Which statement is not accurate about correcting charting errors?
a) Insert the correction above or immediately after the error.
b) Draw two clear lines through the error.
c) In the margin, initial and date the error correction.
d) Do not hide charting errors.

The two primary drivers that support the need for network automation are policy-derived provisioning of resources and increasing reliance on self-diagnostic and self-healing. Policy-derived provisioning of resources involves using automation tools to ensure that network resources are provisioned based on predefined policies.

This helps to reduce errors and increase consistency in the network, while also enabling more efficient use of resources. By automating the provisioning process, network administrators can save time and reduce the risk of human error. Increasing reliance on self-diagnostic and self-healing is another key driver for network automation. This involves using automation tools to monitor network performance and detect issues before they become major problems.

By automating the diagnostic and healing processes, network administrators can save time and reduce the risk of downtime caused by manual error. Eliminating training needs, providing a ship entry point for resource provisioning, and reducing hardware footprint are not primary drivers for network automation. While these benefits may be achieved through automation, they are not the main reasons why network automation is necessary. The two primary drivers that support the need for network automation are: Increasing reliance on self-diagnostic and self-healing (Option B)
Network automation enables networks to diagnose and resolve issues automatically, improving efficiency and reducing downtime. Policy-derived provisioning of resources (Option C) Network automation allows for the implementation of policy-based resource provisioning, ensuring that resources are allocated and managed according to predefined rules and guidelines. This streamlines the process and enhances overall network performance. In summary, the two primary drivers supporting the need for network automation are increasing reliance on self-diagnostic and self-healing (B) and policy-derived provisioning of resources (C).

To know more about network visit:

https://brainly.com/question/29350844

#SPJ11

The instruction "call sum" is a subroutine call instruction that transfers control to a subroutine named "sum" in the program. It does this by saving the current program state and branching to the memory address where the "sum" subroutine is located.

The subroutine is expected to perform some specific computation and may return a value or modify registers before returning control back to the instruction following the "call sum" instruction. When the "call sum" instruction is executed, it typically involves the manipulation of registers to facilitate the subroutine call. The instruction may save the return address, which is the memory address of the instruction following the "call sum" instruction, in a designated register or on the program stack. This allows the program to resume execution from the correct location once the subroutine finishes. Additionally, the instruction may set up registers or pass parameters to the subroutine, enabling the subroutine to access necessary data or perform calculations. The specific register usage and parameter passing mechanism may vary depending on the architecture and programming language used.

Learn more about program here: https://brainly.com/question/30613605

#SPJ11

The correct change to the sort method that would correctly sort the integers in elements into descending order is the second code segment, which replaces lines 15 to 17 with.

line 15: int temp equals elements, open square bracket, index, close square bracket, semicolon. line 16: elements, open square bracket, index, close square bracket, equals elements, open square bracket, j, close square bracket, semicolon. line 17: elements, open square bracket, j, close square bracket, equals temp, semicolon.

The first code segment would sort the integers in ascending order, and the third code segment would reverse the order of the elements without sorting them. Therefore, the correct answer is ii only. To correctly sort the integers in elements into descending order, you should make the following change to the sort method: Replace line 9 with:  Line 9: if (elements[k] > elements[index]) So the correct answer is: I only.

To know more about code segment visit:

https://brainly.com/question/30614706

SPJ11

Catheterization is the process of inserting a thin, flexible tube known as a catheter into the body for various medical purposes. One such purpose is for a hysterosalpingography (HSG), which is a procedure used to examine the uterus and fallopian tubes. During an HSG, a contrast material is introduced into the uterus through the cervix, and X-ray images are taken to detect any abnormalities.

The catheter used for an HSG is typically a specialized one with a balloon on the end that is inflated after insertion to keep it in place. The catheter is gently inserted through the cervix and into the uterus. The contrast material is then slowly introduced through the catheter while X-ray images are taken. The contrast material is visible on the X-ray, allowing the healthcare provider to see any blockages or abnormalities in the uterus and fallopian tubes.

HSG is a relatively quick and non-invasive procedure that is typically performed in an outpatient setting. Some women may experience mild cramping or discomfort during the procedure, but this usually subsides quickly. After the procedure, patients can resume their normal activities immediately.

In conclusion, catheterization is an important part of the HSG procedure, allowing the contrast material to be introduced into the uterus for imaging purposes. HSG can provide valuable information about the health of the reproductive system and help diagnose issues related to infertility.

To know more about Catheterization visit:

https://brainly.com/question/32276699

#SPJ11

PHP, ASP.NET, and Python. These three languages are widely used for server-side scripting, allowing developers to create dynamic web pages and web applications.

A further explanation of each of these languages. PHP is a server-side scripting language that is popular for creating dynamic web pages and web applications. It is easy to learn and has a large community of developers. ASP.NET is a web framework developed by Microsoft for building dynamic web applications and services. It is based on the .NET framework and can be used with languages such as C# and VB.NET. Python is a high-level programming language that is often used for web development. It has a simple syntax and can be used for a variety of applications, including server-side scripting. An of the other options would also be helpful. C and C++ are programming languages that can be used for server-side scripting, but they are typically used for system programming and may not be as well-suited for web development. CGI (Common Gateway Interface) is a protocol that allows web servers to run external programs and is often used for server-side scripting, but it is not a programming language. JScript, Livescript, and ECMAScript are all scripting languages that are used for client-side scripting (i.e. running scripts on the user's web browser), not server-side scripting. VBS (Visual Basic Scripting) and JScript (Microsoft's implementation of JavaScript) are also scripting languages primarily used for client-side scripting.

The more popular server-side scripting languages include: PHP, ASP.NET, and Python.c. PHP, ASP.NET, and Python Server-side scripting languages are used to manage server-side operations, such as processing data, generating dynamic content, and handling user interactions. PHP, ASP.NET, and Python are widely used for these purposes due to their versatility, efficiency, and large user communities. While other options like a. C, C++, and CGI, b. JScript, Livescript, and ECMAScript, and d. VBS and JScript might have some server-side functionality, they are either outdated, used more commonly for client-side scripting, or not as popular as PHP, ASP.NET, and Python for server-side operations.

To know more about web applications visit:
https://brainly.com/question/28302966

#SPJ11

The correct option that refers to the location and management of cloud infrastructure is (2) Deployment. This term specifically refers to the process of setting up and configuring the various components of a cloud infrastructure, including the physical servers, storage systems, and networking components,

in order to ensure that they work together seamlessly to support the delivery of cloud services. In other words, deployment is the main answer to your question. To provide a more detailed explanation, it's important to understand that cloud infrastructure typically consists of a complex network of interconnected servers, storage devices, and other hardware and software components that are responsible for delivering cloud-based services to end-users. These components must be carefully managed and optimized in order to ensure that they are functioning at peak efficiency and reliability. This is where deployment comes in - it involves the installation, configuration, and management of these various components, as well as the allocation of resources such as CPU, memory, and storage to support the different workloads running in the cloud environment.

In summary, the correct answer to your question is Deployment, and this term encompasses a wide range of activities related to the location and management of cloud infrastructure. I hope this long answer helps to clarify this topic for you!Deployment refers to the location and management of cloud infrastructure. It involves the process of setting up, configuring, and managing the resources required to run applications in a cloud environment. This includes selecting the appropriate infrastructure, configuring security settings, and monitoring performance.

To know more about storage systems visit:

https://brainly.com/question/31677426

#SPJ11

The statement "For compiled programming languages, a package must contain the source code" is true.

This is because compiled programming languages, such as C++, Java, and others, convert the source code into machine code or bytecode, which can be executed directly by the computer. However, in order to compile the source code, the package must contain the necessary source code files. Without the source code, it is impossible to compile the program and create the executable file. Therefore, it is essential for compiled programming language packages to include the source code. In conclusion, the answer to this question is A - Yes.

learn more about compiled programming languages, here:

https://brainly.com/question/28314203

#SPJ11

The logical expression that is equivalent to the statement "there is someone that no one can fool" is option b, which is ¬ƎyⱯx(F(x,y)).

This expression means "it is not the case that there exists a person y such that everyone x can be fooled by y." In other words, there is at least one person who cannot be fooled by anyone. To arrive at this expression, we first translate the original statement as ¬ƎxⱯyF(x,y), using De Morgan's law to get ¬Ǝy¬∀xF(x,y), and then negating the universal quantifier (∀) to get ¬ƎyⱯx(¬F(x,y)). Therefore, option b is the correct choice for a logically equivalent expression to the given statement.

Learn more about logical expression here:

https://brainly.com/question/30038488

#SPJ11

While applying a tourniquet to stop life-threatening bleeding in a child, it is not uncommon for them to start crying and telling you that it hurts, especially before the bleeding is fully controlled.

It is important to reassure them and let them know that you are doing everything possible to help them. In addition to providing reassurance, you should also check the tourniquet to make sure that it is not too tight. If it is causing excessive pain or discomfort, it may be necessary to loosen the tourniquet slightly to relieve the pressure. However, it is important to remember that the tourniquet should only be loosened if absolutely necessary, as it is the most effective way to control life-threatening bleeding. If the bleeding is not fully controlled, it may be necessary to continue tightening the tourniquet until you can no longer tighten it any further. However, it is important to monitor the child closely and seek medical attention as soon as possible, as prolonged use of a tourniquet can cause tissue damage and other complications.

when applying a tourniquet to a child experiencing life-threatening bleeding, and they start to cry, indicating pain before the bleeding is controlled. Here's the answer: In this situation, you should continue to tighten the tourniquet until the bleeding is controlled. It's crucial to prioritize stopping the life-threatening bleeding, despite the child's discomfort. While providing reassurance, make sure to maintain the tourniquet's effectiveness in controlling the bleed.

To know more about life-threatening visit:

https://brainly.com/question/1298783

#SPJ11

The maximum number of characters you can input is 9.

When you enter more than 9 characters, the program will tend to only read and store the first 9 characters. The leftover characters will still be seen in the input buffer.

Within the code, the input character array has been allotted a smartly defined length of 10 as designated by the variable LEN. Due to the allocation of one character for the null character , the maximum capacity for storing characters in the input is limited to nine.

The function getnchar() is invoked with an argument of LEN - 1, signifying an attempt to fetch LEN - 1 characters from the input. Only the first 9 characters will be recorded in the input array in case of entering more than 9 characters.

Learn more about  characters  from

https://brainly.com/question/24275769

#SPJ4

To add an 11th element to the vector, we can use the push_back() method in C++. This method adds an element to the end of the vector. In this case, we can add the value 7 to the vector by calling numbers.push_back(7). This will increase the size of the vector to 11 and add the value 7 as the last element.

To add an element to a vector in C++, we can use the push_back() method which adds an element to the end of the vector. In this scenario, an 11th element needs to be added to a vector named numbers of type integer with a size of 10. This can be achieved by calling numbers.push_back(7) which will increase the size of the vector to 11 and add the value 7 as the last element. The push_back() method is a convenient way to add elements to a vector without having to worry about manually resizing the vector or specifying the index of the new element. Overall, the push_back() method is a useful tool for manipulating the size and contents of a vector in C++.

In conclusion, to add an element to a vector in C++, we can use the push_back() method which adds an element to the end of the vector. In this case, to add the value 7 to the vector named numbers with a size of 10, we can call numbers.push_back(7) to increase the size of the vector to 11 and add the value 7 as the last element.

To know more about vector visit:

brainly.com/question/24256726

#SPJ11

The DHCP (Dynamic Host Configuration Protocol) server and the client use broadcasts to communicate with each other. When a client needs to obtain an IP configuration from a DHCP server, it goes through a four-step process.

The first step is the DHCP discover, where the client broadcasts a message on the network to find a DHCP server. The DHCP server will then respond with a DHCP offer, which is the second step. In the DHCP offer, the server provides the client with an available IP address and other configuration information.

The third step is the DHCP request, where the client requests the offered IP address from the DHCP server. Finally, the DHCP server sends a DHCP ACK (acknowledgement) to the client, confirming that the IP address has been assigned. a DHCP client goes through to obtain an IP address from a DHCP server. The correct steps in order are: DHCP Discover  DHCP Offer  DHCP Request DHCP ACK These are the steps that occur when a client is obtaining its IP configuration from a DHCP server.

To know more about DHCP visit:

https://brainly.com/question/31678478

#SPJ11

The statement that is not true is "strings passed as const char* can be modified by the function."

When a string is passed as a const char* argument, it means that the function cannot modify the content of the string. The const keyword is used to indicate that the value of the variable cannot be changed by the function. Therefore, any attempt to modify the string will result in a compilation error.

On the other hand, when a string is passed as a char* argument, the function can modify the content of the string. This is because the char* type does not have the const keyword, and therefore, it allows the function to modify the value of the string.

It is also true that each string library function operates on one or more strings. String library functions are designed to perform operations on strings, such as copying, comparing, concatenating, and searching.

In summary, a char* can be passed as a const* argument, but strings passed as const char* cannot be modified by the function. It is also important to note that each string library function operates on one or more strings.

Learn more about Library here:

https://brainly.com/question/12972296

#SPJ11

The program can be written to correct an extra character in a string by iterating through each character and removing any consecutive duplicate characters.

To implement a program that corrects an extra character in a string, the following steps can be followed:

Declare a string variable to store the input string.

Iterate through each character in the string using a loop.

Check if the current character is the same as the next character. If they are the same, it indicates a duplicate character.

If a duplicate character is found, remove the extra character by shifting the subsequent characters one position to the left.

Repeat steps 3 and 4 until all consecutive duplicate characters are removed.

Print the corrected string as the output.

Here is an example program in C++ that implements the above logic:

#include <iostream>

#include <string>

void removeExtraChar(std::string& str) {

   for (int i = 0; i < str.length() - 1; i++) {

       if (str[i] == str[i + 1]) {

           str.erase(i + 1, 1);

           i--;

       }

   }

}

int main() {

   std::string str = "Excellent time of dday to learn assembly programming";

  removeExtraChar(str);

 std::cout << "Corrected string: " << str << std::endl;

return 0;

}

In the above program, the removeExtraChar function takes the input string and modifies it by removing consecutive duplicate characters. The corrected string is then printed as the output.

Learn more about  string here: https://brainly.com/question/32395836

#SPJ11

The switching technology that reduces the size of a broadcast domain is VLANs (Virtual Local Area Networks).

VLANs enable network administrators to segment the network into smaller logical networks, isolating broadcast traffic and limiting its scope. This improves network performance and security by reducing the amount of unnecessary traffic and limiting the ability of unauthorized devices to access the network. ISL (Inter-Switch Link) and 802.1Q are both protocols used to tag VLAN traffic, while STP (Spanning Tree Protocol) is used to prevent loops in a network topology. However, none of these technologies specifically reduce the size of a broadcast domain like VLANs do.

learn morre about  VLANs here:

https://brainly.com/question/31136256

#SPJ11

The correct answer is False.A VLAN network assigns computers to LAN segments by hardware.

A VLAN (Virtual Local Area Network) network assigns computers to LAN segments virtually rather than by hardware. VLANs use network switches and software-based configuration to group devices into logical network segments, regardless of their physical location. This allows for flexible network management and improves security by segregating network traffic.The assignment of computers to VLANs is typically done based on logical criteria such as department, function, or security requirements, rather than hardware. VLAN membership is usually determined by configuring network switches or routers to assign specific ports or network segments to a particular VLAN.

To know more about network click the link below:

brainly.com/question/29220005

#SPJ11

True, in Java, the condition within the parenthesis of an if statement must be a boolean expression or an integer.

The condition within the parenthesis of an if statement in Java is evaluated as either true or false. Therefore, it must be a boolean expression or an integer. If the condition is a boolean expression, it will be evaluated to true or false. If it is an integer, it will be evaluated to true if the integer is not zero and false if it is zero. Any other type of expression will result in a compilation error. It is important to note that the condition within the parenthesis must be surrounded by parenthesis, and the statements within the if block must be enclosed within curly braces.

The condition within the parenthesis of an if statement in Java must be a boolean expression or an integer. Other types of expressions will result in a compilation error.

To know more about Java visit:
https://brainly.com/question/31561197
#SPJ11

A database is a collection of associated files that functions as a basis for retrieving information. A database is an organized collection of data that can be easily accessed, managed, and updated. The correct answer to this question is "a) database".

It consists of tables, fields, and relationships between data. Databases are used to store and retrieve large amounts of information, such as customer data, inventory, financial records, and much more. They are commonly used in businesses, organizations, and institutions to manage their operations efficiently. On the other hand, spreadsheets, presentations, and word processing documents are other types of computer software that are used for specific purposes, such as analyzing data, creating presentations, and writing documents. However, they do not have the same level of functionality and versatility as a database.

To know more about database visit:

https://brainly.com/question/30163202

#SPJ11

The given relational algebra statement involves three tables - Foo, Bar, and Baz, with conditions specified for each of them.

The goal is to select D and F from Foo table where the X attribute in Foo equals "Bear", and also join the Bar and Baz tables based on their respective attributes.

The first query provided correctly represents this statement by utilizing an inner join on the three tables and selecting only the required columns from Foo table. The condition "Foo.X = Bear" is used to filter the rows in Foo table that match the criteria, and the join conditions "Foo.X = Bar.Z" and "Foo.X = Baz.Z" are used to combine the rows from these tables.

Overall, the query effectively translates the relational algebra statement into SQL code that can be executed on a database to retrieve the desired results.

Learn more about relational algebra here:

https://brainly.com/question/17373950

#SPJ11

The final value of the variable output in the given code fragment is 5.

The code initializes an integer array myarr with 5 elements: {1, 2, 3, 4, 5}. The expression myarr[0] refers to the value at index 0, which is 1. Similarly, myarr[4] refers to the value at index 4, which is 5.

The expression myarr[0] myarr[4] combines the two values using the implicit multiplication operator. Therefore, myarr[0] myarr[4] can be rewritten as 1 * 5, resulting in a final value of 5.

As a result, the variable output will be assigned the value 5 after evaluating the expression.

Learn more about output here:

https://brainly.com/question/17405663

#SPJ11

One type of social media platform that has limited public interaction is a private or closed social network.

A social media platform that has restricted public engagement is a private or enclosed social network. Generally, users need an invitation or authorization to participate in these channels, and their activities and posts are only viewable to authorized members.

Some examples of such platforms could be the exclusive online communities or certain collaboration tools for workplaces. These platforms ensure privacy and exclusivity by limiting access and interactions to a specific group of individuals, thus fostering more intimate communication within the community instead of public interactions.

Read more about social network here:

https://brainly.com/question/30117360

#SPJ1

To properly identify and classify the different features of blood components, you must first understand the different parts of blood. Blood is composed of red blood cells, white blood cells, platelets, and plasma.

Red blood cells, also known as erythrocytes, carry oxygen from the lungs to the rest of the body. They contain hemoglobin, a protein that binds with oxygen.

White blood cells, or leukocytes, help the body fight off infections and diseases. There are different types of white blood cells, including lymphocytes, monocytes, neutrophils, eosinophils, and basophils.

Platelets, also called thrombocytes, are responsible for blood clotting. They stick together to form a clot and prevent excessive bleeding when you're injured.

Finally, plasma is the liquid component of blood. It contains water, proteins, electrolytes, and hormones, among other substances.

Now that we have a basic understanding of the different components of blood, we can properly drag and drop the different features to their appropriate blood component. For example, you could drag "hemoglobin" to "red blood cells," "neutrophils" to "white blood cells," "platelet aggregation" to "platelets," and "electrolytes" to "plasma."

learn more about blood components here:

https://brainly.com/question/32260881

#SPJ11

It is not possible to draw a simple undirected graph g with 3 connected components and 66 edges because of the relationship between the number of edges and the number of connected components in a graph.

In a simple undirected graph, the maximum number of edges can be determined using the formula n(n-1)/2, where n is the number of vertices. In this case, with 12 vertices, the maximum number of edges would be 12(12-1)/2 = 66.If a graph has 66 edges, it means it has the maximum number of edges possible for 12 vertices. This indicates that the graph is a complete graph, where every vertex is connected to every other vertex. In a complete graph, all vertices are in the same connected component, and therefore, it cannot have 3 connected components.

To learn more about  undirected click on the link below:

brainly.com/question/29808460

#SPJ11

The correct answer is: (b) the intermediary sends packets to the target system with the spoofed source address.

A spoofing attack, the intermediary is unaware that the source address has been falsified and forwards the packets to the target system. This can lead to a variety of security issues, such as data theft, denial of service attacks, and more. To prevent spoofing attacks, it is important to implement security measures such as packet filtering and source address verification.

In this type of attack, adversaries send packets to an intermediary (e.g., a server) with a spoofed source address of the actual target system. The intermediary, unaware of the spoofed address, sends packets to the target system using the provided (spoofed) source address.

To now more about spoofed source  visit:-

https://brainly.com/question/29987719

#SPJ11

The term "nomophobia" was coined by British researcher and psychologist, Dr. David Pittman, to describe the fear of being without one's smartphone.

Pittman conducted a study in 2010 which revealed that 53% of mobile phone users in the UK experienced anxiety when they lost their phone, ran out of battery, or had no network coverage. He later defined nomophobia as "a 21st-century phobia" and a "new term to describe the fear of being out of mobile phone contact."
Nomophobia has become a common phenomenon in today's society, as smartphones have become ubiquitous and essential tools for communication, entertainment, and work. People with nomophobia experience symptoms such as restlessness, irritability, panic, and even physical discomfort when they are separated from their phones or cannot use them. The fear of missing out (FOMO) on important updates, messages, or social media notifications also contributes to the development of nomophobia.
Several studies have highlighted the negative impact of smartphone addiction and nomophobia on mental health, sleep, relationships, and productivity. It is important to recognize the signs of nomophobia and to take steps to reduce the dependence on smartphones, such as setting boundaries, using digital detox strategies, and seeking professional help if necessary.

Learn more about society :

https://brainly.com/question/12006768

#SPJ11

False. Scheduling algorithms are typically implemented in the input port of a router, not in the output port.

The purpose of a scheduling algorithm is to manage the incoming packets and determine the order in which they are transmitted from the input port to the output port of a router.

In the input port, the scheduling algorithm decides which packet should be transmitted next based on certain criteria such as priority, fairness, or quality of service requirements. It helps in managing the contention for the shared resources within the router.

Once the packet is selected by the scheduling algorithm in the input port, it is then forwarded to the appropriate output port for transmission. The output port of a router is responsible for physically transmitting the selected packet to its destination.

Therefore, scheduling algorithms are primarily implemented in the input port of a router, not in the output port.

Learn more about router here:

https://brainly.com/question/31845903

#SPJ11

A:  The method signatures for setCenter and setRadius are missing the return type.

There is a semicolon after the class declaration, which should be removed

Corrected code:

class Circle {

 private:

   double centerx;

   double centery;

   double radius;

 public:

   void setCenter(double x, double y);

   void setRadius(double r);

};

void Circle::setCenter(double x, double y) {

 centerx = x;

 centery = y;

}

void Circle::setRadius(double r) {

 radius = r;

}

B:  There is a semicolon after the class declaration, which should be removed

There should not be a semicolon after "Private" in the class declaration

The function definition for moonweight is missing a return type

The input operator (>>) and output operator (<<) in the main program are reversed

Corrected code:

class Moon {

 private:

   double earthweight;

   double moonweight;

 public:

   Moon(double ew); // Constructor

   double getMoonweight();

};

Moon::Moon(double ew) {

 earthweight = ew;

 moonweight = earthweight / 6;

}

double Moon::getMoonweight() {

 return moonweight;

}

int main() {

 double earth;

 cout << "What is your weight? ";

 cin >> earth;

 Moon lunar(earth);

 cout << "On the moon you would weigh " << lunar.getMoonweight() << endl;

}

Learn more about setRadius here:

https://brainly.com/question/32164582

#SPJ11

Answer:

A) shadow systems

Explanation:

Shadow systems are frequently-seen departmental systems (usually spreadsheets) that the more technically inclined members of business groups create for their co-workers to use to gather and analyze data on their own when they do not want to work with IT or cannot wait for them.

Databases that are smaller than enterprise databases and focus on their creators' specific information requirements are known as shadow systems.

Shadow systems are created by individuals or departments within an organization to meet their own specific needs and requirements that are not addressed by the main enterprise database. These systems are not sanctioned by the IT department and are not managed or maintained by the organization.

Shadow systems can be problematic for organizations as they can lead to data duplication, inconsistencies, and security issues. They also do not integrate well with the main enterprise database, which can lead to data silos. Shadow systems can also create difficulties in data governance and compliance, as the data stored in these systems may not be subjected to the same standards and regulations as the enterprise database.

To know more about Databases visit:-

https://brainly.com/question/30163202

#SPJ11

Examples of vector graphics include A. logos and B. blueprints. Vector graphics are created using mathematical equations and can be scaled up or down without losing their quality. Logos and blueprints are often created as vector graphics because they need to be precise and scalable.

Photos and D. typefaces, on the other hand, are not examples of vector graphics. Photos are raster images, which are made up of pixels, and cannot be scaled up without losing quality. Typefaces, while they can be created as vector graphics, are typically used as raster images in digital media and print. In summary, the examples of vector graphics include logos and blueprints.

examples of vector graphics include: Logos, Blueprints, By configuring the settings, users can set restrictions on who can access certain files or applications, which devices can connect to the computer, and what actions can be performed on the computer. By implementing the security policies, users can increase the overall security of their computer and prevent potential security breaches. True. The Task Scheduler is a tool in Windows operating systems that allows users to automate tasks on their computer. Users can schedule tasks to run at specific times or intervals, start programs or scripts, and stop services. The Task Scheduler can help users save time and improve productivity by automating repetitive tasks. Additionally, users can also use the Task Scheduler to perform maintenance tasks such as system backups or updates. Overall, the Task Scheduler is a useful tool that can help users streamline their workflow and improve the efficiency of their computer.faces Vector graphics are commonly used for these types of designs because they can be easily resized without losing quality. Photos (C) are not vector graphics, as they are raster images composed of pixels.

To know more about graphics visit:

https://brainly.com/question/14191900

#SPJ11

When managing a network that uses IPv6 addressing, there are several methods for address assignment. In your specific scenario, clients connect devices to the network, generate an interface ID, and use NDP (Neighbor Discovery Protocol) to learn the subnet prefix and default gateway.

The IPv6 address assignment method being used in this situation is called Stateless Address Autoconfiguration (SLAAC). SLAAC allows devices to automatically generate their own IPv6 addresses by combining a network prefix, learned from NDP, with their own generated interface ID. This enables the device to have a unique IPv6 address without needing a manual configuration or the involvement of a DHCP server. In the network scenario you provided, the IPv6 address assignment method being used is Stateless Address Autoconfiguration (SLAAC), as it allows clients to generate their own interface ID and use NDP to learn the subnet prefix and default gateway.

To learn more about IPv6 addressing, visit:

https://brainly.com/question/4594442

#SPJ11