Assuming that an average middle-aged man weighing 90 kg (200 lb) contains 15% body fat, we can calculate the amount of energy stored as fat in this man in kilojoules.
The energy yield from fat is 37 kj/g, so we can use this value to calculate the amount of energy stored as fat. First, we need to calculate the total amount of fat in the man's body, which is 0.15 x 90 kg = 13.5 kg. Then, we can multiply this value by the energy yield of fat to get the total energy stored as fat, which is 13.5 kg x 37 kj/g = 499.5 kj. Therefore, the amount of energy stored as fat in this man is approximately 499.5 kj.
An average middle-aged man weighing 90 kg contains 15% body fat, which equates to 13.5 kg (90 kg * 0.15) of fat stored in adipose tissue. Assuming that the energy yield from fat is 37 kJ/g, we can calculate the total energy stored in this man's fat. First, convert the 13.5 kg of fat to grams: 13,500 g (13.5 kg * 1000 g/kg). Then, multiply this by the energy yield per gram of fat: 13,500 g * 37 kJ/g = 499,500 kJ. Therefore, this man has approximately 499,500 kilojoules of energy stored as fat.
To know more about weighing visit:
https://brainly.com/question/14577832
#SPJ11
still considering the t=0k limit, what fraction of the total number ntotal of free electrons in the metal will be at energies above the fermi energy?
In the t=0 K limit, the fraction of the total number of free electrons in a metal that will be at energies above the Fermi energy can be determined using Fermi-Dirac statistics.
The concept of the Fermi-Dirac distribution function. The Fermi-Dirac distribution function, denoted as f(E), gives the probability of an energy state E being occupied by an electron at a given temperature. At absolute zero temperature (t=0 K), the distribution function becomes a step function, f(E) = 0 for E > Ef (energies above the Fermi energy)
f(E) = 1 for E ≤ Ef (energies up to and including the Fermi energy)
The fraction of electrons above the Fermi energy can be calculated by integrating the distribution function for energies above the Fermi energy and dividing it by the total number of free electrons in the metal (ntotal). Fraction above Fermi energy = ∫[Ef to ∞] f(E) dE / ntotal.
Learn more about Fermi energy here
https://brainly.com/question/31147795
#SPJ11
2. in a real-world experiment, the gaseous decomposition of dinitrogen pentoxide into nitrogen dioxide and oxygen has been studied in carbon tetrachloride solvent at a certain temperature. [n2o5] (m) initial rate (m/s) 0.92 9.50 x 10-6 1.23 1.20 x 10-5 1.79 1.93 x 10-5 2.00 2.00 x 10-5 2.21 2.26 x 10-5 (a) write the balanced chemical reaction for this decomposition.
The reaction coefficients ensure that the law of conservation of mass is followed, and the number of atoms for each element remains the same on both sides of the equation.
The balanced chemical reaction for the gaseous decomposition of dinitrogen pentoxide (N2O5) into nitrogen dioxide (NO2) and oxygen (O2) is:
2N2O5(g) → 4NO2(g) + O2(g)
The initial rate of the reaction has been studied in carbon tetrachloride solvent at different concentrations of N2O5. The table provided shows the concentration of N2O5 and the corresponding initial rate of the reaction in units of m and m/s, respectively. The balanced chemical reaction for the gaseous decomposition of dinitrogen pentoxide (N2O5) into nitrogen dioxide (NO2) and oxygen (O2) is as follows:
N2O5(g) → 2NO2(g) + 1/2 O2(g)
In this reaction, one molecule of dinitrogen pentoxide decomposes into two molecules of nitrogen dioxide and half a molecule of oxygen gas. The reaction coefficients ensure that the law of conservation of mass is followed, and the number of atoms for each element remains the same on both sides of the equation.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
What do the sections between the lines on a phase diagramirepresent?
A. The ranges where temperature and pressure are constant in a
substance
OB. The regions in which temperature and pressure change a
substance's phase
OC. The areas in which the kinetic energy of a substance is constant
OD. The conditions in which a substance exists in a certain phase
← PREVIOUS
Answer:
The answer is D. The sections between the lines on a phase diagram represent the conditions in which a substance exists in a certain phase. For example, the area between the solid and liquid lines represents the conditions in which a substance can exist as either a solid or a liquid. The exact conditions under which a substance will change phase depend on the substance itself.
state the number of sets of equivalent hydrogens in each compound and the number of hydrogens in each set. (a) 3-methylpentane (b) 2,2,4-trimethylpentane
The number of sets of equivalent hydrogens in each compound and the number of hydrogens in each set. (a) 3-methylpentane there are two sets of equivalent hydrogens and (b) 2,2,4-trimethylpentane there are three sets of equivalent hydrogens
(a) 3-methylpentane:
In 3-methylpentane, the carbon skeleton consists of five carbon atoms, and there is a methyl group attached to the third carbon atom. To determine the number of sets of equivalent hydrogens, we need to consider the different types of hydrogen atoms present. Carbon atoms at the ends of the chain have three hydrogens each, which are equivalent to each other. Carbon atoms in the middle of the chain have two hydrogens each, which are also equivalent to each other. The methyl group attached to the third carbon has three hydrogens.
Therefore, in 3-methylpentane:
There are two sets of equivalent hydrogens: one set on the terminal carbon atoms and one set on the middle carbon atoms. Each set contains three hydrogens.
(b) 2,2,4-trimethylpentane:
In 2,2,4-trimethylpentane, the carbon skeleton also consists of five carbon atoms, but it has three methyl groups attached at different positions. Let's analyze the different types of hydrogen atoms present. Carbon atoms at the ends of the chain have three hydrogens each, which are equivalent to each other. The carbon atom in the middle of the chain has two hydrogens. The methyl groups attached at the second and fourth carbons have three hydrogens each. Therefore, in 2,2,4-trimethylpentane: There are three sets of equivalent hydrogens: one set on the terminal carbon atoms, one set on the middle carbon atom, and one set on the methyl groups. Each set contains three hydrogens, except for the middle carbon atom, which has two hydrogens.
Learn more about equivalent hydrogens here:
https://brainly.com/question/30894001
#SPJ11
A risk assessment for a reaction should include the hazards associated with the: a. chemical reagents used. b. chemical products and by-products. c. procedures involved. d. All of the above.
A risk assessment for a reaction should include the hazards associated with the chemical reagents used, the chemical products and by-products formed, and the procedures involved. Therefore, the correct answer is d. All of the above.
A comprehensive risk assessment considers all potential hazards associated with a chemical reaction. This includes evaluating the hazards of the chemical reagents used, the chemical products and by-products formed during the reaction, and the procedures involved in conducting the reaction.
The chemical reagents used in a reaction may have inherent hazards such as toxicity, flammability, or reactivity. It is important to assess and understand these hazards to ensure proper handling and safety measures are in place.
The chemical products and by-products formed during the reaction can also pose hazards. They may have different chemical properties or be more toxic, corrosive, or reactive than the starting materials. Understanding and evaluating these hazards is crucial for the safe handling, storage, and disposal of the reaction products.
Learn more about chemical reagents here:
https://brainly.com/question/5601219
#SPJ11
what is the total number of valence electrons in an ammonium ion, nh4 ?
The ammonium ion has 9 valence electrons in total. Valence electrons are important because they determine the reactivity of an atom or ion in chemical reactions.
The ammonium ion, [tex]NH_4^+[/tex], is a positively charged polyatomic ion that is formed when ammonia ([tex]NH_3[/tex]) gains a hydrogen ion (H+). To determine the total number of valence electrons in the ammonium ion, we need to consider the valence electrons of each atom that makes up the ion. Nitrogen (N) has 5 valence electrons, while each hydrogen (H) atom has 1 valence electron. Therefore,
5 (valence electrons of N) + 4 x 1 (valence electrons of 4 H atoms) = 9 valence electrons.
The valence electrons of the ammonium ion play a crucial role in its interactions with other molecules or ions.
To learn more about valence electrons click here https://brainly.com/question/31264554
#SPJ11
determine the volume of 0.142 m naoh that is required to reach the stoichiometric point in the titration of 36 mL of 0.18 M C6H5COOH(aq). The Ka of benzoic acid is 6.5×10−5.
To determine the volume of 0.142 M NaOH required to reach the stoichiometric point in the titration of 36 mL of 0.18 M benzoic acid, we use the equation: moles of acid = moles of base. Since benzoic acid and NaOH react in a 1:1 ratio, we can write: (C6H5COOH) × (volume of C6H5COOH) = (NaOH) × (volume of NaOH).
Using the given concentrations and volume, we have: (0.18 mol/L) × (0.036 L) = (0.142 mol/L) × (volume of NaOH). Solving for the volume of NaOH, we get approximately 0.0455 L or 45.5 mL. Therefore, 45.5 mL of 0.142 M NaOH is required to reach the stoichiometric point in this titration.
In this titration, we are trying to determine the volume of 0.142 M NaOH required to reach the stoichiometric point with 36 mL of 0.18 M C6H5COOH (benzoic acid).
To start, we need to determine the number of moles of benzoic acid in 36 mL of 0.18 M solution. Using the formula M = moles/volume, we can calculate this to be 0.00648 moles.
Since NaOH and benzoic acid react in a 1:1 ratio, we know that 0.00648 moles of NaOH will be required to reach the stoichiometric point.
Now, we can use the formula V = n/M to calculate the volume of NaOH needed. Plugging in the values, we get:
V = 0.00648 moles / 0.142 M = 0.0456 L or 45.6 mL.
Therefore, 45.6 mL of 0.142 M NaOH is required to reach the stoichiometric point in the titration of 36 mL of 0.18 M benzoic acid.
To know more about stoichiometric point visit:
https://brainly.com/question/11130137
#SPJ11
Which statement must be TRUE for an electron transfer reaction to be energetically spontaneous? a. There must be a concurrent increase in entropy. b. The two groups involved in the electron transfer must be in direct contact. c. The change in reduction potential (AE.) must be negative. d. The change in reduction potential (AE) must be positive.
The correct statement for an electron transfer reaction to being energetically spontaneous is option c, which states that the change in reduction potential (AE) must be negative.
The reduction potential is a measure of the tendency of a chemical species to acquire electrons and is represented by the symbol E. The larger the reduction potential, the greater the tendency to acquire electrons. When an electron transfer occurs from a species with a higher reduction potential to one with a lower reduction potential, energy is released. This energy is available to do work and makes the reaction energetically spontaneous. Option a, stating that there must be a concurrent increase in entropy, is not necessarily true for all electron transfer reactions. While it is true that some electron transfer reactions may result in an increase in entropy, this is not a requirement for the reaction to be energetically spontaneous. Option b, stating that the two groups involved in the electron transfer must be in direct contact, is also incorrect as electron transfer can occur between molecules that are not in direct contacts, such as through a redox mediator.
To know more about electron transfer
https://brainly.com/question/18214360
#SPJ11
suppose that placing 0.3 inch of lead in front of a gamma source reduces the count rate from 996 cps to 613 cps. what is -1m in g / cm2 ? the density of lead is 11.4 g / cm3 .
To find -1m in g/cm2, we need to use the equation:
-1m = (0.693 / μ) x (ρ x t)
where:
- 0.693 is the natural logarithm of 2
- μ is the linear attenuation coefficient of lead at the gamma energy of the source
- ρ is the density of lead
- t is the thickness of the lead shielding in cm
First, we need to find the linear attenuation coefficient (μ) of lead at the gamma energy of the source. We can use a table or a graph to estimate this value. Let's assume that μ for lead at the gamma energy of the source is 1.2 cm-1.
Next, we can calculate the thickness of the lead shielding (t) in cm. We know that placing 0.3 inch of lead (0.762 cm) reduces the count rate from 996 cps to 613 cps. So, the thickness of the lead shielding is:
t = 0.762 cm
Finally, we can calculate -1m in g/cm2 using the equation above:
-1m = (0.693 / 1.2) x (11.4 g/cm3 x 0.762 cm)
-1m = 3.22 g/cm2 (word count 100)
To answer your question, let's first determine the mass attenuation coefficient, μ. The formula for this is:
I = I₀ * e^(-μx)
Where I is the final count rate (613 cps), I₀ is the initial count rate (996 cps), x is the thickness of lead (0.3 inch), and e is the base of the natural logarithm.
613 = 996 * e^(-μ*0.3)
Now, solve for μ:
μ ≈ 1.497 cm^(-1)
Next, convert -1 m to cm:
-1 m = -100 cm
Lastly, calculate the mass attenuation in g/cm² using the density of lead (11.4 g/cm³):
mass attenuation = μ * (-100 cm) * (11.4 g/cm³) ≈ -1708.58 g/cm².
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
Calculate the change in enthalpy of the reaction below when aqueous carbonic acid reacts with aqueous potassium hydroxide, given the following heats of formation: Carbonic acid (aq) AH'= -699.7 kJ/mol; Potassium hydroxide (aq) AH"=-115.3 kJ/mol, Potassium carbonate AH = -282.3 kJ/mol, and water AHY = -285.8 kJ/mol _H2CO3(aq) + _KOH(aq) — _K.CO3(aq) + _H2O(1)
To calculate the change in enthalpy (ΔH) for the reaction, you can use the following formula:
ΔH = Σ[ΔH(products)] - Σ[ΔH(reactants)]
For the reaction: H2CO3(aq) + KOH(aq) → K2CO3(aq) + H2O(l)ΔH(products) = ΔH(K2CO3) + ΔH(H2O) = -282.3 kJ/mol + (-285.8 kJ/mol) = -568.1 kJ/mol
ΔH(reactants) = ΔH(H2CO3) + ΔH(KOH) = -699.7 kJ/mol + (-115.3 kJ/mol) = -815 kJ/mol
ΔH = (-568.1 kJ/mol) - (-815 kJ/mol) = 246.9 kJ/mol
The change in enthalpy (ΔH) for the given reaction is 246.9 kJ/mol.To calculate the change in enthalpy of the reaction, we need to use the heats of formation of the reactants and products. The balanced chemical equation shows that 1 mole of carbonic acid reacts with 1 mole of potassium hydroxide to form 1 mole of potassium carbonate and 1 mole of water.The enthalpy change of the reaction can be calculated using the following formula:
ΔH = ΣnΔHf(products) - ΣnΔHf(reactants)
Where ΔH is the change in enthalpy, Σn is the sum of the moles of each compound, and ΔHf is the heat of formation.
Substituting the values given, we get:
ΔH = (1 × -282.3 kJ/mol) + (1 × -285.8 kJ/mol) - (1 × -699.7 kJ/mol) - (1 × -115.3 kJ/mol)
ΔH = -567.8 kJ/mol + 814.4 kJ/mol
ΔH = 246.6 kJ/mol
The change in enthalpy of the reaction is 246.6 kJ/mol.
To know more about enthalpy visit:
https://brainly.com/question/29145818
#SPJ11
To prepare a sample in a capillary tube for a melting point determination, gently tap the tube into the sample with the Choose... end of the tube down. Continue tapping until the sample Choose... Then, with the Choose... - end of the tube down, tap the sample down slowly or Choose... to move the sample down faster. Finally, make sure that you can see Choose... in the magnifier when placed in the melting point apparatus before turning on the heat.
To prepare a sample in a capillary tube for a melting point determination, gently tap the tube into the sample with the closed-end of the tube down.
Continue tapping until the sample is compacted. Then, with the open-end of the tube down, tap the sample down slowly or use a plunger to move the sample down faster. Finally, make sure that you can see the sample clearly in the magnifier when placed in the melting point apparatus before turning on the heat.
Preparing a sample in a capillary tube for a melting point determination requires careful handling to ensure accurate results. Here's a step-by-step explanation of the process:
Take a clean, dry capillary tube and hold it with one end closed (usually called the closed-end) and the other end open (called the open-end).
Gently tap the closed-end of the tube onto the solid sample, ensuring that the open-end is facing upwards. The tapping helps to transfer the sample into the tube.
Continue tapping the tube into the sample until the sample is tightly packed inside the tube. This ensures uniformity and consistency during the melting point determination.
Once the sample is compacted, reverse the position of the tube so that the open-end is facing downwards.
Tap the tube down slowly or use a plunger to move the sample further down the tube. This helps in adjusting the position of the sample inside the capillary tube.
After moving the sample down, check through a magnifier to ensure that the sample is visible and properly positioned within the tube. Adjust if necessary to obtain a clear view.
Proper sample preparation is crucial for accurate melting point determination. By following the steps outlined above, you can ensure that the sample is securely packed within the capillary tube and positioned correctly for observation. This allows for precise temperature measurements during the melting point determination process. Taking care to handle the capillary tube gently and tapping it at the appropriate ends helps in achieving reliable results. Remember to exercise caution when using a magnifier and ensure that you can clearly observe the sample before initiating the heating process.
To know more about capillary tube ,visit:
https://brainly.com/question/11470892
#SPJ11
suppose a student repeats the experiment, but adds 25 g of sodium bicarbonate to the 6 m hcl solution instead of adding 1 m naoh. what observations indicate that a reaction took place?
Here are the observations that indicate that a reaction took place when 25 g of sodium bicarbonate is added to the 6 M HCl solution:Evolution of carbon dioxide gas,increase in temperature,precipitation of a solid product.
Sodium bicarbonate is a base, and hydrochloric acid is an acid. When these two substances react, they produce carbon dioxide gas. The carbon dioxide gas will bubble out of the solution, creating a fizzing or effervescence.
The reaction between sodium bicarbonate and hydrochloric acid is exothermic, meaning that it releases heat. The temperature of the solution will increase as a result of the reaction.
The color of the solution may change as a result of the reaction. For example, the solution may turn cloudy or milky.
A solid product may precipitate out of the solution as a result of the reaction. For example, the product of the reaction between sodium bicarbonate and hydrochloric acid is sodium chloride, which is a white solid.
Thus,if the student does not observe any of these observations, then it is likely that no reaction took place.
Learn more about temperature,here:
https://brainly.com/question/7510619
#SPJ12
What is the molality of a solution containing 11.5 g of ethylene glycol dissolved in 145 g of water. Note: ethylene glycol = C2H602 a. 0.0342 m b. 0.222 m c. 1.28 m d. 1.85 m
The molality of a solution containing 11.5 g of ethylene glycol dissolved in 145 g of water is 1.72 m
To calculate the molality of a solution, we use the formula:
Molality (m) = moles of solute / mass of solvent in kg
First, we need to find the moles of ethylene glycol . The molar mass of ethylene glycol is 46.07 g/mol.
Given that the mass of ethylene glycol is 11.5 g, we can calculate the moles as follows:
Moles of[tex]C_2H_6O_2[/tex] = mass / molar mass = 11.5 g / 46.07 g/mol ≈ 0.2493 mol
Next, we need to convert the mass of water to kg. The mass of water is 145 g, which is equal to 0.145 kg.
Now, we can calculate the molality:
Molality (m) = moles of solute / mass of solvent in kg = 0.2493 mol / 0.145 kg ≈ 1.72 m
Therefore, the molality of the solution is approximately 1.72 m. The correct answer among the options provided is not listed. None of the options match the calculated molality of 1.72 m.
Learn more about molality here:
https://brainly.com/question/30640726
#SPJ11
Why are HFCs inappropriate for long-term replacement of CFCs? a. They are flammable b. They are very toxic c. They absorb infrared radiation
HFCs (Hydrofluorocarbons) are inappropriate for long-term replacement of CFCs (Chlorofluorocarbons) due to their ability to absorb infrared radiation.
HFCs are not flammable and they are not very toxic, which makes them initially attractive as alternatives to CFCs. However, their significant drawback lies in their ability to absorb infrared radiation, which contributes to global warming. HFCs have a high global warming potential (GWP) compared to CFCs. When released into the atmosphere, HFCs can trap heat and contribute to the greenhouse effect, leading to climate change. This characteristic makes them unsuitable for long-term use as replacements for CFCs.
CFCs, although detrimental to the ozone layer, have a low GWP and do not significantly contribute to global warming. The goal of finding alternatives to CFCs is to mitigate both ozone depletion and climate change. As a result, the focus has shifted towards finding alternative substances that have low ozone depletion potential (ODP) as well as low GWP. Substances like hydrofluoroolefins (HFOs) are being explored as potential replacements for CFCs, as they have low ODP and low GWP, making them more suitable for long-term use.
To learn more about Hydrofluorocarbons refer:
https://brainly.com/question/14528690
#SPJ11
T/F Ironically customer complaints can sometimes result in improved customer service
True. In many cases, customer complaints can actually result in improved customer service.
This is because complaints can bring attention to areas where a business may be falling short in meeting the needs or expectations of their customers. By addressing these complaints and making changes to improve the customer experience, a business can show that they value their customers and are committed to providing the best possible service. Additionally, addressing complaints can also help to prevent future issues and improve overall customer satisfaction. So while complaints may initially seem like a negative aspect of customer service, they can ultimately lead to positive changes and improvements.
To know more about customer visit:
https://brainly.com/question/31192428
#SPJ11
choose the molecule or compound that exhibits dispersion forces as its strongest intermolecular force a. nh3 b. ch4 c. s2 d. cf4
The molecule that exhibits dispersion forces as its strongest intermolecular force among the given options is CH4 (methane). Dispersion forces, also known as London dispersion forces or van der Waals forces, are the weakest intermolecular forces. In CH4, the molecule is nonpolar, and there are no stronger forces like hydrogen bonding or dipole-dipole interactions present. As a result, dispersion forces are the strongest intermolecular forces in CH4.
Out of the given options, the molecule that exhibits dispersion forces as its strongest intermolecular force is CH4. Dispersion forces are the weakest type of intermolecular forces that occur due to temporary shifts in electron density in a molecule. As CH4 is a nonpolar molecule, it has no permanent dipole moment. Hence, its intermolecular forces are dominated by dispersion forces. NH3, S2, and CF4 have other intermolecular forces in addition to dispersion forces, such as hydrogen bonding, dipole-dipole interactions, and induced dipole-dipole interactions, respectively. Therefore, CH4 with its structure is an example of a molecule with dispersion forces as its strongest intermolecular force.
To know more about intermolecular force visit:
https://brainly.com/question/31797315
#SPJ11
the volume of a sample of hydrogen gas at 0.997 atm is 5.00l. what will be the new volume if the pressure is decreased to 0.977 atm?
The new volume of the hydrogen gas sample, when the pressure is decreased from 0.997 atm to 0.977 atm, can be calculated using Boyle's law. The new volume will be approximately 5.10 L.
Boyle's law states that at a constant temperature, the volume of a gas is inversely proportional to its pressure. Mathematically, this relationship can be expressed as:
[tex]\[ P_1 \cdot V_1 = P_2 \cdot V_2 \][/tex]
where [tex]\( P_1 \)[/tex] and [tex]\( V_1 \)[/tex] are the initial pressure and volume, and [tex]\( P_2 \)[/tex] and [tex]\( V_2 \)[/tex] are the final pressure and volume.
Given that the initial pressure [tex](\( P_1 \))[/tex] is 0.997 atm and the initial volume [tex](\( V_1 \))[/tex] is 5.00 L, and the final pressure [tex](\( P_2 \))[/tex] is 0.977 atm, we can solve for the final volume [tex](\( V_2 \))[/tex]:
[tex]\[ P_1 \cdot V_1 = P_2 \cdot V_2 \][/tex]
[tex]\[ 0.997 \, \text{atm} \cdot 5.00 \, \text{L} = 0.977 \, \text{atm} \cdot V_2 \][/tex]
Solving for [tex]\( V_2 \)[/tex]:
[tex]\[ V_2 = \frac{{0.997 \, \text{atm} \cdot 5.00 \, \text{L}}}{{0.977 \, \text{atm}}} \approx 5.10 \, \text{L} \][/tex]
Therefore, the new volume of the hydrogen gas sample, when the pressure is decreased to 0.977 atm, will be approximately 5.10 L.
To learn more about Boyle's law refer:
https://brainly.com/question/1696010
#SPJ11
the least polar of the following molecules is group of answer choices a) ch2cl2 b) ccl4 c) ch3cl d) cocl2 e) ncl3
The least polar molecule among the options provided is (e) NCl3, nitrogen trichloride.
Polarity in molecules is determined by the electronegativity difference between atoms and the molecular geometry. In this case, NCl3 has the least polar nature among the given options because it has a trigonal pyramidal molecular geometry, where the chlorine atoms are positioned symmetrically around the central nitrogen atom. The nitrogen-chlorine bonds are polar due to the electronegativity difference, but the symmetry of the molecule cancels out the overall polarity.
On the other hand, options (a) CH2Cl2, (b) CCl4, (c) CH3Cl, and (d) COCl2 are more polar molecules. They possess different molecular geometries that result in a net molecular dipole moment, making them more polar than NCl3.
Know more about least polar molecule here:
https://brainly.com/question/22209917
#SPJ11
explain in terms of le chatelier principle why increasing the concentration of h increases the concentration of latic acid
Le Chatelier's principle states that when a system at equilibrium is subjected to a stress, it will shift to counteract that stress and re-establish equilibrium.
In the case of the reaction between lactate and hydrogen ions, increasing the concentration of H+ (hydrogen ions) will create a stress on the equilibrium system. According to Le Chatelier's principle, the system will shift towards the side of the reaction that counteracts this stress. This means that more lactate will react with H+ to form lactic acid, increasing the concentration of lactic acid. Therefore, increasing the concentration of H+ will cause the reaction to shift to the right, resulting in an increase in the concentration of lactic acid.
To know more about Le Chatelier's principle visit:
https://brainly.com/question/29009512
#SPJ11
To control her blood pressure, Jill's grandmother takes one half of a pill every other day. Which of the following represents about a one year supply? O 360 pills 180 pills 60 pills O 30 pills O 90 pills
180 pills would represent about a one-year supply for Jill's grandmother.
To determine the one-year supply of pills, we need to calculate the total number of pills Jill's grandmother would take in a year.
Jill's grandmother takes one half of a pill every other day. In one year, there are 365 days. Since she takes one pill every other day, she would take a total of 365/2 = 182.5 pills in a year.
Since we cannot have half a pill, we need to round the number to the nearest whole number. In this case, Jill's grandmother would need approximately 183 pills for a one-year supply.
Among the given options, the closest number to 183 is 180 pills. Therefore, 180 pills would represent about a one-year supply for Jill's grandmother.
Learn more about pills here:
https://brainly.com/question/32176802
#SPJ11
How many moles of carbon monoxide react with 1 mole of oxygen gas according to the balanced chemical equation?
2 CO + O2(g) = 2 CO2
a. 1 mol
b. 2 mol
c. 3 mol
d. 4 mol
e. none of the above
The balanced chemical equation is: 2 CO + O2(g) = 2 CO2. According to this equation, 2 moles of carbon monoxide (CO) react with 1 mole of oxygen gas (O2) to produce 2 moles of carbon dioxide (CO2). Therefore, the correct answer is:b. 2 mol
According to the balanced chemical equation, 2 moles of carbon monoxide (2 CO) react with 1 mole of oxygen gas (O2) to form 2 moles of carbon dioxide (2 CO2). Therefore, the answer is option b, which is 2 mol. This means that for every 1 mole of oxygen gas, we need 2 moles of carbon monoxide to react completely. It is important to note that in any chemical reaction, the balanced equation tells us the stoichiometry or the ratio of the number of moles of reactants and products involved. This information is useful in determining the amount of reactants needed or the amount of products formed in a reaction.
To know more about Moles visit:
https://brainly.com/question/31906285
#SPJ11
in the electrolysis of water, what happens at the anode? select the correct answer below: hydrogen is oxidized hydrogen is reduced oxygen is oxidized oxygen is reduced
At the anode during the electrolysis of water, oxygen is oxidized.
During the electrolysis of water, water molecules are dissociated into hydrogen ions and hydroxide ions due to the flow of electric current. At the anode, which is the positive electrode, oxidation occurs. Oxidation involves the loss of electrons. In this case, the hydroxide ions present at the anode are oxidized to form oxygen gas.
The reaction that takes place at the anode during the electrolysis of water is as follows:
[tex]4OH- - > 2H_2O + O_2 + 4e-[/tex]
Here, the hydroxide ions lose electrons and are converted into oxygen gas. These electrons flow through the external circuit to the cathode, where reduction takes place. At the cathode, hydrogen ions are reduced to form hydrogen gas .
Therefore, during the electrolysis of water, at the anode, oxygen is oxidized, while at the cathode, hydrogen is reduced.
Learn more about electrolysis here:
https://brainly.com/question/12994141
#SPJ11
which element has the following ground state electron configuration? 1s22s22p63s23p5 select the correct answer below: cl f s ar
Answer: Cl
Explanation:
The element with the ground state electron configuration of 1s
[tex]1s^2 2s^2 2p^6 3s^2 3p^5[/tex] is chlorine (Cl).
The electron configuration [tex]1s^2 2s^2 2p^6 3s^2 3p^5[/tex] represents the arrangement of electrons in the atomic orbitals of an element. Breaking it down:
- 1s2 represents two electrons in the 1s orbital.
- 2s2 represents two electrons in the 2s orbital.
- 2p6 represents six electrons in the 2p orbital.
- 3s2 represents two electrons in the 3s orbital.
- 3p5 represents five electrons in the 3p orbital.
By identifying the element based on its electron configuration, we can determine that the element in question is chlorine (Cl). Chlorine has an atomic number of 17, indicating that it has 17 electrons. The given electron configuration matches that of chlorine, where the outermost electron is in the 3p orbital, specifically in the 3p5 subshell.
Learn more about electron configuration here:
https://brainly.com/question/29157546
#SPJ11
air with a density of 10 g/m^3 is 100% saturated at 12 c. at what temperature will it reach its dew point?
The dew point is the temperature at which air becomes saturated and water vapor starts to condense.
Assuming a constant pressure, the dew point temperature of the air can be found using the formula:
dew point temperature = (237.7 * ln(RH/100) + (17.27 * T)/(237.7 + T))
where RH is the relative humidity and T is the temperature in degrees Celsius. Since the air is 100% saturated, RH = 100. Plugging in the given values, we get:
dew point temperature = (237.7 * ln(1) + (17.27 * 12)/(237.7 + 12))
Solving this equation, we get the dew point temperature to be approximately 12°C. This means that at a temperature of 12°C, the air will become fully saturated and reach its dew point, causing water vapor to condense into liquid droplets.
The dew point is the temperature at which air becomes saturated and water vapor starts to condense. To find the dew point temperature, we consider that the air's density is 10 g/m^3 and it's 100% saturated at 12°C. In this case, we need to find the temperature at which the air's relative humidity reaches 100%. Using the Clausius-Clapeyron equation or psychrometric charts, one can determine the dew point temperature based on the given conditions. Unfortunately, without knowing the air's actual water vapor content, we cannot provide an exact dew point temperature.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
a ketohexose is reduced with nabh4 in ch3oh to form a mixture of d-galactitol and d-talitol. what is the structure of the ketohexose? draw your answer as a fischer projection.
The starting ketohexose must be a hexose that contains both galactose and talose as possible constituents. This indicates that the ketohexose is most likely D-tagatose, which has a ketone functional group and six carbon atoms. The Fischer projection of D-tagatose would show the arrangement of its six carbon atoms in a straight chain with the ketone group on the second carbon atom.
To determine the structure of the ketohexose that yields a mixture of d-galactitol and d-talitol when reduced with NaBH4 in CH3OH, we need to analyze the products. Both d-galactitol and d-talitol are sugar alcohols derived from hexoses. D-galactitol is derived from D-galactose, while D-talitol is derived from D-talose. Therefore, When a ketohexose is reduced with NaBH4 in CH3OH to form a mixture of D-galactitol and D-talitol, the ketohexose in question is D-tagatose. In its Fischer projection, the structure of D-tagatose is as follows:
CHO
|
C(OH)H
|
C(OH)H
|
C(OH)H
|
C(OH)H
|
CH2OH
To convert it into the Fischer projection of D-galactitol, you need to change the top carbonyl (C=O) group to an alcohol (C-OH) group. Likewise, you can obtain D-talitol's Fischer projection by changing the C=O group and inverting the 2nd hydroxyl group's orientation.
To know more about ketohexose visit:
https://brainly.com/question/31114760
#SPJ11
why could you see the agno3 diffusing out from the center well, but not the nacl diffusing from the peripheral wells?
The reason why you could see the AgNO3 diffusing out from the center well, but not the NaCl diffusing from the peripheral wells is due to a difference in their respective diffusion rates.
AgNO3 has a higher diffusion rate compared to NaCl due to the differences in their molecular weights and structure. Additionally, the concentration gradient of AgNO3 was higher in the center well compared to the peripheral wells, which led to a more visible diffusion. On the other hand, NaCl had a lower concentration gradient and a slower diffusion rate, resulting in a less visible diffusion. Thus, the difference in diffusion rates and concentration gradients accounts for the varying visibility of the two substances.
To know more about AgNO3 visit:
https://brainly.com/question/22093390
#SPJ11
Two angles lie along a straight line. If m∠A is five times the sum of m∠B plus 7. 2°, what is m∠B?
A horizontal line has a ray that extends up and right. The angle formed on the left of the ray is labelled A and the angle formed on the right of the ray is labelled B
The measure of m∠B when two angles lie along a straight line and m∠A is five times the sum of m∠B plus 7.2° is 28.8 - 0.2x°.
Let's say the measure of angle A is x°. According to the problem, we know that:∠A and ∠B are on a straight line
i.e ∠A + ∠B = 180°
Also, m∠A is five times the sum of m∠B plus 7.2°m∠A = 5(m∠B + 7.2°)
Substitute the value of m∠A from the above equation into the first equation:
∠A + ∠B = 180°
x° + m∠B = 180°
Now, substituting the value of m∠A in the second equation:
x° + 5(m∠B + 7.2°) = 180°
x° + 5m∠B + 36 = 180°
x° + 5m∠B = 180° - 36x° + 5
m∠B = 144°/5 - x°/5
m∠B = 28.8 - 0.2x°
Therefore, the measure of angle B is 28.8 - 0.2x°.
Learn more about measure of angle: https://brainly.com/question/31186705
#SPJ11
2. 5 mol of sodium chloride is decomposed into elements sodium and chlorine by means of electrical enegery. How much chlorine gas in grams is obtained from the process?
The decomposition of 2.5 mol of sodium chloride yields approximately 88.625 grams of chlorine gas.
From the decomposition of 2.5 mol of sodium chloride, the amount of chlorine gas obtained can be calculated by using the molar mass of chlorine.
The molar mass of sodium chloride (NaCl) is 58.44 g/mol, which means that for every 1 mol of sodium chloride, we get 1 mol of chlorine gas. Therefore, from 2.5 mol of sodium chloride, we obtain 2.5 mol of chlorine gas. To convert moles to grams, we multiply the number of moles by the molar mass of chlorine (35.45 g/mol):
Mass of chlorine gas = 2.5 mol * 35.45 g/mol = 88.625 g
Thus, approximately 88.625 grams of chlorine gas is obtained from the decomposition of 2.5 mol of sodium chloride.
You can learn more about sodium chloride at
https://brainly.com/question/24878544
#SPJ11
Which of the following describes the net reaction that occurs
in the cell,
Cd Cd?*(1 MI Cu?* (1 M) Cu?
a. Cu + Cd?+ - Cu?+ + Cd
b. Cu + Cd - Cu?+ + Ca?+ c. Cu?* + Cd?* - Cu + Cd d. Cu?* + Cd - Cu + Cd?*
e. 2Cu+ Cd?+ > 2Cu* + Cd
The correct answer is e. The net reaction that occurs in the cell involves the oxidation of copper (Cu) to form copper ions (Cu+), and the reduction of cadmium ions (Cd2+) to form cadmium metal (Cd). This is represented by the equation: 2Cu+ Cd2+ > 2Cu* + Cd.
In this reaction, Cu+ is the oxidizing agent, as it gains electrons and becomes reduced, while Cd2+ is the reducing agent, as it loses electrons and becomes oxidized. This reaction can be used to generate electrical energy in a cell, such as a battery. Overall, the net reaction involves the transfer of electrons from one species to another, resulting in the formation of a metal and an ion.
To know more about Reaction visit:
https://brainly.com/question/30344509
#SPJ11
Complete the equation below for the neutralization reaction by writing the formula ofeach product
KOH(aq) + HCl(aq)->______ + ______
KOH (potassium hydroxide) reacts with HCl (hydrochloric acid) to produce a salt and water. The formula of each product can be determined by combining the respective positive and negative ions.
KOH(aq) + HCl(aq) -> KCl(aq) + H2O(l)
In this balanced equation, KCl (potassium chloride) is the salt, and H2O (water) is the other product formed during the neutralization reaction.KOH(aq) + HCl(aq) -> KCl(aq) + H2O(l)
In this neutralization reaction, potassium hydroxide (KOH) reacts with hydrochloric acid (HCl) to produce potassium chloride (KCl) and water (H2O). The balanced equation for this reaction is KOH(aq) + HCl(aq) -> KCl(aq) + H2O(l). In this equation, the formula of each product is written as KCl(aq) and H2O(l), which represent potassium chloride in aqueous solution and water in its liquid state, respectively. This is an example of an acid-base reaction, where the acid (HCl) and the base (KOH) react to form a salt (KCl) and water through a neutralization reaction.
To know more about HCl visit:
https://brainly.com/question/30233723
#SPJ11