The mass percent of carbon in decane, C{10}H{22}, is 12.11%.
This can be determined by using the atomic mass of each element. Carbon has an atomic mass of 12.01 and Hydrogen has an atomic mass of 1.008.
When calculating the mass percent, you must first determine the total molar mass of the compound.
The total molar mass of decane is calculated by multiplying the atomic mass of each element by the number of atoms of that element in the molecule.
For example, the total molar mass of decane is calculated by multiplying 12.01 (atomic mass of carbon) by 10 (the number of carbon atoms) and 1.008 (atomic mass of hydrogen) by 22 (the number of hydrogen atoms).
This yields a total molar mass of 142.256.
The mass percent of carbon can be determined by dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.
This is calculated by dividing 12.01 (atomic mass of carbon) by 142.256 (total molar mass of decane) and then multiplying by 100, which yields a mass percent of 12.11%.
The mass percent of carbon in decane, C{10}H{22}, is 12.11%.
This was determined by calculating the total molar mass of decane, which is 142.256, and then dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.
to know more about decane refer here:
https://brainly.com/question/28585062#
#SPJ11
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
after the reaction reaches equilibrium at 690 k, the total pressure in the flask is 1.2 atm. what is the value of kp for the reaction at 690 k?
The value of Kp for the reaction at 690 K is 2.51 x 10-3.
At equilibrium, the total pressure in the flask is equal to the sum of the partial pressures of the reactants and products. Since the total pressure is given as 1.2 atm, the value of Kp can be calculated as follows:
Kp = (PH2*PI2)/PHI = (1.2 atm)/(PHI)
Where PH2, PI2 and PHI are the partial pressures of hydrogen gas, iodine gas and hydrogen iodide gas, respectively.
At equilibrium, the rate of forward reaction is equal to the rate of the reverse reaction. Hence, the value of Kp for the reaction at 690 K is equal to the equilibrium constant of the reaction at 690 K.
Kp = (2.51 x 10-3)690 K
Hence, the value of Kp for the reaction at 690 K is 2.51 x 10-3.
to know more about reaction refer here:
https://brainly.com/question/17434463#
#SPJ11
What is the nature of the bond indicated?
A. Nonpolar Covalent
B. Polar Covalent
C. Ionic
D. Metallic
The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.
What is a Nonpolar Covalent bond?A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.
While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.
For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.
Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.
Learn more about covalent bond here:
https://brainly.com/question/29630777
#SPJ1
calculate grxn for the reaction at -73 c under the following standard conditions at equilibrium at ph2
To calculate the Gibbs free energy change (ΔG_rxn) for the reaction at -73°C under the given standard conditions at equilibrium and pH 2, we would need the specific reaction equation, as well as the standard free energy change (ΔG°) and equilibrium constant (K) for that reaction.
Once we have those, we can use the equation ΔG_rxn = ΔG° + RTlnQ, where R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient. However, without the specific reaction details, we cannot calculate ΔG_rxn.
To further elaborate, the Gibbs free energy change (ΔG_rxn) is a measure of the spontaneity of a chemical reaction, and it can tell us whether a reaction will occur spontaneously or not.
The ΔG_rxn can be calculated using the equation ΔG_rxn = ΔG° + RTlnQ, where ΔG° is the standard free energy change of the reaction at standard conditions (usually 298 K and 1 atm), R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and Q is the reaction quotient.
The reaction quotient (Q) is the ratio of the concentrations of the products to the concentrations of the reactants at any given point in the reaction. Under standard conditions, the reaction is at equilibrium, and the reaction quotient (Q) equals the equilibrium constant (K).
If Q < K, then the reaction will proceed spontaneously in the forward direction to reach equilibrium, and ΔG_rxn will be negative.
If Q > K, then the reaction will proceed spontaneously in the reverse direction to reach equilibrium, and ΔG_rxn will be positive. If Q = K, then the reaction is at equilibrium, and ΔG_rxn will be zero.
However, to calculate the Gibbs free energy change (ΔG_rxn) for a specific reaction, we need to know the specific reaction equation, as well as the standard free energy change (ΔG°) and equilibrium constant (K) for that reaction.
These values can be experimentally determined or obtained from reference tables. Therefore, without the specific reaction details, we cannot calculate ΔG_rxn.
To learn more about equilibrium, refer below:
https://brainly.com/question/30807709
#SPJ11
a solution is made by dissolving 8424 mg of sodium chloride, nacl, in 0.1711 kg of water. what is the concentration in parts per billion?
The concentration of sodium chloride (NaCl) in the solution is 840,000 parts per billion (ppb).
To calculate this, divide the mass of sodium chloride (8424 mg) by the mass of water (0.1711 kg), then multiply the result by 1 billion (10^9).
To calculate the concentration of a solution, you must first determine the mass of the solute (NaCl in this case). The mass of the solute is given in the question as 8424 mg.
The mass of the solvent (water) is given as 0.1711 kg.
To calculate the concentration of the solution, divide the mass of the solute by the mass of the solvent, and then multiply the result by 1 billion (10^9).
In this example, 8424 mg divided by 0.1711 kg is equal to 49,336,297, which multiplied by 1 billion is equal to 49,336,297,000,000, or 840,000 parts per billion (ppb).
To know more about parts per billion click on below link:
https://brainly.com/question/13251096#
#SPJ11
a sample of 500 oxygen atoms contains a mixture of 20o (20.0040754 amu) and 23o (23.01570 amu). the weighted average of oxygen atoms 22.76272353 amu. how many 20o atoms are present in this sample?
The number of 20o atoms present in the given sample of 500 oxygen atoms is 301.
The weighted average is a measure of central tendency that takes into account the varying weights (or importance) of the different values in a data set. A weighted average is calculated by multiplying each value by its weight and dividing it by the sum of the weights. It is also referred to as a weighted mean or weighted arithmetic mean. The formula for the weighted average is,
weighted average = (w1x1 + w2x2 + w3x3 + … wn xn) / (w1 + w2 + w3 + … wn)
Where,x1, x2, x3, … xn are the values of the individual observations w1, w2, w3, … wn are the respective weights of the individual observations to solve the given problem. A sample of 500 oxygen atoms contains a mixture of 20o (20.0040754 amu) and 23o (23.01570 amu). The weighted average of oxygen atoms is 22.76272353 amu. We have to find how many 20o atoms are present in this sample.
Here,20o atoms have a mass of 20.0040754 amu23o atoms have a mass of 23.01570 amu
The average mass of 500 oxygen atoms is 22.76272353 amu. Therefore,
500 oxygen atoms weigh= 500 x 22.76272353 = 11381.36176 amu.
average atomic mass of oxygen = 20o atoms (20.0040754 amu) and 23o atoms (23.01570 amu)
Atomic mass of oxygen = [(number of 20o atoms x mass of 20o atoms) + (number of 23o atoms x mass of 23o atoms)] / Total number of oxygen atoms
Let's consider a number of 20o atoms to be ‘x’.Therefore, the number of 23o atoms = (500 - x). Substituting the given values in the above formula, we get,
22.76272353 = [(x x 20.0040754) + ((500 - x) x 23.01570)] / 50022.76272353 = (20.0040754x + 11507.825 - 23.01570x) / 50022.76272353 x 500 = 11507.825 - 3.0116246xx = 301.05 ≈ 301Number of 20o atoms = 301.
Hence, 301 number of 20o atoms are present in this sample.
You can learn more about oxygen atoms at: brainly.com/question/29695801
#SPJ11
49.2 ml of a 0.524 m solution of hno3 is titrated with fe(oh)3. it takes 85 ml of fe(oh)3 to reach the equivalence point. what is the concentration (molarity) of the fe(oh)3? answer to 2 decimal places
The Fe(OH)₃ solution has a content of 0.304 M.
In this titration, HNO₃ is the acid and Fe(OH)₃ is the base. At the equivalence point, all the H+ ions from the HNO₃ react with all the OH- ions from the Fe(OH)₃ to form water and the salt, Fe(NO₃)₃. We can use the balanced chemical equation for the reaction to determine the stoichiometric ratio of HNO₃ to Fe(OH)₃ and calculate the molarity of Fe(OH)₃.
The balanced chemical equation for the reaction is:
HNO₃ + 3Fe(OH)₃ → Fe(NO₃)₃ + 3H₂O
From the equation, we see that 1 mole of HNO₃ reacts with 3 moles of Fe(OH)₃. Therefore, the number of moles of HNO₃ in the solution can be calculated as:
moles of HNO₃ = Molarity of HNO₃ x Volume of HNO₃ solution in liters
moles of HNO₃ = 0.524 M x (49.2 mL / 1000 mL/L)
moles of HNO₃ = 0.0258 mol
At the equivalence point, the number of moles of Fe(OH)₃ added is equal to the number of moles of HNO₃ in the solution. Therefore, we can calculate the molarity of Fe(OH)₃ as:
Molarity of Fe(OH)₃ = moles of Fe(OH)₃ added / Volume of Fe(OH)₃ solution in liters
Since the volume of the Fe(OH)₃ solution added is 85 mL, or 0.085 L, we can calculate the moles of Fe(OH)₃ as:
moles of Fe(OH)₃ = moles of HNO₃ = 0.0258 mol
Therefore, the molarity of Fe(OH)₃ is
Molarity of Fe(OH)₃ = 0.0258 mol / 0.085 L
Molarity of Fe(OH)₃ = 0.304 M
Thus, the concentration (molarity) of the Fe(OH)₃ solution is 0.304 M, rounded to two decimal places.
To learn more about concentration refer to:
brainly.com/question/10725862
#SPJ4
how many moles of N2 gas are produced by the decomposition of 9.1 mol of NaN3
2 Sodium azide(s) 2 Sodium(s) + 3 Nitrogen(g) is the balanced chemical equation for the breakdown of sodium azide (Sodium azide). As a result, 13.65 moles of Nitrogen gas will be created from 9.1 mol of Sodium azide.
How does Avogadro's law contain Nitrogen?According to Avogadro's law, a gas's total number of atoms or molecules is directly proportional to the volume of gas that gas occupies at a given pressure and temperature. The formula for Avogardro's equation is V = k n or V1/n1 = V2/n2.
We can use the following ratio to determine how many moles of Nitrogen gas are created by the breakdown of 9.1 mol of Sodium azide:
2 mol Sodium azide / 3 mol Nitrogen = 9.1 mol Sodium azide/ x mol Nitrogen
where x represents the quantity of Nitrogen generated in moles.
After finding x, we obtain:
x = 9.1 mol Sodium azide × 3 mol Nitrogen / 2 mol Sodium azide
x = 13.65 mol Nitrogen
To know more about Avogadro's law visit:-
https://brainly.com/question/4133756
#SPJ9
some advantages of using photoredox dyes compared to transition metal catalysts include (select all that apply):
Some advantages of using photoredox dyes compared to transition metal catalysts include increased selectivity, cost-effectiveness, broad substrate scope, and enhanced reaction efficiency.
Selectivity refers to the ability to promote a single desired reaction and minimize unwanted side reactions. Photoredox dyes tend to have higher selectivity than transition metal catalysts, meaning they are more effective at promoting the desired reaction while reducing the formation of byproducts.
Cost-effectiveness is an important factor when it comes to chemical reactions. Photoredox dyes tend to be cheaper than transition metal catalysts, making them more appealing for those on a budget.
The broad substrate scope of photoredox dyes allows for the reaction of a wide variety of compounds, whereas transition metal catalysts are usually limited to certain types of substrates.
Finally, photoredox dyes often have enhanced reaction efficiency compared to transition metal catalysts. This means they can carry out the same reaction faster and with a higher yield.
To know more about photoredox dyes click on below link :
https://brainly.com/question/28813725#
#SPJ11
water molecules are attracted to each other and to ions due to . group of answer choices the viscosity of water. electron transfer. electron sharing. surface tension. the polarity of water molecules.
Water molecules are attracted to each other and to ions due to the polarity of water molecules.
The separation of electric charge leading to a molecule having two poles, one positive and the other negative, is referred to as polarity. A polar molecule has a permanent dipole, whereas a nonpolar molecule does not. Water is an example of a polar molecule. The polarity of water is the reason why it is a good solvent and why it is attracted to other polar molecules and ions.
In water, the polar water molecules are pulled toward each other, forming hydrogen bonds. These hydrogen bonds give water its unique properties, such as high surface tension, capillary action, and high boiling and melting points. Ions are also attracted to water due to the polar nature of water molecules. Water molecules surround ions in a process known as hydration or solvation, which stabilizes the ions in solution.
As a result of the polarity of water, it is able to dissolve a wide range of ionic and polar substances, making it one of the most significant substances on the planet.
For more such questions on polarity, click on:
https://brainly.com/question/17118815
#SPJ11
Given the reaction, how many moles of Z will be produced from 3.60 mol A, assuming excess B?
2A+3B⟶4Y+5Z
Moles of Z =
Thus, assuming there is reaction extra B, 3.60 mol of A will result in 9.00 moles of Z.
3.0 moles of zinc are converted into how many moles of hydrogen?According to the chemical equation, hydrogen gas is created when 1.0 mole of zinc combines with 1.0 mole of HCl. As a result, 3.0 moles of Zn react with 3.0 moles of hydrogen gas to form 3.0 moles of hydrogen gas.
The balanced chemical equation states that 2 moles of A and 3 moles of B combine to create 5 moles of Z.
The mole ratio of A to Z is therefore 2:5.
As a result, 3.60 moles of A will result in the following if 2 moles of A result in 5 moles of Z:
5 moles Z/2 moles A * 3.60 moles A = 9.00 moles of Z
To know more about reaction visit:-
https://brainly.com/question/28984750
#SPJ1
hat role does water play in the reaction with t-BuCl? Choose all that apply. Multiple answers: You can select more than one opt ion A. nucleophile B. solvent C. acid . base
Water plays the role of a solvent and nucleophile in the reaction with t-BuCl.
This is a substitution reaction where water is used as a solvent and a nucleophile.
What is a nucleophile?
A nucleophile is a chemical species that donates an electron pair to an electron-deficient species. In organic chemistry, nucleophiles are a class of reagents crucial in organic synthesis.
Nucleophiles are atoms or molecules that have lone pairs of electrons and are attracted to positively charged ions or atoms. They are an important class of reactants in many organic reactions, such as substitution, addition, and elimination reactions.
What is a solvent?
A solvent is a liquid that dissolves another substance, a solute, to form a homogeneous solution. Solvents can dilute, dissolve, or extract substances in various industrial and laboratory applications.
Water, ethanol, acetone, and ether are examples of common solvents.
role does water play in the reaction with t-BuCl?
Water plays the role of a solvent and nucleophile in the reaction with t-BuCl. This is a substitution reaction where water is used as a solvent and a nucleophile. Hence, the correct options are B. solvent.
#SPJ11
Learn more about nucleophiles: Draw the product of nucleophilic substitution with each neutral nucleophile. https://brainly.com/question/14052597
the difference between the free-energy content of the reactants and the free-energy content of the products is also referred to as the .
The difference between the free-energy content of the reactants and the free-energy content of the products is also referred to as the free energy change (or ΔG).
What is Gibbs free energy?The Gibbs free energy (G) is a state function that provides information about the spontaneity of a chemical reaction at a specified temperature, pressure, and concentration. It's also known as Gibbs energy or Gibbs function.It is the energy required to convert a substance from one form to another in a constant temperature and pressure environment.
Gibbs free energy indicates the maximum amount of work that a thermodynamic system can do on its surroundings during an isothermal, isobaric process. The Gibbs free energy change (ΔG) is determined by the difference between the free-energy content of the reactants and the free-energy content of the products, as you mentioned in your question.
Read more about the energy:
https://brainly.com/question/13881533
#SPJ11
In order for a six-membered ring to undergo an E2 reaction, the substituents that are to be eliminated axial must both be in ___ positions When bromine and an adjacent hydrogen are both in axial positions, the large tent-butyl substituent is in an ____ position in the trans isomer. Because a large substituent is more stable in an ___ position than in an ____ position, elimination of the ___ isomer occurs through its more stable chair conformer, whereas elimination of the ___ isomer has to occur through its less stable chair conformer. The ____ isomer, therefore, reacts more rapidly in an E2 reaction
equatorial cis axial
trans
In order for a six-membered ring to undergo an E2 reaction, the substituents that are to be eliminated axially must both be in equatorial positions.
This is because when bromine and an adjacent hydrogen are both in axial positions, the large tent-butyl substituent is in a cis position in the trans isomer.
Because a large substituent is more stable in a cis position than in an axial position, elimination of the trans isomer occurs through its more stable chair conformer, while elimination of the cis isomer has to occur through its less stable chair conformer. The cis isomer, therefore, reacts more rapidly in an E2 reaction.
because the more stable conformer has to be destabilized in order for the reaction to proceed. As a result, the reaction rate is much higher for the trans isomer than for the cis isomer.
Know more about equatorial here
https://brainly.com/question/24168112#
#SPJ11
which is the best colored indicator to use in the titration of 0.1 m ch3cooh(aq) with naoh(aq)? why? look up ka values in the appendix. indicator pka bromocresol green 4.8 bromothymol blue 6.8 phenolphthalein 9.2 group of answer choices
Answer:
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Explanation:
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
Complete the sentence.
During a chemical reaction, __________.
all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption. group of answer choices true false
The statement, "all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption," is false.
Atomic absorption and atomic emission spectroscopy are two commonly employed techniques for the determination of elements present in a sample.
The advantage of atomic emission spectroscopy over atomic absorption spectroscopy, and vice versa, is dependent on the particular sample to be analyzed.
The principle of atomic absorption spectroscopy is that an atom in the gaseous state absorbs ultraviolet or visible radiation to move from the ground state to an excited state.
As a result, the intensity of the transmitted radiation decreases in proportion to the concentration of the absorbing species.
When a sample is analyzed, the sample is vaporized and the amount of absorption is measured at a specific wavelength.
The amount of radiation that is absorbed by the sample is directly proportional to the amount of the analyte present in the sample.
This information can then be used to estimate the analyte's concentration in the original sample.In atomic emission spectroscopy, the sample is excited by a high-energy source, causing the atoms to reach a higher energy state.
The atoms will eventually return to their ground state by releasing the excess energy, which is emitted as light.
The frequency and intensity of the light emitted is used to determine the concentration of the analyte present in the sample. This process is known as atomic emission spectroscopy.
Atomic absorption spectroscopy is superior in cases where the analyte concentration is low or the sample is a complex mixture,
whereas atomic emission spectroscopy is superior when high sensitivity is required or when the sample contains multiple elements.
Thus, it can be concluded that not all atoms can be easily detected by atomic emission, and that both methods have advantages and disadvantages.
to know more about emission refer here:
https://brainly.com/question/20388835#
#SPJ11
The Quantum Theory Model seems to contradict one the above scientist's hypothesis. Who is it and why? Is there more than one?
Answer:
Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.
What do these two changes have in common?
boiling sugar to make caramel
using a large magnet to remove pieces of iron from a junkyard
Boiling sugar to make caramel and using a large magnet to remove pieces of iron from a junkyard are two very different processes, but they have one thing in common: they both involve a physical change.
A physical change is a change in a substance that does not result in the formation of a new substance with different chemical properties. In other words, the substance does not undergo a chemical reaction, but rather a change in its physical properties.
Boiling sugar to make caramel is a physical change because the sugar undergoes a change in its physical properties, such as color, texture, and taste, without undergoing a chemical reaction. The sugar molecules are heated to the point where they break down and re-form into a new substance with new properties, but the chemical composition of the sugar remains the same.
Using a large magnet to remove pieces of iron from a junkyard is also a physical change because the magnet is not altering the chemical properties of the iron, but only its physical location. The magnet is attracting and removing the iron from the junkyard, but the iron itself is not undergoing a chemical reaction.
In both cases, the substances are undergoing a physical change, but their chemical properties remain unchanged.
Learn more about Boiling sugar ,
https://brainly.com/question/27984387
#SPJ4
after pipetting the solution to be diluted into the volumetric flask, how much water should be added before the first mixing?
After pipetting the solution, the amount of water needed depends on the desired concentration and the amount of solution to be diluted.
When pipetting a solution to be diluted into a volumetric flask, the first step is to add the appropriate amount of water. The amount of water needed depends on the desired concentration and the amount of solution to be diluted. For example, if you are diluting 1 mL of a 5M solution to a 2M solution, you would need to add approximately 3 mL of water.
This can be calculated as follows:
C₁V₁ = C₂V₂
where, C₁ = initial concentration, C₂= final concentration, V₁= initial volume, V₂= final or desired volume.
Substituting the values, we can find the desired volume.
Once you have added the desired amount of water, you should mix the solution by swirling the flask or stirring the solution gently with a stirring rod. It is important to mix the solution thoroughly to ensure a uniform concentration of the solution.
Once the solution has been mixed, you should check the volume of the solution. You can do this by reading the volume at the bottom of the meniscus, which is the curved surface of the liquid. It is important to make sure that the volume is correct as this will affect the concentration of the solution.
Finally, you should adjust the volume of the solution as needed. If the volume is too high, you can remove a small amount of liquid using a pipette. If the volume is too low, you can add more water.
In summary, after pipetting the solution to be diluted into a volumetric flask, you should add the appropriate amount of water and mix the solution to get the desired concentration. You should then check the volume of the solution and adjust it as needed.
To know more about concentration refer here:
https://brainly.com/question/10725862#
#SPJ11
the energy required to break one mole of iodine-iodine bonds in i2 is 151 kj/mol. what is the longest wavelength of light capable of breaking a single i-i bond?
The longest wavelength of light capable of breaking a single I-I bond is approximately 787 nm (nanometers).
What is energy ?
Energy is considered a quantitative property that can be transferred from an object to perform work.
The energy required to break a mole of I2 molecules is 151 kJ/mol. We can use this information to calculate the energy required to break a single I-I bond:
Energy required to break a single I-I bond = Energy required to break one mole of I2 molecules / Avogadro's number
Energy required to break a single I-I bond = 151 kJ/mol / 6.022 x 10^23 molecules/mol
Energy required to break a single I-I bond = 2.51 x 10^-19 J/bond
To calculate the longest wavelength of light capable of breaking a single I-I bond, we can use the equation:
E = hc/λ
Where
E is the energy of a photon h is Planck's constant c is the speed of lightλ is the wavelength of lightWe want to find the wavelength of light that has an energy of 2.51 x 10^-19 J, so we can rearrange the equation as follows:
λ = hc/E
λ = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (2.51 x 10^-19 J)
λ = 7.87 x 10^-7 m
Therefore, the longest wavelength of light capable of breaking a single I-I bond is approximately 787 nm (nanometers).
Learn more about energy here : brainly.com/question/582060
#SPJ1
2. select the system with the greatest amount of entropy. a. pure water b. 0.500 m nacl c. 0.500 m mgcl2 d. 0.500 m alcl3
Answer: the answer is 15.009
Explanation:
A mixture of oxygen carbon dioxide and nitrogen has a total pressure of 0. 97-atm what is the partial pressure of 02 if the pco2 is 0. 70-atm and the pn2 is 0. 12-atm
The partial pressure of O2 is 0.15 atm if the pco2 is 0. 70-atm and the pn2 is 0
we have a mixture of three gases: oxygen (O2), carbon dioxide (CO2), and nitrogen (N2).
We are given the total pressure of the mixture, which is 0.97 atm, as well as the partial pressures of CO2 and N2, which are 0.70 atm and 0.12 atm, respectively.
To find the partial pressure of O2, we need to subtract the partial pressures of CO2 and N2 from the total pressure.
Partial pressure of O2 = Total pressure - Partial pressure of CO2 - Partial pressure of N2
Partial pressure of O2 = 0.97 atm - 0.70 atm - 0.12 atm
Partial pressure of O2 = 0.15 atm
Therefore, the partial pressure of O2 is 0.15 atm.
To know more about pressure click here:
brainly.com/question/12971272
#SPJ4
if a 9.48g of hydrosulfuric acid is reacte with 6.35g of silver nitrate calculate the mass in g of solid silver sulifde formed
Therefore, the mass of silver sulfide formed when 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate is 2.238 g.
When 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate, the reaction forms solid silver sulfide. The equation for this reaction is:
H₂S + 2 AgNO₃ → Ag₂S + 2 HNO₃.
To calculate the mass of silver sulfide formed, we need to use the mole ratio of the two reactants. We know that the molecular weight of silver nitrate is 169.88 g/mol and the molecular weight of hydrosulfuric acid is 34.08 g/mol.
Using the mole ratio, we can find the moles of each reactant:
9.48 g/34.08 g/mol = 0.2786 moles of H₂S and 6.35 g/169.88 g/mol = 0.0373 moles of AgNO₃.
Since the reaction forms 1 mole of Ag₂S for every 2 moles of AgNO3, we can calculate the moles of Ag₂S formed: (0.0373 moles of AgNO₃ x 1 mole of Ag₂S)/2 moles of AgNO₃ = 0.01865 moles of AgS.
Now, using the molecular weight of silver sulfide (119.97 g/mol), we can calculate the mass of silver sulfide formed: 0.01865 moles of Ag₂S x 119.97 g/mol = 2.238 g of Ag₂S.
Therefore, the mass of silver sulfide formed when 9.48 g of hydrosulfuric acid is reacted with 6.35 g of silver nitrate is 2.238 g.
To know more about silver sulfide, refer here:
https://brainly.com/question/14751616#
#SPJ11
0.40 g of sodium hydroxide ( naoh ) pellets are dissolved in water to make 2.0 l of solution. what is the ph of this solution?
The pH of the sodium hydroxide (NaOH) solution is 11.7.
Sodium hydroxide is a strong base and has a very high pH.
To calculate the pH of the solution, you must first calculate the molarity of the solution. To do this, divide the mass of sodium hydroxide by its molar mass, then divide that number by the volume of the solution.
Molarity = (0.40 g NaOH) / (40 g/mol) / (2.0 L) = 0.005 M = 5 x 10⁻³M.
The pH of a strong base is equal to its pOH plus 14. Since pOH is equal to -log[OH-], we can use the molarity of the solution to calculate the pH.
pOH = -log(5 x 10⁻³ M) = 2.30= 11.7
Therefore, the pH of the solution is equal to 14 - 2.30 = 11.7.
Therefore, 0.40 g of sodium hydroxide (NaOH) pellets dissolved in water will create a solution with a pH of 11.7.
To know more about pH, refer here:
https://brainly.com/question/491373#
#SPJ11
exposing a molecule to ir radiation causes what molecular change? electron ejection electron excitation vibrational excitation change of nuclear spin rotation of bonds
When a molecule is exposed to infrared radiation, the molecular change is c. a vibrational excitation.
Infrared radiation is a type of electromagnetic radiation that has a wavelength longer than visible light but shorter than microwaves. It is also known as heat radiation since it produces heat upon exposure to matter. Infrared radiation is used in various fields such as astronomy, meteorology, physics, and chemistry. It can detect celestial objects, measure temperature and atmospheric conditions, and identify molecular structures in chemistry.
Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule. The energy from the IR radiation is absorbed by the molecule's vibrational motion, leading to a change in the molecule's vibrational state.The absorbed energy causes the bonds in the molecule to stretch, contract, or bend. This energy can break the bonds, rearrange the atoms, or create new bonds, which leads to chemical changes in the molecule. Vibrational excitation is a common way to study molecular structure and function.
Summary, when a molecule is exposed to infrared radiation, it undergoes a vibrational excitation. Infrared radiation is a type of electromagnetic radiation that has a longer wavelength than visible light but shorter than microwaves. Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule.
Learn more about electromagnetic at:
https://brainly.com/question/29318543
#SPJ11
in both parts of the activity, you conducted a second trial without having to remix the chemicals. how was this possible?
As long as the same amount of chemicals and the same reaction conditions are used, the reaction should proceed in the same way, resulting in the same products and reactions.
Therefore, repeating the experiment using the same chemicals and conditions should yield similar results without the need to remix the chemicals. This is possible because chemical reactions follow the law of conservation of mass, which states that matter cannot be created or destroyed, only rearranged.
What is law of conservation?
The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system (in a chemical reaction or physical change) remains constant, regardless of the processes or transformations that occur within the system. In other words, matter cannot be created or destroyed, only transformed or rearranged in a chemical reaction or physical change. This law is a fundamental principle of chemistry and is widely used in chemical calculations and experiments.
To know more about chemicals, visit:
https://brainly.com/question/30970962
#SPJ1
which type of chemical reaction occurs when natural gas is burned?(1 point) responses exothermic exothermic endothermic endothermic replacement replacement decomposition
The type of chemical reaction that occurs when natural gas is burned is exothermic.
A chemical reaction is a process that leads to the formation of a new substance. During a chemical reaction, the atoms of the original substance are rearranged to create new molecules or compounds. In this process, the bonds between atoms break apart and reform, leading to the creation of new substances. Natural gas is a fossil fuel that is used to generate electricity, heat homes and buildings, and fuel vehicles. It is a hydrocarbon gas that is primarily composed of methane. It is a widely used source of energy due to its abundance, low cost, and relatively low environmental impact. An exothermic reaction is a type of chemical reaction that releases energy in the form of heat or light. During this reaction, the products of the reaction have less energy than the reactants. This energy is released into the surroundings as heat or light. The combustion of natural gas is an exothermic reaction. When natural gas is burned, it reacts with oxygen to produce carbon dioxide, water vapor, and energy. The reaction is exothermic because the energy of the products is less than the energy of the reactants, and the difference in energy is released as heat into the surroundings.Learn more about exothermic reaction: https://brainly.com/question/31025398
#SPJ11
What is the mass of 0.928 moles of Ti(SO3)2
1) You know the number of moles, you can easily work out the molar mass of Ti(SO3)2 (titanium sulfite), but you don't know the actual mass
2) By adding the mass of the atoms that make up titanium sulfite, you should get something like 207.9934 g/mol
3) To find the actual mass, you times the molar mass and the moles together
Final Answer = 193g
calculate the molarity of the two solutions. the first solution contains 0.500 mol of naoh in 2.30 l of solution.
The molarity of the first solution containing 0.500 mol of NaOH in 2.30 l of the solution is 0.217 M.
The molarity of a solution is defined as the number of moles of solute per liter of solution. In order to calculate the molarity of the given solution, we need to divide the number of moles of solute by the volume of the solution given in liters. Using the formula for molarity, we have;
Molarity = Number of moles of solute / Volume of solution in liters
Given, Number of moles of solute = 0.500 mol
Volume of solution = 2.30 L
Substitute the values of the given information into the molarity formula; Molarity = 0.500 mol / 2.30 L = 0.217 M
You can learn more about molarity at: brainly.com/question/16727614
#SPJ11
which elementary step has the highest energy of activation in the sn1 mechanism for the substitution reaction of (ch3)3coh with hx?multiple choice question.nucleophilic capture of the carbocationloss of h2o to form the intermediate carbocationprotonation of the alcohol
The highest energy of activation in the SN1 mechanism for the substitution reaction of (CH3)3COH with HX is nucleophilic capture of the carbocation.
During this step, a nucleophile (such as HX) attacks the positive charge on the carbocation, forming a new bond and breaking an existing bond.
This transition state has a higher energy of activation than the other steps in the reaction because it requires the greatest reorganization of the electron density.
Protonation of the alcohol has the second highest energy of activation. This step involves the nucleophile donating a proton to the alcohol, forming an oxonium ion.
This step requires an intermediate and is energetically favorable because the oxygen lone pair donates electron density to the carbon, stabilizing the charge.
Finally, the loss of H2O to form the intermediate carbocation is the lowest energy of activation. This step involves breaking the bond between the oxygen and the hydrogen, releasing water in the process.
This is energetically favorable because the carbocation is more stable than the alcohol.
In conclusion, the highest energy of activation in the SN1 mechanism for the substitution reaction of (CH3)3COH with HX is nucleophilic capture of the carbocation.
to know more about carbocation refer here:
https://brainly.com/question/19168427#
#SPJ11