If an igneous rock is in contact with sandstone and the sandstone appears discolored and baked, it can be inferred that the igneous rock is younger than the sandstone.
This is because the heat and pressure generated by the intrusion of the molten igneous rock would have altered the sandstone, creating a zone of contact metamorphism. The high temperatures of the molten rock would have caused the minerals in the sandstone to recrystallize and fuse together, leading to a change in texture and color. This type of contact metamorphism occurs when an intrusion of magma or lava comes into contact with cooler rocks and is a useful tool in determining the relative ages of rocks in an area.
To know more about sandstone click here:
brainly.com/question/13886415
#SPJ4
in the past 50 years, the global hydrological environment has experienced great change due to .
In the past 50 years, the global hydrological environment has experienced great change due to human activities. Human activities that have impacted the global hydrological environment include urbanization, deforestation, agricultural practices, industrial activities, and the burning of fossil fuels.
There have been significant changes in the global hydrological environment over the past 50 years, and the majority of these changes can be attributed to human activities. These activities have had a significant impact on the hydrological cycle, including changes in precipitation patterns, changes in the distribution and availability of water resources, changes in the quality of water resources, and changes in the occurrence and severity of floods and droughts. Urbanization has led to increased impervious surfaces, which has resulted in an increase in runoff and a decrease in infiltration.
Deforestation has led to a decrease in evapotranspiration, which has resulted in a decrease in precipitation. Agricultural practices have led to an increase in irrigation, which has resulted in a decrease in the availability of water resources. Industrial activities have led to an increase in the pollution of water resources, which has resulted in a decrease in the quality of water resources.
to know more about global hydrological environment refer here
https://brainly.com/question/2500154#
#SPJ11
while excavating you discover partially intact bone awl (bone pin). what chronometric dating method would you use to discover its age?
Radiocarbon dating would be the best chronometric dating method to discover the age of a bone awl. Radiocarbon dating is a method of estimating the age of organic materials, such as bone, by measuring the amount of radioactive carbon-14 remaining in the sample.
This method is based on the fact that the atmosphere contains a fixed amount of carbon-14, which is absorbed by plants and animals during their lifetime.
After death, the carbon-14 decays at a constant rate, which can be used to calculate the age of the sample. In addition, the accuracy of radiocarbon dating has been improved by developments in radiometric dating, such as accelerator mass spectrometry, which allows for more precise measurements of the amount of carbon-14 remaining in a sample. By measuring the amount of carbon-14 remaining in a bone awl, it is possible to estimate its age.
Know more about Radiocarbon here
https://brainly.com/question/1035017#
#SPJ11
How can language be a unifying force between two places? (1 point)
O The creation of one official language can bring language speakers together culturally.
O A lingua franca can allow people from different places to communicate and share popular culture.
O Putting toponyms or official documents into one language can encourage people to speak the same language, bringing people
together.
O The development of a new dialect will often bridge cultural gaps and encourage trade between places
Which statement is true about jazz? (1 point)
O The main center of jazz moved from New York to California.
O Jazz was mainly influenced by ranchera.
O Radio led to the decrease in popularity of jazz.
O Radio enabled jazz to spread to a wider audience
Which statement best summarizes some of the ways that non-Christians have influenced European cultures? (1 por
O Non-Christians have influenced rituals practiced in European cultures.
O Non-Christians have changed the calendar so that Christian holidays are no longer celebrated.
O Non-Christians have not influenced European cultures.
O Non-Christians have influenced European cultures through music, food, and architecture
Identify a connection between food and religion in Asia. (1 point)
O Muslims are prohibited from eating pork, and Hindus are prohibited from eating beef.
O Asian religions require rice to be eaten at every meal as the main dish.
O All citizens in a country with a large Hindu population must avoid eating beef.
O Everyone must eat the same ritual foods at holidays regardless of what they believe
What is the religious significance of Jerusalem? (1 point)
O Jerusalem is the only important city to Muslims.
O Jerusalem is only important to Jews.
O Jerusalem is an important religious city to Jews, Christians, and Muslims.
O Jerusalem is an important city to Jews and Christians
How can citizens use population statistics to make smart, informed decisions about advertisements in media? (1 point)
O They can evaluate different population statistics to fact-check media sources.
O They can evaluate different population statistics to decide where to build a community center.
O They can evaluate different population statistics to determine the best target media for their product
O They can evaluate different population statistics to decide where to advertise a restaurant
Demographic transition models use what two population statistics to signify change in a nation's population? (1 point)
O birth rates and death rates
O geographic location and number of people below the poverty line
O education levels and income
O race and birth rates
Which is an example of how the dominant culture can create a negative effect on migration ion? (1 point)
O The dominant culture removes the language barrier in migration processes.
O The mixing of multiple cultures creates a diverse and inclusive society
O The dominant culture can create an identity crisis for migrants
O The dominant culture overwhelms the healthcare infrastructure
Which technique would be most useful in determining why migrants are coming to the Miami (City area of Miami, Florida?
(1 point)
O a case study
O national statistics
O experimental research
O quantitative research methods
Which environmental push factor has affected Micronesia? (1 point)
O earthquakes
O civil war
O rising sea levels
O drought
Which environmental push factor has affected Micronesia? (1 point)
O earthquakes
O civil war
O rising sea levels
O drought
Migration resulting from the recent instability in Northern Africa and the Middle East have created which of these outcomes?
(1 point)
O declining immigration to the U.S. creating job openings
O mass flows of refugees into Europe
O a generational depopulation of young people
O mass migration across the Atlantic Ocean to the U.S
Which pairing of push and pull factors is correct to immigration and emigration? (1 point)
O Push and pull factors create emigration.
O Pull factors create emigration.
O Push factors create emigration.
O Push factors create immigration
Which pairing of push and pull factors is correct to immigration and emigration? (1 point)
O Push and pull factors create emigration.
O Pull factors create emigration.
O Push factors create emigration.
O Push factors create immigration
Answer:
Being directly connected with thinking, language registers and fixes in words, and in words combined into sentences, the results of the process of thinking and achievements of man's cognitive activity, and thus makes possible the exchange of thoughts in human society.
Explanation:
which of the following would be most impacted by the coriolis effect? group of answer choices winds traveling eastward at the equator winds traveling eastward at 60 degrees south a soccer ball kicked during a game at the equator a soccer ball kicked during a game at 60 degrees south
Explanation:
Winds traveling eastward at 60 degrees south would be most impacted by the Coriolis effect. The Coriolis effect is the apparent deflection of moving objects (including winds) when viewed from a rotating reference frame (such as the Earth). The effect is strongest at the poles and decreases towards the equator. At the equator, the Coriolis effect is zero, while at 60 degrees south (a location in the Southern Hemisphere), the effect is quite significant. Therefore, the winds traveling eastward at 60 degrees south would experience a greater deflection due to the Coriolis effect compared to the other options listed. The soccer ball examples are not affected by the Coriolis effect since they are not large enough to experience the effect
__________ occurs when water passes over a waterfall; the force of which creates swirling and eroding at the bottom, which cuts away at its base.
Hydraulic action occurs when water passes over a waterfall; the force of which creates swirling and eroding at the bottom, which cuts away at its base.
What is hydraulic action?Hydraulic action is the erosion of the soil or rocks by the abrasive action of moving water. It refers to the pressure exerted by water on the bed or banks of the river, caused by its velocity. The hydraulic action is the erosion of the banks or bed of a river, resulting from the force of moving water or waves. Water pressure is so great in hydraulic action that it dislodges rock or soil particles and transports them downstream. The swirling action at the base of a waterfall, created by the force of water, is a good example of hydraulic action. Therefore, the correct answer is hydraulic action.
Learn more about Hydraulic action here: https://brainly.com/question/7717216
#SPJ11
what platy, parallel, mineral grains are the most visual aspect of foliated metamorphic rocks? calcite micas feldspars quartz
The most visible platy, parallel, mineral grains in foliated metamorphic rocks are usually micas, followed by calcite, feldspars, and quartz. Micas have a distinct platy structure, making them easily visible. Calcite, feldspars, and quartz are also common, although not as distinct in appearance.
The platy, parallel, mineral grains that are the most visual aspect of foliated metamorphic rocks are micas. Metamorphic rocks are rocks that have undergone a metamorphic process. Heat, pressure, and chemical alteration are all examples of such alterations.
These changes are influenced by geological forces such as plate tectonics, magma intrusion, or mountain-building (orogeny) pressures. They are classified as metamorphic rocks if they exhibit substantial structural or mineralogical adjustments relative to their original state.
Some of the common metamorphic rocks are marble, slate, gneiss, schist, etc. Foliated metamorphic rocks, such as schist and gneiss, have a texture that results from the alignment of mineral grains due to extreme pressure and temperature.
Foliated metamorphic rocks have a parallel arrangement of minerals that gives them a platy or layered appearance. They can be distinguished from unfoliated rocks like quartzite and marble, which lack the layered structure seen in foliated metamorphic rocks. Micas are the most visible aspect of foliated metamorphic rocks.
The minerals in foliated metamorphic rocks tend to be flattened, and they appear as elongated flakes or scales. Micas are the most frequent minerals in foliated metamorphic rocks. They have a tendency to separate into thin, flexible sheets, resulting in a distinctively flaky appearance that is particularly prominent in schist.
Therefore, the platy, parallel, mineral grains that are the most visual aspect of foliated metamorphic rocks are micas.
To know more about metamorphic rocks, refer here:
https://brainly.com/question/1150746#
#SPJ11
where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?
The safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk is South Dakota. Thus, Option D is correct.
This is due to its location in the stable interior of the North American Plate, far away from any active plate boundaries or faults.
South Dakota is located in the stable interior of the North American Plate, which means that it is far away from any active plate boundaries or faults. This location makes South Dakota less likely to experience earthquakes compared to other areas located near plate boundaries or faults.
Although earthquakes can occur anywhere, the risk is lower in South Dakota than in other areas such as California or Alaska. Therefore, South Dakota is considered the safest place among those listed below, in the 48 contiguous states with respect to earthquake seismic risk.
Based on this explanation, the correct answer is D.
The complete question:
Where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?
A. MissouriB. South CarolinaC. All have low seismic riskD. South DakotaE. MaineLearn more about earthquake seismic risk https://brainly.com/question/13758888
#SPJ11
PLS HELP MEE the question is in the photo
Answer:
Explanation:
sorry i don't know it sorry
10,000 cy of gravel have been hauled to a project and put into a conical pile. what diameter of the pile do you expect?
The diameter of a conical pile of 10,000 cy of gravel depends on several factors, such as the angle of repose of the gravel and the particle size of the gravel. Generally, the higher the angle of repose, the larger the diameter of the pile. The particle size of the gravel will also affect the size of the pile; a pile of smaller particles of gravel will form a larger pile than a pile of larger particles.
To estimate the diameter of the conical pile, the angle of repose of the gravel must be known. This can be determined through laboratory tests or by consulting existing literature. If the angle of repose is known, the diameter of the conical pile can be estimated using the following formula:
Diameter = Height * Tan(Angle of Repose).
Thus, if the height of the pile is known, the diameter can be determined by multiplying the height by the tangent of the angle of repose.
In conclusion, the diameter of a conical pile of 10,000 cy of gravel can be estimated by knowing the height of the pile and the angle of repose of the gravel. The angle of repose can be determined through laboratory tests or by consulting existing literature, and the diameter can be estimated using the formula Diameter = Height * Tan(Angle of Repose).
To learn more about gravel here:
https://brainly.com/question/29576396#
#SPJ11
which source reflects the highest degree of authority on the subject of shale-oil deposits in north america?
The source that reflects the highest degree of authority on the subject of shale-oil deposits in North America would be a peer-reviewed scientific journal article written by a recognized expert in the field.
This type of source undergoes rigorous review by other experts in the field and is considered to be the most reliable and authoritative source of information. Additionally, scientific journals often require authors to disclose any potential conflicts of interest or funding sources, adding to their credibility. Other reliable sources of information on shale-oil deposits in North America could include government reports and studies, industry reports, and academic books written by recognized experts in the field.
To know more about shale-oil click here:
brainly.com/question/4327242
#SPJ4
while excavating you find a series of buttons made of shell. good eye! what chronometric dating method would you use to discover their age?
When excavating and finding a series of buttons made of shell, the chronometric dating method that would be used to discover their age is Radiocarbon dating.
What is Radiocarbon dating?Radiocarbon dating is an archeological technique that determines the age of carbon-bearing materials up to 60,000 years old. It is used to date organic materials such as wood, charcoal, and bone, as well as inorganic materials like shell and limestone.
Radiocarbon dating, also known as carbon-14 dating, is a method used to determine the age of organic material by measuring the amount of carbon-14 present. It is based on the fact that carbon-14 (14C) is constantly being created in the atmosphere by the interaction of cosmic rays with atmospheric nitrogen.
The carbon-14 in the atmosphere combines with oxygen to form carbon dioxide, which is then incorporated into plants through photosynthesis. Animals then eat the plants and consume the carbon-14, and this is how it enters the food chain. When an organism dies, it stops taking in carbon-14, and the carbon-14 that was in the organism begins to decay.
This decay is measured by comparing the amount of carbon-14 to the amount of carbon-12 (12C) in the sample. By comparing the ratio of carbon-14 to carbon-12 in a sample with that of a living organism, it is possible to determine the age of the sample.
Based on the aforementioned explanation, the chronometric dating method that would be used to discover the age of the shell buttons found while excavating is Radiocarbon dating.
To know more about Radiocarbon dating, click on the link below:
https://brainly.com/question/12693872#
#SPJ11
true or false: the northern hemisphere of mars experiences long cold winters. question 1 options: true false
The answer is True.
The northern hemisphere of Mars experiences long, cold winters due to the planet's axial tilt and its elliptical orbit around the sun. During Martian winter, the polar regions can experience temperatures as low as -195 °F (-125 °C).
to know more about the northern hemisphere refer to:
https://brainly.com/question/13661560?referrer=searchResults
theorize about what landforms are produced as a result of this tectonic boundary. (give examples by referring to the names of these landforms in south america) is there a particular prominent landscape with huge mountains?
The tectonic boundary between the South American Plate and the Nazca Plate is a convergent boundary. At this boundary, the Nazca Plate is subducted beneath the South American Plate, resulting in the formation of a subduction zone.
As a result, various landforms are produced, including volcanoes, mountains, and oceanic trenches .In South America, one of the most prominent landforms produced by this tectonic boundary is the Andes Mountains.
These mountains stretch along the western edge of South America and are the longest mountain range in the world. They are formed by the collision of the South American Plate and the Nazca Plate.
Additionally, the Nazca Plate is being subducted beneath the South American Plate, resulting in the formation of the Peru-Chile Trench, which is the deepest oceanic trench in the world.
This trench is located off the coast of South America and is over 3,700 miles long. Other landforms produced by this tectonic boundary include volcanoes, such as Cotopaxi in Ecuador and Villarrica in Chile.
For such more question on Nazca Plate:
https://brainly.com/question/14569613
#SPJ11
New snow on a glacier in the first year, which is called __________ snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation.
Answer:
New snow on a glacier in the first year, which is called névé snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation. Névé snow is typically formed by the compaction and recrystallization of snowfall over the course of a single winter season, and it is an intermediate stage in the transformation of snow into glacial ice. As the névé snow becomes more compacted over time, it eventually becomes firn and then glacial ice.
New snow on a glacier in the first year, which is called neve snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation.
What is neve snow?Neve snow is the name given to granular snow that has survived a full year of snowfall, also known as firn snow. It's often referred to as snow that's at the base of a glacier, and it typically appears during the snow accumulation period. The neve snow is partially melted, or undergoes sublimation or evaporation. It is composed of hexagonal snowflakes, also known as "diamond dust" because they sparkle in the sun.The snow turns into a more granular type of ice that looks more like rough, irregular sugar crystals than the characteristic hexagonal snowflakes after being partially melted and refrozen several times. This type of snow is referred to as firn, and it has a high density due to the amount of compressed air trapped between the ice crystals.
Learn more about neve snow here: https://brainly.com/question/26706545
#SPJ11
Imagine that local government is closing your favorite park because of budget cuts. Outline a plan of how you would use the media to try to stop this action. << Read Less
To try to stop the local government from closing my favorite park, I would develop a plan to use the media effectively.
Here's how I would go about it:
Identify key media outlets: Identify the key media outlets in the local area, such as local newspapers, radio stations, and television stations.
Develop a message: Develop a clear and concise message that explains why the park is important and why it should not be closed. The message should be easy to understand and should appeal to a broad audience.
Reach out to the media: Reach out to the media outlets identified in step one and pitch the story. Be sure to provide a copy of the message, as well as any supporting materials.
Organize a protest: Organize a protest to bring attention to the issue. Use social media platforms to advertise the protest, and encourage supporters to attend.
Stay on message: During interviews with the media, stay on message and focus on the key points. Be prepared to answer questions and provide additional information as needed.
Follow up: Follow up with the media outlets and continue to provide updates and additional information as the situation develops. Keep the public informed and engaged in the issue.
Learn more about the local government here: brainly.com/question/30824517
#SPJ4
how does the depression form during a caldera eruption? select one: a. the chamber roof collapses as the magma cools and contracts b. the chamber roof collapses after magma is erupted
During a caldera eruption, the depression forms when the chamber roof collapses as the magma cools and contracts. Option (A) is correct answer.
Caldera eruptions are large volcanic explosions that cause an eruption of volcanic ash and gas. It results from the collapse of a volcanic structure, a volcano or a caldera, often caused by the evacuation of a magma chamber underneath it. Calderas are formed when magma is emptied from the volcano, causing the roof of the chamber to collapse and create a depression.
According to the given options, the depression forms when the chamber roof collapses as the magma cools and contracts. The roof of the magma chamber often cools and contracts after the eruption is over, making it unstable and prone to collapse. As a result, the volcanic structure's roof collapses and forms a depression. Hence, the correct answer is option A.
Learn more about depression caldera eruption
https://brainly.com/question/824390
#SPJ11
what measure do seismologists use to calculate the distance from a seismic receiving station to the epicenter of an earthquake?
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake.
Seismology is the study of earthquakes and seismic waves that propagate through the Earth. Seismic waves are the waves that travel through the Earth's layers and cause earthquakes. These waves have different velocities, which allows seismologists to identify the Earth's internal layers and characteristics.A seismic wave is a ground-shaking energy that originates from the focus or hypocenter of an earthquake. They propagate through the Earth's layers and can be recorded by seismographs. The three main types of seismic waves are primary waves (P-waves), secondary waves (S-waves), and surface waves (L-waves).
Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake. The P-waves are faster and therefore reach the station first. The S-waves are slower and take a longer time to arrive at the station. The time difference between the arrival of P and S waves is measured and used to calculate the distance from the station to the epicenter of the earthquake. This is done using a travel-time graph, which provides the distance from the station to the epicenter.
To know more about seismologists click on below link :
https://brainly.com/question/676287#
#SPJ11
which of the following is true of high pressure areas? question 74 options: they generally involve atmospheric pressures lower than 1000 mb. air converges and ascends within high pressure systems. they are characteristic for areas along the equator. air descends and diverges within high pressure systems.
Air descends and diverges within high pressure systems is true of high pressure areas.
What are high pressure areas?A high-pressure area or anticyclone is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding atmosphere. The divergence of air as a result of the increased pressure leads to clear skies and pleasant weather. A region of high pressure is also referred to as an anticyclone or high. The wind near the surface of the earth will flow away from the high-pressure region due to the rising motion.
In the high-pressure areas, the sinking motion of the air descends, leading to clear skies and pleasant weather. High-pressure regions have descending air currents that produce stable weather patterns. As the air descends, it heats up, causing the moisture to evaporate and leaving the sky free of clouds. As a result, high-pressure areas are usually associated with good weather. Areas of high pressure tend to be connected with clear, blue skies, as opposed to areas of low pressure, which tend to be linked with cloudy, rainy weather. Hence, the answer to the given question is option D, Air descends and diverges within high pressure systems.
For more such questions on High-pressure areas.
https://brainly.com/question/14541204#
#SPJ11
water velocity in a stream varies based on many factors but is usually greater at the mouth than the head. which part of a stream commonly has the highest gradient?
Water velocity in a stream varies based on many factors but is usually greater at the mouth than the head. The part of a stream commonly having the highest gradient is head.
Stream is defined as a body of water, running or moving continuously in a channel or course of considerable width and length. There are a number of different types of streams, each characterized by its size, location, and water velocity.
Some of the important factors that affect water velocity in a stream include the slope of the land, the amount of water in the stream, the shape of the streambed, and the type of sediment in the streambed.
Water velocity is the speed of water in a stream or river. It is the distance the water travels over a particular period of time. Water velocity in a stream is influenced by many factors such as the streambed, the shape of the channel, the amount of water in the stream, and the slope of the land, among others.
Gradient refers to the steepness or slope of a stream channel. The highest gradient in a stream is found at the head. The head is the point where the stream begins or the location where the stream gets its water. As the stream flows downstream, the gradient decreases, and the water velocity decreases.
To know more about Water velocity, click on the link below:
https://brainly.com/question/14461789#
#SPJ11
Find the differences in height between the peak of Mount Hermon and the Sea of Galilee. (How many feet are they apart?) Note: You do not subtract. Since each figure starts at 0, or sea level, you will find the height above and add it to the distance below. The sum gives you the difference in feet above and below sea level.
766 feet
2,500 feet
10,082 feet
10,700 feet
The difference in height between the peak of Mount Hermon and the Sea of Galilee is C. 10, 082 feet .
How to find the difference in height ?The peak of Mount Hermon has an elevation of approximately 9,232 feet above sea level, while the surface level of the Sea of Galilee is approximately 686 feet below sea level.
To find the difference in height between the peak of Mount Hermon and the Sea of Galilee, we need to add the elevation of Mount Hermon to the depth of the Sea of Galilee:
= 9, 232 + 689
= 9, 921 ft
Therefore, the difference in height between the peak of Mount Hermon and the Sea of Galilee is approximately 10, 082 ft from the options.
Find out more on height at https://brainly.com/question/13621018
#SPJ1
in the northern hemispheres, winds spiraling counterclockwise into a low pressure area are question 60 options: anticyclonic. cyclonic. geostrophic. meridional.
The winds spiraling counterclockwise into a low pressure area are called cyclonic.
What is cyclonic flow?A cyclonic flow is a term used in atmospheric physics to describe fluid flow that rotates clockwise in the Southern Hemisphere and counterclockwise in the Northern Hemisphere. Cyclonic flow is the opposite of anticyclonic flow, which is characterized by outward motion around a high-pressure region.
A low-pressure region, also known as a cyclone, causes a spiraling flow of air that rotates counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere. Cyclones are associated with a variety of atmospheric disturbances, such as tropical storms, hurricanes, and tornadoes.
Hence the correct answer is cyclonic.
To know more about cyclonic refer here:
https://brainly.com/question/31188331
#SPJ11
where is light penetration in a river or stream likely to be lowest? a. the source b. the mouth c. the middle portion d. none of the above please select the best answer from the choices provided a b c d
Light penetration in a river or stream is likely to be lowest at the middle portion. The correct option is C.
This is because the middle portion of a river or stream is typically the deepest and has the most sediment, which can block out or reduce the amount of light that penetrates the water.
Additionally, the middle portion is often where the greatest amount of currents and turbulence occur, which can further reduce the amount of light that reaches the bottom of the river or stream.
As light penetration decreases, photosynthesis rates are lowered and the amount of oxygen available to the aquatic life in the river or stream is also reduced. The correct option is C.
To know more about river, click here:
https://brainly.com/question/11260945
#SPJ4
on the hazard city map, the blue feature running through riverside and ralston is a river system. which direction is the river system flowing through hazard city?
On the Hazard City map, the blue feature that runs through Riverside and Ralston is a river system. The direction the river system is flowing through Hazard City is southeast.
Hazard City is an interactive application that is utilized in disaster management training. It is a platform that helps train first responders and emergency managers to respond to both human-made and natural disasters. The application has various functions, which include:- Permitting users to explore a virtual city and discover possible hazards- Permitting users to choose the disaster and create a scenario- Permitting users to select the emergency response teams and resources- Permitting users to watch the scenario play out after setting it up.
The direction of the river system flowing through Hazard City is southeast. The blue feature on the map that runs through Riverside and Ralston is a river system. Hazard City is a virtual city, and the map represents different features in the virtual city. Therefore, the river system flowing through the virtual city is represented by the blue feature on the map.
know more about disaster management here
https://brainly.com/question/13354447#
#SPJ11
the pacific coast of south america has many volcanic mountains and a narrow continental shelf. this is an example of .
The Pacific Coast of South America has many volcanic mountains and a narrow continental shelf, which is an example of a subduction zone. Subduction zones are a type of tectonic boundary where one tectonic plate is sliding underneath another.
It also leads to the formation of a narrow continental shelf due to the subduction of the plate. The oceanic plate is pushed down and causes the edge of the continent to drop, resulting in a shallow seafloor.
Subduction zones are an example of a convergent plate boundary, where two plates are moving towards each other. Subduction zones form a major part of the global tectonic cycle, helping to drive continental drift and mountain formation.
Know more about volcanic mountains here:
https://brainly.com/question/11954011
#SPJ11
where do crevasses form? in the zone of fracture below the zone of fracture at the terminus in icebergs
Crevasses form in the zone of fracture below the terminus of an iceberg. This occurs when an iceberg starts to move down a valley, sliding on the water's surface and encountering different levels of friction. This causes the ice to break and split, creating a crevasse.
Crevasses can also form due to glacier movements and as a result of stress in the ice. As a glacier slides down a valley, it picks up rocks and sediment, causing an uneven surface. This unevenness increases the friction on the glacier, resulting in crevasses. Additionally, stress from water pressure, the weight of the glacier, or winds and currents can cause crevasses.
Crevasses are deep, jagged cracks in glaciers, ranging from a few centimeters to tens of meters deep. They are often difficult to detect, and can be hazardous to anyone crossing them, as they can easily be hidden beneath snow or ice.
To learn more about Crevasses here:
https://brainly.com/question/9657443#
#SPJ11
using the richter scale, an earthquake of magnitude 7.5 releases about how much more energy than one of magnitude 5.5?
The final answer are earthquake of magnitude 7.5 releases about 3,126,339 joules more energy than one of magnitude 5.5.
The Richter Scale measures the energy of an earthquake, and the magnitude of an earthquake is a measure of the amount of energy released by the earthquake.
The formula for the energy released by an earthquake is E = 10^(3/2M + 9.1), where M is the magnitude of the earthquake.
Using the Richter Scale, an earthquake of magnitude 7.5 releases about how much more energy than one of magnitude 5.5?
We can find the difference in energy by using the formula and plugging in the values:
E(7.5) = 10^(3/2*7.5 + 9.1) = 3,162,277 joules
E(5.5) = 10^(3/2*5.5 + 9.1) = 35,938 joules
The difference in energy released by the two earthquakes can be found by subtracting the two values:
E(7.5) - E(5.5) = 3,162,277 - 35,938 = 3,126,339 joules
Therefore, an earthquake of magnitude 7.5 releases about 3,126,339 joules more energy than one of magnitude 5.5.
To know more about earthquakes refer here:
https://brainly.com/question/29500066#
#SPJ11
In the summer, snowfall decreases, and melting increases, which results in the outflow being meltwater, thus leading to an increase in ablation causing an overall __________ budget and glacier shrinkage.
In the summer, snowfall decreases, and melting increases, which results in the outflow being meltwater, thus leading to an increase in ablation causing an overall negative budget and glacier shrinkage.
What is Ablation?Ablation refers to the processes by which a glacier loses ice. The process of ablation is due to both melting and calving. In the context of the given question, the decrease in snowfall and increase in melting result in an increase in ablation, which causes an overall negative budget and glacier shrinkage.
Ablation can be performed for a variety of reasons, including to treat cancer, reduce the size of an organ, or relieve symptoms caused by certain conditions. For example, cardiac ablation is a common procedure used to treat abnormal heart rhythms by destroying small areas of heart tissue that are causing the irregular heartbeat.
Learn more about Ablation here: https://brainly.com/question/29736065
#SPJ11
Explain one spacial change in manufacturing employment patterns as a result of deindustrialization
Answer:
During deindustrialization, the declining share of employment in manufacturing appears to mirror a decline in the share of manufacturing value added in GDP. At first glance, this decline would suggest that domestic expenditure on manufactures has decreased while expenditure on services has increased.
why was the great wall of china built where it was?
Answer:
It was built to protect territory.
Explanation:
The Great Wall of China was built over centuries by China's emperors to protect their territory. Today, it stretches for thousands of miles along China's historic northern border.
how might having a lot of oil affect southwest asia? list at least three ways you think this resource might affect the people and places in this region.
Southwest Asia, also known as the Middle East, is a region that is rich in oil reserves. Here are three examples:
Economic developmentPolitical stabilityEnvironmental challengesWhat is the oil affect?The abundance of this resource has significant impacts on the people and places in the region in several ways.
Economic development: The oil industry is a crucial driver of economic development in Southwest Asia. The oil reserves generate a considerable amount of revenue for the countries in the region, which can be used to fund infrastructure projects, social programs, and other economic development initiatives. For instance, countries like Saudi Arabia and the United Arab Emirates have used their oil revenues to build modern cities and develop their economies.
Political stability: Oil has also played a significant role in shaping the political landscape of Southwest Asia. In some countries, control of oil resources has been a source of conflict and instability. However, in other countries, oil wealth has been used to maintain political stability.
Lastly, Environmental challenges: The oil industry can also have negative environmental impacts on the region. Oil spills, air pollution, and water pollution are all potential hazards associated with oil production and transportation.
Learn more about Oil from
https://brainly.com/question/25614315
#SPJ1