The electron arrangement of beryllium (Be) is 1s² 2s².
Beryllium is a silvery-white metal. It is relatively soft and has a low density. Uses. Beryllium is used in alloys with copper or nickel to make gyroscopes, springs, electrical contacts, spot-welding electrodes and non-sparking tools.
This means that beryllium has two electrons in the 1s orbital and two electrons in the 2s orbital. In ascending level order, the number of electrons in each level would be 2, 2.
Know more about beryllium here:
https://brainly.com/question/20669804
#SPJ11
Complete the following equation of transmutation.
14 7N 714N + 42He24He → 17 8O 817O + ________
The missing particle in the transmutation equation is a neutron (10n1n). The balanced equation is 14/7N + 4/2He → 17/8O + 1/0n.
In the given equation, the reactants are nitrogen-14 (14/7N) and helium-4 (4/2He). The products are oxygen-17 (17/8O) and an unknown particle.
To balance the equation, we need to ensure that the total atomic number and mass number are conserved on both sides of the equation. The atomic number (the bottom number) represents the number of protons in an atom, while the mass number (the top number) represents the sum of protons and neutrons.
Starting with the reactants, nitrogen-14 has an atomic number of 7 and a mass number of 14. Helium-4 has an atomic number of 2 and a mass number of 4.
To produce oxygen-17, which has an atomic number of 8, we need to add a neutron (10n1n) to the products. The neutron does not have any charge (0) and contributes to the mass number but not the atomic number.
Therefore, the balanced equation is 14/7N + 4/2He → 17/8O + 1/0n, indicating that a neutron is produced during the transmutation process.
learn more about transmutation Refer: https://brainly.com/question/32385022
#SPJ11
draw lewis structures of cnno2, showing all resonance forms, based on the following two possible skeletal structures for it. be sure to add all lone pairs and non-zero formal charges. do not add arrows between the structures. do not delete the boxes around the structures.
The atom's valence electrons are represented by Lewis Dot structures. An atom has the same number of electrons as its atomic number.
Resonance form :Reverberation is the delocalisation of π electrons (present either in type of unsaturation or in type of solitary sets of electrons) and the subsequent designs are known as Resounding designs.
In other words, resonance is the process of moving electrons freely from one atom to another in a given structure under the condition that
the molecule's bonding framework must not change.The general charge of the framework should stay same.Lewis structure =: O :
.. ║
:O: ------- N ----- C ≡ N :
Lewis structure :
A very simplified representation of a molecule's valence shell electrons is known as a Lewis Structure. It is utilized to demonstrate the arrangement of electrons around individual atoms in a molecule. Electrons are displayed as "specks" or for holding electrons as a line between the two iotas.
Learn more about lewis structure :
brainly.com/question/29619891
#SPJ4
how do antioxidant minerals stabilize free radicals? a. enzymatic destruction b. donate electrons or hydrogens c. phagocytosis d. break down oxidized fatty acids
Antioxidant minerals such as zinc, copper, selenium, and manganese stabilize free radicals through the process of donating electrons or hydrogens.
Free radicals are unstable atoms or molecules that can damage cells and lead to various diseases. Antioxidants work by neutralizing free radicals and preventing them from causing harm. When an antioxidant mineral donates an electron or hydrogen to a free radical, it stabilizes the molecule and prevents it from causing damage to surrounding cells. This is known as the antioxidant defense system. Other methods of free radical neutralization include enzymatic destruction, phagocytosis, and the breakdown of oxidized fatty acids.
To know more about Antioxidant visit:
https://brainly.com/question/13151490
#SPJ11
calculate the ph of a 0.10 m solution of barium hydroxide, ba(oh)2 . express your answer numerically using two decimal places.
The pH of a 0.10 M solution of barium hydroxide is 13.30. Since [tex]Ba(OH)_2[/tex] is a strong base and dissociates completely in water, each molecule of Ba(OH)₂ releases two hydroxide ions.
To calculate the pH of a 0.10 M solution of barium hydroxide (Ba(OH)₂), we first need to determine the concentration of hydroxide ions (OH⁻) in the solution. Therefore, the concentration of OH⁻ ions is 2 x 0.10 M = 0.20 M.
Next, we will calculate the pOH, which is the negative logarithm of the hydroxide ion concentration. In this case, pOH = -log(0.20) = 0.699. Since the sum of pH and pOH is equal to 14, we can determine the pH of the solution by subtracting the pOH from 14.
pH = 14 - pOH = 14 - 0.699 = 13.301
To learn more about pH click here https://brainly.com/question/491373
#SPJ11
what is the electron-pair geometry and molecular structure of ammonia (nh3)?
The electron-pair geometry of ammonia (NH3) is trigonal pyramidal. In NH3, the central nitrogen atom is bonded to three hydrogen atoms and has one lone pair of electrons.
This arrangement of electron pairs results in a trigonal pyramidal geometry. The lone pair of electrons exert greater repulsion than the bonded electron pairs, causing the hydrogen atoms to be pushed closer together and giving the molecule a pyramidal shape. The molecular structure of NH3 is also referred to as trigonal pyramidal, as it describes the actual arrangement of the atoms in the molecule. The nitrogen atom is located at the center of the pyramid, with the three hydrogen atoms forming the base of the pyramid and the lone pair of electrons occupying the apex of the pyramid.
To know more about trigonal pyramidal
https://brainly.com/question/22697472
#SPJ11
a transition metal complex has a a maximum absorbance of 593.7 nm. what is the crystal field splitting energy, in units of kj/mol, for this complex?
The crystal field splitting energy of a transition metal complex has a a maximum absorbance of 593.7 nm is [tex]3.34 * 10^{-19}J[/tex]
To calculate the crystal field splitting energy (Δ) in units of kJ/mol for a transition metal complex with a maximum absorbance of 593.7 nm, we need to use the relationship between Δ and the wavelength of maximum absorbance (λmax) according to the equation:
Δ = hc / λmax
where:
Δ is the crystal field splitting energy,
h is Planck's constant ([tex]6.626 * 10^{-34} Js[/tex]),
c is the speed of light ([tex]2.998 * 10^8 m/s[/tex]),
λmax is the wavelength of maximum absorbance.
First, let's convert the given wavelength from nanometers (nm) to meters (m):
λmax = 593.7 nm = [tex]593.7 * 10^{-9} m[/tex]
Now, we can substitute the values into the equation:
Δ = [tex](6.626 * 10^{-34} Js * 2.998 * 10^8 m/s) / (593.7 * 10^{-9} m)[/tex] = [tex]3.34 * 10^{-19}J[/tex]
To learn more about absorbance click here https://brainly.com/question/29750964
#SPJ11
choose the reagents that will accomplish the following transformation in 2 steps. a) c6h5co3h in ch2cl2 b) nah; then ch3oh c) oso4, then nahso3/h2o d) ch3ona in ch3oh e) h2, lindlar’s cat.
The reagents that can accomplish the desired transformation in two steps are NaH, followed by CH3OH (Option b).
To accomplish the transformation of C6H5CO3H, we need to identify the reagents that can undergo two steps to yield the desired product. Let's analyze each option:
a) C6H5CO3H in CH2Cl2: This reagent is not suitable for the desired transformation.
b) NaH, then CH3OH: This combination of reagents can be used to perform an acid-base reaction followed by an alcoholysis. NaH is a strong base that can deprotonate C6H5CO3H to form the corresponding carboxylate ion. Then, CH3OH can react with the carboxylate ion to give the desired product.
c) OsO4, then NaHSO3/H2O: This reagent combination is used for oxidative cleavage of alkenes and is not applicable to the transformation of C6H5CO3H.
d) CH3ONA in CH3OH: This combination of reagents is not suitable for the desired transformation.
e) H2, Lindlar's catalyst: This reagent combination is used for the hydrogenation of alkynes and is not applicable to the transformation of C6H5CO3H.
Know more about alcoholysis here:
https://brainly.com/question/29410443
#SPJ11
if 65.5 ml of hcl stock solution is used to make 450.-ml of a 0.675 m hcl dilution, what is the molarity of the stock solution?
The first step is to use the formula M1V1 = M2V2, where M1 is the molarity of the stock solution, V1 is the volume of the stock solution used, M2 is the molarity of the diluted solution, and V2 is the final volume of the diluted solution.
Plugging in the values, we get:
M1(65.5 ml) = (0.675 M)(450 ml)
Solving for M1, we get:
M1 = (0.675 M)(450 ml) / (65.5 ml)
M1 = 4.65 M
Therefore, the molarity of the stock solution is 4.65 M.
To determine the molarity of the HCl stock solution, we can use the dilution formula: M1V1 = M2V2, where M1 is the molarity of the stock solution, V1 is the volume of the stock solution, M2 is the molarity of the dilution, and V2 is the volume of the dilution.
Given: V1 = 65.5 mL, V2 = 450 mL, and M2 = 0.675 M. We need to find M1.
Rearrange the formula: M1 = (M2V2) / V1. Now substitute the given values: M1 = (0.675 M × 450 mL) / 65.5 mL. Solve for M1: M1 ≈ 4.63 M.
Therefore, the molarity of the HCl stock solution is approximately 4.63 M.
To know more about solution visit:
https://brainly.com/question/1616939
#SPJ11
Give the missing chemical reagent to complete the equation showing the oxidation of manganese metal. Include the stoichiometric coefficient, if needed. Provide your answer below: ___ (aq) + Mn(s) --> Mn(NO3)2(aq) + H2(g)
To complete the equation showing the oxidation of manganese metal, the missing chemical reagent is nitric acid (HNO3).
In the given equation: ___ (aq) + Mn(s) --> Mn(NO3)2(aq) + H2(g), we are looking for the reagent that would react with manganese (Mn) to form manganese(II) nitrate (Mn(NO3)2) and hydrogen gas (H2).
In this case, nitric acid (HNO3) is the appropriate reagent. The balanced equation for the reaction would be:
3HNO3(aq) + Mn(s) --> Mn(NO3)2(aq) + 2H2(g)
Here, nitric acid reacts with manganese metal to produce manganese(II) nitrate and hydrogen gas. The stoichiometric coefficient of HNO3 is 3 to balance the equation.
Therefore, the missing chemical reagent is nitric acid (HNO3).
learn more about nitric acid Refer: https://brainly.com/question/29769012
#SPJ11
Which of the following compounds contains the MOST polar bonds? Atom (EN): H (2.1); S (2.5); P (2.1); As (2.1); Cl (3.0); Si (1.8); Sb (1.9) EN =electronegativity a. H2S b. PH3 c. AsCl3 d. SiH4 e. SiCl4
The compound with the most polar bonds is AsCl3. To determine this, we need to compare the electronegativity difference between the atoms in each compound. Polar bonds occur when there is a significant electronegativity difference between the two atoms involved in the bond. In AsCl3, As has an electronegativity of 2.1 and Cl has an electronegativity of 3.0. The difference is 0.9, which is the highest among the given options, indicating that AsCl3 contains the most polar bonds.
To determine which compound contains the MOST polar bonds, we need to compare the electronegativity of the atoms involved in each bond. Polar bonds occur when there is a significant difference in electronegativity between the atoms. The larger the difference, the more polar the bond.
In this case, we need to calculate the difference in electronegativity between the two atoms in each compound. The larger the difference, the more polar the bond. Here are the electronegativity values for each atom:
H (2.1); S (2.5); P (2.1); As (2.1); Cl (3.0); Si (1.8); Sb (1.9)
a. H2S: (2.5-2.1) = 0.4
b. PH3: (2.1-2.1) = 0
c. AsCl3: (3.0-2.1) = 0.9
d. SiH4: (2.1-1.8) = 0.3
e. SiCl4: (3.0-1.8) = 1.2
The compound with the largest electronegativity difference (and therefore the most polar bonds) is SiCl4 with a difference of 1.2. Therefore, the answer is e. SiCl4. This compound contains the most polar bonds out of all the given compounds.
To know more about electronegativity visit:
https://brainly.com/question/3393418
#SPJ11
Chemical structure shows a central nitrogen atom with a lone pair of electrons above, single-bonded to three hydrogen atoms, placed left, right, and below.
The bond polarities are
, the molecular shape is
, and the molecule is
.
The chemical structure of ammonia (NH3) has polar bonds, trigonal pyramidal shape, and it is a polar molecule.
In ammonia (NH3), the nitrogen atom is more electronegative than hydrogen. As a result, the nitrogen-hydrogen bonds are polar, with nitrogen having a partial negative charge (δ-) and each hydrogen has a partial positive charge (δ+).
It has a pyramidal molecular shape. The lone pair of electrons on the nitrogen atom pushes the three hydrogen atoms away from it, resulting in a trigonal pyramidal geometry. Ammonia (NH3) is a polar molecule due to the presence of polar bonds and its asymmetric shape.
Learn more about ammonia, here:
https://brainly.com/question/29519032
#SPJ1
The addition of solid Na2SO4 to anaqueous solution in equilibrium with solid BaSO4 willcause
A. no change in [Ba2+] in solution
B. more BaSO4 to dissolve
C. precipitation of more BaSO4
D. an increase in the Ksp of BaSO4
Substance Ksp, 25°C
BaSO4(s) 1.5x 10-9
The addition of solid Na2SO4 to an aqueous solution in equilibrium with solid BaSO4 will cause precipitation of more BaSO4. The correct answer is option C.
When Na2SO4 is added to the solution, it dissociates into Na+ and SO4^2-. The presence of additional sulfate ions (SO4^2-) in the solution will shift the equilibrium of the BaSO4 dissolution reaction towards the formation of more solid BaSO4.
The chemical equation for the dissolution of BaSO4 is:
BaSO4(s) ⇌ Ba2+(aq) + SO4^2-(aq)
By Le Chatelier's principle, when additional sulfate ions are introduced to the system (by adding Na2SO4), the equilibrium will shift to the left to counteract the increase in sulfate ions. As a result, more solid BaSO4 will be precipitated from the solution.
The Ksp value of BaSO4 indicates that it is sparingly soluble, meaning only a small amount of BaSO4 can dissolve in water. Therefore, when more solid BaSO4 is precipitated, it indicates a decrease in the concentration of Ba2+ ions in the solution.
In summary, the addition of solid Na2SO4 to the equilibrium system will cause precipitation of more BaSO4, leading to a decrease in the concentration of Ba2+ ions in the solution.
Learn more about Le Chatelier's principle here:
https://brainly.com/question/29009512
#SPJ11
If 10.0 grams of iron reacts with oxygen, how many grams of iron (III) oxide should be produced ?
Ammonia is produced by reacting nitrogen gas and hydrogen gas.
N_2(g) + 3H_2(g) ⇌ 2NH_3(g) + 92kJ
For each of the following changes at equilibrium, indicate whether the equilibrium shifts toward product or reactants or does not shift:
a) Removing N_2(g)
b) Lowering temperatur c) Adding NH_3(g)
d) Adding H_3(g)
e) Increasing the volume of the container.
If one of the reactants is removed, the equilibrium will shift in the direction that produces more of that reactant to compensate.
a) Removing N₂(g):
According to Le Chatelier's principle, In this case, removing N₂(g) will cause the equilibrium to shift towards the reactants. The reaction will try to produce more N₂(g) to restore the balance.
b) Lowering temperature:
Lowering the temperature of an exothermic reaction. In this case, the equilibrium will shift towards the reactants (N₂(g) and H₂(g)) to absorb more heat and increase the temperature.
c) Adding NH₃(g):
In this case, the equilibrium will shift towards the reactants, N₂(g) and H₂(g), to produce more NH₃(g) and restore the balance.
d) Adding H₂(g):
Adding more H₂(g) will cause the equilibrium to shift towards the products, NH₃(g), to consume the excess H₂(g) and restore equilibrium.
e) Increasing the volume of the container:
In this case, since there are fewer moles of gas on the reactant side, the equilibrium will shift towards the reactants, N₂(g) and H₂(g), to reduce the pressure and restore equilibrium.
To learn more about equilibrium click here https://brainly.com/question/29359391
#SPJ11
what is the product of Cu(s) + O₂(g)
The word equation would be:
Copper solid plus oxygen gas giving solid cupric oxide
Answer:
CuO(s)
Explanation:
This is the product.
what is the freezing point of antifreeze solution created by adding 651 grams of ethylene glycol to 2505 grams of water? kf
Water's freezing point is 0 °C, the antifreeze solution's freezing point is -7.77 °C.
The freezing point of the antifreeze solution created by adding 651 grams of ethylene glycol to 2505 grams of water depends on the value of kf, which is the freezing point depression constant of the solvent. Without knowing the value of kf, it's impossible to calculate the freezing point. However, we can use the equation ΔT = kf * molality to determine the freezing point depression, where ΔT is the change in freezing point, and molality is the number of moles of solute per kilogram of solvent. This calculation can be used to find the freezing point of the solution. First, determine the molality by dividing the moles of ethylene glycol (651 g / 62.07 g/mol = 10.48 mol) by the mass of water in kg (2505 g = 2.505 kg). This gives a molality of 4.18 mol/kg. Next, calculate the freezing point depression: ΔTf = 1.86 °C/m * 4.18 mol/kg = 7.77 °C. Since water's freezing point is 0 °C, the antifreeze solution's freezing point is -7.77 °C.
To know more about molality visit:
https://brainly.com/question/30640726
#SPJ11
when aqueous solutions of cacl2(aq) and na2co3(aq) are mixed, the products are nacl(aq) and caco3(s). what are the spectator ions in this reaction?
The spectator ions in this reaction are the sodium ions and chloride ions.
the spectator ions in this reaction are the sodium ions ([tex]Na^+[/tex]) and chloride ions ([tex]Cl^-[/tex]When aqueous solutions of calcium chloride and sodium carbonate are mixed, the products formed are sodium chloride in aqueous form and calcium carbonate as a solid. The spectator ions in this reaction are the ions that do not participate in the actual chemical reaction and remain unchanged throughout the process. In this case, the spectator ions are the sodium ions and the chloride ions since they are present on both sides of the reaction and do not undergo any chemical changes.
The reaction can be represented as follows:
CaCl2(aq) + Na2CO3(aq) → 2NaCl(aq) + CaCO3(s)
In this reaction, the sodium ions and chloride ions from both calcium chloride and sodium carbonate are present as ions on both sides of the equation. They do not take part in any chemical changes and are therefore considered spectator ions.
The calcium ions from calcium chloride and the carbonate ions from sodium carbonate are the ions that undergo a chemical reaction to form the insoluble precipitate calcium carbonate.[tex]CaCl_2(aq) + Na_2CO_3(aq) → 2NaCl(aq) + CaCO_3(s)[/tex]
Overall, the spectator ions in this reaction are the sodium ions and chloride ions.
Learn more about spectator ions here:
https://brainly.com/question/31200633
#SPJ11
which of the following acids is diprotic? group of answer choices hclo4 hno3 hi h2so4 none of the above
Among the given options, [tex]H_2SO_4[/tex] (sulfuric acid) is the diprotic acid. It can donate two protons (H+) in separate ionization steps, making it diprotic. The other acids listed, [tex]HClO_4[/tex] (perchloric acid), [tex]HNO_3[/tex](nitric acid), HI (hydroiodic acid), are all monoprotic acids, meaning they can donate only one proton.
The term "diprotic" refers to an acid's ability to donate two protons (H+) in separate ionization steps. In the case of [tex]H_2SO_4[/tex], it can donate two protons due to the presence of two acidic hydrogen atoms. In the first ionization step, one proton is released to form the [tex]HSO_4^-[/tex]ion, and in the second ionization step, the remaining proton is released to form the [tex]SO4^2^-[/tex] ion.
On the other hand, [tex]HClO_4[/tex], [tex]HNO_3[/tex], and HI are all monoprotic acids, which means they can donate only one proton during ionization. These acids have only one acidic diprotic atom and, therefore, can undergo a single ionization step, resulting in the formation of [tex]ClO_4^-[/tex], [tex]NO_3^-[/tex], and I- ions, respectively.
Therefore, among the given options, [tex]H_2SO_4[/tex] is the only diprotic acid, while the others are monoprotic acids.
Learn more about diprotic here:
https://brainly.com/question/25703460
#SPJ11
- What is the change in enthalpy when 36.00 g of aluminum reacts with excess ammonium nitrate
(NH4NO3) according to the equation: (5 points)
2A1+ 3NH4NO3 → 3N2 + 6 H₂O + Al2O3 AH = -2030kJ
a weak acid has a pka of 6.45; 7 ml of 1.5 m naoh is added to 200 ml of a 2.0 m buffer of this acid at ph 7.0. what is the final ph?
The final pH of the solution after adding the NaOH is approximately 4.87.
To determine the final pH after adding 7 ml of 1.5 M NaOH to a 200 ml buffer solution of a weak acid with a pKa of 6.45, we need to consider the Henderson-Hasselbalch equation. The Henderson-Hasselbalch equation relates the pH of a buffer solution to the pKa and the ratio of the conjugate base to the weak acid.
First, we calculate the moles of the weak acid initially present in the buffer solution:
Moles of weak acid = volume of buffer (L) × concentration of weak acid (M)
= 0.200 L × 2.0 M
= 0.400 moles
Next, we calculate the moles of the added NaOH:
Moles of NaOH = volume of NaOH (L) × concentration of NaOH (M)
= 0.007 L × 1.5 M
= 0.0105 moles
Since NaOH is a strong base, it completely reacts with the weak acid in the buffer to form the conjugate base.
Moles of conjugate base = moles of added NaOH
= 0.0105 moles
Now, we can calculate the ratio of the conjugate base to the weak acid:
Ratio of conjugate base to weak acid = moles of conjugate base / moles of weak acid
= 0.0105 moles / 0.400 moles
= 0.02625
Using the Henderson-Hasselbalch equation:
pH = pKa + log10(conjugate base/weak acid)
= 6.45 + log10(0.02625)
= 6.45 + (-1.58)
= 4.87
For more such questions on NaOH
https://brainly.com/question/31997028
#SPJ8
In the Bohr model of the hydrogen atom, an electron in the lowest energy state moves at a speed of 2.19 * 106 m/s in a circular path of radius 5.92 * 10-11 meters. What is the effective current associated with this orbiting electron?
The effective current associated with the orbiting electron in the lowest energy state is approximately 4.84 x 10^-4 A.
To calculate the effective current associated with the orbiting electron in the Bohr model, we can use the formula for the current in a circular path:
I = (q * v) / (2πr)
where I is the current, q is the charge of the electron (-1.6 x 10^-19 C), v is the velocity of the electron, and r is the radius of the circular path.
Given:
Charge of the electron, q = -1.6 x 10^-19 C
Velocity of the electron, v = 2.19 x 10^6 m/s
Radius of the circular path, r = 5.92 x 10^-11 meters
Substituting these values into the formula:
I = (-1.6 x 10^-19 C * 2.19 x 10^6 m/s) / (2π * 5.92 x 10^-11 meters)
Calculating the effective current:
I ≈ -4.84 x 10^-4 A
The negative sign indicates the direction of the current flow, which is opposite to the conventional direction.
For more such questions on electron
https://brainly.com/question/26084288
#SPJ8
What could you do to obtain supporting evidence for the existence of a charge- transfer (or ion pair) intermediate in the quenching process? For example,
AN^4+CB_4→(AN^+ )(CB〖r_4〗^- )→AN+CBr_4
To obtain supporting evidence for the existence of a charge-transfer (or ion pair) intermediate in the quenching process, several experimental techniques can be employed:
Spectroscopy: Techniques such as UV-Vis spectroscopy or fluorescence spectroscopy can be used to monitor the absorption or emission of light during the quenching process. If a charge-transfer intermediate is formed, it may exhibit characteristic absorption or emission spectra different from the individual reactants.
Time-Resolved Techniques: Time-resolved spectroscopic methods, such as time-resolved fluorescence or transient absorption spectroscopy, can provide valuable information about the dynamics of the quenching process. By measuring the changes in fluorescence or absorption over very short time scales, the formation and decay of charge-transfer intermediates can be observed.
Electrochemical Methods: Electrochemical techniques, such as cyclic voltammetry, can be used to investigate the redox behavior of the reactants and the formation of charge-transfer complexes. Changes in the electrochemical behavior or shifts in the redox potentials can indicate the presence of ion pair intermediates.
Computational Modeling: Theoretical calculations and molecular dynamics simulations can provide insight into the formation and stability of charge-transfer intermediates. These computational approaches can help predict the energetics and structural properties of the intermediate species.
By employing these experimental techniques, one can gather supporting evidence for the existence of a charge-transfer intermediate in the quenching process and gain a deeper understanding of the underlying mechanisms involved.
Know more about Spectroscopy here:
https://brainly.com/question/13265448
#SPJ11
Which of the following explains how one of the postulates in John Dalton's atomic theory was later subjected to change?
Choice 1
Various scientists found that all atoms of a particular element are identical
Choice 2
Some scientists found that atoms combine in simple whole number ratios to form compounds.
Choice 3
Various scientists found that atoms consist of subatomic particles with varying mass and charge.
Choice 4
Some scientists found that bonds between atoms are broken, rearranged, or reformed during reactions.
Choice 3 explains how one of the postulates in John Dalton's atomic theory was later subjected to change. Various scientists found that atoms consist of subatomic particles with varying mass and charge. This discovery led to the modification of Dalton's postulate that stated that all atoms of a given element are identical. The discovery of subatomic particles such as protons, neutrons, and electrons showed that atoms are composed of these particles, and different isotopes of an element can have varying numbers of neutrons while still belonging to the same element.
if the element with atomic number 63 and atomic mass 212 decays by alpha emission. what is the atomic number of the decay product
if the element with atomic number 63 and atomic mass 212 decays by alpha emission. The new element formed after alpha decay will have an atomic number of 61
Alpha emission occurs when an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons. During alpha decay, the atomic number and atomic mass of the parent nucleus decrease by 2 and 4, respectively. In this case, the parent nucleus has an atomic number of 63 and an atomic mass of 212. When the parent nucleus undergoes alpha decay, it emits an alpha particle (2 protons and 2 neutrons). As a result, the atomic number decreases by 2, and the atomic mass decreases by 4. Therefore, the atomic number of the decay product is 63 - 2 = 61. The new element formed after alpha decay will have an atomic number of 61. It's important to note that the specific element with atomic number 61 cannot be determined solely from the given information. The identity of the element can be determined by considering its atomic number, which is 61 in this case, and consulting the periodic table to find the corresponding element with that atomic number.
Learn more about Alpha emission here:
https://brainly.com/question/18227943
#SPJ11
What is the volume of a solution that can be made from 35.0 grams of silver phosphide if the molarity is 0.250 M?
The volume of the solution which has 35.0 grams of silver phosphide and a molarity is 0.250M is
Given: Mass of solute( [tex]Ag_{3}P[/tex]) (m)= 35.0 grams
Concentration or Molarity of solute ([tex]Ag_{3}P[/tex]) (M) = 0.250 M
The molar mass of solute([tex]Ag_{3}P[/tex] ) = 354.58 grams
Molarity is a unit of concentration measuring the number of moles of a solute per liter of solution.
Molarity= moles of solute/ Volume of the solution (in 1 Litre)
To calculate the volume of the solution, we need to first know the number of moles of solute.
To calculate the number of moles,
n= mass of the solute/ molar mass of solute
n= 35.0/ 354.58
n=0.0987 moles
the volume of the solution= moles of solute/ Molarity
V=n/M
V=0.0987/0.250
V=0.3949 Litres
V= 394.8 mL
Therefore, The volume of the solution is 394.8 mL.
Read more about Molarity:
https://brainly.com/question/29441065
in the reaction: nh3 h2o ⇔ nh4 oh-, what is acting as an acid as we go from right to left?
In the reaction [tex]NH_3 + H_2O[/tex] ⇌[tex]NH_4^+ + OH^-[/tex], the water molecule (H2O) acts as a base as we go from right to left.
The reaction [tex]NH_3 + H_2O[/tex]⇌ [tex]NH_4^+ + OH^-[/tex] involves the interaction between ammonia and water molecules. In this reaction, water acts as a base as we move from right to left.
To understand why water acts as a base in this reaction, we need to consider the concept of conjugate acids and bases. In the forward direction (left to right), ammonia acts as a base and accepts a proton from water, forming the ammonium ion+. In this step, water donates a proton, making it the conjugate acid.
In the reverse direction (right to left), the ammonium ion acts as an acid and donates a proton to the hydroxide ion, forming water again. In this step, water acts as a base and accepts the proton from the ammonium ion, making water the conjugate base.
Learn more about conjugate base here:
https://brainly.com/question/30086613
#SPJ11
If the anode electrode in a voltaic cell is composed of a metal that participates in the oxidation half-cell reaction, what happens to the electrode?
A. There is no chance in anode
B. The anode will lose mass
C. The anode will gain mass
D. Electrons flow to the anode
The correct answer is B. The anode will lose mass. In a voltaic cell, oxidation occurs at the anode electrode and reduction occurs at the cathode electrode.
The anode electrode is where the oxidation half-cell reaction takes place and the metal at the anode undergoes oxidation to form ions. This means that the metal at the anode loses electrons and thus loses mass as it becomes an ion. The electrons that are lost by the metal at the anode flow through an external circuit to the cathode, where they are used in the reduction half-cell reaction. This flow of electrons creates an electric current that can be used to do work. The anode will lose mass as the metal undergoes oxidation.
To learn more about electrode click here https://brainly.com/question/29667817
#SPJ11
(b) assume that the atoms are predominantly iron, with atomic mass 55.9 u. how many atoms are there in this section?
Number of atoms = (mass of section in grams / 55.9 g/mol) x (6.022 x 10^23 atoms/mol).
A general formula to calculate the number of atoms based on the given information. The formula is:
Number of atoms = (mass of section in grams / atomic mass of iron) * Avogadro's number
Using the atomic mass of iron given as 55.9 u and Avogadro's number as 6.02 x 10^23, one can calculate the number of atoms in the section given its mass in grams. To stay within the word count limit of 100 words, I cannot provide an exact calculation. Assuming the atoms in the section are predominantly iron with an atomic mass of 55.9 u, we can calculate the number of atoms. First, we need the mass of the section in grams. Convert this mass to moles using the atomic mass of iron (1 mole of iron = 55.9 g). Finally, use Avogadro's number (6.022 x 10^23 atoms/mole) to find the number of atoms.
Number of atoms = (mass of section in grams / 55.9 g/mol) x (6.022 x 10^23 atoms/mol)
To know more about Avogadro's number visit:
https://brainly.com/question/28812626
#SPJ11
Dispersed phase (solute) is transparent (No Tyndall effect) to light for which of the following mixture True solution Colloidal Suspension O Both A and B O Both B and C
The dispersed phase (solute) is transparent (shows no Tyndall effect) to light in a true solution.
A true solution is a homogeneous mixture where the solute particles are uniformly distributed at the molecular level. The solute particles are typically ions or molecules that are dissolved in a solvent. In a true solution, the size of the solute particles is extremely small, usually on the order of nanometers or smaller. These small particles do not scatter light significantly and therefore do not exhibit the Tyndall effect, which is the scattering of light by suspended particles in a medium.
In summary, only true solutions do not show the Tyndall effect and appear transparent to light, while colloidal suspensions and suspensions exhibit the Tyndall effect due to the presence of larger solute particles.
Learn more about homogeneous mixture here:
https://brainly.com/question/30587533
#SPJ11
compounds a and b are volatile liquids with pure vapor pressures of 266 torr and 444 torr respectively, at 25 oc. equal moles of a and b are mixed at 25 oc to form a solution which has a vapor pressure or 325 torr. which of the following statements is consistent with these observations
The consistent statement is that the vapor pressure of a mixture of volatile liquids is proportional to the mole fraction of each component in the solution.
The vapor pressure of a liquid is a measure of its tendency to evaporate. In this scenario, we have two volatile liquids, compounds A and B, with pure vapor pressures of 266 torr and 444 torr, respectively, at 25 °C. When equal moles of A and B are mixed together at 25 °C, the resulting solution has a vapor pressure of 325 torr.
The mole fraction of a component is the ratio of the number of moles of that component to the total number of moles in the mixture. In this case, since equal moles of A and B are mixed, the mole fraction of A and B in the solution is both 0.5.
According to Raoult's law, the vapor pressure of a component in a mixture is equal to the product of its mole fraction and its pure vapor pressure. Therefore, the vapor pressure of A in the mixture would be 0.5 times its pure vapor pressure (266 torr), which is 133 torr. Similarly, the vapor pressure of B in the mixture would also be 133 torr.
Since the observed vapor pressure of the mixture is 325 torr, which is higher than the vapor pressure of either A or B individually, we can conclude that the mixing of A and B results in a positive deviation from Raoult's law.
To know more about mole visit:
https://brainly.com/question/15356425
#SPJ11