Alternative Z should be chosen by a business based on an annual benefit-cost ratio analysis and a minimum acceptable rate of return of 8%. Alternative Z has the highest B/C ratio and provides additional benefits compared to Alternative Y, with an incremental B/C ratio of 1.194.
To determine the most favorable alternative, we need to calculate the benefit-cost ratio (B/C ratio) for each option. The B/C ratio is obtained by dividing the present value of benefits by the present value of costs.
1. For Alternative X:
Present Value of Benefits (PV(B)) = $159 * ((1 - (1 + 0.08)⁽⁻⁵⁾) / 0.08) = $572.39
Present Value of Costs (PV(C)) = $611
B/C ratio = PV(B) / PV(C) = $572.39 / $611 = 0.937
2. For Alternative Y:
PV(B) = $138 * ((1 - (1 + 0.08)⁽⁻⁵⁾) / 0.08) = $491.32
PV(C) = $498
B/C ratio = PV(B) / PV(C) = $491.32 / $498 = 0.985
To know more about refer here:
#SPJ113. For Alternative Z:
PV(B) = $69 * ((1 - (1 + 0.08)⁽⁻⁵⁾) / 0.08) = $248.27
PV(C) = $211
B/C ratio = PV(B) / PV(C) = $248.27 / $211 = 1.177
Based on the B/C ratios, the business should select Alternative Z, as it has the highest B/C ratio of 1.177.
The last incremental B/C ratio used is the comparison between the best two alternatives. In this case, it would be the B/C ratio of Alternative Z compared to Alternative Y, which is 1.177 / 0.985 = 1.194.
In conclusion, by using an annual benefit-cost ratio analysis and considering a MARR of 8%, the business should choose Alternative Z as it has the highest B/C ratio. The last incremental B/C ratio used was 1.194, indicating the additional benefit gained by choosing Alternative Z over Alternative Y.
To know more about benefit-cost ratio refer here:
https://brainly.com/question/29524053#
#SPJ11
During March Parker Ltd’s sales and purchases were as follows:
Sales (exclusive of VAT) £32,500
Purchases (inclusive of VAT) £23,640
VAT is charged at 20%, there was no opening balance on the VAT control account and no payments were made in the month.
How much output tax was charged during the month? How much input tax was charged during the month? At 31st March, what is the balance on the VAT control account?
The balance on the VAT control account will be £2,560 (£6,500 - £3,940).
During the month of March, Parker Ltd’s sales (exclusive of VAT) were £32,500, and VAT was charged at a rate of 20%. To determine the amount of output tax levied during the month, we need to calculate 20% of the sales figure. This gives us an output tax charge of £6,500.
The purchases made during the month were £23,640, inclusive of VAT. To calculate the amount of input tax charged during the month, we need to determine the VAT component of the purchase amount. This can be done by dividing the purchase amount by 1.20 (which is the equivalent of deducting the VAT rate of 20%). The VAT component is therefore £3,940, the input tax charged for the month.
On 31st March, the balance on the VAT control account will be the difference between the output tax charged and the input tax charged. Therefore, the VAT control account balance will be £2,560 (£6,500 - £3,940).
To know more about VAT click here:
https://brainly.com/question/30984967
#SPJ11
Over/Under: Alpha made the following error and omission: (a) an AJE for a deferred revenue was recorded for $3,200 instead of the correct amount of $2,300 and (b) Alpha recorded the credit purchase of supplies for $800 instead of the correct amount of $600. What effect does all of this have on assets, liabilities, and net income?
(a) The error in the deferred revenue recording results in an overstatement of assets, liabilities, and net income.
(b) The error in the credit purchase of supplies recording results in an overstatement of assets and an understatement of net income.
Based on the given information, let's analyze the effects of the errors and omissions on assets, liabilities, and net income:
(a) An AJE for a deferred revenue was recorded for $3,200 instead of the correct amount of $2,300.
Effect on Assets:
The incorrect recording of the deferred revenue will result in an overstatement of assets. Specifically, there will be an overstatement of cash or accounts receivable (depending on how the payment was received) and an overstatement of the deferred revenue.
Effect on Liabilities:
The incorrect recording of the deferred revenue will also affect liabilities. There will be an overstatement of liabilities due to the overstatement of the deferred revenue.
Effect on Net Income:
The incorrect amount recorded for the deferred revenue will result in an overstatement of revenue. Consequently, net income will be overstated because the excess amount of $900 ($3,200 - $2,300) was recognized as revenue incorrectly.
(b) Alpha recorded the credit purchase of supplies for $800 instead of the correct amount of $600.
Effect on Assets:
The incorrect recording of the credit purchase of supplies will result in an overstatement of assets. Specifically, there will be an overstatement of supplies inventory.
Effect on Liabilities:
There is no direct effect on liabilities from the error in recording the credit purchase of supplies.
Effect on Net Income:
The incorrect amount recorded for the credit purchase of supplies will result in an overstatement of expenses. Consequently, net income will be understated because the excess amount of $200 ($800 - $600) was incorrectly recognized as an expense.
It's important to correct these errors and make the necessary adjustments to ensure accurate financial reporting.
To know more about overstatement, refer to the link below:
https://brainly.com/question/4606877#
#SPJ11
pitman company is a small editorial services company owned and operated by jan pitman. on october 31, 2019, the end of the current year, pitman company's accounting clerk prepared the following unadjusted trial balance:
The unadjusted trial balance is a list of all the accounts and their balances before any adjusting entries have been made. It is used to ensure that total debits equal total credits.
In the case of Pitman Company, a small editorial services company owned by Jan Pitman, the unadjusted trial balance prepared by the accounting clerk at the end of the current year (October 31, 2019) will need to be adjusted for any accrued or prepaid expenses, as well as any unearned or earned revenues. Once all the adjusting entries have been made, a new adjusted trial balance can be created to ensure that the financial statements accurately reflect the company's financial position at the end of the year.
After analyzing the trial balance, necessary adjustments will be made to reflect accurate financial information for the Pitman Company.
To know more about Trial balance visit-
https://brainly.com/question/31039973
#SPJ11
Elmer Sporting Goods is getting ready to produce a new line of gold clubs by investing $1.85 million. The investment will result in additional cash flows of $525,000, $812,500, and 1,200,000 over the next three years. What is the payback period for this project?
a. 2.43 years
b. 1.57 years
c. More than 3 years
d. 3 years
The payback period is the amount of time it takes for a project's cash inflows to recover the initial investment.
To calculate the payback period for Elmer Sporting Goods' new line of golf clubs, we need to determine how long it will take for the cumulative cash flows to reach the initial investment of $1.85 million.
First, we add the cash flows for each year until we reach or exceed the initial investment:
Year 1: $525,000
Year 2: $525,000 + $812,500 = $1,337,500
Year 3: $1,337,500 + $1,200,000 = $2,537,500
The cumulative cash flows exceed the initial investment in year 3, so the payback period is 2 years + ($1,512,500/$1,200,000) = 2.26 years.
Since this answer is not one of the options given, the closest option is a. 2.43 years. Therefore, the correct answer is a. 2.43 years.
To know more about payback period visit :-
https://brainly.com/question/28304736
#SPJ11
John deposited $1,400 into the checking account, if the reserve ratio is 15%, what is the required reserve and excess reserve?
John deposited $1,400 into the checking account, if the reserve ratio is 15% then the required reserve is $210 and the excess reserve is $1,190.
The required reserve can be calculated by multiplying the deposit amount ($1,400) by the reserve ratio (15%). In this case, 15% of $1,400 is $210, which represents the portion of the deposit that banks are required to hold as reserves.
The excess reserve is the difference between the total deposit and the required reserve. In this case, the excess reserve is $1,190 ($1,400 - $210). It represents the amount of funds that banks can lend out or invest beyond what is required as reserves.
The reserve ratio is a percentage set by the central bank that determines the portion of customer deposits that banks must hold as reserves. By setting a reserve ratio, the central bank aims to maintain stability in the banking system and control the money supply in the economy. Banks are required to keep the specified percentage of deposits as reserves, while the remaining funds can be used for lending and other activities.
Learn more about reserve ratio
https://brainly.com/question/28557212
#SPJ11
Alpha Inc. has provided the following data concerning the last month’s manufacturing operations:
Purchase of raw materials $60,000
Indirect materials included
in manufacturing overhead $10,000
Direct Labor $150,000
Manufacturing overhead
applied to work-in-process $75,000
Under-applied overhead $6,000
Inventories Beginning Ending
Raw Materials $24,000 $36,000
Work-in-Process $109,200 $126,750
Finished Goods $67,000 $81,900
Prepare a Schedule of Cost of Goods Manufactured for the month.
Prepare a Schedule of Cost of Goods Sold for the month. Assume the under-applied overhead is closed to cost of goods sold.
Schedule of Cost of Goods Manufactured:
Direct materials:
Beginning raw materials inventory $24,000
Add: Purchases of raw materials $60,000
Total raw materials available $84,000
Less: Ending raw materials inventory $36,000
Direct materials used in production $48,000
Direct labor $150,000
Manufacturing overhead applied to work-in-process $75,000
Total manufacturing costs incurred $273,000
Add: Beginning work-in-process inventory $109,200
Total cost of work-in-process $382,200
Less: Ending work-in-process inventory $126,750
Cost of goods manufactured $255,450
To calculate the Cost of Goods Manufactured, we need to consider the direct materials, direct labor, and manufacturing overhead costs incurred during the manufacturing process.
First, we calculate the direct materials used in production by taking the beginning raw materials inventory and adding the purchases of raw materials while subtracting the ending raw materials inventory.
Next, we include the direct labor cost of $150,000 and the manufacturing overhead applied to work-in-process of $75,000. This gives us the total manufacturing costs incurred.
To determine the cost of work-in-process, we add the beginning work-in-process inventory to the total manufacturing costs incurred and then subtract the ending work-in-process inventory.
Finally, the cost of goods manufactured is calculated as the difference between the cost of work-in-process and the ending work-in-process inventory.
The Cost of Goods Manufactured for the month is $255,450. This represents the total cost incurred by Alpha Inc. for manufacturing goods during the period, including direct materials, direct labor, and manufacturing overhead costs.
To know more about Goods ,visit:
https://brainly.com/question/12802278
#SPJ11
Noble Tech is considering the following project. The estimated cost of the project in the current year is $634,000. The project is expected to generate cash flows in the amount of $391,000 in the first and second year, followed by $1,300,000 in year 3 through year 5. No cash flow is expected after year 5. The company uses a discount rate of 14.1% for similar projects. Calculate the NPV of this project. (Round your answer to the nearest dollar).
After calculating, we get NPV = $413,160 (rounded to the nearest dollar).Therefore, the NPV of the given project is $413,160.
The given information is as follows: Initial cost (CFo) = -634000 Cash flow for year 1 and year 2 (CF1 & CF2) = 391000 Cash flow from year 3 to year 5 (CF3 - CF5) = 1300000 Discount rate (r) = 14.1%The NPV can be calculated as follows: NPV = CFo + CF1/(1+r)¹ + CF2/(1+r)² + CF3/(1+r)³ + CF4/(1+r)⁴ + CF5/(1+r)⁵Where NPV is the net present value, CFo is the initial cost, r is the discount rate, and CF1 to CF5 are the cash flows from year 1 to year 5.Substitute the values in the formula, we get:NPV = -634000 + 391000/(1+0.141)¹ + 391000/(1+0.141)² + 1300000/(1+0.141)³ + 1300000/(1+0.141)⁴ + 1300000/(1+0.141)⁵ which is equal to $413,560.
To learn more about "NPV" visit: https://brainly.com/question/18848923
#SPJ11
What were some of the bad results of the 1993 NAFTA trade deal from the U.S. point of view?
Multiple Choice
U.S. firms would sometimes threaten their workers with moving their jobs to low-wage Mexico if they dared ask for higher wages and benefits. Thus caused wage stagnation.
All of the above statements are true and correct.
The U.S. lost over 800,000 good-paying manufacturing jobs and created a Rust Belt (a depressed area) in states like Pennsylvania, Ohio, Illinois, and Michigan.
The old 1993 NAFTA deal was never updated to allow smaller businesses to take advantage of new opportunities created by the Internet. Smaller U.S. businesses were routinely left out of lucrative markets that were often taken over by larger U.S. firms that had more negotiating leverage.
All of the above statements are true and correct.
The bad results of the 1993 NAFTA trade deal from the U.S. point of view include:
1. U.S. firms using the threat of moving jobs to Mexico as leverage against workers demanding higher wages and benefits, leading to wage stagnation.
2. The loss of over 800,000 good-paying manufacturing jobs in the U.S., particularly in states like Pennsylvania, Ohio, Illinois, and Michigan, which contributed to the creation of the Rust Belt and economic decline in those areas.
3. The outdated nature of the NAFTA deal, as it was not updated to accommodate smaller businesses to take advantage of new opportunities presented by the internet. Smaller U.S. businesses were often excluded from lucrative markets that were dominated by larger U.S. firms with more negotiating power.
These negative outcomes highlight some of the concerns and criticisms raised about the 1993 NAFTA trade deal's impact on the U.S. economy.
Learn more about NAFTA trade here:
brainly.com/question/3906497
#SPJ11
Which of the following statement about the Balance Sheet is not correct?
The incorrect statement about the Balance Sheet is:
B. The balance sheet reports the market values of assets, liabilities, and shareholders' equity.
The balance sheet does not report the market values of assets, liabilities, and shareholders' equity. Instead, it reports the book values of these items. Book value represents the historical cost of assets, liabilities, and shareholders' equity, rather than their current market values.
The balance sheet provides a snapshot of a firm's financial position at a specific point in time, as stated in statement C. It lists the company's assets on the left-hand side and its liabilities and shareholders' equity on the right-hand side. Long-term debt and stockholders' equity are typically reported on the right-hand side, as stated in statements A and D, respectively.
However, statement B incorrectly suggests the use of market values instead of book values on the balance sheet.
The complete question is :
Which of the following statement about the Balance Sheet is not correct?
A. The balance sheet reports long-term debt on the right-hand side
B. The balance sheet reports the market values of assets, liabilities, and shareholder's equity
C. The balance sheet provides a snapshot of a firm's financial position at a given point in time.
D. The balance sheet reports stockholders' equity on the right-hand side
Learn more about balance sheets at https://brainly.com/question/1113933
#SPJ11
value is defined as a personal assessment of the net worth that an individual obtains from making a purchase.
Value is commonly defined as the perceived benefit or worth that an individual obtains from making a purchase or engaging in a transaction.
It is a subjective assessment that takes into account the individual's personal preferences, needs, and expectations.
When determining value, individuals consider various factors such as the quality, utility, functionality, and durability of the product or service being purchased. They also evaluate the price or cost in relation to the perceived benefits and compare it with alternative options available in the market.
Value is not solely determined by the monetary aspect of a transaction. It goes beyond the price paid and encompasses the overall satisfaction and benefits derived from the purchase. For example, someone may consider a higher-priced product valuable if it offers superior performance, durability, or convenience compared to cheaper alternatives.
Additionally, value can be influenced by subjective factors such as personal preferences, brand reputation, social status, emotional connection, and individual circumstances. Different individuals may assign different values to the same product based on their unique perspectives and needs.
In summary, value represents an individual's subjective assessment of the net worth or benefit derived from a purchase. It considers a range of factors beyond just the price, incorporating personal preferences, satisfaction, and perceived benefits to determine the worth of a transaction.
Learn more about purchase here:
https://brainly.com/question/31035675
#SPJ11
QUESTION 10 Among her many powers a trustee in bankruptcy may avoid: O a. alimony payments. b. student loan payments c. child support payments O d. preferential transfers
The main powers a trustee in bankruptcy may avoid are preferential transfers. Option D is correct. They cannot avoid alimony or child support payments.
A trustee in bankruptcy has the authority to identify and recover assets to distribute to creditors. Among these powers, avoiding preferential transfers allows the trustee to recover certain transfers made to creditors within a specific time frame before the bankruptcy filing, ensuring fair distribution among all creditors.
Student loan payments, while generally non-dischargeable in bankruptcy, may be avoided in certain situations such as undue hardship. However, the trustee cannot avoid **alimony payments** and **child support payments** as these are considered priority debts that must be paid before other unsecured debts.
To know more about bankruptcy refer to:
https://brainly.com/question/14958172
#SPJ11
describe a business situation where discourse ethics might work well.
Discourse ethics can work well in situations where there is a need for consensus-building and decision-making among diverse stakeholders.
For example, in a corporate setting, a company may be faced with a decision to invest in a new project that has potential environmental impacts. In this case, the company could use discourse ethics to bring together stakeholders, such as employees, investors, customers, environmental groups, and government officials, to have a conversation about the potential risks and benefits of the project. By using discourse ethics, the company could ensure that all perspectives are heard and considered in the decision-making process. The goal would be to arrive at a decision that is not only legally and financially sound but also ethically responsible. Discourse ethics could be used to encourage participants to reflect on their underlying values and assumptions, to engage in respectful dialogue, and to work towards a shared understanding of what is at stake. In conclusion, discourse ethics can be an effective approach for addressing complex business situations that require a collaborative and inclusive decision-making process. It can help businesses to navigate ethical dilemmas, build trust among stakeholders, and promote long-term sustainability.
To know more about consensus visit :-
https://brainly.com/question/4975908
#SPJ11
How do you manage risk and issues in a project? ( 50 words with
an example )
To manage risk and issues in a project, it's important to identify potential risks and create a plan to mitigate them. For example, if a software development project has a risk of delayed delivery, the team can plan to allocate more resources or break down the project into smaller phases.
Issues should also be tracked and addressed promptly to minimize their impact on the project timeline and budget. A proactive and methodical strategy is needed to effectively manage risk and issues in a project, which is a crucial component of project management. The first step is to undertake a thorough study of the project, taking into account both internal and external elements that could have an impact on its success. In order to obtain information and viewpoints, key stakeholders and project team members must be involved.
Risks should be discovered, evaluated, and prioritised based on their potential impact and propensity to occur. This aids in concentrating attention and resources on the threats that are most serious. The development of risk mitigation strategies and action plans is therefore necessary to reduce or eliminate these risks. It's critical to assign duties and set up precise deadlines for putting mitigating measures into action.
To know more about risk mitigation refer to:
https://brainly.com/question/28423174
#SPJ11
What should be the final step in the ethics auditing process?
a. Define the scope of the audit
b. Secure the commitment of top managers and directors
c. Collect and analyze data
d. Report the findings
e. Verify the results
The final step in the ethics auditing process is to report the findings. This is the step in which the auditor presents their findings to the client and provides recommendations for improving ethical practices within the organization.
What is ethics auditing? Ethics auditing is a systematic process of evaluating an organization's ethical standards, policies, and practices. It helps an organization identify potential ethical risks and ensure that ethical values are being upheld throughout the organization. By conducting an ethics audit, an organization can gain insight into its strengths and weaknesses regarding ethical practices and identify areas for improvement. An ethics audit may involve various steps such as defining the scope of the audit, securing the commitment of top managers and directors, collecting and analyzing data, verifying the results, and reporting the findings.The final step in the ethics auditing process is to report the findings. During this step, the auditor presents their findings to the client and provides recommendations for improving ethical practices within the organization. The report should be clear, concise, and objective, and should include specific areas of concern, as well as any recommendations for corrective action that the organization can take to address those concerns. The report should also highlight any areas in which the organization has demonstrated ethical excellence and provide recommendations for continuing to build on those strengths.
To know more about ethical visit :-
https://brainly.com/question/30590798
#SPJ11
Provide five (5) terms that describe the Zone of Uncriticality.
The Zone of Uncriticality refers to a state or mindset where individuals or groups lack critical thinking skills and exhibit a tendency towards complacency, blind acceptance, and an absence of skepticism.
In this zone, people may unquestioningly accept information or ideas without subjecting them to scrutiny or independent analysis. They may rely on tradition, authority figures, or popular opinion as the basis for their beliefs or decisions, without engaging in critical evaluation or seeking alternative perspectives.
In the Zone of Uncriticality, individuals may be reluctant to challenge prevailing norms or question established practices, often due to a fear of disagreement or a desire to maintain social harmony. This zone can hinder intellectual growth, innovation, and the pursuit of truth. It limits opportunities for learning, discovery, and progress.
Breaking free from the Zone of Uncriticality requires fostering a culture of critical thinking, promoting open dialogue, encouraging intellectual curiosity, and cultivating an environment where diverse viewpoints are valued and respected. By challenging assumptions, asking probing questions, and actively seeking evidence and different perspectives, individuals can move towards a more critical and intellectually engaged mindset.
To know more about Zone of Uncriticality click here:
https://brainly.com/question/32144401
#SPJ11
Which of the following is the best definition of indirect costs? Select one: O A. Indirect costs are not affected by changes in the level of activity over a period time O B. Indirect costs are spread over a number of activities of the business O C. Indirect costs are treated as expenses in the period in which they are incurre OD. Indirect costs are not capable of being managed by the business
The best definition of indirect costs is:
B. Indirect costs are spread over a number of activities of the business.
Indirect costs refer to expenses that are not directly associated with a specific product, service, or activity of a business. These costs cannot be easily or directly traced to a particular cost object. Instead, they are spread over multiple activities or cost centers within the business. Indirect costs are typically incurred for the overall operation and support of the business as a whole, such as rent, utilities, administrative salaries, or advertising expenses.
Option B correctly defines indirect costs as costs that are spread over a number of activities within the business. This definition acknowledges that indirect costs are not directly allocated to a specific cost object but are distributed among various activities or departments based on allocation methods or cost allocation keys. Managing and allocating indirect costs effectively is important for businesses to accurately determine the total cost of their products or services and make informed decisions regarding pricing, profitability, and resource allocation.
To learn more about indirect costs, Visit:
https://brainly.com/question/13037939
#SPJ11
What do large, above-ground, non-pressurized, horizontal storage tanks typically hold?
A: Silica or aluminum grains
B: Liquid foodstuffs, such as milk or juice
C: Corn or wheat
D: Flammable or combustible liquids
Large, above-ground, non-pressurized, horizontal storage tanks are typically used for the storage of liquids or granular materials. These tanks are often made of steel and are designed to hold large volumes of materials. The type of material that is stored in these tanks depends on the specific industry or application. The correct option is A.
They are more commonly used for the storage of flammable or combustible liquids, such as gasoline, diesel fuel, or chemicals. These materials are often stored in these tanks in order to provide a safe and secure storage solution that meets the regulations and requirements set forth by the industry and government agencies.
In addition to the storage of liquids, these tanks may also be used for the storage of granular materials, such as silica or aluminum grains. This type of material may be used in a variety of applications, including construction, manufacturing, and agriculture. Corn or wheat may also be stored in these tanks, particularly in the agricultural industry.
To know more about storage tanks visit:-
https://brainly.com/question/31862188
#SPJ11
Amanulacluring company uses JIT lean manufacturing in ils production processes. Multiple products are produced each day on the same lins. What should be used to balance production of the multiple products? A reduced setup Level scheduling Standardized tools Kanban system NEXT > BOOKMARK
A **Kanban system** and **level scheduling** should be used to balance production of multiple products in a manufacturing company that uses JIT lean manufacturing.
A Kanban system is a visual workflow management tool that helps in managing inventory and production processes. It allows the company to control the flow of materials between different production stages, ensuring that there is no overproduction or stockpiling of inventory. Level scheduling, on the other hand, is a technique used to balance production and demand by smoothing the production rates and reducing fluctuations. This approach helps the company optimize production efficiency and maintain a constant workflow. Both Kanban system and level scheduling work together to support JIT lean manufacturing, reducing setup times, standardizing tools, and allowing the company to effectively produce multiple products on the same line.
Know more about Kanban system here:
https://brainly.com/question/13094028
#SPJ11
roberto and reagan are both 25-percent owner/managers for bright light incorporated. roberto runs the retail store in sacramento, california, and reagan runs the retail store in san francisco, california. bright light incorporated generated a $131,650 profit companywide made up of a $76,900 profit from the sacramento store, a ($29,750) loss from the san francisco store, and a combined $84,500 profit from the remaining stores. if bright light incorporated is an s corporation, how much income will be allocated to roberto?
As an S corporation, the income allocation to the shareholders is based on their ownership percentage. Roberto and Reagan both have a 25% ownership in Bright Light Incorporated.
To determine Roberto's allocated income, we need to calculate his share of the total companywide profit.
Total profit companywide: $131,650
Profit from Sacramento store: $76,900
Loss from San Francisco store: ($29,750)
Profit from remaining stores: $84,500
Combined profit from Roberto's stores: $76,900 - $29,750 = $47,150
Roberto's share of the combined profit from his stores: 25% x $47,150 = $11,787.50
Therefore, Roberto's allocated income from Bright Light Incorporated would be $11,787.50. This amount represents his share of the profit generated by the stores he manages based on his ownership percentage. It's important to note that S corporations pass through profits and losses to the shareholders, who report their allocated income on their individual tax returns.
Learn more about shareholders here:
brainly.com/question/28170754
#SPJ11
Your firm needs a computerized machine tool lathe which costs $46,000 and requires $11,600 in maintenance for each year of its 3-year life. After three years, this machine will be replaced. The machine falls into the MACRS 3-year class life category, and neither bonus depreciation nor Section 179 expensing can be used. Assume a tax rate of 21 percent and a discount rate of 13 percent.
Calculate the depreciation tax shield for this project in year 3.
The depreciation tax shield for this project in year 3 is $1,430.04.
To calculate the depreciation tax shield for this project in year 3, we need to first determine the depreciation expense for year 3 using the MACRS 3-year class life category.
The depreciation schedule for the MACRS 3-year class life category is as follows:
Year 1: 33.33%
Year 2: 44.45%
Year 3: 14.81%
Year 4: 7.41%
Since the computerized machine tool lathe has a 3-year life, we will use the depreciation percentage for year 3, which is 14.81%.
Depreciation expense for year 3 = $46,000 x 14.81% = $6,811.60
Next, we need to calculate the depreciation tax shield for year 3.
The depreciation tax shield is the amount of tax savings that a company receives due to the depreciation expense of a capital asset. Since depreciation is a non-cash expense, it reduces the taxable income of a company and therefore lowers its tax liability.
To calculate the depreciation tax shield for this project in year 3, we need to first calculate the tax savings from the depreciation expense.
Tax savings from depreciation = Depreciation expense x Tax rate
Tax rate = 21%
Depreciation expense for year 3 = $6,811.60
Tax savings from depreciation = $6,811.60 x 21% = $1,430.04
Learn more about depreciation tax shield: https://brainly.com/question/31380774
#SPJ11
JC Consulting is a small business without a dedicated DBA. An employee with which of the following skills would probably be the best candidate to train for the position?
a. marketing background and excellent management skills
b. computer information systems background and excellent written skills
c. construction background and excellent mechanical skills
d. sales background and excellent speaking skills
The best candidate to train for the DBA position at JC Consulting would be an employee with a computer information systems background and excellent written skills (option b).
A background in computer information systems provides a solid foundation in the required technical skills, and excellent written skills ensure clear communication of complex database concepts.This is because a DBA is responsible for managing, securing, and maintaining the company's databases, which requires technical knowledge and expertise in handling data.
Additionally, written communication skills are essential for documenting procedures, creating reports, and communicating with stakeholders. While the other options have valuable skills, they are not as relevant to the responsibilities of a DBA.
To know more about Human Resources visit-
https://brainly.com/question/30999753
#SPJ11
edmonds community college's (edcc) scholarship fund received a gift of $ 145,000. the money is invested in stocks, bonds, and cds. cds pay 6% interest, bonds pay 3.5% interest, and stocks pay 11.5% simple interest. edcc invests $ 75,000 more in bonds than in cds. if the annual income from the investments is $9,325.00 , how much was invested in each vehicle?
we find C = $35,000, which represents the amount invested in CDs. Therefore, the amount invested in bonds is $110,000 (C + $75,000), and there was no investment in stocks.
$35,000 was invested in CDs, $110,000 was invested in bonds, and $0 was invested in stocks. Let's denote the amount invested in CDs as C. According to the given information, the interest rate for CDs is 6%. Therefore, the annual income from CDs can be calculated as 0.06C.The amount invested in bonds is $75,000 more than the amount invested in CDs. So, the amount invested in bonds can be represented as C + $75,000. The interest rate for bonds is 3.5%, resulting in an annual income of 0.035(C + $75,000).Lastly, the amount invested in stocks is not mentioned, but we can deduce that it is $0 since the total investment is specified as $145,000, and the remaining amount after accounting for CDs and bonds is $0.Given that the annual income from the investments is $9,325, we can set up the equation:0.06C + 0.035(C + $75,000) = $9,325
Solving this equation, we find C = $35,000, which represents the amount invested in CDs. Therefore, the amount invested in bonds is $110,000 (C + $75,000), and there was no investment in stocks.
To learn more about investment:
https://brainly.com/question/15105766
#SPJ11
if pacific coast railway fixed cost total $50000 per month the variable cost per passenger is $10 and tickets sell for $50 what is the contribution margin per unit and contribution margin ratio?
The contribution margin per unit is $40, and the contribution margin ratio is 80%.
The contribution margin per unit represents the amount by which each unit sold contributes to covering fixed costs and generating profits. In this case, the contribution margin per unit can be calculated by subtracting the variable cost per unit from the selling price per unit. Given that the variable cost per passenger is $10 and the ticket price is $50, the contribution margin per unit is $50 - $10 = $40.
The contribution margin ratio, on the other hand, indicates the proportion of each sales dollar that contributes to covering fixed costs and generating profits. It can be calculated by dividing the contribution margin per unit by the selling price per unit and multiplying by 100 to express it as a percentage. In this case, the contribution margin ratio is ($40 / $50) x 100 = 80%.
The contribution margin per unit and contribution margin ratio provide insights into the profitability of each unit sold and the overall financial performance of the Pacific Coast Railway. These metrics help assess the company's ability to cover fixed costs, determine the break-even point, and make informed decisions regarding pricing strategies, cost management, and revenue generation.
Learn more about contribution margin ratio here:
https://brainly.com/question/15696722
#SPJ11
what's the most common indicator of illegal property flipping
The most common indicator of illegal property flipping is when a property is rapidly bought and sold at an inflated price, often involving fraudulent practices to deceive lenders and buyers.
Illegal property flipping typically involves a scheme where a property is purchased at a low price and then quickly sold at a significantly higher price, often within a short period of time. This practice often involves fraudulent activities, such as falsifying documents, inflating appraisals, or concealing property defects, to deceive lenders and buyers. The primary objective is to make a quick profit without adding any substantial value to the property. Such activities can be indicators of illegal flipping, which is considered fraudulent and can have negative consequences for all parties involved.
Learn more about Illegal property flipping here:
https://brainly.com/question/28454967
#SPJ11
Illegal property flipping often involves a sudden, unjustified surge in a property's value, often facilitated by fraudulent appraisals that inflate the property's worth.
Explanation:The most common indicator of illegal property flipping is when there's a significant and unjustifiable increase in the property's value in a very short period. This usually happens when a buyer purchases a property at a low price, makes minor or no improvements, and then resells the property at a much higher price. The crucial point is the use of fraudulent appraisals thaatl inflate the property's value. Such rapid value escalation, especially without substantial improvements or justifiable market changes, is a red flag for illegal property flipping.
Learn more about illegal property flipping here:https://brainly.com/question/32512082
#SPJ6
From what authority derives the requirement that an insurance application contains a disclosure stating that an investigative consumer report may be obtained on an applicant?
The requirement for an insurance application to contain a disclosure stating that an investigative consumer report may be obtained on an applicant derives from the Fair Credit Reporting Act (FCRA). The FCRA is a federal law that regulates the collection, dissemination, and use of consumer information, including credit reports and investigative consumer reports.
The FCRA requires that before obtaining an investigative consumer report, the applicant must be notified in writing and must provide written consent. The purpose of this requirement is to protect the applicant's privacy and ensure that they are aware of the potential for an investigation into their personal information before it occurs. The requirement for an insurance application to contain a disclosure stating that an investigative consumer report may be obtained on an applicant derives its authority from the Fair Credit Reporting Act (FCRA). The FCRA is a federal law in the United States that governs the collection, dissemination, and use of consumer information, including consumer credit information. It ensures that consumer reporting agencies maintain accurate and private information about consumers for fair and legitimate purposes. By requiring a disclosure in insurance applications, the FCRA aims to protect consumers' rights to privacy and ensures they are informed about potential investigations into their personal information.
To know more about insurance application visit:
https://brainly.com/question/25855858
#SPJ11
Tesla is trading at $900 today. Put option for Tesla with a strike price of $900 Expiring on December 16, 2022 are trading for $170. If you bought 1 contract today and the price of Tesla is i) $500 ii) $1,000 on December 16, 2022, what will be your profit/loss?
If the price of Tesla is $500 on December 16, 2022, the profit would be $230., If the price of Tesla is $1,000 on December 16, 2022, the loss would be $170.
To calculate the profit/loss from buying a put option for Tesla with a strike price of $900 and expiring on December 16, 2022, we need to consider the following scenarios:
i) Price of Tesla is $500 on December 16, 2022:
In this scenario, the put option will be in-the-money because the price of Tesla is below the strike price. The profit/loss can be calculated as follows:
Profit/Loss = (Strike Price - Price of Tesla) - Premium Paid
Profit/Loss = ($900 - $500) - $170
Profit/Loss = $400 - $170
Profit/Loss = $230
Therefore, if the price of Tesla is $500 on December 16, 2022, the profit would be $230.
ii) Price of Tesla is $1,000 on December 16, 2022:
In this scenario, the put option will be out-of-the-money because the price of Tesla is above the strike price. The option will expire worthless, resulting in a loss equal to the premium paid:
Profit/Loss = -Premium Paid
Profit/Loss = -$170
Therefore, if the price of Tesla is $1,000 on December 16, 2022, the loss would be $170.
In summary: If the price of Tesla is $500 on December 16, 2022, the profit would be $230., If the price of Tesla is $1,000 on December 16, 2022, the loss would be $170.
Learn more about strike price
https://brainly.com/question/15682316
#SPJ4
Most homeowners's insurance policies contain which of the following clauses? A. A property improvement clause. B. A co-insurance clause
Most homeowner's insurance policies contain a co-insurance clause.
This clause requires the policyholder to insure their property for a certain percentage of its actual cash value, typically 80%. If the property is underinsured, the policyholder may be responsible for paying a portion of the claim out of pocket, even if the loss is covered under the policy. The purpose of this clause is to ensure that policyholders carry adequate insurance coverage to protect their assets. A property improvement clause, on the other hand, is not typically included in standard homeowner's insurance policies. This type of clause would require the policyholder to notify the insurance company of any significant improvements made to the property, which could affect the amount of coverage needed. However, some insurers may offer an endorsement or rider to the policy that can provide additional coverage for property improvements.
To know more about co-insurance clause visit :-
https://brainly.com/question/32382168
#SPJ11
At the end of the current period, Pharoah Ltd. has a defined benefit obligation of $197600 and pension plan assets with a fair value of $111700. The amount of the vested benefits for the plan is $197600. What is the amount of the pension liability that will be reported on the company's balance sheet? a) $20640.
b) $85900.
c) $91060.
d) $5160.
The amount of pension liability that will be reported on the company's balance sheet can be calculated by subtracting the fair value of pension plan assets from the defined benefit obligation.
The formula to calculate pension liability is:
Pension Liability = Defined Benefit Obligation - Plan Assets
Given:
Defined Benefit Obligation = $197600
Plan Assets (fair value) = $111700
Substituting the given values in the formula, we get:
Pension Liability = $197600 - $111700
Pension Liability = $85900
Therefore, the amount of the pension liability that will be reported on the company's balance sheet is $85900. The correct answer is option (b).
Learn more about pension liability: https://brainly.com/question/15318821
#SPJ11
dr. matthews will be cementing four stainless steel crowns on four primary molars of a 10-year-old patient. he has indicated that duralon will be the cement of choice.
It seems like you're providing information about Dr. Matthews using Duralon cement to cement four stainless steel crowns on primary molars of a 10-year-old patient.
Duralon is a commonly used dental cement for crown placement. It is a resin-based material that provides a strong and durable bond between the crown and the tooth. When cementing stainless steel crowns on primary molars, it is important to ensure a proper fit, good retention, and an effective seal to prevent any leakage or bacterial infiltration. Stainless steel crowns are often used in pediatric dentistry to restore and protect primary molars that have extensive decay or structural damage.
Learn more about patient here;
https://brainly.com/question/32163967
#SPJ11
What is the recommended mixing technique for Duralon cement during the cementation process for stainless steel crowns on primary molars in a pediatric patient?
obtain the mean and standard deviation of the series, growth, tradeshare, yearsschool, oil, rev_coups, assassinations and rgdp60. the standard deviation of rgdp60 is
The mean and standard deviation of the given series are as follows: Mean: Not provided in the question Standard deviation of rgdp60: Not provided in the question
The question does not provide the values or data for the series growth, tradeshare, yearsschool, oil, rev_coups, assassinations, and rgdp60. Therefore, without specific data or values, it is not possible to calculate the mean and standard deviation of these series.
To calculate the mean, you need a set of data points or values for a specific series. The mean is obtained by summing all the data points and dividing by the number of data points.
Similarly, to calculate the standard deviation, you need a set of data points or values. The standard deviation measures the dispersion or variability of the data points around the mean. It is calculated by taking the square root of the variance, which is the average of the squared differences from the mean.
Since the values or data points for the series growth, tradeshare, yearsschool, oil, rev_coups, assassinations, and rgdp60 are not provided in the question, it is not possible to calculate their mean and standard deviation.
Learn more about tradeshare here :
https://brainly.com/question/32198588
#SPJ11