why did pbcl2 dissolve upon addition of water. what did adding water do to the concentration of ions?

The increased distance across the cell will result in an increase absorbance reading.

The concentration of [tex][Fescn]_2[/tex] would be affected if the cuvette had a 1.5 cm path length rather than the 1.0 cm value used.Since the absorbance of a sample is proportional to the concentration of a sample (as described by the Beer-Lambert law), increasing the path length of the cuvette would result in a decrease in absorbance. This means that the concentration of the sample would be lower than if the 1 cm path length was used. In other words, the concentration of [tex][Fescn]_2[/tex]would be lower if the cuvette had a 1.5 cm path length than if it had a 1.0 cm path length.

learn more about cuvette Refer:brainly.com/question/29385690

#SPJ1

I would argue against Tony's claim that the temperature of a solid cannot be measured, just because solids do not have a lot of thermal expansion.

Thermal expansion is the tendency of materials to change in size, shape, or volume in response to changes in temperature.

There are several ways to measure the temperature of solids. One common method is to use a thermometer, which can be inserted into the solid to measure its temperature. Another method is to use an infrared thermometer, which measures the temperature of a solid by detecting the amount of infrared radiation it emits.

Second, while it is true that solids have a lower coefficient of thermal expansion than liquids or gases, they still expand and contract with changes in temperature. This is evident in Valdez's example of the wooden door, which becomes difficult to open in the summer when the temperature is higher, and easier to open in the winter when the temperature is lower. This change in the size of the door is due to thermal expansion and contraction of the wood.

To find out more about thermal expansion, visit:

https://brainly.com/question/30242448

#SPJ1

Answer: The type of chemical formula that tells how many atoms of each element are in a molecule but does not indicate their arrangement is a molecular formula.

What is a molecular formula?

A molecular formula is a chemical formula that displays the exact number of atoms of each element in one molecule of a compound, but it does not reveal how the atoms are arranged in a molecule.

A molecular formula is a symbolic representation of a molecule’s elements and the number of atoms of each element present in one molecule of that substance.

A molecular formula provides information about the kinds of atoms present in a molecule and the number of each kind of atom present, but it does not provide information about the structure of the molecule.

In other words, a molecular formula only tells us the number of atoms of each element present in a molecule and not their arrangement.

What is a chemical formula?

A chemical formula is a method of expressing the structure of a molecule in a short, concise form. Chemical formulas depict the number of atoms of each element in a molecule using chemical symbols, numerals, and other chemical shorthand. Chemical formulas can be used to represent both ionic and covalent compounds.

Learn more about molecular formula here:

https://brainly.com/question/28647690#

#SPJ11

The toxic substance that is responsible for the symptoms of the flushing syndrome is acetaldehyde.

Flushing syndrome is also known as alcohol flush reaction (AFR). It is a condition that occurs after alcohol consumption. It is a genetic predisposition that results in the body's inability to metabolize and break down acetaldehyde efficiently.

Acetaldehyde is produced when alcohol is metabolized by the liver. Flushing syndrome symptoms include facial flushing, rapid heartbeat, nausea, vomiting, abdominal pain, headache, dizziness, light-headedness, sweating and redness of the skin.

Acetaldehyde is a toxic substance that is responsible for the symptoms of the flushing syndrome. The toxic substance is produced when alcohol is broken down by alcohol dehydrogenase in the liver.

Acetaldehyde is then broken down into acetate by the enzyme acetaldehyde dehydrogenase. However, if acetaldehyde is not metabolized efficiently, it can cause the flushing syndrome.

Thus, the flushing syndrome occurs when there is an accumulation of acetaldehyde in the bloodstream.

Learn more about acetaldehyde: https://brainly.com/question/28945966

#SPJ11

The physical process that is primarily responsible for the purification achieved during recrystallization is the process of selective solubility.

The process of selective solubility refers to the ability of a substance to selectively dissolve in a particular solvent or a combination of solvents. The substance that is more soluble in a solvent will dissolve in that solvent while the impurities that are less soluble will remain undissolved.

The process of recrystallization is used to purify a solid that contains impurities. In this process, a solid is dissolved in a solvent that is heated to the boiling point. Once the solution is saturated, it is cooled slowly, and crystals are allowed to form. During recrystallization, the impurities are excluded from the growing crystals because of their lower solubility in the solvent, and the crystals that form are pure.

Therefore, the process of selective solubility is primarily responsible for the purification achieved during recrystallization.

Learn more about selective solubility here: https://brainly.com/question/13198024.

#SPJ11

76.33 grams of NaCl were collected after experiment 1.306 mol were

produced.

Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.

Mass of material / mass of one mole equals the number of moles.

We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.

The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:

Molar mass of NaCl

= (1 x atomic mass of Na) + (1 x atomic mass of Cl)

= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)

= 58.44 g/mol

The mass of gathered NaCl may now be converted into moles using the molar mass:

Mass of NaCl divided by its molar mass yields moles of NaCl.

moles of NaCl = 76.33 g / 58.44 g/mol

moles of NaCl = 1.306 mol

As a result, the experiment generated 1.306 moles of NaCl.

To know more about Moles visit:

https://brainly.com/question/21323029

#SPJ1

A face-centered cubic unit cell is the repeating unit in which type of crystal packing: cubic closest-packed, option B.

Solids can be thought of as having a structure similar to that of a piece of wallpaper in three dimensions. Wallpaper has a recurring pattern that is consistent and runs from edge to edge. Similar repeating patterns may be found in crystals, however in this case, the patterns span three dimensions from one edge of the solid to the other.

By describing the dimensions, form, and content of the most basic repeating unit in the pattern, we may accurately describe a piece of wallpaper. The smallest repeating unit's dimensions, composition, and arrangement on top of one another to form the crystal may be used to characterise a three-dimensional crystal.

Learn more about Unit cell;

https://brainly.com/question/12977980

#SPJ4

Complete question:

A face-centered cubic unit cell is the repeating unit in which type of crystal packing A) hexagonal close-packing B)cubic close-packed C)body centered D)simple E)all of the above

Answer:

From the equilibrium pH, we can find the concentration of H+ ions in solution using the relation:

[H+] = 10^(-pH)

[H+] = 10^(-2.546) = 2.177 × 10^(-3) M

Now we can use the fact that the acid is a weak acid and only partially dissociates to form H+ ions and its conjugate base. Therefore, we can assume that [HA] at equilibrium is equal to the initial concentration of the acid minus the concentration of H+ ions that were produced from the dissociation of the acid.

[HA] at equilibrium = initial concentration of acid - [H+]

[HA] at equilibrium = 1.497 M - 2.177 × 10^(-3) M

[HA] at equilibrium = 1.497 M (since the concentration of H+ ions is negligible compared to the initial concentration of the acid)

Now we can plug in the values we obtained into the Henderson-Hasselbalch equation:

2.546 = pKa + log([A-]/[HA])

2.546 = pKa + log(0/[HA])

2.546 = pKa - log([HA])

log([HA]) = pKa - 2.546

[HA] = 10^(pKa - 2.546)

Since we assumed that the concentration of the conjugate base at equilibrium is negligible, we can assume that [A-] ≈ 0.

Therefore, we have:

pKa = log([HA]/0) + 2.546

pKa = log([HA]) + 2.546

pKa = log(1.497) + 2.546

pKa = 0.174 + 2.546

pKa = 2.72

Therefore, the pKa of the acid is approximately 2.72.

To recognize and test the purity of caffine , the tests which could be performed are melting point determination, UV-visible spectroscopy, and high-performance liquid chromatography (HPLC).

In order to identify that the given substance is caffeine, you can use several analytical techniques. Here are three techniques to characterize caffeine and their applications:

Melting Point Determination:

It is a physical method which is  used in order to determine the purity of a substance. The melting point of caffeine is in the range of 235-238 °C. Hence, by measuring the melting point of the extracted caffeine and comparing it with the expected value of pure caffine, you can confirm that the substance you have extracted is caffeine.

UV-Visible Spectroscopy:

UV-Visible spectroscopy can be used to identify caffeine by analyzing the absorption of UV light by the molecule. Caffeine has a characteristic absorption peak at 273 nm. By measuring the UV spectrum of the extracted caffeine and comparing it to the literature value, you can confirm the presence of caffeine.

High-Performance Liquid Chromatography (HPLC):

It is a widely used technique for the separation, identification, and quantification of substances. By using this technique, you can separate and quantify the different components of the extracted caffeine, including its impurities. By comparing the range of melting point of the caffeine to the peak areas of known standards, you can calculate the purity of your extracted caffeine.

Therefore it can be said that the melting point determination, UV-Visible spectroscopy, and High-Performance Liquid Chromatography are three analytical techniques that can be used to confirm the identity and purity of extracted caffeine.

Learn more about caffine :

https://brainly.com/question/24482629

#SPJ4

The volume 0.200 M NaOH (in mL) needed to completely react with 50.00 mL of 0.0500 M CH₃COOH is 12.5 mL

The volume of NaOH needed can be obtained as shown below:

The balanced equation is given as follow:

CH₃COOH + NaOH -> CH₃COONa + H₂O

CaVa / CbVb = nA / nB

(0.05 × 50) / (0.2 × Vb) = 1

2.5 / (0.2 × Vb) = 1

Cross multiply

1 × 0.2 × Vb = 2.5

0.2 × Vb = 2.5

Divide both side by 0.2

Vb = 2.5 / 0.2

Vb = 12.5 mL

Thus, the volume of NaOH needed is 12.5 mL

Learn more about volume:

https://brainly.com/question/19053582

#SPJ1

Answer: 64.1 grams of HCl were used in the reaction

The given triprotic acid H₃A has pka's of 2.50, 5.75, and 9.25.

The pkb for the base A³⁻ can be calculated using the formula: pka + pkb = 14, where pka is the acid dissociation constant and pkb is the base dissociation constant.

Using this formula, we can first calculate the value of the third pkb as follows:

pka + pkb = 14 ⇒

pkb = 14 - 9.25

= 4.75

Similarly, we can calculate the second pkb:pka + pkb = 14

⇒ pkb

= 14 - 5.75

= 8.25

Now, we can calculate the first pkb:pka + pkb = 14 ⇒ pkb = 14 - 2.5 = 11.5

Therefore, the pkb values for the base A³⁻ are 11.5, 8.25, and 4.75 respectively.

To know more about base dissociation constant click on below link:

https://brainly.com/question/28197409#

#SPJ11

The pressure of the gas is approximately 4.57 atm or 438.629 kPa

The Ideal gas law or general gas equation states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.

It is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that;

First, we need to convert the temperature to Kelvin:

T (K) = T (Celsius) + 273.15

T (K) = 93.5 + 273.15

T (K) = 366.65 K

Now we can substitute the given values into the formula:

PV = nRT

P = nRT / V

P = ( 6 × 0.08206 × 366.65 ) / 41.7

P = 4.33 atm

Convert to kPa by multiplying the pressure value by 101.3

P = ( 4.33 × 101.3 ) kPa

P = ( 4.33 × 101.3 ) kPa

P = 438.629 kPa

The pressure is approximately 4.57 atm or 438.629 kPa.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

Answer: 15.0667

Explanation:

Answer: The volume of gas released from the tank at the peak of Mt. Everest is 37.83 liters.

Explanation: To solve this problem, we can use the general gas law equation:

PV = nRT

where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature (in Kelvin).

We can rearrange this equation to solve for volume:

V = nRT/P

We are given the internal gas pressure of the tank (P) and the volume of the tank (10.0 L). We need to find the volume of gas released from the tank (V). We also know that the temperature and number of moles of gas are constant (assuming no leaks or temperature changes during the climb).

To find the volume of gas released at the peak of Mt. Everest (150 mm Hg), we can use the following steps:

Convert the internal gas pressure of the tank to atm:

3.04 x 10¹ mm Hg x (1 atm / 760 mm Hg) = 0.004 atm

Convert the peak pressure to atm:

150 mm Hg x (1 atm / 760 mm Hg) = 0.197 atm

Plug in the known values to the equation:

V = nRT/P

V = nRT / (0.197 atm)

Solve for V:

V = (nRT) / (0.197 atm)

We can assume that the number of moles of gas, n, and the temperature, T, are constant. R is also a constant (0.08206 L atm / mol K).

So we can simplify the equation to:

V = constant / P

V = k / 0.197

where k is a constant. We can solve for k by using the initial conditions:

10.0 L = k / 0.004

k = 0.04 L atm

Now we can use this value of k to find the volume of gas released at the peak of Mt. Everest:

V = k / 0.197

V = 0.04 L atm / 0.197

V = 0.203 L

But this is the volume of gas at standard conditions (0°C and 1 atm). We need to correct for the temperature and pressure at the peak. To do this, we can use the following equation:

(P1 V1) / (n1 T1) = (P2 V2) / (n2 T2)

where the subscripts 1 and 2 refer to the initial and final states of the gas.

We can assume that n and V are constant, so this equation simplifies to:

P1 / T1 = P2 / T2

We can solve for T2:

T2 = (P2 T1) / P1

T1 is the initial temperature of the gas (room temperature, about 20°C or 293 K). P1 is the initial pressure of the gas (0.004 atm). P2 is the final pressure of the gas (0.197 atm).

T2 = (0.197 atm x 293 K) / 0.004 atm

T2 = 14,502 K

This temperature is obviously not physically realistic, but it shows that the volume of gas is greatly affected by the low pressure and temperature at the peak of Mt. Everest. To correct for this, we can assume that the gas behaves ideally and use the ideal gas law equation:

PV = nRT

We can solve for V:

V = (P2 V1 T1) / (P1 T2)

V = (0.197 atm x 10.0 L x 293 K) / (0.004 atm x 14,502 K)

V = 37.83 L

So the volume of gas released from the tank at the peak of Mt. Everest is about 38 liters.

Hope this helps, and have a great day!

The type of intermolecular force that arises from instantaneous dipole moments is e. London Dispersion Forces. These forces occur due to temporary fluctuations in electron distribution, which create temporary dipoles that attract other nearby molecules.

London dispersion forces, also known as van der Waals forces, are the weakest type of intermolecular force. They arise from the fluctuations in the electron density in atoms and molecules.

When electrons are moving, they create temporary dipoles or instantaneous dipoles. These temporary dipoles attract each other and create an attractive force between the molecules, which is the London Dispersion Force. The strength of this force increases with the number of electrons in the molecule.

For more question on intermolecular force click on

https://brainly.com/question/13588164

#SPJ11

Answer:Gco is 0.953

Explanation:

To find the percent by volume concentration for 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution, we need to use the following equation:

Volume (V) = Concentration (C) x Amount (A)

We know the amount (A) of NaCl is 50.00 ml, and we know the concentration (C) is 50%. Therefore, we can rearrange the equation to solve for V:

V = 50% x 50.00 ml

V = 25.00 ml

We also know that the total volume of the solution is 120.00 ml, so we can subtract 25.00 ml from 120.00 ml to get the volume of the solvent.
120.00 ml - 25.00 ml = 95.00 ml of solvent

To calculate the percent by volume concentration, we need to divide the volume of NaCl (25.00 ml) by the total volume (120.00 ml) and multiply by 100%.
25.00 ml/120.00 ml x 100% = 20.83%

Therefore, the percent by volume concentration of 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution is 20.83%.

Learn more about percent by volume concentration at: https://brainly.com/question/12427481

#SPJ11

A molecule with the same number of protons but different number of electrons is known as an isotope.

Isotopes are atoms of the same element with different numbers of neutrons, and thus different atomic mass.

Isotopes form when an atom gains or loses an electron, resulting in an atom with the same number of protons but a different number of electrons.

Atoms of the same element with different numbers of neutrons are known as isotopes. When an atom gains or loses an electron, the number of protons stays the same but the number of electrons changes.

This change in the number of electrons alters the properties of the atom, and the different forms of the same element are known as isotopes.

The number of electrons in an atom determines how an atom interacts with other atoms.

Atoms with an even number of electrons tend to interact with each other in a more stable manner than atoms with an odd number of electrons.

This is why isotopes of elements that can exist in different forms have different chemical properties.

The isotopes of an element have different weights, and this is the result of the different numbers of neutrons. Isotopes can also have different nuclear properties and different radioactive properties.

In summary, an isotope is a molecule that differs in the number of electrons, but has the same number of protons.

This change in the number of electrons alters the properties of the atom, such as its chemical and nuclear properties.

to know more about isotope refer here:

https://brainly.com/question/11680817#

#SPJ11

The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."

Stars are massive, luminous spheres of plasma held together by their own gravity. They are not composed of rock and metal with a high density, nor are they too big to be an asteroid but too small to be a planet. Stars do rotate on an axis and revolve around a central point, but their defining characteristic is their ability to emit light and heat through the process of nuclear fusion.

What is celestial body?

A celestial body is any object that exists in space, such as a planet, moon, asteroid, comet, star, or galaxy. Celestial bodies are natural objects that are not made by humans, and they are typically studied by astronomers and other scientists who are interested in learning more about the structure, composition, and behavior of the universe. Celestial bodies can be located within our solar system or in distant regions of space, and they can range in size from tiny rocks to massive stars and superclusters of galaxies.

To know more about celestial body, visit:

https://brainly.com/question/28876984

#SPJ1

Complete question is: The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."

The pressure in a 22.0 L cylinder filled with 41.1 g of oxygen gas at a temperature of 331 K is 1.58 atm.

We have,

The volume of the cylinder (V) = 22.0 L

Oxygen gas (O2) = 41.1 g

Temperature (T) = 331 K

We need to find the pressure (P) of oxygen gas in the cylinder.

P = (nRT) / V

Where,

R = 0.0821 L atm K−1mol−1

n = 41.1 g / 32 g/mol (O2 has a molar mass of 32 g/mol)

n = 1.284 mol

P = (1.284 mol × 0.0821 L atm K−1mol−1 × 331 K) / 22.0 L= 123.8 atm

Therefore, the pressure is 1.58 atm.

Thus, we can use the Ideal Gas Law ( PV=nRT) to find the pressure. It relates the pressure, volume, amount of gas, and temperature of a gas:

pv=nRT

To learn more about pressure refer - https://brainly.com/question/30984508

#SPJ11

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethylene cyanohydrin ([tex]C_{2}H_{5}CN[/tex]). The reaction follows this general reaction scheme:

Ethylene oxide + NaCN     →   Ethylene cyanohydrin + NaOH

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

What is Ethyl nitrile?

Ethyl nitrile is an organic compound with the chemical formula [tex]C_{2}H_{5}CN[/tex]. This colorless liquid is a component of some commonly used solvents and in the manufacture of pharmaceuticals, textiles, and insecticides. It is used to generate pesticides, pharmaceuticals, and synthetic rubber during synthesis. The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

Mechanism of Reaction: The reaction between ethylene oxide and sodium cyanide in aqueous ethanol is carried out by the Saponification of Cyanide. Saponification refers to the reaction of a base with a fatty acid to create a soap.

The ethylene oxide undergoes nucleophilic attack by the hydroxide ion to produce a salt. The sodium ethylene oxide salt reacts with NaCN to form an intermediate. This intermediate reacts with [tex]H_{2} O[/tex]to form Ethyl nitrile. Ethylene oxide is a toxic, flammable, and colorless gas. It is used as a sterilant for medical equipment and as a fumigant for spices and foods. It has a sweet odor and can cause eye and respiratory irritation, as well as skin burns. The reaction of ethylene oxide with NaCN in aqueous ethanol generates Ethyl nitrile, which is used in a variety of industries.

For more questions related to ethylene cyanohydrin.

https://brainly.com/question/14919939

#SPJ11

The correct name for the compound is pyrrole.

Pyrrole is a five-membered aromatic heterocyclic compound consisting of one nitrogen atom and four carbon atoms. It is a heterocyclic aromatic organic compound having the chemical formula C4H4NH

Explanation :

What is pyrrole?

Pyrroles are heterocyclic aromatic compounds with a five-membered ring containing four carbon atoms and one nitrogen atom. Pyrrole and its derivatives, which include a nitrogen atom in the five-membered ring, are widely used in organic synthesis.

Pyrrole is a nitrogen-containing organic compound that occurs naturally.

The five-membered ring of pyrrole includes four carbon atoms and one nitrogen atom. It is a strong and stable organic compound that is critical in the synthesis of many organic molecules.

Pyrrole is a fundamental structure in many organic molecules, as well as a fundamental molecule in porphyrins, which are essential compounds in living cells. Pyrrole is often used in organic synthesis as a starting material, and it has a variety of other applications in different fields.

Pyrrole-containing molecules, such as the neurotransmitter serotonin and the heme group of hemoglobin, are important in biological systems.

To know more about the pyrrole https://brainly.com/question/13196842

#SPJ11

If any of the solutions in this experiment are spilled on skin or clothing, the first thing to do is to remove any contaminated clothing immediately.

If the skin has been exposed to the solution, it is important to rinse the affected area with water for 15-20 minutes.

After rinsing, the skin should be dried with a clean towel and monitored for any signs of irritation or discoloration.

If any signs of irritation or discoloration occur, seek medical attention immediately. It is also important to report the incident to a teacher or safety officer and discard any contaminated clothing or material.

to know more about contamination refer here

https://brainly.com/question/24324754#

#SPJ11

A rigid container like a glass bottle cannot change shape, so pressure changes inside it can cause it to rupture. In contrast, a flexible container like an airbag can change shape and accommodate pressure changes without rupturing.

A rigid container, such as a glass bottle, is not capable of changing its shape when the pressure of the gas inside changes. This means that as the temperature of the gas increases, its pressure will also increase, causing the walls of the container to be subjected to an increased force. If the pressure of the gas inside the container continues to rise, the container may rupture or explode.

On the other hand, a flexible container, such as an airbag, is capable of expanding and contracting as the pressure of the gas inside changes. This is because the walls of the container are made of flexible material, such as nylon or polyester. When the pressure of the gas inside the container increases, the walls of the container will expand to accommodate the extra volume. If the pressure of the gas decreases, the walls of the container will contract, reducing the volume of the container.

To know more about the pressure, visit:

https://brainly.com/question/12497098

#SPJ1

The option that best describes the outer shell of the atoms in Group 17 on the illustration of the Periodic Table is "They have 7 electrons."Group 17, also known as the Halogens, is a group of nonmetals that have seven valence electrons. The outermost shell of these atoms contains seven electrons, making them highly reactive. These elements readily

react with metals to form salts.There are seven elements in Group 17: fluorine, chlorine, bromine, iodine, astatine, tennessine, and oganesson. All of these elements have seven valence electrons, which is why they are classified

together in the same group of the periodic table. They all have similar properties, such as high electronegativity, reactivity, and the ability to form ionic compounds. Thus, the statement that "They have 7 electrons" best describes the

outer shell of the atoms in Group 17.

For more similar questions onouter shell

https://brainly.com/question/28565616

#SPJ11

0.493 is the equilibrium constant (k p ) for [tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g) reaction at 500k.

The reaction is given as

[tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g)

At 500 K, the partial pressure of [tex]PCl_5[/tex] is 0.860 atm, [tex]PCl_3[/tex] is 0.350 atm, and [tex]Cl_2[/tex] is 1.22 atm.

To calculate the equilibrium constant ([tex]K_P[/tex]) for this reaction, we need to use the equation

[tex]K_P[/tex] = [[tex]PCl_3[/tex]] [[tex]Cl_2[/tex]] / [[tex]PCl_5[/tex]]

Here, [[tex]PCl_5[/tex]] = 0.860 atm

[[tex]PCl_3[/tex]] = 0.350 atm

[[tex]Cl_2[/tex]] = 1.22 atm

Substituting these values, we get

[tex]K_P[/tex] = (0.350)(1.22) / 0.860

[tex]K_P[/tex] = 0.493

Therefore, the equilibrium constant ([tex]K_P[/tex]) for this reaction at 500 K is 0.493.

Learn more about equilibrium constant: https://brainly.com/question/19340344

#SPJ11

Answer:

contains a sample of gas at stp. what is the pressure of this gas after the sample is heated to 410 k?

The final pressure of the sample of gas is 1.5 atm.

Gay-Lussac's law states that, the pressure of a gas, when its mass and volume are constant is directly proportional to its absolute temperature.

Here,

Initial pressure of the sample at STP, P₁ = 1 atm

Initial temperature of the sample at STP, T₁ = 273 K

Final temperature of the sample, T₂ = 410 K

According to Gay-Lussac's law,

P α T

So, P₁/T₁ = P₂/T₂

Therefore, the final pressure of the sample,

P₂ = (p₁/T₁) T₂

P₂ = (1/273) x 410

P₂ = 1.5 atm

Hence,

The final pressure of the sample of gas is 1.5 atm.

To learn more about Gay-Lussac's law, click:

https://brainly.com/question/2683502

#SPJ2

The metal is most likely to be aluminum, based on the given information. Aluminum has a density of 2.7 g/cm3 and a unit cell edge of 408.2 pm, which closely matches the given density and unit cell edge.

Crystallization is the process in which a material, usually a solid, organizes its molecules into an ordered and symmetrical arrangement.

The crystalline structure of a metal determines its physical properties, including its density and lattice constant.

In this case, the metal crystallizes in a face-centered lattice, which means that the unit cell edge is equal to four times the length of the lattice parameter.

Therefore, the edge of the unit cell, 409 pm, implies that the lattice parameter is equal to 102.25 pm.

Aluminum is the only metal that has a density and lattice parameter close to the given values. Therefore, it is the most likely metal in this situation.

to know more about aluminum refer here:

https://brainly.com/question/9496279#

#SPJ11