The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
Stars are massive, luminous spheres of plasma held together by their own gravity. They are not composed of rock and metal with a high density, nor are they too big to be an asteroid but too small to be a planet. Stars do rotate on an axis and revolve around a central point, but their defining characteristic is their ability to emit light and heat through the process of nuclear fusion.
What is celestial body?
A celestial body is any object that exists in space, such as a planet, moon, asteroid, comet, star, or galaxy. Celestial bodies are natural objects that are not made by humans, and they are typically studied by astronomers and other scientists who are interested in learning more about the structure, composition, and behavior of the universe. Celestial bodies can be located within our solar system or in distant regions of space, and they can range in size from tiny rocks to massive stars and superclusters of galaxies.
To know more about celestial body, visit:
https://brainly.com/question/28876984
#SPJ1
Complete question is: The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
if a drug has a concentration of 275 mg per 10 ml, how many ml are needed to give 1 gram of the drug?
We require 36.36 milliliters of the drug solution to provide 1 gram of the drug.
A drug has a concentration of 275 mg per 10 ml. We have, volume of solution = mass of solute/concentration.
The mass of the solute (drug) is 1 gram or 1000 mg. Concentration is 275 mg/10 ml, which can be simplified to 27.5 mg/ml.
Volume of solution = mass of solute/concentration= 1000 mg/27.5 mg/ml= 36.36 ml. Therefore, we require 36.36 milliliters of the drug solution to provide 1 gram of the drug.
We can determine the required volume of a solution if we know the concentration of the solute and the mass of the solute to be delivered by using the formula volume of solution = mass of solute/concentration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
“Civics”
Qualifications for Office in the House
4. Support a Point of View with Evidence of the different informal qualifications
for membership in the House mentioned in the text, which do you think are
most significant in obtaining a seat?
To support a point of view on the informal qualifications for membership in the House of Representatives, we can refer to the Constitution
How do you support the point of view?According to Article I, Section 2 of the U.S. Constitution, a representative must be at least 25 years old, a U.S. citizen for at least seven years, and a resident of the state they represent at the time of their election. These are the formal qualifications for membership in the House.
However, there are also informal qualifications that are not spelled out in the Constitution but are still important factors in obtaining a seat in the House.
Learn more about membership in the House:https://brainly.com/question/470793
#SPJ1
g fully reacting an aldehyde with an alcohol will produce? a. an acetal b. a primary alcohol c. no reaction d. a carboxylic acid
Fully reacting an aldehyde with an alcohol will produce an acetal.
What is an acetal?
Acetal is a functional group consisting of two ether groups bonded to the same carbon atom. It's also called a 1,1-dialkoxyalkane.
Acetals are generated by the reaction of carbonyl compounds with alcohols under acidic or basic conditions.
Acetals can be used as protecting groups for carbonyls in organic synthesis. The carbonyl group is made less reactive by formation of the acetal, which shields it from further reaction.
Therefore, reaction with nucleophiles such as organolithium reagents or Grignard reagents is prevented.
To know more about aldehyde, refer here:
https://brainly.com/question/30722723#
#SPJ11
How much water can be melted with 414. KJ of energy
Assuming the ice is originally at 0°C, 414 kJ in energy can therefore melt about 1237.1 grams of ice.
How much power is required to melt one kilogramme of water?At its melting point, 1 kilogramme of ice requires 3360000 J in heat energy to become water. Q. ____ heat energy will be needed to dissolve 10 kg of ice now at melting point. (333.55 kJ kg1 is the latent fusion energy of water)
How many kilojoules (kJ) of energy are needed to evaporate one kilogramme of water?Water requires far more energy too evaporate; at air pressure and the usual normal boiling of 100 C, 1 kilogramme or liquid water would require 2256 kJ to turn into steam (water vapor).
To know more about grams visit:
https://brainly.com/question/30526303
#SPJ1
polar covalent bonds are formed when the electrons in the bond are not shared equally between the two nuclei. which one of these molecules contains polar bonds?
Polar covalent bonds are formed when the electrons in the bond are not shared equally between the two nuclei. One of these molecules contains polar bonds is H2O.
Polarity occurs when the electron pair of a bond is unevenly distributed between two atoms. A polar bond has a positive and negative end, unlike a nonpolar bond. The polarity of a bond can be determined by a difference in electronegativity between two atoms. Polar covalent bond is a type of covalent bond in which the atoms share electrons in an unequal manner.
Polar covalent bonds have a positive and a negative end. The positive end of the bond is that part of the bond that is less electronegative, whereas the negative end is that part of the bond that is more electronegative. The molecule that contains polar bonds is H2O (water), the bond between the oxygen atom and the hydrogen atoms in water is polar because the oxygen atom is more electronegative than the hydrogen atoms, causing the electrons to be drawn closer to the oxygen atom, creating a partial negative charge on the oxygen and a partial positive charge on the hydrogen atoms. As a result, water has a polarity.
Learn more about polarity at:
https://brainly.com/question/3248676
#SPJ11
an aqueous solution of iron(iii) bromide, febr3, contains 3.90 grams of iron(iii) bromide and 17.8 grams of water. the percentage by mass of iron(iii) bromide in the solution is
It is given that an aqueous solution of iron(iii) bromide, FeBr3, contains 3.90 grams of iron(iii) bromide and 17.8 grams of water. The percentage by mass of iron(iii) bromide in the solution is 18.03%.
The mass of the solution = mass of iron(iii) bromide + mass of water = 3.90 g + 17.8 g= 21.70 g
The mass percentage of iron(iii) bromide in the solution is given by the mass percentage.
Thus, mass percentage = (mass of iron(iii) bromide/mass of the solution) × 100%= (3.90/21.70) × 100%= 18.03%
Therefore, the percentage by mass of iron(iii) bromide, FeBr3, in the solution is 18.03%.
Learn more about iron(iii) bromide: https://brainly.com/question/29452093
#SPJ11
the rate constant of a certain first order reaction is 45.9s^-1 at 300k. what is the value of the rate constant at 310.0 k? the energy of activation is 81.0 kj/mol?
Answer: The value of the rate constant at 310.0 K is 54.90 s^-1.
The Arrhenius equation is used to calculate the rate constant of a reaction. It provides a way to relate the temperature of a system to the rate constant of a reaction.
Given the rate constant of a certain first-order reaction, which is 45.9 s^-1 at 300 K, and the energy of activation of 81.0 kJ/mol, we have to calculate the rate constant at 310.0 K.
What is the Arrhenius equation?
The Arrhenius equation is given by: k = Ae^(-Ea/RT)
where: k is the rate constant of the reaction, A is the pre-exponential factor or the frequency factor, Ea is the activation energy, R is the universal gas constant (8.314 J/mol K) T is the temperature in kelvin.
From the given information: k1 = 45.9 s^-1, T1 = 300 K, T2 = 310 K, and Ea = 81.0 kJ/molCalculating the rate constant at 310.0 K using the Arrhenius equation:
k2 = Ae^(-Ea/RT2)
Taking the ratio of the two equations:
k2/k1 = (Ae^(-Ea/RT2))/(Ae^(-Ea/RT1)) k2/k1 = e^(Ea/R) (1/T1 - 1/T2)
Putting in the values:
k2/45.9
= e^ (81000/8.314) (1/300 - 1/310) k2/45.9
= 1.196k2
= 54.90 s^-1
Therefore, the value of the rate constant at 310.0 K is 54.90 s^-1.
Learn more about Arrhenius equation here:
https://brainly.com/question/12907018#
#SPJ11
What is the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm?
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm can be calculated using the Ideal Gas Law. The Ideal Gas Law is expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature.
In this case, we know that the pressure is 2.05 atm and the volume is 2 L. We also know that helium is a monoatomic gas with a molar mass of 4 g/mol. We can use the universal gas constant R = 0.0821 L atm/mol K. Plugging in these values, we get:
2.05 atm × 2 L = n × 0.0821 L atm/mol K × T
Dividing both sides by 0.0821 L atm/mol K gives:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × T)
Simplifying, n = 50 T / R. We can now solve for T: n = 50 T / R => T = nR / 50
Substituting in the values we have:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × 1 mol / 4 g)
= 24.88 molT = (24.88 mol × 0.0821 L atm/mol K) / 50
= 0.04111 K or 41.11 °C.
Therefore, the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
To learn more about temperature; https://brainly.com/question/25677592
#SPJ11
41.8 moles of sulfur is equal to how many atoms of
sulfur?
A plastic container with a mass of 30 grams has a temperature increase from 20°C
to 40°C. How much heat was added to the plastic if the specific heat is 1.9 J/g °C.
How many particles are in 57.23 grams of Ni3P2?
The number of particles in 57.23 grams of trinitrogen diphosphorus is 1.447 × 10²³ particles.
How to calculate number of particle?The number of particle in a substance can be calculated by multiplying the moles of the substance by Avogadro's number as follows:
no of particles = Avogadro's number × no of moles
According to this question, there are 57.23 grams of trinitrogen diphosphorus. The molar mass of the compound is 238.028g/mol.
moles = 57.23g ÷ 238.028g/mol
moles = 0.24moles
no of particles = 0.24 moles × 6.02 × 10²³
no of particles = 1.447 × 10²³ particles
Learn more about no of particles at: https://brainly.com/question/11907018
#SPJ1
scenario: you believe that your english, math, reading, esl and/or chemistry placement is not correct, what should you do?
If you feel that your placement in English, Math, Reading, ESL and/or Chemistry is incorrect, then you should follow the steps below to resolve the issue:
Step 1: Review the Placement Criteria: The first step is to review the placement criteria for the subject. It will help you to understand the reasons behind your placement.
Step 2: Contact the Admissions Office: After reviewing the placement criteria, if you still believe that your placement is not correct, then you should contact the Admissions Office of your college or university. The Admissions Office will provide you with guidance on how to proceed.
Step 3: Submit Additional Documentation: In case you feel that your placement is incorrect, you can submit additional documentation, including test scores or academic records, to the Admissions Office.
Step 4: Appeal the Placement: If you disagree with the placement decision, you can file an appeal. You must provide reasons for the appeal, and it must be filed within a specified timeframe.
Step 5: Take a Placement Test: Finally, if you feel that your placement is not accurate, then you can take a placement test. The test will assess your skills and knowledge and provide you with a placement that is more accurate.
In conclusion, if you believe that your English, Math, Reading, ESL and/or Chemistry placement is incorrect, then you should follow the steps mentioned above. It is essential to take the necessary steps to ensure that you are placed in the correct level. The correct placement will help you to succeed in your academic journey.
To know more about Placement refer here:
https://brainly.com/question/30297866#
#SPJ11
calculate time in hours required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze if reaction proceed at room temperature
By plugging in the values for each of the parameters and solving for t, the time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze can be determined.
The time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze at room temperature depends on the specific conditions of the reaction. Generally, it will take several hours for this reaction to occur.
To calculate the exact time required, we can use the Arrhenius equation, which is given as:
k = A*e(-Ea/RT)
Where:
k = rate constant for the reaction
A = pre-exponential factor
Ea = activation energy
R = gas constant
T = temperature
The values for each of the parameters and solving for t in the equation, the time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze can be determined.
Find out about 2-chloro-2-methylpropane
https://brainly.com/question/10695884#
#SPJ11
the diagram to the right represents ice in a room, the temperature of which is above 0 c. explain why the entropy of the system is increasing
The entropy of the system is increasing. The reason for this is that entropy is a measure of disorder, and as the temperature of the room rises, the ice will begin to melt, which increases the disorder of the system.
The melting of the ice results in an increase in entropy because the solid ice has a lower entropy than the liquid water.
The melting of the ice results in an increase in entropy because the solid ice has a lower entropy than the liquid water. As the ice melts, its molecules become more disordered, and the system's entropy increases.
This increase in entropy is due to the change in the state of the system from a solid to a liquid.
Entropy is a measure of the disorder or randomness of a system. When ice is exposed to a temperature above 0°C, it begins to melt, which increases the disorder or randomness of the system.
The process of melting involves the breaking of the crystal structure of ice into random liquid water molecules. As a result, the entropy of the system increases.
Another way to look at it is that the melting of the ice results in an increase in the number of ways in which the water molecules can be arranged.
In the solid state, the water molecules are arranged in a rigid crystal lattice, which limits the number of ways in which they can be arranged.
In the liquid state, the water molecules are free to move and arrange themselves in a much greater number of ways, resulting in an increase in entropy.
The entropy of the system increases when ice is exposed to a temperature above 0°C because the melting of the ice results in an increase in the disorder or randomness of the system.
This increase in entropy is due to the change in the state of the system from a solid to a liquid, which results in an increase in the number of ways in which the water molecules can be arranged.
to know more about entropy refer here:
https://brainly.com/question/13135498#
#SPJ11
which statement is true about isotopes? responses they are the same element with different atomic masses. they are the same element with different atomic masses. they are the same element with different atomic numbers. they are the same element with different atomic numbers. they are different elements with the same atomic masses. they are different elements with the same atomic masses. they are different elements with the same atomic number.
The statement is true about isotopes is : Isotopes are the same element with different atomic masses. The statement is true about isotopes.
Isotopes are different forms of the same element that have the same number of protons in their nucleus but different numbers of neutrons.
This means they have the same atomic number but a different mass number. To find the isotopes of an element, look for the number of protons in the element's nucleus.
This number, also called the atomic number, is what identifies the element. The number of neutrons, on the other hand, can vary for different isotopes of the same element.
This is what gives each isotope a different mass number.To write an isotope, it is written in the form of element name-mass number.
For example, the isotopes of Carbon (C) are C-12, C-13, and C-14, which have 6, 7, and 8 neutrons, respectively. Isotopes are formed by natural processes such as radioactive decay or nuclear reactions.
They are also used in various applications like medical imaging, radiocarbon dating, and nuclear power generation.
to know more about isotopes refer here:
https://brainly.com/question/11680817#
#SPJ11
. for each run, why are there two peaks of voltage? why do the two peaks point in opposite directions as the magnet falls through the solenoid? why is the second peak higher than the first peak?
Answer : The two peaks of voltage observed in each run occur because of Faraday's Law of Induction. When the magnet is dropped into the solenoid, the magnetic flux through the circuit initially increases rapidly, causing the first peak of voltage to occur. This peak is negative, because the direction of the induced current opposes the change in the magnetic flux. The second peak of voltage is higher than the first peak because the magnetic flux has to be completely reversed in order for the second peak to be produced.
Faraday's Induction Law states that the voltage induced in a circuit is proportional to the rate of change of the magnetic flux through the circuit. This peak is positive, because the direction of the induced current is now in the same direction as the change in the magnetic flux.
Know more about voltage here:
https://brainly.com/question/13521443
#SPJ11
what is the conjugate base of nh3? please use subscripts for the number of atoms and superscript for the charge when writing the chemical formula, if needed.
NH2 is the conjugate base of NH3.
The conjugate base formula is what?The formula for the conjugate base is the formula for the acid minus one hydrogen. The reacting base transforms into its conjugate acid. The conjugate acid's formula is the base's formula plus one hydrogen ion.
Exists a potent conjugate base for NH3?Because it accepts a proton from acid to create the conjugate acid, NH3 is a weak base, as seen in the reaction that follows. A weak base thus produces a strong conjugate acid, proving that it is a strong base. According to this notion, NH3 is a weak base since NH4+ is a strong conjugate acid.
To know more about conjugate base visit:-
https://brainly.com/question/30225100
#SPJ1
how many moles of naoh will react with 0.50 mol of h2co3?
a. 0,25 mol NaOH
b. 0.50 mol NaOH
c. 1.0 mol NaOh
d. 2.0 mol NaOH
We will need 1.0 mol NaOH to react with 0.5 mol pf H2CO3.
Let's understand this in detail:
The balanced chemical equation of the neutralization reaction between H2CO3 and NaOH is
H2CO3 + 2NaOH ⟶ Na2CO3 + 2H2O.
We need to use the mole ratio from the balanced equation to determine how many moles of NaOH will react with 0.50 mol of H2CO3. We can see from the equation that 1 mole of H2CO3 reacts with 2 moles of NaOH.
Therefore, 0.50 mol of H2CO3 will react with
(2/1) x 0.50 = 1.0 mol of NaOH.
Answer: c. 1.0 mol NaOH.
#SPJ11
Learn more about neutralization reaction: Define Neutralisation reaction along with examples. https://brainly.com/question/23008798
a 16.7 ml sample of a 0.334 m aqueous hydrocyanic acid solution is titrated with a 0.342 m aqueous barium hydroxide solution. what is the ph at the start of the titration, before any barium hydroxide has been added?
The pH at the start of the titration, before any barium hydroxide has been added, is 5.88.
Hydrocyanic acid (HCN) is a weak acid, so we can use the equation for the ionization of HCN in water to calculate the pH of the solution:
HCN + H2O ⇌ H3O+ + CN-
The acid dissociation constant (Ka) for HCN is 4.9 x 10^-10. At the start of the titration, before any barium hydroxide has been added, the solution contains only HCN and water. We can use the initial concentration of HCN and the Ka value to calculate the initial concentration of H3O+:
Ka = [H3O+][CN-] / [HCN]
[H3O+] = √(Ka x [HCN]) = √(4.9 x 10^-10 x 0.334) = 1.32 x 10^-6 M
The pH of the solution can be calculated using the equation:
pH = -log[H3O+]
pH = -log(1.32 x 10^-6) = 5.88
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
In the menstrual system a release of an ovum is called what??
Answer:
ovulation
Explanation:
Ovulation is a phase in the menstrual cycle when your ovary releases an egg (ovum)
CHEMISTRY HELP NEEDED
Why is critical mass important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
Why is a moderator important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
Why is enrichment important for a fission chain reaction?
- it keeps the neutrons from escaping the sample
- it keeps neutrons from being absorbed by other isotopes
- it allow neutrons to e absorbed by other fissionable nuclei
- it provides enough fuel to make enough energy
1. We can see here that critical mass is important for a fission chain reaction because: C. It allow neutrons to be absorbed by other fissionable nuclei.
What is fission chain reaction?Fission chain reaction is a self-sustaining reaction in which the splitting of atomic nuclei of a particular material, such as uranium or plutonium, releases a large amount of energy in the form of heat and radiation.
2. A moderator is important for a fission chain reaction because: A. it keeps the neutrons from escaping the sample.
3. Enrichment is important for a fission chain reaction because: D. it provides enough fuel to make enough energy.
A moderator is important for a fission chain reaction because it slows down the fast-moving neutrons, making them more likely to be absorbed by other fissionable nuclei and sustain the chain reaction. Without a moderator, the neutrons would move too quickly to be efficiently absorbed.
Learn more about fission chain reaction on https://brainly.com/question/24892298
#SPJ1
how many moles of aspirin, c9h8o4, are in a tablet that contains 325 mg of aspirin? group of answer choices 0.555 moles 0.467 moles 0.357 moles 2.80 moles 0.00180 moles
The number of moles of aspirin, C₉H₈O₄, there are in a tablet that contains 325 mg of aspirin 0.00180 moles.
To calculate the number of moles of aspirin, the molar mass must first be determined. The molar mass of aspirin (C₉H₈O₄) is the sum of the atomic masses of each element in the compound, which are carbon (12.0107 g/mol), hydrogen (1.00794 g/mol), and oxygen (15.9994 g/mol). The total molar mass of aspirin is:
(9 x 12.0107) + (8 × 1.00794) + (4 × 15.9994) = 180.15 g/mol.
The number of moles of aspirin in a 325 mg tablet can be calculated by dividing its mass, 325 mg (0.325 g), by the molar mass of aspirin.
moles = mass/molar mass
Plugging in the values, we get:
moles = 325 mg(1 g/1000mg) / (180.15 g/mol) = 0.00180 moles
In conclusion, there are 0.00180 moles of aspirin, C₉H₈O₄, in a tablet that contains 325 mg of aspirin.
Learn more about moles here: https://brainly.com/question/14357742.
#SPJ11
which mode of lc would be best suited for separating sulfate (so42-), phosphate (po43-), and nitrate (no3-) in a sample of water?
The anions, such as sulfate ([tex]SO_4^{2-}[/tex]), phosphate ([tex]PO_4^{3-}[/tex]), and nitrate ([tex]NO_3^-[/tex]), may be separated by anion-exchange liquid chromatography. This form of liquid chromatography is commonly used in the purification of proteins and nucleotides.
Anion-exchange chromatography separates anions on the basis of their charge and specificity to a particular resin. Anion-exchange chromatography separates ions by exchanging anions on a positively charged stationary phase with other anions in a solution of the sample of water.
Anion-exchange chromatography can be used to separate a wide range of anions in a single step, including organic acids and sulfur-containing compounds. Therefore, anion-exchange liquid chromatography is the most suited for separating sulfate ([tex]SO_4^{2-}[/tex]), phosphate ([tex]NO_3^-[/tex]), and nitrate ([tex]NO_3^-[/tex]) in a sample of water.
Learn more about chromatography at: https://brainly.com/question/11960023
#SPJ11
it is reasonable to expect that if you inject standards greater than those you used in this lab that the calibration lines may become curved?
Yes, it is reasonable to expect that if you inject standards greater than those you used in this lab, the calibration lines may become curved. This is because higher standards create a wider dynamic range of responses which may cause the linear calibration line to become curved.
The reason for this is that the relationship between the signal and the concentration may no longer be linear if the standards are not in the same range as the analyte of interest. Calibration lines are established in analytical chemistry to relate the signal of an instrument to the concentration of a particular analyte. These lines are typically created using standards with known concentrations of the analyte. The slope and intercept of the line can be used to determine the concentration of unknown samples based on the signal they produce.
If the standards used in calibration are outside the range of the analyte, then the calibration line may not be linear. In other words, the relationship between the signal and the concentration may become curved. This can lead to inaccurate results when analyzing unknown samples.In order to ensure accurate results, it is important to adjust the injection volumes of the standards accordingly. It is also important to note that when standards are greater than those used in the lab, a larger injection volume may be needed to produce accurate results.
Therefore, it is important to use standards that are within the same range as the analyte of interest to ensure that the calibration line is linear. This will improve the accuracy and precision of the analytical method.
For more such questions on calibration , Visit:
https://brainly.com/question/31140467
#SPJ11
which of the combinations below will produce an insoluble salt? a) ba(oh)2 hcl b) mnso4 pb(no2)2 c) h2so4 albr3
The combination that will produce an insoluble salt is b) MnSO4 Pb(NO2)2.
A salt is a chemical compound made up of cations (positively charged ions) and anions (negatively charged ions) (negatively charged ions). The ions must be combined in such a way that the sum of the charges is zero. NaCl is the most well-known saltand it is made up of sodium cations (Na+) and chloride anions (Cl-).MnSO4 Pb(NO2)2 is the answer since both of these elements are soluble. MnSO4 is a soluble substance that is sometimes used in the production of ceramics.
MnSO4 is often used as a nutritional supplement for animals since it is a good source of manganese. Pb(NO2)2 is a powder that is bright yellow, it has a molar mass of 325.2 g/mol. It is made up of two NO2 anions (negatively charged ions) and one Pb2+ cation (positively charged ion).The formation of insoluble salts can occur when the cations and anions in a reaction solution bind to create a new solid. Since the newly formed solid is insoluble, it settles to the bottom of the solution and can be separated from the liquid through filtration. The insoluble salt that is formed is a white or colorless substance that appears as a powder.
Learn more about salt at:
https://brainly.com/question/13818836
#SPJ11
How many grams of CaSO4 would be produced if 200 grams of Fe2O3 reacted
As a result, we would anticipate 487.49 grams of Calcium sulfate to result from a reaction between 200 grams of Iron and Calcium sulfate.
How many kilos does one molecule weigh?Number-wise, the mass of one mole (or formula unit) in atomic mass units is equal to the mass of one mole (or formula unit) in grams. One mole of Oxygen molecules, for instance, weighs 32.00 g and a single Oxygen molecule, 32.00 u.
We can use the following chemical equation, assuming you meant to inquire about the interaction between Iron and Calcium sulfate:
Iron + Calcium sulfate → Ferrous sulfate + Calcium
These numbers can be used to determine how many moles of iron there are in 200 grams:
200 g Iron × (1 mol Iron / 55.85 g Iron) = 3.58 mol Iron
We can infer that 3.58 moles of Calcium sulfate would be formed in this reaction because the stoichiometric ratio of Iron to Calcium sulfate is 1:1.
We can use the following equation to determine the mass of Calcium sulfate generated:
Mass of Calcium sulfate= number of moles of Calcium sulfate× molar mass of Calcium sulfate
Mass of Calcium sulfate = 3.58 mol Calcium sulfate × 136.14 g/mol
Mass of Calcium sulfate = 487.49 g
To know more about molecules visit:-
https://brainly.com/question/1446104
#SPJ9
methane decomposes into two simpler substances, hydrogen and carbon. therefore, methane is a(n) .
Answer:
Methane is a compound that consists of one carbon atom and four hydrogen atoms per molecule. Methane decomposes into two simpler substances, hydrogen and carbon. Therefore, methane is a compound.
What is Methane?
Methane is a colorless, odorless, and flammable gas that has a molecular formula of CH4. Methane is the primary component of natural gas, which is formed from the decay of organic matter deep beneath the Earth's surface.
Methane is a potent greenhouse gas that is more effective at trapping heat than carbon dioxide, despite the fact that it does not remain in the atmosphere for as long.
A component is a pure substance that cannot be separated into simpler substances by physical or chemical methods. Elements and compounds are the two types of components.
Elements are the simplest forms of matter and cannot be separated into simpler substances by chemical means. On the other hand, compounds are made up of two or more elements in definite proportions and can be separated into simpler substances by chemical means.
Thus, methane is a compound.
Learn more about compounds and elements here:
https://brainly.com/question/13516179#
#SPJ11
what is the mass of metallic iron produced in course of reduction of 15.0 g of feo with 3.0 g of al? (fe
The mass of metallic iron produced in the course of the reduction of 15.0 g of FeO with 3.0 g of Al is: 12.1 g.
To calculate this, we must consider the reaction that occurs:
FeO + Al → Fe + Al2O3
In this reaction, 1 mol of FeO reacts with 1 mol of Al to produce 1 mol of Fe and 1 mol of Al2O3. Since the given mass of FeO is 15.0 g and the given mass of Al is 3.0 g, we can calculate the number of moles of each reactant with the following equation: n (reactant) = mass (reactant) ÷ molar mass (reactant)
[tex]n (FeO) = 15.0 g ÷ 71.84 g/mol = 0.2092 mol[/tex]
[tex]n (Al) = 3.0 g ÷ 26.98 g/mol = 0.1115 mol[/tex]
Therefore, since 0.2092 mol of FeO reacts with 0.1115 mol of Al, 0.2092 mol of Fe is produced. We can then calculate the mass of Fe produced with the following equation:
mass (Fe) = n (Fe) × molar mass (Fe)
mass (Fe) = 0.2092 mol × 55.85 g/mol = 11.6 g
Therefore, the mass of metallic iron produced in the course of the reduction of 15.0 g of FeO with 3.0 g of Al is 11.6 g.
To know more about iron refer here:
https://brainly.com/question/30570319#
#SPJ11
5. a 2.0 g sample of an unknown gas has a volume of 355 ml at 275 k and a pressure of 1520 mmhg. what is the molar mass of the unknown gas?
The molar mass of the unknown gas can be calculated using the Ideal Gas Law: PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
To solve for the molar mass, we need to calculate the number of moles. We can do this by rearranging the equation: n=PV/RT.
Therefore, the number of moles is (1520 mmHg x 355 mL) / (8.314 L-atm/mol-K x 275K) = 0.02814 mol.
The molar mass is equal to the mass of the sample divided by the number of moles, so the molar mass of the unknown gas is 2.0g/0.02814mol = 70.89 g/mol.
To know more about molar mass, refer here:
https://brainly.com/question/29573011#
#SPJ11
what is the relationship between intermolecular forces of attraction and the solubility of a compound in a solvent?
The relationship between intermolecular forces of attraction and the solubility of a compound in a solvent is that the stronger the intermolecular forces of attraction, the greater the solubility in a given solvent.
Intermolecular forces are forces of attraction that exist between molecules, which allow them to interact and combine in various ways. The strength of intermolecular forces has a significant impact on a substance's properties, such as boiling and melting points, as well as its solubility in various solvents.
When two substances with different intermolecular forces are mixed together, the weaker substance is typically dissolved by the stronger one. Polar solvents, for example, can dissolve polar solutes because the forces between the molecules are comparable.The polar water molecules will surround and dissolve other polar molecules, such as sodium chloride or table salt, because they are attracted to the polar charges on the molecule. When nonpolar solvents, such as hexane, are added to a polar compound, it is the opposite. The polar compound would not dissolve because the intermolecular forces are not compatible.
Learn more about polar at:
https://brainly.com/question/3248676
#SPJ11