Answer:
The best example would be a pendulum inside a sealed empty room.
Explanation:
Figure shows four paths along which objects move from a starting point to a final point, all im the same time interval. The paths pass over a grid of equally spaced straight lines. Rank the paths according to the average velocity of the objects.
Answer:
12345678901234567890
Please halp
Why does a suspended magnet always rest in the North-South direction?
Explanation:
because magnet attract opposite sides. like north and south.
Answer:
Its because the magnet has both north and south pole, so when suspended it turns its south pole towards southern hemisphere and the north pole towards northern hemisphere
Hope it helped u,
pls mark as the brainliest
^_^
What is the speed that is measured in speedometer to track speed violation?
Answer:
The officer's unit detects this 135-mile-per-hour speed and should subtract the patrol car's 70-mile -per-hour ground speed to get your true speed of 65 miles per hour. Instead, the officer's ground-speed beam fixes on the truck ahead and measures a false 50-mile-per-hour ground speed.
Explanation:
A speedometer or speed meter is a gauge that measures and displays the instantaneous speed of a vehicle. Now universally fitted to motor vehicles, they started to be available as options in the early 20th century, and as standard equipment from about 1910 onwards.
ASAP PLEASE HELP!
What is nuclear potential energy?
Answer:Nuclear potential energy is the potential energy of the particles inside an atomic nucleus
A 15.5 kg box is pushed across the lunch table. The acceleration of the box is 24.2 m/S. What is the net force applied to the box?
Answer:
375.1 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 15.5 × 24.2
We have the final answer as
375.1 NHope this helps you
Starting at t = 0 a net external force in the +x-direction is applied to an object that has mass 5.00 kg. A graph of the force as a function of time is a straight line that passes through the origin and has slope 5.00 N/s.
If the object is at rest at t = 0 what is the magnitude of the force when the object has reached a speed of 9.00 m/s?
Express your answer with the appropriate units.
Answer:
15√2 N
Explanation:
The acceleration is given by ...
a = F/m = 5t/5 = t . . . . meters/second^2
The velocity is the integral of acceleration:
v = ∫a·dt = (1/2)t^2
This will be 9 m/s when ...
9 = (1/2)t^2
t = √18 . . . . seconds
And the force at that time is ...
F = 5(√18) = 15√2 . . . . newtons
If the coefficient of kinetic friction between tires and dry pavement is 0.80, what is the shortest distance in which you can stop an automobile by locking the brakes when traveling at 29.1 m/s?
A. 54 m
B. 50 m
C. 64 m
D. 60 m
Answer:
54m is the answer......A 260-kg glider is being pulled by a 1,940-kg jet along a horizontal runway with an acceleration of a= 2.20 m/s^2 to the right. Find the following:
a. the magnitude of the thrust provided by the jet's engines.
b. the magnitude of the tension in the cable connecting the jet and glider
Answer:
a) The magnitude of the thrust provided by the jet's engines is 4840 newtons.
b) The magnitude of the tension in the cable connecting the jet and glider is 572 newtons.
Explanation:
a) By Newton's laws we construct the following equations of equilibrium. Please notice that both the glider and the jet experiments has the same acceleration:
Jet
[tex]\Sigma F = F - T = m_{J}\cdot a[/tex] (1)
Glider
[tex]\Sigma F = T = m_{G}\cdot a[/tex] (2)
Where:
[tex]F[/tex] - Thrust of jet engines, measured in newtons.
[tex]T[/tex] - Tension in the cable connecting the jet and glider, measured in newtons.
[tex]m_{G}[/tex], [tex]m_{J}[/tex] - Masses of the glider and the jet, measured in kilograms.
[tex]a[/tex] - Acceleration of the glider-jet system, measured in meters per square second.
If we know that [tex]m_{G} = 260\,kg[/tex], [tex]m_{J} = 1,940\,kg[/tex] and [tex]a = 2.20\,\frac{m}{s^{2}}[/tex], then the solution of this system of equations:
By (2):
[tex]T = (260\,kg)\cdot \left(2.20\,\frac{m}{s^{2}} \right)[/tex]
[tex]T = 572\,N[/tex]
By (1):
[tex]F = T+m_{J}\cdot a[/tex]
[tex]F = 572\,N+(1,940\,kg)\cdot \left(2.20\,\frac{m}{s^{2}} \right)[/tex]
[tex]F = 4840\,N[/tex]
The magnitude of the thrust provided by the jet's engines is 4840 newtons.
b) The magnitude of the tension in the cable connecting the jet and glider is 572 newtons.
What happens when a population exceeds its carrying capacity?
Answer:
If a population exceeds carrying capacity, the ecosystem may become unsuitable for the species to survive. If the population exceeds the carrying capacity for a long period of time, resources may be completely depleted.
A 5-kg block slides down a plane inclined at 30 0 to the horizontal. Find
a. The acceleration of the block if the plane is frictionless.
b. The acceleration if the coefficient of kinetic friction is 3 2 .
Answer:
a) 4.9m/s²
b) 2.18m/s²
Explanation:
a) According to Newton's second law of motion
\sum Fx = ma
Fm-Ff = ma
Fm is the moving force = Wsin theta
Ff is the frictional force = 0N (frictionless plane)
m is the mass
a is the acceleration
Substituting into the formula
Fm -Ff = ma.
Wsintheta = ma
mgsintheta = ma
gsintheta = a
a = 9.8sin30°
a = 9.8(0.5)
a = 4.9m/s²
Hence the acceleration of the block if the plane is frictionless is 4.9m/s²
b) Let the coefficient if friction given be 0.32
From the formula
Fm-Ff = ma
mgsintheta - nmgcostheta = ma
gsintheta - ngcostheta = a
9.8(sin30)-0.32(9.8)cos30 = a
4.9-2.72 = a
a = 2.18m/s²
Hence the acceleration if the coefficient of kinetic friction is 0.32 is 2.18m/s²
Two railway tracks are parallel to west east direction. Along one track, train A moves with a speed of 45 m/s from west to east, while along the second track, train B moves with a speed of 60 m/s from east to west . calculate speed of Bw.r.t. A
Answer:
(i) Relative velocity of B w.r.t A= Sum of speeds of trains
=54+90
=144kmph
(ii)Relative velocity of B w.r.t Ground(G)=v
B/G
=−90kmph
v
G
=0
Relative velocity of ground(G) w.r.t B =v
G/B
=v
G
−v
B/G
v
G/B
=0−(−90)
v
G/B
=90kmph
At what angle should the roadway on a curve with a 50m radius be banked to allow cars to negotiate the curve at 12 m/s even if the roadway is frictionless?
Answer:
The road bank angle is 16.38⁰.
Explanation:
radius of curvature of the road, r = 50 m
allowable speed of car on the road, v = 12 m/s
The bank angle is calculated as;
[tex]\theta = tan^{-1} (\frac{v^2}{gr} )[/tex]
where;
θ is the road bank angle
g is acceleration due to gravity = 9.8 m/s²
[tex]\theta = tan^{-1} (\frac{v^2}{gr} )\\\\\theta = tan^{-1} (\frac{12^2}{9.8 \times 50} )\\\\\theta = tan^{-1} ( 0.2939)\\\\\theta = 16.38 ^0[/tex]
Therefore, the road bank angle is 16.38⁰.
A parachutist of mass 56.0 kg jumps out of a balloon at a height of 1400 m and lands on the ground with a speed of 5.60 m/s. How much energy was lost to air friction during this jump?
kJ
process and answer please
Answer:
Efriction = 768.23 [kJ]
Explanation:
In order to solve this problem we must use the principle of energy conservation. Where it tells us that the energy of a system plus the work applied or performed by that system, will be equal to the energy in the final state. We have two states the initial at the time of the balloon jump and the final state when the parachutist lands.
We must identify the types of energy in each state, in the initial state there is only potential energy, since the reference level is in the ground, at the reference point the potential energy is zero. At the time of landing the parachutist will only have potential energy, since it reaches the reference level.
The friction force acts in the opposite direction to the movement, therefore it will have a negative sign.
[tex]E_{pot}-E_{friction}=E_{kin}[/tex]
where:
[tex]E_{pot}=m*g*h\\E_{kin}=\frac{1}{2}*m*v^{2}[/tex]
m = mass = 56 [kg]
h = elevation = 1400 [m]
v = velocity = 5.6 [m/s]
[tex](56*9.81*1400)-E_{friction}=\frac{1}{2}*56*(5.6)^{2}\\769104 -E_{friction}= 878.08 \\E_{friction}=769104-878.08\\E_{friction}=768226[J] = 768.23 [kJ][/tex]
A cart on a horizontal, linear track has a fan attached to it. The cart is positioned at one end of the track, and the fan is turned on. Starting from rest, the cart takes 4.22 s to travel a distance of 1.44 m. The mass of the cart plus fan is 350 g. Assume that the cart travels with constant acceleration.
Required:
a. What is the net force exerted on the cart-fan combination?
b. Mass is added to the cart until the total mass of the cart-fan combination is 656 g, and the experiment is repeated. How long does it take for the cart, starting from rest, to travel 1.63 m now?
Answer:
a
[tex]F = 0.0566 \ N[/tex]
b
[tex]t = 6.147 \ s[/tex]
Explanation:
From the question we are told that
The distance travel in 4.22 s is [tex]s = 1.44 \ m[/tex]
The mass of the cart plus the fan is [tex]m = 350 \ g = 0.35 \ kg[/tex]
Generally from kinematic equation we have that
[tex]s = ut + \frac{1}{2} * a * t^2[/tex]
Here u is the initial velocity with value [tex]u = 0 \ m/s[/tex]
So
[tex]1.44= 0 * t + \frac{1}{2} * a * 4.22^2[/tex]
=> [tex]a = 0.1617 \ m/s^2[/tex]
Generally the net force is
[tex]F = m * a[/tex]
=> [tex]F = 0.35 * 0.1617[/tex]
=> [tex]F = 0.0566 \ N[/tex]
Gnerally the new mass of the cart plus the fan is [tex]M = 656 \ g = 0.656 \ kg[/tex]
The distance considered is [tex]s_1 = 1.63 \ m[/tex]
Generally the new acceleration of the cart is mathematically represented as
[tex]F = M * a_1[/tex]
=> [tex]a_1 = \frac{F}{M}[/tex]
=> [tex]a_1 = \frac{0.0566}{0.656}[/tex]
=> [tex]a_1 = 0.08628 \ m/s^2[/tex]
Gnerally from kinematic equation we have
[tex]s = ut + \frac{1}{2} * a_1 * t ^2[/tex]
Here u is the initial velocity and the value is zero because it started from rest
=> [tex]1.63 = 0 * t + \frac{1}{2} * 0.08628* t ^2[/tex]
=> [tex]t = 6.147 \ s[/tex]
How does temperature rise and impurities affect the surface tension of water
(2 mks)
Answer:
Surface tension is the downward force acting on the surface of liquid due to presence of inter molecular forces or cohesive forces between the particles of liquid.
Surface tension decreases with increase in temperature as the forces among particles decrease due to increase in kinetic energy and thus the cohesive nature decreases and thus surface tension also decreases.
Surface tension may decrease or increase with increase in soluble impurities .Insoluble impurities decrease the surface tension.
A force of 100 newtons Is applled to a box at an angle of 36° with the horizontal. If the mass of the box Is 25 kilograms, what Is the horizontal
Bradley drops a rock in a well. It falls for 12 seconds. How deep is the well?
A 0.046 kg golf ball hit by a driver can accelerate from rest to 67 m/s in 1 ms while the driver is in contact with the ball. How much average force does the golf ball experience
Answer:
Average force = 67 mn
Explanation:
Given:
Initial velocity u = 0 m/s
Final velocity v = 67 m/s
Time t = 1 ms = 0.001 sec.
Computation:
Using Momentum theory
Change in momentum = F × Δt
(v-u)/t = F × Δt
F × 0.001 = (67 - 0)/0.001
F= 67,000,000
Average force = 67 mn
If a 0.750M solution exerts an osmotic pressure of 22.5atm, what must be the temperature (in Kelvin) of the solution
Answer:
T = 365.58 K
Explanation:
Given that,
The concentration of solution, C = 0.750M
Osmotic pressure, P = 22.5 atm
We need to find the temperature of the solution.
The formula for the osmotic pressure is given by :
[tex]P=CRT[/tex]
Where
R is gas constant, [tex]R=0.08206\ L\ atm/mol-K[/tex]
[tex]T=\dfrac{P}{CR}\\\\=\dfrac{22.5}{0.75\times 0.08206}\\\\=365.58\ K[/tex]
So, the temperature of the solution is 365.58 K.
A 50.0-kg child stands at the rim of a merry-go-round of radius 2.25 m, rotating with an angular speed of 3.30 rad/s.. What is the child's centripetal acceleration?
Answer: the child's centripetal acceleration=24.50 m/s²
Explanation:
Given that mass of child= 50 kg
radius of merry go round= 2.25m
angular speed = 3.30 rad/s
Centripetal Acceleration = v²/ r
But V= ωr
So Centripetal Acceleration = v²/ r = (ωr)²/ r
=(3.30)² x (2.25)²/ 2.25 = (3.30)² x 2.25
=24.5025m/s²
=24.50 m/s²
Show that a 2,500,000-J change in kinetic energy occurs for an airplane that is moved 500 m in takeoff by a sustained force of 5000 N.
Answer:
The answer to your question is given below
Explanation:
To solve this problem, we'll assume that the plane is initially at rest.
Hence, the kinetic energy of the plane at rest is zero i.e Initial kinetic energy (KE₁) = 0
Next, we shall determine the final kinetic energy of the plan when the force was applied. This can be obtained as follow:
Force (F) = 5000 N
Distance (s) = 500 m
Energy (E) =?
E = F × s
E = 5000 × 500
E = 2500000 J
Since energy an kinetic energy has the same unit of measurement, thus, the final kinetic energy (KE₂) of the plane is 2500000 J
Finally, we shall determine the change in the kinetic energy of the plane. This can be obtained as follow:
Initial kinetic energy (KE₁) = 0
Final kinetic energy (KE₂) = 2500000 J
Change in kinetic energy (ΔKE) =?
ΔKE = KE₂ – KE₁
ΔKE = 2500000 – 0
ΔKE = 2500000 J
Hence, the change in the kinetic energy of the plane is 2500000 J.
Are volcanoes fed by highly viscous magma a greater threat to life and property than volcanoes supplied with very fluid magma?
Answer:
A volcano fed by highly viscous magma is likely to be a greater threat to life and property than a volcano supplied with very fluid magma because with high viscous magma gas is trapped more in the magma so the gas will build up and then eventually explode, whereas with fluid magma the gas can escape allowing the magma.
HOPE THIS HELPS!!!
Explanation:
Less fluid magma done great damaged to the property and life as compared to highly viscus magma.
Highly viscus magma VS less viscous magmaNo, volcanoes that are fed by highly viscous magma are not a greater threat to life and property than volcanoes supplied with very fluid magma because the highly viscous magma can't move to a large distance due to its large viscosity.
While on the other hand, those volcanoes that supplied with very fluid magma do great damaged to the property due to its easily flowing on the surface of earth so we can conclude that less fluid magma done great damaged to the property and life as compared to highly viscus magma.
Learn more about magma here: https://brainly.com/question/23661578
A student is performing an experiment that involves the charge on a metal sphere that is attached to a charged electroscope. A charged rod is brought near the sphere without touching it. As a result the leaves of the electroscope separate more. The rod is then removed, and the leaves return to their initial separated position. The student repeats the procedure, but this time the electroscope is grounded and the ground is removed before the rod is removed from near the sphere. The leaves again end up separated. What can be concluded about the charge on the separated leaves of the electroscope
Answer:
The leaves have a charge in each experiment, but the sign of the charge cannot be determined.
Explanation:
In the first experiment, A charged rod is brought near the sphere without touching it. As a result the leaves of the electroscope separate more.
Thus indicates that there are charges involved. Now, like charges would repel like what is happening here but we don't know if they are both positive or negative because in both cases, they will still repel.
Now for the second experiment, electroscope is grounded and the ground is removed before the rod is removed from near the sphere. The leaves end up being separated again.
Similar to the first time, it's clear there are charges but the charges repel. Thus, they are the same sign charges but we don't know if they are both positive or negative.
Thus, in both cases we can conclude that the leaves have charges but we don't know their signs.
O D. Both objects won't move at all. They will just stay where they were released.
3. A 46-gram golf ball and a 400-gram soccer ball were released at the same time from the top of a tall tower. What is the best explanation of this picture?
I
O A Heavier objects always fall faster than lighter objects.
O B. Lighter objects always fall faster than heavier objects
O C. The soccer ball was affected by air resistance less than the golf ball
O D. The soccer ball was affected by air resistance more than the golf ball.
Answer:
Do not see a picture or graph but suspect it would show the golf ball falling faster and striking the ground slightly before the soccer ball.
Probably D: Soccer ball was affected by air resistance more than the golf ball.
Explanation:
Even though heavier, friction loss of the greater surface area soccer ball will counter pull of gravity more than the compact golf ball.
In a vacuum, (no friction) both objects fall at the same rate regardless of mass.
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Answer:
That is not meant to be red, it is the bottom of the beaker
That is not meant to be red, it‘s the bottom of the beaker. The star is at the very bottom of the beaker. it’s just the base of the beaker.
A boy standing at one end of a floating raft that is stationary relative to the shore walks to the opposite end of the raft, away from shore. As a consequence, the raft (a) remains stationary, (b) moves away from the shore, or (c) moves toward the shore. (Hint: Use Conservation of Momentum)
Answer:
(c) moves toward the shore.
Explanation:
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
The law of conservation of momentum states that the total linear momentum of any closed system would always remain constant with respect to time.
In this scenario, a boy standing at one end of a floating raft that is stationary relative to the shore walks to the opposite end of the raft, away from shore. As a consequence, the raft moves toward the shore because the momentum of the closed system (boy and raft) has a zero magnitude and would remain constant.
How should the mass of a harmonic oscillator be changed to double the frequency? Can the frequency be tripled by a suitable adjustment of the mass?
Answer:
a. [tex]m' = \frac{m}{4}[/tex]
b. [tex]m' = \frac{m}{9}[/tex]
Explanation:
The frequency of a harmonic oscillator is given by the following formula:
[tex]\omega = \sqrt{\frac{k}{m}}[/tex] ----------------- equation (1)
a.
In order to double the frequency of this oscillator:
ω' = 2ω
m' = ?
Therefore,
[tex]\omega ' = 2\omega = \sqrt{\frac{k}{m'}}[/tex]
using equation (1):
[tex]2 \sqrt{\frac{k}{m}} = \sqrt{\frac{k}{m'}}\\\\ \frac{4}{m} = \frac{1}{m'}[/tex]
[tex]m' = \frac{m}{4}[/tex]
a.
In order to triple the frequency of this oscillator:
ω' = 3ω
m' = ?
Therefore,
[tex]\omega ' = 3\omega = \sqrt{\frac{k}{m'}}[/tex]
using equation (1):
[tex]3\sqrt{\frac{k}{m}} = \sqrt{\frac{k}{m'}}\\\\ \frac{9}{m} = \frac{1}{m'}[/tex]
[tex]m' = \frac{m}{9}[/tex]
A) To double the Frequency of a harmonic oscillator ;
Divide the mass by four i.e. m₁ = m / 4
B) To triple the frequency of a harmonic oscillator :
Divide the mass by nine (9) i.e. m₂ = m / 9
Given that The frequency of a harmonic oscillator is expressed as
[tex]w = \sqrt{\frac{k}{m} }[/tex] -- ( 1 )
A) Doubling the frequency
[tex]2w = \sqrt{\frac{k}{m_{1} } }[/tex] ---- ( 2 )
Applying equation ( 1 ) and ( 2 )
[tex]2\sqrt{\frac{k}{m} } = \sqrt{\frac{k}{m_{1} } }[/tex]
squaring both sides
( 4 / m ) = 1 / m₁
∴ m₁ ( new mass ) = m / 4
B) Tripling the frequency
3w = [tex]\sqrt{\frac{k}{m_{2} } }[/tex] ---- ( 3 )
applying equation ( 1 ) and ( 3 )
[tex]3 \sqrt{\frac{k}{m} } = \sqrt{\frac{k}{m_{2} } }[/tex]
squaring both sides
( 9 / m ) = 1 / m₂
∴ m₂ = m / 9
Hence we can conclude that To double the Frequency of a harmonic oscillator m₁ = m / 4 and To triple the frequency of a harmonic oscillator : m₂ = m / 9
Learn more : https://brainly.com/question/20050933
3.A bridge usually has expansion joints. They allow the bridge to become slightly longer when it
experiences thermal expansion. Look at the diagram below of the bridge joint. When the weather
becomes cool, the "teeth" of the joint move away from each other. When the weather becomes
warm, they move toward each other. Which statement is true about the particles that make up the
bridge?
A.When the sides of the joint are close together, the particles have more kinetic energy
than they do when the sides are farther apart.
B.When the sides of the joint are far apart, the particles have more kinetic energy than
they do when the sides are closer together.
C.The particles contain the same amount of kinetic energy no matter how much the
bridge has expanded.
D. The kinetic energy of the particles changes, but the amount it changes does not
depend on the temperature of the bridge.
Answer:
a) When the sides of the joint are close together, the particles have more kinetic energy than they do when sides are farther apart.
Explanation:
What is the maximum speed that a 2200 kg car can go around a level circular track with a radius of 30.0 m without slipping if the coefficient of static friction between the tires and the road is 0.900?
Answer:
The maximum speed of turn on the given circular track is 16.27 m/s.
Explanation:
Given;
mass of the car, m = 2200 kg
radius of the track, r= 30 m
coefficient of static friction between the tires and the road, μ = 0.9
The net vertical force on the car = N = mg
The net horizontal force on the car = Centripetal force
The coefficient of static friction is given as;
[tex]\mu = \frac{F_c}{N} \\\\[/tex]
[tex]F_c = \mu N\\\\\frac{mv^2}{r} = \mu mg\\\\ \frac{v^2}{r}= \mu g\\\\v^2 = \mu gr\\\\v = \sqrt{\mu gr}[/tex]
where;
v is the maximum speed of turn
[tex]v = \sqrt{\mu gr} \\\\v = \sqrt{0.9 \times 9.8 \times 30 } \\\\v = 16.27 \ m/s[/tex]
Therefore, the maximum speed of turn on the given circular track is 16.27 m/s.
Please help I’m confused on this
Answer:
inversely proportional to