m/s and acceleration is 0.5 m/s².
i need help on this question.
Answer:
Answer: B. 49 N
Explanation:
Friction Force
When an object is at rest on a rough surface, it encounters a friction force that opposes motion.
The friction force when an object is moving on a horizontal surface is calculated by:
[tex]Fr=\mu_k N[/tex]
Where [tex]\mu_k[/tex] is the coefficient of static friction and N is the normal force.
If no forces other then the weight and the normal are acting upon the y-direction, then the weight and the normal are equal in magnitude:
N = W = m.g
Thus, the friction force is:
[tex]Fr=\mu_k W[/tex]
We are given the coefficient of static friction [tex]\mu_k=0.5[/tex] and the mass of the object m=10 Kg. The minimum force needed to make it start moving is the maximum friction force:
Fr=0.5*10*9.8
Fr = 49 N
Answer: B. 49 N
How to find pressure when mass and area is given?
Answer:
Pressure and force are related, and so you can calculate one if you know the other by using the physics equation, P = F/A. Because pressure is force divided by area, its meter-kilogram-second units are newtons per square meter, or N/m2.
Explanation:
Do you not feel the pressure when mass is on you?
a body complete 400 j work in 5 second.what is its power
Answer:
80 watts
Explanation:
power= energy / time
400/5 = 80
Plzz Help easy quesion for 20 points Why does someone get burned if they touch an old filament bulb that has been on for a few hours? Plzz Help
Answer:
In reality, the filament gets so hot it in a real sense bubbles off molecules and electrons. Now and again this material gathers as a dull spot at the highest point of the bulb. Eventually, the filament falls apart, gets frail, and breaks, subsequently finishing the life of the light. Lights radiate light by siphoning an electric flow through a dainty tungsten fiber. The filament warms and emits light. Over the long haul, the filament oxidizes and turns out to be increasingly fragile, until it splits up and the bulb goes out. ... Tungsten picks up obstruction as it warms.
Hope this helped :)
What happens to cause the tissue around a cut to become swollen, red, and
painful?
A. Fluid and white blood cells move into the tissue from nearby blood
vessels.
B. White blood cells burst and release wastes made by digesting
pathogens.
C. Lymph nodes develop in the tissue and begin trapping pathogens.
D. Chemical messengers released by the tissue cause nearby
muscles to contract and pull on bones.
SUBM
Answer:
The answer is A. Fluid and white blood cells move into the tissue from nearby blood vessels.
Explanation:
Answer:
A is the Answer
Explanation:
I took the test
If six moles of hydrogen chloride (HCl) react with plenty of aluminum, how many moles of aluminum chloride (AlCl3) will the reaction produce?
2Al + 6HCl → 2AlCl3 + 3H2
Answer:
Two moles of aluminum chloride [tex](AlCl_3)[/tex] are produced when six miles of hydrogen Chloride [tex](HCl)[/tex] react with plenty of aluminum
Explanation:
6 Moles of [tex]HCl[/tex] will only react with 2 moles of [tex]Al[/tex] irrespective of the number of moles of each compound present. The reaction wiil take place in this ratio only. The products produced will be 2 moles of [tex]AlCl_3[/tex] and 3 moles of [tex]H_2[/tex] this ratio will also be constant.
So, six moles of hydrogen chloride [tex](HCl)[/tex] will react with plenty of aluminum to produce many 2 moles of aluminum chloride [tex](AlCl_3)[/tex].
A student thinks that any real vibration must be damped. Is the student correct? If so, give convincing reasoning. If not, give an example of a real vibration that keeps constant amplitude forever if the system is isolated.
Answer:
Yes the student is correct
Explanation:
The first law of thermodynamics states that energy can neither be created nor destroyed
The second law of thermodynamics states that the entropy (disorderliness) of an isolated system always increases
Therefore, whereby energy is not supplied to maintain the orderly oscillatory motion with constant amplitude, the amplitude of the system is bound to reduce with time that is the vibration of the system must be damped
A bus slows from 10 m/s to a stop in 4 seconds.
What is its change in velocity? what is its acceleration?
Answer:
cant see to find the answer sorry :( i tried :( good luck !! you'll do great <3333 BEST OF LUCK :DDDD
Explanation:
How is an emulsion different from other colloids?
The difference between colloid and emulsion is that a colloid can form when any state of matter (solid, liquid or gas) combine with a liquid whereas an emulsion has two liquid components which are immiscible with each other.
Answer:
wrthfnhdghkyulyf
Explanation:
zdfhdfhghdhddddddddddddddddddddd
la) What is meant by the term Basic Quantities.
Answer:
A basic quantity is basically the physical quantity that can not be defined in terms of other quantities.
Explanation:
A basic quantity is basically the physical quantity that can not be defined in terms of other quantities.
Some of the names of the basic quantities include:
Mass, denoted by the symbol 'm', with S.I. unit 'kg'Length, denoted by symbol 'l', with S.I. unit 'm'Time, denoted by symbol 't', with S.I. unit 's'Current, denoted by 'I', with S.I. unit 's' 'A'Temperature, denoted by 'T', with S.I. unit 'K'Amount of substance, denoted by 'n', with S.I. unit 'mol'Luminous Intensity, denoted by 'Iv', with S.I. unit 'cd'A basic quantity is chosen arbitrarily.A ball is thrown directly upward with an initial speed of 72 m/s. How much time passes before the ball reaches the highest point it will ever reach
Answer:
7.35 seconds
Explanation:
The computation of the time passed prior to the ball reached to the highest point is as follows;
As we know that the acceleration because of gravity on earth is 9.8 m/s
As the ball is thrown directly in an upward direction with a speed of 72 m/s
So, the time passed prior to the ball reached to the highest point is
= 72 ÷ 9.8
= 7.35 seconds
Hence, the above represents the answer
A professional baseball player can throw the ball around 45 m/s if the distance between the pitcher and the batter is 18.39 m. How much time does it take for the ball to get to the batter?
Answer:
The time taken for the ball to get to the batter is 0.41 s.
Explanation:
Given;
initial velocity of the baseball, u = 45 m/s
horizontal distance between the pitcher and the batter, X = 18.39 m
The horizontal distance or range of a projectile is given as;
X = ut
where;
t is the time of flight
u is the initial velocity
t = X / u
t = 18.39 / 45
t = 0.41 s
Therefore, the time taken for the ball to get to the batter is 0.41 s.
A box has a mass of 150kg and the surface area of the bottom of the box is :
[tex]15m {}^{2} [/tex]
. How much pressure the box will exert on the floor?
Answer:
Pressure = 100 Pascals
Explanation:
[tex]pressure = \frac{force}{area} \\ = \frac{150 \times 10}{15} \\ = \frac{1500}{15} \\ = 100 pa[/tex]
How much tension must a rope withstand if it is used to accelerate a 6526 kg car vertically upwards at 8.9 m/s^2?
Answer:
The value is [tex]T = 122036.2 \ N[/tex]
Explanation:
From the question we are told that
The mass of the car is [tex]m = 6526 \ kg[/tex]
The acceleration is [tex]a= 8.9 \ m/s^2[/tex]
Generally the net force applied on the rope is mathematically represented as
[tex]F_{net} = T - W[/tex]
Here W is the weight of the car which is evaluated as
[tex]W = m * g[/tex]
=> [tex]W = 6526 * 9.8[/tex]
=> [tex]W = 63954.8 \ N[/tex]
Generally the net force can also be mathematically represented as
[tex]F = m * a[/tex]
So
[tex]m * a = T - 63954.8[/tex]
=> [tex]6526 * 8.9 = T - 63954.8[/tex]
=> [tex]T = 122036.2 \ N[/tex]
How many days does the earth take to rotate around the sun
Answer:
1 day
Explanation:
The spinning movement of Earth around its axis is known as Earth's rotation.
The Earth rotates around the Sun in 1 day that is 24 hours but once in every 23 hours, 56 minutes, and 4 seconds with respect to other stars.
According to the Indian astronomer Aryabhata, Earth rotates about its axis daily.
why it is important to have regular supervision of the weights and measurements in the marked?
Explanation:The fundamental answer is that without regular supervision of, and definitions of, weights and measures, commerce and exchange would be impossible, and there would be no market whatsoever for anything.
Explanation:
#Shadow